diff options
Diffstat (limited to 'drivers/i2c/busses')
| -rw-r--r-- | drivers/i2c/busses/i2c-bfin-twi.c | 6 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-omap.c | 13 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-pxa.c | 2 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-s3c2410.c | 2 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-sh_mobile.c | 2 |
5 files changed, 18 insertions, 7 deletions
diff --git a/drivers/i2c/busses/i2c-bfin-twi.c b/drivers/i2c/busses/i2c-bfin-twi.c index b309ac2c3d5..fe3fb567317 100644 --- a/drivers/i2c/busses/i2c-bfin-twi.c +++ b/drivers/i2c/busses/i2c-bfin-twi.c @@ -693,13 +693,13 @@ static int i2c_bfin_twi_probe(struct platform_device *pdev) } /* Set TWI internal clock as 10MHz */ - write_CONTROL(iface, ((get_sclk() / 1024 / 1024 + 5) / 10) & 0x7F); + write_CONTROL(iface, ((get_sclk() / 1000 / 1000 + 5) / 10) & 0x7F); /* * We will not end up with a CLKDIV=0 because no one will specify - * 20kHz SCL or less in Kconfig now. (5 * 1024 / 20 = 0x100) + * 20kHz SCL or less in Kconfig now. (5 * 1000 / 20 = 250) */ - clkhilow = 5 * 1024 / CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ; + clkhilow = ((10 * 1000 / CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ) + 1) / 2; /* Set Twi interface clock as specified */ write_CLKDIV(iface, (clkhilow << 8) | clkhilow); diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index 75bf3ad1809..0037e31076b 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -247,7 +247,13 @@ static void omap_i2c_unidle(struct omap_i2c_dev *dev) omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN); } dev->idle = 0; - omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, dev->iestate); + + /* + * Don't write to this register if the IE state is 0 as it can + * cause deadlock. + */ + if (dev->iestate) + omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, dev->iestate); } static void omap_i2c_idle(struct omap_i2c_dev *dev) @@ -280,6 +286,11 @@ static int omap_i2c_init(struct omap_i2c_dev *dev) unsigned long internal_clk = 0; if (dev->rev >= OMAP_I2C_REV_2) { + /* Disable I2C controller before soft reset */ + omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, + omap_i2c_read_reg(dev, OMAP_I2C_CON_REG) & + ~(OMAP_I2C_CON_EN)); + omap_i2c_write_reg(dev, OMAP_I2C_SYSC_REG, SYSC_SOFTRESET_MASK); /* For some reason we need to set the EN bit before the * reset done bit gets set. */ diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c index 049555777f6..7647a20523a 100644 --- a/drivers/i2c/busses/i2c-pxa.c +++ b/drivers/i2c/busses/i2c-pxa.c @@ -1155,7 +1155,7 @@ static int i2c_pxa_resume_noirq(struct device *dev) return 0; } -static struct dev_pm_ops i2c_pxa_dev_pm_ops = { +static const struct dev_pm_ops i2c_pxa_dev_pm_ops = { .suspend_noirq = i2c_pxa_suspend_noirq, .resume_noirq = i2c_pxa_resume_noirq, }; diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index 96aafb91b69..1d8c98613fa 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -967,7 +967,7 @@ static int s3c24xx_i2c_resume(struct device *dev) return 0; } -static struct dev_pm_ops s3c24xx_i2c_dev_pm_ops = { +static const struct dev_pm_ops s3c24xx_i2c_dev_pm_ops = { .suspend_noirq = s3c24xx_i2c_suspend_noirq, .resume = s3c24xx_i2c_resume, }; diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c index 86a9d4e8147..ccc46418ef7 100644 --- a/drivers/i2c/busses/i2c-sh_mobile.c +++ b/drivers/i2c/busses/i2c-sh_mobile.c @@ -647,7 +647,7 @@ static int sh_mobile_i2c_runtime_nop(struct device *dev) return 0; } -static struct dev_pm_ops sh_mobile_i2c_dev_pm_ops = { +static const struct dev_pm_ops sh_mobile_i2c_dev_pm_ops = { .runtime_suspend = sh_mobile_i2c_runtime_nop, .runtime_resume = sh_mobile_i2c_runtime_nop, }; |