diff options
Diffstat (limited to 'drivers/i2c/busses/i2c-voodoo3.c')
| -rw-r--r-- | drivers/i2c/busses/i2c-voodoo3.c | 254 |
1 files changed, 254 insertions, 0 deletions
diff --git a/drivers/i2c/busses/i2c-voodoo3.c b/drivers/i2c/busses/i2c-voodoo3.c new file mode 100644 index 00000000000..3edf0e34155 --- /dev/null +++ b/drivers/i2c/busses/i2c-voodoo3.c @@ -0,0 +1,254 @@ +/* + voodoo3.c - Part of lm_sensors, Linux kernel modules for hardware + monitoring + Copyright (c) 1998, 1999 Frodo Looijaard <frodol@dds.nl>, + Philip Edelbrock <phil@netroedge.com>, + Ralph Metzler <rjkm@thp.uni-koeln.de>, and + Mark D. Studebaker <mdsxyz123@yahoo.com> + + Based on code written by Ralph Metzler <rjkm@thp.uni-koeln.de> and + Simon Vogl + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +/* This interfaces to the I2C bus of the Voodoo3 to gain access to + the BT869 and possibly other I2C devices. */ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/i2c.h> +#include <linux/i2c-algo-bit.h> +#include <asm/io.h> + +/* the only registers we use */ +#define REG 0x78 +#define REG2 0x70 + +/* bit locations in the register */ +#define DDC_ENAB 0x00040000 +#define DDC_SCL_OUT 0x00080000 +#define DDC_SDA_OUT 0x00100000 +#define DDC_SCL_IN 0x00200000 +#define DDC_SDA_IN 0x00400000 +#define I2C_ENAB 0x00800000 +#define I2C_SCL_OUT 0x01000000 +#define I2C_SDA_OUT 0x02000000 +#define I2C_SCL_IN 0x04000000 +#define I2C_SDA_IN 0x08000000 + +/* initialization states */ +#define INIT2 0x2 +#define INIT3 0x4 + +/* delays */ +#define CYCLE_DELAY 10 +#define TIMEOUT (HZ / 2) + + +static void __iomem *ioaddr; + +/* The voo GPIO registers don't have individual masks for each bit + so we always have to read before writing. */ + +static void bit_vooi2c_setscl(void *data, int val) +{ + unsigned int r; + r = readl(ioaddr + REG); + if (val) + r |= I2C_SCL_OUT; + else + r &= ~I2C_SCL_OUT; + writel(r, ioaddr + REG); + readl(ioaddr + REG); /* flush posted write */ +} + +static void bit_vooi2c_setsda(void *data, int val) +{ + unsigned int r; + r = readl(ioaddr + REG); + if (val) + r |= I2C_SDA_OUT; + else + r &= ~I2C_SDA_OUT; + writel(r, ioaddr + REG); + readl(ioaddr + REG); /* flush posted write */ +} + +/* The GPIO pins are open drain, so the pins always remain outputs. + We rely on the i2c-algo-bit routines to set the pins high before + reading the input from other chips. */ + +static int bit_vooi2c_getscl(void *data) +{ + return (0 != (readl(ioaddr + REG) & I2C_SCL_IN)); +} + +static int bit_vooi2c_getsda(void *data) +{ + return (0 != (readl(ioaddr + REG) & I2C_SDA_IN)); +} + +static void bit_vooddc_setscl(void *data, int val) +{ + unsigned int r; + r = readl(ioaddr + REG); + if (val) + r |= DDC_SCL_OUT; + else + r &= ~DDC_SCL_OUT; + writel(r, ioaddr + REG); + readl(ioaddr + REG); /* flush posted write */ +} + +static void bit_vooddc_setsda(void *data, int val) +{ + unsigned int r; + r = readl(ioaddr + REG); + if (val) + r |= DDC_SDA_OUT; + else + r &= ~DDC_SDA_OUT; + writel(r, ioaddr + REG); + readl(ioaddr + REG); /* flush posted write */ +} + +static int bit_vooddc_getscl(void *data) +{ + return (0 != (readl(ioaddr + REG) & DDC_SCL_IN)); +} + +static int bit_vooddc_getsda(void *data) +{ + return (0 != (readl(ioaddr + REG) & DDC_SDA_IN)); +} + +static int config_v3(struct pci_dev *dev) +{ + unsigned long cadr; + + /* map Voodoo3 memory */ + cadr = dev->resource[0].start; + cadr &= PCI_BASE_ADDRESS_MEM_MASK; + ioaddr = ioremap_nocache(cadr, 0x1000); + if (ioaddr) { + writel(0x8160, ioaddr + REG2); + writel(0xcffc0020, ioaddr + REG); + dev_info(&dev->dev, "Using Banshee/Voodoo3 I2C device at %p\n", ioaddr); + return 0; + } + return -ENODEV; +} + +static struct i2c_algo_bit_data voo_i2c_bit_data = { + .setsda = bit_vooi2c_setsda, + .setscl = bit_vooi2c_setscl, + .getsda = bit_vooi2c_getsda, + .getscl = bit_vooi2c_getscl, + .udelay = CYCLE_DELAY, + .mdelay = CYCLE_DELAY, + .timeout = TIMEOUT +}; + +static struct i2c_adapter voodoo3_i2c_adapter = { + .owner = THIS_MODULE, + .class = I2C_CLASS_TV_ANALOG, + .name = "I2C Voodoo3/Banshee adapter", + .algo_data = &voo_i2c_bit_data, +}; + +static struct i2c_algo_bit_data voo_ddc_bit_data = { + .setsda = bit_vooddc_setsda, + .setscl = bit_vooddc_setscl, + .getsda = bit_vooddc_getsda, + .getscl = bit_vooddc_getscl, + .udelay = CYCLE_DELAY, + .mdelay = CYCLE_DELAY, + .timeout = TIMEOUT +}; + +static struct i2c_adapter voodoo3_ddc_adapter = { + .owner = THIS_MODULE, + .class = I2C_CLASS_DDC, + .name = "DDC Voodoo3/Banshee adapter", + .algo_data = &voo_ddc_bit_data, +}; + +static struct pci_device_id voodoo3_ids[] __devinitdata = { + { PCI_DEVICE(PCI_VENDOR_ID_3DFX, PCI_DEVICE_ID_3DFX_VOODOO3) }, + { PCI_DEVICE(PCI_VENDOR_ID_3DFX, PCI_DEVICE_ID_3DFX_BANSHEE) }, + { 0, } +}; + +MODULE_DEVICE_TABLE (pci, voodoo3_ids); + +static int __devinit voodoo3_probe(struct pci_dev *dev, const struct pci_device_id *id) +{ + int retval; + + retval = config_v3(dev); + if (retval) + return retval; + + /* set up the sysfs linkage to our parent device */ + voodoo3_i2c_adapter.dev.parent = &dev->dev; + voodoo3_ddc_adapter.dev.parent = &dev->dev; + + retval = i2c_bit_add_bus(&voodoo3_i2c_adapter); + if (retval) + return retval; + retval = i2c_bit_add_bus(&voodoo3_ddc_adapter); + if (retval) + i2c_bit_del_bus(&voodoo3_i2c_adapter); + return retval; +} + +static void __devexit voodoo3_remove(struct pci_dev *dev) +{ + i2c_bit_del_bus(&voodoo3_i2c_adapter); + i2c_bit_del_bus(&voodoo3_ddc_adapter); + iounmap(ioaddr); +} + +static struct pci_driver voodoo3_driver = { + .name = "voodoo3_smbus", + .id_table = voodoo3_ids, + .probe = voodoo3_probe, + .remove = __devexit_p(voodoo3_remove), +}; + +static int __init i2c_voodoo3_init(void) +{ + return pci_register_driver(&voodoo3_driver); +} + +static void __exit i2c_voodoo3_exit(void) +{ + pci_unregister_driver(&voodoo3_driver); +} + + +MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, " + "Philip Edelbrock <phil@netroedge.com>, " + "Ralph Metzler <rjkm@thp.uni-koeln.de>, " + "and Mark D. Studebaker <mdsxyz123@yahoo.com>"); +MODULE_DESCRIPTION("Voodoo3 I2C/SMBus driver"); +MODULE_LICENSE("GPL"); + +module_init(i2c_voodoo3_init); +module_exit(i2c_voodoo3_exit); |