3 files changed, 34 insertions, 20 deletions

diff --git a/drivers/i2c/algos/i2c-algo-bit.c b/drivers/i2c/algos/i2c-algo-bit.c
index 35812823787..eb8f72ca02f 100644
--- a/drivers/i2c/algos/i2c-algo-bit.c
+++ b/drivers/i2c/algos/i2c-algo-bit.c
@@ -320,7 +320,7 @@ static int try_address(struct i2c_adapter *i2c_adap,
 		       unsigned char addr, int retries)
 {
 	struct i2c_algo_bit_data *adap = i2c_adap->algo_data;
-	int i, ret = -1;
+	int i, ret = 0;
 
 	for (i = 0; i <= retries; i++) {
 		ret = i2c_outb(i2c_adap, addr);
@@ -508,7 +508,7 @@ static int bit_doAddress(struct i2c_adapter *i2c_adap, struct i2c_msg *msg)
 			addr ^= 1;
 		ret = try_address(i2c_adap, addr, retries);
 		if ((ret != 1) && !nak_ok)
-			return -EREMOTEIO;
+			return -ENXIO;
 	}
 
 	return 0;
diff --git a/drivers/i2c/algos/i2c-algo-pca.c b/drivers/i2c/algos/i2c-algo-pca.c
index e954a20b97a..d50b329a3c9 100644
--- a/drivers/i2c/algos/i2c-algo-pca.c
+++ b/drivers/i2c/algos/i2c-algo-pca.c
@@ -182,7 +182,7 @@ static int pca_xfer(struct i2c_adapter *i2c_adap,
 	}
 	if (state != 0xf8) {
 		dev_dbg(&i2c_adap->dev, "bus is not idle. status is %#04x\n", state);
-		return -EIO;
+		return -EAGAIN;
 	}
 
 	DEB1("{{{ XFER %d messages\n", num);
diff --git a/drivers/i2c/algos/i2c-algo-pcf.c b/drivers/i2c/algos/i2c-algo-pcf.c
index 8907b019167..1e328d19cd6 100644
--- a/drivers/i2c/algos/i2c-algo-pcf.c
+++ b/drivers/i2c/algos/i2c-algo-pcf.c
@@ -78,6 +78,36 @@ static void i2c_stop(struct i2c_algo_pcf_data *adap)
 	set_pcf(adap, 1, I2C_PCF_STOP);
 }
 
+static void handle_lab(struct i2c_algo_pcf_data *adap, const int *status)
+{
+	DEB2(printk(KERN_INFO
+		"i2c-algo-pcf.o: lost arbitration (CSR 0x%02x)\n",
+		 *status));
+
+	/* Cleanup from LAB -- reset and enable ESO.
+	 * This resets the PCF8584; since we've lost the bus, no
+	 * further attempts should be made by callers to clean up
+	 * (no i2c_stop() etc.)
+	 */
+	set_pcf(adap, 1, I2C_PCF_PIN);
+	set_pcf(adap, 1, I2C_PCF_ESO);
+
+	/* We pause for a time period sufficient for any running
+	 * I2C transaction to complete -- the arbitration logic won't
+	 * work properly until the next START is seen.
+	 * It is assumed the bus driver or client has set a proper value.
+	 *
+	 * REVISIT: should probably use msleep instead of mdelay if we
+	 * know we can sleep.
+	 */
+	if (adap->lab_mdelay)
+		mdelay(adap->lab_mdelay);
+
+	DEB2(printk(KERN_INFO
+		"i2c-algo-pcf.o: reset LAB condition (CSR 0x%02x)\n",
+		get_pcf(adap, 1)));
+}
+
 static int wait_for_bb(struct i2c_algo_pcf_data *adap) {
 
 	int timeout = DEF_TIMEOUT;
@@ -109,23 +139,7 @@ static int wait_for_pin(struct i2c_algo_pcf_data *adap, int *status) {
 		*status = get_pcf(adap, 1);
 	}
 	if (*status & I2C_PCF_LAB) {
-		DEB2(printk(KERN_INFO 
-			"i2c-algo-pcf.o: lost arbitration (CSR 0x%02x)\n",
-			 *status));
-		/* Cleanup from LAB-- reset and enable ESO.
-		 * This resets the PCF8584; since we've lost the bus, no
-		 * further attempts should be made by callers to clean up 
-		 * (no i2c_stop() etc.)
-		 */
-		set_pcf(adap, 1, I2C_PCF_PIN);
-		set_pcf(adap, 1, I2C_PCF_ESO);
-		/* TODO: we should pause for a time period sufficient for any
-		 * running I2C transaction to complete-- the arbitration
-		 * logic won't work properly until the next START is seen.
-		 */
-		DEB2(printk(KERN_INFO 
-			"i2c-algo-pcf.o: reset LAB condition (CSR 0x%02x)\n", 
-			get_pcf(adap,1)));
+		handle_lab(adap, status);
 		return(-EINTR);
 	}
 #endif