diff options
Diffstat (limited to 'drivers/i2c/busses/i2c-at91.c')
| -rw-r--r-- | drivers/i2c/busses/i2c-at91.c | 667 |
1 files changed, 453 insertions, 214 deletions
diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c index e24484beef0..aa59a254be2 100644 --- a/drivers/i2c/busses/i2c-at91.c +++ b/drivers/i2c/busses/i2c-at91.c @@ -1,315 +1,554 @@ /* - i2c Support for Atmel's AT91 Two-Wire Interface (TWI) - - Copyright (C) 2004 Rick Bronson - Converted to 2.6 by Andrew Victor <andrew@sanpeople.com> - - Borrowed heavily from original work by: - Copyright (C) 2000 Philip Edelbrock <phil@stimpy.netroedge.com> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. -*/ + * i2c Support for Atmel's AT91 Two-Wire Interface (TWI) + * + * Copyright (C) 2011 Weinmann Medical GmbH + * Author: Nikolaus Voss <n.voss@weinmann.de> + * + * Evolved from original work by: + * Copyright (C) 2004 Rick Bronson + * Converted to 2.6 by Andrew Victor <andrew@sanpeople.com> + * + * Borrowed heavily from original work by: + * Copyright (C) 2000 Philip Edelbrock <phil@stimpy.netroedge.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ -#include <linux/module.h> -#include <linux/kernel.h> +#include <linux/clk.h> +#include <linux/completion.h> #include <linux/err.h> -#include <linux/slab.h> -#include <linux/types.h> -#include <linux/delay.h> #include <linux/i2c.h> -#include <linux/init.h> -#include <linux/clk.h> -#include <linux/platform_device.h> +#include <linux/interrupt.h> #include <linux/io.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/of_i2c.h> +#include <linux/platform_device.h> +#include <linux/slab.h> + +#define TWI_CLK_HZ 100000 /* max 400 Kbits/s */ +#define AT91_I2C_TIMEOUT msecs_to_jiffies(100) /* transfer timeout */ + +/* AT91 TWI register definitions */ +#define AT91_TWI_CR 0x0000 /* Control Register */ +#define AT91_TWI_START 0x0001 /* Send a Start Condition */ +#define AT91_TWI_STOP 0x0002 /* Send a Stop Condition */ +#define AT91_TWI_MSEN 0x0004 /* Master Transfer Enable */ +#define AT91_TWI_SVDIS 0x0020 /* Slave Transfer Disable */ +#define AT91_TWI_SWRST 0x0080 /* Software Reset */ + +#define AT91_TWI_MMR 0x0004 /* Master Mode Register */ +#define AT91_TWI_IADRSZ_1 0x0100 /* Internal Device Address Size */ +#define AT91_TWI_MREAD 0x1000 /* Master Read Direction */ + +#define AT91_TWI_IADR 0x000c /* Internal Address Register */ + +#define AT91_TWI_CWGR 0x0010 /* Clock Waveform Generator Reg */ + +#define AT91_TWI_SR 0x0020 /* Status Register */ +#define AT91_TWI_TXCOMP 0x0001 /* Transmission Complete */ +#define AT91_TWI_RXRDY 0x0002 /* Receive Holding Register Ready */ +#define AT91_TWI_TXRDY 0x0004 /* Transmit Holding Register Ready */ -#include <mach/at91_twi.h> -#include <mach/board.h> -#include <mach/cpu.h> +#define AT91_TWI_OVRE 0x0040 /* Overrun Error */ +#define AT91_TWI_UNRE 0x0080 /* Underrun Error */ +#define AT91_TWI_NACK 0x0100 /* Not Acknowledged */ -#define TWI_CLOCK 100000 /* Hz. max 400 Kbits/sec */ +#define AT91_TWI_IER 0x0024 /* Interrupt Enable Register */ +#define AT91_TWI_IDR 0x0028 /* Interrupt Disable Register */ +#define AT91_TWI_IMR 0x002c /* Interrupt Mask Register */ +#define AT91_TWI_RHR 0x0030 /* Receive Holding Register */ +#define AT91_TWI_THR 0x0034 /* Transmit Holding Register */ +struct at91_twi_pdata { + unsigned clk_max_div; + unsigned clk_offset; + bool has_unre_flag; +}; + +struct at91_twi_dev { + struct device *dev; + void __iomem *base; + struct completion cmd_complete; + struct clk *clk; + u8 *buf; + size_t buf_len; + struct i2c_msg *msg; + int irq; + unsigned transfer_status; + struct i2c_adapter adapter; + unsigned twi_cwgr_reg; + struct at91_twi_pdata *pdata; +}; -static struct clk *twi_clk; -static void __iomem *twi_base; +static unsigned at91_twi_read(struct at91_twi_dev *dev, unsigned reg) +{ + return readl_relaxed(dev->base + reg); +} + +static void at91_twi_write(struct at91_twi_dev *dev, unsigned reg, unsigned val) +{ + writel_relaxed(val, dev->base + reg); +} -#define at91_twi_read(reg) __raw_readl(twi_base + (reg)) -#define at91_twi_write(reg, val) __raw_writel((val), twi_base + (reg)) +static void at91_disable_twi_interrupts(struct at91_twi_dev *dev) +{ + at91_twi_write(dev, AT91_TWI_IDR, + AT91_TWI_TXCOMP | AT91_TWI_RXRDY | AT91_TWI_TXRDY); +} +static void at91_init_twi_bus(struct at91_twi_dev *dev) +{ + at91_disable_twi_interrupts(dev); + at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_SWRST); + at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_MSEN); + at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_SVDIS); + at91_twi_write(dev, AT91_TWI_CWGR, dev->twi_cwgr_reg); +} /* - * Initialize the TWI hardware registers. + * Calculate symmetric clock as stated in datasheet: + * twi_clk = F_MAIN / (2 * (cdiv * (1 << ckdiv) + offset)) */ -static void __devinit at91_twi_hwinit(void) +static void __devinit at91_calc_twi_clock(struct at91_twi_dev *dev, int twi_clk) { - unsigned long cdiv, ckdiv; - - at91_twi_write(AT91_TWI_IDR, 0xffffffff); /* Disable all interrupts */ - at91_twi_write(AT91_TWI_CR, AT91_TWI_SWRST); /* Reset peripheral */ - at91_twi_write(AT91_TWI_CR, AT91_TWI_MSEN); /* Set Master mode */ - - /* Calcuate clock dividers */ - cdiv = (clk_get_rate(twi_clk) / (2 * TWI_CLOCK)) - 3; - cdiv = cdiv + 1; /* round up */ - ckdiv = 0; - while (cdiv > 255) { - ckdiv++; - cdiv = cdiv >> 1; + int ckdiv, cdiv, div; + struct at91_twi_pdata *pdata = dev->pdata; + int offset = pdata->clk_offset; + int max_ckdiv = pdata->clk_max_div; + + div = max(0, (int)DIV_ROUND_UP(clk_get_rate(dev->clk), + 2 * twi_clk) - offset); + ckdiv = fls(div >> 8); + cdiv = div >> ckdiv; + + if (ckdiv > max_ckdiv) { + dev_warn(dev->dev, "%d exceeds ckdiv max value which is %d.\n", + ckdiv, max_ckdiv); + ckdiv = max_ckdiv; + cdiv = 255; } - if (cpu_is_at91rm9200()) { /* AT91RM9200 Errata #22 */ - if (ckdiv > 5) { - printk(KERN_ERR "AT91 I2C: Invalid TWI_CLOCK value!\n"); - ckdiv = 5; - } - } + dev->twi_cwgr_reg = (ckdiv << 16) | (cdiv << 8) | cdiv; + dev_dbg(dev->dev, "cdiv %d ckdiv %d\n", cdiv, ckdiv); +} - at91_twi_write(AT91_TWI_CWGR, (ckdiv << 16) | (cdiv << 8) | cdiv); +static void at91_twi_write_next_byte(struct at91_twi_dev *dev) +{ + if (dev->buf_len <= 0) + return; + + at91_twi_write(dev, AT91_TWI_THR, *dev->buf); + + /* send stop when last byte has been written */ + if (--dev->buf_len == 0) + at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_STOP); + + dev_dbg(dev->dev, "wrote 0x%x, to go %d\n", *dev->buf, dev->buf_len); + + ++dev->buf; } -/* - * Poll the i2c status register until the specified bit is set. - * Returns 0 if timed out (100 msec). - */ -static short at91_poll_status(unsigned long bit) +static void at91_twi_read_next_byte(struct at91_twi_dev *dev) { - int loop_cntr = 10000; + if (dev->buf_len <= 0) + return; + + *dev->buf = at91_twi_read(dev, AT91_TWI_RHR) & 0xff; + --dev->buf_len; + + /* handle I2C_SMBUS_BLOCK_DATA */ + if (unlikely(dev->msg->flags & I2C_M_RECV_LEN)) { + dev->msg->flags &= ~I2C_M_RECV_LEN; + dev->buf_len += *dev->buf; + dev->msg->len = dev->buf_len + 1; + dev_dbg(dev->dev, "received block length %d\n", dev->buf_len); + } + + /* send stop if second but last byte has been read */ + if (dev->buf_len == 1) + at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_STOP); - do { - udelay(10); - } while (!(at91_twi_read(AT91_TWI_SR) & bit) && (--loop_cntr > 0)); + dev_dbg(dev->dev, "read 0x%x, to go %d\n", *dev->buf, dev->buf_len); - return (loop_cntr > 0); + ++dev->buf; } -static int xfer_read(struct i2c_adapter *adap, unsigned char *buf, int length) +static irqreturn_t atmel_twi_interrupt(int irq, void *dev_id) { - /* Send Start */ - at91_twi_write(AT91_TWI_CR, AT91_TWI_START); - - /* Read data */ - while (length--) { - if (!length) /* need to send Stop before reading last byte */ - at91_twi_write(AT91_TWI_CR, AT91_TWI_STOP); - if (!at91_poll_status(AT91_TWI_RXRDY)) { - dev_dbg(&adap->dev, "RXRDY timeout\n"); - return -ETIMEDOUT; - } - *buf++ = (at91_twi_read(AT91_TWI_RHR) & 0xff); + struct at91_twi_dev *dev = dev_id; + const unsigned status = at91_twi_read(dev, AT91_TWI_SR); + const unsigned irqstatus = status & at91_twi_read(dev, AT91_TWI_IMR); + + if (!irqstatus) + return IRQ_NONE; + else if (irqstatus & AT91_TWI_RXRDY) + at91_twi_read_next_byte(dev); + else if (irqstatus & AT91_TWI_TXRDY) + at91_twi_write_next_byte(dev); + + /* catch error flags */ + dev->transfer_status |= status; + + if (irqstatus & AT91_TWI_TXCOMP) { + at91_disable_twi_interrupts(dev); + complete(&dev->cmd_complete); } - return 0; + return IRQ_HANDLED; } -static int xfer_write(struct i2c_adapter *adap, unsigned char *buf, int length) +static int at91_do_twi_transfer(struct at91_twi_dev *dev) { - /* Load first byte into transmitter */ - at91_twi_write(AT91_TWI_THR, *buf++); + int ret; + bool has_unre_flag = dev->pdata->has_unre_flag; - /* Send Start */ - at91_twi_write(AT91_TWI_CR, AT91_TWI_START); + dev_dbg(dev->dev, "transfer: %s %d bytes.\n", + (dev->msg->flags & I2C_M_RD) ? "read" : "write", dev->buf_len); - do { - if (!at91_poll_status(AT91_TWI_TXRDY)) { - dev_dbg(&adap->dev, "TXRDY timeout\n"); - return -ETIMEDOUT; - } + INIT_COMPLETION(dev->cmd_complete); + dev->transfer_status = 0; + if (dev->msg->flags & I2C_M_RD) { + unsigned start_flags = AT91_TWI_START; - length--; /* byte was transmitted */ + if (at91_twi_read(dev, AT91_TWI_SR) & AT91_TWI_RXRDY) { + dev_err(dev->dev, "RXRDY still set!"); + at91_twi_read(dev, AT91_TWI_RHR); + } - if (length > 0) /* more data to send? */ - at91_twi_write(AT91_TWI_THR, *buf++); - } while (length); + /* if only one byte is to be read, immediately stop transfer */ + if (dev->buf_len <= 1 && !(dev->msg->flags & I2C_M_RECV_LEN)) + start_flags |= AT91_TWI_STOP; + at91_twi_write(dev, AT91_TWI_CR, start_flags); + at91_twi_write(dev, AT91_TWI_IER, + AT91_TWI_TXCOMP | AT91_TWI_RXRDY); + } else { + at91_twi_write_next_byte(dev); + at91_twi_write(dev, AT91_TWI_IER, + AT91_TWI_TXCOMP | AT91_TWI_TXRDY); + } - /* Send Stop */ - at91_twi_write(AT91_TWI_CR, AT91_TWI_STOP); + ret = wait_for_completion_interruptible_timeout(&dev->cmd_complete, + dev->adapter.timeout); + if (ret == 0) { + dev_err(dev->dev, "controller timed out\n"); + at91_init_twi_bus(dev); + return -ETIMEDOUT; + } + if (dev->transfer_status & AT91_TWI_NACK) { + dev_dbg(dev->dev, "received nack\n"); + return -EREMOTEIO; + } + if (dev->transfer_status & AT91_TWI_OVRE) { + dev_err(dev->dev, "overrun while reading\n"); + return -EIO; + } + if (has_unre_flag && dev->transfer_status & AT91_TWI_UNRE) { + dev_err(dev->dev, "underrun while writing\n"); + return -EIO; + } + dev_dbg(dev->dev, "transfer complete\n"); return 0; } -/* - * Generic i2c master transfer entrypoint. - * - * Note: We do not use Atmel's feature of storing the "internal device address". - * Instead the "internal device address" has to be written using a separate - * i2c message. - * http://lists.arm.linux.org.uk/pipermail/linux-arm-kernel/2004-September/024411.html - */ -static int at91_xfer(struct i2c_adapter *adap, struct i2c_msg *pmsg, int num) +static int at91_twi_xfer(struct i2c_adapter *adap, struct i2c_msg *msg, int num) { - int i, ret; + struct at91_twi_dev *dev = i2c_get_adapdata(adap); + int ret; + unsigned int_addr_flag = 0; + struct i2c_msg *m_start = msg; dev_dbg(&adap->dev, "at91_xfer: processing %d messages:\n", num); - for (i = 0; i < num; i++) { - dev_dbg(&adap->dev, " #%d: %sing %d byte%s %s 0x%02x\n", i, - pmsg->flags & I2C_M_RD ? "read" : "writ", - pmsg->len, pmsg->len > 1 ? "s" : "", - pmsg->flags & I2C_M_RD ? "from" : "to", pmsg->addr); - - at91_twi_write(AT91_TWI_MMR, (pmsg->addr << 16) - | ((pmsg->flags & I2C_M_RD) ? AT91_TWI_MREAD : 0)); - - if (pmsg->len && pmsg->buf) { /* sanity check */ - if (pmsg->flags & I2C_M_RD) - ret = xfer_read(adap, pmsg->buf, pmsg->len); - else - ret = xfer_write(adap, pmsg->buf, pmsg->len); - - if (ret) - return ret; - - /* Wait until transfer is finished */ - if (!at91_poll_status(AT91_TWI_TXCOMP)) { - dev_dbg(&adap->dev, "TXCOMP timeout\n"); - return -ETIMEDOUT; - } + /* + * The hardware can handle at most two messages concatenated by a + * repeated start via it's internal address feature. + */ + if (num > 2) { + dev_err(dev->dev, + "cannot handle more than two concatenated messages.\n"); + return 0; + } else if (num == 2) { + int internal_address = 0; + int i; + + if (msg->flags & I2C_M_RD) { + dev_err(dev->dev, "first transfer must be write.\n"); + return -EINVAL; } - dev_dbg(&adap->dev, "transfer complete\n"); - pmsg++; /* next message */ + if (msg->len > 3) { + dev_err(dev->dev, "first message size must be <= 3.\n"); + return -EINVAL; + } + + /* 1st msg is put into the internal address, start with 2nd */ + m_start = &msg[1]; + for (i = 0; i < msg->len; ++i) { + const unsigned addr = msg->buf[msg->len - 1 - i]; + + internal_address |= addr << (8 * i); + int_addr_flag += AT91_TWI_IADRSZ_1; + } + at91_twi_write(dev, AT91_TWI_IADR, internal_address); } - return i; + + at91_twi_write(dev, AT91_TWI_MMR, (m_start->addr << 16) | int_addr_flag + | ((m_start->flags & I2C_M_RD) ? AT91_TWI_MREAD : 0)); + + dev->buf_len = m_start->len; + dev->buf = m_start->buf; + dev->msg = m_start; + + ret = at91_do_twi_transfer(dev); + + return (ret < 0) ? ret : num; } -/* - * Return list of supported functionality. - */ -static u32 at91_func(struct i2c_adapter *adapter) +static u32 at91_twi_func(struct i2c_adapter *adapter) { - return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL + | I2C_FUNC_SMBUS_READ_BLOCK_DATA; } -static struct i2c_algorithm at91_algorithm = { - .master_xfer = at91_xfer, - .functionality = at91_func, +static struct i2c_algorithm at91_twi_algorithm = { + .master_xfer = at91_twi_xfer, + .functionality = at91_twi_func, }; -/* - * Main initialization routine. - */ -static int __devinit at91_i2c_probe(struct platform_device *pdev) -{ - struct i2c_adapter *adapter; - struct resource *res; - int rc; +static struct at91_twi_pdata at91rm9200_config = { + .clk_max_div = 5, + .clk_offset = 3, + .has_unre_flag = true, +}; - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) - return -ENXIO; +static struct at91_twi_pdata at91sam9261_config = { + .clk_max_div = 5, + .clk_offset = 4, + .has_unre_flag = false, +}; - if (!request_mem_region(res->start, resource_size(res), "at91_i2c")) - return -EBUSY; +static struct at91_twi_pdata at91sam9260_config = { + .clk_max_div = 7, + .clk_offset = 4, + .has_unre_flag = false, +}; + +static struct at91_twi_pdata at91sam9g20_config = { + .clk_max_div = 7, + .clk_offset = 4, + .has_unre_flag = false, +}; + +static struct at91_twi_pdata at91sam9g10_config = { + .clk_max_div = 7, + .clk_offset = 4, + .has_unre_flag = false, +}; - twi_base = ioremap(res->start, resource_size(res)); - if (!twi_base) { - rc = -ENOMEM; - goto fail0; +static struct at91_twi_pdata at91sam9x5_config = { + .clk_max_div = 7, + .clk_offset = 4, + .has_unre_flag = false, +}; + +static const struct platform_device_id at91_twi_devtypes[] = { + { + .name = "i2c-at91rm9200", + .driver_data = (unsigned long) &at91rm9200_config, + }, { + .name = "i2c-at91sam9261", + .driver_data = (unsigned long) &at91sam9261_config, + }, { + .name = "i2c-at91sam9260", + .driver_data = (unsigned long) &at91sam9260_config, + }, { + .name = "i2c-at91sam9g20", + .driver_data = (unsigned long) &at91sam9g20_config, + }, { + .name = "i2c-at91sam9g10", + .driver_data = (unsigned long) &at91sam9g10_config, + }, { + /* sentinel */ } +}; - twi_clk = clk_get(NULL, "twi_clk"); - if (IS_ERR(twi_clk)) { - dev_err(&pdev->dev, "no clock defined\n"); - rc = -ENODEV; - goto fail1; +#if defined(CONFIG_OF) +static const struct of_device_id atmel_twi_dt_ids[] = { + { + .compatible = "atmel,at91sam9260-i2c", + .data = &at91sam9260_config, + } , { + .compatible = "atmel,at91sam9g20-i2c", + .data = &at91sam9g20_config, + } , { + .compatible = "atmel,at91sam9g10-i2c", + .data = &at91sam9g10_config, + }, { + .compatible = "atmel,at91sam9x5-i2c", + .data = &at91sam9x5_config, + }, { + /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, atmel_twi_dt_ids); +#else +#define atmel_twi_dt_ids NULL +#endif - adapter = kzalloc(sizeof(struct i2c_adapter), GFP_KERNEL); - if (adapter == NULL) { - dev_err(&pdev->dev, "can't allocate inteface!\n"); - rc = -ENOMEM; - goto fail2; +static struct at91_twi_pdata * __devinit at91_twi_get_driver_data( + struct platform_device *pdev) +{ + if (pdev->dev.of_node) { + const struct of_device_id *match; + match = of_match_node(atmel_twi_dt_ids, pdev->dev.of_node); + if (!match) + return NULL; + return match->data; } - snprintf(adapter->name, sizeof(adapter->name), "AT91"); - adapter->algo = &at91_algorithm; - adapter->class = I2C_CLASS_HWMON; - adapter->dev.parent = &pdev->dev; - /* adapter->id == 0 ... only one TWI controller for now */ + return (struct at91_twi_pdata *) platform_get_device_id(pdev)->driver_data; +} + +static int __devinit at91_twi_probe(struct platform_device *pdev) +{ + struct at91_twi_dev *dev; + struct resource *mem; + int rc; + + dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL); + if (!dev) + return -ENOMEM; + init_completion(&dev->cmd_complete); + dev->dev = &pdev->dev; + + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!mem) + return -ENODEV; + + dev->pdata = at91_twi_get_driver_data(pdev); + if (!dev->pdata) + return -ENODEV; - platform_set_drvdata(pdev, adapter); + dev->base = devm_request_and_ioremap(&pdev->dev, mem); + if (!dev->base) + return -EBUSY; - clk_enable(twi_clk); /* enable peripheral clock */ - at91_twi_hwinit(); /* initialize TWI controller */ + dev->irq = platform_get_irq(pdev, 0); + if (dev->irq < 0) + return dev->irq; - rc = i2c_add_numbered_adapter(adapter); + rc = devm_request_irq(&pdev->dev, dev->irq, atmel_twi_interrupt, 0, + dev_name(dev->dev), dev); if (rc) { - dev_err(&pdev->dev, "Adapter %s registration failed\n", - adapter->name); - goto fail3; + dev_err(dev->dev, "Cannot get irq %d: %d\n", dev->irq, rc); + return rc; } - dev_info(&pdev->dev, "AT91 i2c bus driver.\n"); - return 0; + platform_set_drvdata(pdev, dev); -fail3: - platform_set_drvdata(pdev, NULL); - kfree(adapter); - clk_disable(twi_clk); -fail2: - clk_put(twi_clk); -fail1: - iounmap(twi_base); -fail0: - release_mem_region(res->start, resource_size(res)); + dev->clk = devm_clk_get(dev->dev, NULL); + if (IS_ERR(dev->clk)) { + dev_err(dev->dev, "no clock defined\n"); + return -ENODEV; + } + clk_prepare_enable(dev->clk); + + at91_calc_twi_clock(dev, TWI_CLK_HZ); + at91_init_twi_bus(dev); + + snprintf(dev->adapter.name, sizeof(dev->adapter.name), "AT91"); + i2c_set_adapdata(&dev->adapter, dev); + dev->adapter.owner = THIS_MODULE; + dev->adapter.class = I2C_CLASS_HWMON; + dev->adapter.algo = &at91_twi_algorithm; + dev->adapter.dev.parent = dev->dev; + dev->adapter.nr = pdev->id; + dev->adapter.timeout = AT91_I2C_TIMEOUT; + dev->adapter.dev.of_node = pdev->dev.of_node; + + rc = i2c_add_numbered_adapter(&dev->adapter); + if (rc) { + dev_err(dev->dev, "Adapter %s registration failed\n", + dev->adapter.name); + clk_disable_unprepare(dev->clk); + return rc; + } - return rc; + of_i2c_register_devices(&dev->adapter); + + dev_info(dev->dev, "AT91 i2c bus driver.\n"); + return 0; } -static int __devexit at91_i2c_remove(struct platform_device *pdev) +static int __devexit at91_twi_remove(struct platform_device *pdev) { - struct i2c_adapter *adapter = platform_get_drvdata(pdev); - struct resource *res; + struct at91_twi_dev *dev = platform_get_drvdata(pdev); int rc; - rc = i2c_del_adapter(adapter); - platform_set_drvdata(pdev, NULL); - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - iounmap(twi_base); - release_mem_region(res->start, resource_size(res)); - - clk_disable(twi_clk); /* disable peripheral clock */ - clk_put(twi_clk); + rc = i2c_del_adapter(&dev->adapter); + clk_disable_unprepare(dev->clk); return rc; } #ifdef CONFIG_PM -/* NOTE: could save a few mA by keeping clock off outside of at91_xfer... */ - -static int at91_i2c_suspend(struct device *dev) +static int at91_twi_runtime_suspend(struct device *dev) { - clk_disable(twi_clk); + struct at91_twi_dev *twi_dev = dev_get_drvdata(dev); + + clk_disable(twi_dev->clk); + return 0; } -static int at91_i2c_resume(struct device *dev) +static int at91_twi_runtime_resume(struct device *dev) { - return clk_enable(twi_clk); + struct at91_twi_dev *twi_dev = dev_get_drvdata(dev); + + return clk_enable(twi_dev->clk); } -static SIMPLE_DEV_PM_OPS(at91_i2c_pm, at91_i2c_suspend, at91_i2c_resume); -#define AT91_I2C_PM (&at91_i2c_pm) +static const struct dev_pm_ops at91_twi_pm = { + .runtime_suspend = at91_twi_runtime_suspend, + .runtime_resume = at91_twi_runtime_resume, +}; +#define at91_twi_pm_ops (&at91_twi_pm) #else -#define AT91_I2C_PM NULL +#define at91_twi_pm_ops NULL #endif -static struct platform_driver at91_i2c_driver = { - .probe = at91_i2c_probe, - .remove = __devexit_p(at91_i2c_remove), +static struct platform_driver at91_twi_driver = { + .probe = at91_twi_probe, + .remove = __devexit_p(at91_twi_remove), + .id_table = at91_twi_devtypes, .driver = { .name = "at91_i2c", .owner = THIS_MODULE, - .pm = AT91_I2C_PM, + .of_match_table = atmel_twi_dt_ids, + .pm = at91_twi_pm_ops, }, }; -module_platform_driver(at91_i2c_driver); +static int __init at91_twi_init(void) +{ + return platform_driver_register(&at91_twi_driver); +} + +static void __exit at91_twi_exit(void) +{ + platform_driver_unregister(&at91_twi_driver); +} + +subsys_initcall(at91_twi_init); +module_exit(at91_twi_exit); -MODULE_AUTHOR("Rick Bronson"); +MODULE_AUTHOR("Nikolaus Voss <n.voss@weinmann.de>"); MODULE_DESCRIPTION("I2C (TWI) driver for Atmel AT91"); MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:at91_i2c"); |