summaryrefslogtreecommitdiffstats
path: root/drivers/i2c/busses/i2c-stu300.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/i2c/busses/i2c-stu300.c')
-rw-r--r--drivers/i2c/busses/i2c-stu300.c102
1 files changed, 29 insertions, 73 deletions
diff --git a/drivers/i2c/busses/i2c-stu300.c b/drivers/i2c/busses/i2c-stu300.c
index 4d44af181f3..580a0c04cb4 100644
--- a/drivers/i2c/busses/i2c-stu300.c
+++ b/drivers/i2c/busses/i2c-stu300.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2007-2009 ST-Ericsson AB
+ * Copyright (C) 2007-2012 ST-Ericsson AB
* License terms: GNU General Public License (GPL) version 2
* ST DDC I2C master mode driver, used in e.g. U300 series platforms.
* Author: Linus Walleij <linus.walleij@stericsson.com>
@@ -139,8 +139,6 @@ module_param(scl_frequency, uint, 0644);
* struct stu300_dev - the stu300 driver state holder
* @pdev: parent platform device
* @adapter: corresponding I2C adapter
- * @phybase: location of I/O area in memory
- * @physize: size of I/O area in memory
* @clk: hardware block clock
* @irq: assigned interrupt line
* @cmd_issue_lock: this locks the following cmd_ variables
@@ -155,8 +153,6 @@ module_param(scl_frequency, uint, 0644);
struct stu300_dev {
struct platform_device *pdev;
struct i2c_adapter adapter;
- resource_size_t phybase;
- resource_size_t physize;
void __iomem *virtbase;
struct clk *clk;
int irq;
@@ -873,64 +869,44 @@ stu300_probe(struct platform_device *pdev)
int ret = 0;
char clk_name[] = "I2C0";
- dev = kzalloc(sizeof(struct stu300_dev), GFP_KERNEL);
+ dev = devm_kzalloc(&pdev->dev, sizeof(struct stu300_dev), GFP_KERNEL);
if (!dev) {
dev_err(&pdev->dev, "could not allocate device struct\n");
- ret = -ENOMEM;
- goto err_no_devmem;
+ return -ENOMEM;
}
bus_nr = pdev->id;
clk_name[3] += (char)bus_nr;
- dev->clk = clk_get(&pdev->dev, clk_name);
+ dev->clk = devm_clk_get(&pdev->dev, clk_name);
if (IS_ERR(dev->clk)) {
- ret = PTR_ERR(dev->clk);
dev_err(&pdev->dev, "could not retrieve i2c bus clock\n");
- goto err_no_clk;
+ return PTR_ERR(dev->clk);
}
dev->pdev = pdev;
- platform_set_drvdata(pdev, dev);
-
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- ret = -ENOENT;
- goto err_no_resource;
- }
-
- dev->phybase = res->start;
- dev->physize = resource_size(res);
-
- if (request_mem_region(dev->phybase, dev->physize,
- NAME " I/O Area") == NULL) {
- ret = -EBUSY;
- goto err_no_ioregion;
- }
+ if (!res)
+ return -ENOENT;
- dev->virtbase = ioremap(dev->phybase, dev->physize);
+ dev->virtbase = devm_request_and_ioremap(&pdev->dev, res);
dev_dbg(&pdev->dev, "initialize bus device I2C%d on virtual "
"base %p\n", bus_nr, dev->virtbase);
- if (!dev->virtbase) {
- ret = -ENOMEM;
- goto err_no_ioremap;
- }
+ if (!dev->virtbase)
+ return -ENOMEM;
dev->irq = platform_get_irq(pdev, 0);
- if (request_irq(dev->irq, stu300_irh, 0,
- NAME, dev)) {
- ret = -EIO;
- goto err_no_irq;
- }
+ ret = devm_request_irq(&pdev->dev, dev->irq, stu300_irh, 0, NAME, dev);
+ if (ret < 0)
+ return ret;
dev->speed = scl_frequency;
- clk_enable(dev->clk);
+ clk_prepare_enable(dev->clk);
ret = stu300_init_hw(dev);
clk_disable(dev->clk);
-
if (ret != 0) {
dev_err(&dev->pdev->dev, "error initializing hardware.\n");
- goto err_init_hw;
+ return -EIO;
}
/* IRQ event handling initialization */
@@ -952,57 +928,43 @@ stu300_probe(struct platform_device *pdev)
/* i2c device drivers may be active on return from add_adapter() */
ret = i2c_add_numbered_adapter(adap);
if (ret) {
- dev_err(&dev->pdev->dev, "failure adding ST Micro DDC "
+ dev_err(&pdev->dev, "failure adding ST Micro DDC "
"I2C adapter\n");
- goto err_add_adapter;
+ return ret;
}
- return 0;
- err_add_adapter:
- err_init_hw:
- free_irq(dev->irq, dev);
- err_no_irq:
- iounmap(dev->virtbase);
- err_no_ioremap:
- release_mem_region(dev->phybase, dev->physize);
- err_no_ioregion:
- platform_set_drvdata(pdev, NULL);
- err_no_resource:
- clk_put(dev->clk);
- err_no_clk:
- kfree(dev);
- err_no_devmem:
- dev_err(&pdev->dev, "failed to add " NAME " adapter: %d\n",
- pdev->id);
- return ret;
+ platform_set_drvdata(pdev, dev);
+ return 0;
}
#ifdef CONFIG_PM
-static int stu300_suspend(struct platform_device *pdev, pm_message_t state)
+static int stu300_suspend(struct device *device)
{
- struct stu300_dev *dev = platform_get_drvdata(pdev);
+ struct stu300_dev *dev = dev_get_drvdata(device);
/* Turn off everything */
stu300_wr8(0x00, dev->virtbase + I2C_CR);
return 0;
}
-static int stu300_resume(struct platform_device *pdev)
+static int stu300_resume(struct device *device)
{
int ret = 0;
- struct stu300_dev *dev = platform_get_drvdata(pdev);
+ struct stu300_dev *dev = dev_get_drvdata(device);
clk_enable(dev->clk);
ret = stu300_init_hw(dev);
clk_disable(dev->clk);
if (ret != 0)
- dev_err(&pdev->dev, "error re-initializing hardware.\n");
+ dev_err(device, "error re-initializing hardware.\n");
return ret;
}
+
+static SIMPLE_DEV_PM_OPS(stu300_pm, stu300_suspend, stu300_resume);
+#define STU300_I2C_PM (&stu300_pm)
#else
-#define stu300_suspend NULL
-#define stu300_resume NULL
+#define STU300_I2C_PM NULL
#endif
static int __exit
@@ -1013,12 +975,7 @@ stu300_remove(struct platform_device *pdev)
i2c_del_adapter(&dev->adapter);
/* Turn off everything */
stu300_wr8(0x00, dev->virtbase + I2C_CR);
- free_irq(dev->irq, dev);
- iounmap(dev->virtbase);
- release_mem_region(dev->phybase, dev->physize);
- clk_put(dev->clk);
platform_set_drvdata(pdev, NULL);
- kfree(dev);
return 0;
}
@@ -1026,10 +983,9 @@ static struct platform_driver stu300_i2c_driver = {
.driver = {
.name = NAME,
.owner = THIS_MODULE,
+ .pm = STU300_I2C_PM,
},
.remove = __exit_p(stu300_remove),
- .suspend = stu300_suspend,
- .resume = stu300_resume,
};