diff options
Diffstat (limited to 'drivers/hwmon')
44 files changed, 5399 insertions, 1925 deletions
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 0e31a0c496e..e76d91906c9 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -53,7 +53,7 @@ config SENSORS_ADM1021 config SENSORS_ADM1025 tristate "Analog Devices ADM1025 and compatibles" - depends on HWMON && I2C && EXPERIMENTAL + depends on HWMON && I2C select HWMON_VID help If you say yes here you get support for Analog Devices ADM1025 @@ -94,6 +94,18 @@ config SENSORS_ADM9240 This driver can also be built as a module. If so, the module will be called adm9240. +config SENSORS_K8TEMP + tristate "AMD Athlon64/FX or Opteron temperature sensor" + depends on HWMON && X86 && PCI && EXPERIMENTAL + help + If you say yes here you get support for the temperature + sensor(s) inside your CPU. Supported is whole AMD K8 + microarchitecture. Please note that you will need at least + lm-sensors 2.10.1 for proper userspace support. + + This driver can also be built as a module. If so, the module + will be called k8temp. + config SENSORS_ASB100 tristate "Asus ASB100 Bach" depends on HWMON && I2C && EXPERIMENTAL @@ -121,7 +133,7 @@ config SENSORS_ATXP1 config SENSORS_DS1621 tristate "Dallas Semiconductor DS1621 and DS1625" - depends on HWMON && I2C && EXPERIMENTAL + depends on HWMON && I2C help If you say yes here you get support for Dallas Semiconductor DS1621 and DS1625 sensor chips. @@ -141,7 +153,7 @@ config SENSORS_F71805F config SENSORS_FSCHER tristate "FSC Hermes" - depends on HWMON && I2C && EXPERIMENTAL + depends on HWMON && I2C help If you say yes here you get support for Fujitsu Siemens Computers Hermes sensor chips. @@ -151,7 +163,7 @@ config SENSORS_FSCHER config SENSORS_FSCPOS tristate "FSC Poseidon" - depends on HWMON && I2C && EXPERIMENTAL + depends on HWMON && I2C help If you say yes here you get support for Fujitsu Siemens Computers Poseidon sensor chips. @@ -171,7 +183,7 @@ config SENSORS_GL518SM config SENSORS_GL520SM tristate "Genesys Logic GL520SM" - depends on HWMON && I2C && EXPERIMENTAL + depends on HWMON && I2C select HWMON_VID help If you say yes here you get support for Genesys Logic GL520SM @@ -186,15 +198,15 @@ config SENSORS_IT87 select I2C_ISA select HWMON_VID help - If you say yes here you get support for ITE IT87xx sensor chips - and clones: SiS960. + If you say yes here you get support for ITE IT8705F, IT8712F, + IT8716F and IT8718F sensor chips, and the SiS960 clone. This driver can also be built as a module. If so, the module will be called it87. config SENSORS_LM63 tristate "National Semiconductor LM63" - depends on HWMON && I2C && EXPERIMENTAL + depends on HWMON && I2C help If you say yes here you get support for the National Semiconductor LM63 remote diode digital temperature sensor with integrated fan @@ -231,7 +243,7 @@ config SENSORS_LM75 config SENSORS_LM77 tristate "National Semiconductor LM77" - depends on HWMON && I2C && EXPERIMENTAL + depends on HWMON && I2C help If you say yes here you get support for National Semiconductor LM77 sensor chips. @@ -241,7 +253,7 @@ config SENSORS_LM77 config SENSORS_LM78 tristate "National Semiconductor LM78 and compatibles" - depends on HWMON && I2C && EXPERIMENTAL + depends on HWMON && I2C select I2C_ISA select HWMON_VID help @@ -284,7 +296,7 @@ config SENSORS_LM85 config SENSORS_LM87 tristate "National Semiconductor LM87" - depends on HWMON && I2C && EXPERIMENTAL + depends on HWMON && I2C select HWMON_VID help If you say yes here you get support for National Semiconductor LM87 @@ -309,7 +321,7 @@ config SENSORS_LM90 config SENSORS_LM92 tristate "National Semiconductor LM92 and compatibles" - depends on HWMON && I2C && EXPERIMENTAL + depends on HWMON && I2C help If you say yes here you get support for National Semiconductor LM92 and Maxim MAX6635 sensor chips. @@ -319,7 +331,7 @@ config SENSORS_LM92 config SENSORS_MAX1619 tristate "Maxim MAX1619 sensor chip" - depends on HWMON && I2C && EXPERIMENTAL + depends on HWMON && I2C help If you say yes here you get support for MAX1619 sensor chip. @@ -354,13 +366,13 @@ config SENSORS_SIS5595 config SENSORS_SMSC47M1 tristate "SMSC LPC47M10x and compatibles" - depends on HWMON && I2C && EXPERIMENTAL + depends on HWMON && I2C select I2C_ISA help If you say yes here you get support for the integrated fan monitoring and control capabilities of the SMSC LPC47B27x, - LPC47M10x, LPC47M13x, LPC47M14x, LPC47M15x, LPC47M192 and - LPC47M997 chips. + LPC47M10x, LPC47M112, LPC47M13x, LPC47M14x, LPC47M15x, + LPC47M192 and LPC47M997 chips. The temperature and voltage sensor features of the LPC47M192 and LPC47M997 are supported by another driver, select also @@ -407,8 +419,19 @@ config SENSORS_VIA686A This driver can also be built as a module. If so, the module will be called via686a. +config SENSORS_VT1211 + tristate "VIA VT1211" + depends on HWMON && EXPERIMENTAL + select HWMON_VID + help + If you say yes here then you get support for hardware monitoring + features of the VIA VT1211 Super-I/O chip. + + This driver can also be built as a module. If so, the module + will be called vt1211. + config SENSORS_VT8231 - tristate "VT8231" + tristate "VIA VT8231" depends on HWMON && I2C && PCI && EXPERIMENTAL select HWMON_VID select I2C_ISA diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 31415843a91..af01cc64f7d 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -27,6 +27,7 @@ obj-$(CONFIG_SENSORS_GL518SM) += gl518sm.o obj-$(CONFIG_SENSORS_GL520SM) += gl520sm.o obj-$(CONFIG_SENSORS_HDAPS) += hdaps.o obj-$(CONFIG_SENSORS_IT87) += it87.o +obj-$(CONFIG_SENSORS_K8TEMP) += k8temp.o obj-$(CONFIG_SENSORS_LM63) += lm63.o obj-$(CONFIG_SENSORS_LM70) += lm70.o obj-$(CONFIG_SENSORS_LM75) += lm75.o @@ -45,6 +46,7 @@ obj-$(CONFIG_SENSORS_SMSC47B397)+= smsc47b397.o obj-$(CONFIG_SENSORS_SMSC47M1) += smsc47m1.o obj-$(CONFIG_SENSORS_SMSC47M192)+= smsc47m192.o obj-$(CONFIG_SENSORS_VIA686A) += via686a.o +obj-$(CONFIG_SENSORS_VT1211) += vt1211.o obj-$(CONFIG_SENSORS_VT8231) += vt8231.o obj-$(CONFIG_SENSORS_W83627EHF) += w83627ehf.o obj-$(CONFIG_SENSORS_W83L785TS) += w83l785ts.o diff --git a/drivers/hwmon/abituguru.c b/drivers/hwmon/abituguru.c index 35ad1b03272..b1dc63e4ac7 100644 --- a/drivers/hwmon/abituguru.c +++ b/drivers/hwmon/abituguru.c @@ -21,6 +21,7 @@ etc voltage & frequency control is not supported! */ #include <linux/module.h> +#include <linux/sched.h> #include <linux/init.h> #include <linux/slab.h> #include <linux/jiffies.h> @@ -1354,13 +1355,39 @@ LEAVE_UPDATE: return NULL; } +#ifdef CONFIG_PM +static int abituguru_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct abituguru_data *data = platform_get_drvdata(pdev); + /* make sure all communications with the uguru are done and no new + ones are started */ + mutex_lock(&data->update_lock); + return 0; +} + +static int abituguru_resume(struct platform_device *pdev) +{ + struct abituguru_data *data = platform_get_drvdata(pdev); + /* See if the uGuru is still ready */ + if (inb_p(data->addr + ABIT_UGURU_DATA) != ABIT_UGURU_STATUS_INPUT) + data->uguru_ready = 0; + mutex_unlock(&data->update_lock); + return 0; +} +#else +#define abituguru_suspend NULL +#define abituguru_resume NULL +#endif /* CONFIG_PM */ + static struct platform_driver abituguru_driver = { .driver = { .owner = THIS_MODULE, .name = ABIT_UGURU_NAME, }, - .probe = abituguru_probe, - .remove = __devexit_p(abituguru_remove), + .probe = abituguru_probe, + .remove = __devexit_p(abituguru_remove), + .suspend = abituguru_suspend, + .resume = abituguru_resume, }; static int __init abituguru_detect(void) diff --git a/drivers/hwmon/adm1021.c b/drivers/hwmon/adm1021.c index 2b6e74dd4a8..c466329b2ef 100644 --- a/drivers/hwmon/adm1021.c +++ b/drivers/hwmon/adm1021.c @@ -190,6 +190,21 @@ static int adm1021_attach_adapter(struct i2c_adapter *adapter) return i2c_probe(adapter, &addr_data, adm1021_detect); } +static struct attribute *adm1021_attributes[] = { + &dev_attr_temp1_max.attr, + &dev_attr_temp1_min.attr, + &dev_attr_temp1_input.attr, + &dev_attr_temp2_max.attr, + &dev_attr_temp2_min.attr, + &dev_attr_temp2_input.attr, + &dev_attr_alarms.attr, + NULL +}; + +static const struct attribute_group adm1021_group = { + .attrs = adm1021_attributes, +}; + static int adm1021_detect(struct i2c_adapter *adapter, int address, int kind) { int i; @@ -287,22 +302,19 @@ static int adm1021_detect(struct i2c_adapter *adapter, int address, int kind) adm1021_init_client(new_client); /* Register sysfs hooks */ + if ((err = sysfs_create_group(&new_client->dev.kobj, &adm1021_group))) + goto error2; + data->class_dev = hwmon_device_register(&new_client->dev); if (IS_ERR(data->class_dev)) { err = PTR_ERR(data->class_dev); - goto error2; + goto error3; } - device_create_file(&new_client->dev, &dev_attr_temp1_max); - device_create_file(&new_client->dev, &dev_attr_temp1_min); - device_create_file(&new_client->dev, &dev_attr_temp1_input); - device_create_file(&new_client->dev, &dev_attr_temp2_max); - device_create_file(&new_client->dev, &dev_attr_temp2_min); - device_create_file(&new_client->dev, &dev_attr_temp2_input); - device_create_file(&new_client->dev, &dev_attr_alarms); - return 0; +error3: + sysfs_remove_group(&new_client->dev.kobj, &adm1021_group); error2: i2c_detach_client(new_client); error1: @@ -326,6 +338,7 @@ static int adm1021_detach_client(struct i2c_client *client) int err; hwmon_device_unregister(data->class_dev); + sysfs_remove_group(&client->dev.kobj, &adm1021_group); if ((err = i2c_detach_client(client))) return err; diff --git a/drivers/hwmon/adm1025.c b/drivers/hwmon/adm1025.c index a4c859c9fbf..8c562885b54 100644 --- a/drivers/hwmon/adm1025.c +++ b/drivers/hwmon/adm1025.c @@ -315,6 +315,49 @@ static int adm1025_attach_adapter(struct i2c_adapter *adapter) return i2c_probe(adapter, &addr_data, adm1025_detect); } +static struct attribute *adm1025_attributes[] = { + &dev_attr_in0_input.attr, + &dev_attr_in1_input.attr, + &dev_attr_in2_input.attr, + &dev_attr_in3_input.attr, + &dev_attr_in5_input.attr, + &dev_attr_in0_min.attr, + &dev_attr_in1_min.attr, + &dev_attr_in2_min.attr, + &dev_attr_in3_min.attr, + &dev_attr_in5_min.attr, + &dev_attr_in0_max.attr, + &dev_attr_in1_max.attr, + &dev_attr_in2_max.attr, + &dev_attr_in3_max.attr, + &dev_attr_in5_max.attr, + &dev_attr_temp1_input.attr, + &dev_attr_temp2_input.attr, + &dev_attr_temp1_min.attr, + &dev_attr_temp2_min.attr, + &dev_attr_temp1_max.attr, + &dev_attr_temp2_max.attr, + &dev_attr_alarms.attr, + &dev_attr_cpu0_vid.attr, + &dev_attr_vrm.attr, + NULL +}; + +static const struct attribute_group adm1025_group = { + .attrs = adm1025_attributes, +}; + +static struct attribute *adm1025_attributes_opt[] = { + &dev_attr_in4_input.attr, + &dev_attr_in4_min.attr, + &dev_attr_in4_max.attr, + NULL +}; + +static const struct attribute_group adm1025_group_opt = { + .attrs = adm1025_attributes_opt, +}; + /* * The following function does more than just detection. If detection * succeeds, it also registers the new chip. @@ -415,46 +458,31 @@ static int adm1025_detect(struct i2c_adapter *adapter, int address, int kind) adm1025_init_client(new_client); /* Register sysfs hooks */ - data->class_dev = hwmon_device_register(&new_client->dev); - if (IS_ERR(data->class_dev)) { - err = PTR_ERR(data->class_dev); + if ((err = sysfs_create_group(&new_client->dev.kobj, &adm1025_group))) goto exit_detach; - } - - device_create_file(&new_client->dev, &dev_attr_in0_input); - device_create_file(&new_client->dev, &dev_attr_in1_input); - device_create_file(&new_client->dev, &dev_attr_in2_input); - device_create_file(&new_client->dev, &dev_attr_in3_input); - device_create_file(&new_client->dev, &dev_attr_in5_input); - device_create_file(&new_client->dev, &dev_attr_in0_min); - device_create_file(&new_client->dev, &dev_attr_in1_min); - device_create_file(&new_client->dev, &dev_attr_in2_min); - device_create_file(&new_client->dev, &dev_attr_in3_min); - device_create_file(&new_client->dev, &dev_attr_in5_min); - device_create_file(&new_client->dev, &dev_attr_in0_max); - device_create_file(&new_client->dev, &dev_attr_in1_max); - device_create_file(&new_client->dev, &dev_attr_in2_max); - device_create_file(&new_client->dev, &dev_attr_in3_max); - device_create_file(&new_client->dev, &dev_attr_in5_max); - device_create_file(&new_client->dev, &dev_attr_temp1_input); - device_create_file(&new_client->dev, &dev_attr_temp2_input); - device_create_file(&new_client->dev, &dev_attr_temp1_min); - device_create_file(&new_client->dev, &dev_attr_temp2_min); - device_create_file(&new_client->dev, &dev_attr_temp1_max); - device_create_file(&new_client->dev, &dev_attr_temp2_max); - device_create_file(&new_client->dev, &dev_attr_alarms); - device_create_file(&new_client->dev, &dev_attr_cpu0_vid); - device_create_file(&new_client->dev, &dev_attr_vrm); /* Pin 11 is either in4 (+12V) or VID4 */ if (!(config & 0x20)) { - device_create_file(&new_client->dev, &dev_attr_in4_input); - device_create_file(&new_client->dev, &dev_attr_in4_min); - device_create_file(&new_client->dev, &dev_attr_in4_max); + if ((err = device_create_file(&new_client->dev, + &dev_attr_in4_input)) + || (err = device_create_file(&new_client->dev, + &dev_attr_in4_min)) + || (err = device_create_file(&new_client->dev, + &dev_attr_in4_max))) + goto exit_remove; + } + + data->class_dev = hwmon_device_register(&new_client->dev); + if (IS_ERR(data->class_dev)) { + err = PTR_ERR(data->class_dev); + goto exit_remove; } return 0; +exit_remove: + sysfs_remove_group(&new_client->dev.kobj, &adm1025_group); + sysfs_remove_group(&new_client->dev.kobj, &adm1025_group_opt); exit_detach: i2c_detach_client(new_client); exit_free: @@ -511,6 +539,8 @@ static int adm1025_detach_client(struct i2c_client *client) int err; hwmon_device_unregister(data->class_dev); + sysfs_remove_group(&client->dev.kobj, &adm1025_group); + sysfs_remove_group(&client->dev.kobj, &adm1025_group_opt); if ((err = i2c_detach_client(client))) return err; diff --git a/drivers/hwmon/adm1026.c b/drivers/hwmon/adm1026.c index 6d4f8b8d358..b4618b2705f 100644 --- a/drivers/hwmon/adm1026.c +++ b/drivers/hwmon/adm1026.c @@ -323,15 +323,6 @@ static int adm1026_attach_adapter(struct i2c_adapter *adapter) return i2c_probe(adapter, &addr_data, adm1026_detect); } -static int adm1026_detach_client(struct i2c_client *client) -{ - struct adm1026_data *data = i2c_get_clientdata(client); - hwmon_device_unregister(data->class_dev); - i2c_detach_client(client); - kfree(data); - return 0; -} - static int adm1026_read_value(struct i2c_client *client, u8 reg) { int res; @@ -1450,6 +1441,135 @@ static DEVICE_ATTR(temp1_auto_point2_pwm, S_IRUGO, show_auto_pwm_max, NULL); static DEVICE_ATTR(temp2_auto_point2_pwm, S_IRUGO, show_auto_pwm_max, NULL); static DEVICE_ATTR(temp3_auto_point2_pwm, S_IRUGO, show_auto_pwm_max, NULL); +static struct attribute *adm1026_attributes[] = { + &sensor_dev_attr_in0_input.dev_attr.attr, + &sensor_dev_attr_in0_max.dev_attr.attr, + &sensor_dev_attr_in0_min.dev_attr.attr, + &sensor_dev_attr_in1_input.dev_attr.attr, + &sensor_dev_attr_in1_max.dev_attr.attr, + &sensor_dev_attr_in1_min.dev_attr.attr, + &sensor_dev_attr_in2_input.dev_attr.attr, + &sensor_dev_attr_in2_max.dev_attr.attr, + &sensor_dev_attr_in2_min.dev_attr.attr, + &sensor_dev_attr_in3_input.dev_attr.attr, + &sensor_dev_attr_in3_max.dev_attr.attr, + &sensor_dev_attr_in3_min.dev_attr.attr, + &sensor_dev_attr_in4_input.dev_attr.attr, + &sensor_dev_attr_in4_max.dev_attr.attr, + &sensor_dev_attr_in4_min.dev_attr.attr, + &sensor_dev_attr_in5_input.dev_attr.attr, + &sensor_dev_attr_in5_max.dev_attr.attr, + &sensor_dev_attr_in5_min.dev_attr.attr, + &sensor_dev_attr_in6_input.dev_attr.attr, + &sensor_dev_attr_in6_max.dev_attr.attr, + &sensor_dev_attr_in6_min.dev_attr.attr, + &sensor_dev_attr_in7_input.dev_attr.attr, + &sensor_dev_attr_in7_max.dev_attr.attr, + &sensor_dev_attr_in7_min.dev_attr.attr, + &sensor_dev_attr_in8_input.dev_attr.attr, + &sensor_dev_attr_in8_max.dev_attr.attr, + &sensor_dev_attr_in8_min.dev_attr.attr, + &sensor_dev_attr_in9_input.dev_attr.attr, + &sensor_dev_attr_in9_max.dev_attr.attr, + &sensor_dev_attr_in9_min.dev_attr.attr, + &sensor_dev_attr_in10_input.dev_attr.attr, + &sensor_dev_attr_in10_max.dev_attr.attr, + &sensor_dev_attr_in10_min.dev_attr.attr, + &sensor_dev_attr_in11_input.dev_attr.attr, + &sensor_dev_attr_in11_max.dev_attr.attr, + &sensor_dev_attr_in11_min.dev_attr.attr, + &sensor_dev_attr_in12_input.dev_attr.attr, + &sensor_dev_attr_in12_max.dev_attr.attr, + &sensor_dev_attr_in12_min.dev_attr.attr, + &sensor_dev_attr_in13_input.dev_attr.attr, + &sensor_dev_attr_in13_max.dev_attr.attr, + &sensor_dev_attr_in13_min.dev_attr.attr, + &sensor_dev_attr_in14_input.dev_attr.attr, + &sensor_dev_attr_in14_max.dev_attr.attr, + &sensor_dev_attr_in14_min.dev_attr.attr, + &sensor_dev_attr_in15_input.dev_attr.attr, + &sensor_dev_attr_in15_max.dev_attr.attr, + &sensor_dev_attr_in15_min.dev_attr.attr, + &sensor_dev_attr_in16_input.dev_attr.attr, + &sensor_dev_attr_in16_max.dev_attr.attr, + &sensor_dev_attr_in16_min.dev_attr.attr, + &sensor_dev_attr_fan1_input.dev_attr.attr, + &sensor_dev_attr_fan1_div.dev_attr.attr, + &sensor_dev_attr_fan1_min.dev_attr.attr, + &sensor_dev_attr_fan2_input.dev_attr.attr, + &sensor_dev_attr_fan2_div.dev_attr.attr, + &sensor_dev_attr_fan2_min.dev_attr.attr, + &sensor_dev_attr_fan3_input.dev_attr.attr, + &sensor_dev_attr_fan3_div.dev_attr.attr, + &sensor_dev_attr_fan3_min.dev_attr.attr, + &sensor_dev_attr_fan4_input.dev_attr.attr, + &sensor_dev_attr_fan4_div.dev_attr.attr, + &sensor_dev_attr_fan4_min.dev_attr.attr, + &sensor_dev_attr_fan5_input.dev_attr.attr, + &sensor_dev_attr_fan5_div.dev_attr.attr, + &sensor_dev_attr_fan5_min.dev_attr.attr, + &sensor_dev_attr_fan6_input.dev_attr.attr, + &sensor_dev_attr_fan6_div.dev_attr.attr, + &sensor_dev_attr_fan6_min.dev_attr.attr, + &sensor_dev_attr_fan7_input.dev_attr.attr, + &sensor_dev_attr_fan7_div.dev_attr.attr, + &sensor_dev_attr_fan7_min.dev_attr.attr, + &sensor_dev_attr_fan8_input.dev_attr.attr, + &sensor_dev_attr_fan8_div.dev_attr.attr, + &sensor_dev_attr_fan8_min.dev_attr.attr, + &sensor_dev_attr_temp1_input.dev_attr.attr, + &sensor_dev_attr_temp1_max.dev_attr.attr, + &sensor_dev_attr_temp1_min.dev_attr.attr, + &sensor_dev_attr_temp2_input.dev_attr.attr, + &sensor_dev_attr_temp2_max.dev_attr.attr, + &sensor_dev_attr_temp2_min.dev_attr.attr, + &sensor_dev_attr_temp3_input.dev_attr.attr, + &sensor_dev_attr_temp3_max.dev_attr.attr, + &sensor_dev_attr_temp3_min.dev_attr.attr, + &sensor_dev_attr_temp1_offset.dev_attr.attr, + &sensor_dev_attr_temp2_offset.dev_attr.attr, + &sensor_dev_attr_temp3_offset.dev_attr.attr, + &sensor_dev_attr_temp1_auto_point1_temp.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point1_temp.dev_attr.attr, + &sensor_dev_attr_temp3_auto_point1_temp.dev_attr.attr, + &sensor_dev_attr_temp1_auto_point1_temp_hyst.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point1_temp_hyst.dev_attr.attr, + &sensor_dev_attr_temp3_auto_point1_temp_hyst.dev_attr.attr, + &sensor_dev_attr_temp1_auto_point2_temp.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point2_temp.dev_attr.attr, + &sensor_dev_attr_temp3_auto_point2_temp.dev_attr.attr, + &sensor_dev_attr_temp1_crit.dev_attr.attr, + &sensor_dev_attr_temp2_crit.dev_attr.attr, + &sensor_dev_attr_temp3_crit.dev_attr.attr, + &dev_attr_temp1_crit_enable.attr, + &dev_attr_temp2_crit_enable.attr, + &dev_attr_temp3_crit_enable.attr, + &dev_attr_cpu0_vid.attr, + &dev_attr_vrm.attr, + &dev_attr_alarms.attr, + &dev_attr_alarm_mask.attr, + &dev_attr_gpio.attr, + &dev_attr_gpio_mask.attr, + &dev_attr_pwm1.attr, + &dev_attr_pwm2.attr, + &dev_attr_pwm3.attr, + &dev_attr_pwm1_enable.attr, + &dev_attr_pwm2_enable.attr, + &dev_attr_pwm3_enable.attr, + &dev_attr_temp1_auto_point1_pwm.attr, + &dev_attr_temp2_auto_point1_pwm.attr, + &dev_attr_temp3_auto_point1_pwm.attr, + &dev_attr_temp1_auto_point2_pwm.attr, + &dev_attr_temp2_auto_point2_pwm.attr, + &dev_attr_temp3_auto_point2_pwm.attr, + &dev_attr_analog_out.attr, + NULL +}; + +static const struct attribute_group adm1026_group = { + .attrs = adm1026_attributes, +}; + static int adm1026_detect(struct i2c_adapter *adapter, int address, int kind) { @@ -1554,145 +1674,20 @@ static int adm1026_detect(struct i2c_adapter *adapter, int address, adm1026_init_client(new_client); /* Register sysfs hooks */ + if ((err = sysfs_create_group(&new_client->dev.kobj, &adm1026_group))) + goto exitdetach; + data->class_dev = hwmon_device_register(&new_client->dev); if (IS_ERR(data->class_dev)) { err = PTR_ERR(data->class_dev); - goto exitdetach; + goto exitremove; } - device_create_file(&new_client->dev, &sensor_dev_attr_in0_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in0_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in0_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in1_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in1_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in1_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in2_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in2_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in2_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in3_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in3_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in3_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in4_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in4_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in4_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in5_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in5_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in5_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in6_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in6_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in6_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in7_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in7_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in7_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in8_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in8_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in8_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in9_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in9_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in9_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in10_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in10_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in10_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in11_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in11_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in11_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in12_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in12_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in12_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in13_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in13_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in13_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in14_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in14_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in14_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in15_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in15_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in15_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in16_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in16_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in16_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_fan1_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_fan1_div.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_fan1_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_fan2_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_fan2_div.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_fan2_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_fan3_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_fan3_div.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_fan3_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_fan4_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_fan4_div.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_fan4_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_fan5_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_fan5_div.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_fan5_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_fan6_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_fan6_div.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_fan6_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_fan7_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_fan7_div.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_fan7_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_fan8_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_fan8_div.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_fan8_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp1_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp1_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp1_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp2_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp2_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp2_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp3_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp3_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp3_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp1_offset.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp2_offset.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp3_offset.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_temp1_auto_point1_temp.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_temp2_auto_point1_temp.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_temp3_auto_point1_temp.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_temp1_auto_point1_temp_hyst.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_temp2_auto_point1_temp_hyst.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_temp3_auto_point1_temp_hyst.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_temp1_auto_point2_temp.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_temp2_auto_point2_temp.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_temp3_auto_point2_temp.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp1_crit.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp2_crit.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp3_crit.dev_attr); - device_create_file(&new_client->dev, &dev_attr_temp1_crit_enable); - device_create_file(&new_client->dev, &dev_attr_temp2_crit_enable); - device_create_file(&new_client->dev, &dev_attr_temp3_crit_enable); - device_create_file(&new_client->dev, &dev_attr_cpu0_vid); - device_create_file(&new_client->dev, &dev_attr_vrm); - device_create_file(&new_client->dev, &dev_attr_alarms); - device_create_file(&new_client->dev, &dev_attr_alarm_mask); - device_create_file(&new_client->dev, &dev_attr_gpio); - device_create_file(&new_client->dev, &dev_attr_gpio_mask); - device_create_file(&new_client->dev, &dev_attr_pwm1); - device_create_file(&new_client->dev, &dev_attr_pwm2); - device_create_file(&new_client->dev, &dev_attr_pwm3); - device_create_file(&new_client->dev, &dev_attr_pwm1_enable); - device_create_file(&new_client->dev, &dev_attr_pwm2_enable); - device_create_file(&new_client->dev, &dev_attr_pwm3_enable); - device_create_file(&new_client->dev, &dev_attr_temp1_auto_point1_pwm); - device_create_file(&new_client->dev, &dev_attr_temp2_auto_point1_pwm); - device_create_file(&new_client->dev, &dev_attr_temp3_auto_point1_pwm); - device_create_file(&new_client->dev, &dev_attr_temp1_auto_point2_pwm); - device_create_file(&new_client->dev, &dev_attr_temp2_auto_point2_pwm); - device_create_file(&new_client->dev, &dev_attr_temp3_auto_point2_pwm); - device_create_file(&new_client->dev, &dev_attr_analog_out); return 0; /* Error out and cleanup code */ +exitremove: + sysfs_remove_group(&new_client->dev.kobj, &adm1026_group); exitdetach: i2c_detach_client(new_client); exitfree: @@ -1700,6 +1695,17 @@ exitfree: exit: return err; } + +static int adm1026_detach_client(struct i2c_client *client) +{ + struct adm1026_data *data = i2c_get_clientdata(client); + hwmon_device_unregister(data->class_dev); + sysfs_remove_group(&client->dev.kobj, &adm1026_group); + i2c_detach_client(client); + kfree(data); + return 0; +} + static int __init sm_adm1026_init(void) { return i2c_add_driver(&adm1026_driver); diff --git a/drivers/hwmon/adm1031.c b/drivers/hwmon/adm1031.c index 3bf2da621ae..122683fc91d 100644 --- a/drivers/hwmon/adm1031.c +++ b/drivers/hwmon/adm1031.c @@ -730,6 +730,61 @@ static int adm1031_attach_adapter(struct i2c_adapter *adapter) return i2c_probe(adapter, &addr_data, adm1031_detect); } +static struct attribute *adm1031_attributes[] = { + &dev_attr_fan1_input.attr, + &dev_attr_fan1_div.attr, + &dev_attr_fan1_min.attr, + &dev_attr_pwm1.attr, + &dev_attr_auto_fan1_channel.attr, + &dev_attr_temp1_input.attr, + &dev_attr_temp1_min.attr, + &dev_attr_temp1_max.attr, + &dev_attr_temp1_crit.attr, + &dev_attr_temp2_input.attr, + &dev_attr_temp2_min.attr, + &dev_attr_temp2_max.attr, + &dev_attr_temp2_crit.attr, + + &dev_attr_auto_temp1_off.attr, + &dev_attr_auto_temp1_min.attr, + &dev_attr_auto_temp1_max.attr, + + &dev_attr_auto_temp2_off.attr, + &dev_attr_auto_temp2_min.attr, + &dev_attr_auto_temp2_max.attr, + + &dev_attr_auto_fan1_min_pwm.attr, + + &dev_attr_alarms.attr, + + NULL +}; + +static const struct attribute_group adm1031_group = { + .attrs = adm1031_attributes, +}; + +static struct attribute *adm1031_attributes_opt[] = { + &dev_attr_fan2_input.attr, + &dev_attr_fan2_div.attr, + &dev_attr_fan2_min.attr, + &dev_attr_pwm2.attr, + &dev_attr_auto_fan2_channel.attr, + &dev_attr_temp3_input.attr, + &dev_attr_temp3_min.attr, + &dev_attr_temp3_max.attr, + &dev_attr_temp3_crit.attr, + &dev_attr_auto_temp3_off.attr, + &dev_attr_auto_temp3_min.attr, + &dev_attr_auto_temp3_max.attr, + &dev_attr_auto_fan2_min_pwm.attr, + NULL +}; + +static const struct attribute_group adm1031_group_opt = { + .attrs = adm1031_attributes_opt, +}; + /* This function is called by i2c_probe */ static int adm1031_detect(struct i2c_adapter *adapter, int address, int kind) { @@ -789,57 +844,26 @@ static int adm1031_detect(struct i2c_adapter *adapter, int address, int kind) adm1031_init_client(new_client); /* Register sysfs hooks */ - data->class_dev = hwmon_device_register(&new_client->dev); - if (IS_ERR(data->class_dev)) { - err = PTR_ERR(data->class_dev); + if ((err = sysfs_create_group(&new_client->dev.kobj, &adm1031_group))) goto exit_detach; - } - - device_create_file(&new_client->dev, &dev_attr_fan1_input); - device_create_file(&new_client->dev, &dev_attr_fan1_div); - device_create_file(&new_client->dev, &dev_attr_fan1_min); - device_create_file(&new_client->dev, &dev_attr_pwm1); - device_create_file(&new_client->dev, &dev_attr_auto_fan1_channel); - device_create_file(&new_client->dev, &dev_attr_temp1_input); - device_create_file(&new_client->dev, &dev_attr_temp1_min); - device_create_file(&new_client->dev, &dev_attr_temp1_max); - device_create_file(&new_client->dev, &dev_attr_temp1_crit); - device_create_file(&new_client->dev, &dev_attr_temp2_input); - device_create_file(&new_client->dev, &dev_attr_temp2_min); - device_create_file(&new_client->dev, &dev_attr_temp2_max); - device_create_file(&new_client->dev, &dev_attr_temp2_crit); - - device_create_file(&new_client->dev, &dev_attr_auto_temp1_off); - device_create_file(&new_client->dev, &dev_attr_auto_temp1_min); - device_create_file(&new_client->dev, &dev_attr_auto_temp1_max); - - device_create_file(&new_client->dev, &dev_attr_auto_temp2_off); - device_create_file(&new_client->dev, &dev_attr_auto_temp2_min); - device_create_file(&new_client->dev, &dev_attr_auto_temp2_max); - - device_create_file(&new_client->dev, &dev_attr_auto_fan1_min_pwm); - - device_create_file(&new_client->dev, &dev_attr_alarms); if (kind == adm1031) { - device_create_file(&new_client->dev, &dev_attr_fan2_input); - device_create_file(&new_client->dev, &dev_attr_fan2_div); - device_create_file(&new_client->dev, &dev_attr_fan2_min); - device_create_file(&new_client->dev, &dev_attr_pwm2); - device_create_file(&new_client->dev, - &dev_attr_auto_fan2_channel); - device_create_file(&new_client->dev, &dev_attr_temp3_input); - device_create_file(&new_client->dev, &dev_attr_temp3_min); - device_create_file(&new_client->dev, &dev_attr_temp3_max); - device_create_file(&new_client->dev, &dev_attr_temp3_crit); - device_create_file(&new_client->dev, &dev_attr_auto_temp3_off); - device_create_file(&new_client->dev, &dev_attr_auto_temp3_min); - device_create_file(&new_client->dev, &dev_attr_auto_temp3_max); - device_create_file(&new_client->dev, &dev_attr_auto_fan2_min_pwm); + if ((err = sysfs_create_group(&new_client->dev.kobj, + &adm1031_group_opt))) + goto exit_remove; + } + + data->class_dev = hwmon_device_register(&new_client->dev); + if (IS_ERR(data->class_dev)) { + err = PTR_ERR(data->class_dev); + goto exit_remove; } return 0; +exit_remove: + sysfs_remove_group(&new_client->dev.kobj, &adm1031_group); + sysfs_remove_group(&new_client->dev.kobj, &adm1031_group_opt); exit_detach: i2c_detach_client(new_client); exit_free: @@ -854,6 +878,8 @@ static int adm1031_detach_client(struct i2c_client *client) int ret; hwmon_device_unregister(data->class_dev); + sysfs_remove_group(&client->dev.kobj, &adm1031_group); + sysfs_remove_group(&client->dev.kobj, &adm1031_group_opt); if ((ret = i2c_detach_client(client)) != 0) { return ret; } diff --git a/drivers/hwmon/adm9240.c b/drivers/hwmon/adm9240.c index 43f6991b588..aad594adf0c 100644 --- a/drivers/hwmon/adm9240.c +++ b/drivers/hwmon/adm9240.c @@ -5,7 +5,7 @@ * Copyright (C) 1999 Frodo Looijaard <frodol@dds.nl> * Philip Edelbrock <phil@netroedge.com> * Copyright (C) 2003 Michiel Rook <michiel@grendelproject.nl> - * Copyright (C) 2005 Grant Coady <gcoady@gmail.com> with valuable + * Copyright (C) 2005 Grant Coady <gcoady.lk@gmail.com> with valuable * guidance from Jean Delvare * * Driver supports Analog Devices ADM9240 @@ -465,6 +465,45 @@ static ssize_t chassis_clear(struct device *dev, } static DEVICE_ATTR(chassis_clear, S_IWUSR, NULL, chassis_clear); +static struct attribute *adm9240_attributes[] = { + &sensor_dev_attr_in0_input.dev_attr.attr, + &sensor_dev_attr_in0_min.dev_attr.attr, + &sensor_dev_attr_in0_max.dev_attr.attr, + &sensor_dev_attr_in1_input.dev_attr.attr, + &sensor_dev_attr_in1_min.dev_attr.attr, + &sensor_dev_attr_in1_max.dev_attr.attr, + &sensor_dev_attr_in2_input.dev_attr.attr, + &sensor_dev_attr_in2_min.dev_attr.attr, + &sensor_dev_attr_in2_max.dev_attr.attr, + &sensor_dev_attr_in3_input.dev_attr.attr, + &sensor_dev_attr_in3_min.dev_attr.attr, + &sensor_dev_attr_in3_max.dev_attr.attr, + &sensor_dev_attr_in4_input.dev_attr.attr, + &sensor_dev_attr_in4_min.dev_attr.attr, + &sensor_dev_attr_in4_max.dev_attr.attr, + &sensor_dev_attr_in5_input.dev_attr.attr, + &sensor_dev_attr_in5_min.dev_attr.attr, + &sensor_dev_attr_in5_max.dev_attr.attr, + &dev_attr_temp1_input.attr, + &sensor_dev_attr_temp1_max.dev_attr.attr, + &sensor_dev_attr_temp1_max_hyst.dev_attr.attr, + &sensor_dev_attr_fan1_input.dev_attr.attr, + &sensor_dev_attr_fan1_div.dev_attr.attr, + &sensor_dev_attr_fan1_min.dev_attr.attr, + &sensor_dev_attr_fan2_input.dev_attr.attr, + &sensor_dev_attr_fan2_div.dev_attr.attr, + &sensor_dev_attr_fan2_min.dev_attr.attr, + &dev_attr_alarms.attr, + &dev_attr_aout_output.attr, + &dev_attr_chassis_clear.attr, + &dev_attr_cpu0_vid.attr, + NULL +}; + +static const struct attribute_group adm9240_group = { + .attrs = adm9240_attributes, +}; + /*** sensor chip detect and driver install ***/ @@ -548,72 +587,19 @@ static int adm9240_detect(struct i2c_adapter *adapter, int address, int kind) adm9240_init_client(new_client); /* populate sysfs filesystem */ + if ((err = sysfs_create_group(&new_client->dev.kobj, &adm9240_group))) + goto exit_detach; + data->class_dev = hwmon_device_register(&new_client->dev); if (IS_ERR(data->class_dev)) { err = PTR_ERR(data->class_dev); - goto exit_detach; + goto exit_remove; } - device_create_file(&new_client->dev, - &sensor_dev_attr_in0_input.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_in0_min.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_in0_max.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_in1_input.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_in1_min.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_in1_max.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_in2_input.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_in2_min.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_in2_max.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_in3_input.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_in3_min.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_in3_max.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_in4_input.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_in4_min.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_in4_max.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_in5_input.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_in5_min.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_in5_max.dev_attr); - device_create_file(&new_client->dev, &dev_attr_temp1_input); - device_create_file(&new_client->dev, - &sensor_dev_attr_temp1_max.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_temp1_max_hyst.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_fan1_input.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_fan1_div.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_fan1_min.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_fan2_input.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_fan2_div.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_fan2_min.dev_attr); - device_create_file(&new_client->dev, &dev_attr_alarms); - device_create_file(&new_client->dev, &dev_attr_aout_output); - device_create_file(&new_client->dev, &dev_attr_chassis_clear); - device_create_file(&new_client->dev, &dev_attr_cpu0_vid); - return 0; +exit_remove: + sysfs_remove_group(&new_client->dev.kobj, &adm9240_group); exit_detach: i2c_detach_client(new_client); exit_free: @@ -635,6 +621,7 @@ static int adm9240_detach_client(struct i2c_client *client) int err; hwmon_device_unregister(data->class_dev); + sysfs_remove_group(&client->dev.kobj, &adm9240_group); if ((err = i2c_detach_client(client))) return err; @@ -787,7 +774,7 @@ static void __exit sensors_adm9240_exit(void) } MODULE_AUTHOR("Michiel Rook <michiel@grendelproject.nl>, " - "Grant Coady <gcoady@gmail.com> and others"); + "Grant Coady <gcoady.lk@gmail.com> and others"); MODULE_DESCRIPTION("ADM9240/DS1780/LM81 driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/hwmon/asb100.c b/drivers/hwmon/asb100.c index facc1ccb833..57b1c7b7ac3 100644 --- a/drivers/hwmon/asb100.c +++ b/drivers/hwmon/asb100.c @@ -298,12 +298,6 @@ sysfs_in(4); sysfs_in(5); sysfs_in(6); -#define device_create_file_in(client, offset) do { \ - device_create_file(&client->dev, &dev_attr_in##offset##_input); \ - device_create_file(&client->dev, &dev_attr_in##offset##_min); \ - device_create_file(&client->dev, &dev_attr_in##offset##_max); \ -} while (0) - /* 3 Fans */ static ssize_t show_fan(struct device *dev, char *buf, int nr) { @@ -421,12 +415,6 @@ sysfs_fan(1); sysfs_fan(2); sysfs_fan(3); -#define device_create_file_fan(client, offset) do { \ - device_create_file(&client->dev, &dev_attr_fan##offset##_input); \ - device_create_file(&client->dev, &dev_attr_fan##offset##_min); \ - device_create_file(&client->dev, &dev_attr_fan##offset##_div); \ -} while (0) - /* 4 Temp. Sensors */ static int sprintf_temp_from_reg(u16 reg, char *buf, int nr) { @@ -515,12 +503,6 @@ sysfs_temp(3); sysfs_temp(4); /* VID */ -#define device_create_file_temp(client, num) do { \ - device_create_file(&client->dev, &dev_attr_temp##num##_input); \ - device_create_file(&client->dev, &dev_attr_temp##num##_max); \ - device_create_file(&client->dev, &dev_attr_temp##num##_max_hyst); \ -} while (0) - static ssize_t show_vid(struct device *dev, struct device_attribute *attr, char *buf) { struct asb100_data *data = asb100_update_device(dev); @@ -528,8 +510,6 @@ static ssize_t show_vid(struct device *dev, struct device_attribute *attr, char } static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid, NULL); -#define device_create_file_vid(client) \ -device_create_file(&client->dev, &dev_attr_cpu0_vid) /* VRM */ static ssize_t show_vrm(struct device *dev, struct device_attribute *attr, char *buf) @@ -549,8 +529,6 @@ static ssize_t set_vrm(struct device *dev, struct device_attribute *attr, const /* Alarms */ static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm, set_vrm); -#define device_create_file_vrm(client) \ -device_create_file(&client->dev, &dev_attr_vrm); static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, char *buf) { @@ -559,8 +537,6 @@ static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, ch } static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); -#define device_create_file_alarms(client) \ -device_create_file(&client->dev, &dev_attr_alarms) /* 1 PWM */ static ssize_t show_pwm1(struct device *dev, struct device_attribute *attr, char *buf) @@ -607,10 +583,65 @@ static ssize_t set_pwm_enable1(struct device *dev, struct device_attribute *attr static DEVICE_ATTR(pwm1, S_IRUGO | S_IWUSR, show_pwm1, set_pwm1); static DEVICE_ATTR(pwm1_enable, S_IRUGO | S_IWUSR, show_pwm_enable1, set_pwm_enable1); -#define device_create_file_pwm1(client) do { \ - device_create_file(&new_client->dev, &dev_attr_pwm1); \ - device_create_file(&new_client->dev, &dev_attr_pwm1_enable); \ -} while (0) + +static struct attribute *asb100_attributes[] = { + &dev_attr_in0_input.attr, + &dev_attr_in0_min.attr, + &dev_attr_in0_max.attr, + &dev_attr_in1_input.attr, + &dev_attr_in1_min.attr, + &dev_attr_in1_max.attr, + &dev_attr_in2_input.attr, + &dev_attr_in2_min.attr, + &dev_attr_in2_max.attr, + &dev_attr_in3_input.attr, + &dev_attr_in3_min.attr, + &dev_attr_in3_max.attr, + &dev_attr_in4_input.attr, + &dev_attr_in4_min.attr, + &dev_attr_in4_max.attr, + &dev_attr_in5_input.attr, + &dev_attr_in5_min.attr, + &dev_attr_in5_max.attr, + &dev_attr_in6_input.attr, + &dev_attr_in6_min.attr, + &dev_attr_in6_max.attr, + + &dev_attr_fan1_input.attr, + &dev_attr_fan1_min.attr, + &dev_attr_fan1_div.attr, + &dev_attr_fan2_input.attr, + &dev_attr_fan2_min.attr, + &dev_attr_fan2_div.attr, + &dev_attr_fan3_input.attr, + &dev_attr_fan3_min.attr, + &dev_attr_fan3_div.attr, + + &dev_attr_temp1_input.attr, + &dev_attr_temp1_max.attr, + &dev_attr_temp1_max_hyst.attr, + &dev_attr_temp2_input.attr, + &dev_attr_temp2_max.attr, + &dev_attr_temp2_max_hyst.attr, + &dev_attr_temp3_input.attr, + &dev_attr_temp3_max.attr, + &dev_attr_temp3_max_hyst.attr, + &dev_attr_temp4_input.attr, + &dev_attr_temp4_max.attr, + &dev_attr_temp4_max_hyst.attr, + + &dev_attr_cpu0_vid.attr, + &dev_attr_vrm.attr, + &dev_attr_alarms.attr, + &dev_attr_pwm1.attr, + &dev_attr_pwm1_enable.attr, + + NULL +}; + +static const struct attribute_group asb100_group = { + .attrs = asb100_attributes, +}; /* This function is called when: asb100_driver is inserted (when this module is loaded), for each @@ -810,38 +841,19 @@ static int asb100_detect(struct i2c_adapter *adapter, int address, int kind) data->fan_min[2] = asb100_read_value(new_client, ASB100_REG_FAN_MIN(2)); /* Register sysfs hooks */ + if ((err = sysfs_create_group(&new_client->dev.kobj, &asb100_group))) + goto ERROR3; + data->class_dev = hwmon_device_register(&new_client->dev); if (IS_ERR(data->class_dev)) { err = PTR_ERR(data->class_dev); - goto ERROR3; + goto ERROR4; } - device_create_file_in(new_client, 0); - device_create_file_in(new_client, 1); - device_create_file_in(new_client, 2); - device_create_file_in(new_client, 3); - device_create_file_in(new_client, 4); - device_create_file_in(new_client, 5); - device_create_file_in(new_client, 6); - - device_create_file_fan(new_client, 1); - device_create_file_fan(new_client, 2); - device_create_file_fan(new_client, 3); - - device_create_file_temp(new_client, 1); - device_create_file_temp(new_client, 2); - device_create_file_temp(new_client, 3); - device_create_file_temp(new_client, 4); - - device_create_file_vid(new_client); - device_create_file_vrm(new_client); - - device_create_file_alarms(new_client); - - device_create_file_pwm1(new_client); - return 0; +ERROR4: + sysfs_remove_group(&new_client->dev.kobj, &asb100_group); ERROR3: i2c_detach_client(data->lm75[1]); i2c_detach_client(data->lm75[0]); @@ -861,8 +873,10 @@ static int asb100_detach_client(struct i2c_client *client) int err; /* main client */ - if (data) + if (data) { hwmon_device_unregister(data->class_dev); + sysfs_remove_group(&client->dev.kobj, &asb100_group); + } if ((err = i2c_detach_client(client))) return err; diff --git a/drivers/hwmon/atxp1.c b/drivers/hwmon/atxp1.c index 728a1e8b919..0ccdd0750c4 100644 --- a/drivers/hwmon/atxp1.c +++ b/drivers/hwmon/atxp1.c @@ -27,6 +27,7 @@ #include <linux/hwmon-vid.h> #include <linux/err.h> #include <linux/mutex.h> +#include <linux/sysfs.h> MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("System voltages control via Attansic ATXP1"); @@ -116,8 +117,7 @@ static ssize_t atxp1_storevcore(struct device *dev, struct device_attribute *att { struct atxp1_data *data; struct i2c_client *client; - char vid; - char cvid; + int vid, cvid; unsigned int vcore; client = to_i2c_client(dev); @@ -251,6 +251,17 @@ static ssize_t atxp1_storegpio2(struct device *dev, struct device_attribute *att */ static DEVICE_ATTR(gpio2, S_IRUGO | S_IWUSR, atxp1_showgpio2, atxp1_storegpio2); +static struct attribute *atxp1_attributes[] = { + &dev_attr_gpio1.attr, + &dev_attr_gpio2.attr, + &dev_attr_cpu0_vid.attr, + NULL +}; + +static const struct attribute_group atxp1_group = { + .attrs = atxp1_attributes, +}; + static int atxp1_attach_adapter(struct i2c_adapter *adapter) { @@ -320,21 +331,23 @@ static int atxp1_detect(struct i2c_adapter *adapter, int address, int kind) goto exit_free; } + /* Register sysfs hooks */ + if ((err = sysfs_create_group(&new_client->dev.kobj, &atxp1_group))) + goto exit_detach; + data->class_dev = hwmon_device_register(&new_client->dev); if (IS_ERR(data->class_dev)) { err = PTR_ERR(data->class_dev); - goto exit_detach; + goto exit_remove_files; } - device_create_file(&new_client->dev, &dev_attr_gpio1); - device_create_file(&new_client->dev, &dev_attr_gpio2); - device_create_file(&new_client->dev, &dev_attr_cpu0_vid); - dev_info(&new_client->dev, "Using VRM: %d.%d\n", data->vrm / 10, data->vrm % 10); return 0; +exit_remove_files: + sysfs_remove_group(&new_client->dev.kobj, &atxp1_group); exit_detach: i2c_detach_client(new_client); exit_free: @@ -349,6 +362,7 @@ static int atxp1_detach_client(struct i2c_client * client) int err; hwmon_device_unregister(data->class_dev); + sysfs_remove_group(&client->dev.kobj, &atxp1_group); err = i2c_detach_client(client); diff --git a/drivers/hwmon/ds1621.c b/drivers/hwmon/ds1621.c index 478eb4bb857..c849c0c6ee9 100644 --- a/drivers/hwmon/ds1621.c +++ b/drivers/hwmon/ds1621.c @@ -29,6 +29,7 @@ #include <linux/hwmon.h> #include <linux/err.h> #include <linux/mutex.h> +#include <linux/sysfs.h> #include "lm75.h" /* Addresses to scan */ @@ -178,6 +179,18 @@ static DEVICE_ATTR(temp1_input, S_IRUGO , show_temp, NULL); static DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO , show_temp_min, set_temp_min); static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_max, set_temp_max); +static struct attribute *ds1621_attributes[] = { + &dev_attr_temp1_input.attr, + &dev_attr_temp1_min.attr, + &dev_attr_temp1_max.attr, + &dev_attr_alarms.attr, + NULL +}; + +static const struct attribute_group ds1621_group = { + .attrs = ds1621_attributes, +}; + static int ds1621_attach_adapter(struct i2c_adapter *adapter) { @@ -253,21 +266,19 @@ static int ds1621_detect(struct i2c_adapter *adapter, int address, ds1621_init_client(new_client); /* Register sysfs hooks */ + if ((err = sysfs_create_group(&new_client->dev.kobj, &ds1621_group))) + goto exit_detach; + data->class_dev = hwmon_device_register(&new_client->dev); if (IS_ERR(data->class_dev)) { err = PTR_ERR(data->class_dev); - goto exit_detach; + goto exit_remove_files; } - device_create_file(&new_client->dev, &dev_attr_alarms); - device_create_file(&new_client->dev, &dev_attr_temp1_input); - device_create_file(&new_client->dev, &dev_attr_temp1_min); - device_create_file(&new_client->dev, &dev_attr_temp1_max); - return 0; -/* OK, this is not exactly good programming practice, usually. But it is - very code-efficient in this case. */ + exit_remove_files: + sysfs_remove_group(&new_client->dev.kobj, &ds1621_group); exit_detach: i2c_detach_client(new_client); exit_free: @@ -282,6 +293,7 @@ static int ds1621_detach_client(struct i2c_client *client) int err; hwmon_device_unregister(data->class_dev); + sysfs_remove_group(&client->dev.kobj, &ds1621_group); if ((err = i2c_detach_client(client))) return err; diff --git a/drivers/hwmon/f71805f.c b/drivers/hwmon/f71805f.c index fd72440faf7..de17a72149d 100644 --- a/drivers/hwmon/f71805f.c +++ b/drivers/hwmon/f71805f.c @@ -1,7 +1,7 @@ /* * f71805f.c - driver for the Fintek F71805F/FG Super-I/O chip integrated * hardware monitoring features - * Copyright (C) 2005 Jean Delvare <khali@linux-fr.org> + * Copyright (C) 2005-2006 Jean Delvare <khali@linux-fr.org> * * The F71805F/FG is a LPC Super-I/O chip made by Fintek. It integrates * complete hardware monitoring features: voltage, fan and temperature @@ -31,6 +31,7 @@ #include <linux/hwmon-sysfs.h> #include <linux/err.h> #include <linux/mutex.h> +#include <linux/sysfs.h> #include <asm/io.h> static struct platform_device *pdev; @@ -147,7 +148,7 @@ struct f71805f_data { u8 temp_high[3]; u8 temp_hyst[3]; u8 temp_mode; - u8 alarms[3]; + unsigned long alarms; }; static inline long in_from_reg(u8 reg) @@ -311,10 +312,9 @@ static struct f71805f_data *f71805f_update_device(struct device *dev) data->temp[nr] = f71805f_read8(data, F71805F_REG_TEMP(nr)); } - for (nr = 0; nr < 3; nr++) { - data->alarms[nr] = f71805f_read8(data, - F71805F_REG_STATUS(nr)); - } + data->alarms = f71805f_read8(data, F71805F_REG_STATUS(0)) + + (f71805f_read8(data, F71805F_REG_STATUS(1)) << 8) + + (f71805f_read8(data, F71805F_REG_STATUS(2)) << 16); data->last_updated = jiffies; data->valid = 1; @@ -557,8 +557,7 @@ static ssize_t show_alarms_in(struct device *dev, struct device_attribute { struct f71805f_data *data = f71805f_update_device(dev); - return sprintf(buf, "%d\n", data->alarms[0] | - ((data->alarms[1] & 0x01) << 8)); + return sprintf(buf, "%lu\n", data->alarms & 0x1ff); } static ssize_t show_alarms_fan(struct device *dev, struct device_attribute @@ -566,7 +565,7 @@ static ssize_t show_alarms_fan(struct device *dev, struct device_attribute { struct f71805f_data *data = f71805f_update_device(dev); - return sprintf(buf, "%d\n", data->alarms[2] & 0x07); + return sprintf(buf, "%lu\n", (data->alarms >> 16) & 0x07); } static ssize_t show_alarms_temp(struct device *dev, struct device_attribute @@ -574,7 +573,17 @@ static ssize_t show_alarms_temp(struct device *dev, struct device_attribute { struct f71805f_data *data = f71805f_update_device(dev); - return sprintf(buf, "%d\n", (data->alarms[1] >> 3) & 0x07); + return sprintf(buf, "%lu\n", (data->alarms >> 11) & 0x07); +} + +static ssize_t show_alarm(struct device *dev, struct device_attribute + *devattr, char *buf) +{ + struct f71805f_data *data = f71805f_update_device(dev); + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + int bitnr = attr->index; + + return sprintf(buf, "%lu\n", (data->alarms >> bitnr) & 1); } static ssize_t show_name(struct device *dev, struct device_attribute @@ -585,88 +594,189 @@ static ssize_t show_name(struct device *dev, struct device_attribute return sprintf(buf, "%s\n", data->name); } -static struct device_attribute f71805f_dev_attr[] = { - __ATTR(in0_input, S_IRUGO, show_in0, NULL), - __ATTR(in0_max, S_IRUGO| S_IWUSR, show_in0_max, set_in0_max), - __ATTR(in0_min, S_IRUGO| S_IWUSR, show_in0_min, set_in0_min), - __ATTR(alarms_in, S_IRUGO, show_alarms_in, NULL), - __ATTR(alarms_fan, S_IRUGO, show_alarms_fan, NULL), - __ATTR(alarms_temp, S_IRUGO, show_alarms_temp, NULL), - __ATTR(name, S_IRUGO, show_name, NULL), +static DEVICE_ATTR(in0_input, S_IRUGO, show_in0, NULL); +static DEVICE_ATTR(in0_max, S_IRUGO| S_IWUSR, show_in0_max, set_in0_max); +static DEVICE_ATTR(in0_min, S_IRUGO| S_IWUSR, show_in0_min, set_in0_min); +static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, show_in, NULL, 1); +static SENSOR_DEVICE_ATTR(in1_max, S_IRUGO | S_IWUSR, + show_in_max, set_in_max, 1); +static SENSOR_DEVICE_ATTR(in1_min, S_IRUGO | S_IWUSR, + show_in_min, set_in_min, 1); +static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, show_in, NULL, 2); +static SENSOR_DEVICE_ATTR(in2_max, S_IRUGO | S_IWUSR, + show_in_max, set_in_max, 2); +static SENSOR_DEVICE_ATTR(in2_min, S_IRUGO | S_IWUSR, + show_in_min, set_in_min, 2); +static SENSOR_DEVICE_ATTR(in3_input, S_IRUGO, show_in, NULL, 3); +static SENSOR_DEVICE_ATTR(in3_max, S_IRUGO | S_IWUSR, + show_in_max, set_in_max, 3); +static SENSOR_DEVICE_ATTR(in3_min, S_IRUGO | S_IWUSR, + show_in_min, set_in_min, 3); +static SENSOR_DEVICE_ATTR(in4_input, S_IRUGO, show_in, NULL, 4); +static SENSOR_DEVICE_ATTR(in4_max, S_IRUGO | S_IWUSR, + show_in_max, set_in_max, 4); +static SENSOR_DEVICE_ATTR(in4_min, S_IRUGO | S_IWUSR, + show_in_min, set_in_min, 4); +static SENSOR_DEVICE_ATTR(in5_input, S_IRUGO, show_in, NULL, 5); +static SENSOR_DEVICE_ATTR(in5_max, S_IRUGO | S_IWUSR, + show_in_max, set_in_max, 5); +static SENSOR_DEVICE_ATTR(in5_min, S_IRUGO | S_IWUSR, + show_in_min, set_in_min, 5); +static SENSOR_DEVICE_ATTR(in6_input, S_IRUGO, show_in, NULL, 6); +static SENSOR_DEVICE_ATTR(in6_max, S_IRUGO | S_IWUSR, + show_in_max, set_in_max, 6); +static SENSOR_DEVICE_ATTR(in6_min, S_IRUGO | S_IWUSR, + show_in_min, set_in_min, 6); +static SENSOR_DEVICE_ATTR(in7_input, S_IRUGO, show_in, NULL, 7); +static SENSOR_DEVICE_ATTR(in7_max, S_IRUGO | S_IWUSR, + show_in_max, set_in_max, 7); +static SENSOR_DEVICE_ATTR(in7_min, S_IRUGO | S_IWUSR, + show_in_min, set_in_min, 7); +static SENSOR_DEVICE_ATTR(in8_input, S_IRUGO, show_in, NULL, 8); +static SENSOR_DEVICE_ATTR(in8_max, S_IRUGO | S_IWUSR, + show_in_max, set_in_max, 8); +static SENSOR_DEVICE_ATTR(in8_min, S_IRUGO | S_IWUSR, + show_in_min, set_in_min, 8); + +static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0); +static SENSOR_DEVICE_ATTR(fan1_min, S_IRUGO | S_IWUSR, + show_fan_min, set_fan_min, 0); +static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1); +static SENSOR_DEVICE_ATTR(fan2_min, S_IRUGO | S_IWUSR, + show_fan_min, set_fan_min, 1); +static SENSOR_DEVICE_ATTR(fan3_input, S_IRUGO, show_fan, NULL, 2); +static SENSOR_DEVICE_ATTR(fan3_min, S_IRUGO | S_IWUSR, + show_fan_min, set_fan_min, 2); + +static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0); +static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO | S_IWUSR, + show_temp_max, set_temp_max, 0); +static SENSOR_DEVICE_ATTR(temp1_max_hyst, S_IRUGO | S_IWUSR, + show_temp_hyst, set_temp_hyst, 0); +static SENSOR_DEVICE_ATTR(temp1_type, S_IRUGO, show_temp_type, NULL, 0); +static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 1); +static SENSOR_DEVICE_ATTR(temp2_max, S_IRUGO | S_IWUSR, + show_temp_max, set_temp_max, 1); +static SENSOR_DEVICE_ATTR(temp2_max_hyst, S_IRUGO | S_IWUSR, + show_temp_hyst, set_temp_hyst, 1); +static SENSOR_DEVICE_ATTR(temp2_type, S_IRUGO, show_temp_type, NULL, 1); +static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_temp, NULL, 2); +static SENSOR_DEVICE_ATTR(temp3_max, S_IRUGO | S_IWUSR, + show_temp_max, set_temp_max, 2); +static SENSOR_DEVICE_ATTR(temp3_max_hyst, S_IRUGO | S_IWUSR, + show_temp_hyst, set_temp_hyst, 2); +static SENSOR_DEVICE_ATTR(temp3_type, S_IRUGO, show_temp_type, NULL, 2); + +static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 0); +static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 1); +static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 2); +static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, 3); +static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL, 4); +static SENSOR_DEVICE_ATTR(in5_alarm, S_IRUGO, show_alarm, NULL, 5); +static SENSOR_DEVICE_ATTR(in6_alarm, S_IRUGO, show_alarm, NULL, 6); +static SENSOR_DEVICE_ATTR(in7_alarm, S_IRUGO, show_alarm, NULL, 7); +static SENSOR_DEVICE_ATTR(in8_alarm, S_IRUGO, show_alarm, NULL, 8); +static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 11); +static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 12); +static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, 13); +static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, 16); +static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, 17); +static SENSOR_DEVICE_ATTR(fan3_alarm, S_IRUGO, show_alarm, NULL, 18); +static DEVICE_ATTR(alarms_in, S_IRUGO, show_alarms_in, NULL); +static DEVICE_ATTR(alarms_fan, S_IRUGO, show_alarms_fan, NULL); +static DEVICE_ATTR(alarms_temp, S_IRUGO, show_alarms_temp, NULL); + +static DEVICE_ATTR(name, S_IRUGO, show_name, NULL); + +static struct attribute *f71805f_attributes[] = { + &dev_attr_in0_input.attr, + &dev_attr_in0_max.attr, + &dev_attr_in0_min.attr, + &sensor_dev_attr_in1_input.dev_attr.attr, + &sensor_dev_attr_in1_max.dev_attr.attr, + &sensor_dev_attr_in1_min.dev_attr.attr, + &sensor_dev_attr_in2_input.dev_attr.attr, + &sensor_dev_attr_in2_max.dev_attr.attr, + &sensor_dev_attr_in2_min.dev_attr.attr, + &sensor_dev_attr_in3_input.dev_attr.attr, + &sensor_dev_attr_in3_max.dev_attr.attr, + &sensor_dev_attr_in3_min.dev_attr.attr, + &sensor_dev_attr_in4_input.dev_attr.attr, + &sensor_dev_attr_in4_max.dev_attr.attr, + &sensor_dev_attr_in4_min.dev_attr.attr, + &sensor_dev_attr_in5_input.dev_attr.attr, + &sensor_dev_attr_in5_max.dev_attr.attr, + &sensor_dev_attr_in5_min.dev_attr.attr, + &sensor_dev_attr_in6_input.dev_attr.attr, + &sensor_dev_attr_in6_max.dev_attr.attr, + &sensor_dev_attr_in6_min.dev_attr.attr, + &sensor_dev_attr_in7_input.dev_attr.attr, + &sensor_dev_attr_in7_max.dev_attr.attr, + &sensor_dev_attr_in7_min.dev_attr.attr, + &sensor_dev_attr_in8_input.dev_attr.attr, + &sensor_dev_attr_in8_max.dev_attr.attr, + &sensor_dev_attr_in8_min.dev_attr.attr, + + &sensor_dev_attr_temp1_input.dev_attr.attr, + &sensor_dev_attr_temp1_max.dev_attr.attr, + &sensor_dev_attr_temp1_max_hyst.dev_attr.attr, + &sensor_dev_attr_temp1_type.dev_attr.attr, + &sensor_dev_attr_temp2_input.dev_attr.attr, + &sensor_dev_attr_temp2_max.dev_attr.attr, + &sensor_dev_attr_temp2_max_hyst.dev_attr.attr, + &sensor_dev_attr_temp2_type.dev_attr.attr, + &sensor_dev_attr_temp3_input.dev_attr.attr, + &sensor_dev_attr_temp3_max.dev_attr.attr, + &sensor_dev_attr_temp3_max_hyst.dev_attr.attr, + &sensor_dev_attr_temp3_type.dev_attr.attr, + + &sensor_dev_attr_in0_alarm.dev_attr.attr, + &sensor_dev_attr_in1_alarm.dev_attr.attr, + &sensor_dev_attr_in2_alarm.dev_attr.attr, + &sensor_dev_attr_in3_alarm.dev_attr.attr, + &sensor_dev_attr_in4_alarm.dev_attr.attr, + &sensor_dev_attr_in5_alarm.dev_attr.attr, + &sensor_dev_attr_in6_alarm.dev_attr.attr, + &sensor_dev_attr_in7_alarm.dev_attr.attr, + &sensor_dev_attr_in8_alarm.dev_attr.attr, + &dev_attr_alarms_in.attr, + &sensor_dev_attr_temp1_alarm.dev_attr.attr, + &sensor_dev_attr_temp2_alarm.dev_attr.attr, + &sensor_dev_attr_temp3_alarm.dev_attr.attr, + &dev_attr_alarms_temp.attr, + &dev_attr_alarms_fan.attr, + + &dev_attr_name.attr, + NULL }; -static struct sensor_device_attribute f71805f_sensor_attr[] = { - SENSOR_ATTR(in1_input, S_IRUGO, show_in, NULL, 1), - SENSOR_ATTR(in1_max, S_IRUGO | S_IWUSR, - show_in_max, set_in_max, 1), - SENSOR_ATTR(in1_min, S_IRUGO | S_IWUSR, - show_in_min, set_in_min, 1), - SENSOR_ATTR(in2_input, S_IRUGO, show_in, NULL, 2), - SENSOR_ATTR(in2_max, S_IRUGO | S_IWUSR, - show_in_max, set_in_max, 2), - SENSOR_ATTR(in2_min, S_IRUGO | S_IWUSR, - show_in_min, set_in_min, 2), - SENSOR_ATTR(in3_input, S_IRUGO, show_in, NULL, 3), - SENSOR_ATTR(in3_max, S_IRUGO | S_IWUSR, - show_in_max, set_in_max, 3), - SENSOR_ATTR(in3_min, S_IRUGO | S_IWUSR, - show_in_min, set_in_min, 3), - SENSOR_ATTR(in4_input, S_IRUGO, show_in, NULL, 4), - SENSOR_ATTR(in4_max, S_IRUGO | S_IWUSR, - show_in_max, set_in_max, 4), - SENSOR_ATTR(in4_min, S_IRUGO | S_IWUSR, - show_in_min, set_in_min, 4), - SENSOR_ATTR(in5_input, S_IRUGO, show_in, NULL, 5), - SENSOR_ATTR(in5_max, S_IRUGO | S_IWUSR, - show_in_max, set_in_max, 5), - SENSOR_ATTR(in5_min, S_IRUGO | S_IWUSR, - show_in_min, set_in_min, 5), - SENSOR_ATTR(in6_input, S_IRUGO, show_in, NULL, 6), - SENSOR_ATTR(in6_max, S_IRUGO | S_IWUSR, - show_in_max, set_in_max, 6), - SENSOR_ATTR(in6_min, S_IRUGO | S_IWUSR, - show_in_min, set_in_min, 6), - SENSOR_ATTR(in7_input, S_IRUGO, show_in, NULL, 7), - SENSOR_ATTR(in7_max, S_IRUGO | S_IWUSR, - show_in_max, set_in_max, 7), - SENSOR_ATTR(in7_min, S_IRUGO | S_IWUSR, - show_in_min, set_in_min, 7), - SENSOR_ATTR(in8_input, S_IRUGO, show_in, NULL, 8), - SENSOR_ATTR(in8_max, S_IRUGO | S_IWUSR, - show_in_max, set_in_max, 8), - SENSOR_ATTR(in8_min, S_IRUGO | S_IWUSR, - show_in_min, set_in_min, 8), - - SENSOR_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0), - SENSOR_ATTR(temp1_max, S_IRUGO | S_IWUSR, - show_temp_max, set_temp_max, 0), - SENSOR_ATTR(temp1_max_hyst, S_IRUGO | S_IWUSR, - show_temp_hyst, set_temp_hyst, 0), - SENSOR_ATTR(temp1_type, S_IRUGO, show_temp_type, NULL, 0), - SENSOR_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 1), - SENSOR_ATTR(temp2_max, S_IRUGO | S_IWUSR, - show_temp_max, set_temp_max, 1), - SENSOR_ATTR(temp2_max_hyst, S_IRUGO | S_IWUSR, - show_temp_hyst, set_temp_hyst, 1), - SENSOR_ATTR(temp2_type, S_IRUGO, show_temp_type, NULL, 1), - SENSOR_ATTR(temp3_input, S_IRUGO, show_temp, NULL, 2), - SENSOR_ATTR(temp3_max, S_IRUGO | S_IWUSR, - show_temp_max, set_temp_max, 2), - SENSOR_ATTR(temp3_max_hyst, S_IRUGO | S_IWUSR, - show_temp_hyst, set_temp_hyst, 2), - SENSOR_ATTR(temp3_type, S_IRUGO, show_temp_type, NULL, 2), +static const struct attribute_group f71805f_group = { + .attrs = f71805f_attributes, }; -static struct sensor_device_attribute f71805f_fan_attr[] = { - SENSOR_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0), - SENSOR_ATTR(fan1_min, S_IRUGO | S_IWUSR, - show_fan_min, set_fan_min, 0), - SENSOR_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1), - SENSOR_ATTR(fan2_min, S_IRUGO | S_IWUSR, - show_fan_min, set_fan_min, 1), - SENSOR_ATTR(fan3_input, S_IRUGO, show_fan, NULL, 2), - SENSOR_ATTR(fan3_min, S_IRUGO | S_IWUSR, - show_fan_min, set_fan_min, 2), +static struct attribute *f71805f_attributes_fan[3][4] = { + { + &sensor_dev_attr_fan1_input.dev_attr.attr, + &sensor_dev_attr_fan1_min.dev_attr.attr, + &sensor_dev_attr_fan1_alarm.dev_attr.attr, + NULL + }, { + &sensor_dev_attr_fan2_input.dev_attr.attr, + &sensor_dev_attr_fan2_min.dev_attr.attr, + &sensor_dev_attr_fan2_alarm.dev_attr.attr, + NULL + }, { + &sensor_dev_attr_fan3_input.dev_attr.attr, + &sensor_dev_attr_fan3_min.dev_attr.attr, + &sensor_dev_attr_fan3_alarm.dev_attr.attr, + NULL + } +}; + +static const struct attribute_group f71805f_group_fan[3] = { + { .attrs = f71805f_attributes_fan[0] }, + { .attrs = f71805f_attributes_fan[1] }, + { .attrs = f71805f_attributes_fan[2] }, }; /* @@ -714,43 +824,35 @@ static int __devinit f71805f_probe(struct platform_device *pdev) platform_set_drvdata(pdev, data); - data->class_dev = hwmon_device_register(&pdev->dev); - if (IS_ERR(data->class_dev)) { - err = PTR_ERR(data->class_dev); - dev_err(&pdev->dev, "Class registration failed (%d)\n", err); - goto exit_free; - } - /* Initialize the F71805F chip */ f71805f_init_device(data); /* Register sysfs interface files */ - for (i = 0; i < ARRAY_SIZE(f71805f_dev_attr); i++) { - err = device_create_file(&pdev->dev, &f71805f_dev_attr[i]); - if (err) - goto exit_class; - } - for (i = 0; i < ARRAY_SIZE(f71805f_sensor_attr); i++) { - err = device_create_file(&pdev->dev, - &f71805f_sensor_attr[i].dev_attr); - if (err) - goto exit_class; - } - for (i = 0; i < ARRAY_SIZE(f71805f_fan_attr); i++) { - if (!(data->fan_enabled & (1 << (i / 2)))) + if ((err = sysfs_create_group(&pdev->dev.kobj, &f71805f_group))) + goto exit_free; + for (i = 0; i < 3; i++) { + if (!(data->fan_enabled & (1 << i))) continue; - err = device_create_file(&pdev->dev, - &f71805f_fan_attr[i].dev_attr); - if (err) - goto exit_class; + if ((err = sysfs_create_group(&pdev->dev.kobj, + &f71805f_group_fan[i]))) + goto exit_remove_files; + } + + data->class_dev = hwmon_device_register(&pdev->dev); + if (IS_ERR(data->class_dev)) { + err = PTR_ERR(data->class_dev); + dev_err(&pdev->dev, "Class registration failed (%d)\n", err); + goto exit_remove_files; } return 0; -exit_class: - dev_err(&pdev->dev, "Sysfs interface creation failed\n"); - hwmon_device_unregister(data->class_dev); +exit_remove_files: + sysfs_remove_group(&pdev->dev.kobj, &f71805f_group); + for (i = 0; i < 3; i++) + sysfs_remove_group(&pdev->dev.kobj, &f71805f_group_fan[i]); exit_free: + platform_set_drvdata(pdev, NULL); kfree(data); exit: return err; @@ -759,9 +861,13 @@ exit: static int __devexit f71805f_remove(struct platform_device *pdev) { struct f71805f_data *data = platform_get_drvdata(pdev); + int i; platform_set_drvdata(pdev, NULL); hwmon_device_unregister(data->class_dev); + sysfs_remove_group(&pdev->dev.kobj, &f71805f_group); + for (i = 0; i < 3; i++) + sysfs_remove_group(&pdev->dev.kobj, &f71805f_group_fan[i]); kfree(data); return 0; diff --git a/drivers/hwmon/fscher.c b/drivers/hwmon/fscher.c index 6bc76b40763..19717752cfc 100644 --- a/drivers/hwmon/fscher.c +++ b/drivers/hwmon/fscher.c @@ -34,6 +34,7 @@ #include <linux/hwmon.h> #include <linux/err.h> #include <linux/mutex.h> +#include <linux/sysfs.h> /* * Addresses to scan @@ -240,47 +241,45 @@ sysfs_alarms(FSCHER_REG_EVENTS) sysfs_control(FSCHER_REG_CONTROL) sysfs_watchdog(FSCHER_REG_WDOG_CONTROL, FSCHER_REG_WDOG_STATE, FSCHER_REG_WDOG_PRESET) -#define device_create_file_fan(client, offset) \ -do { \ - device_create_file(&client->dev, &dev_attr_fan##offset##_status); \ - device_create_file(&client->dev, &dev_attr_pwm##offset); \ - device_create_file(&client->dev, &dev_attr_fan##offset##_div); \ - device_create_file(&client->dev, &dev_attr_fan##offset##_input); \ -} while (0) - -#define device_create_file_temp(client, offset) \ -do { \ - device_create_file(&client->dev, &dev_attr_temp##offset##_status); \ - device_create_file(&client->dev, &dev_attr_temp##offset##_input); \ -} while (0) - -#define device_create_file_in(client, offset) \ -do { \ - device_create_file(&client->dev, &dev_attr_in##offset##_input); \ -} while (0) - -#define device_create_file_revision(client) \ -do { \ - device_create_file(&client->dev, &dev_attr_revision); \ -} while (0) - -#define device_create_file_alarms(client) \ -do { \ - device_create_file(&client->dev, &dev_attr_alarms); \ -} while (0) - -#define device_create_file_control(client) \ -do { \ - device_create_file(&client->dev, &dev_attr_control); \ -} while (0) - -#define device_create_file_watchdog(client) \ -do { \ - device_create_file(&client->dev, &dev_attr_watchdog_status); \ - device_create_file(&client->dev, &dev_attr_watchdog_control); \ - device_create_file(&client->dev, &dev_attr_watchdog_preset); \ -} while (0) - +static struct attribute *fscher_attributes[] = { + &dev_attr_revision.attr, + &dev_attr_alarms.attr, + &dev_attr_control.attr, + + &dev_attr_watchdog_status.attr, + &dev_attr_watchdog_control.attr, + &dev_attr_watchdog_preset.attr, + + &dev_attr_in0_input.attr, + &dev_attr_in1_input.attr, + &dev_attr_in2_input.attr, + + &dev_attr_fan1_status.attr, + &dev_attr_fan1_div.attr, + &dev_attr_fan1_input.attr, + &dev_attr_pwm1.attr, + &dev_attr_fan2_status.attr, + &dev_attr_fan2_div.attr, + &dev_attr_fan2_input.attr, + &dev_attr_pwm2.attr, + &dev_attr_fan3_status.attr, + &dev_attr_fan3_div.attr, + &dev_attr_fan3_input.attr, + &dev_attr_pwm3.attr, + + &dev_attr_temp1_status.attr, + &dev_attr_temp1_input.attr, + &dev_attr_temp2_status.attr, + &dev_attr_temp2_input.attr, + &dev_attr_temp3_status.attr, + &dev_attr_temp3_input.attr, + NULL +}; + +static const struct attribute_group fscher_group = { + .attrs = fscher_attributes, +}; + /* * Real code */ @@ -342,31 +341,19 @@ static int fscher_detect(struct i2c_adapter *adapter, int address, int kind) fscher_init_client(new_client); /* Register sysfs hooks */ + if ((err = sysfs_create_group(&new_client->dev.kobj, &fscher_group))) + goto exit_detach; + data->class_dev = hwmon_device_register(&new_client->dev); if (IS_ERR(data->class_dev)) { err = PTR_ERR(data->class_dev); - goto exit_detach; + goto exit_remove_files; } - device_create_file_revision(new_client); - device_create_file_alarms(new_client); - device_create_file_control(new_client); - device_create_file_watchdog(new_client); - - device_create_file_in(new_client, 0); - device_create_file_in(new_client, 1); - device_create_file_in(new_client, 2); - - device_create_file_fan(new_client, 1); - device_create_file_fan(new_client, 2); - device_create_file_fan(new_client, 3); - - device_create_file_temp(new_client, 1); - device_create_file_temp(new_client, 2); - device_create_file_temp(new_client, 3); - return 0; +exit_remove_files: + sysfs_remove_group(&new_client->dev.kobj, &fscher_group); exit_detach: i2c_detach_client(new_client); exit_free: @@ -381,6 +368,7 @@ static int fscher_detach_client(struct i2c_client *client) int err; hwmon_device_unregister(data->class_dev); + sysfs_remove_group(&client->dev.kobj, &fscher_group); if ((err = i2c_detach_client(client))) return err; diff --git a/drivers/hwmon/fscpos.c b/drivers/hwmon/fscpos.c index 6dc4846b9ee..ea506a77f9c 100644 --- a/drivers/hwmon/fscpos.c +++ b/drivers/hwmon/fscpos.c @@ -38,6 +38,7 @@ #include <linux/hwmon.h> #include <linux/err.h> #include <linux/mutex.h> +#include <linux/sysfs.h> /* * Addresses to scan @@ -432,6 +433,44 @@ static DEVICE_ATTR(in0_input, S_IRUGO, show_volt_12, NULL); static DEVICE_ATTR(in1_input, S_IRUGO, show_volt_5, NULL); static DEVICE_ATTR(in2_input, S_IRUGO, show_volt_batt, NULL); +static struct attribute *fscpos_attributes[] = { + &dev_attr_event.attr, + &dev_attr_in0_input.attr, + &dev_attr_in1_input.attr, + &dev_attr_in2_input.attr, + + &dev_attr_wdog_control.attr, + &dev_attr_wdog_preset.attr, + &dev_attr_wdog_state.attr, + + &dev_attr_temp1_input.attr, + &dev_attr_temp1_status.attr, + &dev_attr_temp1_reset.attr, + &dev_attr_temp2_input.attr, + &dev_attr_temp2_status.attr, + &dev_attr_temp2_reset.attr, + &dev_attr_temp3_input.attr, + &dev_attr_temp3_status.attr, + &dev_attr_temp3_reset.attr, + + &dev_attr_fan1_input.attr, + &dev_attr_fan1_status.attr, + &dev_attr_fan1_ripple.attr, + &dev_attr_pwm1.attr, + &dev_attr_fan2_input.attr, + &dev_attr_fan2_status.attr, + &dev_attr_fan2_ripple.attr, + &dev_attr_pwm2.attr, + &dev_attr_fan3_input.attr, + &dev_attr_fan3_status.attr, + &dev_attr_fan3_ripple.attr, + NULL +}; + +static const struct attribute_group fscpos_group = { + .attrs = fscpos_attributes, +}; + static int fscpos_attach_adapter(struct i2c_adapter *adapter) { if (!(adapter->class & I2C_CLASS_HWMON)) @@ -497,42 +536,19 @@ static int fscpos_detect(struct i2c_adapter *adapter, int address, int kind) dev_info(&new_client->dev, "Found fscpos chip, rev %u\n", data->revision); /* Register sysfs hooks */ + if ((err = sysfs_create_group(&new_client->dev.kobj, &fscpos_group))) + goto exit_detach; + data->class_dev = hwmon_device_register(&new_client->dev); if (IS_ERR(data->class_dev)) { err = PTR_ERR(data->class_dev); - goto exit_detach; + goto exit_remove_files; } - device_create_file(&new_client->dev, &dev_attr_event); - device_create_file(&new_client->dev, &dev_attr_in0_input); - device_create_file(&new_client->dev, &dev_attr_in1_input); - device_create_file(&new_client->dev, &dev_attr_in2_input); - device_create_file(&new_client->dev, &dev_attr_wdog_control); - device_create_file(&new_client->dev, &dev_attr_wdog_preset); - device_create_file(&new_client->dev, &dev_attr_wdog_state); - device_create_file(&new_client->dev, &dev_attr_temp1_input); - device_create_file(&new_client->dev, &dev_attr_temp1_status); - device_create_file(&new_client->dev, &dev_attr_temp1_reset); - device_create_file(&new_client->dev, &dev_attr_temp2_input); - device_create_file(&new_client->dev, &dev_attr_temp2_status); - device_create_file(&new_client->dev, &dev_attr_temp2_reset); - device_create_file(&new_client->dev, &dev_attr_temp3_input); - device_create_file(&new_client->dev, &dev_attr_temp3_status); - device_create_file(&new_client->dev, &dev_attr_temp3_reset); - device_create_file(&new_client->dev, &dev_attr_fan1_input); - device_create_file(&new_client->dev, &dev_attr_fan1_status); - device_create_file(&new_client->dev, &dev_attr_fan1_ripple); - device_create_file(&new_client->dev, &dev_attr_pwm1); - device_create_file(&new_client->dev, &dev_attr_fan2_input); - device_create_file(&new_client->dev, &dev_attr_fan2_status); - device_create_file(&new_client->dev, &dev_attr_fan2_ripple); - device_create_file(&new_client->dev, &dev_attr_pwm2); - device_create_file(&new_client->dev, &dev_attr_fan3_input); - device_create_file(&new_client->dev, &dev_attr_fan3_status); - device_create_file(&new_client->dev, &dev_attr_fan3_ripple); - return 0; +exit_remove_files: + sysfs_remove_group(&new_client->dev.kobj, &fscpos_group); exit_detach: i2c_detach_client(new_client); exit_free: @@ -547,6 +563,7 @@ static int fscpos_detach_client(struct i2c_client *client) int err; hwmon_device_unregister(data->class_dev); + sysfs_remove_group(&client->dev.kobj, &fscpos_group); if ((err = i2c_detach_client(client))) return err; diff --git a/drivers/hwmon/gl518sm.c b/drivers/hwmon/gl518sm.c index 6606aabdb49..c103640455a 100644 --- a/drivers/hwmon/gl518sm.c +++ b/drivers/hwmon/gl518sm.c @@ -44,6 +44,7 @@ #include <linux/hwmon.h> #include <linux/err.h> #include <linux/mutex.h> +#include <linux/sysfs.h> /* Addresses to scan */ static unsigned short normal_i2c[] = { 0x2c, 0x2d, I2C_CLIENT_END }; @@ -340,6 +341,42 @@ static DEVICE_ATTR(beep_enable, S_IWUSR|S_IRUGO, static DEVICE_ATTR(beep_mask, S_IWUSR|S_IRUGO, show_beep_mask, set_beep_mask); +static struct attribute *gl518_attributes[] = { + &dev_attr_in0_input.attr, + &dev_attr_in1_input.attr, + &dev_attr_in2_input.attr, + &dev_attr_in3_input.attr, + &dev_attr_in0_min.attr, + &dev_attr_in1_min.attr, + &dev_attr_in2_min.attr, + &dev_attr_in3_min.attr, + &dev_attr_in0_max.attr, + &dev_attr_in1_max.attr, + &dev_attr_in2_max.attr, + &dev_attr_in3_max.attr, + + &dev_attr_fan1_auto.attr, + &dev_attr_fan1_input.attr, + &dev_attr_fan2_input.attr, + &dev_attr_fan1_min.attr, + &dev_attr_fan2_min.attr, + &dev_attr_fan1_div.attr, + &dev_attr_fan2_div.attr, + + &dev_attr_temp1_input.attr, + &dev_attr_temp1_max.attr, + &dev_attr_temp1_max_hyst.attr, + + &dev_attr_alarms.attr, + &dev_attr_beep_enable.attr, + &dev_attr_beep_mask.attr, + NULL +}; + +static const struct attribute_group gl518_group = { + .attrs = gl518_attributes, +}; + /* * Real code */ @@ -420,43 +457,19 @@ static int gl518_detect(struct i2c_adapter *adapter, int address, int kind) gl518_init_client((struct i2c_client *) new_client); /* Register sysfs hooks */ + if ((err = sysfs_create_group(&new_client->dev.kobj, &gl518_group))) + goto exit_detach; + data->class_dev = hwmon_device_register(&new_client->dev); if (IS_ERR(data->class_dev)) { err = PTR_ERR(data->class_dev); - goto exit_detach; + goto exit_remove_files; } - device_create_file(&new_client->dev, &dev_attr_in0_input); - device_create_file(&new_client->dev, &dev_attr_in1_input); - device_create_file(&new_client->dev, &dev_attr_in2_input); - device_create_file(&new_client->dev, &dev_attr_in3_input); - device_create_file(&new_client->dev, &dev_attr_in0_min); - device_create_file(&new_client->dev, &dev_attr_in1_min); - device_create_file(&new_client->dev, &dev_attr_in2_min); - device_create_file(&new_client->dev, &dev_attr_in3_min); - device_create_file(&new_client->dev, &dev_attr_in0_max); - device_create_file(&new_client->dev, &dev_attr_in1_max); - device_create_file(&new_client->dev, &dev_attr_in2_max); - device_create_file(&new_client->dev, &dev_attr_in3_max); - device_create_file(&new_client->dev, &dev_attr_fan1_auto); - device_create_file(&new_client->dev, &dev_attr_fan1_input); - device_create_file(&new_client->dev, &dev_attr_fan2_input); - device_create_file(&new_client->dev, &dev_attr_fan1_min); - device_create_file(&new_client->dev, &dev_attr_fan2_min); - device_create_file(&new_client->dev, &dev_attr_fan1_div); - device_create_file(&new_client->dev, &dev_attr_fan2_div); - device_create_file(&new_client->dev, &dev_attr_temp1_input); - device_create_file(&new_client->dev, &dev_attr_temp1_max); - device_create_file(&new_client->dev, &dev_attr_temp1_max_hyst); - device_create_file(&new_client->dev, &dev_attr_alarms); - device_create_file(&new_client->dev, &dev_attr_beep_enable); - device_create_file(&new_client->dev, &dev_attr_beep_mask); - return 0; -/* OK, this is not exactly good programming practice, usually. But it is - very code-efficient in this case. */ - +exit_remove_files: + sysfs_remove_group(&new_client->dev.kobj, &gl518_group); exit_detach: i2c_detach_client(new_client); exit_free: @@ -490,6 +503,7 @@ static int gl518_detach_client(struct i2c_client *client) int err; hwmon_device_unregister(data->class_dev); + sysfs_remove_group(&client->dev.kobj, &gl518_group); if ((err = i2c_detach_client(client))) return err; diff --git a/drivers/hwmon/gl520sm.c b/drivers/hwmon/gl520sm.c index 14e810f3c2c..ebe7b9aaa91 100644 --- a/drivers/hwmon/gl520sm.c +++ b/drivers/hwmon/gl520sm.c @@ -30,6 +30,7 @@ #include <linux/hwmon-vid.h> #include <linux/err.h> #include <linux/mutex.h> +#include <linux/sysfs.h> /* Type of the extra sensor */ static unsigned short extra_sensor_type; @@ -190,55 +191,29 @@ static DEVICE_ATTR(type##item, S_IRUGO, get_##type##0##item, NULL); #define sysfs_vid(n) \ sysfs_ro_n(cpu, n, _vid, GL520_REG_VID_INPUT) -#define device_create_file_vid(client, n) \ -device_create_file(&client->dev, &dev_attr_cpu##n##_vid) - #define sysfs_in(n) \ sysfs_ro_n(in, n, _input, GL520_REG_IN##n##INPUT) \ sysfs_rw_n(in, n, _min, GL520_REG_IN##n##_MIN) \ sysfs_rw_n(in, n, _max, GL520_REG_IN##n##_MAX) \ -#define device_create_file_in(client, n) \ -({device_create_file(&client->dev, &dev_attr_in##n##_input); \ -device_create_file(&client->dev, &dev_attr_in##n##_min); \ -device_create_file(&client->dev, &dev_attr_in##n##_max);}) - #define sysfs_fan(n) \ sysfs_ro_n(fan, n, _input, GL520_REG_FAN_INPUT) \ sysfs_rw_n(fan, n, _min, GL520_REG_FAN_MIN) \ sysfs_rw_n(fan, n, _div, GL520_REG_FAN_DIV) -#define device_create_file_fan(client, n) \ -({device_create_file(&client->dev, &dev_attr_fan##n##_input); \ -device_create_file(&client->dev, &dev_attr_fan##n##_min); \ -device_create_file(&client->dev, &dev_attr_fan##n##_div);}) - #define sysfs_fan_off(n) \ sysfs_rw_n(fan, n, _off, GL520_REG_FAN_OFF) \ -#define device_create_file_fan_off(client, n) \ -device_create_file(&client->dev, &dev_attr_fan##n##_off) - #define sysfs_temp(n) \ sysfs_ro_n(temp, n, _input, GL520_REG_TEMP##n##_INPUT) \ sysfs_rw_n(temp, n, _max, GL520_REG_TEMP##n##_MAX) \ sysfs_rw_n(temp, n, _max_hyst, GL520_REG_TEMP##n##_MAX_HYST) -#define device_create_file_temp(client, n) \ -({device_create_file(&client->dev, &dev_attr_temp##n##_input); \ -device_create_file(&client->dev, &dev_attr_temp##n##_max); \ -device_create_file(&client->dev, &dev_attr_temp##n##_max_hyst);}) - #define sysfs_alarms() \ sysfs_ro(alarms, , GL520_REG_ALARMS) \ sysfs_rw(beep_enable, , GL520_REG_BEEP_ENABLE) \ sysfs_rw(beep_mask, , GL520_REG_BEEP_MASK) -#define device_create_file_alarms(client) \ -({device_create_file(&client->dev, &dev_attr_alarms); \ -device_create_file(&client->dev, &dev_attr_beep_enable); \ -device_create_file(&client->dev, &dev_attr_beep_mask);}) - sysfs_vid(0) @@ -511,6 +486,59 @@ static ssize_t set_beep_mask(struct i2c_client *client, struct gl520_data *data, return count; } +static struct attribute *gl520_attributes[] = { + &dev_attr_cpu0_vid.attr, + + &dev_attr_in0_input.attr, + &dev_attr_in0_min.attr, + &dev_attr_in0_max.attr, + &dev_attr_in1_input.attr, + &dev_attr_in1_min.attr, + &dev_attr_in1_max.attr, + &dev_attr_in2_input.attr, + &dev_attr_in2_min.attr, + &dev_attr_in2_max.attr, + &dev_attr_in3_input.attr, + &dev_attr_in3_min.attr, + &dev_attr_in3_max.attr, + + &dev_attr_fan1_input.attr, + &dev_attr_fan1_min.attr, + &dev_attr_fan1_div.attr, + &dev_attr_fan1_off.attr, + &dev_attr_fan2_input.attr, + &dev_attr_fan2_min.attr, + &dev_attr_fan2_div.attr, + + &dev_attr_temp1_input.attr, + &dev_attr_temp1_max.attr, + &dev_attr_temp1_max_hyst.attr, + + &dev_attr_alarms.attr, + &dev_attr_beep_enable.attr, + &dev_attr_beep_mask.attr, + NULL +}; + +static const struct attribute_group gl520_group = { + .attrs = gl520_attributes, +}; + +static struct attribute *gl520_attributes_opt[] = { + &dev_attr_in4_input.attr, + &dev_attr_in4_min.attr, + &dev_attr_in4_max.attr, + + &dev_attr_temp2_input.attr, + &dev_attr_temp2_max.attr, + &dev_attr_temp2_max_hyst.attr, + NULL +}; + +static const struct attribute_group gl520_group_opt = { + .attrs = gl520_attributes_opt, +}; + /* * Real code @@ -572,33 +600,39 @@ static int gl520_detect(struct i2c_adapter *adapter, int address, int kind) gl520_init_client(new_client); /* Register sysfs hooks */ - data->class_dev = hwmon_device_register(&new_client->dev); - if (IS_ERR(data->class_dev)) { - err = PTR_ERR(data->class_dev); + if ((err = sysfs_create_group(&new_client->dev.kobj, &gl520_group))) goto exit_detach; - } - - device_create_file_vid(new_client, 0); - device_create_file_in(new_client, 0); - device_create_file_in(new_client, 1); - device_create_file_in(new_client, 2); - device_create_file_in(new_client, 3); - if (!data->two_temps) - device_create_file_in(new_client, 4); - - device_create_file_fan(new_client, 1); - device_create_file_fan(new_client, 2); - device_create_file_fan_off(new_client, 1); + if (data->two_temps) { + if ((err = device_create_file(&new_client->dev, + &dev_attr_temp2_input)) + || (err = device_create_file(&new_client->dev, + &dev_attr_temp2_max)) + || (err = device_create_file(&new_client->dev, + &dev_attr_temp2_max_hyst))) + goto exit_remove_files; + } else { + if ((err = device_create_file(&new_client->dev, + &dev_attr_in4_input)) + || (err = device_create_file(&new_client->dev, + &dev_attr_in4_min)) + || (err = device_create_file(&new_client->dev, + &dev_attr_in4_max))) + goto exit_remove_files; + } - device_create_file_temp(new_client, 1); - if (data->two_temps) - device_create_file_temp(new_client, 2); - device_create_file_alarms(new_client); + data->class_dev = hwmon_device_register(&new_client->dev); + if (IS_ERR(data->class_dev)) { + err = PTR_ERR(data->class_dev); + goto exit_remove_files; + } return 0; +exit_remove_files: + sysfs_remove_group(&new_client->dev.kobj, &gl520_group); + sysfs_remove_group(&new_client->dev.kobj, &gl520_group_opt); exit_detach: i2c_detach_client(new_client); exit_free: @@ -652,6 +686,8 @@ static int gl520_detach_client(struct i2c_client *client) int err; hwmon_device_unregister(data->class_dev); + sysfs_remove_group(&client->dev.kobj, &gl520_group); + sysfs_remove_group(&client->dev.kobj, &gl520_group_opt); if ((err = i2c_detach_client(client))) return err; diff --git a/drivers/hwmon/hdaps.c b/drivers/hwmon/hdaps.c index 42b632889dd..e8ef62b83d6 100644 --- a/drivers/hwmon/hdaps.c +++ b/drivers/hwmon/hdaps.c @@ -33,6 +33,7 @@ #include <linux/module.h> #include <linux/timer.h> #include <linux/dmi.h> +#include <linux/jiffies.h> #include <asm/io.h> #define HDAPS_LOW_PORT 0x1600 /* first port used by hdaps */ @@ -537,6 +538,7 @@ static int __init hdaps_init(void) HDAPS_DMI_MATCH_NORMAL("ThinkPad T42"), HDAPS_DMI_MATCH_NORMAL("ThinkPad T43"), HDAPS_DMI_MATCH_LENOVO("ThinkPad T60p"), + HDAPS_DMI_MATCH_LENOVO("ThinkPad T60"), HDAPS_DMI_MATCH_NORMAL("ThinkPad X40"), HDAPS_DMI_MATCH_NORMAL("ThinkPad X41"), HDAPS_DMI_MATCH_LENOVO("ThinkPad X60"), @@ -587,7 +589,9 @@ static int __init hdaps_init(void) input_set_abs_params(hdaps_idev, ABS_Y, -256, 256, HDAPS_INPUT_FUZZ, HDAPS_INPUT_FLAT); - input_register_device(hdaps_idev); + ret = input_register_device(hdaps_idev); + if (ret) + goto out_idev; /* start up our timer for the input device */ init_timer(&hdaps_timer); @@ -598,6 +602,8 @@ static int __init hdaps_init(void) printk(KERN_INFO "hdaps: driver successfully loaded.\n"); return 0; +out_idev: + input_free_device(hdaps_idev); out_group: sysfs_remove_group(&pdev->dev.kobj, &hdaps_attribute_group); out_device: diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c index 06df92b3ee4..323ef06719c 100644 --- a/drivers/hwmon/it87.c +++ b/drivers/hwmon/it87.c @@ -4,10 +4,12 @@ Supports: IT8705F Super I/O chip w/LPC interface IT8712F Super I/O chip w/LPC interface & SMBus + IT8716F Super I/O chip w/LPC interface + IT8718F Super I/O chip w/LPC interface Sis950 A clone of the IT8705F Copyright (C) 2001 Chris Gauthron <chrisg@0-in.com> - Largely inspired by lm78.c of the same package + Copyright (C) 2005-2006 Jean Delvare <khali@linux-fr.org> This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by @@ -24,13 +26,6 @@ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -/* - djg@pdp8.net David Gesswein 7/18/01 - Modified to fix bug with not all alarms enabled. - Added ability to read battery voltage and select temperature sensor - type at module load time. -*/ - #include <linux/module.h> #include <linux/init.h> #include <linux/slab.h> @@ -42,6 +37,7 @@ #include <linux/hwmon-vid.h> #include <linux/err.h> #include <linux/mutex.h> +#include <linux/sysfs.h> #include <asm/io.h> @@ -50,12 +46,13 @@ static unsigned short normal_i2c[] = { 0x2d, I2C_CLIENT_END }; static unsigned short isa_address; /* Insmod parameters */ -I2C_CLIENT_INSMOD_2(it87, it8712); +I2C_CLIENT_INSMOD_4(it87, it8712, it8716, it8718); #define REG 0x2e /* The register to read/write */ #define DEV 0x07 /* Register: Logical device select */ #define VAL 0x2f /* The value to read/write */ #define PME 0x04 /* The device with the fan registers in it */ +#define GPIO 0x07 /* The device with the IT8718F VID value in it */ #define DEVID 0x20 /* Register: Device ID */ #define DEVREV 0x22 /* Register: Device Revision */ @@ -77,10 +74,10 @@ static int superio_inw(int reg) } static inline void -superio_select(void) +superio_select(int ldn) { outb(DEV, REG); - outb(PME, VAL); + outb(ldn, VAL); } static inline void @@ -99,20 +96,27 @@ superio_exit(void) outb(0x02, VAL); } +/* Logical device 4 registers */ #define IT8712F_DEVID 0x8712 #define IT8705F_DEVID 0x8705 +#define IT8716F_DEVID 0x8716 +#define IT8718F_DEVID 0x8718 #define IT87_ACT_REG 0x30 #define IT87_BASE_REG 0x60 +/* Logical device 7 registers (IT8712F and later) */ +#define IT87_SIO_PINX2_REG 0x2c /* Pin selection */ +#define IT87_SIO_VID_REG 0xfc /* VID value */ + /* Update battery voltage after every reading if true */ static int update_vbat; /* Not all BIOSes properly configure the PWM registers */ static int fix_pwm_polarity; -/* Chip Type */ - +/* Values read from Super-I/O config space */ static u16 chip_type; +static u8 vid_value; /* Many IT87 constants specified below */ @@ -131,13 +135,21 @@ static u16 chip_type; #define IT87_REG_ALARM2 0x02 #define IT87_REG_ALARM3 0x03 +/* The IT8718F has the VID value in a different register, in Super-I/O + configuration space. */ #define IT87_REG_VID 0x0a +/* Warning: register 0x0b is used for something completely different in + new chips/revisions. I suspect only 16-bit tachometer mode will work + for these. */ #define IT87_REG_FAN_DIV 0x0b +#define IT87_REG_FAN_16BIT 0x0c /* Monitors: 9 voltage (0 to 7, battery), 3 temp (1 to 3), 3 fan (1 to 3) */ #define IT87_REG_FAN(nr) (0x0d + (nr)) #define IT87_REG_FAN_MIN(nr) (0x10 + (nr)) +#define IT87_REG_FANX(nr) (0x18 + (nr)) +#define IT87_REG_FANX_MIN(nr) (0x1b + (nr)) #define IT87_REG_FAN_MAIN_CTRL 0x13 #define IT87_REG_FAN_CTL 0x14 #define IT87_REG_PWM(nr) (0x15 + (nr)) @@ -169,7 +181,16 @@ static inline u8 FAN_TO_REG(long rpm, int div) 254); } +static inline u16 FAN16_TO_REG(long rpm) +{ + if (rpm == 0) + return 0xffff; + return SENSORS_LIMIT((1350000 + rpm) / (rpm * 2), 1, 0xfffe); +} + #define FAN_FROM_REG(val,div) ((val)==0?-1:(val)==255?0:1350000/((val)*(div))) +/* The divider is fixed to 2 in 16-bit mode */ +#define FAN16_FROM_REG(val) ((val)==0?-1:(val)==0xffff?0:1350000/((val)*2)) #define TEMP_TO_REG(val) (SENSORS_LIMIT(((val)<0?(((val)-500)/1000):\ ((val)+500)/1000),-128,127)) @@ -181,7 +202,7 @@ static inline u8 FAN_TO_REG(long rpm, int div) static int DIV_TO_REG(int val) { int answer = 0; - while ((val >>= 1) != 0) + while (answer < 7 && (val >>= 1)) answer++; return answer; } @@ -203,10 +224,11 @@ struct it87_data { unsigned long last_updated; /* In jiffies */ u8 in[9]; /* Register value */ - u8 in_max[9]; /* Register value */ - u8 in_min[9]; /* Register value */ - u8 fan[3]; /* Register value */ - u8 fan_min[3]; /* Register value */ + u8 in_max[8]; /* Register value */ + u8 in_min[8]; /* Register value */ + u8 has_fan; /* Bitfield, fans enabled */ + u16 fan[3]; /* Register values, possibly combined */ + u16 fan_min[3]; /* Register values, possibly combined */ u8 temp[3]; /* Register value */ u8 temp_high[3]; /* Register value */ u8 temp_low[3]; /* Register value */ @@ -243,6 +265,7 @@ static struct i2c_driver it87_driver = { static struct i2c_driver it87_isa_driver = { .driver = { + .owner = THIS_MODULE, .name = "it87-isa", }, .attach_adapter = it87_isa_attach_adapter, @@ -544,15 +567,15 @@ static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr, struct i2c_client *client = to_i2c_client(dev); struct it87_data *data = i2c_get_clientdata(client); - int val = simple_strtol(buf, NULL, 10); - int i, min[3]; + unsigned long val = simple_strtoul(buf, NULL, 10); + int min; u8 old; mutex_lock(&data->update_lock); old = it87_read_value(client, IT87_REG_FAN_DIV); - for (i = 0; i < 3; i++) - min[i] = FAN_FROM_REG(data->fan_min[i], DIV_FROM_REG(data->fan_div[i])); + /* Save fan min limit */ + min = FAN_FROM_REG(data->fan_min[nr], DIV_FROM_REG(data->fan_div[nr])); switch (nr) { case 0: @@ -572,10 +595,10 @@ static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr, val |= 0x1 << 6; it87_write_value(client, IT87_REG_FAN_DIV, val); - for (i = 0; i < 3; i++) { - data->fan_min[i]=FAN_TO_REG(min[i], DIV_FROM_REG(data->fan_div[i])); - it87_write_value(client, IT87_REG_FAN_MIN(i), data->fan_min[i]); - } + /* Restore fan min limit */ + data->fan_min[nr] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr])); + it87_write_value(client, IT87_REG_FAN_MIN(nr), data->fan_min[nr]); + mutex_unlock(&data->update_lock); return count; } @@ -656,6 +679,59 @@ show_pwm_offset(1); show_pwm_offset(2); show_pwm_offset(3); +/* A different set of callbacks for 16-bit fans */ +static ssize_t show_fan16(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); + int nr = sensor_attr->index; + struct it87_data *data = it87_update_device(dev); + return sprintf(buf, "%d\n", FAN16_FROM_REG(data->fan[nr])); +} + +static ssize_t show_fan16_min(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); + int nr = sensor_attr->index; + struct it87_data *data = it87_update_device(dev); + return sprintf(buf, "%d\n", FAN16_FROM_REG(data->fan_min[nr])); +} + +static ssize_t set_fan16_min(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); + int nr = sensor_attr->index; + struct i2c_client *client = to_i2c_client(dev); + struct it87_data *data = i2c_get_clientdata(client); + int val = simple_strtol(buf, NULL, 10); + + mutex_lock(&data->update_lock); + data->fan_min[nr] = FAN16_TO_REG(val); + it87_write_value(client, IT87_REG_FAN_MIN(nr), + data->fan_min[nr] & 0xff); + it87_write_value(client, IT87_REG_FANX_MIN(nr), + data->fan_min[nr] >> 8); + mutex_unlock(&data->update_lock); + return count; +} + +/* We want to use the same sysfs file names as 8-bit fans, but we need + different variable names, so we have to use SENSOR_ATTR instead of + SENSOR_DEVICE_ATTR. */ +#define show_fan16_offset(offset) \ +static struct sensor_device_attribute sensor_dev_attr_fan##offset##_input16 \ + = SENSOR_ATTR(fan##offset##_input, S_IRUGO, \ + show_fan16, NULL, offset - 1); \ +static struct sensor_device_attribute sensor_dev_attr_fan##offset##_min16 \ + = SENSOR_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \ + show_fan16_min, set_fan16_min, offset - 1) + +show_fan16_offset(1); +show_fan16_offset(2); +show_fan16_offset(3); + /* Alarms */ static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, char *buf) { @@ -683,8 +759,6 @@ store_vrm_reg(struct device *dev, struct device_attribute *attr, const char *buf return count; } static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm_reg, store_vrm_reg); -#define device_create_file_vrm(client) \ -device_create_file(&client->dev, &dev_attr_vrm) static ssize_t show_vid_reg(struct device *dev, struct device_attribute *attr, char *buf) @@ -693,8 +767,88 @@ show_vid_reg(struct device *dev, struct device_attribute *attr, char *buf) return sprintf(buf, "%ld\n", (long) vid_from_reg(data->vid, data->vrm)); } static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid_reg, NULL); -#define device_create_file_vid(client) \ -device_create_file(&client->dev, &dev_attr_cpu0_vid) + +static struct attribute *it87_attributes[] = { + &sensor_dev_attr_in0_input.dev_attr.attr, + &sensor_dev_attr_in1_input.dev_attr.attr, + &sensor_dev_attr_in2_input.dev_attr.attr, + &sensor_dev_attr_in3_input.dev_attr.attr, + &sensor_dev_attr_in4_input.dev_attr.attr, + &sensor_dev_attr_in5_input.dev_attr.attr, + &sensor_dev_attr_in6_input.dev_attr.attr, + &sensor_dev_attr_in7_input.dev_attr.attr, + &sensor_dev_attr_in8_input.dev_attr.attr, + &sensor_dev_attr_in0_min.dev_attr.attr, + &sensor_dev_attr_in1_min.dev_attr.attr, + &sensor_dev_attr_in2_min.dev_attr.attr, + &sensor_dev_attr_in3_min.dev_attr.attr, + &sensor_dev_attr_in4_min.dev_attr.attr, + &sensor_dev_attr_in5_min.dev_attr.attr, + &sensor_dev_attr_in6_min.dev_attr.attr, + &sensor_dev_attr_in7_min.dev_attr.attr, + &sensor_dev_attr_in0_max.dev_attr.attr, + &sensor_dev_attr_in1_max.dev_attr.attr, + &sensor_dev_attr_in2_max.dev_attr.attr, + &sensor_dev_attr_in3_max.dev_attr.attr, + &sensor_dev_attr_in4_max.dev_attr.attr, + &sensor_dev_attr_in5_max.dev_attr.attr, + &sensor_dev_attr_in6_max.dev_attr.attr, + &sensor_dev_attr_in7_max.dev_attr.attr, + + &sensor_dev_attr_temp1_input.dev_attr.attr, + &sensor_dev_attr_temp2_input.dev_attr.attr, + &sensor_dev_attr_temp3_input.dev_attr.attr, + &sensor_dev_attr_temp1_max.dev_attr.attr, + &sensor_dev_attr_temp2_max.dev_attr.attr, + &sensor_dev_attr_temp3_max.dev_attr.attr, + &sensor_dev_attr_temp1_min.dev_attr.attr, + &sensor_dev_attr_temp2_min.dev_attr.attr, + &sensor_dev_attr_temp3_min.dev_attr.attr, + &sensor_dev_attr_temp1_type.dev_attr.attr, + &sensor_dev_attr_temp2_type.dev_attr.attr, + &sensor_dev_attr_temp3_type.dev_attr.attr, + + &dev_attr_alarms.attr, + NULL +}; + +static const struct attribute_group it87_group = { + .attrs = it87_attributes, +}; + +static struct attribute *it87_attributes_opt[] = { + &sensor_dev_attr_fan1_input16.dev_attr.attr, + &sensor_dev_attr_fan1_min16.dev_attr.attr, + &sensor_dev_attr_fan2_input16.dev_attr.attr, + &sensor_dev_attr_fan2_min16.dev_attr.attr, + &sensor_dev_attr_fan3_input16.dev_attr.attr, + &sensor_dev_attr_fan3_min16.dev_attr.attr, + + &sensor_dev_attr_fan1_input.dev_attr.attr, + &sensor_dev_attr_fan1_min.dev_attr.attr, + &sensor_dev_attr_fan1_div.dev_attr.attr, + &sensor_dev_attr_fan2_input.dev_attr.attr, + &sensor_dev_attr_fan2_min.dev_attr.attr, + &sensor_dev_attr_fan2_div.dev_attr.attr, + &sensor_dev_attr_fan3_input.dev_attr.attr, + &sensor_dev_attr_fan3_min.dev_attr.attr, + &sensor_dev_attr_fan3_div.dev_attr.attr, + + &sensor_dev_attr_pwm1_enable.dev_attr.attr, + &sensor_dev_attr_pwm2_enable.dev_attr.attr, + &sensor_dev_attr_pwm3_enable.dev_attr.attr, + &sensor_dev_attr_pwm1.dev_attr.attr, + &sensor_dev_attr_pwm2.dev_attr.attr, + &sensor_dev_attr_pwm3.dev_attr.attr, + + &dev_attr_vrm.attr, + &dev_attr_cpu0_vid.attr, + NULL +}; + +static const struct attribute_group it87_group_opt = { + .attrs = it87_attributes_opt, +}; /* This function is called when: * it87_driver is inserted (when this module is loaded), for each @@ -720,10 +874,12 @@ static int __init it87_find(unsigned short *address) superio_enter(); chip_type = superio_inw(DEVID); if (chip_type != IT8712F_DEVID + && chip_type != IT8716F_DEVID + && chip_type != IT8718F_DEVID && chip_type != IT8705F_DEVID) goto exit; - superio_select(); + superio_select(PME); if (!(superio_inb(IT87_ACT_REG) & 0x01)) { pr_info("it87: Device not activated, skipping\n"); goto exit; @@ -739,6 +895,21 @@ static int __init it87_find(unsigned short *address) pr_info("it87: Found IT%04xF chip at 0x%x, revision %d\n", chip_type, *address, superio_inb(DEVREV) & 0x0f); + /* Read GPIO config and VID value from LDN 7 (GPIO) */ + if (chip_type != IT8705F_DEVID) { + int reg; + + superio_select(GPIO); + if (chip_type == it8718) + vid_value = superio_inb(IT87_SIO_VID_REG); + + reg = superio_inb(IT87_SIO_PINX2_REG); + if (reg & (1 << 0)) + pr_info("it87: in3 is VCC (+5V)\n"); + if (reg & (1 << 1)) + pr_info("it87: in7 is VCCH (+5V Stand-By)\n"); + } + exit: superio_exit(); return err; @@ -799,8 +970,19 @@ static int it87_detect(struct i2c_adapter *adapter, int address, int kind) i = it87_read_value(new_client, IT87_REG_CHIPID); if (i == 0x90) { kind = it87; - if ((is_isa) && (chip_type == IT8712F_DEVID)) - kind = it8712; + if (is_isa) { + switch (chip_type) { + case IT8712F_DEVID: + kind = it8712; + break; + case IT8716F_DEVID: + kind = it8716; + break; + case IT8718F_DEVID: + kind = it8718; + break; + } + } } else { if (kind == 0) @@ -817,6 +999,10 @@ static int it87_detect(struct i2c_adapter *adapter, int address, int kind) name = "it87"; } else if (kind == it8712) { name = "it8712"; + } else if (kind == it8716) { + name = "it8716"; + } else if (kind == it8718) { + name = "it8718"; } /* Fill in the remaining client fields and put it into the global list */ @@ -841,76 +1027,103 @@ static int it87_detect(struct i2c_adapter *adapter, int address, int kind) it87_init_client(new_client, data); /* Register sysfs hooks */ - data->class_dev = hwmon_device_register(&new_client->dev); - if (IS_ERR(data->class_dev)) { - err = PTR_ERR(data->class_dev); + if ((err = sysfs_create_group(&new_client->dev.kobj, &it87_group))) goto ERROR3; + + /* Do not create fan files for disabled fans */ + if (data->type == it8716 || data->type == it8718) { + /* 16-bit tachometers */ + if (data->has_fan & (1 << 0)) { + if ((err = device_create_file(&new_client->dev, + &sensor_dev_attr_fan1_input16.dev_attr)) + || (err = device_create_file(&new_client->dev, + &sensor_dev_attr_fan1_min16.dev_attr))) + goto ERROR4; + } + if (data->has_fan & (1 << 1)) { + if ((err = device_create_file(&new_client->dev, + &sensor_dev_attr_fan2_input16.dev_attr)) + || (err = device_create_file(&new_client->dev, + &sensor_dev_attr_fan2_min16.dev_attr))) + goto ERROR4; + } + if (data->has_fan & (1 << 2)) { + if ((err = device_create_file(&new_client->dev, + &sensor_dev_attr_fan3_input16.dev_attr)) + || (err = device_create_file(&new_client->dev, + &sensor_dev_attr_fan3_min16.dev_attr))) + goto ERROR4; + } + } else { + /* 8-bit tachometers with clock divider */ + if (data->has_fan & (1 << 0)) { + if ((err = device_create_file(&new_client->dev, + &sensor_dev_attr_fan1_input.dev_attr)) + || (err = device_create_file(&new_client->dev, + &sensor_dev_attr_fan1_min.dev_attr)) + || (err = device_create_file(&new_client->dev, + &sensor_dev_attr_fan1_div.dev_attr))) + goto ERROR4; + } + if (data->has_fan & (1 << 1)) { + if ((err = device_create_file(&new_client->dev, + &sensor_dev_attr_fan2_input.dev_attr)) + || (err = device_create_file(&new_client->dev, + &sensor_dev_attr_fan2_min.dev_attr)) + || (err = device_create_file(&new_client->dev, + &sensor_dev_attr_fan2_div.dev_attr))) + goto ERROR4; + } + if (data->has_fan & (1 << 2)) { + if ((err = device_create_file(&new_client->dev, + &sensor_dev_attr_fan3_input.dev_attr)) + || (err = device_create_file(&new_client->dev, + &sensor_dev_attr_fan3_min.dev_attr)) + || (err = device_create_file(&new_client->dev, + &sensor_dev_attr_fan3_div.dev_attr))) + goto ERROR4; + } } - device_create_file(&new_client->dev, &sensor_dev_attr_in0_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in1_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in2_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in3_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in4_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in5_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in6_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in7_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in8_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in0_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in1_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in2_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in3_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in4_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in5_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in6_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in7_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in0_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in1_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in2_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in3_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in4_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in5_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in6_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in7_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp1_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp2_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp3_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp1_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp2_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp3_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp1_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp2_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp3_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp1_type.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp2_type.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp3_type.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_fan1_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_fan2_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_fan3_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_fan1_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_fan2_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_fan3_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_fan1_div.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_fan2_div.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_fan3_div.dev_attr); - device_create_file(&new_client->dev, &dev_attr_alarms); if (enable_pwm_interface) { - device_create_file(&new_client->dev, &sensor_dev_attr_pwm1_enable.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_pwm2_enable.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_pwm3_enable.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_pwm1.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_pwm2.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_pwm3.dev_attr); + if ((err = device_create_file(&new_client->dev, + &sensor_dev_attr_pwm1_enable.dev_attr)) + || (err = device_create_file(&new_client->dev, + &sensor_dev_attr_pwm2_enable.dev_attr)) + || (err = device_create_file(&new_client->dev, + &sensor_dev_attr_pwm3_enable.dev_attr)) + || (err = device_create_file(&new_client->dev, + &sensor_dev_attr_pwm1.dev_attr)) + || (err = device_create_file(&new_client->dev, + &sensor_dev_attr_pwm2.dev_attr)) + || (err = device_create_file(&new_client->dev, + &sensor_dev_attr_pwm3.dev_attr))) + goto ERROR4; } - if (data->type == it8712) { + if (data->type == it8712 || data->type == it8716 + || data->type == it8718) { data->vrm = vid_which_vrm(); - device_create_file_vrm(new_client); - device_create_file_vid(new_client); + /* VID reading from Super-I/O config space if available */ + data->vid = vid_value; + if ((err = device_create_file(&new_client->dev, + &dev_attr_vrm)) + || (err = device_create_file(&new_client->dev, + &dev_attr_cpu0_vid))) + goto ERROR4; + } + + data->class_dev = hwmon_device_register(&new_client->dev); + if (IS_ERR(data->class_dev)) { + err = PTR_ERR(data->class_dev); + goto ERROR4; } return 0; +ERROR4: + sysfs_remove_group(&new_client->dev.kobj, &it87_group); + sysfs_remove_group(&new_client->dev.kobj, &it87_group_opt); ERROR3: i2c_detach_client(new_client); ERROR2: @@ -928,6 +1141,8 @@ static int it87_detach_client(struct i2c_client *client) int err; hwmon_device_unregister(data->class_dev); + sysfs_remove_group(&client->dev.kobj, &it87_group); + sysfs_remove_group(&client->dev.kobj, &it87_group_opt); if ((err = i2c_detach_client(client))) return err; @@ -1044,6 +1259,22 @@ static void it87_init_client(struct i2c_client *client, struct it87_data *data) data->manual_pwm_ctl[i] = 0xff; } + /* Some chips seem to have default value 0xff for all limit + * registers. For low voltage limits it makes no sense and triggers + * alarms, so change to 0 instead. For high temperature limits, it + * means -1 degree C, which surprisingly doesn't trigger an alarm, + * but is still confusing, so change to 127 degrees C. */ + for (i = 0; i < 8; i++) { + tmp = it87_read_value(client, IT87_REG_VIN_MIN(i)); + if (tmp == 0xff) + it87_write_value(client, IT87_REG_VIN_MIN(i), 0); + } + for (i = 0; i < 3; i++) { + tmp = it87_read_value(client, IT87_REG_TEMP_HIGH(i)); + if (tmp == 0xff) + it87_write_value(client, IT87_REG_TEMP_HIGH(i), 127); + } + /* Check if temperature channnels are reset manually or by some reason */ tmp = it87_read_value(client, IT87_REG_TEMP_ENABLE); if ((tmp & 0x3f) == 0) { @@ -1067,6 +1298,18 @@ static void it87_init_client(struct i2c_client *client, struct it87_data *data) data->fan_main_ctrl |= 0x70; it87_write_value(client, IT87_REG_FAN_MAIN_CTRL, data->fan_main_ctrl); } + data->has_fan = (data->fan_main_ctrl >> 4) & 0x07; + + /* Set tachometers to 16-bit mode if needed */ + if (data->type == it8716 || data->type == it8718) { + tmp = it87_read_value(client, IT87_REG_FAN_16BIT); + if (~tmp & 0x07 & data->has_fan) { + dev_dbg(&client->dev, + "Setting fan1-3 to 16-bit mode\n"); + it87_write_value(client, IT87_REG_FAN_16BIT, + tmp | 0x07); + } + } /* Set current fan mode registers and the default settings for the * other mode registers */ @@ -1117,18 +1360,26 @@ static struct it87_data *it87_update_device(struct device *dev) data->in_max[i] = it87_read_value(client, IT87_REG_VIN_MAX(i)); } + /* in8 (battery) has no limit registers */ data->in[8] = it87_read_value(client, IT87_REG_VIN(8)); - /* Temperature sensor doesn't have limit registers, set - to min and max value */ - data->in_min[8] = 0; - data->in_max[8] = 255; for (i = 0; i < 3; i++) { - data->fan[i] = - it87_read_value(client, IT87_REG_FAN(i)); + /* Skip disabled fans */ + if (!(data->has_fan & (1 << i))) + continue; + data->fan_min[i] = it87_read_value(client, IT87_REG_FAN_MIN(i)); + data->fan[i] = it87_read_value(client, + IT87_REG_FAN(i)); + /* Add high byte if in 16-bit mode */ + if (data->type == it8716 || data->type == it8718) { + data->fan[i] |= it87_read_value(client, + IT87_REG_FANX(i)) << 8; + data->fan_min[i] |= it87_read_value(client, + IT87_REG_FANX_MIN(i)) << 8; + } } for (i = 0; i < 3; i++) { data->temp[i] = @@ -1139,10 +1390,14 @@ static struct it87_data *it87_update_device(struct device *dev) it87_read_value(client, IT87_REG_TEMP_LOW(i)); } - i = it87_read_value(client, IT87_REG_FAN_DIV); - data->fan_div[0] = i & 0x07; - data->fan_div[1] = (i >> 3) & 0x07; - data->fan_div[2] = (i & 0x40) ? 3 : 1; + /* Newer chips don't have clock dividers */ + if ((data->has_fan & 0x07) && data->type != it8716 + && data->type != it8718) { + i = it87_read_value(client, IT87_REG_FAN_DIV); + data->fan_div[0] = i & 0x07; + data->fan_div[1] = (i >> 3) & 0x07; + data->fan_div[2] = (i & 0x40) ? 3 : 1; + } data->alarms = it87_read_value(client, IT87_REG_ALARM1) | @@ -1152,9 +1407,11 @@ static struct it87_data *it87_update_device(struct device *dev) data->sensor = it87_read_value(client, IT87_REG_TEMP_ENABLE); /* The 8705 does not have VID capability */ - if (data->type == it8712) { + if (data->type == it8712 || data->type == it8716) { data->vid = it87_read_value(client, IT87_REG_VID); - data->vid &= 0x1f; + /* The older IT8712F revisions had only 5 VID pins, + but we assume it is always safe to read 6 bits. */ + data->vid &= 0x3f; } data->last_updated = jiffies; data->valid = 1; @@ -1192,8 +1449,9 @@ static void __exit sm_it87_exit(void) } -MODULE_AUTHOR("Chris Gauthron <chrisg@0-in.com>"); -MODULE_DESCRIPTION("IT8705F, IT8712F, Sis950 driver"); +MODULE_AUTHOR("Chris Gauthron <chrisg@0-in.com>, " + "Jean Delvare <khali@linux-fr.org>"); +MODULE_DESCRIPTION("IT8705F/8712F/8716F/8718F, SiS950 driver"); module_param(update_vbat, bool, 0); MODULE_PARM_DESC(update_vbat, "Update vbat if set else return powerup value"); module_param(fix_pwm_polarity, bool, 0); diff --git a/drivers/hwmon/k8temp.c b/drivers/hwmon/k8temp.c new file mode 100644 index 00000000000..f58b64ed09e --- /dev/null +++ b/drivers/hwmon/k8temp.c @@ -0,0 +1,294 @@ +/* + * k8temp.c - Linux kernel module for hardware monitoring + * + * Copyright (C) 2006 Rudolf Marek <r.marek@sh.cvut.cz> + * + * Inspired from the w83785 and amd756 drivers. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301 USA. + */ + +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/jiffies.h> +#include <linux/pci.h> +#include <linux/hwmon.h> +#include <linux/hwmon-sysfs.h> +#include <linux/err.h> +#include <linux/mutex.h> + +#define TEMP_FROM_REG(val) (((((val) >> 16) & 0xff) - 49) * 1000) +#define REG_TEMP 0xe4 +#define SEL_PLACE 0x40 +#define SEL_CORE 0x04 + +struct k8temp_data { + struct class_device *class_dev; + struct mutex update_lock; + const char *name; + char valid; /* zero until following fields are valid */ + unsigned long last_updated; /* in jiffies */ + + /* registers values */ + u8 sensorsp; /* sensor presence bits - SEL_CORE & SEL_PLACE */ + u32 temp[2][2]; /* core, place */ +}; + +static struct k8temp_data *k8temp_update_device(struct device *dev) +{ + struct k8temp_data *data = dev_get_drvdata(dev); + struct pci_dev *pdev = to_pci_dev(dev); + u8 tmp; + + mutex_lock(&data->update_lock); + + if (!data->valid + || time_after(jiffies, data->last_updated + HZ)) { + pci_read_config_byte(pdev, REG_TEMP, &tmp); + tmp &= ~(SEL_PLACE | SEL_CORE); /* Select sensor 0, core0 */ + pci_write_config_byte(pdev, REG_TEMP, tmp); + pci_read_config_dword(pdev, REG_TEMP, &data->temp[0][0]); + + if (data->sensorsp & SEL_PLACE) { + tmp |= SEL_PLACE; /* Select sensor 1, core0 */ + pci_write_config_byte(pdev, REG_TEMP, tmp); + pci_read_config_dword(pdev, REG_TEMP, + &data->temp[0][1]); + } + + if (data->sensorsp & SEL_CORE) { + tmp &= ~SEL_PLACE; /* Select sensor 0, core1 */ + tmp |= SEL_CORE; + pci_write_config_byte(pdev, REG_TEMP, tmp); + pci_read_config_dword(pdev, REG_TEMP, + &data->temp[1][0]); + + if (data->sensorsp & SEL_PLACE) { + tmp |= SEL_PLACE; /* Select sensor 1, core1 */ + pci_write_config_byte(pdev, REG_TEMP, tmp); + pci_read_config_dword(pdev, REG_TEMP, + &data->temp[1][1]); + } + } + + data->last_updated = jiffies; + data->valid = 1; + } + + mutex_unlock(&data->update_lock); + return data; +} + +/* + * Sysfs stuff + */ + +static ssize_t show_name(struct device *dev, struct device_attribute + *devattr, char *buf) +{ + struct k8temp_data *data = dev_get_drvdata(dev); + + return sprintf(buf, "%s\n", data->name); +} + + +static ssize_t show_temp(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + struct sensor_device_attribute_2 *attr = + to_sensor_dev_attr_2(devattr); + int core = attr->nr; + int place = attr->index; + struct k8temp_data *data = k8temp_update_device(dev); + + return sprintf(buf, "%d\n", + TEMP_FROM_REG(data->temp[core][place])); +} + +/* core, place */ + +static SENSOR_DEVICE_ATTR_2(temp1_input, S_IRUGO, show_temp, NULL, 0, 0); +static SENSOR_DEVICE_ATTR_2(temp2_input, S_IRUGO, show_temp, NULL, 0, 1); +static SENSOR_DEVICE_ATTR_2(temp3_input, S_IRUGO, show_temp, NULL, 1, 0); +static SENSOR_DEVICE_ATTR_2(temp4_input, S_IRUGO, show_temp, NULL, 1, 1); +static DEVICE_ATTR(name, S_IRUGO, show_name, NULL); + +static struct pci_device_id k8temp_ids[] = { + { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB_MISC) }, + { 0 }, +}; + +MODULE_DEVICE_TABLE(pci, k8temp_ids); + +static int __devinit k8temp_probe(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + int err; + u8 scfg; + u32 temp; + struct k8temp_data *data; + u32 cpuid = cpuid_eax(1); + + /* this feature should be available since SH-C0 core */ + if ((cpuid == 0xf40) || (cpuid == 0xf50) || (cpuid == 0xf51)) { + err = -ENODEV; + goto exit; + } + + if (!(data = kzalloc(sizeof(struct k8temp_data), GFP_KERNEL))) { + err = -ENOMEM; + goto exit; + } + + pci_read_config_byte(pdev, REG_TEMP, &scfg); + scfg &= ~(SEL_PLACE | SEL_CORE); /* Select sensor 0, core0 */ + pci_write_config_byte(pdev, REG_TEMP, scfg); + pci_read_config_byte(pdev, REG_TEMP, &scfg); + + if (scfg & (SEL_PLACE | SEL_CORE)) { + dev_err(&pdev->dev, "Configuration bit(s) stuck at 1!\n"); + err = -ENODEV; + goto exit_free; + } + + scfg |= (SEL_PLACE | SEL_CORE); + pci_write_config_byte(pdev, REG_TEMP, scfg); + + /* now we know if we can change core and/or sensor */ + pci_read_config_byte(pdev, REG_TEMP, &data->sensorsp); + + if (data->sensorsp & SEL_PLACE) { + scfg &= ~SEL_CORE; /* Select sensor 1, core0 */ + pci_write_config_byte(pdev, REG_TEMP, scfg); + pci_read_config_dword(pdev, REG_TEMP, &temp); + scfg |= SEL_CORE; /* prepare for next selection */ + if (!((temp >> 16) & 0xff)) /* if temp is 0 -49C is not likely */ + data->sensorsp &= ~SEL_PLACE; + } + + if (data->sensorsp & SEL_CORE) { + scfg &= ~SEL_PLACE; /* Select sensor 0, core1 */ + pci_write_config_byte(pdev, REG_TEMP, scfg); + pci_read_config_dword(pdev, REG_TEMP, &temp); + if (!((temp >> 16) & 0xff)) /* if temp is 0 -49C is not likely */ + data->sensorsp &= ~SEL_CORE; + } + + data->name = "k8temp"; + mutex_init(&data->update_lock); + dev_set_drvdata(&pdev->dev, data); + + /* Register sysfs hooks */ + err = device_create_file(&pdev->dev, + &sensor_dev_attr_temp1_input.dev_attr); + if (err) + goto exit_remove; + + /* sensor can be changed and reports something */ + if (data->sensorsp & SEL_PLACE) { + err = device_create_file(&pdev->dev, + &sensor_dev_attr_temp2_input.dev_attr); + if (err) + goto exit_remove; + } + + /* core can be changed and reports something */ + if (data->sensorsp & SEL_CORE) { + err = device_create_file(&pdev->dev, + &sensor_dev_attr_temp3_input.dev_attr); + if (err) + goto exit_remove; + if (data->sensorsp & SEL_PLACE) + err = device_create_file(&pdev->dev, + &sensor_dev_attr_temp4_input. + dev_attr); + if (err) + goto exit_remove; + } + + err = device_create_file(&pdev->dev, &dev_attr_name); + if (err) + goto exit_remove; + + data->class_dev = hwmon_device_register(&pdev->dev); + + if (IS_ERR(data->class_dev)) { + err = PTR_ERR(data->class_dev); + goto exit_remove; + } + + return 0; + +exit_remove: + device_remove_file(&pdev->dev, + &sensor_dev_attr_temp1_input.dev_attr); + device_remove_file(&pdev->dev, + &sensor_dev_attr_temp2_input.dev_attr); + device_remove_file(&pdev->dev, + &sensor_dev_attr_temp3_input.dev_attr); + device_remove_file(&pdev->dev, + &sensor_dev_attr_temp4_input.dev_attr); + device_remove_file(&pdev->dev, &dev_attr_name); +exit_free: + dev_set_drvdata(&pdev->dev, NULL); + kfree(data); +exit: + return err; +} + +static void __devexit k8temp_remove(struct pci_dev *pdev) +{ + struct k8temp_data *data = dev_get_drvdata(&pdev->dev); + + hwmon_device_unregister(data->class_dev); + device_remove_file(&pdev->dev, + &sensor_dev_attr_temp1_input.dev_attr); + device_remove_file(&pdev->dev, + &sensor_dev_attr_temp2_input.dev_attr); + device_remove_file(&pdev->dev, + &sensor_dev_attr_temp3_input.dev_attr); + device_remove_file(&pdev->dev, + &sensor_dev_attr_temp4_input.dev_attr); + device_remove_file(&pdev->dev, &dev_attr_name); + dev_set_drvdata(&pdev->dev, NULL); + kfree(data); +} + +static struct pci_driver k8temp_driver = { + .name = "k8temp", + .id_table = k8temp_ids, + .probe = k8temp_probe, + .remove = __devexit_p(k8temp_remove), +}; + +static int __init k8temp_init(void) +{ + return pci_register_driver(&k8temp_driver); +} + +static void __exit k8temp_exit(void) +{ + pci_unregister_driver(&k8temp_driver); +} + +MODULE_AUTHOR("Rudolf Marek <r.marek@sh.cvut.cz>"); +MODULE_DESCRIPTION("AMD K8 core temperature monitor"); +MODULE_LICENSE("GPL"); + +module_init(k8temp_init) +module_exit(k8temp_exit) diff --git a/drivers/hwmon/lm63.c b/drivers/hwmon/lm63.c index 071f0fc6ade..d69f3cf0712 100644 --- a/drivers/hwmon/lm63.c +++ b/drivers/hwmon/lm63.c @@ -1,7 +1,7 @@ /* * lm63.c - driver for the National Semiconductor LM63 temperature sensor * with integrated fan control - * Copyright (C) 2004-2005 Jean Delvare <khali@linux-fr.org> + * Copyright (C) 2004-2006 Jean Delvare <khali@linux-fr.org> * Based on the lm90 driver. * * The LM63 is a sensor chip made by National Semiconductor. It measures @@ -46,6 +46,7 @@ #include <linux/hwmon.h> #include <linux/err.h> #include <linux/mutex.h> +#include <linux/sysfs.h> /* * Addresses to scan @@ -330,6 +331,16 @@ static ssize_t show_alarms(struct device *dev, struct device_attribute *dummy, return sprintf(buf, "%u\n", data->alarms); } +static ssize_t show_alarm(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct lm63_data *data = lm63_update_device(dev); + int bitnr = attr->index; + + return sprintf(buf, "%u\n", (data->alarms >> bitnr) & 1); +} + static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0); static SENSOR_DEVICE_ATTR(fan1_min, S_IWUSR | S_IRUGO, show_fan, set_fan, 1); @@ -350,8 +361,52 @@ static SENSOR_DEVICE_ATTR(temp2_crit, S_IRUGO, show_temp8, NULL, 2); static DEVICE_ATTR(temp2_crit_hyst, S_IWUSR | S_IRUGO, show_temp2_crit_hyst, set_temp2_crit_hyst); +/* Individual alarm files */ +static SENSOR_DEVICE_ATTR(fan1_min_alarm, S_IRUGO, show_alarm, NULL, 0); +static SENSOR_DEVICE_ATTR(temp2_crit_alarm, S_IRUGO, show_alarm, NULL, 1); +static SENSOR_DEVICE_ATTR(temp2_input_fault, S_IRUGO, show_alarm, NULL, 2); +static SENSOR_DEVICE_ATTR(temp2_min_alarm, S_IRUGO, show_alarm, NULL, 3); +static SENSOR_DEVICE_ATTR(temp2_max_alarm, S_IRUGO, show_alarm, NULL, 4); +static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, show_alarm, NULL, 6); +/* Raw alarm file for compatibility */ static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); +static struct attribute *lm63_attributes[] = { + &dev_attr_pwm1.attr, + &dev_attr_pwm1_enable.attr, + &sensor_dev_attr_temp1_input.dev_attr.attr, + &sensor_dev_attr_temp2_input.dev_attr.attr, + &sensor_dev_attr_temp2_min.dev_attr.attr, + &sensor_dev_attr_temp1_max.dev_attr.attr, + &sensor_dev_attr_temp2_max.dev_attr.attr, + &sensor_dev_attr_temp2_crit.dev_attr.attr, + &dev_attr_temp2_crit_hyst.attr, + + &sensor_dev_attr_temp2_crit_alarm.dev_attr.attr, + &sensor_dev_attr_temp2_input_fault.dev_attr.attr, + &sensor_dev_attr_temp2_min_alarm.dev_attr.attr, + &sensor_dev_attr_temp2_max_alarm.dev_attr.attr, + &sensor_dev_attr_temp1_max_alarm.dev_attr.attr, + &dev_attr_alarms.attr, + NULL +}; + +static const struct attribute_group lm63_group = { + .attrs = lm63_attributes, +}; + +static struct attribute *lm63_attributes_fan1[] = { + &sensor_dev_attr_fan1_input.dev_attr.attr, + &sensor_dev_attr_fan1_min.dev_attr.attr, + + &sensor_dev_attr_fan1_min_alarm.dev_attr.attr, + NULL +}; + +static const struct attribute_group lm63_group_fan1 = { + .attrs = lm63_attributes_fan1, +}; + /* * Real code */ @@ -438,37 +493,26 @@ static int lm63_detect(struct i2c_adapter *adapter, int address, int kind) lm63_init_client(new_client); /* Register sysfs hooks */ - data->class_dev = hwmon_device_register(&new_client->dev); - if (IS_ERR(data->class_dev)) { - err = PTR_ERR(data->class_dev); + if ((err = sysfs_create_group(&new_client->dev.kobj, + &lm63_group))) goto exit_detach; + if (data->config & 0x04) { /* tachometer enabled */ + if ((err = sysfs_create_group(&new_client->dev.kobj, + &lm63_group_fan1))) + goto exit_remove_files; } - if (data->config & 0x04) { /* tachometer enabled */ - device_create_file(&new_client->dev, - &sensor_dev_attr_fan1_input.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_fan1_min.dev_attr); + data->class_dev = hwmon_device_register(&new_client->dev); + if (IS_ERR(data->class_dev)) { + err = PTR_ERR(data->class_dev); + goto exit_remove_files; } - device_create_file(&new_client->dev, &dev_attr_pwm1); - device_create_file(&new_client->dev, &dev_attr_pwm1_enable); - device_create_file(&new_client->dev, - &sensor_dev_attr_temp1_input.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_temp2_input.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_temp2_min.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_temp1_max.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_temp2_max.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_temp2_crit.dev_attr); - device_create_file(&new_client->dev, &dev_attr_temp2_crit_hyst); - device_create_file(&new_client->dev, &dev_attr_alarms); return 0; +exit_remove_files: + sysfs_remove_group(&new_client->dev.kobj, &lm63_group); + sysfs_remove_group(&new_client->dev.kobj, &lm63_group_fan1); exit_detach: i2c_detach_client(new_client); exit_free: @@ -518,6 +562,8 @@ static int lm63_detach_client(struct i2c_client *client) int err; hwmon_device_unregister(data->class_dev); + sysfs_remove_group(&client->dev.kobj, &lm63_group); + sysfs_remove_group(&client->dev.kobj, &lm63_group_fan1); if ((err = i2c_detach_client(client))) return err; diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c index fc25b90ec24..7c65b8bb6d7 100644 --- a/drivers/hwmon/lm75.c +++ b/drivers/hwmon/lm75.c @@ -112,6 +112,18 @@ static int lm75_attach_adapter(struct i2c_adapter *adapter) return i2c_probe(adapter, &addr_data, lm75_detect); } +static struct attribute *lm75_attributes[] = { + &dev_attr_temp1_input.attr, + &dev_attr_temp1_max.attr, + &dev_attr_temp1_max_hyst.attr, + + NULL +}; + +static const struct attribute_group lm75_group = { + .attrs = lm75_attributes, +}; + /* This function is called by i2c_probe */ static int lm75_detect(struct i2c_adapter *adapter, int address, int kind) { @@ -199,18 +211,19 @@ static int lm75_detect(struct i2c_adapter *adapter, int address, int kind) lm75_init_client(new_client); /* Register sysfs hooks */ + if ((err = sysfs_create_group(&new_client->dev.kobj, &lm75_group))) + goto exit_detach; + data->class_dev = hwmon_device_register(&new_client->dev); if (IS_ERR(data->class_dev)) { err = PTR_ERR(data->class_dev); - goto exit_detach; + goto exit_remove; } - device_create_file(&new_client->dev, &dev_attr_temp1_max); - device_create_file(&new_client->dev, &dev_attr_temp1_max_hyst); - device_create_file(&new_client->dev, &dev_attr_temp1_input); - return 0; +exit_remove: + sysfs_remove_group(&new_client->dev.kobj, &lm75_group); exit_detach: i2c_detach_client(new_client); exit_free: @@ -223,6 +236,7 @@ static int lm75_detach_client(struct i2c_client *client) { struct lm75_data *data = i2c_get_clientdata(client); hwmon_device_unregister(data->class_dev); + sysfs_remove_group(&client->dev.kobj, &lm75_group); i2c_detach_client(client); kfree(data); return 0; diff --git a/drivers/hwmon/lm77.c b/drivers/hwmon/lm77.c index 459cc977380..dd969f1e841 100644 --- a/drivers/hwmon/lm77.c +++ b/drivers/hwmon/lm77.c @@ -212,6 +212,23 @@ static int lm77_attach_adapter(struct i2c_adapter *adapter) return i2c_probe(adapter, &addr_data, lm77_detect); } +static struct attribute *lm77_attributes[] = { + &dev_attr_temp1_input.attr, + &dev_attr_temp1_crit.attr, + &dev_attr_temp1_min.attr, + &dev_attr_temp1_max.attr, + &dev_attr_temp1_crit_hyst.attr, + &dev_attr_temp1_min_hyst.attr, + &dev_attr_temp1_max_hyst.attr, + &dev_attr_alarms.attr, + + NULL +}; + +static const struct attribute_group lm77_group = { + .attrs = lm77_attributes, +}; + /* This function is called by i2c_probe */ static int lm77_detect(struct i2c_adapter *adapter, int address, int kind) { @@ -317,22 +334,19 @@ static int lm77_detect(struct i2c_adapter *adapter, int address, int kind) lm77_init_client(new_client); /* Register sysfs hooks */ + if ((err = sysfs_create_group(&new_client->dev.kobj, &lm77_group))) + goto exit_detach; + data->class_dev = hwmon_device_register(&new_client->dev); if (IS_ERR(data->class_dev)) { err = PTR_ERR(data->class_dev); - goto exit_detach; + goto exit_remove; } - device_create_file(&new_client->dev, &dev_attr_temp1_input); - device_create_file(&new_client->dev, &dev_attr_temp1_crit); - device_create_file(&new_client->dev, &dev_attr_temp1_min); - device_create_file(&new_client->dev, &dev_attr_temp1_max); - device_create_file(&new_client->dev, &dev_attr_temp1_crit_hyst); - device_create_file(&new_client->dev, &dev_attr_temp1_min_hyst); - device_create_file(&new_client->dev, &dev_attr_temp1_max_hyst); - device_create_file(&new_client->dev, &dev_attr_alarms); return 0; +exit_remove: + sysfs_remove_group(&new_client->dev.kobj, &lm77_group); exit_detach: i2c_detach_client(new_client); exit_free: @@ -345,6 +359,7 @@ static int lm77_detach_client(struct i2c_client *client) { struct lm77_data *data = i2c_get_clientdata(client); hwmon_device_unregister(data->class_dev); + sysfs_remove_group(&client->dev.kobj, &lm77_group); i2c_detach_client(client); kfree(data); return 0; diff --git a/drivers/hwmon/lm78.c b/drivers/hwmon/lm78.c index a6ce7abf860..73bc2ffc598 100644 --- a/drivers/hwmon/lm78.c +++ b/drivers/hwmon/lm78.c @@ -175,6 +175,7 @@ static struct i2c_driver lm78_driver = { static struct i2c_driver lm78_isa_driver = { .driver = { + .owner = THIS_MODULE, .name = "lm78-isa", }, .attach_adapter = lm78_isa_attach_adapter, @@ -481,6 +482,50 @@ static int lm78_isa_attach_adapter(struct i2c_adapter *adapter) return lm78_detect(adapter, isa_address, -1); } +static struct attribute *lm78_attributes[] = { + &dev_attr_in0_input.attr, + &dev_attr_in0_min.attr, + &dev_attr_in0_max.attr, + &dev_attr_in1_input.attr, + &dev_attr_in1_min.attr, + &dev_attr_in1_max.attr, + &dev_attr_in2_input.attr, + &dev_attr_in2_min.attr, + &dev_attr_in2_max.attr, + &dev_attr_in3_input.attr, + &dev_attr_in3_min.attr, + &dev_attr_in3_max.attr, + &dev_attr_in4_input.attr, + &dev_attr_in4_min.attr, + &dev_attr_in4_max.attr, + &dev_attr_in5_input.attr, + &dev_attr_in5_min.attr, + &dev_attr_in5_max.attr, + &dev_attr_in6_input.attr, + &dev_attr_in6_min.attr, + &dev_attr_in6_max.attr, + &dev_attr_temp1_input.attr, + &dev_attr_temp1_max.attr, + &dev_attr_temp1_max_hyst.attr, + &dev_attr_fan1_input.attr, + &dev_attr_fan1_min.attr, + &dev_attr_fan1_div.attr, + &dev_attr_fan2_input.attr, + &dev_attr_fan2_min.attr, + &dev_attr_fan2_div.attr, + &dev_attr_fan3_input.attr, + &dev_attr_fan3_min.attr, + &dev_attr_fan3_div.attr, + &dev_attr_alarms.attr, + &dev_attr_cpu0_vid.attr, + + NULL +}; + +static const struct attribute_group lm78_group = { + .attrs = lm78_attributes, +}; + /* This function is called by i2c_probe */ static int lm78_detect(struct i2c_adapter *adapter, int address, int kind) { @@ -615,50 +660,19 @@ static int lm78_detect(struct i2c_adapter *adapter, int address, int kind) } /* Register sysfs hooks */ + if ((err = sysfs_create_group(&new_client->dev.kobj, &lm78_group))) + goto ERROR3; + data->class_dev = hwmon_device_register(&new_client->dev); if (IS_ERR(data->class_dev)) { err = PTR_ERR(data->class_dev); - goto ERROR3; + goto ERROR4; } - device_create_file(&new_client->dev, &dev_attr_in0_input); - device_create_file(&new_client->dev, &dev_attr_in0_min); - device_create_file(&new_client->dev, &dev_attr_in0_max); - device_create_file(&new_client->dev, &dev_attr_in1_input); - device_create_file(&new_client->dev, &dev_attr_in1_min); - device_create_file(&new_client->dev, &dev_attr_in1_max); - device_create_file(&new_client->dev, &dev_attr_in2_input); - device_create_file(&new_client->dev, &dev_attr_in2_min); - device_create_file(&new_client->dev, &dev_attr_in2_max); - device_create_file(&new_client->dev, &dev_attr_in3_input); - device_create_file(&new_client->dev, &dev_attr_in3_min); - device_create_file(&new_client->dev, &dev_attr_in3_max); - device_create_file(&new_client->dev, &dev_attr_in4_input); - device_create_file(&new_client->dev, &dev_attr_in4_min); - device_create_file(&new_client->dev, &dev_attr_in4_max); - device_create_file(&new_client->dev, &dev_attr_in5_input); - device_create_file(&new_client->dev, &dev_attr_in5_min); - device_create_file(&new_client->dev, &dev_attr_in5_max); - device_create_file(&new_client->dev, &dev_attr_in6_input); - device_create_file(&new_client->dev, &dev_attr_in6_min); - device_create_file(&new_client->dev, &dev_attr_in6_max); - device_create_file(&new_client->dev, &dev_attr_temp1_input); - device_create_file(&new_client->dev, &dev_attr_temp1_max); - device_create_file(&new_client->dev, &dev_attr_temp1_max_hyst); - device_create_file(&new_client->dev, &dev_attr_fan1_input); - device_create_file(&new_client->dev, &dev_attr_fan1_min); - device_create_file(&new_client->dev, &dev_attr_fan1_div); - device_create_file(&new_client->dev, &dev_attr_fan2_input); - device_create_file(&new_client->dev, &dev_attr_fan2_min); - device_create_file(&new_client->dev, &dev_attr_fan2_div); - device_create_file(&new_client->dev, &dev_attr_fan3_input); - device_create_file(&new_client->dev, &dev_attr_fan3_min); - device_create_file(&new_client->dev, &dev_attr_fan3_div); - device_create_file(&new_client->dev, &dev_attr_alarms); - device_create_file(&new_client->dev, &dev_attr_cpu0_vid); - return 0; +ERROR4: + sysfs_remove_group(&new_client->dev.kobj, &lm78_group); ERROR3: i2c_detach_client(new_client); ERROR2: @@ -676,6 +690,7 @@ static int lm78_detach_client(struct i2c_client *client) int err; hwmon_device_unregister(data->class_dev); + sysfs_remove_group(&client->dev.kobj, &lm78_group); if ((err = i2c_detach_client(client))) return err; @@ -800,18 +815,18 @@ static int __init sm_lm78_init(void) if (res) return res; - res = i2c_isa_add_driver(&lm78_isa_driver); - if (res) { - i2c_del_driver(&lm78_driver); - return res; - } + /* Don't exit if this one fails, we still want the I2C variants + to work! */ + if (i2c_isa_add_driver(&lm78_isa_driver)) + isa_address = 0; return 0; } static void __exit sm_lm78_exit(void) { - i2c_isa_del_driver(&lm78_isa_driver); + if (isa_address) + i2c_isa_del_driver(&lm78_isa_driver); i2c_del_driver(&lm78_driver); } diff --git a/drivers/hwmon/lm80.c b/drivers/hwmon/lm80.c index b4ccdfc0120..064516d824a 100644 --- a/drivers/hwmon/lm80.c +++ b/drivers/hwmon/lm80.c @@ -394,6 +394,48 @@ static int lm80_attach_adapter(struct i2c_adapter *adapter) return i2c_probe(adapter, &addr_data, lm80_detect); } +static struct attribute *lm80_attributes[] = { + &dev_attr_in0_min.attr, + &dev_attr_in1_min.attr, + &dev_attr_in2_min.attr, + &dev_attr_in3_min.attr, + &dev_attr_in4_min.attr, + &dev_attr_in5_min.attr, + &dev_attr_in6_min.attr, + &dev_attr_in0_max.attr, + &dev_attr_in1_max.attr, + &dev_attr_in2_max.attr, + &dev_attr_in3_max.attr, + &dev_attr_in4_max.attr, + &dev_attr_in5_max.attr, + &dev_attr_in6_max.attr, + &dev_attr_in0_input.attr, + &dev_attr_in1_input.attr, + &dev_attr_in2_input.attr, + &dev_attr_in3_input.attr, + &dev_attr_in4_input.attr, + &dev_attr_in5_input.attr, + &dev_attr_in6_input.attr, + &dev_attr_fan1_min.attr, + &dev_attr_fan2_min.attr, + &dev_attr_fan1_input.attr, + &dev_attr_fan2_input.attr, + &dev_attr_fan1_div.attr, + &dev_attr_fan2_div.attr, + &dev_attr_temp1_input.attr, + &dev_attr_temp1_max.attr, + &dev_attr_temp1_max_hyst.attr, + &dev_attr_temp1_crit.attr, + &dev_attr_temp1_crit_hyst.attr, + &dev_attr_alarms.attr, + + NULL +}; + +static const struct attribute_group lm80_group = { + .attrs = lm80_attributes, +}; + static int lm80_detect(struct i2c_adapter *adapter, int address, int kind) { int i, cur; @@ -452,48 +494,19 @@ static int lm80_detect(struct i2c_adapter *adapter, int address, int kind) data->fan_min[1] = lm80_read_value(new_client, LM80_REG_FAN_MIN(2)); /* Register sysfs hooks */ + if ((err = sysfs_create_group(&new_client->dev.kobj, &lm80_group))) + goto error_detach; + data->class_dev = hwmon_device_register(&new_client->dev); if (IS_ERR(data->class_dev)) { err = PTR_ERR(data->class_dev); - goto error_detach; + goto error_remove; } - device_create_file(&new_client->dev, &dev_attr_in0_min); - device_create_file(&new_client->dev, &dev_attr_in1_min); - device_create_file(&new_client->dev, &dev_attr_in2_min); - device_create_file(&new_client->dev, &dev_attr_in3_min); - device_create_file(&new_client->dev, &dev_attr_in4_min); - device_create_file(&new_client->dev, &dev_attr_in5_min); - device_create_file(&new_client->dev, &dev_attr_in6_min); - device_create_file(&new_client->dev, &dev_attr_in0_max); - device_create_file(&new_client->dev, &dev_attr_in1_max); - device_create_file(&new_client->dev, &dev_attr_in2_max); - device_create_file(&new_client->dev, &dev_attr_in3_max); - device_create_file(&new_client->dev, &dev_attr_in4_max); - device_create_file(&new_client->dev, &dev_attr_in5_max); - device_create_file(&new_client->dev, &dev_attr_in6_max); - device_create_file(&new_client->dev, &dev_attr_in0_input); - device_create_file(&new_client->dev, &dev_attr_in1_input); - device_create_file(&new_client->dev, &dev_attr_in2_input); - device_create_file(&new_client->dev, &dev_attr_in3_input); - device_create_file(&new_client->dev, &dev_attr_in4_input); - device_create_file(&new_client->dev, &dev_attr_in5_input); - device_create_file(&new_client->dev, &dev_attr_in6_input); - device_create_file(&new_client->dev, &dev_attr_fan1_min); - device_create_file(&new_client->dev, &dev_attr_fan2_min); - device_create_file(&new_client->dev, &dev_attr_fan1_input); - device_create_file(&new_client->dev, &dev_attr_fan2_input); - device_create_file(&new_client->dev, &dev_attr_fan1_div); - device_create_file(&new_client->dev, &dev_attr_fan2_div); - device_create_file(&new_client->dev, &dev_attr_temp1_input); - device_create_file(&new_client->dev, &dev_attr_temp1_max); - device_create_file(&new_client->dev, &dev_attr_temp1_max_hyst); - device_create_file(&new_client->dev, &dev_attr_temp1_crit); - device_create_file(&new_client->dev, &dev_attr_temp1_crit_hyst); - device_create_file(&new_client->dev, &dev_attr_alarms); - return 0; +error_remove: + sysfs_remove_group(&new_client->dev.kobj, &lm80_group); error_detach: i2c_detach_client(new_client); error_free: @@ -508,7 +521,7 @@ static int lm80_detach_client(struct i2c_client *client) int err; hwmon_device_unregister(data->class_dev); - + sysfs_remove_group(&client->dev.kobj, &lm80_group); if ((err = i2c_detach_client(client))) return err; diff --git a/drivers/hwmon/lm83.c b/drivers/hwmon/lm83.c index 2137d7879df..feb87b41e98 100644 --- a/drivers/hwmon/lm83.c +++ b/drivers/hwmon/lm83.c @@ -1,7 +1,7 @@ /* * lm83.c - Part of lm_sensors, Linux kernel modules for hardware * monitoring - * Copyright (C) 2003-2005 Jean Delvare <khali@linux-fr.org> + * Copyright (C) 2003-2006 Jean Delvare <khali@linux-fr.org> * * Heavily inspired from the lm78, lm75 and adm1021 drivers. The LM83 is * a sensor chip made by National Semiconductor. It reports up to four @@ -40,6 +40,7 @@ #include <linux/hwmon.h> #include <linux/err.h> #include <linux/mutex.h> +#include <linux/sysfs.h> /* * Addresses to scan @@ -191,6 +192,16 @@ static ssize_t show_alarms(struct device *dev, struct device_attribute *dummy, return sprintf(buf, "%d\n", data->alarms); } +static ssize_t show_alarm(struct device *dev, struct device_attribute + *devattr, char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct lm83_data *data = lm83_update_device(dev); + int bitnr = attr->index; + + return sprintf(buf, "%d\n", (data->alarms >> bitnr) & 1); +} + static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0); static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 1); static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_temp, NULL, 2); @@ -208,8 +219,64 @@ static SENSOR_DEVICE_ATTR(temp2_crit, S_IRUGO, show_temp, NULL, 8); static SENSOR_DEVICE_ATTR(temp3_crit, S_IWUSR | S_IRUGO, show_temp, set_temp, 8); static SENSOR_DEVICE_ATTR(temp4_crit, S_IRUGO, show_temp, NULL, 8); + +/* Individual alarm files */ +static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, show_alarm, NULL, 0); +static SENSOR_DEVICE_ATTR(temp3_crit_alarm, S_IRUGO, show_alarm, NULL, 1); +static SENSOR_DEVICE_ATTR(temp3_input_fault, S_IRUGO, show_alarm, NULL, 2); +static SENSOR_DEVICE_ATTR(temp3_max_alarm, S_IRUGO, show_alarm, NULL, 4); +static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, show_alarm, NULL, 6); +static SENSOR_DEVICE_ATTR(temp2_crit_alarm, S_IRUGO, show_alarm, NULL, 8); +static SENSOR_DEVICE_ATTR(temp4_crit_alarm, S_IRUGO, show_alarm, NULL, 9); +static SENSOR_DEVICE_ATTR(temp4_input_fault, S_IRUGO, show_alarm, NULL, 10); +static SENSOR_DEVICE_ATTR(temp4_max_alarm, S_IRUGO, show_alarm, NULL, 12); +static SENSOR_DEVICE_ATTR(temp2_input_fault, S_IRUGO, show_alarm, NULL, 13); +static SENSOR_DEVICE_ATTR(temp2_max_alarm, S_IRUGO, show_alarm, NULL, 15); +/* Raw alarm file for compatibility */ static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); +static struct attribute *lm83_attributes[] = { + &sensor_dev_attr_temp1_input.dev_attr.attr, + &sensor_dev_attr_temp3_input.dev_attr.attr, + &sensor_dev_attr_temp1_max.dev_attr.attr, + &sensor_dev_attr_temp3_max.dev_attr.attr, + &sensor_dev_attr_temp1_crit.dev_attr.attr, + &sensor_dev_attr_temp3_crit.dev_attr.attr, + + &sensor_dev_attr_temp1_crit_alarm.dev_attr.attr, + &sensor_dev_attr_temp3_crit_alarm.dev_attr.attr, + &sensor_dev_attr_temp3_input_fault.dev_attr.attr, + &sensor_dev_attr_temp3_max_alarm.dev_attr.attr, + &sensor_dev_attr_temp1_max_alarm.dev_attr.attr, + &dev_attr_alarms.attr, + NULL +}; + +static const struct attribute_group lm83_group = { + .attrs = lm83_attributes, +}; + +static struct attribute *lm83_attributes_opt[] = { + &sensor_dev_attr_temp2_input.dev_attr.attr, + &sensor_dev_attr_temp4_input.dev_attr.attr, + &sensor_dev_attr_temp2_max.dev_attr.attr, + &sensor_dev_attr_temp4_max.dev_attr.attr, + &sensor_dev_attr_temp2_crit.dev_attr.attr, + &sensor_dev_attr_temp4_crit.dev_attr.attr, + + &sensor_dev_attr_temp2_crit_alarm.dev_attr.attr, + &sensor_dev_attr_temp4_crit_alarm.dev_attr.attr, + &sensor_dev_attr_temp4_input_fault.dev_attr.attr, + &sensor_dev_attr_temp4_max_alarm.dev_attr.attr, + &sensor_dev_attr_temp2_input_fault.dev_attr.attr, + &sensor_dev_attr_temp2_max_alarm.dev_attr.attr, + NULL +}; + +static const struct attribute_group lm83_group_opt = { + .attrs = lm83_attributes_opt, +}; + /* * Real code */ @@ -318,59 +385,32 @@ static int lm83_detect(struct i2c_adapter *adapter, int address, int kind) goto exit_free; /* - * Initialize the LM83 chip - * (Nothing to do for this one.) - */ - - /* Register sysfs hooks */ - data->class_dev = hwmon_device_register(&new_client->dev); - if (IS_ERR(data->class_dev)) { - err = PTR_ERR(data->class_dev); - goto exit_detach; - } - - /* + * Register sysfs hooks * The LM82 can only monitor one external diode which is * at the same register as the LM83 temp3 entry - so we * declare 1 and 3 common, and then 2 and 4 only for the LM83. */ - device_create_file(&new_client->dev, - &sensor_dev_attr_temp1_input.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_temp3_input.dev_attr); - - device_create_file(&new_client->dev, - &sensor_dev_attr_temp1_max.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_temp3_max.dev_attr); - - device_create_file(&new_client->dev, - &sensor_dev_attr_temp1_crit.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_temp3_crit.dev_attr); - - device_create_file(&new_client->dev, &dev_attr_alarms); + if ((err = sysfs_create_group(&new_client->dev.kobj, &lm83_group))) + goto exit_detach; if (kind == lm83) { - device_create_file(&new_client->dev, - &sensor_dev_attr_temp2_input.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_temp4_input.dev_attr); - - device_create_file(&new_client->dev, - &sensor_dev_attr_temp2_max.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_temp4_max.dev_attr); - - device_create_file(&new_client->dev, - &sensor_dev_attr_temp2_crit.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_temp4_crit.dev_attr); + if ((err = sysfs_create_group(&new_client->dev.kobj, + &lm83_group_opt))) + goto exit_remove_files; + } + + data->class_dev = hwmon_device_register(&new_client->dev); + if (IS_ERR(data->class_dev)) { + err = PTR_ERR(data->class_dev); + goto exit_remove_files; } return 0; +exit_remove_files: + sysfs_remove_group(&new_client->dev.kobj, &lm83_group); + sysfs_remove_group(&new_client->dev.kobj, &lm83_group_opt); exit_detach: i2c_detach_client(new_client); exit_free: @@ -385,6 +425,8 @@ static int lm83_detach_client(struct i2c_client *client) int err; hwmon_device_unregister(data->class_dev); + sysfs_remove_group(&client->dev.kobj, &lm83_group); + sysfs_remove_group(&client->dev.kobj, &lm83_group_opt); if ((err = i2c_detach_client(client))) return err; diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c index 342e9663119..2c3293cf69d 100644 --- a/drivers/hwmon/lm85.c +++ b/drivers/hwmon/lm85.c @@ -1025,6 +1025,89 @@ static int lm85_attach_adapter(struct i2c_adapter *adapter) return i2c_probe(adapter, &addr_data, lm85_detect); } +static struct attribute *lm85_attributes[] = { + &dev_attr_fan1_input.attr, + &dev_attr_fan2_input.attr, + &dev_attr_fan3_input.attr, + &dev_attr_fan4_input.attr, + &dev_attr_fan1_min.attr, + &dev_attr_fan2_min.attr, + &dev_attr_fan3_min.attr, + &dev_attr_fan4_min.attr, + &dev_attr_pwm1.attr, + &dev_attr_pwm2.attr, + &dev_attr_pwm3.attr, + &dev_attr_pwm1_enable.attr, + &dev_attr_pwm2_enable.attr, + &dev_attr_pwm3_enable.attr, + &dev_attr_in0_input.attr, + &dev_attr_in1_input.attr, + &dev_attr_in2_input.attr, + &dev_attr_in3_input.attr, + &dev_attr_in0_min.attr, + &dev_attr_in1_min.attr, + &dev_attr_in2_min.attr, + &dev_attr_in3_min.attr, + &dev_attr_in0_max.attr, + &dev_attr_in1_max.attr, + &dev_attr_in2_max.attr, + &dev_attr_in3_max.attr, + &dev_attr_temp1_input.attr, + &dev_attr_temp2_input.attr, + &dev_attr_temp3_input.attr, + &dev_attr_temp1_min.attr, + &dev_attr_temp2_min.attr, + &dev_attr_temp3_min.attr, + &dev_attr_temp1_max.attr, + &dev_attr_temp2_max.attr, + &dev_attr_temp3_max.attr, + &dev_attr_vrm.attr, + &dev_attr_cpu0_vid.attr, + &dev_attr_alarms.attr, + &dev_attr_pwm1_auto_channels.attr, + &dev_attr_pwm2_auto_channels.attr, + &dev_attr_pwm3_auto_channels.attr, + &dev_attr_pwm1_auto_pwm_min.attr, + &dev_attr_pwm2_auto_pwm_min.attr, + &dev_attr_pwm3_auto_pwm_min.attr, + &dev_attr_pwm1_auto_pwm_minctl.attr, + &dev_attr_pwm2_auto_pwm_minctl.attr, + &dev_attr_pwm3_auto_pwm_minctl.attr, + &dev_attr_pwm1_auto_pwm_freq.attr, + &dev_attr_pwm2_auto_pwm_freq.attr, + &dev_attr_pwm3_auto_pwm_freq.attr, + &dev_attr_temp1_auto_temp_off.attr, + &dev_attr_temp2_auto_temp_off.attr, + &dev_attr_temp3_auto_temp_off.attr, + &dev_attr_temp1_auto_temp_min.attr, + &dev_attr_temp2_auto_temp_min.attr, + &dev_attr_temp3_auto_temp_min.attr, + &dev_attr_temp1_auto_temp_max.attr, + &dev_attr_temp2_auto_temp_max.attr, + &dev_attr_temp3_auto_temp_max.attr, + &dev_attr_temp1_auto_temp_crit.attr, + &dev_attr_temp2_auto_temp_crit.attr, + &dev_attr_temp3_auto_temp_crit.attr, + + NULL +}; + +static const struct attribute_group lm85_group = { + .attrs = lm85_attributes, +}; + +static struct attribute *lm85_attributes_opt[] = { + &dev_attr_in4_input.attr, + &dev_attr_in4_min.attr, + &dev_attr_in4_max.attr, + + NULL +}; + +static const struct attribute_group lm85_group_opt = { + .attrs = lm85_attributes_opt, +}; + static int lm85_detect(struct i2c_adapter *adapter, int address, int kind) { @@ -1163,87 +1246,33 @@ static int lm85_detect(struct i2c_adapter *adapter, int address, lm85_init_client(new_client); /* Register sysfs hooks */ - data->class_dev = hwmon_device_register(&new_client->dev); - if (IS_ERR(data->class_dev)) { - err = PTR_ERR(data->class_dev); + if ((err = sysfs_create_group(&new_client->dev.kobj, &lm85_group))) goto ERROR2; - } - - device_create_file(&new_client->dev, &dev_attr_fan1_input); - device_create_file(&new_client->dev, &dev_attr_fan2_input); - device_create_file(&new_client->dev, &dev_attr_fan3_input); - device_create_file(&new_client->dev, &dev_attr_fan4_input); - device_create_file(&new_client->dev, &dev_attr_fan1_min); - device_create_file(&new_client->dev, &dev_attr_fan2_min); - device_create_file(&new_client->dev, &dev_attr_fan3_min); - device_create_file(&new_client->dev, &dev_attr_fan4_min); - device_create_file(&new_client->dev, &dev_attr_pwm1); - device_create_file(&new_client->dev, &dev_attr_pwm2); - device_create_file(&new_client->dev, &dev_attr_pwm3); - device_create_file(&new_client->dev, &dev_attr_pwm1_enable); - device_create_file(&new_client->dev, &dev_attr_pwm2_enable); - device_create_file(&new_client->dev, &dev_attr_pwm3_enable); - device_create_file(&new_client->dev, &dev_attr_in0_input); - device_create_file(&new_client->dev, &dev_attr_in1_input); - device_create_file(&new_client->dev, &dev_attr_in2_input); - device_create_file(&new_client->dev, &dev_attr_in3_input); - device_create_file(&new_client->dev, &dev_attr_in0_min); - device_create_file(&new_client->dev, &dev_attr_in1_min); - device_create_file(&new_client->dev, &dev_attr_in2_min); - device_create_file(&new_client->dev, &dev_attr_in3_min); - device_create_file(&new_client->dev, &dev_attr_in0_max); - device_create_file(&new_client->dev, &dev_attr_in1_max); - device_create_file(&new_client->dev, &dev_attr_in2_max); - device_create_file(&new_client->dev, &dev_attr_in3_max); - device_create_file(&new_client->dev, &dev_attr_temp1_input); - device_create_file(&new_client->dev, &dev_attr_temp2_input); - device_create_file(&new_client->dev, &dev_attr_temp3_input); - device_create_file(&new_client->dev, &dev_attr_temp1_min); - device_create_file(&new_client->dev, &dev_attr_temp2_min); - device_create_file(&new_client->dev, &dev_attr_temp3_min); - device_create_file(&new_client->dev, &dev_attr_temp1_max); - device_create_file(&new_client->dev, &dev_attr_temp2_max); - device_create_file(&new_client->dev, &dev_attr_temp3_max); - device_create_file(&new_client->dev, &dev_attr_vrm); - device_create_file(&new_client->dev, &dev_attr_cpu0_vid); - device_create_file(&new_client->dev, &dev_attr_alarms); - device_create_file(&new_client->dev, &dev_attr_pwm1_auto_channels); - device_create_file(&new_client->dev, &dev_attr_pwm2_auto_channels); - device_create_file(&new_client->dev, &dev_attr_pwm3_auto_channels); - device_create_file(&new_client->dev, &dev_attr_pwm1_auto_pwm_min); - device_create_file(&new_client->dev, &dev_attr_pwm2_auto_pwm_min); - device_create_file(&new_client->dev, &dev_attr_pwm3_auto_pwm_min); - device_create_file(&new_client->dev, &dev_attr_pwm1_auto_pwm_minctl); - device_create_file(&new_client->dev, &dev_attr_pwm2_auto_pwm_minctl); - device_create_file(&new_client->dev, &dev_attr_pwm3_auto_pwm_minctl); - device_create_file(&new_client->dev, &dev_attr_pwm1_auto_pwm_freq); - device_create_file(&new_client->dev, &dev_attr_pwm2_auto_pwm_freq); - device_create_file(&new_client->dev, &dev_attr_pwm3_auto_pwm_freq); - device_create_file(&new_client->dev, &dev_attr_temp1_auto_temp_off); - device_create_file(&new_client->dev, &dev_attr_temp2_auto_temp_off); - device_create_file(&new_client->dev, &dev_attr_temp3_auto_temp_off); - device_create_file(&new_client->dev, &dev_attr_temp1_auto_temp_min); - device_create_file(&new_client->dev, &dev_attr_temp2_auto_temp_min); - device_create_file(&new_client->dev, &dev_attr_temp3_auto_temp_min); - device_create_file(&new_client->dev, &dev_attr_temp1_auto_temp_max); - device_create_file(&new_client->dev, &dev_attr_temp2_auto_temp_max); - device_create_file(&new_client->dev, &dev_attr_temp3_auto_temp_max); - device_create_file(&new_client->dev, &dev_attr_temp1_auto_temp_crit); - device_create_file(&new_client->dev, &dev_attr_temp2_auto_temp_crit); - device_create_file(&new_client->dev, &dev_attr_temp3_auto_temp_crit); /* The ADT7463 has an optional VRM 10 mode where pin 21 is used as a sixth digital VID input rather than an analog input. */ data->vid = lm85_read_value(new_client, LM85_REG_VID); - if (!(kind == adt7463 && (data->vid & 0x80))) { - device_create_file(&new_client->dev, &dev_attr_in4_input); - device_create_file(&new_client->dev, &dev_attr_in4_min); - device_create_file(&new_client->dev, &dev_attr_in4_max); + if (!(kind == adt7463 && (data->vid & 0x80))) + if ((err = device_create_file(&new_client->dev, + &dev_attr_in4_input)) + || (err = device_create_file(&new_client->dev, + &dev_attr_in4_min)) + || (err = device_create_file(&new_client->dev, + &dev_attr_in4_max))) + goto ERROR3; + + data->class_dev = hwmon_device_register(&new_client->dev); + if (IS_ERR(data->class_dev)) { + err = PTR_ERR(data->class_dev); + goto ERROR3; } return 0; /* Error out and cleanup code */ + ERROR3: + sysfs_remove_group(&new_client->dev.kobj, &lm85_group); + sysfs_remove_group(&new_client->dev.kobj, &lm85_group_opt); ERROR2: i2c_detach_client(new_client); ERROR1: @@ -1256,6 +1285,8 @@ static int lm85_detach_client(struct i2c_client *client) { struct lm85_data *data = i2c_get_clientdata(client); hwmon_device_unregister(data->class_dev); + sysfs_remove_group(&client->dev.kobj, &lm85_group); + sysfs_remove_group(&client->dev.kobj, &lm85_group_opt); i2c_detach_client(client); kfree(data); return 0; diff --git a/drivers/hwmon/lm87.c b/drivers/hwmon/lm87.c index e6c1b638c97..3ce825489e3 100644 --- a/drivers/hwmon/lm87.c +++ b/drivers/hwmon/lm87.c @@ -542,6 +542,78 @@ static int lm87_attach_adapter(struct i2c_adapter *adapter) return i2c_probe(adapter, &addr_data, lm87_detect); } +static struct attribute *lm87_attributes[] = { + &dev_attr_in1_input.attr, + &dev_attr_in1_min.attr, + &dev_attr_in1_max.attr, + &dev_attr_in2_input.attr, + &dev_attr_in2_min.attr, + &dev_attr_in2_max.attr, + &dev_attr_in3_input.attr, + &dev_attr_in3_min.attr, + &dev_attr_in3_max.attr, + &dev_attr_in4_input.attr, + &dev_attr_in4_min.attr, + &dev_attr_in4_max.attr, + + &dev_attr_temp1_input.attr, + &dev_attr_temp1_max.attr, + &dev_attr_temp1_min.attr, + &dev_attr_temp1_crit.attr, + &dev_attr_temp2_input.attr, + &dev_attr_temp2_max.attr, + &dev_attr_temp2_min.attr, + &dev_attr_temp2_crit.attr, + + &dev_attr_alarms.attr, + &dev_attr_aout_output.attr, + + NULL +}; + +static const struct attribute_group lm87_group = { + .attrs = lm87_attributes, +}; + +static struct attribute *lm87_attributes_opt[] = { + &dev_attr_in6_input.attr, + &dev_attr_in6_min.attr, + &dev_attr_in6_max.attr, + + &dev_attr_fan1_input.attr, + &dev_attr_fan1_min.attr, + &dev_attr_fan1_div.attr, + + &dev_attr_in7_input.attr, + &dev_attr_in7_min.attr, + &dev_attr_in7_max.attr, + + &dev_attr_fan2_input.attr, + &dev_attr_fan2_min.attr, + &dev_attr_fan2_div.attr, + + &dev_attr_temp3_input.attr, + &dev_attr_temp3_max.attr, + &dev_attr_temp3_min.attr, + &dev_attr_temp3_crit.attr, + + &dev_attr_in0_input.attr, + &dev_attr_in0_min.attr, + &dev_attr_in0_max.attr, + &dev_attr_in5_input.attr, + &dev_attr_in5_min.attr, + &dev_attr_in5_max.attr, + + &dev_attr_cpu0_vid.attr, + &dev_attr_vrm.attr, + + NULL +}; + +static const struct attribute_group lm87_group_opt = { + .attrs = lm87_attributes_opt, +}; + /* * The following function does more than just detection. If detection * succeeds, it also registers the new chip. @@ -609,77 +681,90 @@ static int lm87_detect(struct i2c_adapter *adapter, int address, int kind) data->in_scale[7] = 1875; /* Register sysfs hooks */ - data->class_dev = hwmon_device_register(&new_client->dev); - if (IS_ERR(data->class_dev)) { - err = PTR_ERR(data->class_dev); + if ((err = sysfs_create_group(&new_client->dev.kobj, &lm87_group))) goto exit_detach; - } - - device_create_file(&new_client->dev, &dev_attr_in1_input); - device_create_file(&new_client->dev, &dev_attr_in1_min); - device_create_file(&new_client->dev, &dev_attr_in1_max); - device_create_file(&new_client->dev, &dev_attr_in2_input); - device_create_file(&new_client->dev, &dev_attr_in2_min); - device_create_file(&new_client->dev, &dev_attr_in2_max); - device_create_file(&new_client->dev, &dev_attr_in3_input); - device_create_file(&new_client->dev, &dev_attr_in3_min); - device_create_file(&new_client->dev, &dev_attr_in3_max); - device_create_file(&new_client->dev, &dev_attr_in4_input); - device_create_file(&new_client->dev, &dev_attr_in4_min); - device_create_file(&new_client->dev, &dev_attr_in4_max); if (data->channel & CHAN_NO_FAN(0)) { - device_create_file(&new_client->dev, &dev_attr_in6_input); - device_create_file(&new_client->dev, &dev_attr_in6_min); - device_create_file(&new_client->dev, &dev_attr_in6_max); + if ((err = device_create_file(&new_client->dev, + &dev_attr_in6_input)) + || (err = device_create_file(&new_client->dev, + &dev_attr_in6_min)) + || (err = device_create_file(&new_client->dev, + &dev_attr_in6_max))) + goto exit_remove; } else { - device_create_file(&new_client->dev, &dev_attr_fan1_input); - device_create_file(&new_client->dev, &dev_attr_fan1_min); - device_create_file(&new_client->dev, &dev_attr_fan1_div); + if ((err = device_create_file(&new_client->dev, + &dev_attr_fan1_input)) + || (err = device_create_file(&new_client->dev, + &dev_attr_fan1_min)) + || (err = device_create_file(&new_client->dev, + &dev_attr_fan1_div))) + goto exit_remove; } + if (data->channel & CHAN_NO_FAN(1)) { - device_create_file(&new_client->dev, &dev_attr_in7_input); - device_create_file(&new_client->dev, &dev_attr_in7_min); - device_create_file(&new_client->dev, &dev_attr_in7_max); + if ((err = device_create_file(&new_client->dev, + &dev_attr_in7_input)) + || (err = device_create_file(&new_client->dev, + &dev_attr_in7_min)) + || (err = device_create_file(&new_client->dev, + &dev_attr_in7_max))) + goto exit_remove; } else { - device_create_file(&new_client->dev, &dev_attr_fan2_input); - device_create_file(&new_client->dev, &dev_attr_fan2_min); - device_create_file(&new_client->dev, &dev_attr_fan2_div); + if ((err = device_create_file(&new_client->dev, + &dev_attr_fan2_input)) + || (err = device_create_file(&new_client->dev, + &dev_attr_fan2_min)) + || (err = device_create_file(&new_client->dev, + &dev_attr_fan2_div))) + goto exit_remove; } - device_create_file(&new_client->dev, &dev_attr_temp1_input); - device_create_file(&new_client->dev, &dev_attr_temp1_max); - device_create_file(&new_client->dev, &dev_attr_temp1_min); - device_create_file(&new_client->dev, &dev_attr_temp1_crit); - device_create_file(&new_client->dev, &dev_attr_temp2_input); - device_create_file(&new_client->dev, &dev_attr_temp2_max); - device_create_file(&new_client->dev, &dev_attr_temp2_min); - device_create_file(&new_client->dev, &dev_attr_temp2_crit); - if (data->channel & CHAN_TEMP3) { - device_create_file(&new_client->dev, &dev_attr_temp3_input); - device_create_file(&new_client->dev, &dev_attr_temp3_max); - device_create_file(&new_client->dev, &dev_attr_temp3_min); - device_create_file(&new_client->dev, &dev_attr_temp3_crit); + if ((err = device_create_file(&new_client->dev, + &dev_attr_temp3_input)) + || (err = device_create_file(&new_client->dev, + &dev_attr_temp3_max)) + || (err = device_create_file(&new_client->dev, + &dev_attr_temp3_min)) + || (err = device_create_file(&new_client->dev, + &dev_attr_temp3_crit))) + goto exit_remove; } else { - device_create_file(&new_client->dev, &dev_attr_in0_input); - device_create_file(&new_client->dev, &dev_attr_in0_min); - device_create_file(&new_client->dev, &dev_attr_in0_max); - device_create_file(&new_client->dev, &dev_attr_in5_input); - device_create_file(&new_client->dev, &dev_attr_in5_min); - device_create_file(&new_client->dev, &dev_attr_in5_max); + if ((err = device_create_file(&new_client->dev, + &dev_attr_in0_input)) + || (err = device_create_file(&new_client->dev, + &dev_attr_in0_min)) + || (err = device_create_file(&new_client->dev, + &dev_attr_in0_max)) + || (err = device_create_file(&new_client->dev, + &dev_attr_in5_input)) + || (err = device_create_file(&new_client->dev, + &dev_attr_in5_min)) + || (err = device_create_file(&new_client->dev, + &dev_attr_in5_max))) + goto exit_remove; } if (!(data->channel & CHAN_NO_VID)) { - device_create_file(&new_client->dev, &dev_attr_cpu0_vid); - device_create_file(&new_client->dev, &dev_attr_vrm); + if ((err = device_create_file(&new_client->dev, + &dev_attr_cpu0_vid)) + || (err = device_create_file(&new_client->dev, + &dev_attr_vrm))) + goto exit_remove; } - device_create_file(&new_client->dev, &dev_attr_alarms); - device_create_file(&new_client->dev, &dev_attr_aout_output); + data->class_dev = hwmon_device_register(&new_client->dev); + if (IS_ERR(data->class_dev)) { + err = PTR_ERR(data->class_dev); + goto exit_remove; + } return 0; +exit_remove: + sysfs_remove_group(&new_client->dev.kobj, &lm87_group); + sysfs_remove_group(&new_client->dev.kobj, &lm87_group_opt); exit_detach: i2c_detach_client(new_client); exit_free: @@ -732,6 +817,8 @@ static int lm87_detach_client(struct i2c_client *client) int err; hwmon_device_unregister(data->class_dev); + sysfs_remove_group(&client->dev.kobj, &lm87_group); + sysfs_remove_group(&client->dev.kobj, &lm87_group_opt); if ((err = i2c_detach_client(client))) return err; diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c index d9eeaf7585b..6882ce75fee 100644 --- a/drivers/hwmon/lm90.c +++ b/drivers/hwmon/lm90.c @@ -1,7 +1,7 @@ /* * lm90.c - Part of lm_sensors, Linux kernel modules for hardware * monitoring - * Copyright (C) 2003-2005 Jean Delvare <khali@linux-fr.org> + * Copyright (C) 2003-2006 Jean Delvare <khali@linux-fr.org> * * Based on the lm83 driver. The LM90 is a sensor chip made by National * Semiconductor. It reports up to two temperatures (its own plus up to @@ -79,6 +79,7 @@ #include <linux/hwmon.h> #include <linux/err.h> #include <linux/mutex.h> +#include <linux/sysfs.h> /* * Addresses to scan @@ -327,6 +328,16 @@ static ssize_t show_alarms(struct device *dev, struct device_attribute *dummy, return sprintf(buf, "%d\n", data->alarms); } +static ssize_t show_alarm(struct device *dev, struct device_attribute + *devattr, char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct lm90_data *data = lm90_update_device(dev); + int bitnr = attr->index; + + return sprintf(buf, "%d\n", (data->alarms >> bitnr) & 1); +} + static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp8, NULL, 0); static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp11, NULL, 0); static SENSOR_DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, show_temp8, @@ -344,8 +355,45 @@ static SENSOR_DEVICE_ATTR(temp2_crit, S_IWUSR | S_IRUGO, show_temp8, static SENSOR_DEVICE_ATTR(temp1_crit_hyst, S_IWUSR | S_IRUGO, show_temphyst, set_temphyst, 3); static SENSOR_DEVICE_ATTR(temp2_crit_hyst, S_IRUGO, show_temphyst, NULL, 4); + +/* Individual alarm files */ +static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, show_alarm, NULL, 0); +static SENSOR_DEVICE_ATTR(temp2_crit_alarm, S_IRUGO, show_alarm, NULL, 1); +static SENSOR_DEVICE_ATTR(temp2_input_fault, S_IRUGO, show_alarm, NULL, 2); +static SENSOR_DEVICE_ATTR(temp2_min_alarm, S_IRUGO, show_alarm, NULL, 3); +static SENSOR_DEVICE_ATTR(temp2_max_alarm, S_IRUGO, show_alarm, NULL, 4); +static SENSOR_DEVICE_ATTR(temp1_min_alarm, S_IRUGO, show_alarm, NULL, 5); +static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, show_alarm, NULL, 6); +/* Raw alarm file for compatibility */ static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); +static struct attribute *lm90_attributes[] = { + &sensor_dev_attr_temp1_input.dev_attr.attr, + &sensor_dev_attr_temp2_input.dev_attr.attr, + &sensor_dev_attr_temp1_min.dev_attr.attr, + &sensor_dev_attr_temp2_min.dev_attr.attr, + &sensor_dev_attr_temp1_max.dev_attr.attr, + &sensor_dev_attr_temp2_max.dev_attr.attr, + &sensor_dev_attr_temp1_crit.dev_attr.attr, + &sensor_dev_attr_temp2_crit.dev_attr.attr, + &sensor_dev_attr_temp1_crit_hyst.dev_attr.attr, + &sensor_dev_attr_temp2_crit_hyst.dev_attr.attr, + + &sensor_dev_attr_temp1_crit_alarm.dev_attr.attr, + &sensor_dev_attr_temp2_crit_alarm.dev_attr.attr, + &sensor_dev_attr_temp2_input_fault.dev_attr.attr, + &sensor_dev_attr_temp2_min_alarm.dev_attr.attr, + &sensor_dev_attr_temp2_max_alarm.dev_attr.attr, + &sensor_dev_attr_temp1_min_alarm.dev_attr.attr, + &sensor_dev_attr_temp1_max_alarm.dev_attr.attr, + &dev_attr_alarms.attr, + NULL +}; + +static const struct attribute_group lm90_group = { + .attrs = lm90_attributes, +}; + /* pec used for ADM1032 only */ static ssize_t show_pec(struct device *dev, struct device_attribute *dummy, char *buf) @@ -569,39 +617,25 @@ static int lm90_detect(struct i2c_adapter *adapter, int address, int kind) lm90_init_client(new_client); /* Register sysfs hooks */ + if ((err = sysfs_create_group(&new_client->dev.kobj, &lm90_group))) + goto exit_detach; + if (new_client->flags & I2C_CLIENT_PEC) { + if ((err = device_create_file(&new_client->dev, + &dev_attr_pec))) + goto exit_remove_files; + } + data->class_dev = hwmon_device_register(&new_client->dev); if (IS_ERR(data->class_dev)) { err = PTR_ERR(data->class_dev); - goto exit_detach; + goto exit_remove_files; } - device_create_file(&new_client->dev, - &sensor_dev_attr_temp1_input.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_temp2_input.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_temp1_min.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_temp2_min.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_temp1_max.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_temp2_max.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_temp1_crit.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_temp2_crit.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_temp1_crit_hyst.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_temp2_crit_hyst.dev_attr); - device_create_file(&new_client->dev, &dev_attr_alarms); - - if (new_client->flags & I2C_CLIENT_PEC) - device_create_file(&new_client->dev, &dev_attr_pec); - return 0; +exit_remove_files: + sysfs_remove_group(&new_client->dev.kobj, &lm90_group); + device_remove_file(&new_client->dev, &dev_attr_pec); exit_detach: i2c_detach_client(new_client); exit_free: @@ -634,6 +668,8 @@ static int lm90_detach_client(struct i2c_client *client) int err; hwmon_device_unregister(data->class_dev); + sysfs_remove_group(&client->dev.kobj, &lm90_group); + device_remove_file(&client->dev, &dev_attr_pec); if ((err = i2c_detach_client(client))) return err; diff --git a/drivers/hwmon/lm92.c b/drivers/hwmon/lm92.c index 197f77226dc..30b536333f1 100644 --- a/drivers/hwmon/lm92.c +++ b/drivers/hwmon/lm92.c @@ -288,6 +288,23 @@ static int max6635_check(struct i2c_client *client) return 1; } +static struct attribute *lm92_attributes[] = { + &dev_attr_temp1_input.attr, + &dev_attr_temp1_crit.attr, + &dev_attr_temp1_crit_hyst.attr, + &dev_attr_temp1_min.attr, + &dev_attr_temp1_min_hyst.attr, + &dev_attr_temp1_max.attr, + &dev_attr_temp1_max_hyst.attr, + &dev_attr_alarms.attr, + + NULL +}; + +static const struct attribute_group lm92_group = { + .attrs = lm92_attributes, +}; + /* The following function does more than just detection. If detection succeeds, it also registers the new chip. */ static int lm92_detect(struct i2c_adapter *adapter, int address, int kind) @@ -359,23 +376,19 @@ static int lm92_detect(struct i2c_adapter *adapter, int address, int kind) lm92_init_client(new_client); /* Register sysfs hooks */ + if ((err = sysfs_create_group(&new_client->dev.kobj, &lm92_group))) + goto exit_detach; + data->class_dev = hwmon_device_register(&new_client->dev); if (IS_ERR(data->class_dev)) { err = PTR_ERR(data->class_dev); - goto exit_detach; + goto exit_remove; } - device_create_file(&new_client->dev, &dev_attr_temp1_input); - device_create_file(&new_client->dev, &dev_attr_temp1_crit); - device_create_file(&new_client->dev, &dev_attr_temp1_crit_hyst); - device_create_file(&new_client->dev, &dev_attr_temp1_min); - device_create_file(&new_client->dev, &dev_attr_temp1_min_hyst); - device_create_file(&new_client->dev, &dev_attr_temp1_max); - device_create_file(&new_client->dev, &dev_attr_temp1_max_hyst); - device_create_file(&new_client->dev, &dev_attr_alarms); - return 0; +exit_remove: + sysfs_remove_group(&new_client->dev.kobj, &lm92_group); exit_detach: i2c_detach_client(new_client); exit_free: @@ -397,6 +410,7 @@ static int lm92_detach_client(struct i2c_client *client) int err; hwmon_device_unregister(data->class_dev); + sysfs_remove_group(&client->dev.kobj, &lm92_group); if ((err = i2c_detach_client(client))) return err; diff --git a/drivers/hwmon/max1619.c b/drivers/hwmon/max1619.c index b4135b5971f..2f58f651f03 100644 --- a/drivers/hwmon/max1619.c +++ b/drivers/hwmon/max1619.c @@ -34,6 +34,7 @@ #include <linux/hwmon.h> #include <linux/err.h> #include <linux/mutex.h> +#include <linux/sysfs.h> static unsigned short normal_i2c[] = { 0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b, @@ -172,6 +173,22 @@ static DEVICE_ATTR(temp2_crit_hyst, S_IWUSR | S_IRUGO, show_temp_hyst2, set_temp_hyst2); static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); +static struct attribute *max1619_attributes[] = { + &dev_attr_temp1_input.attr, + &dev_attr_temp2_input.attr, + &dev_attr_temp2_min.attr, + &dev_attr_temp2_max.attr, + &dev_attr_temp2_crit.attr, + &dev_attr_temp2_crit_hyst.attr, + + &dev_attr_alarms.attr, + NULL +}; + +static const struct attribute_group max1619_group = { + .attrs = max1619_attributes, +}; + /* * Real code */ @@ -273,22 +290,19 @@ static int max1619_detect(struct i2c_adapter *adapter, int address, int kind) max1619_init_client(new_client); /* Register sysfs hooks */ + if ((err = sysfs_create_group(&new_client->dev.kobj, &max1619_group))) + goto exit_detach; + data->class_dev = hwmon_device_register(&new_client->dev); if (IS_ERR(data->class_dev)) { err = PTR_ERR(data->class_dev); - goto exit_detach; + goto exit_remove_files; } - device_create_file(&new_client->dev, &dev_attr_temp1_input); - device_create_file(&new_client->dev, &dev_attr_temp2_input); - device_create_file(&new_client->dev, &dev_attr_temp2_min); - device_create_file(&new_client->dev, &dev_attr_temp2_max); - device_create_file(&new_client->dev, &dev_attr_temp2_crit); - device_create_file(&new_client->dev, &dev_attr_temp2_crit_hyst); - device_create_file(&new_client->dev, &dev_attr_alarms); - return 0; +exit_remove_files: + sysfs_remove_group(&new_client->dev.kobj, &max1619_group); exit_detach: i2c_detach_client(new_client); exit_free: @@ -318,6 +332,7 @@ static int max1619_detach_client(struct i2c_client *client) int err; hwmon_device_unregister(data->class_dev); + sysfs_remove_group(&client->dev.kobj, &max1619_group); if ((err = i2c_detach_client(client))) return err; diff --git a/drivers/hwmon/pc87360.c b/drivers/hwmon/pc87360.c index ae05e483a77..3b8b81984ad 100644 --- a/drivers/hwmon/pc87360.c +++ b/drivers/hwmon/pc87360.c @@ -238,6 +238,7 @@ static struct pc87360_data *pc87360_update_device(struct device *dev); static struct i2c_driver pc87360_driver = { .driver = { + .owner = THIS_MODULE, .name = "pc87360", }, .attach_adapter = pc87360_detect, @@ -327,6 +328,12 @@ static struct sensor_device_attribute fan_min[] = { SENSOR_ATTR(fan3_min, S_IWUSR | S_IRUGO, show_fan_min, set_fan_min, 2), }; +#define FAN_UNIT_ATTRS(X) \ + &fan_input[X].dev_attr.attr, \ + &fan_status[X].dev_attr.attr, \ + &fan_div[X].dev_attr.attr, \ + &fan_min[X].dev_attr.attr + static ssize_t show_pwm(struct device *dev, struct device_attribute *devattr, char *buf) { struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); @@ -359,6 +366,19 @@ static struct sensor_device_attribute pwm[] = { SENSOR_ATTR(pwm3, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 2), }; +static struct attribute * pc8736x_fan_attr_array[] = { + FAN_UNIT_ATTRS(0), + FAN_UNIT_ATTRS(1), + FAN_UNIT_ATTRS(2), + &pwm[0].dev_attr.attr, + &pwm[1].dev_attr.attr, + &pwm[2].dev_attr.attr, + NULL +}; +static const struct attribute_group pc8736x_fan_group = { + .attrs = pc8736x_fan_attr_array, +}; + static ssize_t show_in_input(struct device *dev, struct device_attribute *devattr, char *buf) { struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); @@ -471,6 +491,61 @@ static struct sensor_device_attribute in_max[] = { SENSOR_ATTR(in10_max, S_IWUSR | S_IRUGO, show_in_max, set_in_max, 10), }; +#define VIN_UNIT_ATTRS(X) \ + &in_input[X].dev_attr.attr, \ + &in_status[X].dev_attr.attr, \ + &in_min[X].dev_attr.attr, \ + &in_max[X].dev_attr.attr + +static ssize_t show_vid(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct pc87360_data *data = pc87360_update_device(dev); + return sprintf(buf, "%u\n", vid_from_reg(data->vid, data->vrm)); +} +static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid, NULL); + +static ssize_t show_vrm(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct pc87360_data *data = pc87360_update_device(dev); + return sprintf(buf, "%u\n", data->vrm); +} +static ssize_t set_vrm(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct pc87360_data *data = i2c_get_clientdata(client); + data->vrm = simple_strtoul(buf, NULL, 10); + return count; +} +static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm, set_vrm); + +static ssize_t show_in_alarms(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct pc87360_data *data = pc87360_update_device(dev); + return sprintf(buf, "%u\n", data->in_alarms); +} +static DEVICE_ATTR(alarms_in, S_IRUGO, show_in_alarms, NULL); + +static struct attribute *pc8736x_vin_attr_array[] = { + VIN_UNIT_ATTRS(0), + VIN_UNIT_ATTRS(1), + VIN_UNIT_ATTRS(2), + VIN_UNIT_ATTRS(3), + VIN_UNIT_ATTRS(4), + VIN_UNIT_ATTRS(5), + VIN_UNIT_ATTRS(6), + VIN_UNIT_ATTRS(7), + VIN_UNIT_ATTRS(8), + VIN_UNIT_ATTRS(9), + VIN_UNIT_ATTRS(10), + &dev_attr_cpu0_vid.attr, + &dev_attr_vrm.attr, + &dev_attr_alarms_in.attr, + NULL +}; +static const struct attribute_group pc8736x_vin_group = { + .attrs = pc8736x_vin_attr_array, +}; + static ssize_t show_therm_input(struct device *dev, struct device_attribute *devattr, char *buf) { struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); @@ -589,33 +664,22 @@ static struct sensor_device_attribute therm_crit[] = { show_therm_crit, set_therm_crit, 2+11), }; -static ssize_t show_vid(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct pc87360_data *data = pc87360_update_device(dev); - return sprintf(buf, "%u\n", vid_from_reg(data->vid, data->vrm)); -} -static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid, NULL); - -static ssize_t show_vrm(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct pc87360_data *data = pc87360_update_device(dev); - return sprintf(buf, "%u\n", data->vrm); -} -static ssize_t set_vrm(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - struct i2c_client *client = to_i2c_client(dev); - struct pc87360_data *data = i2c_get_clientdata(client); - data->vrm = simple_strtoul(buf, NULL, 10); - return count; -} -static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm, set_vrm); - -static ssize_t show_in_alarms(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct pc87360_data *data = pc87360_update_device(dev); - return sprintf(buf, "%u\n", data->in_alarms); -} -static DEVICE_ATTR(alarms_in, S_IRUGO, show_in_alarms, NULL); +#define THERM_UNIT_ATTRS(X) \ + &therm_input[X].dev_attr.attr, \ + &therm_status[X].dev_attr.attr, \ + &therm_min[X].dev_attr.attr, \ + &therm_max[X].dev_attr.attr, \ + &therm_crit[X].dev_attr.attr + +static struct attribute * pc8736x_therm_attr_array[] = { + THERM_UNIT_ATTRS(0), + THERM_UNIT_ATTRS(1), + THERM_UNIT_ATTRS(2), + NULL +}; +static const struct attribute_group pc8736x_therm_group = { + .attrs = pc8736x_therm_attr_array, +}; static ssize_t show_temp_input(struct device *dev, struct device_attribute *devattr, char *buf) { @@ -735,6 +799,25 @@ static ssize_t show_temp_alarms(struct device *dev, struct device_attribute *att } static DEVICE_ATTR(alarms_temp, S_IRUGO, show_temp_alarms, NULL); +#define TEMP_UNIT_ATTRS(X) \ + &temp_input[X].dev_attr.attr, \ + &temp_status[X].dev_attr.attr, \ + &temp_min[X].dev_attr.attr, \ + &temp_max[X].dev_attr.attr, \ + &temp_crit[X].dev_attr.attr + +static struct attribute * pc8736x_temp_attr_array[] = { + TEMP_UNIT_ATTRS(0), + TEMP_UNIT_ATTRS(1), + TEMP_UNIT_ATTRS(2), + /* include the few miscellaneous atts here */ + &dev_attr_alarms_temp.attr, + NULL +}; +static const struct attribute_group pc8736x_temp_group = { + .attrs = pc8736x_temp_attr_array, +}; + /* * Device detection, registration and update */ @@ -935,60 +1018,69 @@ static int pc87360_detect(struct i2c_adapter *adapter) pc87360_init_client(client, use_thermistors); } - /* Register sysfs hooks */ - data->class_dev = hwmon_device_register(&client->dev); - if (IS_ERR(data->class_dev)) { - err = PTR_ERR(data->class_dev); + /* Register all-or-nothing sysfs groups */ + + if (data->innr && + (err = sysfs_create_group(&client->dev.kobj, + &pc8736x_vin_group))) goto ERROR3; - } - if (data->innr) { - for (i = 0; i < 11; i++) { - device_create_file(dev, &in_input[i].dev_attr); - device_create_file(dev, &in_min[i].dev_attr); - device_create_file(dev, &in_max[i].dev_attr); - device_create_file(dev, &in_status[i].dev_attr); - } - device_create_file(dev, &dev_attr_cpu0_vid); - device_create_file(dev, &dev_attr_vrm); - device_create_file(dev, &dev_attr_alarms_in); - } + if (data->innr == 14 && + (err = sysfs_create_group(&client->dev.kobj, + &pc8736x_therm_group))) + goto ERROR3; + + /* create device attr-files for varying sysfs groups */ if (data->tempnr) { for (i = 0; i < data->tempnr; i++) { - device_create_file(dev, &temp_input[i].dev_attr); - device_create_file(dev, &temp_min[i].dev_attr); - device_create_file(dev, &temp_max[i].dev_attr); - device_create_file(dev, &temp_crit[i].dev_attr); - device_create_file(dev, &temp_status[i].dev_attr); - } - device_create_file(dev, &dev_attr_alarms_temp); - } - - if (data->innr == 14) { - for (i = 0; i < 3; i++) { - device_create_file(dev, &therm_input[i].dev_attr); - device_create_file(dev, &therm_min[i].dev_attr); - device_create_file(dev, &therm_max[i].dev_attr); - device_create_file(dev, &therm_crit[i].dev_attr); - device_create_file(dev, &therm_status[i].dev_attr); + if ((err = device_create_file(dev, + &temp_input[i].dev_attr)) + || (err = device_create_file(dev, + &temp_min[i].dev_attr)) + || (err = device_create_file(dev, + &temp_max[i].dev_attr)) + || (err = device_create_file(dev, + &temp_crit[i].dev_attr)) + || (err = device_create_file(dev, + &temp_status[i].dev_attr))) + goto ERROR3; } + if ((err = device_create_file(dev, &dev_attr_alarms_temp))) + goto ERROR3; } for (i = 0; i < data->fannr; i++) { - if (FAN_CONFIG_MONITOR(data->fan_conf, i)) { - device_create_file(dev, &fan_input[i].dev_attr); - device_create_file(dev, &fan_min[i].dev_attr); - device_create_file(dev, &fan_div[i].dev_attr); - device_create_file(dev, &fan_status[i].dev_attr); - } - if (FAN_CONFIG_CONTROL(data->fan_conf, i)) - device_create_file(dev, &pwm[i].dev_attr); + if (FAN_CONFIG_MONITOR(data->fan_conf, i) + && ((err = device_create_file(dev, + &fan_input[i].dev_attr)) + || (err = device_create_file(dev, + &fan_min[i].dev_attr)) + || (err = device_create_file(dev, + &fan_div[i].dev_attr)) + || (err = device_create_file(dev, + &fan_status[i].dev_attr)))) + goto ERROR3; + + if (FAN_CONFIG_CONTROL(data->fan_conf, i) + && (err = device_create_file(dev, &pwm[i].dev_attr))) + goto ERROR3; } + data->class_dev = hwmon_device_register(&client->dev); + if (IS_ERR(data->class_dev)) { + err = PTR_ERR(data->class_dev); + goto ERROR3; + } return 0; ERROR3: + /* can still remove groups whose members were added individually */ + sysfs_remove_group(&client->dev.kobj, &pc8736x_temp_group); + sysfs_remove_group(&client->dev.kobj, &pc8736x_fan_group); + sysfs_remove_group(&client->dev.kobj, &pc8736x_therm_group); + sysfs_remove_group(&client->dev.kobj, &pc8736x_vin_group); + i2c_detach_client(client); ERROR2: for (i = 0; i < 3; i++) { @@ -1008,6 +1100,11 @@ static int pc87360_detach_client(struct i2c_client *client) hwmon_device_unregister(data->class_dev); + sysfs_remove_group(&client->dev.kobj, &pc8736x_temp_group); + sysfs_remove_group(&client->dev.kobj, &pc8736x_fan_group); + sysfs_remove_group(&client->dev.kobj, &pc8736x_therm_group); + sysfs_remove_group(&client->dev.kobj, &pc8736x_vin_group); + if ((i = i2c_detach_client(client))) return i; diff --git a/drivers/hwmon/sis5595.c b/drivers/hwmon/sis5595.c index 063f71c5f07..95a4b5d9eaf 100644 --- a/drivers/hwmon/sis5595.c +++ b/drivers/hwmon/sis5595.c @@ -61,6 +61,7 @@ #include <linux/init.h> #include <linux/jiffies.h> #include <linux/mutex.h> +#include <linux/sysfs.h> #include <asm/io.h> @@ -200,6 +201,7 @@ static void sis5595_init_client(struct i2c_client *client); static struct i2c_driver sis5595_driver = { .driver = { + .owner = THIS_MODULE, .name = "sis5595", }, .attach_adapter = sis5595_detect, @@ -472,6 +474,50 @@ static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, ch return sprintf(buf, "%d\n", data->alarms); } static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); + +static struct attribute *sis5595_attributes[] = { + &dev_attr_in0_input.attr, + &dev_attr_in0_min.attr, + &dev_attr_in0_max.attr, + &dev_attr_in1_input.attr, + &dev_attr_in1_min.attr, + &dev_attr_in1_max.attr, + &dev_attr_in2_input.attr, + &dev_attr_in2_min.attr, + &dev_attr_in2_max.attr, + &dev_attr_in3_input.attr, + &dev_attr_in3_min.attr, + &dev_attr_in3_max.attr, + + &dev_attr_fan1_input.attr, + &dev_attr_fan1_min.attr, + &dev_attr_fan1_div.attr, + &dev_attr_fan2_input.attr, + &dev_attr_fan2_min.attr, + &dev_attr_fan2_div.attr, + + &dev_attr_alarms.attr, + NULL +}; + +static const struct attribute_group sis5595_group = { + .attrs = sis5595_attributes, +}; + +static struct attribute *sis5595_attributes_opt[] = { + &dev_attr_in4_input.attr, + &dev_attr_in4_min.attr, + &dev_attr_in4_max.attr, + + &dev_attr_temp1_input.attr, + &dev_attr_temp1_max.attr, + &dev_attr_temp1_max_hyst.attr, + NULL +}; + +static const struct attribute_group sis5595_group_opt = { + .attrs = sis5595_attributes_opt, +}; /* This is called when the module is loaded */ static int sis5595_detect(struct i2c_adapter *adapter) @@ -565,43 +611,37 @@ static int sis5595_detect(struct i2c_adapter *adapter) } /* Register sysfs hooks */ + if ((err = sysfs_create_group(&new_client->dev.kobj, &sis5595_group))) + goto exit_detach; + if (data->maxins == 4) { + if ((err = device_create_file(&new_client->dev, + &dev_attr_in4_input)) + || (err = device_create_file(&new_client->dev, + &dev_attr_in4_min)) + || (err = device_create_file(&new_client->dev, + &dev_attr_in4_max))) + goto exit_remove_files; + } else { + if ((err = device_create_file(&new_client->dev, + &dev_attr_temp1_input)) + || (err = device_create_file(&new_client->dev, + &dev_attr_temp1_max)) + || (err = device_create_file(&new_client->dev, + &dev_attr_temp1_max_hyst))) + goto exit_remove_files; + } + data->class_dev = hwmon_device_register(&new_client->dev); if (IS_ERR(data->class_dev)) { err = PTR_ERR(data->class_dev); - goto exit_detach; + goto exit_remove_files; } - device_create_file(&new_client->dev, &dev_attr_in0_input); - device_create_file(&new_client->dev, &dev_attr_in0_min); - device_create_file(&new_client->dev, &dev_attr_in0_max); - device_create_file(&new_client->dev, &dev_attr_in1_input); - device_create_file(&new_client->dev, &dev_attr_in1_min); - device_create_file(&new_client->dev, &dev_attr_in1_max); - device_create_file(&new_client->dev, &dev_attr_in2_input); - device_create_file(&new_client->dev, &dev_attr_in2_min); - device_create_file(&new_client->dev, &dev_attr_in2_max); - device_create_file(&new_client->dev, &dev_attr_in3_input); - device_create_file(&new_client->dev, &dev_attr_in3_min); - device_create_file(&new_client->dev, &dev_attr_in3_max); - if (data->maxins == 4) { - device_create_file(&new_client->dev, &dev_attr_in4_input); - device_create_file(&new_client->dev, &dev_attr_in4_min); - device_create_file(&new_client->dev, &dev_attr_in4_max); - } - device_create_file(&new_client->dev, &dev_attr_fan1_input); - device_create_file(&new_client->dev, &dev_attr_fan1_min); - device_create_file(&new_client->dev, &dev_attr_fan1_div); - device_create_file(&new_client->dev, &dev_attr_fan2_input); - device_create_file(&new_client->dev, &dev_attr_fan2_min); - device_create_file(&new_client->dev, &dev_attr_fan2_div); - device_create_file(&new_client->dev, &dev_attr_alarms); - if (data->maxins == 3) { - device_create_file(&new_client->dev, &dev_attr_temp1_input); - device_create_file(&new_client->dev, &dev_attr_temp1_max); - device_create_file(&new_client->dev, &dev_attr_temp1_max_hyst); - } return 0; +exit_remove_files: + sysfs_remove_group(&new_client->dev.kobj, &sis5595_group); + sysfs_remove_group(&new_client->dev.kobj, &sis5595_group_opt); exit_detach: i2c_detach_client(new_client); exit_free: @@ -618,6 +658,8 @@ static int sis5595_detach_client(struct i2c_client *client) int err; hwmon_device_unregister(data->class_dev); + sysfs_remove_group(&client->dev.kobj, &sis5595_group); + sysfs_remove_group(&client->dev.kobj, &sis5595_group_opt); if ((err = i2c_detach_client(client))) return err; diff --git a/drivers/hwmon/smsc47b397.c b/drivers/hwmon/smsc47b397.c index b6086186d22..72b0e2d8650 100644 --- a/drivers/hwmon/smsc47b397.c +++ b/drivers/hwmon/smsc47b397.c @@ -176,9 +176,6 @@ sysfs_temp(2); sysfs_temp(3); sysfs_temp(4); -#define device_create_file_temp(client, num) \ - device_create_file(&client->dev, &dev_attr_temp##num##_input) - /* FAN: 1 RPM/bit REG: count of 90kHz pulses / revolution */ static int fan_from_reg(u16 reg) @@ -205,8 +202,22 @@ sysfs_fan(2); sysfs_fan(3); sysfs_fan(4); -#define device_create_file_fan(client, num) \ - device_create_file(&client->dev, &dev_attr_fan##num##_input) +static struct attribute *smsc47b397_attributes[] = { + &dev_attr_temp1_input.attr, + &dev_attr_temp2_input.attr, + &dev_attr_temp3_input.attr, + &dev_attr_temp4_input.attr, + &dev_attr_fan1_input.attr, + &dev_attr_fan2_input.attr, + &dev_attr_fan3_input.attr, + &dev_attr_fan4_input.attr, + + NULL +}; + +static const struct attribute_group smsc47b397_group = { + .attrs = smsc47b397_attributes, +}; static int smsc47b397_detach_client(struct i2c_client *client) { @@ -214,6 +225,7 @@ static int smsc47b397_detach_client(struct i2c_client *client) int err; hwmon_device_unregister(data->class_dev); + sysfs_remove_group(&client->dev.kobj, &smsc47b397_group); if ((err = i2c_detach_client(client))) return err; @@ -228,6 +240,7 @@ static int smsc47b397_detect(struct i2c_adapter *adapter); static struct i2c_driver smsc47b397_driver = { .driver = { + .owner = THIS_MODULE, .name = "smsc47b397", }, .attach_adapter = smsc47b397_detect, @@ -267,24 +280,19 @@ static int smsc47b397_detect(struct i2c_adapter *adapter) if ((err = i2c_attach_client(new_client))) goto error_free; + if ((err = sysfs_create_group(&new_client->dev.kobj, &smsc47b397_group))) + goto error_detach; + data->class_dev = hwmon_device_register(&new_client->dev); if (IS_ERR(data->class_dev)) { err = PTR_ERR(data->class_dev); - goto error_detach; + goto error_remove; } - device_create_file_temp(new_client, 1); - device_create_file_temp(new_client, 2); - device_create_file_temp(new_client, 3); - device_create_file_temp(new_client, 4); - - device_create_file_fan(new_client, 1); - device_create_file_fan(new_client, 2); - device_create_file_fan(new_client, 3); - device_create_file_fan(new_client, 4); - return 0; +error_remove: + sysfs_remove_group(&new_client->dev.kobj, &smsc47b397_group); error_detach: i2c_detach_client(new_client); error_free: diff --git a/drivers/hwmon/smsc47m1.c b/drivers/hwmon/smsc47m1.c index 825e8f72698..beb881c4b2e 100644 --- a/drivers/hwmon/smsc47m1.c +++ b/drivers/hwmon/smsc47m1.c @@ -2,8 +2,8 @@ smsc47m1.c - Part of lm_sensors, Linux kernel modules for hardware monitoring - Supports the SMSC LPC47B27x, LPC47M10x, LPC47M13x, LPC47M14x, - LPC47M15x, LPC47M192 and LPC47M997 Super-I/O chips. + Supports the SMSC LPC47B27x, LPC47M10x, LPC47M112, LPC47M13x, + LPC47M14x, LPC47M15x, LPC47M192 and LPC47M997 Super-I/O chips. Copyright (C) 2002 Mark D. Studebaker <mdsxyz123@yahoo.com> Copyright (C) 2004 Jean Delvare <khali@linux-fr.org> @@ -35,6 +35,7 @@ #include <linux/err.h> #include <linux/init.h> #include <linux/mutex.h> +#include <linux/sysfs.h> #include <asm/io.h> /* Address is autodetected, there is no default value */ @@ -128,6 +129,7 @@ static struct smsc47m1_data *smsc47m1_update_device(struct device *dev, static struct i2c_driver smsc47m1_driver = { .driver = { + .owner = THIS_MODULE, .name = "smsc47m1", }, .attach_adapter = smsc47m1_detect, @@ -346,6 +348,30 @@ fan_present(2); static DEVICE_ATTR(alarms, S_IRUGO, get_alarms, NULL); +/* Almost all sysfs files may or may not be created depending on the chip + setup so we create them individually. It is still convenient to define a + group to remove them all at once. */ +static struct attribute *smsc47m1_attributes[] = { + &dev_attr_fan1_input.attr, + &dev_attr_fan1_min.attr, + &dev_attr_fan1_div.attr, + &dev_attr_fan2_input.attr, + &dev_attr_fan2_min.attr, + &dev_attr_fan2_div.attr, + + &dev_attr_pwm1.attr, + &dev_attr_pwm1_enable.attr, + &dev_attr_pwm2.attr, + &dev_attr_pwm2_enable.attr, + + &dev_attr_alarms.attr, + NULL +}; + +static const struct attribute_group smsc47m1_group = { + .attrs = smsc47m1_attributes, +}; + static int __init smsc47m1_find(unsigned short *addr) { u8 val; @@ -354,8 +380,8 @@ static int __init smsc47m1_find(unsigned short *addr) val = superio_inb(SUPERIO_REG_DEVID); /* - * SMSC LPC47M10x/LPC47M13x (device id 0x59), LPC47M14x (device id - * 0x5F) and LPC47B27x (device id 0x51) have fan control. + * SMSC LPC47M10x/LPC47M112/LPC47M13x (device id 0x59), LPC47M14x + * (device id 0x5F) and LPC47B27x (device id 0x51) have fan control. * The LPC47M15x and LPC47M192 chips "with hardware monitoring block" * can do much more besides (device id 0x60). * The LPC47M997 is undocumented, but seems to be compatible with @@ -364,7 +390,8 @@ static int __init smsc47m1_find(unsigned short *addr) if (val == 0x51) printk(KERN_INFO "smsc47m1: Found SMSC LPC47B27x\n"); else if (val == 0x59) - printk(KERN_INFO "smsc47m1: Found SMSC LPC47M10x/LPC47M13x\n"); + printk(KERN_INFO "smsc47m1: Found SMSC " + "LPC47M10x/LPC47M112/LPC47M13x\n"); else if (val == 0x5F) printk(KERN_INFO "smsc47m1: Found SMSC LPC47M14x\n"); else if (val == 0x60) @@ -428,7 +455,8 @@ static int smsc47m1_detect(struct i2c_adapter *adapter) pwm2 = (smsc47m1_read_value(new_client, SMSC47M1_REG_PPIN(1)) & 0x05) == 0x04; if (!(fan1 || fan2 || pwm1 || pwm2)) { - dev_warn(&new_client->dev, "Device is not configured, will not use\n"); + dev_warn(&adapter->dev, "Device at 0x%x is not configured, " + "will not use\n", new_client->addr); err = -ENODEV; goto error_free; } @@ -445,46 +473,62 @@ static int smsc47m1_detect(struct i2c_adapter *adapter) smsc47m1_update_device(&new_client->dev, 1); /* Register sysfs hooks */ - data->class_dev = hwmon_device_register(&new_client->dev); - if (IS_ERR(data->class_dev)) { - err = PTR_ERR(data->class_dev); - goto error_detach; - } - if (fan1) { - device_create_file(&new_client->dev, &dev_attr_fan1_input); - device_create_file(&new_client->dev, &dev_attr_fan1_min); - device_create_file(&new_client->dev, &dev_attr_fan1_div); + if ((err = device_create_file(&new_client->dev, + &dev_attr_fan1_input)) + || (err = device_create_file(&new_client->dev, + &dev_attr_fan1_min)) + || (err = device_create_file(&new_client->dev, + &dev_attr_fan1_div))) + goto error_remove_files; } else dev_dbg(&new_client->dev, "Fan 1 not enabled by hardware, " "skipping\n"); if (fan2) { - device_create_file(&new_client->dev, &dev_attr_fan2_input); - device_create_file(&new_client->dev, &dev_attr_fan2_min); - device_create_file(&new_client->dev, &dev_attr_fan2_div); + if ((err = device_create_file(&new_client->dev, + &dev_attr_fan2_input)) + || (err = device_create_file(&new_client->dev, + &dev_attr_fan2_min)) + || (err = device_create_file(&new_client->dev, + &dev_attr_fan2_div))) + goto error_remove_files; } else dev_dbg(&new_client->dev, "Fan 2 not enabled by hardware, " "skipping\n"); if (pwm1) { - device_create_file(&new_client->dev, &dev_attr_pwm1); - device_create_file(&new_client->dev, &dev_attr_pwm1_enable); + if ((err = device_create_file(&new_client->dev, + &dev_attr_pwm1)) + || (err = device_create_file(&new_client->dev, + &dev_attr_pwm1_enable))) + goto error_remove_files; } else dev_dbg(&new_client->dev, "PWM 1 not enabled by hardware, " "skipping\n"); if (pwm2) { - device_create_file(&new_client->dev, &dev_attr_pwm2); - device_create_file(&new_client->dev, &dev_attr_pwm2_enable); + if ((err = device_create_file(&new_client->dev, + &dev_attr_pwm2)) + || (err = device_create_file(&new_client->dev, + &dev_attr_pwm2_enable))) + goto error_remove_files; } else dev_dbg(&new_client->dev, "PWM 2 not enabled by hardware, " "skipping\n"); - device_create_file(&new_client->dev, &dev_attr_alarms); + if ((err = device_create_file(&new_client->dev, &dev_attr_alarms))) + goto error_remove_files; + + data->class_dev = hwmon_device_register(&new_client->dev); + if (IS_ERR(data->class_dev)) { + err = PTR_ERR(data->class_dev); + goto error_remove_files; + } return 0; -error_detach: +error_remove_files: + sysfs_remove_group(&new_client->dev.kobj, &smsc47m1_group); i2c_detach_client(new_client); error_free: kfree(data); @@ -499,6 +543,7 @@ static int smsc47m1_detach_client(struct i2c_client *client) int err; hwmon_device_unregister(data->class_dev); + sysfs_remove_group(&client->dev.kobj, &smsc47m1_group); if ((err = i2c_detach_client(client))) return err; diff --git a/drivers/hwmon/smsc47m192.c b/drivers/hwmon/smsc47m192.c index bdc4570acf9..a6833f43739 100644 --- a/drivers/hwmon/smsc47m192.c +++ b/drivers/hwmon/smsc47m192.c @@ -30,6 +30,7 @@ #include <linux/hwmon-sysfs.h> #include <linux/hwmon-vid.h> #include <linux/err.h> +#include <linux/sysfs.h> /* Addresses to scan */ static unsigned short normal_i2c[] = { 0x2c, 0x2d, I2C_CLIENT_END }; @@ -370,6 +371,75 @@ static SENSOR_DEVICE_ATTR(in5_alarm, S_IRUGO, show_alarm, NULL, 0x0200); static SENSOR_DEVICE_ATTR(in6_alarm, S_IRUGO, show_alarm, NULL, 0x0400); static SENSOR_DEVICE_ATTR(in7_alarm, S_IRUGO, show_alarm, NULL, 0x0800); +static struct attribute *smsc47m192_attributes[] = { + &sensor_dev_attr_in0_input.dev_attr.attr, + &sensor_dev_attr_in0_min.dev_attr.attr, + &sensor_dev_attr_in0_max.dev_attr.attr, + &sensor_dev_attr_in0_alarm.dev_attr.attr, + &sensor_dev_attr_in1_input.dev_attr.attr, + &sensor_dev_attr_in1_min.dev_attr.attr, + &sensor_dev_attr_in1_max.dev_attr.attr, + &sensor_dev_attr_in1_alarm.dev_attr.attr, + &sensor_dev_attr_in2_input.dev_attr.attr, + &sensor_dev_attr_in2_min.dev_attr.attr, + &sensor_dev_attr_in2_max.dev_attr.attr, + &sensor_dev_attr_in2_alarm.dev_attr.attr, + &sensor_dev_attr_in3_input.dev_attr.attr, + &sensor_dev_attr_in3_min.dev_attr.attr, + &sensor_dev_attr_in3_max.dev_attr.attr, + &sensor_dev_attr_in3_alarm.dev_attr.attr, + &sensor_dev_attr_in5_input.dev_attr.attr, + &sensor_dev_attr_in5_min.dev_attr.attr, + &sensor_dev_attr_in5_max.dev_attr.attr, + &sensor_dev_attr_in5_alarm.dev_attr.attr, + &sensor_dev_attr_in6_input.dev_attr.attr, + &sensor_dev_attr_in6_min.dev_attr.attr, + &sensor_dev_attr_in6_max.dev_attr.attr, + &sensor_dev_attr_in6_alarm.dev_attr.attr, + &sensor_dev_attr_in7_input.dev_attr.attr, + &sensor_dev_attr_in7_min.dev_attr.attr, + &sensor_dev_attr_in7_max.dev_attr.attr, + &sensor_dev_attr_in7_alarm.dev_attr.attr, + + &sensor_dev_attr_temp1_input.dev_attr.attr, + &sensor_dev_attr_temp1_max.dev_attr.attr, + &sensor_dev_attr_temp1_min.dev_attr.attr, + &sensor_dev_attr_temp1_offset.dev_attr.attr, + &sensor_dev_attr_temp1_alarm.dev_attr.attr, + &sensor_dev_attr_temp2_input.dev_attr.attr, + &sensor_dev_attr_temp2_max.dev_attr.attr, + &sensor_dev_attr_temp2_min.dev_attr.attr, + &sensor_dev_attr_temp2_offset.dev_attr.attr, + &sensor_dev_attr_temp2_alarm.dev_attr.attr, + &sensor_dev_attr_temp2_input_fault.dev_attr.attr, + &sensor_dev_attr_temp3_input.dev_attr.attr, + &sensor_dev_attr_temp3_max.dev_attr.attr, + &sensor_dev_attr_temp3_min.dev_attr.attr, + &sensor_dev_attr_temp3_offset.dev_attr.attr, + &sensor_dev_attr_temp3_alarm.dev_attr.attr, + &sensor_dev_attr_temp3_input_fault.dev_attr.attr, + + &dev_attr_cpu0_vid.attr, + &dev_attr_vrm.attr, + NULL +}; + +static const struct attribute_group smsc47m192_group = { + .attrs = smsc47m192_attributes, +}; + +static struct attribute *smsc47m192_attributes_in4[] = { + &sensor_dev_attr_in4_input.dev_attr.attr, + &sensor_dev_attr_in4_min.dev_attr.attr, + &sensor_dev_attr_in4_max.dev_attr.attr, + &sensor_dev_attr_in4_alarm.dev_attr.attr, + NULL +}; + +static const struct attribute_group smsc47m192_group_in4 = { + .attrs = smsc47m192_attributes_in4, +}; + /* This function is called when: * smsc47m192_driver is inserted (when this module is loaded), for each available adapter @@ -471,80 +541,28 @@ static int smsc47m192_detect(struct i2c_adapter *adapter, int address, smsc47m192_init_client(client); /* Register sysfs hooks */ - data->class_dev = hwmon_device_register(&client->dev); - if (IS_ERR(data->class_dev)) { - err = PTR_ERR(data->class_dev); + if ((err = sysfs_create_group(&client->dev.kobj, &smsc47m192_group))) goto exit_detach; - } - - device_create_file(&client->dev, &sensor_dev_attr_in0_input.dev_attr); - device_create_file(&client->dev, &sensor_dev_attr_in0_min.dev_attr); - device_create_file(&client->dev, &sensor_dev_attr_in0_max.dev_attr); - device_create_file(&client->dev, &sensor_dev_attr_in0_alarm.dev_attr); - device_create_file(&client->dev, &sensor_dev_attr_in1_input.dev_attr); - device_create_file(&client->dev, &sensor_dev_attr_in1_min.dev_attr); - device_create_file(&client->dev, &sensor_dev_attr_in1_max.dev_attr); - device_create_file(&client->dev, &sensor_dev_attr_in1_alarm.dev_attr); - device_create_file(&client->dev, &sensor_dev_attr_in2_input.dev_attr); - device_create_file(&client->dev, &sensor_dev_attr_in2_min.dev_attr); - device_create_file(&client->dev, &sensor_dev_attr_in2_max.dev_attr); - device_create_file(&client->dev, &sensor_dev_attr_in2_alarm.dev_attr); - device_create_file(&client->dev, &sensor_dev_attr_in3_input.dev_attr); - device_create_file(&client->dev, &sensor_dev_attr_in3_min.dev_attr); - device_create_file(&client->dev, &sensor_dev_attr_in3_max.dev_attr); - device_create_file(&client->dev, &sensor_dev_attr_in3_alarm.dev_attr); /* Pin 110 is either in4 (+12V) or VID4 */ config = i2c_smbus_read_byte_data(client, SMSC47M192_REG_CONFIG); if (!(config & 0x20)) { - device_create_file(&client->dev, - &sensor_dev_attr_in4_input.dev_attr); - device_create_file(&client->dev, - &sensor_dev_attr_in4_min.dev_attr); - device_create_file(&client->dev, - &sensor_dev_attr_in4_max.dev_attr); - device_create_file(&client->dev, - &sensor_dev_attr_in4_alarm.dev_attr); + if ((err = sysfs_create_group(&client->dev.kobj, + &smsc47m192_group_in4))) + goto exit_remove_files; + } + + data->class_dev = hwmon_device_register(&client->dev); + if (IS_ERR(data->class_dev)) { + err = PTR_ERR(data->class_dev); + goto exit_remove_files; } - device_create_file(&client->dev, &sensor_dev_attr_in5_input.dev_attr); - device_create_file(&client->dev, &sensor_dev_attr_in5_min.dev_attr); - device_create_file(&client->dev, &sensor_dev_attr_in5_max.dev_attr); - device_create_file(&client->dev, &sensor_dev_attr_in5_alarm.dev_attr); - device_create_file(&client->dev, &sensor_dev_attr_in6_input.dev_attr); - device_create_file(&client->dev, &sensor_dev_attr_in6_min.dev_attr); - device_create_file(&client->dev, &sensor_dev_attr_in6_max.dev_attr); - device_create_file(&client->dev, &sensor_dev_attr_in6_alarm.dev_attr); - device_create_file(&client->dev, &sensor_dev_attr_in7_input.dev_attr); - device_create_file(&client->dev, &sensor_dev_attr_in7_min.dev_attr); - device_create_file(&client->dev, &sensor_dev_attr_in7_max.dev_attr); - device_create_file(&client->dev, &sensor_dev_attr_in7_alarm.dev_attr); - device_create_file(&client->dev, &sensor_dev_attr_temp1_input.dev_attr); - device_create_file(&client->dev, &sensor_dev_attr_temp1_max.dev_attr); - device_create_file(&client->dev, &sensor_dev_attr_temp1_min.dev_attr); - device_create_file(&client->dev, - &sensor_dev_attr_temp1_offset.dev_attr); - device_create_file(&client->dev, &sensor_dev_attr_temp1_alarm.dev_attr); - device_create_file(&client->dev, &sensor_dev_attr_temp2_input.dev_attr); - device_create_file(&client->dev, &sensor_dev_attr_temp2_max.dev_attr); - device_create_file(&client->dev, &sensor_dev_attr_temp2_min.dev_attr); - device_create_file(&client->dev, - &sensor_dev_attr_temp2_offset.dev_attr); - device_create_file(&client->dev, &sensor_dev_attr_temp2_alarm.dev_attr); - device_create_file(&client->dev, - &sensor_dev_attr_temp2_input_fault.dev_attr); - device_create_file(&client->dev, &sensor_dev_attr_temp3_input.dev_attr); - device_create_file(&client->dev, &sensor_dev_attr_temp3_max.dev_attr); - device_create_file(&client->dev, &sensor_dev_attr_temp3_min.dev_attr); - device_create_file(&client->dev, - &sensor_dev_attr_temp3_offset.dev_attr); - device_create_file(&client->dev, &sensor_dev_attr_temp3_alarm.dev_attr); - device_create_file(&client->dev, - &sensor_dev_attr_temp3_input_fault.dev_attr); - device_create_file(&client->dev, &dev_attr_cpu0_vid); - device_create_file(&client->dev, &dev_attr_vrm); return 0; +exit_remove_files: + sysfs_remove_group(&client->dev.kobj, &smsc47m192_group); + sysfs_remove_group(&client->dev.kobj, &smsc47m192_group_in4); exit_detach: i2c_detach_client(client); exit_free: @@ -559,6 +577,8 @@ static int smsc47m192_detach_client(struct i2c_client *client) int err; hwmon_device_unregister(data->class_dev); + sysfs_remove_group(&client->dev.kobj, &smsc47m192_group); + sysfs_remove_group(&client->dev.kobj, &smsc47m192_group_in4); if ((err = i2c_detach_client(client))) return err; diff --git a/drivers/hwmon/via686a.c b/drivers/hwmon/via686a.c index 166298f1f19..f8acada0537 100644 --- a/drivers/hwmon/via686a.c +++ b/drivers/hwmon/via686a.c @@ -40,6 +40,7 @@ #include <linux/err.h> #include <linux/init.h> #include <linux/mutex.h> +#include <linux/sysfs.h> #include <asm/io.h> @@ -570,10 +571,53 @@ static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, ch } static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); +static struct attribute *via686a_attributes[] = { + &dev_attr_in0_input.attr, + &dev_attr_in1_input.attr, + &dev_attr_in2_input.attr, + &dev_attr_in3_input.attr, + &dev_attr_in4_input.attr, + &dev_attr_in0_min.attr, + &dev_attr_in1_min.attr, + &dev_attr_in2_min.attr, + &dev_attr_in3_min.attr, + &dev_attr_in4_min.attr, + &dev_attr_in0_max.attr, + &dev_attr_in1_max.attr, + &dev_attr_in2_max.attr, + &dev_attr_in3_max.attr, + &dev_attr_in4_max.attr, + + &dev_attr_temp1_input.attr, + &dev_attr_temp2_input.attr, + &dev_attr_temp3_input.attr, + &dev_attr_temp1_max.attr, + &dev_attr_temp2_max.attr, + &dev_attr_temp3_max.attr, + &dev_attr_temp1_max_hyst.attr, + &dev_attr_temp2_max_hyst.attr, + &dev_attr_temp3_max_hyst.attr, + + &dev_attr_fan1_input.attr, + &dev_attr_fan2_input.attr, + &dev_attr_fan1_min.attr, + &dev_attr_fan2_min.attr, + &dev_attr_fan1_div.attr, + &dev_attr_fan2_div.attr, + + &dev_attr_alarms.attr, + NULL +}; + +static const struct attribute_group via686a_group = { + .attrs = via686a_attributes, +}; + /* The driver. I choose to use type i2c_driver, as at is identical to both smbus_driver and isa_driver, and clients could be of either kind */ static struct i2c_driver via686a_driver = { .driver = { + .owner = THIS_MODULE, .name = "via686a", }, .attach_adapter = via686a_detect, @@ -649,46 +693,19 @@ static int via686a_detect(struct i2c_adapter *adapter) via686a_init_client(new_client); /* Register sysfs hooks */ + if ((err = sysfs_create_group(&new_client->dev.kobj, &via686a_group))) + goto exit_detach; + data->class_dev = hwmon_device_register(&new_client->dev); if (IS_ERR(data->class_dev)) { err = PTR_ERR(data->class_dev); - goto exit_detach; + goto exit_remove_files; } - device_create_file(&new_client->dev, &dev_attr_in0_input); - device_create_file(&new_client->dev, &dev_attr_in1_input); - device_create_file(&new_client->dev, &dev_attr_in2_input); - device_create_file(&new_client->dev, &dev_attr_in3_input); - device_create_file(&new_client->dev, &dev_attr_in4_input); - device_create_file(&new_client->dev, &dev_attr_in0_min); - device_create_file(&new_client->dev, &dev_attr_in1_min); - device_create_file(&new_client->dev, &dev_attr_in2_min); - device_create_file(&new_client->dev, &dev_attr_in3_min); - device_create_file(&new_client->dev, &dev_attr_in4_min); - device_create_file(&new_client->dev, &dev_attr_in0_max); - device_create_file(&new_client->dev, &dev_attr_in1_max); - device_create_file(&new_client->dev, &dev_attr_in2_max); - device_create_file(&new_client->dev, &dev_attr_in3_max); - device_create_file(&new_client->dev, &dev_attr_in4_max); - device_create_file(&new_client->dev, &dev_attr_temp1_input); - device_create_file(&new_client->dev, &dev_attr_temp2_input); - device_create_file(&new_client->dev, &dev_attr_temp3_input); - device_create_file(&new_client->dev, &dev_attr_temp1_max); - device_create_file(&new_client->dev, &dev_attr_temp2_max); - device_create_file(&new_client->dev, &dev_attr_temp3_max); - device_create_file(&new_client->dev, &dev_attr_temp1_max_hyst); - device_create_file(&new_client->dev, &dev_attr_temp2_max_hyst); - device_create_file(&new_client->dev, &dev_attr_temp3_max_hyst); - device_create_file(&new_client->dev, &dev_attr_fan1_input); - device_create_file(&new_client->dev, &dev_attr_fan2_input); - device_create_file(&new_client->dev, &dev_attr_fan1_min); - device_create_file(&new_client->dev, &dev_attr_fan2_min); - device_create_file(&new_client->dev, &dev_attr_fan1_div); - device_create_file(&new_client->dev, &dev_attr_fan2_div); - device_create_file(&new_client->dev, &dev_attr_alarms); - return 0; +exit_remove_files: + sysfs_remove_group(&new_client->dev.kobj, &via686a_group); exit_detach: i2c_detach_client(new_client); exit_free: @@ -704,6 +721,7 @@ static int via686a_detach_client(struct i2c_client *client) int err; hwmon_device_unregister(data->class_dev); + sysfs_remove_group(&client->dev.kobj, &via686a_group); if ((err = i2c_detach_client(client))) return err; diff --git a/drivers/hwmon/vt1211.c b/drivers/hwmon/vt1211.c new file mode 100644 index 00000000000..25cc56003d7 --- /dev/null +++ b/drivers/hwmon/vt1211.c @@ -0,0 +1,1355 @@ +/* + * vt1211.c - driver for the VIA VT1211 Super-I/O chip integrated hardware + * monitoring features + * Copyright (C) 2006 Juerg Haefliger <juergh@gmail.com> + * + * This driver is based on the driver for kernel 2.4 by Mark D. Studebaker + * and its port to kernel 2.6 by Lars Ekman. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/jiffies.h> +#include <linux/platform_device.h> +#include <linux/hwmon.h> +#include <linux/hwmon-sysfs.h> +#include <linux/hwmon-vid.h> +#include <linux/err.h> +#include <linux/mutex.h> +#include <asm/io.h> + +static int uch_config = -1; +module_param(uch_config, int, 0); +MODULE_PARM_DESC(uch_config, "Initialize the universal channel configuration"); + +static int int_mode = -1; +module_param(int_mode, int, 0); +MODULE_PARM_DESC(int_mode, "Force the temperature interrupt mode"); + +static struct platform_device *pdev; + +#define DRVNAME "vt1211" + +/* --------------------------------------------------------------------- + * Registers + * + * The sensors are defined as follows. + * + * Sensor Voltage Mode Temp Mode Notes (from the datasheet) + * -------- ------------ --------- -------------------------- + * Reading 1 temp1 Intel thermal diode + * Reading 3 temp2 Internal thermal diode + * UCH1/Reading2 in0 temp3 NTC type thermistor + * UCH2 in1 temp4 +2.5V + * UCH3 in2 temp5 VccP + * UCH4 in3 temp6 +5V + * UCH5 in4 temp7 +12V + * 3.3V in5 Internal VDD (+3.3V) + * + * --------------------------------------------------------------------- */ + +/* Voltages (in) numbered 0-5 (ix) */ +#define VT1211_REG_IN(ix) (0x21 + (ix)) +#define VT1211_REG_IN_MIN(ix) ((ix) == 0 ? 0x3e : 0x2a + 2 * (ix)) +#define VT1211_REG_IN_MAX(ix) ((ix) == 0 ? 0x3d : 0x29 + 2 * (ix)) + +/* Temperatures (temp) numbered 0-6 (ix) */ +static u8 regtemp[] = {0x1f, 0x20, 0x21, 0x22, 0x23, 0x24, 0x25}; +static u8 regtempmax[] = {0x39, 0x1d, 0x3d, 0x2b, 0x2d, 0x2f, 0x31}; +static u8 regtemphyst[] = {0x3a, 0x1e, 0x3e, 0x2c, 0x2e, 0x30, 0x32}; + +/* Fans numbered 0-1 (ix) */ +#define VT1211_REG_FAN(ix) (0x29 + (ix)) +#define VT1211_REG_FAN_MIN(ix) (0x3b + (ix)) +#define VT1211_REG_FAN_DIV 0x47 + +/* PWMs numbered 0-1 (ix) */ +/* Auto points numbered 0-3 (ap) */ +#define VT1211_REG_PWM(ix) (0x60 + (ix)) +#define VT1211_REG_PWM_CLK 0x50 +#define VT1211_REG_PWM_CTL 0x51 +#define VT1211_REG_PWM_AUTO_TEMP(ap) (0x55 - (ap)) +#define VT1211_REG_PWM_AUTO_PWM(ix, ap) (0x58 + 2 * (ix) - (ap)) + +/* Miscellaneous registers */ +#define VT1211_REG_CONFIG 0x40 +#define VT1211_REG_ALARM1 0x41 +#define VT1211_REG_ALARM2 0x42 +#define VT1211_REG_VID 0x45 +#define VT1211_REG_UCH_CONFIG 0x4a +#define VT1211_REG_TEMP1_CONFIG 0x4b +#define VT1211_REG_TEMP2_CONFIG 0x4c + +/* In, temp & fan alarm bits */ +static const u8 bitalarmin[] = {11, 0, 1, 3, 8, 2, 9}; +static const u8 bitalarmtemp[] = {4, 15, 11, 0, 1, 3, 8}; +static const u8 bitalarmfan[] = {6, 7}; + +/* --------------------------------------------------------------------- + * Data structures and manipulation thereof + * --------------------------------------------------------------------- */ + +struct vt1211_data { + unsigned short addr; + const char *name; + struct class_device *class_dev; + + struct mutex update_lock; + char valid; /* !=0 if following fields are valid */ + unsigned long last_updated; /* In jiffies */ + + /* Register values */ + u8 in[6]; + u8 in_max[6]; + u8 in_min[6]; + u8 temp[7]; + u8 temp_max[7]; + u8 temp_hyst[7]; + u8 fan[2]; + u8 fan_min[2]; + u8 fan_div[2]; + u8 fan_ctl; + u8 pwm[2]; + u8 pwm_ctl[2]; + u8 pwm_clk; + u8 pwm_auto_temp[4]; + u8 pwm_auto_pwm[2][4]; + u8 vid; /* Read once at init time */ + u8 vrm; + u8 uch_config; /* Read once at init time */ + u16 alarms; +}; + +/* ix = [0-5] */ +#define ISVOLT(ix, uch_config) ((ix) > 4 ? 1 : \ + !(((uch_config) >> ((ix) + 2)) & 1)) + +/* ix = [0-6] */ +#define ISTEMP(ix, uch_config) ((ix) < 2 ? 1 : \ + ((uch_config) >> (ix)) & 1) + +/* in5 (ix = 5) is special. It's the internal 3.3V so it's scaled in the + driver according to the VT1211 BIOS porting guide */ +#define IN_FROM_REG(ix, reg) ((reg) < 3 ? 0 : (ix) == 5 ? \ + (((reg) - 3) * 15882 + 479) / 958 : \ + (((reg) - 3) * 10000 + 479) / 958) +#define IN_TO_REG(ix, val) (SENSORS_LIMIT((ix) == 5 ? \ + ((val) * 958 + 7941) / 15882 + 3 : \ + ((val) * 958 + 5000) / 10000 + 3, 0, 255)) + +/* temp1 (ix = 0) is an intel thermal diode which is scaled in user space. + temp2 (ix = 1) is the internal temp diode so it's scaled in the driver + according to some measurements that I took on an EPIA M10000. + temp3-7 are thermistor based so the driver returns the voltage measured at + the pin (range 0V - 2.2V). */ +#define TEMP_FROM_REG(ix, reg) ((ix) == 0 ? (reg) * 1000 : \ + (ix) == 1 ? (reg) < 51 ? 0 : \ + ((reg) - 51) * 1000 : \ + ((253 - (reg)) * 2200 + 105) / 210) +#define TEMP_TO_REG(ix, val) SENSORS_LIMIT( \ + ((ix) == 0 ? ((val) + 500) / 1000 : \ + (ix) == 1 ? ((val) + 500) / 1000 + 51 : \ + 253 - ((val) * 210 + 1100) / 2200), 0, 255) + +#define DIV_FROM_REG(reg) (1 << (reg)) + +#define RPM_FROM_REG(reg, div) (((reg) == 0) || ((reg) == 255) ? 0 : \ + 1310720 / (reg) / DIV_FROM_REG(div)) +#define RPM_TO_REG(val, div) ((val) == 0 ? 255 : \ + SENSORS_LIMIT((1310720 / (val) / \ + DIV_FROM_REG(div)), 1, 254)) + +/* --------------------------------------------------------------------- + * Super-I/O constants and functions + * --------------------------------------------------------------------- */ + +/* Configuration & data index port registers */ +#define SIO_REG_CIP 0x2e +#define SIO_REG_DIP 0x2f + +/* Configuration registers */ +#define SIO_VT1211_LDN 0x07 /* logical device number */ +#define SIO_VT1211_DEVID 0x20 /* device ID */ +#define SIO_VT1211_DEVREV 0x21 /* device revision */ +#define SIO_VT1211_ACTIVE 0x30 /* HW monitor active */ +#define SIO_VT1211_BADDR 0x60 /* base I/O address */ +#define SIO_VT1211_ID 0x3c /* VT1211 device ID */ + +/* VT1211 logical device numbers */ +#define SIO_VT1211_LDN_HWMON 0x0b /* HW monitor */ + +static inline void superio_outb(int reg, int val) +{ + outb(reg, SIO_REG_CIP); + outb(val, SIO_REG_DIP); +} + +static inline int superio_inb(int reg) +{ + outb(reg, SIO_REG_CIP); + return inb(SIO_REG_DIP); +} + +static inline void superio_select(int ldn) +{ + outb(SIO_VT1211_LDN, SIO_REG_CIP); + outb(ldn, SIO_REG_DIP); +} + +static inline void superio_enter(void) +{ + outb(0x87, SIO_REG_CIP); + outb(0x87, SIO_REG_CIP); +} + +static inline void superio_exit(void) +{ + outb(0xaa, SIO_REG_CIP); +} + +/* --------------------------------------------------------------------- + * Device I/O access + * --------------------------------------------------------------------- */ + +static inline u8 vt1211_read8(struct vt1211_data *data, u8 reg) +{ + return inb(data->addr + reg); +} + +static inline void vt1211_write8(struct vt1211_data *data, u8 reg, u8 val) +{ + outb(val, data->addr + reg); +} + +static struct vt1211_data *vt1211_update_device(struct device *dev) +{ + struct vt1211_data *data = dev_get_drvdata(dev); + int ix, val; + + mutex_lock(&data->update_lock); + + /* registers cache is refreshed after 1 second */ + if (time_after(jiffies, data->last_updated + HZ) || !data->valid) { + /* read VID */ + data->vid = vt1211_read8(data, VT1211_REG_VID) & 0x1f; + + /* voltage (in) registers */ + for (ix = 0; ix < ARRAY_SIZE(data->in); ix++) { + if (ISVOLT(ix, data->uch_config)) { + data->in[ix] = vt1211_read8(data, + VT1211_REG_IN(ix)); + data->in_min[ix] = vt1211_read8(data, + VT1211_REG_IN_MIN(ix)); + data->in_max[ix] = vt1211_read8(data, + VT1211_REG_IN_MAX(ix)); + } + } + + /* temp registers */ + for (ix = 0; ix < ARRAY_SIZE(data->temp); ix++) { + if (ISTEMP(ix, data->uch_config)) { + data->temp[ix] = vt1211_read8(data, + regtemp[ix]); + data->temp_max[ix] = vt1211_read8(data, + regtempmax[ix]); + data->temp_hyst[ix] = vt1211_read8(data, + regtemphyst[ix]); + } + } + + /* fan & pwm registers */ + for (ix = 0; ix < ARRAY_SIZE(data->fan); ix++) { + data->fan[ix] = vt1211_read8(data, + VT1211_REG_FAN(ix)); + data->fan_min[ix] = vt1211_read8(data, + VT1211_REG_FAN_MIN(ix)); + data->pwm[ix] = vt1211_read8(data, + VT1211_REG_PWM(ix)); + } + val = vt1211_read8(data, VT1211_REG_FAN_DIV); + data->fan_div[0] = (val >> 4) & 3; + data->fan_div[1] = (val >> 6) & 3; + data->fan_ctl = val & 0xf; + + val = vt1211_read8(data, VT1211_REG_PWM_CTL); + data->pwm_ctl[0] = val & 0xf; + data->pwm_ctl[1] = (val >> 4) & 0xf; + + data->pwm_clk = vt1211_read8(data, VT1211_REG_PWM_CLK); + + /* pwm & temp auto point registers */ + data->pwm_auto_pwm[0][1] = vt1211_read8(data, + VT1211_REG_PWM_AUTO_PWM(0, 1)); + data->pwm_auto_pwm[0][2] = vt1211_read8(data, + VT1211_REG_PWM_AUTO_PWM(0, 2)); + data->pwm_auto_pwm[1][1] = vt1211_read8(data, + VT1211_REG_PWM_AUTO_PWM(1, 1)); + data->pwm_auto_pwm[1][2] = vt1211_read8(data, + VT1211_REG_PWM_AUTO_PWM(1, 2)); + for (ix = 0; ix < ARRAY_SIZE(data->pwm_auto_temp); ix++) { + data->pwm_auto_temp[ix] = vt1211_read8(data, + VT1211_REG_PWM_AUTO_TEMP(ix)); + } + + /* alarm registers */ + data->alarms = (vt1211_read8(data, VT1211_REG_ALARM2) << 8) | + vt1211_read8(data, VT1211_REG_ALARM1); + + data->last_updated = jiffies; + data->valid = 1; + } + + mutex_unlock(&data->update_lock); + + return data; +} + +/* --------------------------------------------------------------------- + * Voltage sysfs interfaces + * ix = [0-5] + * --------------------------------------------------------------------- */ + +#define SHOW_IN_INPUT 0 +#define SHOW_SET_IN_MIN 1 +#define SHOW_SET_IN_MAX 2 +#define SHOW_IN_ALARM 3 + +static ssize_t show_in(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct vt1211_data *data = vt1211_update_device(dev); + struct sensor_device_attribute_2 *sensor_attr_2 = + to_sensor_dev_attr_2(attr); + int ix = sensor_attr_2->index; + int fn = sensor_attr_2->nr; + int res; + + switch (fn) { + case SHOW_IN_INPUT: + res = IN_FROM_REG(ix, data->in[ix]); + break; + case SHOW_SET_IN_MIN: + res = IN_FROM_REG(ix, data->in_min[ix]); + break; + case SHOW_SET_IN_MAX: + res = IN_FROM_REG(ix, data->in_max[ix]); + break; + case SHOW_IN_ALARM: + res = (data->alarms >> bitalarmin[ix]) & 1; + break; + default: + res = 0; + dev_dbg(dev, "Unknown attr fetch (%d)\n", fn); + } + + return sprintf(buf, "%d\n", res); +} + +static ssize_t set_in(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct vt1211_data *data = dev_get_drvdata(dev); + struct sensor_device_attribute_2 *sensor_attr_2 = + to_sensor_dev_attr_2(attr); + int ix = sensor_attr_2->index; + int fn = sensor_attr_2->nr; + long val = simple_strtol(buf, NULL, 10); + + mutex_lock(&data->update_lock); + switch (fn) { + case SHOW_SET_IN_MIN: + data->in_min[ix] = IN_TO_REG(ix, val); + vt1211_write8(data, VT1211_REG_IN_MIN(ix), data->in_min[ix]); + break; + case SHOW_SET_IN_MAX: + data->in_max[ix] = IN_TO_REG(ix, val); + vt1211_write8(data, VT1211_REG_IN_MAX(ix), data->in_max[ix]); + break; + default: + dev_dbg(dev, "Unknown attr fetch (%d)\n", fn); + } + mutex_unlock(&data->update_lock); + + return count; +} + +/* --------------------------------------------------------------------- + * Temperature sysfs interfaces + * ix = [0-6] + * --------------------------------------------------------------------- */ + +#define SHOW_TEMP_INPUT 0 +#define SHOW_SET_TEMP_MAX 1 +#define SHOW_SET_TEMP_MAX_HYST 2 +#define SHOW_TEMP_ALARM 3 + +static ssize_t show_temp(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct vt1211_data *data = vt1211_update_device(dev); + struct sensor_device_attribute_2 *sensor_attr_2 = + to_sensor_dev_attr_2(attr); + int ix = sensor_attr_2->index; + int fn = sensor_attr_2->nr; + int res; + + switch (fn) { + case SHOW_TEMP_INPUT: + res = TEMP_FROM_REG(ix, data->temp[ix]); + break; + case SHOW_SET_TEMP_MAX: + res = TEMP_FROM_REG(ix, data->temp_max[ix]); + break; + case SHOW_SET_TEMP_MAX_HYST: + res = TEMP_FROM_REG(ix, data->temp_hyst[ix]); + break; + case SHOW_TEMP_ALARM: + res = (data->alarms >> bitalarmtemp[ix]) & 1; + break; + default: + res = 0; + dev_dbg(dev, "Unknown attr fetch (%d)\n", fn); + } + + return sprintf(buf, "%d\n", res); +} + +static ssize_t set_temp(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct vt1211_data *data = dev_get_drvdata(dev); + struct sensor_device_attribute_2 *sensor_attr_2 = + to_sensor_dev_attr_2(attr); + int ix = sensor_attr_2->index; + int fn = sensor_attr_2->nr; + long val = simple_strtol(buf, NULL, 10); + + mutex_lock(&data->update_lock); + switch (fn) { + case SHOW_SET_TEMP_MAX: + data->temp_max[ix] = TEMP_TO_REG(ix, val); + vt1211_write8(data, regtempmax[ix], + data->temp_max[ix]); + break; + case SHOW_SET_TEMP_MAX_HYST: + data->temp_hyst[ix] = TEMP_TO_REG(ix, val); + vt1211_write8(data, regtemphyst[ix], + data->temp_hyst[ix]); + break; + default: + dev_dbg(dev, "Unknown attr fetch (%d)\n", fn); + } + mutex_unlock(&data->update_lock); + + return count; +} + +/* --------------------------------------------------------------------- + * Fan sysfs interfaces + * ix = [0-1] + * --------------------------------------------------------------------- */ + +#define SHOW_FAN_INPUT 0 +#define SHOW_SET_FAN_MIN 1 +#define SHOW_SET_FAN_DIV 2 +#define SHOW_FAN_ALARM 3 + +static ssize_t show_fan(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct vt1211_data *data = vt1211_update_device(dev); + struct sensor_device_attribute_2 *sensor_attr_2 = + to_sensor_dev_attr_2(attr); + int ix = sensor_attr_2->index; + int fn = sensor_attr_2->nr; + int res; + + switch (fn) { + case SHOW_FAN_INPUT: + res = RPM_FROM_REG(data->fan[ix], data->fan_div[ix]); + break; + case SHOW_SET_FAN_MIN: + res = RPM_FROM_REG(data->fan_min[ix], data->fan_div[ix]); + break; + case SHOW_SET_FAN_DIV: + res = DIV_FROM_REG(data->fan_div[ix]); + break; + case SHOW_FAN_ALARM: + res = (data->alarms >> bitalarmfan[ix]) & 1; + break; + default: + res = 0; + dev_dbg(dev, "Unknown attr fetch (%d)\n", fn); + } + + return sprintf(buf, "%d\n", res); +} + +static ssize_t set_fan(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct vt1211_data *data = dev_get_drvdata(dev); + struct sensor_device_attribute_2 *sensor_attr_2 = + to_sensor_dev_attr_2(attr); + int ix = sensor_attr_2->index; + int fn = sensor_attr_2->nr; + long val = simple_strtol(buf, NULL, 10); + int reg; + + mutex_lock(&data->update_lock); + + /* sync the data cache */ + reg = vt1211_read8(data, VT1211_REG_FAN_DIV); + data->fan_div[0] = (reg >> 4) & 3; + data->fan_div[1] = (reg >> 6) & 3; + data->fan_ctl = reg & 0xf; + + switch (fn) { + case SHOW_SET_FAN_MIN: + data->fan_min[ix] = RPM_TO_REG(val, data->fan_div[ix]); + vt1211_write8(data, VT1211_REG_FAN_MIN(ix), + data->fan_min[ix]); + break; + case SHOW_SET_FAN_DIV: + switch (val) { + case 1: data->fan_div[ix] = 0; break; + case 2: data->fan_div[ix] = 1; break; + case 4: data->fan_div[ix] = 2; break; + case 8: data->fan_div[ix] = 3; break; + default: + count = -EINVAL; + dev_warn(dev, "fan div value %ld not " + "supported. Choose one of 1, 2, " + "4, or 8.\n", val); + goto EXIT; + } + vt1211_write8(data, VT1211_REG_FAN_DIV, + ((data->fan_div[1] << 6) | + (data->fan_div[0] << 4) | + data->fan_ctl)); + break; + default: + dev_dbg(dev, "Unknown attr fetch (%d)\n", fn); + } + +EXIT: + mutex_unlock(&data->update_lock); + return count; +} + +/* --------------------------------------------------------------------- + * PWM sysfs interfaces + * ix = [0-1] + * --------------------------------------------------------------------- */ + +#define SHOW_PWM 0 +#define SHOW_SET_PWM_ENABLE 1 +#define SHOW_SET_PWM_FREQ 2 +#define SHOW_SET_PWM_AUTO_CHANNELS_TEMP 3 + +static ssize_t show_pwm(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct vt1211_data *data = vt1211_update_device(dev); + struct sensor_device_attribute_2 *sensor_attr_2 = + to_sensor_dev_attr_2(attr); + int ix = sensor_attr_2->index; + int fn = sensor_attr_2->nr; + int res; + + switch (fn) { + case SHOW_PWM: + res = data->pwm[ix]; + break; + case SHOW_SET_PWM_ENABLE: + res = ((data->pwm_ctl[ix] >> 3) & 1) ? 2 : 0; + break; + case SHOW_SET_PWM_FREQ: + res = 90000 >> (data->pwm_clk & 7); + break; + case SHOW_SET_PWM_AUTO_CHANNELS_TEMP: + res = (data->pwm_ctl[ix] & 7) + 1; + break; + default: + res = 0; + dev_dbg(dev, "Unknown attr fetch (%d)\n", fn); + } + + return sprintf(buf, "%d\n", res); +} + +static ssize_t set_pwm(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct vt1211_data *data = dev_get_drvdata(dev); + struct sensor_device_attribute_2 *sensor_attr_2 = + to_sensor_dev_attr_2(attr); + int ix = sensor_attr_2->index; + int fn = sensor_attr_2->nr; + long val = simple_strtol(buf, NULL, 10); + int tmp, reg; + + mutex_lock(&data->update_lock); + + switch (fn) { + case SHOW_SET_PWM_ENABLE: + /* sync the data cache */ + reg = vt1211_read8(data, VT1211_REG_FAN_DIV); + data->fan_div[0] = (reg >> 4) & 3; + data->fan_div[1] = (reg >> 6) & 3; + data->fan_ctl = reg & 0xf; + reg = vt1211_read8(data, VT1211_REG_PWM_CTL); + data->pwm_ctl[0] = reg & 0xf; + data->pwm_ctl[1] = (reg >> 4) & 0xf; + switch (val) { + case 0: + data->pwm_ctl[ix] &= 7; + /* disable SmartGuardian if both PWM outputs are + * disabled */ + if ((data->pwm_ctl[ix ^ 1] & 1) == 0) { + data->fan_ctl &= 0xe; + } + break; + case 2: + data->pwm_ctl[ix] |= 8; + data->fan_ctl |= 1; + break; + default: + count = -EINVAL; + dev_warn(dev, "pwm mode %ld not supported. " + "Choose one of 0 or 2.\n", val); + goto EXIT; + } + vt1211_write8(data, VT1211_REG_PWM_CTL, + ((data->pwm_ctl[1] << 4) | + data->pwm_ctl[0])); + vt1211_write8(data, VT1211_REG_FAN_DIV, + ((data->fan_div[1] << 6) | + (data->fan_div[0] << 4) | + data->fan_ctl)); + break; + case SHOW_SET_PWM_FREQ: + val = 135000 / SENSORS_LIMIT(val, 135000 >> 7, 135000); + /* calculate tmp = log2(val) */ + tmp = 0; + for (val >>= 1; val > 0; val >>= 1) { + tmp++; + } + /* sync the data cache */ + reg = vt1211_read8(data, VT1211_REG_PWM_CLK); + data->pwm_clk = (reg & 0xf8) | tmp; + vt1211_write8(data, VT1211_REG_PWM_CLK, data->pwm_clk); + break; + case SHOW_SET_PWM_AUTO_CHANNELS_TEMP: + if ((val < 1) || (val > 7)) { + count = -EINVAL; + dev_warn(dev, "temp channel %ld not supported. " + "Choose a value between 1 and 7.\n", val); + goto EXIT; + } + if (!ISTEMP(val - 1, data->uch_config)) { + count = -EINVAL; + dev_warn(dev, "temp channel %ld is not available.\n", + val); + goto EXIT; + } + /* sync the data cache */ + reg = vt1211_read8(data, VT1211_REG_PWM_CTL); + data->pwm_ctl[0] = reg & 0xf; + data->pwm_ctl[1] = (reg >> 4) & 0xf; + data->pwm_ctl[ix] = (data->pwm_ctl[ix] & 8) | (val - 1); + vt1211_write8(data, VT1211_REG_PWM_CTL, + ((data->pwm_ctl[1] << 4) | data->pwm_ctl[0])); + break; + default: + dev_dbg(dev, "Unknown attr fetch (%d)\n", fn); + } + +EXIT: + mutex_unlock(&data->update_lock); + return count; +} + +/* --------------------------------------------------------------------- + * PWM auto point definitions + * ix = [0-1] + * ap = [0-3] + * --------------------------------------------------------------------- */ + +/* + * pwm[ix+1]_auto_point[ap+1]_temp mapping table: + * Note that there is only a single set of temp auto points that controls both + * PWM controllers. We still create 2 sets of sysfs files to make it look + * more consistent even though they map to the same registers. + * + * ix ap : description + * ------------------- + * 0 0 : pwm1/2 off temperature (pwm_auto_temp[0]) + * 0 1 : pwm1/2 low speed temperature (pwm_auto_temp[1]) + * 0 2 : pwm1/2 high speed temperature (pwm_auto_temp[2]) + * 0 3 : pwm1/2 full speed temperature (pwm_auto_temp[3]) + * 1 0 : pwm1/2 off temperature (pwm_auto_temp[0]) + * 1 1 : pwm1/2 low speed temperature (pwm_auto_temp[1]) + * 1 2 : pwm1/2 high speed temperature (pwm_auto_temp[2]) + * 1 3 : pwm1/2 full speed temperature (pwm_auto_temp[3]) + */ + +static ssize_t show_pwm_auto_point_temp(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct vt1211_data *data = vt1211_update_device(dev); + struct sensor_device_attribute_2 *sensor_attr_2 = + to_sensor_dev_attr_2(attr); + int ix = sensor_attr_2->index; + int ap = sensor_attr_2->nr; + + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->pwm_ctl[ix] & 7, + data->pwm_auto_temp[ap])); +} + +static ssize_t set_pwm_auto_point_temp(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct vt1211_data *data = dev_get_drvdata(dev); + struct sensor_device_attribute_2 *sensor_attr_2 = + to_sensor_dev_attr_2(attr); + int ix = sensor_attr_2->index; + int ap = sensor_attr_2->nr; + long val = simple_strtol(buf, NULL, 10); + int reg; + + mutex_lock(&data->update_lock); + + /* sync the data cache */ + reg = vt1211_read8(data, VT1211_REG_PWM_CTL); + data->pwm_ctl[0] = reg & 0xf; + data->pwm_ctl[1] = (reg >> 4) & 0xf; + + data->pwm_auto_temp[ap] = TEMP_TO_REG(data->pwm_ctl[ix] & 7, val); + vt1211_write8(data, VT1211_REG_PWM_AUTO_TEMP(ap), + data->pwm_auto_temp[ap]); + mutex_unlock(&data->update_lock); + + return count; +} + +/* + * pwm[ix+1]_auto_point[ap+1]_pwm mapping table: + * Note that the PWM auto points 0 & 3 are hard-wired in the VT1211 and can't + * be changed. + * + * ix ap : description + * ------------------- + * 0 0 : pwm1 off (pwm_auto_pwm[0][0], hard-wired to 0) + * 0 1 : pwm1 low speed duty cycle (pwm_auto_pwm[0][1]) + * 0 2 : pwm1 high speed duty cycle (pwm_auto_pwm[0][2]) + * 0 3 : pwm1 full speed (pwm_auto_pwm[0][3], hard-wired to 255) + * 1 0 : pwm2 off (pwm_auto_pwm[1][0], hard-wired to 0) + * 1 1 : pwm2 low speed duty cycle (pwm_auto_pwm[1][1]) + * 1 2 : pwm2 high speed duty cycle (pwm_auto_pwm[1][2]) + * 1 3 : pwm2 full speed (pwm_auto_pwm[1][3], hard-wired to 255) +*/ + +static ssize_t show_pwm_auto_point_pwm(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct vt1211_data *data = vt1211_update_device(dev); + struct sensor_device_attribute_2 *sensor_attr_2 = + to_sensor_dev_attr_2(attr); + int ix = sensor_attr_2->index; + int ap = sensor_attr_2->nr; + + return sprintf(buf, "%d\n", data->pwm_auto_pwm[ix][ap]); +} + +static ssize_t set_pwm_auto_point_pwm(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct vt1211_data *data = dev_get_drvdata(dev); + struct sensor_device_attribute_2 *sensor_attr_2 = + to_sensor_dev_attr_2(attr); + int ix = sensor_attr_2->index; + int ap = sensor_attr_2->nr; + long val = simple_strtol(buf, NULL, 10); + + if ((val < 0) || (val > 255)) { + dev_err(dev, "pwm value %ld is out of range. " + "Choose a value between 0 and 255." , val); + return -EINVAL; + } + + mutex_lock(&data->update_lock); + data->pwm_auto_pwm[ix][ap] = val; + vt1211_write8(data, VT1211_REG_PWM_AUTO_PWM(ix, ap), + data->pwm_auto_pwm[ix][ap]); + mutex_unlock(&data->update_lock); + + return count; +} + +/* --------------------------------------------------------------------- + * Miscellaneous sysfs interfaces (VRM, VID, name, and (legacy) alarms) + * --------------------------------------------------------------------- */ + +static ssize_t show_vrm(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct vt1211_data *data = dev_get_drvdata(dev); + + return sprintf(buf, "%d\n", data->vrm); +} + +static ssize_t set_vrm(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct vt1211_data *data = dev_get_drvdata(dev); + long val = simple_strtol(buf, NULL, 10); + + data->vrm = val; + + return count; +} + +static ssize_t show_vid(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct vt1211_data *data = dev_get_drvdata(dev); + + return sprintf(buf, "%d\n", vid_from_reg(data->vid, data->vrm)); +} + +static ssize_t show_name(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct vt1211_data *data = dev_get_drvdata(dev); + + return sprintf(buf, "%s\n", data->name); +} + +static ssize_t show_alarms(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct vt1211_data *data = vt1211_update_device(dev); + + return sprintf(buf, "%d\n", data->alarms); +} + +/* --------------------------------------------------------------------- + * Device attribute structs + * --------------------------------------------------------------------- */ + +#define SENSOR_ATTR_IN_INPUT(ix) \ + SENSOR_ATTR_2(in##ix##_input, S_IRUGO, \ + show_in, NULL, SHOW_IN_INPUT, ix) + +static struct sensor_device_attribute_2 vt1211_sysfs_in_input[] = { + SENSOR_ATTR_IN_INPUT(0), + SENSOR_ATTR_IN_INPUT(1), + SENSOR_ATTR_IN_INPUT(2), + SENSOR_ATTR_IN_INPUT(3), + SENSOR_ATTR_IN_INPUT(4), + SENSOR_ATTR_IN_INPUT(5), +}; + +#define SENSOR_ATTR_IN_MIN(ix) \ + SENSOR_ATTR_2(in##ix##_min, S_IRUGO | S_IWUSR, \ + show_in, set_in, SHOW_SET_IN_MIN, ix) + +static struct sensor_device_attribute_2 vt1211_sysfs_in_min[] = { + SENSOR_ATTR_IN_MIN(0), + SENSOR_ATTR_IN_MIN(1), + SENSOR_ATTR_IN_MIN(2), + SENSOR_ATTR_IN_MIN(3), + SENSOR_ATTR_IN_MIN(4), + SENSOR_ATTR_IN_MIN(5), +}; + +#define SENSOR_ATTR_IN_MAX(ix) \ + SENSOR_ATTR_2(in##ix##_max, S_IRUGO | S_IWUSR, \ + show_in, set_in, SHOW_SET_IN_MAX, ix) + +static struct sensor_device_attribute_2 vt1211_sysfs_in_max[] = { + SENSOR_ATTR_IN_MAX(0), + SENSOR_ATTR_IN_MAX(1), + SENSOR_ATTR_IN_MAX(2), + SENSOR_ATTR_IN_MAX(3), + SENSOR_ATTR_IN_MAX(4), + SENSOR_ATTR_IN_MAX(5), +}; + +#define SENSOR_ATTR_IN_ALARM(ix) \ + SENSOR_ATTR_2(in##ix##_alarm, S_IRUGO, \ + show_in, NULL, SHOW_IN_ALARM, ix) + +static struct sensor_device_attribute_2 vt1211_sysfs_in_alarm[] = { + SENSOR_ATTR_IN_ALARM(0), + SENSOR_ATTR_IN_ALARM(1), + SENSOR_ATTR_IN_ALARM(2), + SENSOR_ATTR_IN_ALARM(3), + SENSOR_ATTR_IN_ALARM(4), + SENSOR_ATTR_IN_ALARM(5), +}; + +#define SENSOR_ATTR_TEMP_INPUT(ix) \ + SENSOR_ATTR_2(temp##ix##_input, S_IRUGO, \ + show_temp, NULL, SHOW_TEMP_INPUT, ix-1) + +static struct sensor_device_attribute_2 vt1211_sysfs_temp_input[] = { + SENSOR_ATTR_TEMP_INPUT(1), + SENSOR_ATTR_TEMP_INPUT(2), + SENSOR_ATTR_TEMP_INPUT(3), + SENSOR_ATTR_TEMP_INPUT(4), + SENSOR_ATTR_TEMP_INPUT(5), + SENSOR_ATTR_TEMP_INPUT(6), + SENSOR_ATTR_TEMP_INPUT(7), +}; + +#define SENSOR_ATTR_TEMP_MAX(ix) \ + SENSOR_ATTR_2(temp##ix##_max, S_IRUGO | S_IWUSR, \ + show_temp, set_temp, SHOW_SET_TEMP_MAX, ix-1) + +static struct sensor_device_attribute_2 vt1211_sysfs_temp_max[] = { + SENSOR_ATTR_TEMP_MAX(1), + SENSOR_ATTR_TEMP_MAX(2), + SENSOR_ATTR_TEMP_MAX(3), + SENSOR_ATTR_TEMP_MAX(4), + SENSOR_ATTR_TEMP_MAX(5), + SENSOR_ATTR_TEMP_MAX(6), + SENSOR_ATTR_TEMP_MAX(7), +}; + +#define SENSOR_ATTR_TEMP_MAX_HYST(ix) \ + SENSOR_ATTR_2(temp##ix##_max_hyst, S_IRUGO | S_IWUSR, \ + show_temp, set_temp, SHOW_SET_TEMP_MAX_HYST, ix-1) + +static struct sensor_device_attribute_2 vt1211_sysfs_temp_max_hyst[] = { + SENSOR_ATTR_TEMP_MAX_HYST(1), + SENSOR_ATTR_TEMP_MAX_HYST(2), + SENSOR_ATTR_TEMP_MAX_HYST(3), + SENSOR_ATTR_TEMP_MAX_HYST(4), + SENSOR_ATTR_TEMP_MAX_HYST(5), + SENSOR_ATTR_TEMP_MAX_HYST(6), + SENSOR_ATTR_TEMP_MAX_HYST(7), +}; + +#define SENSOR_ATTR_TEMP_ALARM(ix) \ + SENSOR_ATTR_2(temp##ix##_alarm, S_IRUGO, \ + show_temp, NULL, SHOW_TEMP_ALARM, ix-1) + +static struct sensor_device_attribute_2 vt1211_sysfs_temp_alarm[] = { + SENSOR_ATTR_TEMP_ALARM(1), + SENSOR_ATTR_TEMP_ALARM(2), + SENSOR_ATTR_TEMP_ALARM(3), + SENSOR_ATTR_TEMP_ALARM(4), + SENSOR_ATTR_TEMP_ALARM(5), + SENSOR_ATTR_TEMP_ALARM(6), + SENSOR_ATTR_TEMP_ALARM(7), +}; + +#define SENSOR_ATTR_FAN(ix) \ + SENSOR_ATTR_2(fan##ix##_input, S_IRUGO, \ + show_fan, NULL, SHOW_FAN_INPUT, ix-1), \ + SENSOR_ATTR_2(fan##ix##_min, S_IRUGO | S_IWUSR, \ + show_fan, set_fan, SHOW_SET_FAN_MIN, ix-1), \ + SENSOR_ATTR_2(fan##ix##_div, S_IRUGO | S_IWUSR, \ + show_fan, set_fan, SHOW_SET_FAN_DIV, ix-1), \ + SENSOR_ATTR_2(fan##ix##_alarm, S_IRUGO, \ + show_fan, NULL, SHOW_FAN_ALARM, ix-1) + +#define SENSOR_ATTR_PWM(ix) \ + SENSOR_ATTR_2(pwm##ix, S_IRUGO, \ + show_pwm, NULL, SHOW_PWM, ix-1), \ + SENSOR_ATTR_2(pwm##ix##_enable, S_IRUGO | S_IWUSR, \ + show_pwm, set_pwm, SHOW_SET_PWM_ENABLE, ix-1), \ + SENSOR_ATTR_2(pwm##ix##_auto_channels_temp, S_IRUGO | S_IWUSR, \ + show_pwm, set_pwm, SHOW_SET_PWM_AUTO_CHANNELS_TEMP, ix-1) + +#define SENSOR_ATTR_PWM_FREQ(ix) \ + SENSOR_ATTR_2(pwm##ix##_freq, S_IRUGO | S_IWUSR, \ + show_pwm, set_pwm, SHOW_SET_PWM_FREQ, ix-1) + +#define SENSOR_ATTR_PWM_FREQ_RO(ix) \ + SENSOR_ATTR_2(pwm##ix##_freq, S_IRUGO, \ + show_pwm, NULL, SHOW_SET_PWM_FREQ, ix-1) + +#define SENSOR_ATTR_PWM_AUTO_POINT_TEMP(ix, ap) \ + SENSOR_ATTR_2(pwm##ix##_auto_point##ap##_temp, S_IRUGO | S_IWUSR, \ + show_pwm_auto_point_temp, set_pwm_auto_point_temp, \ + ap-1, ix-1) + +#define SENSOR_ATTR_PWM_AUTO_POINT_TEMP_RO(ix, ap) \ + SENSOR_ATTR_2(pwm##ix##_auto_point##ap##_temp, S_IRUGO, \ + show_pwm_auto_point_temp, NULL, \ + ap-1, ix-1) + +#define SENSOR_ATTR_PWM_AUTO_POINT_PWM(ix, ap) \ + SENSOR_ATTR_2(pwm##ix##_auto_point##ap##_pwm, S_IRUGO | S_IWUSR, \ + show_pwm_auto_point_pwm, set_pwm_auto_point_pwm, \ + ap-1, ix-1) + +#define SENSOR_ATTR_PWM_AUTO_POINT_PWM_RO(ix, ap) \ + SENSOR_ATTR_2(pwm##ix##_auto_point##ap##_pwm, S_IRUGO, \ + show_pwm_auto_point_pwm, NULL, \ + ap-1, ix-1) + +static struct sensor_device_attribute_2 vt1211_sysfs_fan_pwm[] = { + SENSOR_ATTR_FAN(1), + SENSOR_ATTR_FAN(2), + SENSOR_ATTR_PWM(1), + SENSOR_ATTR_PWM(2), + SENSOR_ATTR_PWM_FREQ(1), + SENSOR_ATTR_PWM_FREQ_RO(2), + SENSOR_ATTR_PWM_AUTO_POINT_TEMP(1, 1), + SENSOR_ATTR_PWM_AUTO_POINT_TEMP(1, 2), + SENSOR_ATTR_PWM_AUTO_POINT_TEMP(1, 3), + SENSOR_ATTR_PWM_AUTO_POINT_TEMP(1, 4), + SENSOR_ATTR_PWM_AUTO_POINT_TEMP_RO(2, 1), + SENSOR_ATTR_PWM_AUTO_POINT_TEMP_RO(2, 2), + SENSOR_ATTR_PWM_AUTO_POINT_TEMP_RO(2, 3), + SENSOR_ATTR_PWM_AUTO_POINT_TEMP_RO(2, 4), + SENSOR_ATTR_PWM_AUTO_POINT_PWM_RO(1, 1), + SENSOR_ATTR_PWM_AUTO_POINT_PWM(1, 2), + SENSOR_ATTR_PWM_AUTO_POINT_PWM(1, 3), + SENSOR_ATTR_PWM_AUTO_POINT_PWM_RO(1, 4), + SENSOR_ATTR_PWM_AUTO_POINT_PWM_RO(2, 1), + SENSOR_ATTR_PWM_AUTO_POINT_PWM(2, 2), + SENSOR_ATTR_PWM_AUTO_POINT_PWM(2, 3), + SENSOR_ATTR_PWM_AUTO_POINT_PWM_RO(2, 4), +}; + +static struct device_attribute vt1211_sysfs_misc[] = { + __ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm, set_vrm), + __ATTR(cpu0_vid, S_IRUGO, show_vid, NULL), + __ATTR(name, S_IRUGO, show_name, NULL), + __ATTR(alarms, S_IRUGO, show_alarms, NULL), +}; + +/* --------------------------------------------------------------------- + * Device registration and initialization + * --------------------------------------------------------------------- */ + +static void __devinit vt1211_init_device(struct vt1211_data *data) +{ + /* set VRM */ + data->vrm = vid_which_vrm(); + + /* Read (and initialize) UCH config */ + data->uch_config = vt1211_read8(data, VT1211_REG_UCH_CONFIG); + if (uch_config > -1) { + data->uch_config = (data->uch_config & 0x83) | + (uch_config << 2); + vt1211_write8(data, VT1211_REG_UCH_CONFIG, data->uch_config); + } + + /* Initialize the interrupt mode (if request at module load time). + * The VT1211 implements 3 different modes for clearing interrupts: + * 0: Clear INT when status register is read. Regenerate INT as long + * as temp stays above hysteresis limit. + * 1: Clear INT when status register is read. DON'T regenerate INT + * until temp falls below hysteresis limit and exceeds hot limit + * again. + * 2: Clear INT when temp falls below max limit. + * + * The driver only allows to force mode 0 since that's the only one + * that makes sense for 'sensors' */ + if (int_mode == 0) { + vt1211_write8(data, VT1211_REG_TEMP1_CONFIG, 0); + vt1211_write8(data, VT1211_REG_TEMP2_CONFIG, 0); + } + + /* Fill in some hard wired values into our data struct */ + data->pwm_auto_pwm[0][3] = 255; + data->pwm_auto_pwm[1][3] = 255; +} + +static void vt1211_remove_sysfs(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + int i; + + for (i = 0; i < ARRAY_SIZE(vt1211_sysfs_in_input); i++) { + device_remove_file(dev, + &vt1211_sysfs_in_input[i].dev_attr); + device_remove_file(dev, + &vt1211_sysfs_in_min[i].dev_attr); + device_remove_file(dev, + &vt1211_sysfs_in_max[i].dev_attr); + device_remove_file(dev, + &vt1211_sysfs_in_alarm[i].dev_attr); + } + for (i = 0; i < ARRAY_SIZE(vt1211_sysfs_temp_input); i++) { + device_remove_file(dev, + &vt1211_sysfs_temp_input[i].dev_attr); + device_remove_file(dev, + &vt1211_sysfs_temp_max[i].dev_attr); + device_remove_file(dev, + &vt1211_sysfs_temp_max_hyst[i].dev_attr); + device_remove_file(dev, + &vt1211_sysfs_temp_alarm[i].dev_attr); + } + for (i = 0; i < ARRAY_SIZE(vt1211_sysfs_fan_pwm); i++) { + device_remove_file(dev, + &vt1211_sysfs_fan_pwm[i].dev_attr); + } + for (i = 0; i < ARRAY_SIZE(vt1211_sysfs_misc); i++) { + device_remove_file(dev, &vt1211_sysfs_misc[i]); + } +} + +static int __devinit vt1211_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct vt1211_data *data; + struct resource *res; + int i, err; + + if (!(data = kzalloc(sizeof(struct vt1211_data), GFP_KERNEL))) { + err = -ENOMEM; + dev_err(dev, "Out of memory\n"); + goto EXIT; + } + + res = platform_get_resource(pdev, IORESOURCE_IO, 0); + data->addr = res->start; + data->name = DRVNAME; + mutex_init(&data->update_lock); + + platform_set_drvdata(pdev, data); + + /* Initialize the VT1211 chip */ + vt1211_init_device(data); + + /* Create sysfs interface files */ + for (i = 0; i < ARRAY_SIZE(vt1211_sysfs_in_input); i++) { + if (ISVOLT(i, data->uch_config)) { + if ((err = device_create_file(dev, + &vt1211_sysfs_in_input[i].dev_attr)) || + (err = device_create_file(dev, + &vt1211_sysfs_in_min[i].dev_attr)) || + (err = device_create_file(dev, + &vt1211_sysfs_in_max[i].dev_attr)) || + (err = device_create_file(dev, + &vt1211_sysfs_in_alarm[i].dev_attr))) { + goto EXIT_DEV_REMOVE; + } + } + } + for (i = 0; i < ARRAY_SIZE(vt1211_sysfs_temp_input); i++) { + if (ISTEMP(i, data->uch_config)) { + if ((err = device_create_file(dev, + &vt1211_sysfs_temp_input[i].dev_attr)) || + (err = device_create_file(dev, + &vt1211_sysfs_temp_max[i].dev_attr)) || + (err = device_create_file(dev, + &vt1211_sysfs_temp_max_hyst[i].dev_attr)) || + (err = device_create_file(dev, + &vt1211_sysfs_temp_alarm[i].dev_attr))) { + goto EXIT_DEV_REMOVE; + } + } + } + for (i = 0; i < ARRAY_SIZE(vt1211_sysfs_fan_pwm); i++) { + err = device_create_file(dev, + &vt1211_sysfs_fan_pwm[i].dev_attr); + if (err) { + goto EXIT_DEV_REMOVE; + } + } + for (i = 0; i < ARRAY_SIZE(vt1211_sysfs_misc); i++) { + err = device_create_file(dev, + &vt1211_sysfs_misc[i]); + if (err) { + goto EXIT_DEV_REMOVE; + } + } + + /* Register device */ + data->class_dev = hwmon_device_register(dev); + if (IS_ERR(data->class_dev)) { + err = PTR_ERR(data->class_dev); + dev_err(dev, "Class registration failed (%d)\n", err); + goto EXIT_DEV_REMOVE_SILENT; + } + + return 0; + +EXIT_DEV_REMOVE: + dev_err(dev, "Sysfs interface creation failed (%d)\n", err); +EXIT_DEV_REMOVE_SILENT: + vt1211_remove_sysfs(pdev); + platform_set_drvdata(pdev, NULL); + kfree(data); +EXIT: + return err; +} + +static int __devexit vt1211_remove(struct platform_device *pdev) +{ + struct vt1211_data *data = platform_get_drvdata(pdev); + + hwmon_device_unregister(data->class_dev); + vt1211_remove_sysfs(pdev); + platform_set_drvdata(pdev, NULL); + kfree(data); + + return 0; +} + +static struct platform_driver vt1211_driver = { + .driver = { + .owner = THIS_MODULE, + .name = DRVNAME, + }, + .probe = vt1211_probe, + .remove = __devexit_p(vt1211_remove), +}; + +static int __init vt1211_device_add(unsigned short address) +{ + struct resource res = { + .start = address, + .end = address + 0x7f, + .flags = IORESOURCE_IO, + }; + int err; + + pdev = platform_device_alloc(DRVNAME, address); + if (!pdev) { + err = -ENOMEM; + printk(KERN_ERR DRVNAME ": Device allocation failed (%d)\n", + err); + goto EXIT; + } + + res.name = pdev->name; + err = platform_device_add_resources(pdev, &res, 1); + if (err) { + printk(KERN_ERR DRVNAME ": Device resource addition failed " + "(%d)\n", err); + goto EXIT_DEV_PUT; + } + + err = platform_device_add(pdev); + if (err) { + printk(KERN_ERR DRVNAME ": Device addition failed (%d)\n", + err); + goto EXIT_DEV_PUT; + } + + return 0; + +EXIT_DEV_PUT: + platform_device_put(pdev); +EXIT: + return err; +} + +static int __init vt1211_find(unsigned short *address) +{ + int err = -ENODEV; + + superio_enter(); + + if (superio_inb(SIO_VT1211_DEVID) != SIO_VT1211_ID) { + goto EXIT; + } + + superio_select(SIO_VT1211_LDN_HWMON); + + if ((superio_inb(SIO_VT1211_ACTIVE) & 1) == 0) { + printk(KERN_WARNING DRVNAME ": HW monitor is disabled, " + "skipping\n"); + goto EXIT; + } + + *address = ((superio_inb(SIO_VT1211_BADDR) << 8) | + (superio_inb(SIO_VT1211_BADDR + 1))) & 0xff00; + if (*address == 0) { + printk(KERN_WARNING DRVNAME ": Base address is not set, " + "skipping\n"); + goto EXIT; + } + + err = 0; + printk(KERN_INFO DRVNAME ": Found VT1211 chip at 0x%04x, " + "revision %u\n", *address, superio_inb(SIO_VT1211_DEVREV)); + +EXIT: + superio_exit(); + return err; +} + +static int __init vt1211_init(void) +{ + int err; + unsigned short address = 0; + + err = vt1211_find(&address); + if (err) { + goto EXIT; + } + + if ((uch_config < -1) || (uch_config > 31)) { + err = -EINVAL; + printk(KERN_WARNING DRVNAME ": Invalid UCH configuration %d. " + "Choose a value between 0 and 31.\n", uch_config); + goto EXIT; + } + + if ((int_mode < -1) || (int_mode > 0)) { + err = -EINVAL; + printk(KERN_WARNING DRVNAME ": Invalid interrupt mode %d. " + "Only mode 0 is supported.\n", int_mode); + goto EXIT; + } + + err = platform_driver_register(&vt1211_driver); + if (err) { + goto EXIT; + } + + /* Sets global pdev as a side effect */ + err = vt1211_device_add(address); + if (err) { + goto EXIT_DRV_UNREGISTER; + } + + return 0; + +EXIT_DRV_UNREGISTER: + platform_driver_unregister(&vt1211_driver); +EXIT: + return err; +} + +static void __exit vt1211_exit(void) +{ + platform_device_unregister(pdev); + platform_driver_unregister(&vt1211_driver); +} + +MODULE_AUTHOR("Juerg Haefliger <juergh@gmail.com>"); +MODULE_DESCRIPTION("VT1211 sensors"); +MODULE_LICENSE("GPL"); + +module_init(vt1211_init); +module_exit(vt1211_exit); diff --git a/drivers/hwmon/vt8231.c b/drivers/hwmon/vt8231.c index 686f3deb309..93f93d4fb8a 100644 --- a/drivers/hwmon/vt8231.c +++ b/drivers/hwmon/vt8231.c @@ -451,37 +451,6 @@ define_temperature_sysfs(4); define_temperature_sysfs(5); define_temperature_sysfs(6); -#define CFG_INFO_TEMP(id) { &sensor_dev_attr_temp##id##_input.dev_attr, \ - &sensor_dev_attr_temp##id##_max_hyst.dev_attr, \ - &sensor_dev_attr_temp##id##_max.dev_attr } -#define CFG_INFO_VOLT(id) { &sensor_dev_attr_in##id##_input.dev_attr, \ - &sensor_dev_attr_in##id##_min.dev_attr, \ - &sensor_dev_attr_in##id##_max.dev_attr } - -struct str_device_attr_table { - struct device_attribute *input; - struct device_attribute *min; - struct device_attribute *max; -}; - -static struct str_device_attr_table cfg_info_temp[] = { - { &dev_attr_temp1_input, &dev_attr_temp1_max_hyst, &dev_attr_temp1_max }, - CFG_INFO_TEMP(2), - CFG_INFO_TEMP(3), - CFG_INFO_TEMP(4), - CFG_INFO_TEMP(5), - CFG_INFO_TEMP(6) -}; - -static struct str_device_attr_table cfg_info_volt[] = { - CFG_INFO_VOLT(0), - CFG_INFO_VOLT(1), - CFG_INFO_VOLT(2), - CFG_INFO_VOLT(3), - CFG_INFO_VOLT(4), - { &dev_attr_in5_input, &dev_attr_in5_min, &dev_attr_in5_max } -}; - /* Fans */ static ssize_t show_fan(struct device *dev, struct device_attribute *attr, char *buf) @@ -585,8 +554,110 @@ static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); +static struct attribute *vt8231_attributes_temps[6][4] = { + { + &dev_attr_temp1_input.attr, + &dev_attr_temp1_max_hyst.attr, + &dev_attr_temp1_max.attr, + NULL + }, { + &sensor_dev_attr_temp2_input.dev_attr.attr, + &sensor_dev_attr_temp2_max_hyst.dev_attr.attr, + &sensor_dev_attr_temp2_max.dev_attr.attr, + NULL + }, { + &sensor_dev_attr_temp3_input.dev_attr.attr, + &sensor_dev_attr_temp3_max_hyst.dev_attr.attr, + &sensor_dev_attr_temp3_max.dev_attr.attr, + NULL + }, { + &sensor_dev_attr_temp4_input.dev_attr.attr, + &sensor_dev_attr_temp4_max_hyst.dev_attr.attr, + &sensor_dev_attr_temp4_max.dev_attr.attr, + NULL + }, { + &sensor_dev_attr_temp5_input.dev_attr.attr, + &sensor_dev_attr_temp5_max_hyst.dev_attr.attr, + &sensor_dev_attr_temp5_max.dev_attr.attr, + NULL + }, { + &sensor_dev_attr_temp6_input.dev_attr.attr, + &sensor_dev_attr_temp6_max_hyst.dev_attr.attr, + &sensor_dev_attr_temp6_max.dev_attr.attr, + NULL + } +}; + +static const struct attribute_group vt8231_group_temps[6] = { + { .attrs = vt8231_attributes_temps[0] }, + { .attrs = vt8231_attributes_temps[1] }, + { .attrs = vt8231_attributes_temps[2] }, + { .attrs = vt8231_attributes_temps[3] }, + { .attrs = vt8231_attributes_temps[4] }, + { .attrs = vt8231_attributes_temps[5] }, +}; + +static struct attribute *vt8231_attributes_volts[6][4] = { + { + &sensor_dev_attr_in0_input.dev_attr.attr, + &sensor_dev_attr_in0_min.dev_attr.attr, + &sensor_dev_attr_in0_max.dev_attr.attr, + NULL + }, { + &sensor_dev_attr_in1_input.dev_attr.attr, + &sensor_dev_attr_in1_min.dev_attr.attr, + &sensor_dev_attr_in1_max.dev_attr.attr, + NULL + }, { + &sensor_dev_attr_in2_input.dev_attr.attr, + &sensor_dev_attr_in2_min.dev_attr.attr, + &sensor_dev_attr_in2_max.dev_attr.attr, + NULL + }, { + &sensor_dev_attr_in3_input.dev_attr.attr, + &sensor_dev_attr_in3_min.dev_attr.attr, + &sensor_dev_attr_in3_max.dev_attr.attr, + NULL + }, { + &sensor_dev_attr_in4_input.dev_attr.attr, + &sensor_dev_attr_in4_min.dev_attr.attr, + &sensor_dev_attr_in4_max.dev_attr.attr, + NULL + }, { + &dev_attr_in5_input.attr, + &dev_attr_in5_min.attr, + &dev_attr_in5_max.attr, + NULL + } +}; + +static const struct attribute_group vt8231_group_volts[6] = { + { .attrs = vt8231_attributes_volts[0] }, + { .attrs = vt8231_attributes_volts[1] }, + { .attrs = vt8231_attributes_volts[2] }, + { .attrs = vt8231_attributes_volts[3] }, + { .attrs = vt8231_attributes_volts[4] }, + { .attrs = vt8231_attributes_volts[5] }, +}; + +static struct attribute *vt8231_attributes[] = { + &sensor_dev_attr_fan1_input.dev_attr.attr, + &sensor_dev_attr_fan2_input.dev_attr.attr, + &sensor_dev_attr_fan1_min.dev_attr.attr, + &sensor_dev_attr_fan2_min.dev_attr.attr, + &sensor_dev_attr_fan1_div.dev_attr.attr, + &sensor_dev_attr_fan2_div.dev_attr.attr, + &dev_attr_alarms.attr, + NULL +}; + +static const struct attribute_group vt8231_group = { + .attrs = vt8231_attributes, +}; + static struct i2c_driver vt8231_driver = { .driver = { + .owner = THIS_MODULE, .name = "vt8231", }, .attach_adapter = vt8231_detect, @@ -670,43 +741,43 @@ int vt8231_detect(struct i2c_adapter *adapter) vt8231_init_client(client); /* Register sysfs hooks */ - data->class_dev = hwmon_device_register(&client->dev); - if (IS_ERR(data->class_dev)) { - err = PTR_ERR(data->class_dev); + if ((err = sysfs_create_group(&client->dev.kobj, &vt8231_group))) goto exit_detach; - } /* Must update device information to find out the config field */ data->uch_config = vt8231_read_value(client, VT8231_REG_UCH_CONFIG); - for (i = 0; i < ARRAY_SIZE(cfg_info_temp); i++) { + for (i = 0; i < ARRAY_SIZE(vt8231_group_temps); i++) { if (ISTEMP(i, data->uch_config)) { - device_create_file(&client->dev, - cfg_info_temp[i].input); - device_create_file(&client->dev, cfg_info_temp[i].max); - device_create_file(&client->dev, cfg_info_temp[i].min); + if ((err = sysfs_create_group(&client->dev.kobj, + &vt8231_group_temps[i]))) + goto exit_remove_files; } } - for (i = 0; i < ARRAY_SIZE(cfg_info_volt); i++) { + for (i = 0; i < ARRAY_SIZE(vt8231_group_volts); i++) { if (ISVOLT(i, data->uch_config)) { - device_create_file(&client->dev, - cfg_info_volt[i].input); - device_create_file(&client->dev, cfg_info_volt[i].max); - device_create_file(&client->dev, cfg_info_volt[i].min); + if ((err = sysfs_create_group(&client->dev.kobj, + &vt8231_group_volts[i]))) + goto exit_remove_files; } } - device_create_file(&client->dev, &sensor_dev_attr_fan1_input.dev_attr); - device_create_file(&client->dev, &sensor_dev_attr_fan2_input.dev_attr); - device_create_file(&client->dev, &sensor_dev_attr_fan1_min.dev_attr); - device_create_file(&client->dev, &sensor_dev_attr_fan2_min.dev_attr); - device_create_file(&client->dev, &sensor_dev_attr_fan1_div.dev_attr); - device_create_file(&client->dev, &sensor_dev_attr_fan2_div.dev_attr); - - device_create_file(&client->dev, &dev_attr_alarms); + data->class_dev = hwmon_device_register(&client->dev); + if (IS_ERR(data->class_dev)) { + err = PTR_ERR(data->class_dev); + goto exit_remove_files; + } return 0; +exit_remove_files: + for (i = 0; i < ARRAY_SIZE(vt8231_group_volts); i++) + sysfs_remove_group(&client->dev.kobj, &vt8231_group_volts[i]); + + for (i = 0; i < ARRAY_SIZE(vt8231_group_temps); i++) + sysfs_remove_group(&client->dev.kobj, &vt8231_group_temps[i]); + + sysfs_remove_group(&client->dev.kobj, &vt8231_group); exit_detach: i2c_detach_client(client); exit_free: @@ -719,10 +790,18 @@ exit_release: static int vt8231_detach_client(struct i2c_client *client) { struct vt8231_data *data = i2c_get_clientdata(client); - int err; + int err, i; hwmon_device_unregister(data->class_dev); + for (i = 0; i < ARRAY_SIZE(vt8231_group_volts); i++) + sysfs_remove_group(&client->dev.kobj, &vt8231_group_volts[i]); + + for (i = 0; i < ARRAY_SIZE(vt8231_group_temps); i++) + sysfs_remove_group(&client->dev.kobj, &vt8231_group_temps[i]); + + sysfs_remove_group(&client->dev.kobj, &vt8231_group); + if ((err = i2c_detach_client(client))) { return err; } diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c index 40301bc6ce1..2257806d010 100644 --- a/drivers/hwmon/w83627ehf.c +++ b/drivers/hwmon/w83627ehf.c @@ -2,6 +2,9 @@ w83627ehf - Driver for the hardware monitoring functionality of the Winbond W83627EHF Super-I/O chip Copyright (C) 2005 Jean Delvare <khali@linux-fr.org> + Copyright (C) 2006 Yuan Mu (Winbond), + Rudolf Marek <r.marek@sh.cvut.cz> + David Hubbard <david.c.hubbard@gmail.com> Shamelessly ripped from the w83627hf driver Copyright (C) 2003 Mark Studebaker @@ -29,8 +32,8 @@ Supports the following chips: - Chip #vin #fan #pwm #temp chip_id man_id - w83627ehf 10 5 - 3 0x88 0x5ca3 + Chip #vin #fan #pwm #temp chip_id man_id + w83627ehf 10 5 4 3 0x88,0xa1 0x5ca3 */ #include <linux/module.h> @@ -145,10 +148,44 @@ static const u16 W83627EHF_REG_TEMP_CONFIG[] = { 0x152, 0x252 }; #define W83627EHF_REG_ALARM2 0x45A #define W83627EHF_REG_ALARM3 0x45B +/* SmartFan registers */ +/* DC or PWM output fan configuration */ +static const u8 W83627EHF_REG_PWM_ENABLE[] = { + 0x04, /* SYS FAN0 output mode and PWM mode */ + 0x04, /* CPU FAN0 output mode and PWM mode */ + 0x12, /* AUX FAN mode */ + 0x62, /* CPU fan1 mode */ +}; + +static const u8 W83627EHF_PWM_MODE_SHIFT[] = { 0, 1, 0, 6 }; +static const u8 W83627EHF_PWM_ENABLE_SHIFT[] = { 2, 4, 1, 4 }; + +/* FAN Duty Cycle, be used to control */ +static const u8 W83627EHF_REG_PWM[] = { 0x01, 0x03, 0x11, 0x61 }; +static const u8 W83627EHF_REG_TARGET[] = { 0x05, 0x06, 0x13, 0x63 }; +static const u8 W83627EHF_REG_TOLERANCE[] = { 0x07, 0x07, 0x14, 0x62 }; + + +/* Advanced Fan control, some values are common for all fans */ +static const u8 W83627EHF_REG_FAN_MIN_OUTPUT[] = { 0x08, 0x09, 0x15, 0x64 }; +static const u8 W83627EHF_REG_FAN_STOP_TIME[] = { 0x0C, 0x0D, 0x17, 0x66 }; + /* * Conversions */ +/* 1 is PWM mode, output in ms */ +static inline unsigned int step_time_from_reg(u8 reg, u8 mode) +{ + return mode ? 100 * reg : 400 * reg; +} + +static inline u8 step_time_to_reg(unsigned int msec, u8 mode) +{ + return SENSORS_LIMIT((mode ? (msec + 50) / 100 : + (msec + 200) / 400), 1, 255); +} + static inline unsigned int fan_from_reg(u8 reg, unsigned int div) { @@ -170,12 +207,12 @@ temp1_from_reg(s8 reg) } static inline s8 -temp1_to_reg(int temp) +temp1_to_reg(int temp, int min, int max) { - if (temp <= -128000) - return -128; - if (temp >= 127000) - return 127; + if (temp <= min) + return min / 1000; + if (temp >= max) + return max / 1000; if (temp < 0) return (temp - 500) / 1000; return (temp + 500) / 1000; @@ -223,6 +260,16 @@ struct w83627ehf_data { s16 temp_max[2]; s16 temp_max_hyst[2]; u32 alarms; + + u8 pwm_mode[4]; /* 0->DC variable voltage, 1->PWM variable duty cycle */ + u8 pwm_enable[4]; /* 1->manual + 2->thermal cruise (also called SmartFan I) */ + u8 pwm[4]; + u8 target_temp[4]; + u8 tolerance[4]; + + u8 fan_min_output[4]; /* minimum fan speed */ + u8 fan_stop_time[4]; }; static inline int is_word_sized(u16 reg) @@ -307,6 +354,8 @@ static void w83627ehf_write_fan_div(struct i2c_client *client, int nr) case 0: reg = (w83627ehf_read_value(client, W83627EHF_REG_FANDIV1) & 0xcf) | ((data->fan_div[0] & 0x03) << 4); + /* fan5 input control bit is write only, compute the value */ + reg |= (data->has_fan & (1 << 4)) ? 1 : 0; w83627ehf_write_value(client, W83627EHF_REG_FANDIV1, reg); reg = (w83627ehf_read_value(client, W83627EHF_REG_VBAT) & 0xdf) | ((data->fan_div[0] & 0x04) << 3); @@ -315,6 +364,8 @@ static void w83627ehf_write_fan_div(struct i2c_client *client, int nr) case 1: reg = (w83627ehf_read_value(client, W83627EHF_REG_FANDIV1) & 0x3f) | ((data->fan_div[1] & 0x03) << 6); + /* fan5 input control bit is write only, compute the value */ + reg |= (data->has_fan & (1 << 4)) ? 1 : 0; w83627ehf_write_value(client, W83627EHF_REG_FANDIV1, reg); reg = (w83627ehf_read_value(client, W83627EHF_REG_VBAT) & 0xbf) | ((data->fan_div[1] & 0x04) << 4); @@ -349,6 +400,7 @@ static struct w83627ehf_data *w83627ehf_update_device(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); struct w83627ehf_data *data = i2c_get_clientdata(client); + int pwmcfg = 0, tolerance = 0; /* shut up the compiler */ int i; mutex_lock(&data->update_lock); @@ -416,6 +468,34 @@ static struct w83627ehf_data *w83627ehf_update_device(struct device *dev) } } + for (i = 0; i < 4; i++) { + /* pwmcfg, tolarance mapped for i=0, i=1 to same reg */ + if (i != 1) { + pwmcfg = w83627ehf_read_value(client, + W83627EHF_REG_PWM_ENABLE[i]); + tolerance = w83627ehf_read_value(client, + W83627EHF_REG_TOLERANCE[i]); + } + data->pwm_mode[i] = + ((pwmcfg >> W83627EHF_PWM_MODE_SHIFT[i]) & 1) + ? 0 : 1; + data->pwm_enable[i] = + ((pwmcfg >> W83627EHF_PWM_ENABLE_SHIFT[i]) + & 3) + 1; + data->pwm[i] = w83627ehf_read_value(client, + W83627EHF_REG_PWM[i]); + data->fan_min_output[i] = w83627ehf_read_value(client, + W83627EHF_REG_FAN_MIN_OUTPUT[i]); + data->fan_stop_time[i] = w83627ehf_read_value(client, + W83627EHF_REG_FAN_STOP_TIME[i]); + data->target_temp[i] = + w83627ehf_read_value(client, + W83627EHF_REG_TARGET[i]) & + (data->pwm_mode[i] == 1 ? 0x7f : 0xff); + data->tolerance[i] = (tolerance >> (i == 1 ? 4 : 0)) + & 0x0f; + } + /* Measured temperatures and limits */ data->temp1 = w83627ehf_read_value(client, W83627EHF_REG_TEMP1); @@ -546,14 +626,6 @@ static struct sensor_device_attribute sda_in_max[] = { SENSOR_ATTR(in9_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 9), }; -static void device_create_file_in(struct device *dev, int i) -{ - device_create_file(dev, &sda_in_input[i].dev_attr); - device_create_file(dev, &sda_in_alarm[i].dev_attr); - device_create_file(dev, &sda_in_min[i].dev_attr); - device_create_file(dev, &sda_in_max[i].dev_attr); -} - #define show_fan_reg(reg) \ static ssize_t \ show_##reg(struct device *dev, struct device_attribute *attr, \ @@ -681,14 +753,6 @@ static struct sensor_device_attribute sda_fan_div[] = { SENSOR_ATTR(fan5_div, S_IRUGO, show_fan_div, NULL, 4), }; -static void device_create_file_fan(struct device *dev, int i) -{ - device_create_file(dev, &sda_fan_input[i].dev_attr); - device_create_file(dev, &sda_fan_alarm[i].dev_attr); - device_create_file(dev, &sda_fan_div[i].dev_attr); - device_create_file(dev, &sda_fan_min[i].dev_attr); -} - #define show_temp1_reg(reg) \ static ssize_t \ show_##reg(struct device *dev, struct device_attribute *attr, \ @@ -711,7 +775,7 @@ store_temp1_##reg(struct device *dev, struct device_attribute *attr, \ u32 val = simple_strtoul(buf, NULL, 10); \ \ mutex_lock(&data->update_lock); \ - data->temp1_##reg = temp1_to_reg(val); \ + data->temp1_##reg = temp1_to_reg(val, -128000, 127000); \ w83627ehf_write_value(client, W83627EHF_REG_TEMP1_##REG, \ data->temp1_##reg); \ mutex_unlock(&data->update_lock); \ @@ -777,10 +841,309 @@ static struct sensor_device_attribute sda_temp[] = { SENSOR_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, 13), }; +#define show_pwm_reg(reg) \ +static ssize_t show_##reg (struct device *dev, struct device_attribute *attr, \ + char *buf) \ +{ \ + struct w83627ehf_data *data = w83627ehf_update_device(dev); \ + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); \ + int nr = sensor_attr->index; \ + return sprintf(buf, "%d\n", data->reg[nr]); \ +} + +show_pwm_reg(pwm_mode) +show_pwm_reg(pwm_enable) +show_pwm_reg(pwm) + +static ssize_t +store_pwm_mode(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct w83627ehf_data *data = i2c_get_clientdata(client); + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); + int nr = sensor_attr->index; + u32 val = simple_strtoul(buf, NULL, 10); + u16 reg; + + if (val > 1) + return -EINVAL; + mutex_lock(&data->update_lock); + reg = w83627ehf_read_value(client, W83627EHF_REG_PWM_ENABLE[nr]); + data->pwm_mode[nr] = val; + reg &= ~(1 << W83627EHF_PWM_MODE_SHIFT[nr]); + if (!val) + reg |= 1 << W83627EHF_PWM_MODE_SHIFT[nr]; + w83627ehf_write_value(client, W83627EHF_REG_PWM_ENABLE[nr], reg); + mutex_unlock(&data->update_lock); + return count; +} + +static ssize_t +store_pwm(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct w83627ehf_data *data = i2c_get_clientdata(client); + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); + int nr = sensor_attr->index; + u32 val = SENSORS_LIMIT(simple_strtoul(buf, NULL, 10), 0, 255); + + mutex_lock(&data->update_lock); + data->pwm[nr] = val; + w83627ehf_write_value(client, W83627EHF_REG_PWM[nr], val); + mutex_unlock(&data->update_lock); + return count; +} + +static ssize_t +store_pwm_enable(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct w83627ehf_data *data = i2c_get_clientdata(client); + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); + int nr = sensor_attr->index; + u32 val = simple_strtoul(buf, NULL, 10); + u16 reg; + + if (!val || (val > 2)) /* only modes 1 and 2 are supported */ + return -EINVAL; + mutex_lock(&data->update_lock); + reg = w83627ehf_read_value(client, W83627EHF_REG_PWM_ENABLE[nr]); + data->pwm_enable[nr] = val; + reg &= ~(0x03 << W83627EHF_PWM_ENABLE_SHIFT[nr]); + reg |= (val - 1) << W83627EHF_PWM_ENABLE_SHIFT[nr]; + w83627ehf_write_value(client, W83627EHF_REG_PWM_ENABLE[nr], reg); + mutex_unlock(&data->update_lock); + return count; +} + + +#define show_tol_temp(reg) \ +static ssize_t show_##reg(struct device *dev, struct device_attribute *attr, \ + char *buf) \ +{ \ + struct w83627ehf_data *data = w83627ehf_update_device(dev); \ + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); \ + int nr = sensor_attr->index; \ + return sprintf(buf, "%d\n", temp1_from_reg(data->reg[nr])); \ +} + +show_tol_temp(tolerance) +show_tol_temp(target_temp) + +static ssize_t +store_target_temp(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct w83627ehf_data *data = i2c_get_clientdata(client); + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); + int nr = sensor_attr->index; + u8 val = temp1_to_reg(simple_strtoul(buf, NULL, 10), 0, 127000); + + mutex_lock(&data->update_lock); + data->target_temp[nr] = val; + w83627ehf_write_value(client, W83627EHF_REG_TARGET[nr], val); + mutex_unlock(&data->update_lock); + return count; +} + +static ssize_t +store_tolerance(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct w83627ehf_data *data = i2c_get_clientdata(client); + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); + int nr = sensor_attr->index; + u16 reg; + /* Limit the temp to 0C - 15C */ + u8 val = temp1_to_reg(simple_strtoul(buf, NULL, 10), 0, 15000); + + mutex_lock(&data->update_lock); + reg = w83627ehf_read_value(client, W83627EHF_REG_TOLERANCE[nr]); + data->tolerance[nr] = val; + if (nr == 1) + reg = (reg & 0x0f) | (val << 4); + else + reg = (reg & 0xf0) | val; + w83627ehf_write_value(client, W83627EHF_REG_TOLERANCE[nr], reg); + mutex_unlock(&data->update_lock); + return count; +} + +static struct sensor_device_attribute sda_pwm[] = { + SENSOR_ATTR(pwm1, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 0), + SENSOR_ATTR(pwm2, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 1), + SENSOR_ATTR(pwm3, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 2), + SENSOR_ATTR(pwm4, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 3), +}; + +static struct sensor_device_attribute sda_pwm_mode[] = { + SENSOR_ATTR(pwm1_mode, S_IWUSR | S_IRUGO, show_pwm_mode, + store_pwm_mode, 0), + SENSOR_ATTR(pwm2_mode, S_IWUSR | S_IRUGO, show_pwm_mode, + store_pwm_mode, 1), + SENSOR_ATTR(pwm3_mode, S_IWUSR | S_IRUGO, show_pwm_mode, + store_pwm_mode, 2), + SENSOR_ATTR(pwm4_mode, S_IWUSR | S_IRUGO, show_pwm_mode, + store_pwm_mode, 3), +}; + +static struct sensor_device_attribute sda_pwm_enable[] = { + SENSOR_ATTR(pwm1_enable, S_IWUSR | S_IRUGO, show_pwm_enable, + store_pwm_enable, 0), + SENSOR_ATTR(pwm2_enable, S_IWUSR | S_IRUGO, show_pwm_enable, + store_pwm_enable, 1), + SENSOR_ATTR(pwm3_enable, S_IWUSR | S_IRUGO, show_pwm_enable, + store_pwm_enable, 2), + SENSOR_ATTR(pwm4_enable, S_IWUSR | S_IRUGO, show_pwm_enable, + store_pwm_enable, 3), +}; + +static struct sensor_device_attribute sda_target_temp[] = { + SENSOR_ATTR(pwm1_target, S_IWUSR | S_IRUGO, show_target_temp, + store_target_temp, 0), + SENSOR_ATTR(pwm2_target, S_IWUSR | S_IRUGO, show_target_temp, + store_target_temp, 1), + SENSOR_ATTR(pwm3_target, S_IWUSR | S_IRUGO, show_target_temp, + store_target_temp, 2), + SENSOR_ATTR(pwm4_target, S_IWUSR | S_IRUGO, show_target_temp, + store_target_temp, 3), +}; + +static struct sensor_device_attribute sda_tolerance[] = { + SENSOR_ATTR(pwm1_tolerance, S_IWUSR | S_IRUGO, show_tolerance, + store_tolerance, 0), + SENSOR_ATTR(pwm2_tolerance, S_IWUSR | S_IRUGO, show_tolerance, + store_tolerance, 1), + SENSOR_ATTR(pwm3_tolerance, S_IWUSR | S_IRUGO, show_tolerance, + store_tolerance, 2), + SENSOR_ATTR(pwm4_tolerance, S_IWUSR | S_IRUGO, show_tolerance, + store_tolerance, 3), +}; + +/* Smart Fan registers */ + +#define fan_functions(reg, REG) \ +static ssize_t show_##reg(struct device *dev, struct device_attribute *attr, \ + char *buf) \ +{ \ + struct w83627ehf_data *data = w83627ehf_update_device(dev); \ + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); \ + int nr = sensor_attr->index; \ + return sprintf(buf, "%d\n", data->reg[nr]); \ +}\ +static ssize_t \ +store_##reg(struct device *dev, struct device_attribute *attr, \ + const char *buf, size_t count) \ +{\ + struct i2c_client *client = to_i2c_client(dev); \ + struct w83627ehf_data *data = i2c_get_clientdata(client); \ + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); \ + int nr = sensor_attr->index; \ + u32 val = SENSORS_LIMIT(simple_strtoul(buf, NULL, 10), 1, 255); \ + mutex_lock(&data->update_lock); \ + data->reg[nr] = val; \ + w83627ehf_write_value(client, W83627EHF_REG_##REG[nr], val); \ + mutex_unlock(&data->update_lock); \ + return count; \ +} + +fan_functions(fan_min_output, FAN_MIN_OUTPUT) + +#define fan_time_functions(reg, REG) \ +static ssize_t show_##reg(struct device *dev, struct device_attribute *attr, \ + char *buf) \ +{ \ + struct w83627ehf_data *data = w83627ehf_update_device(dev); \ + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); \ + int nr = sensor_attr->index; \ + return sprintf(buf, "%d\n", \ + step_time_from_reg(data->reg[nr], data->pwm_mode[nr])); \ +} \ +\ +static ssize_t \ +store_##reg(struct device *dev, struct device_attribute *attr, \ + const char *buf, size_t count) \ +{ \ + struct i2c_client *client = to_i2c_client(dev); \ + struct w83627ehf_data *data = i2c_get_clientdata(client); \ + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); \ + int nr = sensor_attr->index; \ + u8 val = step_time_to_reg(simple_strtoul(buf, NULL, 10), \ + data->pwm_mode[nr]); \ + mutex_lock(&data->update_lock); \ + data->reg[nr] = val; \ + w83627ehf_write_value(client, W83627EHF_REG_##REG[nr], val); \ + mutex_unlock(&data->update_lock); \ + return count; \ +} \ + +fan_time_functions(fan_stop_time, FAN_STOP_TIME) + + +static struct sensor_device_attribute sda_sf3_arrays_fan4[] = { + SENSOR_ATTR(pwm4_stop_time, S_IWUSR | S_IRUGO, show_fan_stop_time, + store_fan_stop_time, 3), + SENSOR_ATTR(pwm4_min_output, S_IWUSR | S_IRUGO, show_fan_min_output, + store_fan_min_output, 3), +}; + +static struct sensor_device_attribute sda_sf3_arrays[] = { + SENSOR_ATTR(pwm1_stop_time, S_IWUSR | S_IRUGO, show_fan_stop_time, + store_fan_stop_time, 0), + SENSOR_ATTR(pwm2_stop_time, S_IWUSR | S_IRUGO, show_fan_stop_time, + store_fan_stop_time, 1), + SENSOR_ATTR(pwm3_stop_time, S_IWUSR | S_IRUGO, show_fan_stop_time, + store_fan_stop_time, 2), + SENSOR_ATTR(pwm1_min_output, S_IWUSR | S_IRUGO, show_fan_min_output, + store_fan_min_output, 0), + SENSOR_ATTR(pwm2_min_output, S_IWUSR | S_IRUGO, show_fan_min_output, + store_fan_min_output, 1), + SENSOR_ATTR(pwm3_min_output, S_IWUSR | S_IRUGO, show_fan_min_output, + store_fan_min_output, 2), +}; + /* * Driver and client management */ +static void w83627ehf_device_remove_files(struct device *dev) +{ + /* some entries in the following arrays may not have been used in + * device_create_file(), but device_remove_file() will ignore them */ + int i; + + for (i = 0; i < ARRAY_SIZE(sda_sf3_arrays); i++) + device_remove_file(dev, &sda_sf3_arrays[i].dev_attr); + for (i = 0; i < ARRAY_SIZE(sda_sf3_arrays_fan4); i++) + device_remove_file(dev, &sda_sf3_arrays_fan4[i].dev_attr); + for (i = 0; i < 10; i++) { + device_remove_file(dev, &sda_in_input[i].dev_attr); + device_remove_file(dev, &sda_in_alarm[i].dev_attr); + device_remove_file(dev, &sda_in_min[i].dev_attr); + device_remove_file(dev, &sda_in_max[i].dev_attr); + } + for (i = 0; i < 5; i++) { + device_remove_file(dev, &sda_fan_input[i].dev_attr); + device_remove_file(dev, &sda_fan_alarm[i].dev_attr); + device_remove_file(dev, &sda_fan_div[i].dev_attr); + device_remove_file(dev, &sda_fan_min[i].dev_attr); + } + for (i = 0; i < 4; i++) { + device_remove_file(dev, &sda_pwm[i].dev_attr); + device_remove_file(dev, &sda_pwm_mode[i].dev_attr); + device_remove_file(dev, &sda_pwm_enable[i].dev_attr); + device_remove_file(dev, &sda_target_temp[i].dev_attr); + device_remove_file(dev, &sda_tolerance[i].dev_attr); + } + for (i = 0; i < ARRAY_SIZE(sda_temp); i++) + device_remove_file(dev, &sda_temp[i].dev_attr); +} + static struct i2c_driver w83627ehf_driver; static void w83627ehf_init_client(struct i2c_client *client) @@ -810,6 +1173,7 @@ static int w83627ehf_detect(struct i2c_adapter *adapter) struct i2c_client *client; struct w83627ehf_data *data; struct device *dev; + u8 fan4pin, fan5pin; int i, err = 0; if (!request_region(address + REGION_OFFSET, REGION_LENGTH, @@ -848,35 +1212,90 @@ static int w83627ehf_detect(struct i2c_adapter *adapter) data->fan_min[i] = w83627ehf_read_value(client, W83627EHF_REG_FAN_MIN[i]); + /* fan4 and fan5 share some pins with the GPIO and serial flash */ + + superio_enter(); + fan5pin = superio_inb(0x24) & 0x2; + fan4pin = superio_inb(0x29) & 0x6; + superio_exit(); + /* It looks like fan4 and fan5 pins can be alternatively used - as fan on/off switches */ + as fan on/off switches, but fan5 control is write only :/ + We assume that if the serial interface is disabled, designers + connected fan5 as input unless they are emitting log 1, which + is not the default. */ + data->has_fan = 0x07; /* fan1, fan2 and fan3 */ i = w83627ehf_read_value(client, W83627EHF_REG_FANDIV1); - if (i & (1 << 2)) + if ((i & (1 << 2)) && (!fan4pin)) data->has_fan |= (1 << 3); - if (i & (1 << 0)) + if (!(i & (1 << 1)) && (!fan5pin)) data->has_fan |= (1 << 4); /* Register sysfs hooks */ - data->class_dev = hwmon_device_register(dev); - if (IS_ERR(data->class_dev)) { - err = PTR_ERR(data->class_dev); - goto exit_detach; - } + for (i = 0; i < ARRAY_SIZE(sda_sf3_arrays); i++) + if ((err = device_create_file(dev, + &sda_sf3_arrays[i].dev_attr))) + goto exit_remove; + + /* if fan4 is enabled create the sf3 files for it */ + if (data->has_fan & (1 << 3)) + for (i = 0; i < ARRAY_SIZE(sda_sf3_arrays_fan4); i++) { + if ((err = device_create_file(dev, + &sda_sf3_arrays_fan4[i].dev_attr))) + goto exit_remove; + } for (i = 0; i < 10; i++) - device_create_file_in(dev, i); + if ((err = device_create_file(dev, &sda_in_input[i].dev_attr)) + || (err = device_create_file(dev, + &sda_in_alarm[i].dev_attr)) + || (err = device_create_file(dev, + &sda_in_min[i].dev_attr)) + || (err = device_create_file(dev, + &sda_in_max[i].dev_attr))) + goto exit_remove; for (i = 0; i < 5; i++) { - if (data->has_fan & (1 << i)) - device_create_file_fan(dev, i); + if (data->has_fan & (1 << i)) { + if ((err = device_create_file(dev, + &sda_fan_input[i].dev_attr)) + || (err = device_create_file(dev, + &sda_fan_alarm[i].dev_attr)) + || (err = device_create_file(dev, + &sda_fan_div[i].dev_attr)) + || (err = device_create_file(dev, + &sda_fan_min[i].dev_attr))) + goto exit_remove; + if (i < 4 && /* w83627ehf only has 4 pwm */ + ((err = device_create_file(dev, + &sda_pwm[i].dev_attr)) + || (err = device_create_file(dev, + &sda_pwm_mode[i].dev_attr)) + || (err = device_create_file(dev, + &sda_pwm_enable[i].dev_attr)) + || (err = device_create_file(dev, + &sda_target_temp[i].dev_attr)) + || (err = device_create_file(dev, + &sda_tolerance[i].dev_attr)))) + goto exit_remove; + } } + for (i = 0; i < ARRAY_SIZE(sda_temp); i++) - device_create_file(dev, &sda_temp[i].dev_attr); + if ((err = device_create_file(dev, &sda_temp[i].dev_attr))) + goto exit_remove; + + data->class_dev = hwmon_device_register(dev); + if (IS_ERR(data->class_dev)) { + err = PTR_ERR(data->class_dev); + goto exit_remove; + } return 0; -exit_detach: +exit_remove: + w83627ehf_device_remove_files(dev); i2c_detach_client(client); exit_free: kfree(data); @@ -892,6 +1311,7 @@ static int w83627ehf_detach_client(struct i2c_client *client) int err; hwmon_device_unregister(data->class_dev); + w83627ehf_device_remove_files(&client->dev); if ((err = i2c_detach_client(client))) return err; @@ -903,6 +1323,7 @@ static int w83627ehf_detach_client(struct i2c_client *client) static struct i2c_driver w83627ehf_driver = { .driver = { + .owner = THIS_MODULE, .name = "w83627ehf", }, .attach_adapter = w83627ehf_detect, diff --git a/drivers/hwmon/w83627hf.c b/drivers/hwmon/w83627hf.c index 79368d53c36..dfdc29c7712 100644 --- a/drivers/hwmon/w83627hf.c +++ b/drivers/hwmon/w83627hf.c @@ -339,6 +339,7 @@ static void w83627hf_init_client(struct i2c_client *client); static struct i2c_driver w83627hf_driver = { .driver = { + .owner = THIS_MODULE, .name = "w83627hf", }, .attach_adapter = w83627hf_detect, @@ -511,13 +512,6 @@ static DEVICE_ATTR(in0_min, S_IRUGO | S_IWUSR, static DEVICE_ATTR(in0_max, S_IRUGO | S_IWUSR, show_regs_in_max0, store_regs_in_max0); -#define device_create_file_in(client, offset) \ -do { \ -device_create_file(&client->dev, &dev_attr_in##offset##_input); \ -device_create_file(&client->dev, &dev_attr_in##offset##_min); \ -device_create_file(&client->dev, &dev_attr_in##offset##_max); \ -} while (0) - #define show_fan_reg(reg) \ static ssize_t show_##reg (struct device *dev, char *buf, int nr) \ { \ @@ -575,12 +569,6 @@ sysfs_fan_min_offset(2); sysfs_fan_offset(3); sysfs_fan_min_offset(3); -#define device_create_file_fan(client, offset) \ -do { \ -device_create_file(&client->dev, &dev_attr_fan##offset##_input); \ -device_create_file(&client->dev, &dev_attr_fan##offset##_min); \ -} while (0) - #define show_temp_reg(reg) \ static ssize_t show_##reg (struct device *dev, char *buf, int nr) \ { \ @@ -655,13 +643,6 @@ sysfs_temp_offsets(1); sysfs_temp_offsets(2); sysfs_temp_offsets(3); -#define device_create_file_temp(client, offset) \ -do { \ -device_create_file(&client->dev, &dev_attr_temp##offset##_input); \ -device_create_file(&client->dev, &dev_attr_temp##offset##_max); \ -device_create_file(&client->dev, &dev_attr_temp##offset##_max_hyst); \ -} while (0) - static ssize_t show_vid_reg(struct device *dev, struct device_attribute *attr, char *buf) { @@ -669,8 +650,6 @@ show_vid_reg(struct device *dev, struct device_attribute *attr, char *buf) return sprintf(buf, "%ld\n", (long) vid_from_reg(data->vid, data->vrm)); } static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid_reg, NULL); -#define device_create_file_vid(client) \ -device_create_file(&client->dev, &dev_attr_cpu0_vid) static ssize_t show_vrm_reg(struct device *dev, struct device_attribute *attr, char *buf) @@ -691,8 +670,6 @@ store_vrm_reg(struct device *dev, struct device_attribute *attr, const char *buf return count; } static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm_reg, store_vrm_reg); -#define device_create_file_vrm(client) \ -device_create_file(&client->dev, &dev_attr_vrm) static ssize_t show_alarms_reg(struct device *dev, struct device_attribute *attr, char *buf) @@ -701,8 +678,6 @@ show_alarms_reg(struct device *dev, struct device_attribute *attr, char *buf) return sprintf(buf, "%ld\n", (long) data->alarms); } static DEVICE_ATTR(alarms, S_IRUGO, show_alarms_reg, NULL); -#define device_create_file_alarms(client) \ -device_create_file(&client->dev, &dev_attr_alarms) #define show_beep_reg(REG, reg) \ static ssize_t show_beep_##reg (struct device *dev, struct device_attribute *attr, char *buf) \ @@ -765,12 +740,6 @@ static DEVICE_ATTR(beep_##reg, S_IRUGO | S_IWUSR, \ sysfs_beep(ENABLE, enable); sysfs_beep(MASK, mask); -#define device_create_file_beep(client) \ -do { \ -device_create_file(&client->dev, &dev_attr_beep_enable); \ -device_create_file(&client->dev, &dev_attr_beep_mask); \ -} while (0) - static ssize_t show_fan_div_reg(struct device *dev, char *buf, int nr) { @@ -836,11 +805,6 @@ sysfs_fan_div(1); sysfs_fan_div(2); sysfs_fan_div(3); -#define device_create_file_fan_div(client, offset) \ -do { \ -device_create_file(&client->dev, &dev_attr_fan##offset##_div); \ -} while (0) - static ssize_t show_pwm_reg(struct device *dev, char *buf, int nr) { @@ -895,11 +859,6 @@ sysfs_pwm(1); sysfs_pwm(2); sysfs_pwm(3); -#define device_create_file_pwm(client, offset) \ -do { \ -device_create_file(&client->dev, &dev_attr_pwm##offset); \ -} while (0) - static ssize_t show_sensor_reg(struct device *dev, char *buf, int nr) { @@ -971,12 +930,6 @@ sysfs_sensor(1); sysfs_sensor(2); sysfs_sensor(3); -#define device_create_file_sensor(client, offset) \ -do { \ -device_create_file(&client->dev, &dev_attr_temp##offset##_type); \ -} while (0) - - static int __init w83627hf_find(int sioaddr, unsigned short *addr) { u16 val; @@ -1008,6 +961,85 @@ static int __init w83627hf_find(int sioaddr, unsigned short *addr) return 0; } +static struct attribute *w83627hf_attributes[] = { + &dev_attr_in0_input.attr, + &dev_attr_in0_min.attr, + &dev_attr_in0_max.attr, + &dev_attr_in2_input.attr, + &dev_attr_in2_min.attr, + &dev_attr_in2_max.attr, + &dev_attr_in3_input.attr, + &dev_attr_in3_min.attr, + &dev_attr_in3_max.attr, + &dev_attr_in4_input.attr, + &dev_attr_in4_min.attr, + &dev_attr_in4_max.attr, + &dev_attr_in7_input.attr, + &dev_attr_in7_min.attr, + &dev_attr_in7_max.attr, + &dev_attr_in8_input.attr, + &dev_attr_in8_min.attr, + &dev_attr_in8_max.attr, + + &dev_attr_fan1_input.attr, + &dev_attr_fan1_min.attr, + &dev_attr_fan1_div.attr, + &dev_attr_fan2_input.attr, + &dev_attr_fan2_min.attr, + &dev_attr_fan2_div.attr, + + &dev_attr_temp1_input.attr, + &dev_attr_temp1_max.attr, + &dev_attr_temp1_max_hyst.attr, + &dev_attr_temp1_type.attr, + &dev_attr_temp2_input.attr, + &dev_attr_temp2_max.attr, + &dev_attr_temp2_max_hyst.attr, + &dev_attr_temp2_type.attr, + + &dev_attr_alarms.attr, + &dev_attr_beep_enable.attr, + &dev_attr_beep_mask.attr, + + &dev_attr_pwm1.attr, + &dev_attr_pwm2.attr, + + NULL +}; + +static const struct attribute_group w83627hf_group = { + .attrs = w83627hf_attributes, +}; + +static struct attribute *w83627hf_attributes_opt[] = { + &dev_attr_in1_input.attr, + &dev_attr_in1_min.attr, + &dev_attr_in1_max.attr, + &dev_attr_in5_input.attr, + &dev_attr_in5_min.attr, + &dev_attr_in5_max.attr, + &dev_attr_in6_input.attr, + &dev_attr_in6_min.attr, + &dev_attr_in6_max.attr, + + &dev_attr_fan3_input.attr, + &dev_attr_fan3_min.attr, + &dev_attr_fan3_div.attr, + + &dev_attr_temp3_input.attr, + &dev_attr_temp3_max.attr, + &dev_attr_temp3_max_hyst.attr, + &dev_attr_temp3_type.attr, + + &dev_attr_pwm3.attr, + + NULL +}; + +static const struct attribute_group w83627hf_group_opt = { + .attrs = w83627hf_attributes_opt, +}; + static int w83627hf_detect(struct i2c_adapter *adapter) { int val, kind; @@ -1107,62 +1139,72 @@ static int w83627hf_detect(struct i2c_adapter *adapter) data->fan_min[1] = w83627hf_read_value(new_client, W83781D_REG_FAN_MIN(2)); data->fan_min[2] = w83627hf_read_value(new_client, W83781D_REG_FAN_MIN(3)); - /* Register sysfs hooks */ - data->class_dev = hwmon_device_register(&new_client->dev); - if (IS_ERR(data->class_dev)) { - err = PTR_ERR(data->class_dev); + /* Register common device attributes */ + if ((err = sysfs_create_group(&new_client->dev.kobj, &w83627hf_group))) goto ERROR3; - } - - device_create_file_in(new_client, 0); - if (kind != w83697hf) - device_create_file_in(new_client, 1); - device_create_file_in(new_client, 2); - device_create_file_in(new_client, 3); - device_create_file_in(new_client, 4); - if (kind == w83627hf || kind == w83697hf) { - device_create_file_in(new_client, 5); - device_create_file_in(new_client, 6); - } - device_create_file_in(new_client, 7); - device_create_file_in(new_client, 8); - - device_create_file_fan(new_client, 1); - device_create_file_fan(new_client, 2); - if (kind != w83697hf) - device_create_file_fan(new_client, 3); - - device_create_file_temp(new_client, 1); - device_create_file_temp(new_client, 2); - if (kind != w83697hf) - device_create_file_temp(new_client, 3); - if (kind != w83697hf && data->vid != 0xff) { - device_create_file_vid(new_client); - device_create_file_vrm(new_client); - } + /* Register chip-specific device attributes */ + if (kind == w83627hf || kind == w83697hf) + if ((err = device_create_file(&new_client->dev, + &dev_attr_in5_input)) + || (err = device_create_file(&new_client->dev, + &dev_attr_in5_min)) + || (err = device_create_file(&new_client->dev, + &dev_attr_in5_max)) + || (err = device_create_file(&new_client->dev, + &dev_attr_in6_input)) + || (err = device_create_file(&new_client->dev, + &dev_attr_in6_min)) + || (err = device_create_file(&new_client->dev, + &dev_attr_in6_max))) + goto ERROR4; - device_create_file_fan_div(new_client, 1); - device_create_file_fan_div(new_client, 2); if (kind != w83697hf) - device_create_file_fan_div(new_client, 3); - - device_create_file_alarms(new_client); - - device_create_file_beep(new_client); + if ((err = device_create_file(&new_client->dev, + &dev_attr_in1_input)) + || (err = device_create_file(&new_client->dev, + &dev_attr_in1_min)) + || (err = device_create_file(&new_client->dev, + &dev_attr_in1_max)) + || (err = device_create_file(&new_client->dev, + &dev_attr_fan3_input)) + || (err = device_create_file(&new_client->dev, + &dev_attr_fan3_min)) + || (err = device_create_file(&new_client->dev, + &dev_attr_fan3_div)) + || (err = device_create_file(&new_client->dev, + &dev_attr_temp3_input)) + || (err = device_create_file(&new_client->dev, + &dev_attr_temp3_max)) + || (err = device_create_file(&new_client->dev, + &dev_attr_temp3_max_hyst)) + || (err = device_create_file(&new_client->dev, + &dev_attr_temp3_type))) + goto ERROR4; + + if (kind != w83697hf && data->vid != 0xff) + if ((err = device_create_file(&new_client->dev, + &dev_attr_cpu0_vid)) + || (err = device_create_file(&new_client->dev, + &dev_attr_vrm))) + goto ERROR4; - device_create_file_pwm(new_client, 1); - device_create_file_pwm(new_client, 2); if (kind == w83627thf || kind == w83637hf || kind == w83687thf) - device_create_file_pwm(new_client, 3); + if ((err = device_create_file(&new_client->dev, + &dev_attr_pwm3))) + goto ERROR4; - device_create_file_sensor(new_client, 1); - device_create_file_sensor(new_client, 2); - if (kind != w83697hf) - device_create_file_sensor(new_client, 3); + data->class_dev = hwmon_device_register(&new_client->dev); + if (IS_ERR(data->class_dev)) { + err = PTR_ERR(data->class_dev); + goto ERROR4; + } return 0; + ERROR4: + sysfs_remove_group(&new_client->dev.kobj, &w83627hf_group); + sysfs_remove_group(&new_client->dev.kobj, &w83627hf_group_opt); ERROR3: i2c_detach_client(new_client); ERROR2: @@ -1180,6 +1222,9 @@ static int w83627hf_detach_client(struct i2c_client *client) hwmon_device_unregister(data->class_dev); + sysfs_remove_group(&client->dev.kobj, &w83627hf_group); + sysfs_remove_group(&client->dev.kobj, &w83627hf_group_opt); + if ((err = i2c_detach_client(client))) return err; diff --git a/drivers/hwmon/w83781d.c b/drivers/hwmon/w83781d.c index 7be469ed0f8..1232171c3aa 100644 --- a/drivers/hwmon/w83781d.c +++ b/drivers/hwmon/w83781d.c @@ -41,6 +41,7 @@ #include <linux/i2c-isa.h> #include <linux/hwmon.h> #include <linux/hwmon-vid.h> +#include <linux/sysfs.h> #include <linux/err.h> #include <linux/mutex.h> #include <asm/io.h> @@ -288,6 +289,7 @@ static struct i2c_driver w83781d_driver = { static struct i2c_driver w83781d_isa_driver = { .driver = { + .owner = THIS_MODULE, .name = "w83781d-isa", }, .attach_adapter = w83781d_isa_attach_adapter, @@ -359,13 +361,6 @@ sysfs_in_offsets(6); sysfs_in_offsets(7); sysfs_in_offsets(8); -#define device_create_file_in(client, offset) \ -do { \ -device_create_file(&client->dev, &dev_attr_in##offset##_input); \ -device_create_file(&client->dev, &dev_attr_in##offset##_min); \ -device_create_file(&client->dev, &dev_attr_in##offset##_max); \ -} while (0) - #define show_fan_reg(reg) \ static ssize_t show_##reg (struct device *dev, char *buf, int nr) \ { \ @@ -420,12 +415,6 @@ sysfs_fan_min_offset(2); sysfs_fan_offset(3); sysfs_fan_min_offset(3); -#define device_create_file_fan(client, offset) \ -do { \ -device_create_file(&client->dev, &dev_attr_fan##offset##_input); \ -device_create_file(&client->dev, &dev_attr_fan##offset##_min); \ -} while (0) - #define show_temp_reg(reg) \ static ssize_t show_##reg (struct device *dev, char *buf, int nr) \ { \ @@ -496,13 +485,6 @@ sysfs_temp_offsets(1); sysfs_temp_offsets(2); sysfs_temp_offsets(3); -#define device_create_file_temp(client, offset) \ -do { \ -device_create_file(&client->dev, &dev_attr_temp##offset##_input); \ -device_create_file(&client->dev, &dev_attr_temp##offset##_max); \ -device_create_file(&client->dev, &dev_attr_temp##offset##_max_hyst); \ -} while (0) - static ssize_t show_vid_reg(struct device *dev, struct device_attribute *attr, char *buf) { @@ -510,10 +492,8 @@ show_vid_reg(struct device *dev, struct device_attribute *attr, char *buf) return sprintf(buf, "%ld\n", (long) vid_from_reg(data->vid, data->vrm)); } -static -DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid_reg, NULL); -#define device_create_file_vid(client) \ -device_create_file(&client->dev, &dev_attr_cpu0_vid); +static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid_reg, NULL); + static ssize_t show_vrm_reg(struct device *dev, struct device_attribute *attr, char *buf) { @@ -534,10 +514,8 @@ store_vrm_reg(struct device *dev, struct device_attribute *attr, const char *buf return count; } -static -DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm_reg, store_vrm_reg); -#define device_create_file_vrm(client) \ -device_create_file(&client->dev, &dev_attr_vrm); +static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm_reg, store_vrm_reg); + static ssize_t show_alarms_reg(struct device *dev, struct device_attribute *attr, char *buf) { @@ -545,10 +523,8 @@ show_alarms_reg(struct device *dev, struct device_attribute *attr, char *buf) return sprintf(buf, "%u\n", data->alarms); } -static -DEVICE_ATTR(alarms, S_IRUGO, show_alarms_reg, NULL); -#define device_create_file_alarms(client) \ -device_create_file(&client->dev, &dev_attr_alarms); +static DEVICE_ATTR(alarms, S_IRUGO, show_alarms_reg, NULL); + static ssize_t show_beep_mask (struct device *dev, struct device_attribute *attr, char *buf) { struct w83781d_data *data = w83781d_update_device(dev); @@ -614,12 +590,6 @@ static DEVICE_ATTR(beep_##reg, S_IRUGO | S_IWUSR, show_regs_beep_##reg, store_re sysfs_beep(ENABLE, enable); sysfs_beep(MASK, mask); -#define device_create_file_beep(client) \ -do { \ -device_create_file(&client->dev, &dev_attr_beep_enable); \ -device_create_file(&client->dev, &dev_attr_beep_mask); \ -} while (0) - static ssize_t show_fan_div_reg(struct device *dev, char *buf, int nr) { @@ -685,11 +655,6 @@ sysfs_fan_div(1); sysfs_fan_div(2); sysfs_fan_div(3); -#define device_create_file_fan_div(client, offset) \ -do { \ -device_create_file(&client->dev, &dev_attr_fan##offset##_div); \ -} while (0) - static ssize_t show_pwm_reg(struct device *dev, char *buf, int nr) { @@ -786,16 +751,6 @@ sysfs_pwmenable(2); /* only PWM2 can be enabled/disabled */ sysfs_pwm(3); sysfs_pwm(4); -#define device_create_file_pwm(client, offset) \ -do { \ -device_create_file(&client->dev, &dev_attr_pwm##offset); \ -} while (0) - -#define device_create_file_pwmenable(client, offset) \ -do { \ -device_create_file(&client->dev, &dev_attr_pwm##offset##_enable); \ -} while (0) - static ssize_t show_sensor_reg(struct device *dev, char *buf, int nr) { @@ -864,11 +819,6 @@ sysfs_sensor(1); sysfs_sensor(2); sysfs_sensor(3); -#define device_create_file_sensor(client, offset) \ -do { \ -device_create_file(&client->dev, &dev_attr_temp##offset##_type); \ -} while (0) - /* This function is called when: * w83781d_driver is inserted (when this module is loaded), for each available adapter @@ -993,11 +943,69 @@ ERROR_SC_0: return err; } +#define IN_UNIT_ATTRS(X) \ + &dev_attr_in##X##_input.attr, \ + &dev_attr_in##X##_min.attr, \ + &dev_attr_in##X##_max.attr + +#define FAN_UNIT_ATTRS(X) \ + &dev_attr_fan##X##_input.attr, \ + &dev_attr_fan##X##_min.attr, \ + &dev_attr_fan##X##_div.attr + +#define TEMP_UNIT_ATTRS(X) \ + &dev_attr_temp##X##_input.attr, \ + &dev_attr_temp##X##_max.attr, \ + &dev_attr_temp##X##_max_hyst.attr + +static struct attribute* w83781d_attributes[] = { + IN_UNIT_ATTRS(0), + IN_UNIT_ATTRS(2), + IN_UNIT_ATTRS(3), + IN_UNIT_ATTRS(4), + IN_UNIT_ATTRS(5), + IN_UNIT_ATTRS(6), + FAN_UNIT_ATTRS(1), + FAN_UNIT_ATTRS(2), + FAN_UNIT_ATTRS(3), + TEMP_UNIT_ATTRS(1), + TEMP_UNIT_ATTRS(2), + &dev_attr_cpu0_vid.attr, + &dev_attr_vrm.attr, + &dev_attr_alarms.attr, + &dev_attr_beep_mask.attr, + &dev_attr_beep_enable.attr, + NULL +}; +static const struct attribute_group w83781d_group = { + .attrs = w83781d_attributes, +}; + +static struct attribute *w83781d_attributes_opt[] = { + IN_UNIT_ATTRS(1), + IN_UNIT_ATTRS(7), + IN_UNIT_ATTRS(8), + TEMP_UNIT_ATTRS(3), + &dev_attr_pwm1.attr, + &dev_attr_pwm2.attr, + &dev_attr_pwm2_enable.attr, + &dev_attr_pwm3.attr, + &dev_attr_pwm4.attr, + &dev_attr_temp1_type.attr, + &dev_attr_temp2_type.attr, + &dev_attr_temp3_type.attr, + NULL +}; +static const struct attribute_group w83781d_group_opt = { + .attrs = w83781d_attributes_opt, +}; + static int w83781d_detect(struct i2c_adapter *adapter, int address, int kind) { int i = 0, val1 = 0, val2; - struct i2c_client *new_client; + struct i2c_client *client; + struct device *dev; struct w83781d_data *data; int err; const char *client_name = ""; @@ -1074,13 +1082,14 @@ w83781d_detect(struct i2c_adapter *adapter, int address, int kind) goto ERROR1; } - new_client = &data->client; - i2c_set_clientdata(new_client, data); - new_client->addr = address; + client = &data->client; + i2c_set_clientdata(client, data); + client->addr = address; mutex_init(&data->lock); - new_client->adapter = adapter; - new_client->driver = is_isa ? &w83781d_isa_driver : &w83781d_driver; - new_client->flags = 0; + client->adapter = adapter; + client->driver = is_isa ? &w83781d_isa_driver : &w83781d_driver; + client->flags = 0; + dev = &client->dev; /* Now, we do the remaining detection. */ @@ -1089,20 +1098,20 @@ w83781d_detect(struct i2c_adapter *adapter, int address, int kind) force_*=... parameter, and the Winbond will be reset to the right bank. */ if (kind < 0) { - if (w83781d_read_value(new_client, W83781D_REG_CONFIG) & 0x80) { - dev_dbg(&new_client->dev, "Detection failed at step " - "3\n"); + if (w83781d_read_value(client, W83781D_REG_CONFIG) & 0x80) { + dev_dbg(&adapter->dev, "Detection of w83781d chip " + "failed at step 3\n"); err = -ENODEV; goto ERROR2; } - val1 = w83781d_read_value(new_client, W83781D_REG_BANK); - val2 = w83781d_read_value(new_client, W83781D_REG_CHIPMAN); + val1 = w83781d_read_value(client, W83781D_REG_BANK); + val2 = w83781d_read_value(client, W83781D_REG_CHIPMAN); /* Check for Winbond or Asus ID if in bank 0 */ if ((!(val1 & 0x07)) && (((!(val1 & 0x80)) && (val2 != 0xa3) && (val2 != 0xc3)) || ((val1 & 0x80) && (val2 != 0x5c) && (val2 != 0x12)))) { - dev_dbg(&new_client->dev, "Detection failed at step " - "4\n"); + dev_dbg(&adapter->dev, "Detection of w83781d chip " + "failed at step 4\n"); err = -ENODEV; goto ERROR2; } @@ -1111,9 +1120,9 @@ w83781d_detect(struct i2c_adapter *adapter, int address, int kind) if ((!is_isa) && (((!(val1 & 0x80)) && (val2 == 0xa3)) || ((val1 & 0x80) && (val2 == 0x5c)))) { if (w83781d_read_value - (new_client, W83781D_REG_I2C_ADDR) != address) { - dev_dbg(&new_client->dev, "Detection failed " - "at step 5\n"); + (client, W83781D_REG_I2C_ADDR) != address) { + dev_dbg(&adapter->dev, "Detection of w83781d " + "chip failed at step 5\n"); err = -ENODEV; goto ERROR2; } @@ -1122,27 +1131,26 @@ w83781d_detect(struct i2c_adapter *adapter, int address, int kind) /* We have either had a force parameter, or we have already detected the Winbond. Put it now into bank 0 and Vendor ID High Byte */ - w83781d_write_value(new_client, W83781D_REG_BANK, - (w83781d_read_value(new_client, - W83781D_REG_BANK) & 0x78) | - 0x80); + w83781d_write_value(client, W83781D_REG_BANK, + (w83781d_read_value(client, W83781D_REG_BANK) + & 0x78) | 0x80); /* Determine the chip type. */ if (kind <= 0) { /* get vendor ID */ - val2 = w83781d_read_value(new_client, W83781D_REG_CHIPMAN); + val2 = w83781d_read_value(client, W83781D_REG_CHIPMAN); if (val2 == 0x5c) vendid = winbond; else if (val2 == 0x12) vendid = asus; else { - dev_dbg(&new_client->dev, "Chip was made by neither " - "Winbond nor Asus?\n"); + dev_dbg(&adapter->dev, "w83781d chip vendor is " + "neither Winbond nor Asus\n"); err = -ENODEV; goto ERROR2; } - val1 = w83781d_read_value(new_client, W83781D_REG_WCHIPID); + val1 = w83781d_read_value(client, W83781D_REG_WCHIPID); if ((val1 == 0x10 || val1 == 0x11) && vendid == winbond) kind = w83781d; else if (val1 == 0x30 && vendid == winbond) @@ -1156,10 +1164,9 @@ w83781d_detect(struct i2c_adapter *adapter, int address, int kind) kind = as99127f; else { if (kind == 0) - dev_warn(&new_client->dev, "Ignoring 'force' " + dev_warn(&adapter->dev, "Ignoring 'force' " "parameter for unknown chip at " - "adapter %d, address 0x%02x\n", - i2c_adapter_id(adapter), address); + "address 0x%02x\n", address); err = -EINVAL; goto ERROR2; } @@ -1178,20 +1185,20 @@ w83781d_detect(struct i2c_adapter *adapter, int address, int kind) } /* Fill in the remaining client fields and put into the global list */ - strlcpy(new_client->name, client_name, I2C_NAME_SIZE); + strlcpy(client->name, client_name, I2C_NAME_SIZE); data->type = kind; data->valid = 0; mutex_init(&data->update_lock); /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(new_client))) + if ((err = i2c_attach_client(client))) goto ERROR2; /* attach secondary i2c lm75-like clients */ if (!is_isa) { if ((err = w83781d_detect_subclients(adapter, address, - kind, new_client))) + kind, client))) goto ERROR3; } else { data->lm75[0] = NULL; @@ -1199,11 +1206,11 @@ w83781d_detect(struct i2c_adapter *adapter, int address, int kind) } /* Initialize the chip */ - w83781d_init_client(new_client); + w83781d_init_client(client); /* A few vars need to be filled upon startup */ for (i = 1; i <= 3; i++) { - data->fan_min[i - 1] = w83781d_read_value(new_client, + data->fan_min[i - 1] = w83781d_read_value(client, W83781D_REG_FAN_MIN(i)); } if (kind != w83781d && kind != as99127f) @@ -1211,65 +1218,68 @@ w83781d_detect(struct i2c_adapter *adapter, int address, int kind) data->pwmenable[i] = 1; /* Register sysfs hooks */ - data->class_dev = hwmon_device_register(&new_client->dev); - if (IS_ERR(data->class_dev)) { - err = PTR_ERR(data->class_dev); + if ((err = sysfs_create_group(&dev->kobj, &w83781d_group))) goto ERROR4; - } - device_create_file_in(new_client, 0); - if (kind != w83783s) - device_create_file_in(new_client, 1); - device_create_file_in(new_client, 2); - device_create_file_in(new_client, 3); - device_create_file_in(new_client, 4); - device_create_file_in(new_client, 5); - device_create_file_in(new_client, 6); + if (kind != w83783s) { + if ((err = device_create_file(dev, &dev_attr_in1_input)) + || (err = device_create_file(dev, &dev_attr_in1_min)) + || (err = device_create_file(dev, &dev_attr_in1_max))) + goto ERROR4; + } if (kind != as99127f && kind != w83781d && kind != w83783s) { - device_create_file_in(new_client, 7); - device_create_file_in(new_client, 8); + if ((err = device_create_file(dev, &dev_attr_in7_input)) + || (err = device_create_file(dev, &dev_attr_in7_min)) + || (err = device_create_file(dev, &dev_attr_in7_max)) + || (err = device_create_file(dev, &dev_attr_in8_input)) + || (err = device_create_file(dev, &dev_attr_in8_min)) + || (err = device_create_file(dev, &dev_attr_in8_max))) + goto ERROR4; + } + if (kind != w83783s) { + if ((err = device_create_file(dev, &dev_attr_temp3_input)) + || (err = device_create_file(dev, &dev_attr_temp3_max)) + || (err = device_create_file(dev, + &dev_attr_temp3_max_hyst))) + goto ERROR4; } - - device_create_file_fan(new_client, 1); - device_create_file_fan(new_client, 2); - device_create_file_fan(new_client, 3); - - device_create_file_temp(new_client, 1); - device_create_file_temp(new_client, 2); - if (kind != w83783s) - device_create_file_temp(new_client, 3); - - device_create_file_vid(new_client); - device_create_file_vrm(new_client); - - device_create_file_fan_div(new_client, 1); - device_create_file_fan_div(new_client, 2); - device_create_file_fan_div(new_client, 3); - - device_create_file_alarms(new_client); - - device_create_file_beep(new_client); if (kind != w83781d && kind != as99127f) { - device_create_file_pwm(new_client, 1); - device_create_file_pwm(new_client, 2); - device_create_file_pwmenable(new_client, 2); + if ((err = device_create_file(dev, &dev_attr_pwm1)) + || (err = device_create_file(dev, &dev_attr_pwm2)) + || (err = device_create_file(dev, &dev_attr_pwm2_enable))) + goto ERROR4; } if (kind == w83782d && !is_isa) { - device_create_file_pwm(new_client, 3); - device_create_file_pwm(new_client, 4); + if ((err = device_create_file(dev, &dev_attr_pwm3)) + || (err = device_create_file(dev, &dev_attr_pwm4))) + goto ERROR4; } if (kind != as99127f && kind != w83781d) { - device_create_file_sensor(new_client, 1); - device_create_file_sensor(new_client, 2); - if (kind != w83783s) - device_create_file_sensor(new_client, 3); + if ((err = device_create_file(dev, &dev_attr_temp1_type)) + || (err = device_create_file(dev, + &dev_attr_temp2_type))) + goto ERROR4; + if (kind != w83783s) { + if ((err = device_create_file(dev, + &dev_attr_temp3_type))) + goto ERROR4; + } + } + + data->class_dev = hwmon_device_register(dev); + if (IS_ERR(data->class_dev)) { + err = PTR_ERR(data->class_dev); + goto ERROR4; } return 0; ERROR4: + sysfs_remove_group(&dev->kobj, &w83781d_group); + sysfs_remove_group(&dev->kobj, &w83781d_group_opt); + if (data->lm75[1]) { i2c_detach_client(data->lm75[1]); kfree(data->lm75[1]); @@ -1279,7 +1289,7 @@ ERROR4: kfree(data->lm75[0]); } ERROR3: - i2c_detach_client(new_client); + i2c_detach_client(client); ERROR2: kfree(data); ERROR1: @@ -1296,9 +1306,11 @@ w83781d_detach_client(struct i2c_client *client) int err; /* main client */ - if (data) + if (data) { hwmon_device_unregister(data->class_dev); - + sysfs_remove_group(&client->dev.kobj, &w83781d_group); + sysfs_remove_group(&client->dev.kobj, &w83781d_group_opt); + } if (i2c_is_isa_client(client)) release_region(client->addr, W83781D_EXTENT); @@ -1675,11 +1687,10 @@ sensors_w83781d_init(void) if (res) return res; - res = i2c_isa_add_driver(&w83781d_isa_driver); - if (res) { - i2c_del_driver(&w83781d_driver); - return res; - } + /* Don't exit if this one fails, we still want the I2C variants + to work! */ + if (i2c_isa_add_driver(&w83781d_isa_driver)) + isa_address = 0; return 0; } @@ -1687,7 +1698,8 @@ sensors_w83781d_init(void) static void __exit sensors_w83781d_exit(void) { - i2c_isa_del_driver(&w83781d_isa_driver); + if (isa_address) + i2c_isa_del_driver(&w83781d_isa_driver); i2c_del_driver(&w83781d_driver); } diff --git a/drivers/hwmon/w83791d.c b/drivers/hwmon/w83791d.c index eec43abd57f..9e5f885368b 100644 --- a/drivers/hwmon/w83791d.c +++ b/drivers/hwmon/w83791d.c @@ -27,12 +27,11 @@ The w83791d chip appears to be part way between the 83781d and the 83792d. Thus, this file is derived from both the w83792d.c and - w83781d.c files, but its output is more along the lines of the - 83781d (which means there are no changes to the user-mode sensors - program which treats the 83791d as an 83781d). + w83781d.c files. + + The w83791g chip is the same as the w83791d but lead-free. */ -#include <linux/config.h> #include <linux/module.h> #include <linux/init.h> #include <linux/slab.h> @@ -747,6 +746,52 @@ static ssize_t store_vrm_reg(struct device *dev, static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm_reg, store_vrm_reg); +#define IN_UNIT_ATTRS(X) \ + &sda_in_input[X].dev_attr.attr, \ + &sda_in_min[X].dev_attr.attr, \ + &sda_in_max[X].dev_attr.attr + +#define FAN_UNIT_ATTRS(X) \ + &sda_fan_input[X].dev_attr.attr, \ + &sda_fan_min[X].dev_attr.attr, \ + &sda_fan_div[X].dev_attr.attr + +#define TEMP_UNIT_ATTRS(X) \ + &sda_temp_input[X].dev_attr.attr, \ + &sda_temp_max[X].dev_attr.attr, \ + &sda_temp_max_hyst[X].dev_attr.attr + +static struct attribute *w83791d_attributes[] = { + IN_UNIT_ATTRS(0), + IN_UNIT_ATTRS(1), + IN_UNIT_ATTRS(2), + IN_UNIT_ATTRS(3), + IN_UNIT_ATTRS(4), + IN_UNIT_ATTRS(5), + IN_UNIT_ATTRS(6), + IN_UNIT_ATTRS(7), + IN_UNIT_ATTRS(8), + IN_UNIT_ATTRS(9), + FAN_UNIT_ATTRS(0), + FAN_UNIT_ATTRS(1), + FAN_UNIT_ATTRS(2), + FAN_UNIT_ATTRS(3), + FAN_UNIT_ATTRS(4), + TEMP_UNIT_ATTRS(0), + TEMP_UNIT_ATTRS(1), + TEMP_UNIT_ATTRS(2), + &dev_attr_alarms.attr, + &sda_beep_ctrl[0].dev_attr.attr, + &sda_beep_ctrl[1].dev_attr.attr, + &dev_attr_cpu0_vid.attr, + &dev_attr_vrm.attr, + NULL +}; + +static const struct attribute_group w83791d_group = { + .attrs = w83791d_attributes, +}; + /* This function is called when: * w83791d_driver is inserted (when this module is loaded), for each available adapter @@ -968,41 +1013,20 @@ static int w83791d_detect(struct i2c_adapter *adapter, int address, int kind) } /* Register sysfs hooks */ + if ((err = sysfs_create_group(&client->dev.kobj, &w83791d_group))) + goto error3; + + /* Everything is ready, now register the working device */ data->class_dev = hwmon_device_register(dev); if (IS_ERR(data->class_dev)) { err = PTR_ERR(data->class_dev); - goto error3; - } - - for (i = 0; i < NUMBER_OF_VIN; i++) { - device_create_file(dev, &sda_in_input[i].dev_attr); - device_create_file(dev, &sda_in_min[i].dev_attr); - device_create_file(dev, &sda_in_max[i].dev_attr); + goto error4; } - for (i = 0; i < NUMBER_OF_FANIN; i++) { - device_create_file(dev, &sda_fan_input[i].dev_attr); - device_create_file(dev, &sda_fan_div[i].dev_attr); - device_create_file(dev, &sda_fan_min[i].dev_attr); - } - - for (i = 0; i < NUMBER_OF_TEMPIN; i++) { - device_create_file(dev, &sda_temp_input[i].dev_attr); - device_create_file(dev, &sda_temp_max[i].dev_attr); - device_create_file(dev, &sda_temp_max_hyst[i].dev_attr); - } - - device_create_file(dev, &dev_attr_alarms); - - for (i = 0; i < ARRAY_SIZE(sda_beep_ctrl); i++) { - device_create_file(dev, &sda_beep_ctrl[i].dev_attr); - } - - device_create_file(dev, &dev_attr_cpu0_vid); - device_create_file(dev, &dev_attr_vrm); - return 0; +error4: + sysfs_remove_group(&client->dev.kobj, &w83791d_group); error3: if (data->lm75[0] != NULL) { i2c_detach_client(data->lm75[0]); @@ -1026,8 +1050,10 @@ static int w83791d_detach_client(struct i2c_client *client) int err; /* main client */ - if (data) + if (data) { hwmon_device_unregister(data->class_dev); + sysfs_remove_group(&client->dev.kobj, &w83791d_group); + } if ((err = i2c_detach_client(client))) return err; @@ -1172,6 +1198,7 @@ static struct w83791d_data *w83791d_update_device(struct device *dev) (w83791d_read(client, W83791D_REG_BEEP_CTRL[1]) << 8) + (w83791d_read(client, W83791D_REG_BEEP_CTRL[2]) << 16); + /* Extract global beep enable flag */ data->beep_enable = (data->beep_mask >> GLOBAL_BEEP_ENABLE_SHIFT) & 0x01; diff --git a/drivers/hwmon/w83792d.c b/drivers/hwmon/w83792d.c index 7576ec9426a..4e108262576 100644 --- a/drivers/hwmon/w83792d.c +++ b/drivers/hwmon/w83792d.c @@ -43,6 +43,7 @@ #include <linux/hwmon-sysfs.h> #include <linux/err.h> #include <linux/mutex.h> +#include <linux/sysfs.h> /* Addresses to scan */ static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, 0x2f, I2C_CLIENT_END }; @@ -381,41 +382,6 @@ static ssize_t store_in_##reg (struct device *dev, \ store_in_reg(MIN, min); store_in_reg(MAX, max); -static struct sensor_device_attribute sda_in_input[] = { - SENSOR_ATTR(in0_input, S_IRUGO, show_in, NULL, 0), - SENSOR_ATTR(in1_input, S_IRUGO, show_in, NULL, 1), - SENSOR_ATTR(in2_input, S_IRUGO, show_in, NULL, 2), - SENSOR_ATTR(in3_input, S_IRUGO, show_in, NULL, 3), - SENSOR_ATTR(in4_input, S_IRUGO, show_in, NULL, 4), - SENSOR_ATTR(in5_input, S_IRUGO, show_in, NULL, 5), - SENSOR_ATTR(in6_input, S_IRUGO, show_in, NULL, 6), - SENSOR_ATTR(in7_input, S_IRUGO, show_in, NULL, 7), - SENSOR_ATTR(in8_input, S_IRUGO, show_in, NULL, 8), -}; -static struct sensor_device_attribute sda_in_min[] = { - SENSOR_ATTR(in0_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 0), - SENSOR_ATTR(in1_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 1), - SENSOR_ATTR(in2_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 2), - SENSOR_ATTR(in3_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 3), - SENSOR_ATTR(in4_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 4), - SENSOR_ATTR(in5_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 5), - SENSOR_ATTR(in6_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 6), - SENSOR_ATTR(in7_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 7), - SENSOR_ATTR(in8_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 8), -}; -static struct sensor_device_attribute sda_in_max[] = { - SENSOR_ATTR(in0_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 0), - SENSOR_ATTR(in1_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 1), - SENSOR_ATTR(in2_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 2), - SENSOR_ATTR(in3_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 3), - SENSOR_ATTR(in4_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 4), - SENSOR_ATTR(in5_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 5), - SENSOR_ATTR(in6_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 6), - SENSOR_ATTR(in7_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 7), - SENSOR_ATTR(in8_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 8), -}; - - #define show_fan_reg(reg) \ static ssize_t show_##reg (struct device *dev, struct device_attribute *attr, \ char *buf) \ @@ -499,35 +465,6 @@ store_fan_div(struct device *dev, struct device_attribute *attr, return count; } -static struct sensor_device_attribute sda_fan_input[] = { - SENSOR_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 1), - SENSOR_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 2), - SENSOR_ATTR(fan3_input, S_IRUGO, show_fan, NULL, 3), - SENSOR_ATTR(fan4_input, S_IRUGO, show_fan, NULL, 4), - SENSOR_ATTR(fan5_input, S_IRUGO, show_fan, NULL, 5), - SENSOR_ATTR(fan6_input, S_IRUGO, show_fan, NULL, 6), - SENSOR_ATTR(fan7_input, S_IRUGO, show_fan, NULL, 7), -}; -static struct sensor_device_attribute sda_fan_min[] = { - SENSOR_ATTR(fan1_min, S_IWUSR | S_IRUGO, show_fan_min, store_fan_min, 1), - SENSOR_ATTR(fan2_min, S_IWUSR | S_IRUGO, show_fan_min, store_fan_min, 2), - SENSOR_ATTR(fan3_min, S_IWUSR | S_IRUGO, show_fan_min, store_fan_min, 3), - SENSOR_ATTR(fan4_min, S_IWUSR | S_IRUGO, show_fan_min, store_fan_min, 4), - SENSOR_ATTR(fan5_min, S_IWUSR | S_IRUGO, show_fan_min, store_fan_min, 5), - SENSOR_ATTR(fan6_min, S_IWUSR | S_IRUGO, show_fan_min, store_fan_min, 6), - SENSOR_ATTR(fan7_min, S_IWUSR | S_IRUGO, show_fan_min, store_fan_min, 7), -}; -static struct sensor_device_attribute sda_fan_div[] = { - SENSOR_ATTR(fan1_div, S_IWUSR | S_IRUGO, show_fan_div, store_fan_div, 1), - SENSOR_ATTR(fan2_div, S_IWUSR | S_IRUGO, show_fan_div, store_fan_div, 2), - SENSOR_ATTR(fan3_div, S_IWUSR | S_IRUGO, show_fan_div, store_fan_div, 3), - SENSOR_ATTR(fan4_div, S_IWUSR | S_IRUGO, show_fan_div, store_fan_div, 4), - SENSOR_ATTR(fan5_div, S_IWUSR | S_IRUGO, show_fan_div, store_fan_div, 5), - SENSOR_ATTR(fan6_div, S_IWUSR | S_IRUGO, show_fan_div, store_fan_div, 6), - SENSOR_ATTR(fan7_div, S_IWUSR | S_IRUGO, show_fan_div, store_fan_div, 7), -}; - - /* read/write the temperature1, includes measured value and limits */ static ssize_t show_temp1(struct device *dev, struct device_attribute *attr, @@ -595,24 +532,6 @@ static ssize_t store_temp23(struct device *dev, struct device_attribute *attr, return count; } -static struct sensor_device_attribute_2 sda_temp_input[] = { - SENSOR_ATTR_2(temp1_input, S_IRUGO, show_temp1, NULL, 0, 0), - SENSOR_ATTR_2(temp2_input, S_IRUGO, show_temp23, NULL, 0, 0), - SENSOR_ATTR_2(temp3_input, S_IRUGO, show_temp23, NULL, 1, 0), -}; - -static struct sensor_device_attribute_2 sda_temp_max[] = { - SENSOR_ATTR_2(temp1_max, S_IRUGO | S_IWUSR, show_temp1, store_temp1, 0, 1), - SENSOR_ATTR_2(temp2_max, S_IRUGO | S_IWUSR, show_temp23, store_temp23, 0, 2), - SENSOR_ATTR_2(temp3_max, S_IRUGO | S_IWUSR, show_temp23, store_temp23, 1, 2), -}; - -static struct sensor_device_attribute_2 sda_temp_max_hyst[] = { - SENSOR_ATTR_2(temp1_max_hyst, S_IRUGO | S_IWUSR, show_temp1, store_temp1, 0, 2), - SENSOR_ATTR_2(temp2_max_hyst, S_IRUGO | S_IWUSR, show_temp23, store_temp23, 0, 4), - SENSOR_ATTR_2(temp3_max_hyst, S_IRUGO | S_IWUSR, show_temp23, store_temp23, 1, 4), -}; - /* get reatime status of all sensors items: voltage, temp, fan */ static ssize_t show_alarms_reg(struct device *dev, struct device_attribute *attr, char *buf) @@ -621,9 +540,6 @@ show_alarms_reg(struct device *dev, struct device_attribute *attr, char *buf) return sprintf(buf, "%d\n", data->alarms); } -static -DEVICE_ATTR(alarms, S_IRUGO, show_alarms_reg, NULL); - static ssize_t show_pwm(struct device *dev, struct device_attribute *attr, char *buf) @@ -715,21 +631,6 @@ store_pwmenable(struct device *dev, struct device_attribute *attr, return count; } -static struct sensor_device_attribute sda_pwm[] = { - SENSOR_ATTR(pwm1, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 0), - SENSOR_ATTR(pwm2, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 1), - SENSOR_ATTR(pwm3, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 2), -}; -static struct sensor_device_attribute sda_pwm_enable[] = { - SENSOR_ATTR(pwm1_enable, S_IWUSR | S_IRUGO, - show_pwmenable, store_pwmenable, 1), - SENSOR_ATTR(pwm2_enable, S_IWUSR | S_IRUGO, - show_pwmenable, store_pwmenable, 2), - SENSOR_ATTR(pwm3_enable, S_IWUSR | S_IRUGO, - show_pwmenable, store_pwmenable, 3), -}; - - static ssize_t show_pwm_mode(struct device *dev, struct device_attribute *attr, char *buf) @@ -767,16 +668,6 @@ store_pwm_mode(struct device *dev, struct device_attribute *attr, return count; } -static struct sensor_device_attribute sda_pwm_mode[] = { - SENSOR_ATTR(pwm1_mode, S_IWUSR | S_IRUGO, - show_pwm_mode, store_pwm_mode, 0), - SENSOR_ATTR(pwm2_mode, S_IWUSR | S_IRUGO, - show_pwm_mode, store_pwm_mode, 1), - SENSOR_ATTR(pwm3_mode, S_IWUSR | S_IRUGO, - show_pwm_mode, store_pwm_mode, 2), -}; - - static ssize_t show_regs_chassis(struct device *dev, struct device_attribute *attr, char *buf) @@ -785,8 +676,6 @@ show_regs_chassis(struct device *dev, struct device_attribute *attr, return sprintf(buf, "%d\n", data->chassis); } -static DEVICE_ATTR(chassis, S_IRUGO, show_regs_chassis, NULL); - static ssize_t show_chassis_clear(struct device *dev, struct device_attribute *attr, char *buf) { @@ -815,9 +704,6 @@ store_chassis_clear(struct device *dev, struct device_attribute *attr, return count; } -static DEVICE_ATTR(chassis_clear, S_IRUGO | S_IWUSR, - show_chassis_clear, store_chassis_clear); - /* For Smart Fan I / Thermal Cruise */ static ssize_t show_thermal_cruise(struct device *dev, struct device_attribute *attr, @@ -853,15 +739,6 @@ store_thermal_cruise(struct device *dev, struct device_attribute *attr, return count; } -static struct sensor_device_attribute sda_thermal_cruise[] = { - SENSOR_ATTR(thermal_cruise1, S_IWUSR | S_IRUGO, - show_thermal_cruise, store_thermal_cruise, 1), - SENSOR_ATTR(thermal_cruise2, S_IWUSR | S_IRUGO, - show_thermal_cruise, store_thermal_cruise, 2), - SENSOR_ATTR(thermal_cruise3, S_IWUSR | S_IRUGO, - show_thermal_cruise, store_thermal_cruise, 3), -}; - /* For Smart Fan I/Thermal Cruise and Smart Fan II */ static ssize_t show_tolerance(struct device *dev, struct device_attribute *attr, @@ -901,15 +778,6 @@ store_tolerance(struct device *dev, struct device_attribute *attr, return count; } -static struct sensor_device_attribute sda_tolerance[] = { - SENSOR_ATTR(tolerance1, S_IWUSR | S_IRUGO, - show_tolerance, store_tolerance, 1), - SENSOR_ATTR(tolerance2, S_IWUSR | S_IRUGO, - show_tolerance, store_tolerance, 2), - SENSOR_ATTR(tolerance3, S_IWUSR | S_IRUGO, - show_tolerance, store_tolerance, 3), -}; - /* For Smart Fan II */ static ssize_t show_sf2_point(struct device *dev, struct device_attribute *attr, @@ -946,36 +814,6 @@ store_sf2_point(struct device *dev, struct device_attribute *attr, return count; } -static struct sensor_device_attribute_2 sda_sf2_point[] = { - SENSOR_ATTR_2(sf2_point1_fan1, S_IRUGO | S_IWUSR, - show_sf2_point, store_sf2_point, 1, 1), - SENSOR_ATTR_2(sf2_point2_fan1, S_IRUGO | S_IWUSR, - show_sf2_point, store_sf2_point, 2, 1), - SENSOR_ATTR_2(sf2_point3_fan1, S_IRUGO | S_IWUSR, - show_sf2_point, store_sf2_point, 3, 1), - SENSOR_ATTR_2(sf2_point4_fan1, S_IRUGO | S_IWUSR, - show_sf2_point, store_sf2_point, 4, 1), - - SENSOR_ATTR_2(sf2_point1_fan2, S_IRUGO | S_IWUSR, - show_sf2_point, store_sf2_point, 1, 2), - SENSOR_ATTR_2(sf2_point2_fan2, S_IRUGO | S_IWUSR, - show_sf2_point, store_sf2_point, 2, 2), - SENSOR_ATTR_2(sf2_point3_fan2, S_IRUGO | S_IWUSR, - show_sf2_point, store_sf2_point, 3, 2), - SENSOR_ATTR_2(sf2_point4_fan2, S_IRUGO | S_IWUSR, - show_sf2_point, store_sf2_point, 4, 2), - - SENSOR_ATTR_2(sf2_point1_fan3, S_IRUGO | S_IWUSR, - show_sf2_point, store_sf2_point, 1, 3), - SENSOR_ATTR_2(sf2_point2_fan3, S_IRUGO | S_IWUSR, - show_sf2_point, store_sf2_point, 2, 3), - SENSOR_ATTR_2(sf2_point3_fan3, S_IRUGO | S_IWUSR, - show_sf2_point, store_sf2_point, 3, 3), - SENSOR_ATTR_2(sf2_point4_fan3, S_IRUGO | S_IWUSR, - show_sf2_point, store_sf2_point, 4, 3), -}; - - static ssize_t show_sf2_level(struct device *dev, struct device_attribute *attr, char *buf) @@ -1016,29 +854,6 @@ store_sf2_level(struct device *dev, struct device_attribute *attr, return count; } -static struct sensor_device_attribute_2 sda_sf2_level[] = { - SENSOR_ATTR_2(sf2_level1_fan1, S_IRUGO | S_IWUSR, - show_sf2_level, store_sf2_level, 1, 1), - SENSOR_ATTR_2(sf2_level2_fan1, S_IRUGO | S_IWUSR, - show_sf2_level, store_sf2_level, 2, 1), - SENSOR_ATTR_2(sf2_level3_fan1, S_IRUGO | S_IWUSR, - show_sf2_level, store_sf2_level, 3, 1), - - SENSOR_ATTR_2(sf2_level1_fan2, S_IRUGO | S_IWUSR, - show_sf2_level, store_sf2_level, 1, 2), - SENSOR_ATTR_2(sf2_level2_fan2, S_IRUGO | S_IWUSR, - show_sf2_level, store_sf2_level, 2, 2), - SENSOR_ATTR_2(sf2_level3_fan2, S_IRUGO | S_IWUSR, - show_sf2_level, store_sf2_level, 3, 2), - - SENSOR_ATTR_2(sf2_level1_fan3, S_IRUGO | S_IWUSR, - show_sf2_level, store_sf2_level, 1, 3), - SENSOR_ATTR_2(sf2_level2_fan3, S_IRUGO | S_IWUSR, - show_sf2_level, store_sf2_level, 2, 3), - SENSOR_ATTR_2(sf2_level3_fan3, S_IRUGO | S_IWUSR, - show_sf2_level, store_sf2_level, 3, 3), -}; - /* This function is called when: * w83792d_driver is inserted (when this module is loaded), for each available adapter @@ -1139,12 +954,297 @@ ERROR_SC_0: return err; } -static void device_create_file_fan(struct device *dev, int i) -{ - device_create_file(dev, &sda_fan_input[i].dev_attr); - device_create_file(dev, &sda_fan_div[i].dev_attr); - device_create_file(dev, &sda_fan_min[i].dev_attr); -} +static SENSOR_DEVICE_ATTR(in0_input, S_IRUGO, show_in, NULL, 0); +static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, show_in, NULL, 1); +static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, show_in, NULL, 2); +static SENSOR_DEVICE_ATTR(in3_input, S_IRUGO, show_in, NULL, 3); +static SENSOR_DEVICE_ATTR(in4_input, S_IRUGO, show_in, NULL, 4); +static SENSOR_DEVICE_ATTR(in5_input, S_IRUGO, show_in, NULL, 5); +static SENSOR_DEVICE_ATTR(in6_input, S_IRUGO, show_in, NULL, 6); +static SENSOR_DEVICE_ATTR(in7_input, S_IRUGO, show_in, NULL, 7); +static SENSOR_DEVICE_ATTR(in8_input, S_IRUGO, show_in, NULL, 8); +static SENSOR_DEVICE_ATTR(in0_min, S_IWUSR | S_IRUGO, + show_in_min, store_in_min, 0); +static SENSOR_DEVICE_ATTR(in1_min, S_IWUSR | S_IRUGO, + show_in_min, store_in_min, 1); +static SENSOR_DEVICE_ATTR(in2_min, S_IWUSR | S_IRUGO, + show_in_min, store_in_min, 2); +static SENSOR_DEVICE_ATTR(in3_min, S_IWUSR | S_IRUGO, + show_in_min, store_in_min, 3); +static SENSOR_DEVICE_ATTR(in4_min, S_IWUSR | S_IRUGO, + show_in_min, store_in_min, 4); +static SENSOR_DEVICE_ATTR(in5_min, S_IWUSR | S_IRUGO, + show_in_min, store_in_min, 5); +static SENSOR_DEVICE_ATTR(in6_min, S_IWUSR | S_IRUGO, + show_in_min, store_in_min, 6); +static SENSOR_DEVICE_ATTR(in7_min, S_IWUSR | S_IRUGO, + show_in_min, store_in_min, 7); +static SENSOR_DEVICE_ATTR(in8_min, S_IWUSR | S_IRUGO, + show_in_min, store_in_min, 8); +static SENSOR_DEVICE_ATTR(in0_max, S_IWUSR | S_IRUGO, + show_in_max, store_in_max, 0); +static SENSOR_DEVICE_ATTR(in1_max, S_IWUSR | S_IRUGO, + show_in_max, store_in_max, 1); +static SENSOR_DEVICE_ATTR(in2_max, S_IWUSR | S_IRUGO, + show_in_max, store_in_max, 2); +static SENSOR_DEVICE_ATTR(in3_max, S_IWUSR | S_IRUGO, + show_in_max, store_in_max, 3); +static SENSOR_DEVICE_ATTR(in4_max, S_IWUSR | S_IRUGO, + show_in_max, store_in_max, 4); +static SENSOR_DEVICE_ATTR(in5_max, S_IWUSR | S_IRUGO, + show_in_max, store_in_max, 5); +static SENSOR_DEVICE_ATTR(in6_max, S_IWUSR | S_IRUGO, + show_in_max, store_in_max, 6); +static SENSOR_DEVICE_ATTR(in7_max, S_IWUSR | S_IRUGO, + show_in_max, store_in_max, 7); +static SENSOR_DEVICE_ATTR(in8_max, S_IWUSR | S_IRUGO, + show_in_max, store_in_max, 8); +static SENSOR_DEVICE_ATTR_2(temp1_input, S_IRUGO, show_temp1, NULL, 0, 0); +static SENSOR_DEVICE_ATTR_2(temp2_input, S_IRUGO, show_temp23, NULL, 0, 0); +static SENSOR_DEVICE_ATTR_2(temp3_input, S_IRUGO, show_temp23, NULL, 1, 0); +static SENSOR_DEVICE_ATTR_2(temp1_max, S_IRUGO | S_IWUSR, + show_temp1, store_temp1, 0, 1); +static SENSOR_DEVICE_ATTR_2(temp2_max, S_IRUGO | S_IWUSR, show_temp23, + store_temp23, 0, 2); +static SENSOR_DEVICE_ATTR_2(temp3_max, S_IRUGO | S_IWUSR, show_temp23, + store_temp23, 1, 2); +static SENSOR_DEVICE_ATTR_2(temp1_max_hyst, S_IRUGO | S_IWUSR, + show_temp1, store_temp1, 0, 2); +static SENSOR_DEVICE_ATTR_2(temp2_max_hyst, S_IRUGO | S_IWUSR, + show_temp23, store_temp23, 0, 4); +static SENSOR_DEVICE_ATTR_2(temp3_max_hyst, S_IRUGO | S_IWUSR, + show_temp23, store_temp23, 1, 4); +static DEVICE_ATTR(alarms, S_IRUGO, show_alarms_reg, NULL); +static DEVICE_ATTR(chassis, S_IRUGO, show_regs_chassis, NULL); +static DEVICE_ATTR(chassis_clear, S_IRUGO | S_IWUSR, + show_chassis_clear, store_chassis_clear); +static SENSOR_DEVICE_ATTR(pwm1, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 0); +static SENSOR_DEVICE_ATTR(pwm2, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 1); +static SENSOR_DEVICE_ATTR(pwm3, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 2); +static SENSOR_DEVICE_ATTR(pwm1_enable, S_IWUSR | S_IRUGO, + show_pwmenable, store_pwmenable, 1); +static SENSOR_DEVICE_ATTR(pwm2_enable, S_IWUSR | S_IRUGO, + show_pwmenable, store_pwmenable, 2); +static SENSOR_DEVICE_ATTR(pwm3_enable, S_IWUSR | S_IRUGO, + show_pwmenable, store_pwmenable, 3); +static SENSOR_DEVICE_ATTR(pwm1_mode, S_IWUSR | S_IRUGO, + show_pwm_mode, store_pwm_mode, 0); +static SENSOR_DEVICE_ATTR(pwm2_mode, S_IWUSR | S_IRUGO, + show_pwm_mode, store_pwm_mode, 1); +static SENSOR_DEVICE_ATTR(pwm3_mode, S_IWUSR | S_IRUGO, + show_pwm_mode, store_pwm_mode, 2); +static SENSOR_DEVICE_ATTR(tolerance1, S_IWUSR | S_IRUGO, + show_tolerance, store_tolerance, 1); +static SENSOR_DEVICE_ATTR(tolerance2, S_IWUSR | S_IRUGO, + show_tolerance, store_tolerance, 2); +static SENSOR_DEVICE_ATTR(tolerance3, S_IWUSR | S_IRUGO, + show_tolerance, store_tolerance, 3); +static SENSOR_DEVICE_ATTR(thermal_cruise1, S_IWUSR | S_IRUGO, + show_thermal_cruise, store_thermal_cruise, 1); +static SENSOR_DEVICE_ATTR(thermal_cruise2, S_IWUSR | S_IRUGO, + show_thermal_cruise, store_thermal_cruise, 2); +static SENSOR_DEVICE_ATTR(thermal_cruise3, S_IWUSR | S_IRUGO, + show_thermal_cruise, store_thermal_cruise, 3); +static SENSOR_DEVICE_ATTR_2(sf2_point1_fan1, S_IRUGO | S_IWUSR, + show_sf2_point, store_sf2_point, 1, 1); +static SENSOR_DEVICE_ATTR_2(sf2_point2_fan1, S_IRUGO | S_IWUSR, + show_sf2_point, store_sf2_point, 2, 1); +static SENSOR_DEVICE_ATTR_2(sf2_point3_fan1, S_IRUGO | S_IWUSR, + show_sf2_point, store_sf2_point, 3, 1); +static SENSOR_DEVICE_ATTR_2(sf2_point4_fan1, S_IRUGO | S_IWUSR, + show_sf2_point, store_sf2_point, 4, 1); +static SENSOR_DEVICE_ATTR_2(sf2_point1_fan2, S_IRUGO | S_IWUSR, + show_sf2_point, store_sf2_point, 1, 2); +static SENSOR_DEVICE_ATTR_2(sf2_point2_fan2, S_IRUGO | S_IWUSR, + show_sf2_point, store_sf2_point, 2, 2); +static SENSOR_DEVICE_ATTR_2(sf2_point3_fan2, S_IRUGO | S_IWUSR, + show_sf2_point, store_sf2_point, 3, 2); +static SENSOR_DEVICE_ATTR_2(sf2_point4_fan2, S_IRUGO | S_IWUSR, + show_sf2_point, store_sf2_point, 4, 2); +static SENSOR_DEVICE_ATTR_2(sf2_point1_fan3, S_IRUGO | S_IWUSR, + show_sf2_point, store_sf2_point, 1, 3); +static SENSOR_DEVICE_ATTR_2(sf2_point2_fan3, S_IRUGO | S_IWUSR, + show_sf2_point, store_sf2_point, 2, 3); +static SENSOR_DEVICE_ATTR_2(sf2_point3_fan3, S_IRUGO | S_IWUSR, + show_sf2_point, store_sf2_point, 3, 3); +static SENSOR_DEVICE_ATTR_2(sf2_point4_fan3, S_IRUGO | S_IWUSR, + show_sf2_point, store_sf2_point, 4, 3); +static SENSOR_DEVICE_ATTR_2(sf2_level1_fan1, S_IRUGO | S_IWUSR, + show_sf2_level, store_sf2_level, 1, 1); +static SENSOR_DEVICE_ATTR_2(sf2_level2_fan1, S_IRUGO | S_IWUSR, + show_sf2_level, store_sf2_level, 2, 1); +static SENSOR_DEVICE_ATTR_2(sf2_level3_fan1, S_IRUGO | S_IWUSR, + show_sf2_level, store_sf2_level, 3, 1); +static SENSOR_DEVICE_ATTR_2(sf2_level1_fan2, S_IRUGO | S_IWUSR, + show_sf2_level, store_sf2_level, 1, 2); +static SENSOR_DEVICE_ATTR_2(sf2_level2_fan2, S_IRUGO | S_IWUSR, + show_sf2_level, store_sf2_level, 2, 2); +static SENSOR_DEVICE_ATTR_2(sf2_level3_fan2, S_IRUGO | S_IWUSR, + show_sf2_level, store_sf2_level, 3, 2); +static SENSOR_DEVICE_ATTR_2(sf2_level1_fan3, S_IRUGO | S_IWUSR, + show_sf2_level, store_sf2_level, 1, 3); +static SENSOR_DEVICE_ATTR_2(sf2_level2_fan3, S_IRUGO | S_IWUSR, + show_sf2_level, store_sf2_level, 2, 3); +static SENSOR_DEVICE_ATTR_2(sf2_level3_fan3, S_IRUGO | S_IWUSR, + show_sf2_level, store_sf2_level, 3, 3); +static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 1); +static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 2); +static SENSOR_DEVICE_ATTR(fan3_input, S_IRUGO, show_fan, NULL, 3); +static SENSOR_DEVICE_ATTR(fan4_input, S_IRUGO, show_fan, NULL, 4); +static SENSOR_DEVICE_ATTR(fan5_input, S_IRUGO, show_fan, NULL, 5); +static SENSOR_DEVICE_ATTR(fan6_input, S_IRUGO, show_fan, NULL, 6); +static SENSOR_DEVICE_ATTR(fan7_input, S_IRUGO, show_fan, NULL, 7); +static SENSOR_DEVICE_ATTR(fan1_min, S_IWUSR | S_IRUGO, + show_fan_min, store_fan_min, 1); +static SENSOR_DEVICE_ATTR(fan2_min, S_IWUSR | S_IRUGO, + show_fan_min, store_fan_min, 2); +static SENSOR_DEVICE_ATTR(fan3_min, S_IWUSR | S_IRUGO, + show_fan_min, store_fan_min, 3); +static SENSOR_DEVICE_ATTR(fan4_min, S_IWUSR | S_IRUGO, + show_fan_min, store_fan_min, 4); +static SENSOR_DEVICE_ATTR(fan5_min, S_IWUSR | S_IRUGO, + show_fan_min, store_fan_min, 5); +static SENSOR_DEVICE_ATTR(fan6_min, S_IWUSR | S_IRUGO, + show_fan_min, store_fan_min, 6); +static SENSOR_DEVICE_ATTR(fan7_min, S_IWUSR | S_IRUGO, + show_fan_min, store_fan_min, 7); +static SENSOR_DEVICE_ATTR(fan1_div, S_IWUSR | S_IRUGO, + show_fan_div, store_fan_div, 1); +static SENSOR_DEVICE_ATTR(fan2_div, S_IWUSR | S_IRUGO, + show_fan_div, store_fan_div, 2); +static SENSOR_DEVICE_ATTR(fan3_div, S_IWUSR | S_IRUGO, + show_fan_div, store_fan_div, 3); +static SENSOR_DEVICE_ATTR(fan4_div, S_IWUSR | S_IRUGO, + show_fan_div, store_fan_div, 4); +static SENSOR_DEVICE_ATTR(fan5_div, S_IWUSR | S_IRUGO, + show_fan_div, store_fan_div, 5); +static SENSOR_DEVICE_ATTR(fan6_div, S_IWUSR | S_IRUGO, + show_fan_div, store_fan_div, 6); +static SENSOR_DEVICE_ATTR(fan7_div, S_IWUSR | S_IRUGO, + show_fan_div, store_fan_div, 7); + +static struct attribute *w83792d_attributes_fan[4][4] = { + { + &sensor_dev_attr_fan4_input.dev_attr.attr, + &sensor_dev_attr_fan4_min.dev_attr.attr, + &sensor_dev_attr_fan4_div.dev_attr.attr, + NULL + }, { + &sensor_dev_attr_fan5_input.dev_attr.attr, + &sensor_dev_attr_fan5_min.dev_attr.attr, + &sensor_dev_attr_fan5_div.dev_attr.attr, + NULL + }, { + &sensor_dev_attr_fan6_input.dev_attr.attr, + &sensor_dev_attr_fan6_min.dev_attr.attr, + &sensor_dev_attr_fan6_div.dev_attr.attr, + NULL + }, { + &sensor_dev_attr_fan7_input.dev_attr.attr, + &sensor_dev_attr_fan7_min.dev_attr.attr, + &sensor_dev_attr_fan7_div.dev_attr.attr, + NULL + } +}; + +static const struct attribute_group w83792d_group_fan[4] = { + { .attrs = w83792d_attributes_fan[0] }, + { .attrs = w83792d_attributes_fan[1] }, + { .attrs = w83792d_attributes_fan[2] }, + { .attrs = w83792d_attributes_fan[3] }, +}; + +static struct attribute *w83792d_attributes[] = { + &sensor_dev_attr_in0_input.dev_attr.attr, + &sensor_dev_attr_in0_max.dev_attr.attr, + &sensor_dev_attr_in0_min.dev_attr.attr, + &sensor_dev_attr_in1_input.dev_attr.attr, + &sensor_dev_attr_in1_max.dev_attr.attr, + &sensor_dev_attr_in1_min.dev_attr.attr, + &sensor_dev_attr_in2_input.dev_attr.attr, + &sensor_dev_attr_in2_max.dev_attr.attr, + &sensor_dev_attr_in2_min.dev_attr.attr, + &sensor_dev_attr_in3_input.dev_attr.attr, + &sensor_dev_attr_in3_max.dev_attr.attr, + &sensor_dev_attr_in3_min.dev_attr.attr, + &sensor_dev_attr_in4_input.dev_attr.attr, + &sensor_dev_attr_in4_max.dev_attr.attr, + &sensor_dev_attr_in4_min.dev_attr.attr, + &sensor_dev_attr_in5_input.dev_attr.attr, + &sensor_dev_attr_in5_max.dev_attr.attr, + &sensor_dev_attr_in5_min.dev_attr.attr, + &sensor_dev_attr_in6_input.dev_attr.attr, + &sensor_dev_attr_in6_max.dev_attr.attr, + &sensor_dev_attr_in6_min.dev_attr.attr, + &sensor_dev_attr_in7_input.dev_attr.attr, + &sensor_dev_attr_in7_max.dev_attr.attr, + &sensor_dev_attr_in7_min.dev_attr.attr, + &sensor_dev_attr_in8_input.dev_attr.attr, + &sensor_dev_attr_in8_max.dev_attr.attr, + &sensor_dev_attr_in8_min.dev_attr.attr, + &sensor_dev_attr_temp1_input.dev_attr.attr, + &sensor_dev_attr_temp1_max.dev_attr.attr, + &sensor_dev_attr_temp1_max_hyst.dev_attr.attr, + &sensor_dev_attr_temp2_input.dev_attr.attr, + &sensor_dev_attr_temp2_max.dev_attr.attr, + &sensor_dev_attr_temp2_max_hyst.dev_attr.attr, + &sensor_dev_attr_temp3_input.dev_attr.attr, + &sensor_dev_attr_temp3_max.dev_attr.attr, + &sensor_dev_attr_temp3_max_hyst.dev_attr.attr, + &sensor_dev_attr_pwm1.dev_attr.attr, + &sensor_dev_attr_pwm1_mode.dev_attr.attr, + &sensor_dev_attr_pwm1_enable.dev_attr.attr, + &sensor_dev_attr_pwm2.dev_attr.attr, + &sensor_dev_attr_pwm2_mode.dev_attr.attr, + &sensor_dev_attr_pwm2_enable.dev_attr.attr, + &sensor_dev_attr_pwm3.dev_attr.attr, + &sensor_dev_attr_pwm3_mode.dev_attr.attr, + &sensor_dev_attr_pwm3_enable.dev_attr.attr, + &dev_attr_alarms.attr, + &dev_attr_chassis.attr, + &dev_attr_chassis_clear.attr, + &sensor_dev_attr_tolerance1.dev_attr.attr, + &sensor_dev_attr_thermal_cruise1.dev_attr.attr, + &sensor_dev_attr_tolerance2.dev_attr.attr, + &sensor_dev_attr_thermal_cruise2.dev_attr.attr, + &sensor_dev_attr_tolerance3.dev_attr.attr, + &sensor_dev_attr_thermal_cruise3.dev_attr.attr, + &sensor_dev_attr_sf2_point1_fan1.dev_attr.attr, + &sensor_dev_attr_sf2_point2_fan1.dev_attr.attr, + &sensor_dev_attr_sf2_point3_fan1.dev_attr.attr, + &sensor_dev_attr_sf2_point4_fan1.dev_attr.attr, + &sensor_dev_attr_sf2_point1_fan2.dev_attr.attr, + &sensor_dev_attr_sf2_point2_fan2.dev_attr.attr, + &sensor_dev_attr_sf2_point3_fan2.dev_attr.attr, + &sensor_dev_attr_sf2_point4_fan2.dev_attr.attr, + &sensor_dev_attr_sf2_point1_fan3.dev_attr.attr, + &sensor_dev_attr_sf2_point2_fan3.dev_attr.attr, + &sensor_dev_attr_sf2_point3_fan3.dev_attr.attr, + &sensor_dev_attr_sf2_point4_fan3.dev_attr.attr, + &sensor_dev_attr_sf2_level1_fan1.dev_attr.attr, + &sensor_dev_attr_sf2_level2_fan1.dev_attr.attr, + &sensor_dev_attr_sf2_level3_fan1.dev_attr.attr, + &sensor_dev_attr_sf2_level1_fan2.dev_attr.attr, + &sensor_dev_attr_sf2_level2_fan2.dev_attr.attr, + &sensor_dev_attr_sf2_level3_fan2.dev_attr.attr, + &sensor_dev_attr_sf2_level1_fan3.dev_attr.attr, + &sensor_dev_attr_sf2_level2_fan3.dev_attr.attr, + &sensor_dev_attr_sf2_level3_fan3.dev_attr.attr, + &sensor_dev_attr_fan1_input.dev_attr.attr, + &sensor_dev_attr_fan1_min.dev_attr.attr, + &sensor_dev_attr_fan1_div.dev_attr.attr, + &sensor_dev_attr_fan2_input.dev_attr.attr, + &sensor_dev_attr_fan2_min.dev_attr.attr, + &sensor_dev_attr_fan2_div.dev_attr.attr, + &sensor_dev_attr_fan3_input.dev_attr.attr, + &sensor_dev_attr_fan3_min.dev_attr.attr, + &sensor_dev_attr_fan3_div.dev_attr.attr, + NULL +}; + +static const struct attribute_group w83792d_group = { + .attrs = w83792d_attributes, +}; static int w83792d_detect(struct i2c_adapter *adapter, int address, int kind) @@ -1268,59 +1368,46 @@ w83792d_detect(struct i2c_adapter *adapter, int address, int kind) } /* Register sysfs hooks */ - data->class_dev = hwmon_device_register(dev); - if (IS_ERR(data->class_dev)) { - err = PTR_ERR(data->class_dev); + if ((err = sysfs_create_group(&dev->kobj, &w83792d_group))) goto ERROR3; - } - for (i = 0; i < 9; i++) { - device_create_file(dev, &sda_in_input[i].dev_attr); - device_create_file(dev, &sda_in_max[i].dev_attr); - device_create_file(dev, &sda_in_min[i].dev_attr); - } - for (i = 0; i < 3; i++) - device_create_file_fan(dev, i); /* Read GPIO enable register to check if pins for fan 4,5 are used as GPIO */ val1 = w83792d_read_value(client, W83792D_REG_GPIO_EN); + if (!(val1 & 0x40)) - device_create_file_fan(dev, 3); + if ((err = sysfs_create_group(&dev->kobj, + &w83792d_group_fan[0]))) + goto exit_remove_files; + if (!(val1 & 0x20)) - device_create_file_fan(dev, 4); + if ((err = sysfs_create_group(&dev->kobj, + &w83792d_group_fan[1]))) + goto exit_remove_files; val1 = w83792d_read_value(client, W83792D_REG_PIN); if (val1 & 0x40) - device_create_file_fan(dev, 5); + if ((err = sysfs_create_group(&dev->kobj, + &w83792d_group_fan[2]))) + goto exit_remove_files; + if (val1 & 0x04) - device_create_file_fan(dev, 6); - - for (i = 0; i < 3; i++) { - device_create_file(dev, &sda_temp_input[i].dev_attr); - device_create_file(dev, &sda_temp_max[i].dev_attr); - device_create_file(dev, &sda_temp_max_hyst[i].dev_attr); - device_create_file(dev, &sda_thermal_cruise[i].dev_attr); - device_create_file(dev, &sda_tolerance[i].dev_attr); - } + if ((err = sysfs_create_group(&dev->kobj, + &w83792d_group_fan[3]))) + goto exit_remove_files; - for (i = 0; i < ARRAY_SIZE(sda_pwm); i++) { - device_create_file(dev, &sda_pwm[i].dev_attr); - device_create_file(dev, &sda_pwm_enable[i].dev_attr); - device_create_file(dev, &sda_pwm_mode[i].dev_attr); + data->class_dev = hwmon_device_register(dev); + if (IS_ERR(data->class_dev)) { + err = PTR_ERR(data->class_dev); + goto exit_remove_files; } - device_create_file(dev, &dev_attr_alarms); - device_create_file(dev, &dev_attr_chassis); - device_create_file(dev, &dev_attr_chassis_clear); - - for (i = 0; i < ARRAY_SIZE(sda_sf2_point); i++) - device_create_file(dev, &sda_sf2_point[i].dev_attr); - - for (i = 0; i < ARRAY_SIZE(sda_sf2_level); i++) - device_create_file(dev, &sda_sf2_level[i].dev_attr); - return 0; +exit_remove_files: + sysfs_remove_group(&dev->kobj, &w83792d_group); + for (i = 0; i < ARRAY_SIZE(w83792d_group_fan); i++) + sysfs_remove_group(&dev->kobj, &w83792d_group_fan[i]); ERROR3: if (data->lm75[0] != NULL) { i2c_detach_client(data->lm75[0]); @@ -1342,11 +1429,16 @@ static int w83792d_detach_client(struct i2c_client *client) { struct w83792d_data *data = i2c_get_clientdata(client); - int err; + int err, i; /* main client */ - if (data) + if (data) { hwmon_device_unregister(data->class_dev); + sysfs_remove_group(&client->dev.kobj, &w83792d_group); + for (i = 0; i < ARRAY_SIZE(w83792d_group_fan); i++) + sysfs_remove_group(&client->dev.kobj, + &w83792d_group_fan[i]); + } if ((err = i2c_detach_client(client))) return err; diff --git a/drivers/hwmon/w83l785ts.c b/drivers/hwmon/w83l785ts.c index 3f2bac125fb..a3fcace412f 100644 --- a/drivers/hwmon/w83l785ts.c +++ b/drivers/hwmon/w83l785ts.c @@ -236,21 +236,30 @@ static int w83l785ts_detect(struct i2c_adapter *adapter, int address, int kind) * Nothing yet, assume it is already started. */ + err = device_create_file(&new_client->dev, + &sensor_dev_attr_temp1_input.dev_attr); + if (err) + goto exit_remove; + + err = device_create_file(&new_client->dev, + &sensor_dev_attr_temp1_max.dev_attr); + if (err) + goto exit_remove; + /* Register sysfs hooks */ data->class_dev = hwmon_device_register(&new_client->dev); if (IS_ERR(data->class_dev)) { err = PTR_ERR(data->class_dev); - goto exit_detach; + goto exit_remove; } - device_create_file(&new_client->dev, - &sensor_dev_attr_temp1_input.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_temp1_max.dev_attr); - return 0; -exit_detach: +exit_remove: + device_remove_file(&new_client->dev, + &sensor_dev_attr_temp1_input.dev_attr); + device_remove_file(&new_client->dev, + &sensor_dev_attr_temp1_max.dev_attr); i2c_detach_client(new_client); exit_free: kfree(data); @@ -264,7 +273,10 @@ static int w83l785ts_detach_client(struct i2c_client *client) int err; hwmon_device_unregister(data->class_dev); - + device_remove_file(&client->dev, + &sensor_dev_attr_temp1_input.dev_attr); + device_remove_file(&client->dev, + &sensor_dev_attr_temp1_max.dev_attr); if ((err = i2c_detach_client(client))) return err; |