diff options
Diffstat (limited to 'drivers/i2c/busses')
25 files changed, 576 insertions, 364 deletions
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 7244c8be606..2e7530a4e7b 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -133,7 +133,7 @@ config I2C_PIIX4 ATI IXP300 ATI IXP400 ATI SB600 - ATI SB700 + ATI SB700/SP5100 ATI SB800 AMD Hudson-2 Serverworks OSB4 @@ -143,6 +143,10 @@ config I2C_PIIX4 Serverworks HT-1100 SMSC Victory66 + Some AMD chipsets contain two PIIX4-compatible SMBus + controllers. This driver will attempt to use both controllers + on the SB700/SP5100, if they have been initialized by the BIOS. + This driver can also be built as a module. If so, the module will be called i2c-piix4. diff --git a/drivers/i2c/busses/i2c-ali1535.c b/drivers/i2c/busses/i2c-ali1535.c index e66d248fc12..125cd8e0ad2 100644 --- a/drivers/i2c/busses/i2c-ali1535.c +++ b/drivers/i2c/busses/i2c-ali1535.c @@ -531,15 +531,7 @@ static struct pci_driver ali1535_driver = { .remove = __devexit_p(ali1535_remove), }; -static int __init i2c_ali1535_init(void) -{ - return pci_register_driver(&ali1535_driver); -} - -static void __exit i2c_ali1535_exit(void) -{ - pci_unregister_driver(&ali1535_driver); -} +module_pci_driver(ali1535_driver); MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, " "Philip Edelbrock <phil@netroedge.com>, " @@ -547,6 +539,3 @@ MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, " "and Dan Eaton <dan.eaton@rocketlogix.com>"); MODULE_DESCRIPTION("ALI1535 SMBus driver"); MODULE_LICENSE("GPL"); - -module_init(i2c_ali1535_init); -module_exit(i2c_ali1535_exit); diff --git a/drivers/i2c/busses/i2c-ali1563.c b/drivers/i2c/busses/i2c-ali1563.c index 47ae0091e02..e02d9f86c6a 100644 --- a/drivers/i2c/busses/i2c-ali1563.c +++ b/drivers/i2c/busses/i2c-ali1563.c @@ -431,18 +431,6 @@ static struct pci_driver ali1563_pci_driver = { .remove = __devexit_p(ali1563_remove), }; -static int __init ali1563_init(void) -{ - return pci_register_driver(&ali1563_pci_driver); -} - -module_init(ali1563_init); - -static void __exit ali1563_exit(void) -{ - pci_unregister_driver(&ali1563_pci_driver); -} - -module_exit(ali1563_exit); +module_pci_driver(ali1563_pci_driver); MODULE_LICENSE("GPL"); diff --git a/drivers/i2c/busses/i2c-ali15x3.c b/drivers/i2c/busses/i2c-ali15x3.c index 087ea9caa74..ce8d26d053a 100644 --- a/drivers/i2c/busses/i2c-ali15x3.c +++ b/drivers/i2c/busses/i2c-ali15x3.c @@ -513,21 +513,10 @@ static struct pci_driver ali15x3_driver = { .remove = __devexit_p(ali15x3_remove), }; -static int __init i2c_ali15x3_init(void) -{ - return pci_register_driver(&ali15x3_driver); -} - -static void __exit i2c_ali15x3_exit(void) -{ - pci_unregister_driver(&ali15x3_driver); -} +module_pci_driver(ali15x3_driver); MODULE_AUTHOR ("Frodo Looijaard <frodol@dds.nl>, " "Philip Edelbrock <phil@netroedge.com>, " "and Mark D. Studebaker <mdsxyz123@yahoo.com>"); MODULE_DESCRIPTION("ALI15X3 SMBus driver"); MODULE_LICENSE("GPL"); - -module_init(i2c_ali15x3_init); -module_exit(i2c_ali15x3_exit); diff --git a/drivers/i2c/busses/i2c-amd756.c b/drivers/i2c/busses/i2c-amd756.c index eb778bf15c1..304aa03b57b 100644 --- a/drivers/i2c/busses/i2c-amd756.c +++ b/drivers/i2c/busses/i2c-amd756.c @@ -410,21 +410,10 @@ static struct pci_driver amd756_driver = { .remove = __devexit_p(amd756_remove), }; -static int __init amd756_init(void) -{ - return pci_register_driver(&amd756_driver); -} - -static void __exit amd756_exit(void) -{ - pci_unregister_driver(&amd756_driver); -} +module_pci_driver(amd756_driver); MODULE_AUTHOR("Merlin Hughes <merlin@merlin.org>"); MODULE_DESCRIPTION("AMD756/766/768/8111 and nVidia nForce SMBus driver"); MODULE_LICENSE("GPL"); EXPORT_SYMBOL(amd756_smbus); - -module_init(amd756_init) -module_exit(amd756_exit) diff --git a/drivers/i2c/busses/i2c-amd8111.c b/drivers/i2c/busses/i2c-amd8111.c index e5ac53b99b0..0919ac1d99a 100644 --- a/drivers/i2c/busses/i2c-amd8111.c +++ b/drivers/i2c/busses/i2c-amd8111.c @@ -491,15 +491,4 @@ static struct pci_driver amd8111_driver = { .remove = __devexit_p(amd8111_remove), }; -static int __init i2c_amd8111_init(void) -{ - return pci_register_driver(&amd8111_driver); -} - -static void __exit i2c_amd8111_exit(void) -{ - pci_unregister_driver(&amd8111_driver); -} - -module_init(i2c_amd8111_init); -module_exit(i2c_amd8111_exit); +module_pci_driver(amd8111_driver); diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c index 00e8f213f56..92a1e2c15ba 100644 --- a/drivers/i2c/busses/i2c-designware-pcidrv.c +++ b/drivers/i2c/busses/i2c-designware-pcidrv.c @@ -374,17 +374,7 @@ static struct pci_driver dw_i2c_driver = { }, }; -static int __init dw_i2c_init_driver(void) -{ - return pci_register_driver(&dw_i2c_driver); -} -module_init(dw_i2c_init_driver); - -static void __exit dw_i2c_exit_driver(void) -{ - pci_unregister_driver(&dw_i2c_driver); -} -module_exit(dw_i2c_exit_driver); +module_pci_driver(dw_i2c_driver); MODULE_AUTHOR("Baruch Siach <baruch@tkos.co.il>"); MODULE_DESCRIPTION("Synopsys DesignWare PCI I2C bus adapter"); diff --git a/drivers/i2c/busses/i2c-diolan-u2c.c b/drivers/i2c/busses/i2c-diolan-u2c.c index 7eb19a5222f..aedb94f34bf 100644 --- a/drivers/i2c/busses/i2c-diolan-u2c.c +++ b/drivers/i2c/busses/i2c-diolan-u2c.c @@ -517,6 +517,6 @@ static struct usb_driver diolan_u2c_driver = { module_usb_driver(diolan_u2c_driver); -MODULE_AUTHOR("Guenter Roeck <guenter.roeck@ericsson.com>"); +MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>"); MODULE_DESCRIPTION(DRIVER_NAME " driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/i2c/busses/i2c-eg20t.c b/drivers/i2c/busses/i2c-eg20t.c index 2f74ae872e1..259f7697bf2 100644 --- a/drivers/i2c/busses/i2c-eg20t.c +++ b/drivers/i2c/busses/i2c-eg20t.c @@ -953,17 +953,7 @@ static struct pci_driver pch_pcidriver = { .resume = pch_i2c_resume }; -static int __init pch_pci_init(void) -{ - return pci_register_driver(&pch_pcidriver); -} -module_init(pch_pci_init); - -static void __exit pch_pci_exit(void) -{ - pci_unregister_driver(&pch_pcidriver); -} -module_exit(pch_pci_exit); +module_pci_driver(pch_pcidriver); MODULE_DESCRIPTION("Intel EG20T PCH/LAPIS Semico ML7213/ML7223/ML7831 IOH I2C"); MODULE_LICENSE("GPL"); diff --git a/drivers/i2c/busses/i2c-hydra.c b/drivers/i2c/busses/i2c-hydra.c index c527de17db4..c9f95e1666a 100644 --- a/drivers/i2c/busses/i2c-hydra.c +++ b/drivers/i2c/busses/i2c-hydra.c @@ -156,23 +156,8 @@ static struct pci_driver hydra_driver = { .remove = __devexit_p(hydra_remove), }; -static int __init i2c_hydra_init(void) -{ - return pci_register_driver(&hydra_driver); -} - - -static void __exit i2c_hydra_exit(void) -{ - pci_unregister_driver(&hydra_driver); -} - - +module_pci_driver(hydra_driver); MODULE_AUTHOR("Geert Uytterhoeven <geert@linux-m68k.org>"); MODULE_DESCRIPTION("i2c for Apple Hydra Mac I/O"); MODULE_LICENSE("GPL"); - -module_init(i2c_hydra_init); -module_exit(i2c_hydra_exit); - diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index ae2945a5e00..898dcf9c7ad 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -60,10 +60,12 @@ Block process call transaction no I2C block read transaction yes (doesn't use the block buffer) Slave mode no + Interrupt processing yes See the file Documentation/i2c/busses/i2c-i801 for details. */ +#include <linux/interrupt.h> #include <linux/module.h> #include <linux/pci.h> #include <linux/kernel.h> @@ -76,6 +78,7 @@ #include <linux/io.h> #include <linux/dmi.h> #include <linux/slab.h> +#include <linux/wait.h> /* I801 SMBus address offsets */ #define SMBHSTSTS(p) (0 + (p)->smba) @@ -91,8 +94,12 @@ /* PCI Address Constants */ #define SMBBAR 4 +#define SMBPCISTS 0x006 #define SMBHSTCFG 0x040 +/* Host status bits for SMBPCISTS */ +#define SMBPCISTS_INTS 0x08 + /* Host configuration bits for SMBHSTCFG */ #define SMBHSTCFG_HST_EN 1 #define SMBHSTCFG_SMB_SMI_EN 2 @@ -102,12 +109,8 @@ #define SMBAUXCTL_CRC 1 #define SMBAUXCTL_E32B 2 -/* kill bit for SMBHSTCNT */ -#define SMBHSTCNT_KILL 2 - /* Other settings */ #define MAX_RETRIES 400 -#define ENABLE_INT9 0 /* set to 0x01 to enable - untested */ /* I801 command constants */ #define I801_QUICK 0x00 @@ -117,10 +120,13 @@ #define I801_PROC_CALL 0x10 /* unimplemented */ #define I801_BLOCK_DATA 0x14 #define I801_I2C_BLOCK_DATA 0x18 /* ICH5 and later */ -#define I801_BLOCK_LAST 0x34 -#define I801_I2C_BLOCK_LAST 0x38 /* ICH5 and later */ -#define I801_START 0x40 -#define I801_PEC_EN 0x80 /* ICH3 and later */ + +/* I801 Host Control register bits */ +#define SMBHSTCNT_INTREN 0x01 +#define SMBHSTCNT_KILL 0x02 +#define SMBHSTCNT_LAST_BYTE 0x20 +#define SMBHSTCNT_START 0x40 +#define SMBHSTCNT_PEC_EN 0x80 /* ICH3 and later */ /* I801 Hosts Status register bits */ #define SMBHSTSTS_BYTE_DONE 0x80 @@ -132,9 +138,11 @@ #define SMBHSTSTS_INTR 0x02 #define SMBHSTSTS_HOST_BUSY 0x01 -#define STATUS_FLAGS (SMBHSTSTS_BYTE_DONE | SMBHSTSTS_FAILED | \ - SMBHSTSTS_BUS_ERR | SMBHSTSTS_DEV_ERR | \ - SMBHSTSTS_INTR) +#define STATUS_ERROR_FLAGS (SMBHSTSTS_FAILED | SMBHSTSTS_BUS_ERR | \ + SMBHSTSTS_DEV_ERR) + +#define STATUS_FLAGS (SMBHSTSTS_BYTE_DONE | SMBHSTSTS_INTR | \ + STATUS_ERROR_FLAGS) /* Older devices have their ID defined in <linux/pci_ids.h> */ #define PCI_DEVICE_ID_INTEL_COUGARPOINT_SMBUS 0x1c22 @@ -154,6 +162,17 @@ struct i801_priv { unsigned char original_hstcfg; struct pci_dev *pci_dev; unsigned int features; + + /* isr processing */ + wait_queue_head_t waitq; + u8 status; + + /* Command state used by isr for byte-by-byte block transactions */ + u8 cmd; + bool is_read; + int count; + int len; + u8 *data; }; static struct pci_driver i801_driver; @@ -162,6 +181,7 @@ static struct pci_driver i801_driver; #define FEATURE_BLOCK_BUFFER (1 << 1) #define FEATURE_BLOCK_PROC (1 << 2) #define FEATURE_I2C_BLOCK_READ (1 << 3) +#define FEATURE_IRQ (1 << 4) /* Not really a feature, but it's convenient to handle it as such */ #define FEATURE_IDF (1 << 15) @@ -170,6 +190,7 @@ static const char *i801_feature_names[] = { "Block buffer", "Block process call", "I2C block read", + "Interrupt", }; static unsigned int disable_features; @@ -205,13 +226,22 @@ static int i801_check_pre(struct i801_priv *priv) return 0; } -/* Convert the status register to an error code, and clear it. */ -static int i801_check_post(struct i801_priv *priv, int status, int timeout) +/* + * Convert the status register to an error code, and clear it. + * Note that status only contains the bits we want to clear, not the + * actual register value. + */ +static int i801_check_post(struct i801_priv *priv, int status) { int result = 0; - /* If the SMBus is still busy, we give up */ - if (timeout) { + /* + * If the SMBus is still busy, we give up + * Note: This timeout condition only happens when using polling + * transactions. For interrupt operation, NAK/timeout is indicated by + * DEV_ERR. + */ + if (unlikely(status < 0)) { dev_err(&priv->pci_dev->dev, "Transaction timeout\n"); /* try to stop the current command */ dev_dbg(&priv->pci_dev->dev, "Terminating the current operation\n"); @@ -244,64 +274,76 @@ static int i801_check_post(struct i801_priv *priv, int status, int timeout) dev_dbg(&priv->pci_dev->dev, "Lost arbitration\n"); } - if (result) { - /* Clear error flags */ - outb_p(status & STATUS_FLAGS, SMBHSTSTS(priv)); - status = inb_p(SMBHSTSTS(priv)) & STATUS_FLAGS; - if (status) { - dev_warn(&priv->pci_dev->dev, "Failed clearing status " - "flags at end of transaction (%02x)\n", - status); - } - } + /* Clear status flags except BYTE_DONE, to be cleared by caller */ + outb_p(status, SMBHSTSTS(priv)); return result; } -static int i801_transaction(struct i801_priv *priv, int xact) +/* Wait for BUSY being cleared and either INTR or an error flag being set */ +static int i801_wait_intr(struct i801_priv *priv) { - int status; - int result; int timeout = 0; - - result = i801_check_pre(priv); - if (result < 0) - return result; - - /* the current contents of SMBHSTCNT can be overwritten, since PEC, - * INTREN, SMBSCMD are passed in xact */ - outb_p(xact | I801_START, SMBHSTCNT(priv)); + int status; /* We will always wait for a fraction of a second! */ do { usleep_range(250, 500); status = inb_p(SMBHSTSTS(priv)); - } while ((status & SMBHSTSTS_HOST_BUSY) && (timeout++ < MAX_RETRIES)); + } while (((status & SMBHSTSTS_HOST_BUSY) || + !(status & (STATUS_ERROR_FLAGS | SMBHSTSTS_INTR))) && + (timeout++ < MAX_RETRIES)); - result = i801_check_post(priv, status, timeout > MAX_RETRIES); - if (result < 0) - return result; - - outb_p(SMBHSTSTS_INTR, SMBHSTSTS(priv)); - return 0; + if (timeout > MAX_RETRIES) { + dev_dbg(&priv->pci_dev->dev, "INTR Timeout!\n"); + return -ETIMEDOUT; + } + return status & (STATUS_ERROR_FLAGS | SMBHSTSTS_INTR); } -/* wait for INTR bit as advised by Intel */ -static void i801_wait_hwpec(struct i801_priv *priv) +/* Wait for either BYTE_DONE or an error flag being set */ +static int i801_wait_byte_done(struct i801_priv *priv) { int timeout = 0; int status; + /* We will always wait for a fraction of a second! */ do { usleep_range(250, 500); status = inb_p(SMBHSTSTS(priv)); - } while ((!(status & SMBHSTSTS_INTR)) - && (timeout++ < MAX_RETRIES)); + } while (!(status & (STATUS_ERROR_FLAGS | SMBHSTSTS_BYTE_DONE)) && + (timeout++ < MAX_RETRIES)); - if (timeout > MAX_RETRIES) - dev_dbg(&priv->pci_dev->dev, "PEC Timeout!\n"); + if (timeout > MAX_RETRIES) { + dev_dbg(&priv->pci_dev->dev, "BYTE_DONE Timeout!\n"); + return -ETIMEDOUT; + } + return status & STATUS_ERROR_FLAGS; +} - outb_p(status, SMBHSTSTS(priv)); +static int i801_transaction(struct i801_priv *priv, int xact) +{ + int status; + int result; + + result = i801_check_pre(priv); + if (result < 0) + return result; + + if (priv->features & FEATURE_IRQ) { + outb_p(xact | SMBHSTCNT_INTREN | SMBHSTCNT_START, + SMBHSTCNT(priv)); + wait_event(priv->waitq, (status = priv->status)); + priv->status = 0; + return i801_check_post(priv, status); + } + + /* the current contents of SMBHSTCNT can be overwritten, since PEC, + * SMBSCMD are passed in xact */ + outb_p(xact | SMBHSTCNT_START, SMBHSTCNT(priv)); + + status = i801_wait_intr(priv); + return i801_check_post(priv, status); } static int i801_block_transaction_by_block(struct i801_priv *priv, @@ -321,8 +363,8 @@ static int i801_block_transaction_by_block(struct i801_priv *priv, outb_p(data->block[i+1], SMBBLKDAT(priv)); } - status = i801_transaction(priv, I801_BLOCK_DATA | ENABLE_INT9 | - I801_PEC_EN * hwpec); + status = i801_transaction(priv, I801_BLOCK_DATA | + (hwpec ? SMBHSTCNT_PEC_EN : 0)); if (status) return status; @@ -338,6 +380,98 @@ static int i801_block_transaction_by_block(struct i801_priv *priv, return 0; } +static void i801_isr_byte_done(struct i801_priv *priv) +{ + if (priv->is_read) { + /* For SMBus block reads, length is received with first byte */ + if (((priv->cmd & 0x1c) == I801_BLOCK_DATA) && + (priv->count == 0)) { + priv->len = inb_p(SMBHSTDAT0(priv)); + if (priv->len < 1 || priv->len > I2C_SMBUS_BLOCK_MAX) { + dev_err(&priv->pci_dev->dev, + "Illegal SMBus block read size %d\n", + priv->len); + /* FIXME: Recover */ + priv->len = I2C_SMBUS_BLOCK_MAX; + } else { + dev_dbg(&priv->pci_dev->dev, + "SMBus block read size is %d\n", + priv->len); + } + priv->data[-1] = priv->len; + } + + /* Read next byte */ + if (priv->count < priv->len) + priv->data[priv->count++] = inb(SMBBLKDAT(priv)); + else + dev_dbg(&priv->pci_dev->dev, + "Discarding extra byte on block read\n"); + + /* Set LAST_BYTE for last byte of read transaction */ + if (priv->count == priv->len - 1) + outb_p(priv->cmd | SMBHSTCNT_LAST_BYTE, + SMBHSTCNT(priv)); + } else if (priv->count < priv->len - 1) { + /* Write next byte, except for IRQ after last byte */ + outb_p(priv->data[++priv->count], SMBBLKDAT(priv)); + } + + /* Clear BYTE_DONE to continue with next byte */ + outb_p(SMBHSTSTS_BYTE_DONE, SMBHSTSTS(priv)); +} + +/* + * There are two kinds of interrupts: + * + * 1) i801 signals transaction completion with one of these interrupts: + * INTR - Success + * DEV_ERR - Invalid command, NAK or communication timeout + * BUS_ERR - SMI# transaction collision + * FAILED - transaction was canceled due to a KILL request + * When any of these occur, update ->status and wake up the waitq. + * ->status must be cleared before kicking off the next transaction. + * + * 2) For byte-by-byte (I2C read/write) transactions, one BYTE_DONE interrupt + * occurs for each byte of a byte-by-byte to prepare the next byte. + */ +static irqreturn_t i801_isr(int irq, void *dev_id) +{ + struct i801_priv *priv = dev_id; + u16 pcists; + u8 status; + + /* Confirm this is our interrupt */ + pci_read_config_word(priv->pci_dev, SMBPCISTS, &pcists); + if (!(pcists & SMBPCISTS_INTS)) + return IRQ_NONE; + + status = inb_p(SMBHSTSTS(priv)); + if (status != 0x42) + dev_dbg(&priv->pci_dev->dev, "irq: status = %02x\n", status); + + if (status & SMBHSTSTS_BYTE_DONE) + i801_isr_byte_done(priv); + + /* + * Clear irq sources and report transaction result. + * ->status must be cleared before the next transaction is started. + */ + status &= SMBHSTSTS_INTR | STATUS_ERROR_FLAGS; + if (status) { + outb_p(status, SMBHSTSTS(priv)); + priv->status |= status; + wake_up(&priv->waitq); + } + + return IRQ_HANDLED; +} + +/* + * For "byte-by-byte" block transactions: + * I2C write uses cmd=I801_BLOCK_DATA, I2C_EN=1 + * I2C read uses cmd=I801_I2C_BLOCK_DATA + */ static int i801_block_transaction_byte_by_byte(struct i801_priv *priv, union i2c_smbus_data *data, char read_write, int command, @@ -347,7 +481,6 @@ static int i801_block_transaction_byte_by_byte(struct i801_priv *priv, int smbcmd; int status; int result; - int timeout; result = i801_check_pre(priv); if (result < 0) @@ -360,36 +493,39 @@ static int i801_block_transaction_byte_by_byte(struct i801_priv *priv, outb_p(data->block[1], SMBBLKDAT(priv)); } + if (command == I2C_SMBUS_I2C_BLOCK_DATA && + read_write == I2C_SMBUS_READ) + smbcmd = I801_I2C_BLOCK_DATA; + else + smbcmd = I801_BLOCK_DATA; + + if (priv->features & FEATURE_IRQ) { + priv->is_read = (read_write == I2C_SMBUS_READ); + if (len == 1 && priv->is_read) + smbcmd |= SMBHSTCNT_LAST_BYTE; + priv->cmd = smbcmd | SMBHSTCNT_INTREN; + priv->len = len; + priv->count = 0; + priv->data = &data->block[1]; + + outb_p(priv->cmd | SMBHSTCNT_START, SMBHSTCNT(priv)); + wait_event(priv->waitq, (status = priv->status)); + priv->status = 0; + return i801_check_post(priv, status); + } + for (i = 1; i <= len; i++) { - if (i == len && read_write == I2C_SMBUS_READ) { - if (command == I2C_SMBUS_I2C_BLOCK_DATA) - smbcmd = I801_I2C_BLOCK_LAST; - else - smbcmd = I801_BLOCK_LAST; - } else { - if (command == I2C_SMBUS_I2C_BLOCK_DATA - && read_write == I2C_SMBUS_READ) - smbcmd = I801_I2C_BLOCK_DATA; - else - smbcmd = I801_BLOCK_DATA; - } - outb_p(smbcmd | ENABLE_INT9, SMBHSTCNT(priv)); + if (i == len && read_write == I2C_SMBUS_READ) + smbcmd |= SMBHSTCNT_LAST_BYTE; + outb_p(smbcmd, SMBHSTCNT(priv)); if (i == 1) - outb_p(inb(SMBHSTCNT(priv)) | I801_START, + outb_p(inb(SMBHSTCNT(priv)) | SMBHSTCNT_START, SMBHSTCNT(priv)); - /* We will always wait for a fraction of a second! */ - timeout = 0; - do { - usleep_range(250, 500); - status = inb_p(SMBHSTSTS(priv)); - } while ((!(status & SMBHSTSTS_BYTE_DONE)) - && (timeout++ < MAX_RETRIES)); - - result = i801_check_post(priv, status, timeout > MAX_RETRIES); - if (result < 0) - return result; + status = i801_wait_byte_done(priv); + if (status) + goto exit; if (i == 1 && read_write == I2C_SMBUS_READ && command != I2C_SMBUS_I2C_BLOCK_DATA) { @@ -416,10 +552,12 @@ static int i801_block_transaction_byte_by_byte(struct i801_priv *priv, outb_p(data->block[i+1], SMBBLKDAT(priv)); /* signals SMBBLKDAT ready */ - outb_p(SMBHSTSTS_BYTE_DONE | SMBHSTSTS_INTR, SMBHSTSTS(priv)); + outb_p(SMBHSTSTS_BYTE_DONE, SMBHSTSTS(priv)); } - return 0; + status = i801_wait_intr(priv); +exit: + return i801_check_post(priv, status); } static int i801_set_block_buffer_mode(struct i801_priv *priv) @@ -474,9 +612,6 @@ static int i801_block_transaction(struct i801_priv *priv, read_write, command, hwpec); - if (result == 0 && hwpec) - i801_wait_hwpec(priv); - if (command == I2C_SMBUS_I2C_BLOCK_DATA && read_write == I2C_SMBUS_WRITE) { /* restore saved configuration register value */ @@ -564,7 +699,7 @@ static s32 i801_access(struct i2c_adapter *adap, u16 addr, ret = i801_block_transaction(priv, data, read_write, size, hwpec); else - ret = i801_transaction(priv, xact | ENABLE_INT9); + ret = i801_transaction(priv, xact); /* Some BIOSes don't like it when PEC is enabled at reboot or resume time, so we forcibly disable it after every transaction. Turn off @@ -799,6 +934,16 @@ static int __devinit i801_probe(struct pci_dev *dev, break; } + /* IRQ processing tested on CougarPoint PCH, ICH5, ICH7-M and ICH10 */ + if (dev->device == PCI_DEVICE_ID_INTEL_COUGARPOINT_SMBUS || + dev->device == PCI_DEVICE_ID_INTEL_82801EB_3 || + dev->device == PCI_DEVICE_ID_INTEL_ICH7_17 || + dev->device == PCI_DEVICE_ID_INTEL_ICH8_5 || + dev->device == PCI_DEVICE_ID_INTEL_ICH9_6 || + dev->device == PCI_DEVICE_ID_INTEL_ICH10_4 || + dev->device == PCI_DEVICE_ID_INTEL_ICH10_5) + priv->features |= FEATURE_IRQ; + /* Disable features on user request */ for (i = 0; i < ARRAY_SIZE(i801_feature_names); i++) { if (priv->features & disable_features & (1 << i)) @@ -846,16 +991,30 @@ static int __devinit i801_probe(struct pci_dev *dev, } pci_write_config_byte(priv->pci_dev, SMBHSTCFG, temp); - if (temp & SMBHSTCFG_SMB_SMI_EN) + if (temp & SMBHSTCFG_SMB_SMI_EN) { dev_dbg(&dev->dev, "SMBus using interrupt SMI#\n"); - else - dev_dbg(&dev->dev, "SMBus using PCI Interrupt\n"); + /* Disable SMBus interrupt feature if SMBus using SMI# */ + priv->features &= ~FEATURE_IRQ; + } /* Clear special mode bits */ if (priv->features & (FEATURE_SMBUS_PEC | FEATURE_BLOCK_BUFFER)) outb_p(inb_p(SMBAUXCTL(priv)) & ~(SMBAUXCTL_CRC | SMBAUXCTL_E32B), SMBAUXCTL(priv)); + if (priv->features & FEATURE_IRQ) { + init_waitqueue_head(&priv->waitq); + + err = request_irq(dev->irq, i801_isr, IRQF_SHARED, + i801_driver.name, priv); + if (err) { + dev_err(&dev->dev, "Failed to allocate irq %d: %d\n", + dev->irq, err); + goto exit_release; + } + dev_info(&dev->dev, "SMBus using PCI Interrupt\n"); + } + /* set up the sysfs linkage to our parent device */ priv->adapter.dev.parent = &dev->dev; @@ -867,14 +1026,18 @@ static int __devinit i801_probe(struct pci_dev *dev, err = i2c_add_adapter(&priv->adapter); if (err) { dev_err(&dev->dev, "Failed to add SMBus adapter\n"); - goto exit_release; + goto exit_free_irq; } i801_probe_optional_slaves(priv); pci_set_drvdata(dev, priv); + return 0; +exit_free_irq: + if (priv->features & FEATURE_IRQ) + free_irq(dev->irq, priv); exit_release: pci_release_region(dev, SMBBAR); exit: @@ -888,7 +1051,11 @@ static void __devexit i801_remove(struct pci_dev *dev) i2c_del_adapter(&priv->adapter); pci_write_config_byte(dev, SMBHSTCFG, priv->original_hstcfg); + + if (priv->features & FEATURE_IRQ) + free_irq(dev->irq, priv); pci_release_region(dev, SMBBAR); + pci_set_drvdata(dev, NULL); kfree(priv); /* diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c index 8d6b504d65c..370031ac820 100644 --- a/drivers/i2c/busses/i2c-imx.c +++ b/drivers/i2c/busses/i2c-imx.c @@ -53,7 +53,6 @@ #include <linux/of_i2c.h> #include <linux/pinctrl/consumer.h> -#include <mach/irqs.h> #include <mach/hardware.h> #include <mach/i2c.h> diff --git a/drivers/i2c/busses/i2c-intel-mid.c b/drivers/i2c/busses/i2c-intel-mid.c index 365bad5b890..7c28f10f95c 100644 --- a/drivers/i2c/busses/i2c-intel-mid.c +++ b/drivers/i2c/busses/i2c-intel-mid.c @@ -1116,18 +1116,7 @@ static struct pci_driver intel_mid_i2c_driver = { .remove = __devexit_p(intel_mid_i2c_remove), }; -static int __init intel_mid_i2c_init(void) -{ - return pci_register_driver(&intel_mid_i2c_driver); -} - -static void __exit intel_mid_i2c_exit(void) -{ - pci_unregister_driver(&intel_mid_i2c_driver); -} - -module_init(intel_mid_i2c_init); -module_exit(intel_mid_i2c_exit); +module_pci_driver(intel_mid_i2c_driver); MODULE_AUTHOR("Ba Zheng <zheng.ba@intel.com>"); MODULE_DESCRIPTION("I2C driver for Moorestown Platform"); diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c index 43a96a12392..392303b4be0 100644 --- a/drivers/i2c/busses/i2c-nforce2.c +++ b/drivers/i2c/busses/i2c-nforce2.c @@ -453,16 +453,4 @@ static struct pci_driver nforce2_driver = { .remove = __devexit_p(nforce2_remove), }; -static int __init nforce2_init(void) -{ - return pci_register_driver(&nforce2_driver); -} - -static void __exit nforce2_exit(void) -{ - pci_unregister_driver(&nforce2_driver); -} - -module_init(nforce2_init); -module_exit(nforce2_exit); - +module_pci_driver(nforce2_driver); diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c index 5267ab93d55..a92440dbef0 100644 --- a/drivers/i2c/busses/i2c-nomadik.c +++ b/drivers/i2c/busses/i2c-nomadik.c @@ -965,8 +965,7 @@ static int __devinit nmk_i2c_probe(struct platform_device *pdev) adap->owner = THIS_MODULE; adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD; adap->algo = &nmk_i2c_algo; - adap->timeout = pdata->timeout ? msecs_to_jiffies(pdata->timeout) : - msecs_to_jiffies(20000); + adap->timeout = msecs_to_jiffies(pdata->timeout); snprintf(adap->name, sizeof(adap->name), "Nomadik I2C%d at %lx", pdev->id, (unsigned long)res->start); diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index 801df6000e9..c2148332de0 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -545,6 +545,8 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adap, if (dev->speed > 400) w |= OMAP_I2C_CON_OPMODE_HS; + if (msg->flags & I2C_M_STOP) + stop = 1; if (msg->flags & I2C_M_TEN) w |= OMAP_I2C_CON_XA; if (!(msg->flags & I2C_M_RD)) @@ -658,7 +660,8 @@ out: static u32 omap_i2c_func(struct i2c_adapter *adap) { - return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK); + return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK) | + I2C_FUNC_PROTOCOL_MANGLING; } static inline void diff --git a/drivers/i2c/busses/i2c-pasemi.c b/drivers/i2c/busses/i2c-pasemi.c index eaaea73209c..12edefd4183 100644 --- a/drivers/i2c/busses/i2c-pasemi.c +++ b/drivers/i2c/busses/i2c-pasemi.c @@ -415,19 +415,8 @@ static struct pci_driver pasemi_smb_driver = { .remove = __devexit_p(pasemi_smb_remove), }; -static int __init pasemi_smb_init(void) -{ - return pci_register_driver(&pasemi_smb_driver); -} - -static void __exit pasemi_smb_exit(void) -{ - pci_unregister_driver(&pasemi_smb_driver); -} +module_pci_driver(pasemi_smb_driver); MODULE_LICENSE("GPL"); MODULE_AUTHOR ("Olof Johansson <olof@lixom.net>"); MODULE_DESCRIPTION("PA Semi PWRficient SMBus driver"); - -module_init(pasemi_smb_init); -module_exit(pasemi_smb_exit); diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c index c14d48dd601..ef511df2c96 100644 --- a/drivers/i2c/busses/i2c-piix4.c +++ b/drivers/i2c/busses/i2c-piix4.c @@ -21,11 +21,12 @@ Supports: Intel PIIX4, 440MX Serverworks OSB4, CSB5, CSB6, HT-1000, HT-1100 - ATI IXP200, IXP300, IXP400, SB600, SB700, SB800 + ATI IXP200, IXP300, IXP400, SB600, SB700/SP5100, SB800 AMD Hudson-2 SMSC Victory66 - Note: we assume there can only be one device, with one SMBus interface. + Note: we assume there can only be one device, with one or more + SMBus interfaces. */ #include <linux/module.h> @@ -94,10 +95,8 @@ MODULE_PARM_DESC(force_addr, "Forcibly enable the PIIX4 at the given address. " "EXTREMELY DANGEROUS!"); -static unsigned short piix4_smba; static int srvrworks_csb5_delay; static struct pci_driver piix4_driver; -static struct i2c_adapter piix4_adapter; static struct dmi_system_id __devinitdata piix4_dmi_blacklist[] = { { @@ -127,10 +126,15 @@ static struct dmi_system_id __devinitdata piix4_dmi_ibm[] = { { }, }; +struct i2c_piix4_adapdata { + unsigned short smba; +}; + static int __devinit piix4_setup(struct pci_dev *PIIX4_dev, const struct pci_device_id *id) { unsigned char temp; + unsigned short piix4_smba; if ((PIIX4_dev->vendor == PCI_VENDOR_ID_SERVERWORKS) && (PIIX4_dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5)) @@ -206,7 +210,6 @@ static int __devinit piix4_setup(struct pci_dev *PIIX4_dev, dev_err(&PIIX4_dev->dev, "Host SMBus controller not enabled!\n"); release_region(piix4_smba, SMBIOSIZE); - piix4_smba = 0; return -ENODEV; } } @@ -224,12 +227,13 @@ static int __devinit piix4_setup(struct pci_dev *PIIX4_dev, "SMBus Host Controller at 0x%x, revision %d\n", piix4_smba, temp); - return 0; + return piix4_smba; } static int __devinit piix4_setup_sb800(struct pci_dev *PIIX4_dev, const struct pci_device_id *id) { + unsigned short piix4_smba; unsigned short smba_idx = 0xcd6; u8 smba_en_lo, smba_en_hi, i2ccfg, i2ccfg_offset = 0x10, smb_en = 0x2c; @@ -273,7 +277,6 @@ static int __devinit piix4_setup_sb800(struct pci_dev *PIIX4_dev, dev_err(&PIIX4_dev->dev, "SMBus I2C bus config region " "0x%x already in use!\n", piix4_smba + i2ccfg_offset); release_region(piix4_smba, SMBIOSIZE); - piix4_smba = 0; return -EBUSY; } i2ccfg = inb_p(piix4_smba + i2ccfg_offset); @@ -288,30 +291,72 @@ static int __devinit piix4_setup_sb800(struct pci_dev *PIIX4_dev, "SMBus Host Controller at 0x%x, revision %d\n", piix4_smba, i2ccfg >> 4); - return 0; + return piix4_smba; +} + +static int __devinit piix4_setup_aux(struct pci_dev *PIIX4_dev, + const struct pci_device_id *id, + unsigned short base_reg_addr) +{ + /* Set up auxiliary SMBus controllers found on some + * AMD chipsets e.g. SP5100 (SB700 derivative) */ + + unsigned short piix4_smba; + + /* Read address of auxiliary SMBus controller */ + pci_read_config_word(PIIX4_dev, base_reg_addr, &piix4_smba); + if ((piix4_smba & 1) == 0) { + dev_dbg(&PIIX4_dev->dev, + "Auxiliary SMBus controller not enabled\n"); + return -ENODEV; + } + + piix4_smba &= 0xfff0; + if (piix4_smba == 0) { + dev_dbg(&PIIX4_dev->dev, + "Auxiliary SMBus base address uninitialized\n"); + return -ENODEV; + } + + if (acpi_check_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) + return -ENODEV; + + if (!request_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) { + dev_err(&PIIX4_dev->dev, "Auxiliary SMBus region 0x%x " + "already in use!\n", piix4_smba); + return -EBUSY; + } + + dev_info(&PIIX4_dev->dev, + "Auxiliary SMBus Host Controller at 0x%x\n", + piix4_smba); + + return piix4_smba; } -static int piix4_transaction(void) +static int piix4_transaction(struct i2c_adapter *piix4_adapter) { + struct i2c_piix4_adapdata *adapdata = i2c_get_adapdata(piix4_adapter); + unsigned short piix4_smba = adapdata->smba; int temp; int result = 0; int timeout = 0; - dev_dbg(&piix4_adapter.dev, "Transaction (pre): CNT=%02x, CMD=%02x, " + dev_dbg(&piix4_adapter->dev, "Transaction (pre): CNT=%02x, CMD=%02x, " "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT), inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0), inb_p(SMBHSTDAT1)); /* Make sure the SMBus host is ready to start transmitting */ if ((temp = inb_p(SMBHSTSTS)) != 0x00) { - dev_dbg(&piix4_adapter.dev, "SMBus busy (%02x). " + dev_dbg(&piix4_adapter->dev, "SMBus busy (%02x). " "Resetting...\n", temp); outb_p(temp, SMBHSTSTS); if ((temp = inb_p(SMBHSTSTS)) != 0x00) { - dev_err(&piix4_adapter.dev, "Failed! (%02x)\n", temp); + dev_err(&piix4_adapter->dev, "Failed! (%02x)\n", temp); return -EBUSY; } else { - dev_dbg(&piix4_adapter.dev, "Successful!\n"); + dev_dbg(&piix4_adapter->dev, "Successful!\n"); } } @@ -330,35 +375,35 @@ static int piix4_transaction(void) /* If the SMBus is still busy, we give up */ if (timeout == MAX_TIMEOUT) { - dev_err(&piix4_adapter.dev, "SMBus Timeout!\n"); + dev_err(&piix4_adapter->dev, "SMBus Timeout!\n"); result = -ETIMEDOUT; } if (temp & 0x10) { result = -EIO; - dev_err(&piix4_adapter.dev, "Error: Failed bus transaction\n"); + dev_err(&piix4_adapter->dev, "Error: Failed bus transaction\n"); } if (temp & 0x08) { result = -EIO; - dev_dbg(&piix4_adapter.dev, "Bus collision! SMBus may be " + dev_dbg(&piix4_adapter->dev, "Bus collision! SMBus may be " "locked until next hard reset. (sorry!)\n"); /* Clock stops and slave is stuck in mid-transmission */ } if (temp & 0x04) { result = -ENXIO; - dev_dbg(&piix4_adapter.dev, "Error: no response!\n"); + dev_dbg(&piix4_adapter->dev, "Error: no response!\n"); } if (inb_p(SMBHSTSTS) != 0x00) outb_p(inb(SMBHSTSTS), SMBHSTSTS); if ((temp = inb_p(SMBHSTSTS)) != 0x00) { - dev_err(&piix4_adapter.dev, "Failed reset at end of " + dev_err(&piix4_adapter->dev, "Failed reset at end of " "transaction (%02x)\n", temp); } - dev_dbg(&piix4_adapter.dev, "Transaction (post): CNT=%02x, CMD=%02x, " + dev_dbg(&piix4_adapter->dev, "Transaction (post): CNT=%02x, CMD=%02x, " "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT), inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0), inb_p(SMBHSTDAT1)); @@ -370,6 +415,8 @@ static s32 piix4_access(struct i2c_adapter * adap, u16 addr, unsigned short flags, char read_write, u8 command, int size, union i2c_smbus_data * data) { + struct i2c_piix4_adapdata *adapdata = i2c_get_adapdata(adap); + unsigned short piix4_smba = adapdata->smba; int i, len; int status; @@ -426,7 +473,7 @@ static s32 piix4_access(struct i2c_adapter * adap, u16 addr, outb_p((size & 0x1C) + (ENABLE_INT9 & 1), SMBHSTCNT); - status = piix4_transaction(); + status = piix4_transaction(adap); if (status) return status; @@ -466,12 +513,6 @@ static const struct i2c_algorithm smbus_algorithm = { .functionality = piix4_func, }; -static struct i2c_adapter piix4_adapter = { - .owner = THIS_MODULE, - .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, - .algo = &smbus_algorithm, -}; - static DEFINE_PCI_DEVICE_TABLE(piix4_ids) = { { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443MX_3) }, @@ -496,6 +537,57 @@ static DEFINE_PCI_DEVICE_TABLE(piix4_ids) = { MODULE_DEVICE_TABLE (pci, piix4_ids); +static struct i2c_adapter *piix4_main_adapter; +static struct i2c_adapter *piix4_aux_adapter; + +static int __devinit piix4_add_adapter(struct pci_dev *dev, + unsigned short smba, + struct i2c_adapter **padap) +{ + struct i2c_adapter *adap; + struct i2c_piix4_adapdata *adapdata; + int retval; + + adap = kzalloc(sizeof(*adap), GFP_KERNEL); + if (adap == NULL) { + release_region(smba, SMBIOSIZE); + return -ENOMEM; + } + + adap->owner = THIS_MODULE; + adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD; + adap->algo = &smbus_algorithm; + + adapdata = kzalloc(sizeof(*adapdata), GFP_KERNEL); + if (adapdata == NULL) { + kfree(adap); + release_region(smba, SMBIOSIZE); + return -ENOMEM; + } + + adapdata->smba = smba; + + /* set up the sysfs linkage to our parent device */ + adap->dev.parent = &dev->dev; + + snprintf(adap->name, sizeof(adap->name), + "SMBus PIIX4 adapter at %04x", smba); + + i2c_set_adapdata(adap, adapdata); + + retval = i2c_add_adapter(adap); + if (retval) { + dev_err(&dev->dev, "Couldn't register adapter!\n"); + kfree(adapdata); + kfree(adap); + release_region(smba, SMBIOSIZE); + return retval; + } + + *padap = adap; + return 0; +} + static int __devinit piix4_probe(struct pci_dev *dev, const struct pci_device_id *id) { @@ -510,30 +602,52 @@ static int __devinit piix4_probe(struct pci_dev *dev, else retval = piix4_setup(dev, id); - if (retval) + /* If no main SMBus found, give up */ + if (retval < 0) return retval; - /* set up the sysfs linkage to our parent device */ - piix4_adapter.dev.parent = &dev->dev; - - snprintf(piix4_adapter.name, sizeof(piix4_adapter.name), - "SMBus PIIX4 adapter at %04x", piix4_smba); + /* Try to register main SMBus adapter, give up if we can't */ + retval = piix4_add_adapter(dev, retval, &piix4_main_adapter); + if (retval < 0) + return retval; - if ((retval = i2c_add_adapter(&piix4_adapter))) { - dev_err(&dev->dev, "Couldn't register adapter!\n"); - release_region(piix4_smba, SMBIOSIZE); - piix4_smba = 0; + /* Check for auxiliary SMBus on some AMD chipsets */ + if (dev->vendor == PCI_VENDOR_ID_ATI && + dev->device == PCI_DEVICE_ID_ATI_SBX00_SMBUS && + dev->revision < 0x40) { + retval = piix4_setup_aux(dev, id, 0x58); + if (retval > 0) { + /* Try to add the aux adapter if it exists, + * piix4_add_adapter will clean up if this fails */ + piix4_add_adapter(dev, retval, &piix4_aux_adapter); + } } - return retval; + return 0; +} + +static void __devexit piix4_adap_remove(struct i2c_adapter *adap) +{ + struct i2c_piix4_adapdata *adapdata = i2c_get_adapdata(adap); + + if (adapdata->smba) { + i2c_del_adapter(adap); + release_region(adapdata->smba, SMBIOSIZE); + kfree(adapdata); + kfree(adap); + } } static void __devexit piix4_remove(struct pci_dev *dev) { - if (piix4_smba) { - i2c_del_adapter(&piix4_adapter); - release_region(piix4_smba, SMBIOSIZE); - piix4_smba = 0; + if (piix4_main_adapter) { + piix4_adap_remove(piix4_main_adapter); + piix4_main_adapter = NULL; + } + + if (piix4_aux_adapter) { + piix4_adap_remove(piix4_aux_adapter); + piix4_aux_adapter = NULL; } } @@ -544,20 +658,9 @@ static struct pci_driver piix4_driver = { .remove = __devexit_p(piix4_remove), }; -static int __init i2c_piix4_init(void) -{ - return pci_register_driver(&piix4_driver); -} - -static void __exit i2c_piix4_exit(void) -{ - pci_unregister_driver(&piix4_driver); -} +module_pci_driver(piix4_driver); MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl> and " "Philip Edelbrock <phil@netroedge.com>"); MODULE_DESCRIPTION("PIIX4 SMBus driver"); MODULE_LICENSE("GPL"); - -module_init(i2c_piix4_init); -module_exit(i2c_piix4_exit); diff --git a/drivers/i2c/busses/i2c-powermac.c b/drivers/i2c/busses/i2c-powermac.c index 31c47e18d83..5285f8565de 100644 --- a/drivers/i2c/busses/i2c-powermac.c +++ b/drivers/i2c/busses/i2c-powermac.c @@ -227,28 +227,138 @@ static int __devexit i2c_powermac_remove(struct platform_device *dev) return 0; } +static u32 __devinit i2c_powermac_get_addr(struct i2c_adapter *adap, + struct pmac_i2c_bus *bus, + struct device_node *node) +{ + const __be32 *prop; + int len; + + /* First check for valid "reg" */ + prop = of_get_property(node, "reg", &len); + if (prop && (len >= sizeof(int))) + return (be32_to_cpup(prop) & 0xff) >> 1; + + /* Then check old-style "i2c-address" */ + prop = of_get_property(node, "i2c-address", &len); + if (prop && (len >= sizeof(int))) + return (be32_to_cpup(prop) & 0xff) >> 1; + + /* Now handle some devices with missing "reg" properties */ + if (!strcmp(node->name, "cereal")) + return 0x60; + else if (!strcmp(node->name, "deq")) + return 0x34; + + dev_warn(&adap->dev, "No i2c address for %s\n", node->full_name); + + return 0xffffffff; +} + +static void __devinit i2c_powermac_create_one(struct i2c_adapter *adap, + const char *type, + u32 addr) +{ + struct i2c_board_info info = {}; + struct i2c_client *newdev; + + strncpy(info.type, type, sizeof(info.type)); + info.addr = addr; + newdev = i2c_new_device(adap, &info); + if (!newdev) + dev_err(&adap->dev, + "i2c-powermac: Failure to register missing %s\n", + type); +} + +static void __devinit i2c_powermac_add_missing(struct i2c_adapter *adap, + struct pmac_i2c_bus *bus, + bool found_onyx) +{ + struct device_node *busnode = pmac_i2c_get_bus_node(bus); + int rc; + + /* Check for the onyx audio codec */ +#define ONYX_REG_CONTROL 67 + if (of_device_is_compatible(busnode, "k2-i2c") && !found_onyx) { + union i2c_smbus_data data; + + rc = i2c_smbus_xfer(adap, 0x46, 0, I2C_SMBUS_READ, + ONYX_REG_CONTROL, I2C_SMBUS_BYTE_DATA, + &data); + if (rc >= 0) + i2c_powermac_create_one(adap, "MAC,pcm3052", 0x46); + + rc = i2c_smbus_xfer(adap, 0x47, 0, I2C_SMBUS_READ, + ONYX_REG_CONTROL, I2C_SMBUS_BYTE_DATA, + &data); + if (rc >= 0) + i2c_powermac_create_one(adap, "MAC,pcm3052", 0x47); + } +} + +static bool __devinit i2c_powermac_get_type(struct i2c_adapter *adap, + struct device_node *node, + u32 addr, char *type, int type_size) +{ + char tmp[16]; + + /* Note: we to _NOT_ want the standard + * i2c drivers to match with any of our powermac stuff + * unless they have been specifically modified to handle + * it on a case by case basis. For example, for thermal + * control, things like lm75 etc... shall match with their + * corresponding windfarm drivers, _NOT_ the generic ones, + * so we force a prefix of AAPL, onto the modalias to + * make that happen + */ + + /* First try proper modalias */ + if (of_modalias_node(node, tmp, sizeof(tmp)) >= 0) { + snprintf(type, type_size, "MAC,%s", tmp); + return true; + } + + /* Now look for known workarounds */ + if (!strcmp(node->name, "deq")) { + /* Apple uses address 0x34 for TAS3001 and 0x35 for TAS3004 */ + if (addr == 0x34) { + snprintf(type, type_size, "MAC,tas3001"); + return true; + } else if (addr == 0x35) { + snprintf(type, type_size, "MAC,tas3004"); + return true; + } + } + + dev_err(&adap->dev, "i2c-powermac: modalias failure" + " on %s\n", node->full_name); + return false; +} + static void __devinit i2c_powermac_register_devices(struct i2c_adapter *adap, struct pmac_i2c_bus *bus) { struct i2c_client *newdev; struct device_node *node; + bool found_onyx = 0; + + /* + * In some cases we end up with the via-pmu node itself, in this + * case we skip this function completely as the device-tree will + * not contain anything useful. + */ + if (!strcmp(adap->dev.of_node->name, "via-pmu")) + return; for_each_child_of_node(adap->dev.of_node, node) { struct i2c_board_info info = {}; - struct dev_archdata dev_ad = {}; - const __be32 *reg; - char tmp[16]; u32 addr; - int len; /* Get address & channel */ - reg = of_get_property(node, "reg", &len); - if (!reg || (len < sizeof(int))) { - dev_err(&adap->dev, "i2c-powermac: invalid reg on %s\n", - node->full_name); + addr = i2c_powermac_get_addr(adap, bus, node); + if (addr == 0xffffffff) continue; - } - addr = be32_to_cpup(reg); /* Multibus setup, check channel */ if (!pmac_i2c_match_adapter(node, adap)) @@ -257,27 +367,23 @@ static void __devinit i2c_powermac_register_devices(struct i2c_adapter *adap, dev_dbg(&adap->dev, "i2c-powermac: register %s\n", node->full_name); - /* Make up a modalias. Note: we to _NOT_ want the standard - * i2c drivers to match with any of our powermac stuff - * unless they have been specifically modified to handle - * it on a case by case basis. For example, for thermal - * control, things like lm75 etc... shall match with their - * corresponding windfarm drivers, _NOT_ the generic ones, - * so we force a prefix of AAPL, onto the modalias to - * make that happen + /* + * Keep track of some device existence to handle + * workarounds later. */ - if (of_modalias_node(node, tmp, sizeof(tmp)) < 0) { - dev_err(&adap->dev, "i2c-powermac: modalias failure" - " on %s\n", node->full_name); + if (of_device_is_compatible(node, "pcm3052")) + found_onyx = true; + + /* Make up a modalias */ + if (!i2c_powermac_get_type(adap, node, addr, + info.type, sizeof(info.type))) { continue; } - snprintf(info.type, sizeof(info.type), "MAC,%s", tmp); /* Fill out the rest of the info structure */ - info.addr = (addr & 0xff) >> 1; + info.addr = addr; info.irq = irq_of_parse_and_map(node, 0); info.of_node = of_node_get(node); - info.archdata = &dev_ad; newdev = i2c_new_device(adap, &info); if (!newdev) { @@ -292,6 +398,9 @@ static void __devinit i2c_powermac_register_devices(struct i2c_adapter *adap, continue; } } + + /* Additional workarounds */ + i2c_powermac_add_missing(adap, bus, found_onyx); } static int __devinit i2c_powermac_probe(struct platform_device *dev) diff --git a/drivers/i2c/busses/i2c-pxa-pci.c b/drivers/i2c/busses/i2c-pxa-pci.c index a0581798055..4dc9bef17d7 100644 --- a/drivers/i2c/busses/i2c-pxa-pci.c +++ b/drivers/i2c/busses/i2c-pxa-pci.c @@ -163,17 +163,7 @@ static struct pci_driver ce4100_i2c_driver = { .remove = __devexit_p(ce4100_i2c_remove), }; -static int __init ce4100_i2c_init(void) -{ - return pci_register_driver(&ce4100_i2c_driver); -} -module_init(ce4100_i2c_init); - -static void __exit ce4100_i2c_exit(void) -{ - pci_unregister_driver(&ce4100_i2c_driver); -} -module_exit(ce4100_i2c_exit); +module_pci_driver(ce4100_i2c_driver); MODULE_DESCRIPTION("CE4100 PCI-I2C glue code for PXA's driver"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/i2c/busses/i2c-sis630.c b/drivers/i2c/busses/i2c-sis630.c index 15cf78f65ce..5d6723b7525 100644 --- a/drivers/i2c/busses/i2c-sis630.c +++ b/drivers/i2c/busses/i2c-sis630.c @@ -513,21 +513,8 @@ static struct pci_driver sis630_driver = { .remove = __devexit_p(sis630_remove), }; -static int __init i2c_sis630_init(void) -{ - return pci_register_driver(&sis630_driver); -} - - -static void __exit i2c_sis630_exit(void) -{ - pci_unregister_driver(&sis630_driver); -} - +module_pci_driver(sis630_driver); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Alexander Malysh <amalysh@web.de>"); MODULE_DESCRIPTION("SIS630 SMBus driver"); - -module_init(i2c_sis630_init); -module_exit(i2c_sis630_exit); diff --git a/drivers/i2c/busses/i2c-sis96x.c b/drivers/i2c/busses/i2c-sis96x.c index cc5d149413f..7b72614a9bc 100644 --- a/drivers/i2c/busses/i2c-sis96x.c +++ b/drivers/i2c/busses/i2c-sis96x.c @@ -324,21 +324,8 @@ static struct pci_driver sis96x_driver = { .remove = __devexit_p(sis96x_remove), }; -static int __init i2c_sis96x_init(void) -{ - return pci_register_driver(&sis96x_driver); -} - -static void __exit i2c_sis96x_exit(void) -{ - pci_unregister_driver(&sis96x_driver); -} +module_pci_driver(sis96x_driver); MODULE_AUTHOR("Mark M. Hoffman <mhoffman@lightlink.com>"); MODULE_DESCRIPTION("SiS96x SMBus driver"); MODULE_LICENSE("GPL"); - -/* Register initialization functions using helper macros */ -module_init(i2c_sis96x_init); -module_exit(i2c_sis96x_exit); - diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c index 8b2e555a956..3da7ee3eb50 100644 --- a/drivers/i2c/busses/i2c-tegra.c +++ b/drivers/i2c/busses/i2c-tegra.c @@ -341,7 +341,7 @@ static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev) u32 val; int err = 0; - clk_enable(i2c_dev->clk); + clk_prepare_enable(i2c_dev->clk); tegra_periph_reset_assert(i2c_dev->clk); udelay(2); @@ -372,7 +372,7 @@ static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev) if (tegra_i2c_flush_fifos(i2c_dev)) err = -ETIMEDOUT; - clk_disable(i2c_dev->clk); + clk_disable_unprepare(i2c_dev->clk); if (i2c_dev->irq_disabled) { i2c_dev->irq_disabled = 0; @@ -546,14 +546,14 @@ static int tegra_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], if (i2c_dev->is_suspended) return -EBUSY; - clk_enable(i2c_dev->clk); + clk_prepare_enable(i2c_dev->clk); for (i = 0; i < num; i++) { int stop = (i == (num - 1)) ? 1 : 0; ret = tegra_i2c_xfer_msg(i2c_dev, &msgs[i], stop); if (ret) break; } - clk_disable(i2c_dev->clk); + clk_disable_unprepare(i2c_dev->clk); return ret ?: i; } @@ -666,7 +666,7 @@ static int __devinit tegra_i2c_probe(struct platform_device *pdev) goto err_free; } - clk_enable(i2c_dev->i2c_clk); + clk_prepare_enable(i2c_dev->i2c_clk); i2c_set_adapdata(&i2c_dev->adapter, i2c_dev); i2c_dev->adapter.owner = THIS_MODULE; diff --git a/drivers/i2c/busses/i2c-tiny-usb.c b/drivers/i2c/busses/i2c-tiny-usb.c index f07307ff360..05106368d40 100644 --- a/drivers/i2c/busses/i2c-tiny-usb.c +++ b/drivers/i2c/busses/i2c-tiny-usb.c @@ -143,6 +143,7 @@ static const struct i2c_algorithm usb_algorithm = { static const struct usb_device_id i2c_tiny_usb_table[] = { { USB_DEVICE(0x0403, 0xc631) }, /* FTDI */ { USB_DEVICE(0x1c40, 0x0534) }, /* EZPrototypes */ + { USB_DEVICE(0x1964, 0x0001) }, /* Robofuzz OSIF */ { } /* Terminating entry */ }; diff --git a/drivers/i2c/busses/i2c-via.c b/drivers/i2c/busses/i2c-via.c index 713d31ade26..7ffee71ca19 100644 --- a/drivers/i2c/busses/i2c-via.c +++ b/drivers/i2c/busses/i2c-via.c @@ -161,20 +161,8 @@ static struct pci_driver vt586b_driver = { .remove = __devexit_p(vt586b_remove), }; -static int __init i2c_vt586b_init(void) -{ - return pci_register_driver(&vt586b_driver); -} - -static void __exit i2c_vt586b_exit(void) -{ - pci_unregister_driver(&vt586b_driver); -} - +module_pci_driver(vt586b_driver); MODULE_AUTHOR("Kyösti Mälkki <kmalkki@cc.hut.fi>"); MODULE_DESCRIPTION("i2c for Via vt82c586b southbridge"); MODULE_LICENSE("GPL"); - -module_init(i2c_vt586b_init); -module_exit(i2c_vt586b_exit); |