summaryrefslogtreecommitdiffstats
path: root/drivers/i2c/busses/i2c-sis630.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/i2c/busses/i2c-sis630.c')
-rw-r--r--drivers/i2c/busses/i2c-sis630.c360
1 files changed, 201 insertions, 159 deletions
diff --git a/drivers/i2c/busses/i2c-sis630.c b/drivers/i2c/busses/i2c-sis630.c
index de6dddb9f86..36a9556d7cf 100644
--- a/drivers/i2c/busses/i2c-sis630.c
+++ b/drivers/i2c/busses/i2c-sis630.c
@@ -17,30 +17,25 @@
*/
/*
- Changes:
- 24.08.2002
- Fixed the typo in sis630_access (Thanks to Mark M. Hoffman)
- Changed sis630_transaction.(Thanks to Mark M. Hoffman)
- 18.09.2002
- Added SIS730 as supported.
- 21.09.2002
- Added high_clock module option.If this option is set
- used Host Master Clock 56KHz (default 14KHz).For now we save old Host
- Master Clock and after transaction completed restore (otherwise
- it's confuse BIOS and hung Machine).
- 24.09.2002
- Fixed typo in sis630_access
- Fixed logical error by restoring of Host Master Clock
- 31.07.2003
- Added block data read/write support.
-*/
-
-/*
Status: beta
Supports:
SIS 630
SIS 730
+ SIS 964
+
+ Notable differences between chips:
+ +------------------------+--------------------+-------------------+
+ | | SIS630/730 | SIS964 |
+ +------------------------+--------------------+-------------------+
+ | Clock | 14kHz/56kHz | 55.56kHz/27.78kHz |
+ | SMBus registers offset | 0x80 | 0xE0 |
+ | SMB_CNT | Bit 1 = Slave Busy | Bit 1 = Bus probe |
+ | (not used yet) | Bit 3 is reserved | Bit 3 = Last byte |
+ | SMB_PCOUNT | Offset + 0x06 | Offset + 0x14 |
+ | SMB_COUNT | 4:0 bits | 5:0 bits |
+ +------------------------+--------------------+-------------------+
+ (Other differences don't affect the functions provided by the driver)
Note: we assume there can only be one device, with one SMBus interface.
*/
@@ -55,22 +50,36 @@
#include <linux/acpi.h>
#include <linux/io.h>
-/* SIS630 SMBus registers */
-#define SMB_STS 0x80 /* status */
-#define SMB_EN 0x81 /* status enable */
-#define SMB_CNT 0x82
-#define SMBHOST_CNT 0x83
-#define SMB_ADDR 0x84
-#define SMB_CMD 0x85
-#define SMB_PCOUNT 0x86 /* processed count */
-#define SMB_COUNT 0x87
-#define SMB_BYTE 0x88 /* ~0x8F data byte field */
-#define SMBDEV_ADDR 0x90
-#define SMB_DB0 0x91
-#define SMB_DB1 0x92
-#define SMB_SAA 0x93
-
-/* register count for request_region */
+/* SIS964 id is defined here as we are the only file using it */
+#define PCI_DEVICE_ID_SI_964 0x0964
+
+/* SIS630/730/964 SMBus registers */
+#define SMB_STS 0x00 /* status */
+#define SMB_CNT 0x02 /* control */
+#define SMBHOST_CNT 0x03 /* host control */
+#define SMB_ADDR 0x04 /* address */
+#define SMB_CMD 0x05 /* command */
+#define SMB_COUNT 0x07 /* byte count */
+#define SMB_BYTE 0x08 /* ~0x8F data byte field */
+
+/* SMB_STS register */
+#define BYTE_DONE_STS 0x10 /* Byte Done Status / Block Array */
+#define SMBCOL_STS 0x04 /* Collision */
+#define SMBERR_STS 0x02 /* Device error */
+
+/* SMB_CNT register */
+#define MSTO_EN 0x40 /* Host Master Timeout Enable */
+#define SMBCLK_SEL 0x20 /* Host master clock selection */
+#define SMB_PROBE 0x02 /* Bus Probe/Slave busy */
+#define SMB_HOSTBUSY 0x01 /* Host Busy */
+
+/* SMBHOST_CNT register */
+#define SMB_KILL 0x20 /* Kill */
+#define SMB_START 0x10 /* Start */
+
+/* register count for request_region
+ * As we don't use SMB_PCOUNT, 20 is ok for SiS630 and SiS964
+ */
#define SIS630_SMB_IOREGION 20
/* PCI address constants */
@@ -96,65 +105,71 @@ static struct pci_driver sis630_driver;
static bool high_clock;
static bool force;
module_param(high_clock, bool, 0);
-MODULE_PARM_DESC(high_clock, "Set Host Master Clock to 56KHz (default 14KHz).");
+MODULE_PARM_DESC(high_clock,
+ "Set Host Master Clock to 56KHz (default 14KHz) (SIS630/730 only).");
module_param(force, bool, 0);
MODULE_PARM_DESC(force, "Forcibly enable the SIS630. DANGEROUS!");
-/* acpi base address */
-static unsigned short acpi_base;
+/* SMBus base adress */
+static unsigned short smbus_base;
/* supported chips */
static int supported[] = {
PCI_DEVICE_ID_SI_630,
PCI_DEVICE_ID_SI_730,
+ PCI_DEVICE_ID_SI_760,
0 /* terminates the list */
};
static inline u8 sis630_read(u8 reg)
{
- return inb(acpi_base + reg);
+ return inb(smbus_base + reg);
}
static inline void sis630_write(u8 reg, u8 data)
{
- outb(data, acpi_base + reg);
+ outb(data, smbus_base + reg);
}
-static int sis630_transaction_start(struct i2c_adapter *adap, int size, u8 *oldclock)
+static int sis630_transaction_start(struct i2c_adapter *adap, int size,
+ u8 *oldclock)
{
- int temp;
+ int temp;
/* Make sure the SMBus host is ready to start transmitting. */
- if ((temp = sis630_read(SMB_CNT) & 0x03) != 0x00) {
- dev_dbg(&adap->dev, "SMBus busy (%02x).Resetting...\n",temp);
+ temp = sis630_read(SMB_CNT);
+ if ((temp & (SMB_PROBE | SMB_HOSTBUSY)) != 0x00) {
+ dev_dbg(&adap->dev, "SMBus busy (%02x). Resetting...\n", temp);
/* kill smbus transaction */
- sis630_write(SMBHOST_CNT, 0x20);
+ sis630_write(SMBHOST_CNT, SMB_KILL);
- if ((temp = sis630_read(SMB_CNT) & 0x03) != 0x00) {
+ temp = sis630_read(SMB_CNT);
+ if (temp & (SMB_PROBE | SMB_HOSTBUSY)) {
dev_dbg(&adap->dev, "Failed! (%02x)\n", temp);
return -EBUSY;
- } else {
+ } else {
dev_dbg(&adap->dev, "Successful!\n");
}
- }
+ }
/* save old clock, so we can prevent machine for hung */
*oldclock = sis630_read(SMB_CNT);
dev_dbg(&adap->dev, "saved clock 0x%02x\n", *oldclock);
- /* disable timeout interrupt , set Host Master Clock to 56KHz if requested */
+ /* disable timeout interrupt,
+ * set Host Master Clock to 56KHz if requested */
if (high_clock)
- sis630_write(SMB_CNT, 0x20);
+ sis630_write(SMB_CNT, SMBCLK_SEL);
else
- sis630_write(SMB_CNT, (*oldclock & ~0x40));
+ sis630_write(SMB_CNT, (*oldclock & ~MSTO_EN));
/* clear all sticky bits */
temp = sis630_read(SMB_STS);
sis630_write(SMB_STS, temp & 0x1e);
/* start the transaction by setting bit 4 and size */
- sis630_write(SMBHOST_CNT,0x10 | (size & 0x07));
+ sis630_write(SMBHOST_CNT, SMB_START | (size & 0x07));
return 0;
}
@@ -168,7 +183,7 @@ static int sis630_transaction_wait(struct i2c_adapter *adap, int size)
msleep(1);
temp = sis630_read(SMB_STS);
/* check if block transmitted */
- if (size == SIS630_BLOCK_DATA && (temp & 0x10))
+ if (size == SIS630_BLOCK_DATA && (temp & BYTE_DONE_STS))
break;
} while (!(temp & 0x0e) && (timeout++ < MAX_TIMEOUT));
@@ -178,19 +193,14 @@ static int sis630_transaction_wait(struct i2c_adapter *adap, int size)
result = -ETIMEDOUT;
}
- if (temp & 0x02) {
+ if (temp & SMBERR_STS) {
dev_dbg(&adap->dev, "Error: Failed bus transaction\n");
result = -ENXIO;
}
- if (temp & 0x04) {
+ if (temp & SMBCOL_STS) {
dev_err(&adap->dev, "Bus collision!\n");
- result = -EIO;
- /*
- TBD: Datasheet say:
- the software should clear this bit and restart SMBUS operation.
- Should we do it or user start request again?
- */
+ result = -EAGAIN;
}
return result;
@@ -198,21 +208,21 @@ static int sis630_transaction_wait(struct i2c_adapter *adap, int size)
static void sis630_transaction_end(struct i2c_adapter *adap, u8 oldclock)
{
- int temp = 0;
-
/* clear all status "sticky" bits */
- sis630_write(SMB_STS, temp);
+ sis630_write(SMB_STS, 0xFF);
- dev_dbg(&adap->dev, "SMB_CNT before clock restore 0x%02x\n", sis630_read(SMB_CNT));
+ dev_dbg(&adap->dev,
+ "SMB_CNT before clock restore 0x%02x\n", sis630_read(SMB_CNT));
/*
* restore old Host Master Clock if high_clock is set
* and oldclock was not 56KHz
*/
- if (high_clock && !(oldclock & 0x20))
- sis630_write(SMB_CNT,(sis630_read(SMB_CNT) & ~0x20));
+ if (high_clock && !(oldclock & SMBCLK_SEL))
+ sis630_write(SMB_CNT, sis630_read(SMB_CNT) & ~SMBCLK_SEL);
- dev_dbg(&adap->dev, "SMB_CNT after clock restore 0x%02x\n", sis630_read(SMB_CNT));
+ dev_dbg(&adap->dev,
+ "SMB_CNT after clock restore 0x%02x\n", sis630_read(SMB_CNT));
}
static int sis630_transaction(struct i2c_adapter *adap, int size)
@@ -229,7 +239,8 @@ static int sis630_transaction(struct i2c_adapter *adap, int size)
return result;
}
-static int sis630_block_data(struct i2c_adapter *adap, union i2c_smbus_data *data, int read_write)
+static int sis630_block_data(struct i2c_adapter *adap,
+ union i2c_smbus_data *data, int read_write)
{
int i, len = 0, rc = 0;
u8 oldclock = 0;
@@ -241,39 +252,43 @@ static int sis630_block_data(struct i2c_adapter *adap, union i2c_smbus_data *dat
else if (len > 32)
len = 32;
sis630_write(SMB_COUNT, len);
- for (i=1; i <= len; i++) {
- dev_dbg(&adap->dev, "set data 0x%02x\n", data->block[i]);
+ for (i = 1; i <= len; i++) {
+ dev_dbg(&adap->dev,
+ "set data 0x%02x\n", data->block[i]);
/* set data */
- sis630_write(SMB_BYTE+(i-1)%8, data->block[i]);
- if (i==8 || (len<8 && i==len)) {
- dev_dbg(&adap->dev, "start trans len=%d i=%d\n",len ,i);
+ sis630_write(SMB_BYTE + (i - 1) % 8, data->block[i]);
+ if (i == 8 || (len < 8 && i == len)) {
+ dev_dbg(&adap->dev,
+ "start trans len=%d i=%d\n", len, i);
/* first transaction */
rc = sis630_transaction_start(adap,
SIS630_BLOCK_DATA, &oldclock);
if (rc)
return rc;
- }
- else if ((i-1)%8 == 7 || i==len) {
- dev_dbg(&adap->dev, "trans_wait len=%d i=%d\n",len,i);
- if (i>8) {
- dev_dbg(&adap->dev, "clear smbary_sts len=%d i=%d\n",len,i);
+ } else if ((i - 1) % 8 == 7 || i == len) {
+ dev_dbg(&adap->dev,
+ "trans_wait len=%d i=%d\n", len, i);
+ if (i > 8) {
+ dev_dbg(&adap->dev,
+ "clear smbary_sts"
+ " len=%d i=%d\n", len, i);
/*
If this is not first transaction,
we must clear sticky bit.
clear SMBARY_STS
*/
- sis630_write(SMB_STS,0x10);
+ sis630_write(SMB_STS, BYTE_DONE_STS);
}
rc = sis630_transaction_wait(adap,
SIS630_BLOCK_DATA);
if (rc) {
- dev_dbg(&adap->dev, "trans_wait failed\n");
+ dev_dbg(&adap->dev,
+ "trans_wait failed\n");
break;
}
}
}
- }
- else {
+ } else {
/* read request */
data->block[0] = len = 0;
rc = sis630_transaction_start(adap,
@@ -294,18 +309,22 @@ static int sis630_block_data(struct i2c_adapter *adap, union i2c_smbus_data *dat
if (data->block[0] > 32)
data->block[0] = 32;
- dev_dbg(&adap->dev, "block data read len=0x%x\n", data->block[0]);
+ dev_dbg(&adap->dev,
+ "block data read len=0x%x\n", data->block[0]);
- for (i=0; i < 8 && len < data->block[0]; i++,len++) {
- dev_dbg(&adap->dev, "read i=%d len=%d\n", i, len);
- data->block[len+1] = sis630_read(SMB_BYTE+i);
+ for (i = 0; i < 8 && len < data->block[0]; i++, len++) {
+ dev_dbg(&adap->dev,
+ "read i=%d len=%d\n", i, len);
+ data->block[len + 1] = sis630_read(SMB_BYTE +
+ i);
}
- dev_dbg(&adap->dev, "clear smbary_sts len=%d i=%d\n",len,i);
+ dev_dbg(&adap->dev,
+ "clear smbary_sts len=%d i=%d\n", len, i);
/* clear SMBARY_STS */
- sis630_write(SMB_STS,0x10);
- } while(len < data->block[0]);
+ sis630_write(SMB_STS, BYTE_DONE_STS);
+ } while (len < data->block[0]);
}
sis630_transaction_end(adap, oldclock);
@@ -321,42 +340,47 @@ static s32 sis630_access(struct i2c_adapter *adap, u16 addr,
int status;
switch (size) {
- case I2C_SMBUS_QUICK:
- sis630_write(SMB_ADDR, ((addr & 0x7f) << 1) | (read_write & 0x01));
- size = SIS630_QUICK;
- break;
- case I2C_SMBUS_BYTE:
- sis630_write(SMB_ADDR, ((addr & 0x7f) << 1) | (read_write & 0x01));
- if (read_write == I2C_SMBUS_WRITE)
- sis630_write(SMB_CMD, command);
- size = SIS630_BYTE;
- break;
- case I2C_SMBUS_BYTE_DATA:
- sis630_write(SMB_ADDR, ((addr & 0x7f) << 1) | (read_write & 0x01));
- sis630_write(SMB_CMD, command);
- if (read_write == I2C_SMBUS_WRITE)
- sis630_write(SMB_BYTE, data->byte);
- size = SIS630_BYTE_DATA;
- break;
- case I2C_SMBUS_PROC_CALL:
- case I2C_SMBUS_WORD_DATA:
- sis630_write(SMB_ADDR,((addr & 0x7f) << 1) | (read_write & 0x01));
+ case I2C_SMBUS_QUICK:
+ sis630_write(SMB_ADDR,
+ ((addr & 0x7f) << 1) | (read_write & 0x01));
+ size = SIS630_QUICK;
+ break;
+ case I2C_SMBUS_BYTE:
+ sis630_write(SMB_ADDR,
+ ((addr & 0x7f) << 1) | (read_write & 0x01));
+ if (read_write == I2C_SMBUS_WRITE)
sis630_write(SMB_CMD, command);
- if (read_write == I2C_SMBUS_WRITE) {
- sis630_write(SMB_BYTE, data->word & 0xff);
- sis630_write(SMB_BYTE + 1,(data->word & 0xff00) >> 8);
- }
- size = (size == I2C_SMBUS_PROC_CALL ? SIS630_PCALL : SIS630_WORD_DATA);
- break;
- case I2C_SMBUS_BLOCK_DATA:
- sis630_write(SMB_ADDR,((addr & 0x7f) << 1) | (read_write & 0x01));
- sis630_write(SMB_CMD, command);
- size = SIS630_BLOCK_DATA;
- return sis630_block_data(adap, data, read_write);
- default:
- dev_warn(&adap->dev, "Unsupported transaction %d\n",
- size);
- return -EOPNOTSUPP;
+ size = SIS630_BYTE;
+ break;
+ case I2C_SMBUS_BYTE_DATA:
+ sis630_write(SMB_ADDR,
+ ((addr & 0x7f) << 1) | (read_write & 0x01));
+ sis630_write(SMB_CMD, command);
+ if (read_write == I2C_SMBUS_WRITE)
+ sis630_write(SMB_BYTE, data->byte);
+ size = SIS630_BYTE_DATA;
+ break;
+ case I2C_SMBUS_PROC_CALL:
+ case I2C_SMBUS_WORD_DATA:
+ sis630_write(SMB_ADDR,
+ ((addr & 0x7f) << 1) | (read_write & 0x01));
+ sis630_write(SMB_CMD, command);
+ if (read_write == I2C_SMBUS_WRITE) {
+ sis630_write(SMB_BYTE, data->word & 0xff);
+ sis630_write(SMB_BYTE + 1, (data->word & 0xff00) >> 8);
+ }
+ size = (size == I2C_SMBUS_PROC_CALL ?
+ SIS630_PCALL : SIS630_WORD_DATA);
+ break;
+ case I2C_SMBUS_BLOCK_DATA:
+ sis630_write(SMB_ADDR,
+ ((addr & 0x7f) << 1) | (read_write & 0x01));
+ sis630_write(SMB_CMD, command);
+ size = SIS630_BLOCK_DATA;
+ return sis630_block_data(adap, data, read_write);
+ default:
+ dev_warn(&adap->dev, "Unsupported transaction %d\n", size);
+ return -EOPNOTSUPP;
}
status = sis630_transaction(adap, size);
@@ -368,15 +392,16 @@ static s32 sis630_access(struct i2c_adapter *adap, u16 addr,
return 0;
}
- switch(size) {
- case SIS630_BYTE:
- case SIS630_BYTE_DATA:
- data->byte = sis630_read(SMB_BYTE);
- break;
- case SIS630_PCALL:
- case SIS630_WORD_DATA:
- data->word = sis630_read(SMB_BYTE) + (sis630_read(SMB_BYTE + 1) << 8);
- break;
+ switch (size) {
+ case SIS630_BYTE:
+ case SIS630_BYTE_DATA:
+ data->byte = sis630_read(SMB_BYTE);
+ break;
+ case SIS630_PCALL:
+ case SIS630_WORD_DATA:
+ data->word = sis630_read(SMB_BYTE) +
+ (sis630_read(SMB_BYTE + 1) << 8);
+ break;
}
return 0;
@@ -384,9 +409,9 @@ static s32 sis630_access(struct i2c_adapter *adap, u16 addr,
static u32 sis630_func(struct i2c_adapter *adapter)
{
- return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_BYTE_DATA |
- I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_PROC_CALL |
- I2C_FUNC_SMBUS_BLOCK_DATA;
+ return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+ I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
+ I2C_FUNC_SMBUS_PROC_CALL | I2C_FUNC_SMBUS_BLOCK_DATA;
}
static int sis630_setup(struct pci_dev *sis630_dev)
@@ -394,21 +419,23 @@ static int sis630_setup(struct pci_dev *sis630_dev)
unsigned char b;
struct pci_dev *dummy = NULL;
int retval, i;
+ /* acpi base address */
+ unsigned short acpi_base;
/* check for supported SiS devices */
- for (i=0; supported[i] > 0 ; i++) {
- if ((dummy = pci_get_device(PCI_VENDOR_ID_SI, supported[i], dummy)))
+ for (i = 0; supported[i] > 0; i++) {
+ dummy = pci_get_device(PCI_VENDOR_ID_SI, supported[i], dummy);
+ if (dummy)
break; /* found */
}
if (dummy) {
pci_dev_put(dummy);
- }
- else if (force) {
- dev_err(&sis630_dev->dev, "WARNING: Can't detect SIS630 compatible device, but "
+ } else if (force) {
+ dev_err(&sis630_dev->dev,
+ "WARNING: Can't detect SIS630 compatible device, but "
"loading because of force option enabled\n");
- }
- else {
+ } else {
return -ENODEV;
}
@@ -416,7 +443,7 @@ static int sis630_setup(struct pci_dev *sis630_dev)
Enable ACPI first , so we can accsess reg 74-75
in acpi io space and read acpi base addr
*/
- if (pci_read_config_byte(sis630_dev, SIS630_BIOS_CTL_REG,&b)) {
+ if (pci_read_config_byte(sis630_dev, SIS630_BIOS_CTL_REG, &b)) {
dev_err(&sis630_dev->dev, "Error: Can't read bios ctl reg\n");
retval = -ENODEV;
goto exit;
@@ -430,24 +457,35 @@ static int sis630_setup(struct pci_dev *sis630_dev)
}
/* Determine the ACPI base address */
- if (pci_read_config_word(sis630_dev,SIS630_ACPI_BASE_REG,&acpi_base)) {
- dev_err(&sis630_dev->dev, "Error: Can't determine ACPI base address\n");
+ if (pci_read_config_word(sis630_dev,
+ SIS630_ACPI_BASE_REG, &acpi_base)) {
+ dev_err(&sis630_dev->dev,
+ "Error: Can't determine ACPI base address\n");
retval = -ENODEV;
goto exit;
}
- dev_dbg(&sis630_dev->dev, "ACPI base at 0x%04x\n", acpi_base);
+ dev_dbg(&sis630_dev->dev, "ACPI base at 0x%04hx\n", acpi_base);
+
+ if (supported[i] == PCI_DEVICE_ID_SI_760)
+ smbus_base = acpi_base + 0xE0;
+ else
+ smbus_base = acpi_base + 0x80;
+
+ dev_dbg(&sis630_dev->dev, "SMBus base at 0x%04hx\n", smbus_base);
- retval = acpi_check_region(acpi_base + SMB_STS, SIS630_SMB_IOREGION,
+ retval = acpi_check_region(smbus_base + SMB_STS, SIS630_SMB_IOREGION,
sis630_driver.name);
if (retval)
goto exit;
/* Everything is happy, let's grab the memory and set things up. */
- if (!request_region(acpi_base + SMB_STS, SIS630_SMB_IOREGION,
+ if (!request_region(smbus_base + SMB_STS, SIS630_SMB_IOREGION,
sis630_driver.name)) {
- dev_err(&sis630_dev->dev, "SMBus registers 0x%04x-0x%04x already "
- "in use!\n", acpi_base + SMB_STS, acpi_base + SMB_SAA);
+ dev_err(&sis630_dev->dev,
+ "I/O Region 0x%04hx-0x%04hx for SMBus already in use.\n",
+ smbus_base + SMB_STS,
+ smbus_base + SMB_STS + SIS630_SMB_IOREGION - 1);
retval = -EBUSY;
goto exit;
}
@@ -456,7 +494,7 @@ static int sis630_setup(struct pci_dev *sis630_dev)
exit:
if (retval)
- acpi_base = 0;
+ smbus_base = 0;
return retval;
}
@@ -470,20 +508,24 @@ static struct i2c_adapter sis630_adapter = {
.owner = THIS_MODULE,
.class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
.algo = &smbus_algorithm,
+ .retries = 3
};
static DEFINE_PCI_DEVICE_TABLE(sis630_ids) = {
{ PCI_DEVICE(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503) },
{ PCI_DEVICE(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_LPC) },
+ { PCI_DEVICE(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_964) },
{ 0, }
};
-MODULE_DEVICE_TABLE (pci, sis630_ids);
+MODULE_DEVICE_TABLE(pci, sis630_ids);
static int sis630_probe(struct pci_dev *dev, const struct pci_device_id *id)
{
if (sis630_setup(dev)) {
- dev_err(&dev->dev, "SIS630 comp. bus not detected, module not inserted.\n");
+ dev_err(&dev->dev,
+ "SIS630 compatible bus not detected, "
+ "module not inserted.\n");
return -ENODEV;
}
@@ -491,17 +533,17 @@ static int sis630_probe(struct pci_dev *dev, const struct pci_device_id *id)
sis630_adapter.dev.parent = &dev->dev;
snprintf(sis630_adapter.name, sizeof(sis630_adapter.name),
- "SMBus SIS630 adapter at %04x", acpi_base + SMB_STS);
+ "SMBus SIS630 adapter at %04hx", smbus_base + SMB_STS);
return i2c_add_adapter(&sis630_adapter);
}
static void sis630_remove(struct pci_dev *dev)
{
- if (acpi_base) {
+ if (smbus_base) {
i2c_del_adapter(&sis630_adapter);
- release_region(acpi_base + SMB_STS, SIS630_SMB_IOREGION);
- acpi_base = 0;
+ release_region(smbus_base + SMB_STS, SIS630_SMB_IOREGION);
+ smbus_base = 0;
}
}
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-06 07:38:53 +0000