diff options
Diffstat (limited to 'drivers/i2c/busses')
25 files changed, 1996 insertions, 271 deletions
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index b04c99580d0..48438cc5d0c 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -100,9 +100,12 @@ config I2C_AU1550 config I2C_BLACKFIN_TWI tristate "Blackfin TWI I2C support" - depends on BF534 || BF536 || BF537 + depends on BLACKFIN help - This is the TWI I2C device driver for Blackfin 534/536/537/54x. + This is the TWI I2C device driver for Blackfin BF522, BF525, + BF527, BF534, BF536, BF537 and BF54x. For other Blackfin processors, + please don't use this driver. + This driver can also be built as a module. If so, the module will be called i2c-bfin-twi. @@ -135,7 +138,7 @@ config I2C_ELEKTOR This supports the PCF8584 ISA bus I2C adapter. Say Y if you own such an adapter. - This support is also available as a module. If so, the module + This support is also available as a module. If so, the module will be called i2c-elektor. config I2C_GPIO @@ -190,7 +193,7 @@ config I2C_I810 select I2C_ALGOBIT help If you say yes to this option, support will be included for the Intel - 810/815 family of mainboard I2C interfaces. Specifically, the + 810/815 family of mainboard I2C interfaces. Specifically, the following versions of the chipset are supported: i810AA i810AB @@ -246,10 +249,10 @@ config I2C_PIIX4 config I2C_IBM_IIC tristate "IBM PPC 4xx on-chip I2C interface" - depends on IBM_OCP + depends on 4xx help - Say Y here if you want to use IIC peripheral found on - embedded IBM PPC 4xx based systems. + Say Y here if you want to use IIC peripheral found on + embedded IBM PPC 4xx based systems. This driver can also be built as a module. If so, the module will be called i2c-ibm_iic. @@ -269,7 +272,7 @@ config I2C_IXP2000 depends on ARCH_IXP2000 select I2C_ALGOBIT help - Say Y here if you have an Intel IXP2000 (2400, 2800, 2850) based + Say Y here if you have an Intel IXP2000 (2400, 2800, 2850) based system and are using GPIO lines for an I2C bus. This support is also available as a module. If so, the module @@ -354,7 +357,7 @@ config I2C_PARPORT on the parport driver. This is meant for embedded systems. Don't say Y here if you intend to say Y or M there. - This support is also available as a module. If so, the module + This support is also available as a module. If so, the module will be called i2c-parport. config I2C_PARPORT_LIGHT @@ -372,12 +375,12 @@ config I2C_PARPORT_LIGHT the clean but heavy parport handling is not an option. The drawback is a reduced portability and the impossibility to daisy-chain other parallel port devices. - + Don't say Y here if you said Y or M to i2c-parport. Saying M to both is possible but both modules should not be loaded at the same time. - This support is also available as a module. If so, the module + This support is also available as a module. If so, the module will be called i2c-parport-light. config I2C_PASEMI @@ -401,7 +404,7 @@ config I2C_PROSAVAGE This driver is deprecated in favor of the savagefb driver. - This support is also available as a module. If so, the module + This support is also available as a module. If so, the module will be called i2c-prosavage. config I2C_S3C2410 @@ -417,7 +420,7 @@ config I2C_SAVAGE4 depends on PCI select I2C_ALGOBIT help - If you say yes to this option, support will be included for the + If you say yes to this option, support will be included for the S3 Savage 4 I2C interface. This driver is deprecated in favor of the savagefb driver. @@ -452,7 +455,7 @@ config SCx200_I2C If you don't know what to do here, say N. - This support is also available as a module. If so, the module + This support is also available as a module. If so, the module will be called scx200_i2c. This driver is deprecated and will be dropped soon. Use i2c-gpio @@ -483,14 +486,14 @@ config SCx200_ACB If you don't know what to do here, say N. - This support is also available as a module. If so, the module + This support is also available as a module. If so, the module will be called scx200_acb. config I2C_SIS5595 tristate "SiS 5595" depends on PCI help - If you say yes to this option, support will be included for the + If you say yes to this option, support will be included for the SiS5595 SMBus (a subset of I2C) interface. This driver can also be built as a module. If so, the module @@ -500,7 +503,7 @@ config I2C_SIS630 tristate "SiS 630/730" depends on PCI help - If you say yes to this option, support will be included for the + If you say yes to this option, support will be included for the SiS630 and SiS730 SMBus (a subset of I2C) interface. This driver can also be built as a module. If so, the module @@ -632,9 +635,9 @@ config I2C_PCA_ISA select I2C_ALGOPCA default n help - This driver supports ISA boards using the Philips PCA 9564 - Parallel bus to I2C bus controller - + This driver supports ISA boards using the Philips PCA9564 + parallel bus to I2C bus controller. + This driver can also be built as a module. If so, the module will be called i2c-pca-isa. @@ -643,6 +646,17 @@ config I2C_PCA_ISA delays when I2C/SMBus chip drivers are loaded (e.g. at boot time). If unsure, say N. +config I2C_PCA_PLATFORM + tristate "PCA9564 as platform device" + select I2C_ALGOPCA + default n + help + This driver supports a memory mapped Philips PCA9564 + parallel bus to I2C bus controller. + + This driver can also be built as a module. If so, the module + will be called i2c-pca-platform. + config I2C_MV64XXX tristate "Marvell mv64xxx I2C Controller" depends on (MV64X60 || PLAT_ORION) && EXPERIMENTAL @@ -672,4 +686,23 @@ config I2C_PMCMSP This driver can also be built as module. If so, the module will be called i2c-pmcmsp. +config I2C_SH7760 + tristate "Renesas SH7760 I2C Controller" + depends on CPU_SUBTYPE_SH7760 + help + This driver supports the 2 I2C interfaces on the Renesas SH7760. + + This driver can also be built as a module. If so, the module + will be called i2c-sh7760. + +config I2C_SH_MOBILE + tristate "SuperH Mobile I2C Controller" + depends on SUPERH + help + If you say yes to this option, support will be included for the + built-in I2C interface on the Renesas SH-Mobile processor. + + This driver can also be built as a module. If so, the module + will be called i2c-sh_mobile. + endmenu diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index ea7068f1eb6..e8c882a5ea6 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -30,6 +30,7 @@ obj-$(CONFIG_I2C_PARPORT) += i2c-parport.o obj-$(CONFIG_I2C_PARPORT_LIGHT) += i2c-parport-light.o obj-$(CONFIG_I2C_PASEMI) += i2c-pasemi.o obj-$(CONFIG_I2C_PCA_ISA) += i2c-pca-isa.o +obj-$(CONFIG_I2C_PCA_PLATFORM) += i2c-pca-platform.o obj-$(CONFIG_I2C_PIIX4) += i2c-piix4.o obj-$(CONFIG_I2C_PMCMSP) += i2c-pmcmsp.o obj-$(CONFIG_I2C_PNX) += i2c-pnx.o @@ -37,6 +38,8 @@ obj-$(CONFIG_I2C_PROSAVAGE) += i2c-prosavage.o obj-$(CONFIG_I2C_PXA) += i2c-pxa.o obj-$(CONFIG_I2C_S3C2410) += i2c-s3c2410.o obj-$(CONFIG_I2C_SAVAGE4) += i2c-savage4.o +obj-$(CONFIG_I2C_SH7760) += i2c-sh7760.o +obj-$(CONFIG_I2C_SH_MOBILE) += i2c-sh_mobile.o obj-$(CONFIG_I2C_SIBYTE) += i2c-sibyte.o obj-$(CONFIG_I2C_SIMTEC) += i2c-simtec.o obj-$(CONFIG_I2C_SIS5595) += i2c-sis5595.o diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c index c09b036913b..73d61946a53 100644 --- a/drivers/i2c/busses/i2c-at91.c +++ b/drivers/i2c/busses/i2c-at91.c @@ -298,7 +298,7 @@ static int at91_i2c_resume(struct platform_device *pdev) #endif /* work with "modprobe at91_i2c" from hotplugging or coldplugging */ -MODULE_ALIAS("at91_i2c"); +MODULE_ALIAS("platform:at91_i2c"); static struct platform_driver at91_i2c_driver = { .probe = at91_i2c_probe, diff --git a/drivers/i2c/busses/i2c-au1550.c b/drivers/i2c/busses/i2c-au1550.c index 1953b26da56..491718fe46b 100644 --- a/drivers/i2c/busses/i2c-au1550.c +++ b/drivers/i2c/busses/i2c-au1550.c @@ -472,6 +472,7 @@ i2c_au1550_exit(void) MODULE_AUTHOR("Dan Malek, Embedded Edge, LLC."); MODULE_DESCRIPTION("SMBus adapter Alchemy pb1550"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:au1xpsc_smbus"); module_init (i2c_au1550_init); module_exit (i2c_au1550_exit); diff --git a/drivers/i2c/busses/i2c-bfin-twi.c b/drivers/i2c/busses/i2c-bfin-twi.c index 7dbdaeb707a..48d084bdf7c 100644 --- a/drivers/i2c/busses/i2c-bfin-twi.c +++ b/drivers/i2c/busses/i2c-bfin-twi.c @@ -1,25 +1,11 @@ /* - * drivers/i2c/busses/i2c-bfin-twi.c + * Blackfin On-Chip Two Wire Interface Driver * - * Description: Driver for Blackfin Two Wire Interface + * Copyright 2005-2007 Analog Devices Inc. * - * Author: sonicz <sonic.zhang@analog.com> + * Enter bugs at http://blackfin.uclinux.org/ * - * Copyright (c) 2005-2007 Analog Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * Licensed under the GPL-2 or later. */ #include <linux/module.h> @@ -34,14 +20,16 @@ #include <linux/platform_device.h> #include <asm/blackfin.h> +#include <asm/portmux.h> #include <asm/irq.h> #define POLL_TIMEOUT (2 * HZ) /* SMBus mode*/ -#define TWI_I2C_MODE_STANDARD 0x01 -#define TWI_I2C_MODE_STANDARDSUB 0x02 -#define TWI_I2C_MODE_COMBINED 0x04 +#define TWI_I2C_MODE_STANDARD 1 +#define TWI_I2C_MODE_STANDARDSUB 2 +#define TWI_I2C_MODE_COMBINED 3 +#define TWI_I2C_MODE_REPEAT 4 struct bfin_twi_iface { int irq; @@ -58,39 +46,74 @@ struct bfin_twi_iface { struct timer_list timeout_timer; struct i2c_adapter adap; struct completion complete; + struct i2c_msg *pmsg; + int msg_num; + int cur_msg; + void __iomem *regs_base; }; -static struct bfin_twi_iface twi_iface; + +#define DEFINE_TWI_REG(reg, off) \ +static inline u16 read_##reg(struct bfin_twi_iface *iface) \ + { return bfin_read16(iface->regs_base + (off)); } \ +static inline void write_##reg(struct bfin_twi_iface *iface, u16 v) \ + { bfin_write16(iface->regs_base + (off), v); } + +DEFINE_TWI_REG(CLKDIV, 0x00) +DEFINE_TWI_REG(CONTROL, 0x04) +DEFINE_TWI_REG(SLAVE_CTL, 0x08) +DEFINE_TWI_REG(SLAVE_STAT, 0x0C) +DEFINE_TWI_REG(SLAVE_ADDR, 0x10) +DEFINE_TWI_REG(MASTER_CTL, 0x14) +DEFINE_TWI_REG(MASTER_STAT, 0x18) +DEFINE_TWI_REG(MASTER_ADDR, 0x1C) +DEFINE_TWI_REG(INT_STAT, 0x20) +DEFINE_TWI_REG(INT_MASK, 0x24) +DEFINE_TWI_REG(FIFO_CTL, 0x28) +DEFINE_TWI_REG(FIFO_STAT, 0x2C) +DEFINE_TWI_REG(XMT_DATA8, 0x80) +DEFINE_TWI_REG(XMT_DATA16, 0x84) +DEFINE_TWI_REG(RCV_DATA8, 0x88) +DEFINE_TWI_REG(RCV_DATA16, 0x8C) + +static const u16 pin_req[2][3] = { + {P_TWI0_SCL, P_TWI0_SDA, 0}, + {P_TWI1_SCL, P_TWI1_SDA, 0}, +}; static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface) { - unsigned short twi_int_status = bfin_read_TWI_INT_STAT(); - unsigned short mast_stat = bfin_read_TWI_MASTER_STAT(); + unsigned short twi_int_status = read_INT_STAT(iface); + unsigned short mast_stat = read_MASTER_STAT(iface); if (twi_int_status & XMTSERV) { /* Transmit next data */ if (iface->writeNum > 0) { - bfin_write_TWI_XMT_DATA8(*(iface->transPtr++)); + write_XMT_DATA8(iface, *(iface->transPtr++)); iface->writeNum--; } /* start receive immediately after complete sending in * combine mode. */ - else if (iface->cur_mode == TWI_I2C_MODE_COMBINED) { - bfin_write_TWI_MASTER_CTL(bfin_read_TWI_MASTER_CTL() - | MDIR | RSTART); - } else if (iface->manual_stop) - bfin_write_TWI_MASTER_CTL(bfin_read_TWI_MASTER_CTL() - | STOP); + else if (iface->cur_mode == TWI_I2C_MODE_COMBINED) + write_MASTER_CTL(iface, + read_MASTER_CTL(iface) | MDIR | RSTART); + else if (iface->manual_stop) + write_MASTER_CTL(iface, + read_MASTER_CTL(iface) | STOP); + else if (iface->cur_mode == TWI_I2C_MODE_REPEAT && + iface->cur_msg+1 < iface->msg_num) + write_MASTER_CTL(iface, + read_MASTER_CTL(iface) | RSTART); SSYNC(); /* Clear status */ - bfin_write_TWI_INT_STAT(XMTSERV); + write_INT_STAT(iface, XMTSERV); SSYNC(); } if (twi_int_status & RCVSERV) { if (iface->readNum > 0) { /* Receive next data */ - *(iface->transPtr) = bfin_read_TWI_RCV_DATA8(); + *(iface->transPtr) = read_RCV_DATA8(iface); if (iface->cur_mode == TWI_I2C_MODE_COMBINED) { /* Change combine mode into sub mode after * read first data. @@ -105,28 +128,33 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface) iface->transPtr++; iface->readNum--; } else if (iface->manual_stop) { - bfin_write_TWI_MASTER_CTL(bfin_read_TWI_MASTER_CTL() - | STOP); + write_MASTER_CTL(iface, + read_MASTER_CTL(iface) | STOP); + SSYNC(); + } else if (iface->cur_mode == TWI_I2C_MODE_REPEAT && + iface->cur_msg+1 < iface->msg_num) { + write_MASTER_CTL(iface, + read_MASTER_CTL(iface) | RSTART); SSYNC(); } /* Clear interrupt source */ - bfin_write_TWI_INT_STAT(RCVSERV); + write_INT_STAT(iface, RCVSERV); SSYNC(); } if (twi_int_status & MERR) { - bfin_write_TWI_INT_STAT(MERR); - bfin_write_TWI_INT_MASK(0); - bfin_write_TWI_MASTER_STAT(0x3e); - bfin_write_TWI_MASTER_CTL(0); + write_INT_STAT(iface, MERR); + write_INT_MASK(iface, 0); + write_MASTER_STAT(iface, 0x3e); + write_MASTER_CTL(iface, 0); SSYNC(); - iface->result = -1; + iface->result = -EIO; /* if both err and complete int stats are set, return proper * results. */ if (twi_int_status & MCOMP) { - bfin_write_TWI_INT_STAT(MCOMP); - bfin_write_TWI_INT_MASK(0); - bfin_write_TWI_MASTER_CTL(0); + write_INT_STAT(iface, MCOMP); + write_INT_MASK(iface, 0); + write_MASTER_CTL(iface, 0); SSYNC(); /* If it is a quick transfer, only address bug no data, * not an err, return 1. @@ -143,7 +171,7 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface) return; } if (twi_int_status & MCOMP) { - bfin_write_TWI_INT_STAT(MCOMP); + write_INT_STAT(iface, MCOMP); SSYNC(); if (iface->cur_mode == TWI_I2C_MODE_COMBINED) { if (iface->readNum == 0) { @@ -152,28 +180,63 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface) */ iface->readNum = 1; iface->manual_stop = 1; - bfin_write_TWI_MASTER_CTL( - bfin_read_TWI_MASTER_CTL() - | (0xff << 6)); + write_MASTER_CTL(iface, + read_MASTER_CTL(iface) | (0xff << 6)); } else { /* set the readd number in other * combine mode. */ - bfin_write_TWI_MASTER_CTL( - (bfin_read_TWI_MASTER_CTL() & + write_MASTER_CTL(iface, + (read_MASTER_CTL(iface) & (~(0xff << 6))) | - ( iface->readNum << 6)); + (iface->readNum << 6)); + } + /* remove restart bit and enable master receive */ + write_MASTER_CTL(iface, + read_MASTER_CTL(iface) & ~RSTART); + write_MASTER_CTL(iface, + read_MASTER_CTL(iface) | MEN | MDIR); + SSYNC(); + } else if (iface->cur_mode == TWI_I2C_MODE_REPEAT && + iface->cur_msg+1 < iface->msg_num) { + iface->cur_msg++; + iface->transPtr = iface->pmsg[iface->cur_msg].buf; + iface->writeNum = iface->readNum = + iface->pmsg[iface->cur_msg].len; + /* Set Transmit device address */ + write_MASTER_ADDR(iface, + iface->pmsg[iface->cur_msg].addr); + if (iface->pmsg[iface->cur_msg].flags & I2C_M_RD) + iface->read_write = I2C_SMBUS_READ; + else { + iface->read_write = I2C_SMBUS_WRITE; + /* Transmit first data */ + if (iface->writeNum > 0) { + write_XMT_DATA8(iface, + *(iface->transPtr++)); + iface->writeNum--; + SSYNC(); + } + } + + if (iface->pmsg[iface->cur_msg].len <= 255) + write_MASTER_CTL(iface, + iface->pmsg[iface->cur_msg].len << 6); + else { + write_MASTER_CTL(iface, 0xff << 6); + iface->manual_stop = 1; } /* remove restart bit and enable master receive */ - bfin_write_TWI_MASTER_CTL(bfin_read_TWI_MASTER_CTL() & - ~RSTART); - bfin_write_TWI_MASTER_CTL(bfin_read_TWI_MASTER_CTL() | - MEN | MDIR); + write_MASTER_CTL(iface, + read_MASTER_CTL(iface) & ~RSTART); + write_MASTER_CTL(iface, read_MASTER_CTL(iface) | + MEN | ((iface->read_write == I2C_SMBUS_READ) ? + MDIR : 0)); SSYNC(); } else { iface->result = 1; - bfin_write_TWI_INT_MASK(0); - bfin_write_TWI_MASTER_CTL(0); + write_INT_MASK(iface, 0); + write_MASTER_CTL(iface, 0); SSYNC(); complete(&iface->complete); } @@ -221,91 +284,85 @@ static int bfin_twi_master_xfer(struct i2c_adapter *adap, { struct bfin_twi_iface *iface = adap->algo_data; struct i2c_msg *pmsg; - int i, ret; int rc = 0; - if (!(bfin_read_TWI_CONTROL() & TWI_ENA)) + if (!(read_CONTROL(iface) & TWI_ENA)) return -ENXIO; - while (bfin_read_TWI_MASTER_STAT() & BUSBUSY) { + while (read_MASTER_STAT(iface) & BUSBUSY) yield(); + + iface->pmsg = msgs; + iface->msg_num = num; + iface->cur_msg = 0; + + pmsg = &msgs[0]; + if (pmsg->flags & I2C_M_TEN) { + dev_err(&adap->dev, "10 bits addr not supported!\n"); + return -EINVAL; } - ret = 0; - for (i = 0; rc >= 0 && i < num; i++) { - pmsg = &msgs[i]; - if (pmsg->flags & I2C_M_TEN) { - dev_err(&(adap->dev), "i2c-bfin-twi: 10 bits addr " - "not supported !\n"); - rc = -EINVAL; - break; - } + iface->cur_mode = TWI_I2C_MODE_REPEAT; + iface->manual_stop = 0; + iface->transPtr = pmsg->buf; + iface->writeNum = iface->readNum = pmsg->len; + iface->result = 0; + iface->timeout_count = 10; + init_completion(&(iface->complete)); + /* Set Transmit device address */ + write_MASTER_ADDR(iface, pmsg->addr); - iface->cur_mode = TWI_I2C_MODE_STANDARD; - iface->manual_stop = 0; - iface->transPtr = pmsg->buf; - iface->writeNum = iface->readNum = pmsg->len; - iface->result = 0; - iface->timeout_count = 10; - /* Set Transmit device address */ - bfin_write_TWI_MASTER_ADDR(pmsg->addr); - - /* FIFO Initiation. Data in FIFO should be - * discarded before start a new operation. - */ - bfin_write_TWI_FIFO_CTL(0x3); - SSYNC(); - bfin_write_TWI_FIFO_CTL(0); - SSYNC(); + /* FIFO Initiation. Data in FIFO should be + * discarded before start a new operation. + */ + write_FIFO_CTL(iface, 0x3); + SSYNC(); + write_FIFO_CTL(iface, 0); + SSYNC(); - if (pmsg->flags & I2C_M_RD) - iface->read_write = I2C_SMBUS_READ; - else { - iface->read_write = I2C_SMBUS_WRITE; - /* Transmit first data */ - if (iface->writeNum > 0) { - bfin_write_TWI_XMT_DATA8(*(iface->transPtr++)); - iface->writeNum--; - SSYNC(); - } + if (pmsg->flags & I2C_M_RD) + iface->read_write = I2C_SMBUS_READ; + else { + iface->read_write = I2C_SMBUS_WRITE; + /* Transmit first data */ + if (iface->writeNum > 0) { + write_XMT_DATA8(iface, *(iface->transPtr++)); + iface->writeNum--; + SSYNC(); } + } - /* clear int stat */ - bfin_write_TWI_INT_STAT(MERR|MCOMP|XMTSERV|RCVSERV); + /* clear int stat */ + write_INT_STAT(iface, MERR | MCOMP | XMTSERV | RCVSERV); - /* Interrupt mask . Enable XMT, RCV interrupt */ - bfin_write_TWI_INT_MASK(MCOMP | MERR | - ((iface->read_write == I2C_SMBUS_READ)? - RCVSERV : XMTSERV)); - SSYNC(); + /* Interrupt mask . Enable XMT, RCV interrupt */ + write_INT_MASK(iface, MCOMP | MERR | RCVSERV | XMTSERV); + SSYNC(); - if (pmsg->len > 0 && pmsg->len <= 255) - bfin_write_TWI_MASTER_CTL(pmsg->len << 6); - else if (pmsg->len > 255) { - bfin_write_TWI_MASTER_CTL(0xff << 6); - iface->manual_stop = 1; - } else - break; + if (pmsg->len <= 255) + write_MASTER_CTL(iface, pmsg->len << 6); + else { + write_MASTER_CTL(iface, 0xff << 6); + iface->manual_stop = 1; + } - iface->timeout_timer.expires = jiffies + POLL_TIMEOUT; - add_timer(&iface->timeout_timer); + iface->timeout_timer.expires = jiffies + POLL_TIMEOUT; + add_timer(&iface->timeout_timer); - /* Master enable */ - bfin_write_TWI_MASTER_CTL(bfin_read_TWI_MASTER_CTL() | MEN | - ((iface->read_write == I2C_SMBUS_READ) ? MDIR : 0) | - ((CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ>100) ? FAST : 0)); - SSYNC(); + /* Master enable */ + write_MASTER_CTL(iface, read_MASTER_CTL(iface) | MEN | + ((iface->read_write == I2C_SMBUS_READ) ? MDIR : 0) | + ((CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ > 100) ? FAST : 0)); + SSYNC(); - wait_for_completion(&iface->complete); + wait_for_completion(&iface->complete); - rc = iface->result; - if (rc == 1) - ret++; - else if (rc == -1) - break; - } + rc = iface->result; - return ret; + if (rc == 1) + return num; + else + return rc; } /* @@ -319,12 +376,11 @@ int bfin_twi_smbus_xfer(struct i2c_adapter *adap, u16 addr, struct bfin_twi_iface *iface = adap->algo_data; int rc = 0; - if (!(bfin_read_TWI_CONTROL() & TWI_ENA)) + if (!(read_CONTROL(iface) & TWI_ENA)) return -ENXIO; - while (bfin_read_TWI_MASTER_STAT() & BUSBUSY) { + while (read_MASTER_STAT(iface) & BUSBUSY) yield(); - } iface->writeNum = 0; iface->readNum = 0; @@ -392,19 +448,20 @@ int bfin_twi_smbus_xfer(struct i2c_adapter *adap, u16 addr, iface->read_write = read_write; iface->command = command; iface->timeout_count = 10; + init_completion(&(iface->complete)); /* FIFO Initiation. Data in FIFO should be discarded before * start a new operation. */ - bfin_write_TWI_FIFO_CTL(0x3); + write_FIFO_CTL(iface, 0x3); SSYNC(); - bfin_write_TWI_FIFO_CTL(0); + write_FIFO_CTL(iface, 0); /* clear int stat */ - bfin_write_TWI_INT_STAT(MERR|MCOMP|XMTSERV|RCVSERV); + write_INT_STAT(iface, MERR | MCOMP | XMTSERV | RCVSERV); /* Set Transmit device address */ - bfin_write_TWI_MASTER_ADDR(addr); + write_MASTER_ADDR(iface, addr); SSYNC(); iface->timeout_timer.expires = jiffies + POLL_TIMEOUT; @@ -412,60 +469,64 @@ int bfin_twi_smbus_xfer(struct i2c_adapter *adap, u16 addr, switch (iface->cur_mode) { case TWI_I2C_MODE_STANDARDSUB: - bfin_write_TWI_XMT_DATA8(iface->command); - bfin_write_TWI_INT_MASK(MCOMP | MERR | + write_XMT_DATA8(iface, iface->command); + write_INT_MASK(iface, MCOMP | MERR | ((iface->read_write == I2C_SMBUS_READ) ? RCVSERV : XMTSERV)); SSYNC(); if (iface->writeNum + 1 <= 255) - bfin_write_TWI_MASTER_CTL((iface->writeNum + 1) << 6); + write_MASTER_CTL(iface, (iface->writeNum + 1) << 6); else { - bfin_write_TWI_MASTER_CTL(0xff << 6); + write_MASTER_CTL(iface, 0xff << 6); iface->manual_stop = 1; } /* Master enable */ - bfin_write_TWI_MASTER_CTL(bfin_read_TWI_MASTER_CTL() | MEN | + write_MASTER_CTL(iface, read_MASTER_CTL(iface) | MEN | ((CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ>100) ? FAST : 0)); break; case TWI_I2C_MODE_COMBINED: - bfin_write_TWI_XMT_DATA8(iface->command); - bfin_write_TWI_INT_MASK(MCOMP | MERR | RCVSERV | XMTSERV); + write_XMT_DATA8(iface, iface->command); + write_INT_MASK(iface, MCOMP | MERR | RCVSERV | XMTSERV); SSYNC(); if (iface->writeNum > 0) - bfin_write_TWI_MASTER_CTL((iface->writeNum + 1) << 6); + write_MASTER_CTL(iface, (iface->writeNum + 1) << 6); else - bfin_write_TWI_MASTER_CTL(0x1 << 6); + write_MASTER_CTL(iface, 0x1 << 6); /* Master enable */ - bfin_write_TWI_MASTER_CTL(bfin_read_TWI_MASTER_CTL() | MEN | + write_MASTER_CTL(iface, read_MASTER_CTL(iface) | MEN | ((CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ>100) ? FAST : 0)); break; default: - bfin_write_TWI_MASTER_CTL(0); + write_MASTER_CTL(iface, 0); if (size != I2C_SMBUS_QUICK) { /* Don't access xmit data register when this is a * read operation. */ if (iface->read_write != I2C_SMBUS_READ) { if (iface->writeNum > 0) { - bfin_write_TWI_XMT_DATA8(*(iface->transPtr++)); + write_XMT_DATA8(iface, + *(iface->transPtr++)); if (iface->writeNum <= 255) - bfin_write_TWI_MASTER_CTL(iface->writeNum << 6); + write_MASTER_CTL(iface, + iface->writeNum << 6); else { - bfin_write_TWI_MASTER_CTL(0xff << 6); + write_MASTER_CTL(iface, + 0xff << 6); iface->manual_stop = 1; } iface->writeNum--; } else { - bfin_write_TWI_XMT_DATA8(iface->command); - bfin_write_TWI_MASTER_CTL(1 << 6); + write_XMT_DATA8(iface, iface->command); + write_MASTER_CTL(iface, 1 << 6); } } else { if (iface->readNum > 0 && iface->readNum <= 255) - bfin_write_TWI_MASTER_CTL(iface->readNum << 6); + write_MASTER_CTL(iface, + iface->readNum << 6); else if (iface->readNum > 255) { - bfin_write_TWI_MASTER_CTL(0xff << 6); + write_MASTER_CTL(iface, 0xff << 6); iface->manual_stop = 1; } else { del_timer(&iface->timeout_timer); @@ -473,13 +534,13 @@ int bfin_twi_smbus_xfer(struct i2c_adapter *adap, u16 addr, } } } - bfin_write_TWI_INT_MASK(MCOMP | MERR | + write_INT_MASK(iface, MCOMP | MERR | ((iface->read_write == I2C_SMBUS_READ) ? RCVSERV : XMTSERV)); SSYNC(); /* Master enable */ - bfin_write_TWI_MASTER_CTL(bfin_read_TWI_MASTER_CTL() | MEN | + write_MASTER_CTL(iface, read_MASTER_CTL(iface) | MEN | ((iface->read_write == I2C_SMBUS_READ) ? MDIR : 0) | ((CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ > 100) ? FAST : 0)); break; @@ -514,10 +575,10 @@ static struct i2c_algorithm bfin_twi_algorithm = { static int i2c_bfin_twi_suspend(struct platform_device *dev, pm_message_t state) { -/* struct bfin_twi_iface *iface = platform_get_drvdata(dev);*/ + struct bfin_twi_iface *iface = platform_get_drvdata(dev); /* Disable TWI */ - bfin_write_TWI_CONTROL(bfin_read_TWI_CONTROL() & ~TWI_ENA); + write_CONTROL(iface, read_CONTROL(iface) & ~TWI_ENA); SSYNC(); return 0; @@ -525,24 +586,52 @@ static int i2c_bfin_twi_suspend(struct platform_device *dev, pm_message_t state) static int i2c_bfin_twi_resume(struct platform_device *dev) { -/* struct bfin_twi_iface *iface = platform_get_drvdata(dev);*/ + struct bfin_twi_iface *iface = platform_get_drvdata(dev); /* Enable TWI */ - bfin_write_TWI_CONTROL(bfin_read_TWI_CONTROL() | TWI_ENA); + write_CONTROL(iface, read_CONTROL(iface) | TWI_ENA); SSYNC(); return 0; } -static int i2c_bfin_twi_probe(struct platform_device *dev) +static int i2c_bfin_twi_probe(struct platform_device *pdev) { - struct bfin_twi_iface *iface = &twi_iface; + struct bfin_twi_iface *iface; struct i2c_adapter *p_adap; + struct resource *res; int rc; + iface = kzalloc(sizeof(struct bfin_twi_iface), GFP_KERNEL); + if (!iface) { + dev_err(&pdev->dev, "Cannot allocate memory\n"); + rc = -ENOMEM; + goto out_error_nomem; + } + spin_lock_init(&(iface->lock)); - init_completion(&(iface->complete)); - iface->irq = IRQ_TWI; + + /* Find and map our resources */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res == NULL) { + dev_err(&pdev->dev, "Cannot get IORESOURCE_MEM\n"); + rc = -ENOENT; + goto out_error_get_res; + } + + iface->regs_base = ioremap(res->start, res->end - res->start + 1); + if (iface->regs_base == NULL) { + dev_err(&pdev->dev, "Cannot map IO\n"); + rc = -ENXIO; + goto out_error_ioremap; + } + + iface->irq = platform_get_irq(pdev, 0); + if (iface->irq < 0) { + dev_err(&pdev->dev, "No IRQ specified\n"); + rc = -ENOENT; + goto out_error_no_irq; + } init_timer(&(iface->timeout_timer)); iface->timeout_timer.function = bfin_twi_timeout; @@ -550,39 +639,63 @@ static int i2c_bfin_twi_probe(struct platform_device *dev) p_adap = &iface->adap; p_adap->id = I2C_HW_BLACKFIN; - p_adap->nr = dev->id; - strlcpy(p_adap->name, dev->name, sizeof(p_adap->name)); + p_adap->nr = pdev->id; + strlcpy(p_adap->name, pdev->name, sizeof(p_adap->name)); p_adap->algo = &bfin_twi_algorithm; p_adap->algo_data = iface; p_adap->class = I2C_CLASS_ALL; - p_adap->dev.parent = &dev->dev; + p_adap->dev.parent = &pdev->dev; + + rc = peripheral_request_list(pin_req[pdev->id], "i2c-bfin-twi"); + if (rc) { + dev_err(&pdev->dev, "Can't setup pin mux!\n"); + goto out_error_pin_mux; + } rc = request_irq(iface->irq, bfin_twi_interrupt_entry, - IRQF_DISABLED, dev->name, iface); + IRQF_DISABLED, pdev->name, iface); if (rc) { - dev_err(&(p_adap->dev), "i2c-bfin-twi: can't get IRQ %d !\n", - iface->irq); - return -ENODEV; + dev_err(&pdev->dev, "Can't get IRQ %d !\n", iface->irq); + rc = -ENODEV; + goto out_error_req_irq; } /* Set TWI internal clock as 10MHz */ - bfin_write_TWI_CONTROL(((get_sclk() / 1024 / 1024 + 5) / 10) & 0x7F); + write_CONTROL(iface, ((get_sclk() / 1024 / 1024 + 5) / 10) & 0x7F); /* Set Twi interface clock as specified */ - bfin_write_TWI_CLKDIV((( 5*1024 / CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ ) - << 8) | (( 5*1024 / CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ ) + write_CLKDIV(iface, ((5*1024 / CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ) + << 8) | ((5*1024 / CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ) & 0xFF)); /* Enable TWI */ - bfin_write_TWI_CONTROL(bfin_read_TWI_CONTROL() | TWI_ENA); + write_CONTROL(iface, read_CONTROL(iface) | TWI_ENA); SSYNC(); rc = i2c_add_numbered_adapter(p_adap); - if (rc < 0) - free_irq(iface->irq, iface); - else - platform_set_drvdata(dev, iface); + if (rc < 0) { + dev_err(&pdev->dev, "Can't add i2c adapter!\n"); + goto out_error_add_adapter; + } + + platform_set_drvdata(pdev, iface); + dev_info(&pdev->dev, "Blackfin BF5xx on-chip I2C TWI Contoller, " + "regs_base@%p\n", iface->regs_base); + + return 0; + +out_error_add_adapter: + free_irq(iface->irq, iface); +out_error_req_irq: +out_error_no_irq: + peripheral_free_list(pin_req[pdev->id]); +out_error_pin_mux: + iounmap(iface->regs_base); +out_error_ioremap: +out_error_get_res: + kfree(iface); +out_error_nomem: return rc; } @@ -594,6 +707,9 @@ static int i2c_bfin_twi_remove(struct platform_device *pdev) i2c_del_adapter(&(iface->adap)); free_irq(iface->irq, iface); + peripheral_free_list(pin_req[pdev->id]); + iounmap(iface->regs_base); + kfree(iface); return 0; } @@ -611,8 +727,6 @@ static struct platform_driver i2c_bfin_twi_driver = { static int __init i2c_bfin_twi_init(void) { - pr_info("I2C: Blackfin I2C TWI driver\n"); - return platform_driver_register(&i2c_bfin_twi_driver); } @@ -621,9 +735,10 @@ static void __exit i2c_bfin_twi_exit(void) platform_driver_unregister(&i2c_bfin_twi_driver); } -MODULE_AUTHOR("Sonic Zhang <sonic.zhang@analog.com>"); -MODULE_DESCRIPTION("I2C-Bus adapter routines for Blackfin TWI"); -MODULE_LICENSE("GPL"); - module_init(i2c_bfin_twi_init); module_exit(i2c_bfin_twi_exit); + +MODULE_AUTHOR("Bryan Wu, Sonic Zhang"); +MODULE_DESCRIPTION("Blackfin BF5xx on-chip I2C TWI Contoller Driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:i2c-bfin-twi"); diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c index fde26345a37..7ecbfc429b1 100644 --- a/drivers/i2c/busses/i2c-davinci.c +++ b/drivers/i2c/busses/i2c-davinci.c @@ -328,7 +328,7 @@ i2c_davinci_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) int i; int ret; - dev_dbg(dev->dev, "%s: msgs: %d\n", __FUNCTION__, num); + dev_dbg(dev->dev, "%s: msgs: %d\n", __func__, num); ret = i2c_davinci_wait_bus_not_busy(dev, 1); if (ret < 0) { @@ -342,7 +342,7 @@ i2c_davinci_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) return ret; } - dev_dbg(dev->dev, "%s:%d ret: %d\n", __FUNCTION__, __LINE__, ret); + dev_dbg(dev->dev, "%s:%d ret: %d\n", __func__, __LINE__, ret); return num; } @@ -364,7 +364,7 @@ static irqreturn_t i2c_davinci_isr(int this_irq, void *dev_id) u16 w; while ((stat = davinci_i2c_read_reg(dev, DAVINCI_I2C_IVR_REG))) { - dev_dbg(dev->dev, "%s: stat=0x%x\n", __FUNCTION__, stat); + dev_dbg(dev->dev, "%s: stat=0x%x\n", __func__, stat); if (count++ == 100) { dev_warn(dev->dev, "Too much work in one IRQ\n"); break; @@ -553,6 +553,9 @@ static int davinci_i2c_remove(struct platform_device *pdev) return 0; } +/* work with hotplug and coldplug */ +MODULE_ALIAS("platform:i2c_davinci"); + static struct platform_driver davinci_i2c_driver = { .probe = davinci_i2c_probe, .remove = davinci_i2c_remove, diff --git a/drivers/i2c/busses/i2c-gpio.c b/drivers/i2c/busses/i2c-gpio.c index 3ca19fc234f..7c1b762aa68 100644 --- a/drivers/i2c/busses/i2c-gpio.c +++ b/drivers/i2c/busses/i2c-gpio.c @@ -220,3 +220,4 @@ module_exit(i2c_gpio_exit); MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>"); MODULE_DESCRIPTION("Platform-independent bitbanging I2C driver"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:i2c-gpio"); diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c index 22bb247d0e6..85dbf34382e 100644 --- a/drivers/i2c/busses/i2c-ibm_iic.c +++ b/drivers/i2c/busses/i2c-ibm_iic.c @@ -6,6 +6,9 @@ * Copyright (c) 2003, 2004 Zultys Technologies. * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> * + * Copyright (c) 2008 PIKA Technologies + * Sean MacLennan <smaclennan@pikatech.com> + * * Based on original work by * Ian DaSilva <idasilva@mvista.com> * Armin Kuster <akuster@mvista.com> @@ -39,12 +42,17 @@ #include <asm/io.h> #include <linux/i2c.h> #include <linux/i2c-id.h> + +#ifdef CONFIG_IBM_OCP #include <asm/ocp.h> #include <asm/ibm4xx.h> +#else +#include <linux/of_platform.h> +#endif #include "i2c-ibm_iic.h" -#define DRIVER_VERSION "2.1" +#define DRIVER_VERSION "2.2" MODULE_DESCRIPTION("IBM IIC driver v" DRIVER_VERSION); MODULE_LICENSE("GPL"); @@ -650,13 +658,14 @@ static inline u8 iic_clckdiv(unsigned int opb) opb /= 1000000; if (opb < 20 || opb > 150){ - printk(KERN_CRIT "ibm-iic: invalid OPB clock frequency %u MHz\n", + printk(KERN_WARNING "ibm-iic: invalid OPB clock frequency %u MHz\n", opb); opb = opb < 20 ? 20 : 150; } return (u8)((opb + 9) / 10 - 1); } +#ifdef CONFIG_IBM_OCP /* * Register single IIC interface */ @@ -672,7 +681,7 @@ static int __devinit iic_probe(struct ocp_device *ocp){ ocp->def->index); if (!(dev = kzalloc(sizeof(*dev), GFP_KERNEL))) { - printk(KERN_CRIT "ibm-iic%d: failed to allocate device data\n", + printk(KERN_ERR "ibm-iic%d: failed to allocate device data\n", ocp->def->index); return -ENOMEM; } @@ -687,7 +696,7 @@ static int __devinit iic_probe(struct ocp_device *ocp){ } if (!(dev->vaddr = ioremap(ocp->def->paddr, sizeof(struct iic_regs)))){ - printk(KERN_CRIT "ibm-iic%d: failed to ioremap device registers\n", + printk(KERN_ERR "ibm-iic%d: failed to ioremap device registers\n", dev->idx); ret = -ENXIO; goto fail2; @@ -745,7 +754,7 @@ static int __devinit iic_probe(struct ocp_device *ocp){ adap->nr = dev->idx >= 0 ? dev->idx : 0; if ((ret = i2c_add_numbered_adapter(adap)) < 0) { - printk(KERN_CRIT "ibm-iic%d: failed to register i2c adapter\n", + printk(KERN_ERR "ibm-iic%d: failed to register i2c adapter\n", dev->idx); goto fail; } @@ -778,7 +787,7 @@ static void __devexit iic_remove(struct ocp_device *ocp) struct ibm_iic_private* dev = (struct ibm_iic_private*)ocp_get_drvdata(ocp); BUG_ON(dev == NULL); if (i2c_del_adapter(&dev->adap)){ - printk(KERN_CRIT "ibm-iic%d: failed to delete i2c adapter :(\n", + printk(KERN_ERR "ibm-iic%d: failed to delete i2c adapter :(\n", dev->idx); /* That's *very* bad, just shutdown IRQ ... */ if (dev->irq >= 0){ @@ -828,5 +837,181 @@ static void __exit iic_exit(void) ocp_unregister_driver(&ibm_iic_driver); } +#else /* !CONFIG_IBM_OCP */ + +static int __devinit iic_request_irq(struct of_device *ofdev, + struct ibm_iic_private *dev) +{ + struct device_node *np = ofdev->node; + int irq; + + if (iic_force_poll) + return NO_IRQ; + + irq = irq_of_parse_and_map(np, 0); + if (irq == NO_IRQ) { + dev_err(&ofdev->dev, "irq_of_parse_and_map failed\n"); + return NO_IRQ; + } + + /* Disable interrupts until we finish initialization, assumes + * level-sensitive IRQ setup... + */ + iic_interrupt_mode(dev, 0); + if (request_irq(irq, iic_handler, 0, "IBM IIC", dev)) { + dev_err(&ofdev->dev, "request_irq %d failed\n", irq); + /* Fallback to the polling mode */ + return NO_IRQ; + } + + return irq; +} + +/* + * Register single IIC interface + */ +static int __devinit iic_probe(struct of_device *ofdev, + const struct of_device_id *match) +{ + struct device_node *np = ofdev->node; + struct ibm_iic_private *dev; + struct i2c_adapter *adap; + const u32 *indexp, *freq; + int ret; + + dev = kzalloc(sizeof(*dev), GFP_KERNEL); + if (!dev) { + dev_err(&ofdev->dev, "failed to allocate device data\n"); + return -ENOMEM; + } + + dev_set_drvdata(&ofdev->dev, dev); + + indexp = of_get_property(np, "index", NULL); + if (!indexp) { + dev_err(&ofdev->dev, "no index specified\n"); + ret = -EINVAL; + goto error_cleanup; + } + dev->idx = *indexp; + + dev->vaddr = of_iomap(np, 0); + if (dev->vaddr == NULL) { + dev_err(&ofdev->dev, "failed to iomap device\n"); + ret = -ENXIO; + goto error_cleanup; + } + + init_waitqueue_head(&dev->wq); + + dev->irq = iic_request_irq(ofdev, dev); + if (dev->irq == NO_IRQ) + dev_warn(&ofdev->dev, "using polling mode\n"); + + /* Board specific settings */ + if (iic_force_fast || of_get_property(np, "fast-mode", NULL)) + dev->fast_mode = 1; + + freq = of_get_property(np, "clock-frequency", NULL); + if (freq == NULL) { + freq = of_get_property(np->parent, "clock-frequency", NULL); + if (freq == NULL) { + dev_err(&ofdev->dev, "Unable to get bus frequency\n"); + ret = -EINVAL; + goto error_cleanup; + } + } + + dev->clckdiv = iic_clckdiv(*freq); + dev_dbg(&ofdev->dev, "clckdiv = %d\n", dev->clckdiv); + + /* Initialize IIC interface */ + iic_dev_init(dev); + + /* Register it with i2c layer */ + adap = &dev->adap; + adap->dev.parent = &ofdev->dev; + strlcpy(adap->name, "IBM IIC", sizeof(adap->name)); + i2c_set_adapdata(adap, dev); + adap->id = I2C_HW_OCP; + adap->class = I2C_CLASS_HWMON; + adap->algo = &iic_algo; + adap->timeout = 1; + adap->nr = dev->idx; + + ret = i2c_add_numbered_adapter(adap); + if (ret < 0) { + dev_err(&ofdev->dev, "failed to register i2c adapter\n"); + goto error_cleanup; + } + + dev_info(&ofdev->dev, "using %s mode\n", + dev->fast_mode ? "fast (400 kHz)" : "standard (100 kHz)"); + + return 0; + +error_cleanup: + if (dev->irq != NO_IRQ) { + iic_interrupt_mode(dev, 0); + free_irq(dev->irq, dev); + } + + if (dev->vaddr) + iounmap(dev->vaddr); + + dev_set_drvdata(&ofdev->dev, NULL); + kfree(dev); + return ret; +} + +/* + * Cleanup initialized IIC interface + */ +static int __devexit iic_remove(struct of_device *ofdev) +{ + struct ibm_iic_private *dev = dev_get_drvdata(&ofdev->dev); + + dev_set_drvdata(&ofdev->dev, NULL); + + i2c_del_adapter(&dev->adap); + + if (dev->irq != NO_IRQ) { + iic_interrupt_mode(dev, 0); + free_irq(dev->irq, dev); + } + + iounmap(dev->vaddr); + kfree(dev); + + return 0; +} + +static const struct of_device_id ibm_iic_match[] = { + { .compatible = "ibm,iic-405ex", }, + { .compatible = "ibm,iic-405gp", }, + { .compatible = "ibm,iic-440gp", }, + { .compatible = "ibm,iic-440gpx", }, + { .compatible = "ibm,iic-440grx", }, + {} +}; + +static struct of_platform_driver ibm_iic_driver = { + .name = "ibm-iic", + .match_table = ibm_iic_match, + .probe = iic_probe, + .remove = __devexit_p(iic_remove), +}; + +static int __init iic_init(void) +{ + return of_register_platform_driver(&ibm_iic_driver); +} + +static void __exit iic_exit(void) +{ + of_unregister_platform_driver(&ibm_iic_driver); +} +#endif /* CONFIG_IBM_OCP */ + module_init(iic_init); module_exit(iic_exit); diff --git a/drivers/i2c/busses/i2c-iop3xx.c b/drivers/i2c/busses/i2c-iop3xx.c index ab41400c883..39884e79759 100644 --- a/drivers/i2c/busses/i2c-iop3xx.c +++ b/drivers/i2c/busses/i2c-iop3xx.c @@ -550,3 +550,4 @@ module_exit (i2c_iop3xx_exit); MODULE_AUTHOR("D-TACQ Solutions Ltd <www.d-tacq.com>"); MODULE_DESCRIPTION("IOP3xx iic algorithm and driver"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:IOP3xx-I2C"); diff --git a/drivers/i2c/busses/i2c-ixp2000.c b/drivers/i2c/busses/i2c-ixp2000.c index 6352121a282..5af9e6521e6 100644 --- a/drivers/i2c/busses/i2c-ixp2000.c +++ b/drivers/i2c/busses/i2c-ixp2000.c @@ -164,4 +164,5 @@ module_exit(ixp2000_i2c_exit); MODULE_AUTHOR ("Deepak Saxena <dsaxena@plexity.net>"); MODULE_DESCRIPTION("IXP2000 GPIO-based I2C bus driver"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:IXP2000-I2C"); diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c index bbe787b243b..18beb0ad7bf 100644 --- a/drivers/i2c/busses/i2c-mpc.c +++ b/drivers/i2c/busses/i2c-mpc.c @@ -392,6 +392,9 @@ static int fsl_i2c_remove(struct platform_device *pdev) return 0; }; +/* work with hotplug and coldplug */ +MODULE_ALIAS("platform:fsl-i2c"); + /* Structure for a device driver */ static struct platform_driver fsl_i2c_driver = { .probe = fsl_i2c_probe, diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c index e417c2c3ca2..f145692cbb7 100644 --- a/drivers/i2c/busses/i2c-ocores.c +++ b/drivers/i2c/busses/i2c-ocores.c @@ -312,6 +312,9 @@ static int __devexit ocores_i2c_remove(struct platform_device* pdev) return 0; } +/* work with hotplug and coldplug */ +MODULE_ALIAS("platform:ocores-i2c"); + static struct platform_driver ocores_i2c_driver = { .probe = ocores_i2c_probe, .remove = __devexit_p(ocores_i2c_remove), diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index 7ba31770d77..e7eb7bf9dde 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -693,3 +693,4 @@ module_exit(omap_i2c_exit_driver); MODULE_AUTHOR("MontaVista Software, Inc. (and others)"); MODULE_DESCRIPTION("TI OMAP I2C bus adapter"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:i2c_omap"); diff --git a/drivers/i2c/busses/i2c-pca-isa.c b/drivers/i2c/busses/i2c-pca-isa.c index 496ee875eb4..a119784bae1 100644 --- a/drivers/i2c/busses/i2c-pca-isa.c +++ b/drivers/i2c/busses/i2c-pca-isa.c @@ -1,6 +1,7 @@ /* * i2c-pca-isa.c driver for PCA9564 on ISA boards * Copyright (C) 2004 Arcom Control Systems + * Copyright (C) 2008 Pengutronix * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -22,11 +23,9 @@ #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/delay.h> -#include <linux/slab.h> #include <linux/init.h> #include <linux/interrupt.h> #include <linux/wait.h> - #include <linux/isa.h> #include <linux/i2c.h> #include <linux/i2c-algo-pca.h> @@ -34,13 +33,9 @@ #include <asm/io.h> #include <asm/irq.h> -#include "../algos/i2c-algo-pca.h" - +#define DRIVER "i2c-pca-isa" #define IO_SIZE 4 -#undef DEBUG_IO -//#define DEBUG_IO - static unsigned long base = 0x330; static int irq = 10; @@ -48,22 +43,9 @@ static int irq = 10; * in the actual clock rate */ static int clock = I2C_PCA_CON_59kHz; -static int own = 0x55; - static wait_queue_head_t pca_wait; -static int pca_isa_getown(struct i2c_algo_pca_data *adap) -{ - return (own); -} - -static int pca_isa_getclock(struct i2c_algo_pca_data *adap) -{ - return (clock); -} - -static void -pca_isa_writebyte(struct i2c_algo_pca_data *adap, int reg, int val) +static void pca_isa_writebyte(void *pd, int reg, int val) { #ifdef DEBUG_IO static char *names[] = { "T/O", "DAT", "ADR", "CON" }; @@ -72,44 +54,49 @@ pca_isa_writebyte(struct i2c_algo_pca_data *adap, int reg, int val) outb(val, base+reg); } -static int -pca_isa_readbyte(struct i2c_algo_pca_data *adap, int reg) +static int pca_isa_readbyte(void *pd, int reg) { int res = inb(base+reg); #ifdef DEBUG_IO { - static char *names[] = { "STA", "DAT", "ADR", "CON" }; + static char *names[] = { "STA", "DAT", "ADR", "CON" }; printk("*** read %s => %#04x\n", names[reg], res); } #endif return res; } -static int pca_isa_waitforinterrupt(struct i2c_algo_pca_data *adap) +static int pca_isa_waitforcompletion(void *pd) { int ret = 0; if (irq > -1) { ret = wait_event_interruptible(pca_wait, - pca_isa_readbyte(adap, I2C_PCA_CON) & I2C_PCA_CON_SI); + pca_isa_readbyte(pd, I2C_PCA_CON) & I2C_PCA_CON_SI); } else { - while ((pca_isa_readbyte(adap, I2C_PCA_CON) & I2C_PCA_CON_SI) == 0) + while ((pca_isa_readbyte(pd, I2C_PCA_CON) & I2C_PCA_CON_SI) == 0) udelay(100); } return ret; } +static void pca_isa_resetchip(void *pd) +{ + /* apparently only an external reset will do it. not a lot can be done */ + printk(KERN_WARNING DRIVER ": Haven't figured out how to do a reset yet\n"); +} + static irqreturn_t pca_handler(int this_irq, void *dev_id) { wake_up_interruptible(&pca_wait); return IRQ_HANDLED; } static struct i2c_algo_pca_data pca_isa_data = { - .get_own = pca_isa_getown, - .get_clock = pca_isa_getclock, + /* .data intentionally left NULL, not needed with ISA */ .write_byte = pca_isa_writebyte, .read_byte = pca_isa_readbyte, - .wait_for_interrupt = pca_isa_waitforinterrupt, + .wait_for_completion = pca_isa_waitforcompletion, + .reset_chip = pca_isa_resetchip, }; static struct i2c_adapter pca_isa_ops = { @@ -117,6 +104,7 @@ static struct i2c_adapter pca_isa_ops = { .id = I2C_HW_A_ISA, .algo_data = &pca_isa_data, .name = "PCA9564 ISA Adapter", + .timeout = 100, }; static int __devinit pca_isa_probe(struct device *dev, unsigned int id) @@ -144,6 +132,7 @@ static int __devinit pca_isa_probe(struct device *dev, unsigned int id) } } + pca_isa_data.i2c_clock = clock; if (i2c_pca_add_bus(&pca_isa_ops) < 0) { dev_err(dev, "Failed to add i2c bus\n"); goto out_irq; @@ -178,7 +167,7 @@ static struct isa_driver pca_isa_driver = { .remove = __devexit_p(pca_isa_remove), .driver = { .owner = THIS_MODULE, - .name = "i2c-pca-isa", + .name = DRIVER, } }; @@ -204,7 +193,5 @@ MODULE_PARM_DESC(irq, "IRQ"); module_param(clock, int, 0); MODULE_PARM_DESC(clock, "Clock rate as described in table 1 of PCA9564 datasheet"); -module_param(own, int, 0); /* the driver can't do slave mode, so there's no real point in this */ - module_init(pca_isa_init); module_exit(pca_isa_exit); diff --git a/drivers/i2c/busses/i2c-pca-platform.c b/drivers/i2c/busses/i2c-pca-platform.c new file mode 100644 index 00000000000..9d75f51e8f0 --- /dev/null +++ b/drivers/i2c/busses/i2c-pca-platform.c @@ -0,0 +1,298 @@ +/* + * i2c_pca_platform.c + * + * Platform driver for the PCA9564 I2C controller. + * + * Copyright (C) 2008 Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + + */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/i2c-algo-pca.h> +#include <linux/i2c-pca-platform.h> +#include <linux/gpio.h> + +#include <asm/irq.h> +#include <asm/io.h> + +#define res_len(r) ((r)->end - (r)->start + 1) + +struct i2c_pca_pf_data { + void __iomem *reg_base; + int irq; /* if 0, use polling */ + int gpio; + wait_queue_head_t wait; + struct i2c_adapter adap; + struct i2c_algo_pca_data algo_data; + unsigned long io_base; + unsigned long io_size; +}; + +/* Read/Write functions for different register alignments */ + +static int i2c_pca_pf_readbyte8(void *pd, int reg) +{ + struct i2c_pca_pf_data *i2c = pd; + return ioread8(i2c->reg_base + reg); +} + +static int i2c_pca_pf_readbyte16(void *pd, int reg) +{ + struct i2c_pca_pf_data *i2c = pd; + return ioread8(i2c->reg_base + reg * 2); +} + +static int i2c_pca_pf_readbyte32(void *pd, int reg) +{ + struct i2c_pca_pf_data *i2c = pd; + return ioread8(i2c->reg_base + reg * 4); +} + +static void i2c_pca_pf_writebyte8(void *pd, int reg, int val) +{ + struct i2c_pca_pf_data *i2c = pd; + iowrite8(val, i2c->reg_base + reg); +} + +static void i2c_pca_pf_writebyte16(void *pd, int reg, int val) +{ + struct i2c_pca_pf_data *i2c = pd; + iowrite8(val, i2c->reg_base + reg * 2); +} + +static void i2c_pca_pf_writebyte32(void *pd, int reg, int val) +{ + struct i2c_pca_pf_data *i2c = pd; + iowrite8(val, i2c->reg_base + reg * 4); +} + + +static int i2c_pca_pf_waitforcompletion(void *pd) +{ + struct i2c_pca_pf_data *i2c = pd; + int ret = 0; + + if (i2c->irq) { + ret = wait_event_interruptible(i2c->wait, + i2c->algo_data.read_byte(i2c, I2C_PCA_CON) + & I2C_PCA_CON_SI); + } else { + /* + * Do polling... + * XXX: Could get stuck in extreme cases! + * Maybe add timeout, but using irqs is preferred anyhow. + */ + while ((i2c->algo_data.read_byte(i2c, I2C_PCA_CON) + & I2C_PCA_CON_SI) == 0) + udelay(100); + } + + return ret; +} + +static void i2c_pca_pf_dummyreset(void *pd) +{ + struct i2c_pca_pf_data *i2c = pd; + printk(KERN_WARNING "%s: No reset-pin found. Chip may get stuck!\n", + i2c->adap.name); +} + +static void i2c_pca_pf_resetchip(void *pd) +{ + struct i2c_pca_pf_data *i2c = pd; + + gpio_set_value(i2c->gpio, 0); + ndelay(100); + gpio_set_value(i2c->gpio, 1); +} + +static irqreturn_t i2c_pca_pf_handler(int this_irq, void *dev_id) +{ + struct i2c_pca_pf_data *i2c = dev_id; + + if ((i2c->algo_data.read_byte(i2c, I2C_PCA_CON) & I2C_PCA_CON_SI) == 0) + return IRQ_NONE; + + wake_up_interruptible(&i2c->wait); + + return IRQ_HANDLED; +} + + +static int __devinit i2c_pca_pf_probe(struct platform_device *pdev) +{ + struct i2c_pca_pf_data *i2c; + struct resource *res; + struct i2c_pca9564_pf_platform_data *platform_data = + pdev->dev.platform_data; + int ret = 0; + int irq; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + irq = platform_get_irq(pdev, 0); + /* If irq is 0, we do polling. */ + + if (res == NULL) { + ret = -ENODEV; + goto e_print; + } + + if (!request_mem_region(res->start, res_len(res), res->name)) { + ret = -ENOMEM; + goto e_print; + } + + i2c = kzalloc(sizeof(struct i2c_pca_pf_data), GFP_KERNEL); + if (!i2c) { + ret = -ENOMEM; + goto e_alloc; + } + + init_waitqueue_head(&i2c->wait); + + i2c->reg_base = ioremap(res->start, res_len(res)); + if (!i2c->reg_base) { + ret = -EIO; + goto e_remap; + } + i2c->io_base = res->start; + i2c->io_size = res_len(res); + i2c->irq = irq; + + i2c->adap.nr = pdev->id >= 0 ? pdev->id : 0; + i2c->adap.owner = THIS_MODULE; + snprintf(i2c->adap.name, sizeof(i2c->adap.name), "PCA9564 at 0x%08lx", + (unsigned long) res->start); + i2c->adap.algo_data = &i2c->algo_data; + i2c->adap.dev.parent = &pdev->dev; + i2c->adap.timeout = platform_data->timeout; + + i2c->algo_data.i2c_clock = platform_data->i2c_clock_speed; + i2c->algo_data.data = i2c; + + switch (res->flags & IORESOURCE_MEM_TYPE_MASK) { + case IORESOURCE_MEM_32BIT: + i2c->algo_data.write_byte = i2c_pca_pf_writebyte32; + i2c->algo_data.read_byte = i2c_pca_pf_readbyte32; + break; + case IORESOURCE_MEM_16BIT: + i2c->algo_data.write_byte = i2c_pca_pf_writebyte16; + i2c->algo_data.read_byte = i2c_pca_pf_readbyte16; + break; + case IORESOURCE_MEM_8BIT: + default: + i2c->algo_data.write_byte = i2c_pca_pf_writebyte8; + i2c->algo_data.read_byte = i2c_pca_pf_readbyte8; + break; + } + + i2c->algo_data.wait_for_completion = i2c_pca_pf_waitforcompletion; + + i2c->gpio = platform_data->gpio; + i2c->algo_data.reset_chip = i2c_pca_pf_dummyreset; + + /* Use gpio_is_valid() when in mainline */ + if (i2c->gpio > -1) { + ret = gpio_request(i2c->gpio, i2c->adap.name); + if (ret == 0) { + gpio_direction_output(i2c->gpio, 1); + i2c->algo_data.reset_chip = i2c_pca_pf_resetchip; + } else { + printk(KERN_WARNING "%s: Registering gpio failed!\n", + i2c->adap.name); + i2c->gpio = ret; + } + } + + if (irq) { + ret = request_irq(irq, i2c_pca_pf_handler, + IRQF_TRIGGER_FALLING, i2c->adap.name, i2c); + if (ret) + goto e_reqirq; + } + + if (i2c_pca_add_numbered_bus(&i2c->adap) < 0) { + ret = -ENODEV; + goto e_adapt; + } + + platform_set_drvdata(pdev, i2c); + + printk(KERN_INFO "%s registered.\n", i2c->adap.name); + + return 0; + +e_adapt: + if (irq) + free_irq(irq, i2c); +e_reqirq: + if (i2c->gpio > -1) + gpio_free(i2c->gpio); + + iounmap(i2c->reg_base); +e_remap: + kfree(i2c); +e_alloc: + release_mem_region(res->start, res_len(res)); +e_print: + printk(KERN_ERR "Registering PCA9564 FAILED! (%d)\n", ret); + return ret; +} + +static int __devexit i2c_pca_pf_remove(struct platform_device *pdev) +{ + struct i2c_pca_pf_data *i2c = platform_get_drvdata(pdev); + platform_set_drvdata(pdev, NULL); + + i2c_del_adapter(&i2c->adap); + + if (i2c->irq) + free_irq(i2c->irq, i2c); + + if (i2c->gpio > -1) + gpio_free(i2c->gpio); + + iounmap(i2c->reg_base); + release_mem_region(i2c->io_base, i2c->io_size); + kfree(i2c); + + return 0; +} + +static struct platform_driver i2c_pca_pf_driver = { + .probe = i2c_pca_pf_probe, + .remove = __devexit_p(i2c_pca_pf_remove), + .driver = { + .name = "i2c-pca-platform", + .owner = THIS_MODULE, + }, +}; + +static int __init i2c_pca_pf_init(void) +{ + return platform_driver_register(&i2c_pca_pf_driver); +} + +static void __exit i2c_pca_pf_exit(void) +{ + platform_driver_unregister(&i2c_pca_pf_driver); +} + +MODULE_AUTHOR("Wolfram Sang <w.sang@pengutronix.de>"); +MODULE_DESCRIPTION("I2C-PCA9564 platform driver"); +MODULE_LICENSE("GPL"); + +module_init(i2c_pca_pf_init); +module_exit(i2c_pca_pf_exit); + diff --git a/drivers/i2c/busses/i2c-pmcmsp.c b/drivers/i2c/busses/i2c-pmcmsp.c index b03af5653c6..63b3e2c11cf 100644 --- a/drivers/i2c/busses/i2c-pmcmsp.c +++ b/drivers/i2c/busses/i2c-pmcmsp.c @@ -467,7 +467,7 @@ static enum pmcmsptwi_xfer_result pmcmsptwi_xfer_cmd( (cmd->read_len == 0 || cmd->write_len == 0))) { dev_err(&pmcmsptwi_adapter.dev, "%s: Cannot transfer less than 1 byte\n", - __FUNCTION__); + __func__); return -EINVAL; } @@ -475,7 +475,7 @@ static enum pmcmsptwi_xfer_result pmcmsptwi_xfer_cmd( cmd->write_len > MSP_MAX_BYTES_PER_RW) { dev_err(&pmcmsptwi_adapter.dev, "%s: Cannot transfer more than %d bytes\n", - __FUNCTION__, MSP_MAX_BYTES_PER_RW); + __func__, MSP_MAX_BYTES_PER_RW); return -EINVAL; } @@ -627,6 +627,9 @@ static struct i2c_adapter pmcmsptwi_adapter = { .name = DRV_NAME, }; +/* work with hotplug and coldplug */ +MODULE_ALIAS("platform:" DRV_NAME); + static struct platform_driver pmcmsptwi_driver = { .probe = pmcmsptwi_probe, .remove = __devexit_p(pmcmsptwi_remove), diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c index f8d0dff0de7..1ca21084ffc 100644 --- a/drivers/i2c/busses/i2c-pnx.c +++ b/drivers/i2c/busses/i2c-pnx.c @@ -76,7 +76,7 @@ static int i2c_pnx_start(unsigned char slave_addr, struct i2c_adapter *adap) { struct i2c_pnx_algo_data *alg_data = adap->algo_data; - dev_dbg(&adap->dev, "%s(): addr 0x%x mode %d\n", __FUNCTION__, + dev_dbg(&adap->dev, "%s(): addr 0x%x mode %d\n", __func__, slave_addr, alg_data->mif.mode); /* Check for 7 bit slave addresses only */ @@ -110,14 +110,14 @@ static int i2c_pnx_start(unsigned char slave_addr, struct i2c_adapter *adap) iowrite32(ioread32(I2C_REG_STS(alg_data)) | mstatus_tdi | mstatus_afi, I2C_REG_STS(alg_data)); - dev_dbg(&adap->dev, "%s(): sending %#x\n", __FUNCTION__, + dev_dbg(&adap->dev, "%s(): sending %#x\n", __func__, (slave_addr << 1) | start_bit | alg_data->mif.mode); /* Write the slave address, START bit and R/W bit */ iowrite32((slave_addr << 1) | start_bit | alg_data->mif.mode, I2C_REG_TX(alg_data)); - dev_dbg(&adap->dev, "%s(): exit\n", __FUNCTION__); + dev_dbg(&adap->dev, "%s(): exit\n", __func__); return 0; } @@ -135,7 +135,7 @@ static void i2c_pnx_stop(struct i2c_adapter *adap) long timeout = 1000; dev_dbg(&adap->dev, "%s(): entering: stat = %04x.\n", - __FUNCTION__, ioread32(I2C_REG_STS(alg_data))); + __func__, ioread32(I2C_REG_STS(alg_data))); /* Write a STOP bit to TX FIFO */ iowrite32(0xff | stop_bit, I2C_REG_TX(alg_data)); @@ -149,7 +149,7 @@ static void i2c_pnx_stop(struct i2c_adapter *adap) } dev_dbg(&adap->dev, "%s(): exiting: stat = %04x.\n", - __FUNCTION__, ioread32(I2C_REG_STS(alg_data))); + __func__, ioread32(I2C_REG_STS(alg_data))); } /** @@ -164,7 +164,7 @@ static int i2c_pnx_master_xmit(struct i2c_adapter *adap) u32 val; dev_dbg(&adap->dev, "%s(): entering: stat = %04x.\n", - __FUNCTION__, ioread32(I2C_REG_STS(alg_data))); + __func__, ioread32(I2C_REG_STS(alg_data))); if (alg_data->mif.len > 0) { /* We still have something to talk about... */ @@ -179,7 +179,7 @@ static int i2c_pnx_master_xmit(struct i2c_adapter *adap) alg_data->mif.len--; iowrite32(val, I2C_REG_TX(alg_data)); - dev_dbg(&adap->dev, "%s(): xmit %#x [%d]\n", __FUNCTION__, + dev_dbg(&adap->dev, "%s(): xmit %#x [%d]\n", __func__, val, alg_data->mif.len + 1); if (alg_data->mif.len == 0) { @@ -197,7 +197,7 @@ static int i2c_pnx_master_xmit(struct i2c_adapter *adap) del_timer_sync(&alg_data->mif.timer); dev_dbg(&adap->dev, "%s(): Waking up xfer routine.\n", - __FUNCTION__); + __func__); complete(&alg_data->mif.complete); } @@ -213,13 +213,13 @@ static int i2c_pnx_master_xmit(struct i2c_adapter *adap) /* Stop timer. */ del_timer_sync(&alg_data->mif.timer); dev_dbg(&adap->dev, "%s(): Waking up xfer routine after " - "zero-xfer.\n", __FUNCTION__); + "zero-xfer.\n", __func__); complete(&alg_data->mif.complete); } dev_dbg(&adap->dev, "%s(): exiting: stat = %04x.\n", - __FUNCTION__, ioread32(I2C_REG_STS(alg_data))); + __func__, ioread32(I2C_REG_STS(alg_data))); return 0; } @@ -237,14 +237,14 @@ static int i2c_pnx_master_rcv(struct i2c_adapter *adap) u32 ctl = 0; dev_dbg(&adap->dev, "%s(): entering: stat = %04x.\n", - __FUNCTION__, ioread32(I2C_REG_STS(alg_data))); + __func__, ioread32(I2C_REG_STS(alg_data))); /* Check, whether there is already data, * or we didn't 'ask' for it yet. */ if (ioread32(I2C_REG_STS(alg_data)) & mstatus_rfe) { dev_dbg(&adap->dev, "%s(): Write dummy data to fill " - "Rx-fifo...\n", __FUNCTION__); + "Rx-fifo...\n", __func__); if (alg_data->mif.len == 1) { /* Last byte, do not acknowledge next rcv. */ @@ -276,7 +276,7 @@ static int i2c_pnx_master_rcv(struct i2c_adapter *adap) if (alg_data->mif.len > 0) { val = ioread32(I2C_REG_RX(alg_data)); *alg_data->mif.buf++ = (u8) (val & 0xff); - dev_dbg(&adap->dev, "%s(): rcv 0x%x [%d]\n", __FUNCTION__, val, + dev_dbg(&adap->dev, "%s(): rcv 0x%x [%d]\n", __func__, val, alg_data->mif.len); alg_data->mif.len--; @@ -300,7 +300,7 @@ static int i2c_pnx_master_rcv(struct i2c_adapter *adap) } dev_dbg(&adap->dev, "%s(): exiting: stat = %04x.\n", - __FUNCTION__, ioread32(I2C_REG_STS(alg_data))); + __func__, ioread32(I2C_REG_STS(alg_data))); return 0; } @@ -312,7 +312,7 @@ static irqreturn_t i2c_pnx_interrupt(int irq, void *dev_id) struct i2c_pnx_algo_data *alg_data = adap->algo_data; dev_dbg(&adap->dev, "%s(): mstat = %x mctrl = %x, mode = %d\n", - __FUNCTION__, + __func__, ioread32(I2C_REG_STS(alg_data)), ioread32(I2C_REG_CTL(alg_data)), alg_data->mif.mode); @@ -336,7 +336,7 @@ static irqreturn_t i2c_pnx_interrupt(int irq, void *dev_id) /* Slave did not acknowledge, generate a STOP */ dev_dbg(&adap->dev, "%s(): " "Slave did not acknowledge, generating a STOP.\n", - __FUNCTION__); + __func__); i2c_pnx_stop(adap); /* Disable master interrupts. */ @@ -375,7 +375,7 @@ static irqreturn_t i2c_pnx_interrupt(int irq, void *dev_id) iowrite32(stat | mstatus_tdi | mstatus_afi, I2C_REG_STS(alg_data)); dev_dbg(&adap->dev, "%s(): exiting, stat = %x ctrl = %x.\n", - __FUNCTION__, ioread32(I2C_REG_STS(alg_data)), + __func__, ioread32(I2C_REG_STS(alg_data)), ioread32(I2C_REG_CTL(alg_data))); return IRQ_HANDLED; @@ -447,7 +447,7 @@ i2c_pnx_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) u32 stat = ioread32(I2C_REG_STS(alg_data)); dev_dbg(&adap->dev, "%s(): entering: %d messages, stat = %04x.\n", - __FUNCTION__, num, ioread32(I2C_REG_STS(alg_data))); + __func__, num, ioread32(I2C_REG_STS(alg_data))); bus_reset_if_active(adap); @@ -473,7 +473,7 @@ i2c_pnx_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) alg_data->mif.ret = 0; alg_data->last = (i == num - 1); - dev_dbg(&adap->dev, "%s(): mode %d, %d bytes\n", __FUNCTION__, + dev_dbg(&adap->dev, "%s(): mode %d, %d bytes\n", __func__, alg_data->mif.mode, alg_data->mif.len); @@ -498,7 +498,7 @@ i2c_pnx_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) if (!(rc = alg_data->mif.ret)) completed++; dev_dbg(&adap->dev, "%s(): Complete, return code = %d.\n", - __FUNCTION__, rc); + __func__, rc); /* Clear TDI and AFI bits in case they are set. */ if ((stat = ioread32(I2C_REG_STS(alg_data))) & mstatus_tdi) { @@ -522,7 +522,7 @@ i2c_pnx_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) alg_data->mif.len = 0; dev_dbg(&adap->dev, "%s(): exiting, stat = %x\n", - __FUNCTION__, ioread32(I2C_REG_STS(alg_data))); + __func__, ioread32(I2C_REG_STS(alg_data))); if (completed != num) return ((rc < 0) ? rc : -EREMOTEIO); @@ -563,7 +563,7 @@ static int __devinit i2c_pnx_probe(struct platform_device *pdev) if (!i2c_pnx || !i2c_pnx->adapter) { dev_err(&pdev->dev, "%s: no platform data supplied\n", - __FUNCTION__); + __func__); ret = -EINVAL; goto out; } @@ -697,6 +697,7 @@ static void __exit i2c_adap_pnx_exit(void) MODULE_AUTHOR("Vitaly Wool, Dennis Kovalev <source@mvista.com>"); MODULE_DESCRIPTION("I2C driver for Philips IP3204-based I2C busses"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:pnx-i2c"); /* We need to make sure I2C is initialized before USB */ subsys_initcall(i2c_adap_pnx_init); diff --git a/drivers/i2c/busses/i2c-powermac.c b/drivers/i2c/busses/i2c-powermac.c index 7813127649a..22f6d5c00d8 100644 --- a/drivers/i2c/busses/i2c-powermac.c +++ b/drivers/i2c/busses/i2c-powermac.c @@ -263,6 +263,9 @@ static int __devexit i2c_powermac_probe(struct platform_device *dev) } +/* work with hotplug and coldplug */ +MODULE_ALIAS("platform:i2c-powermac"); + static struct platform_driver i2c_powermac_driver = { .probe = i2c_powermac_probe, .remove = __devexit_p(i2c_powermac_remove), diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c index 6fd2d6a84ef..eb69fbadc9c 100644 --- a/drivers/i2c/busses/i2c-pxa.c +++ b/drivers/i2c/busses/i2c-pxa.c @@ -155,7 +155,7 @@ static void i2c_pxa_show_state(struct pxa_i2c *i2c, int lno, const char *fname) readl(_ISR(i2c)), readl(_ICR(i2c)), readl(_IBMR(i2c))); } -#define show_state(i2c) i2c_pxa_show_state(i2c, __LINE__, __FUNCTION__) +#define show_state(i2c) i2c_pxa_show_state(i2c, __LINE__, __func__) #else #define i2c_debug 0 @@ -1132,6 +1132,7 @@ static void __exit i2c_adap_pxa_exit(void) } MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:pxa2xx-i2c"); module_init(i2c_adap_pxa_init); module_exit(i2c_adap_pxa_exit); diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index c44ada5f429..1305ef190fc 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -276,12 +276,12 @@ static int i2s_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat) switch (i2c->state) { case STATE_IDLE: - dev_err(i2c->dev, "%s: called in STATE_IDLE\n", __FUNCTION__); + dev_err(i2c->dev, "%s: called in STATE_IDLE\n", __func__); goto out; break; case STATE_STOP: - dev_err(i2c->dev, "%s: called in STATE_STOP\n", __FUNCTION__); + dev_err(i2c->dev, "%s: called in STATE_STOP\n", __func__); s3c24xx_i2c_disable_irq(i2c); goto out_ack; @@ -948,3 +948,4 @@ module_exit(i2c_adap_s3c_exit); MODULE_DESCRIPTION("S3C24XX I2C Bus driver"); MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:s3c2410-i2c"); diff --git a/drivers/i2c/busses/i2c-sh7760.c b/drivers/i2c/busses/i2c-sh7760.c new file mode 100644 index 00000000000..5e0e254976d --- /dev/null +++ b/drivers/i2c/busses/i2c-sh7760.c @@ -0,0 +1,577 @@ +/* + * I2C bus driver for the SH7760 I2C Interfaces. + * + * (c) 2005-2008 MSC Vertriebsges.m.b.H, Manuel Lauss <mlau@msc-ge.com> + * + * licensed under the terms outlined in the file COPYING. + * + */ + +#include <linux/completion.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/i2c.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/platform_device.h> +#include <linux/slab.h> + +#include <asm/clock.h> +#include <asm/i2c-sh7760.h> +#include <asm/io.h> + +/* register offsets */ +#define I2CSCR 0x0 /* slave ctrl */ +#define I2CMCR 0x4 /* master ctrl */ +#define I2CSSR 0x8 /* slave status */ +#define I2CMSR 0xC /* master status */ +#define I2CSIER 0x10 /* slave irq enable */ +#define I2CMIER 0x14 /* master irq enable */ +#define I2CCCR 0x18 /* clock dividers */ +#define I2CSAR 0x1c /* slave address */ +#define I2CMAR 0x20 /* master address */ +#define I2CRXTX 0x24 /* data port */ +#define I2CFCR 0x28 /* fifo control */ +#define I2CFSR 0x2C /* fifo status */ +#define I2CFIER 0x30 /* fifo irq enable */ +#define I2CRFDR 0x34 /* rx fifo count */ +#define I2CTFDR 0x38 /* tx fifo count */ + +#define REGSIZE 0x3C + +#define MCR_MDBS 0x80 /* non-fifo mode switch */ +#define MCR_FSCL 0x40 /* override SCL pin */ +#define MCR_FSDA 0x20 /* override SDA pin */ +#define MCR_OBPC 0x10 /* override pins */ +#define MCR_MIE 0x08 /* master if enable */ +#define MCR_TSBE 0x04 +#define MCR_FSB 0x02 /* force stop bit */ +#define MCR_ESG 0x01 /* en startbit gen. */ + +#define MSR_MNR 0x40 /* nack received */ +#define MSR_MAL 0x20 /* arbitration lost */ +#define MSR_MST 0x10 /* sent a stop */ +#define MSR_MDE 0x08 +#define MSR_MDT 0x04 +#define MSR_MDR 0x02 +#define MSR_MAT 0x01 /* slave addr xfer done */ + +#define MIE_MNRE 0x40 /* nack irq en */ +#define MIE_MALE 0x20 /* arblos irq en */ +#define MIE_MSTE 0x10 /* stop irq en */ +#define MIE_MDEE 0x08 +#define MIE_MDTE 0x04 +#define MIE_MDRE 0x02 +#define MIE_MATE 0x01 /* address sent irq en */ + +#define FCR_RFRST 0x02 /* reset rx fifo */ +#define FCR_TFRST 0x01 /* reset tx fifo */ + +#define FSR_TEND 0x04 /* last byte sent */ +#define FSR_RDF 0x02 /* rx fifo trigger */ +#define FSR_TDFE 0x01 /* tx fifo empty */ + +#define FIER_TEIE 0x04 /* tx fifo empty irq en */ +#define FIER_RXIE 0x02 /* rx fifo trig irq en */ +#define FIER_TXIE 0x01 /* tx fifo trig irq en */ + +#define FIFO_SIZE 16 + +struct cami2c { + void __iomem *iobase; + struct i2c_adapter adap; + + /* message processing */ + struct i2c_msg *msg; +#define IDF_SEND 1 +#define IDF_RECV 2 +#define IDF_STOP 4 + int flags; + +#define IDS_DONE 1 +#define IDS_ARBLOST 2 +#define IDS_NACK 4 + int status; + struct completion xfer_done; + + int irq; + struct resource *ioarea; +}; + +static inline void OUT32(struct cami2c *cam, int reg, unsigned long val) +{ + ctrl_outl(val, (unsigned long)cam->iobase + reg); +} + +static inline unsigned long IN32(struct cami2c *cam, int reg) +{ + return ctrl_inl((unsigned long)cam->iobase + reg); +} + +static irqreturn_t sh7760_i2c_irq(int irq, void *ptr) +{ + struct cami2c *id = ptr; + struct i2c_msg *msg = id->msg; + char *data = msg->buf; + unsigned long msr, fsr, fier, len; + + msr = IN32(id, I2CMSR); + fsr = IN32(id, I2CFSR); + + /* arbitration lost */ + if (msr & MSR_MAL) { + OUT32(id, I2CMCR, 0); + OUT32(id, I2CSCR, 0); + OUT32(id, I2CSAR, 0); + id->status |= IDS_DONE | IDS_ARBLOST; + goto out; + } + + if (msr & MSR_MNR) { + /* NACK handling is very screwed up. After receiving a + * NAK IRQ one has to wait a bit before writing to any + * registers, or the ctl will lock up. After that delay + * do a normal i2c stop. Then wait at least 1 ms before + * attempting another transfer or ctl will stop working + */ + udelay(100); /* wait or risk ctl hang */ + OUT32(id, I2CFCR, FCR_RFRST | FCR_TFRST); + OUT32(id, I2CMCR, MCR_MIE | MCR_FSB); + OUT32(id, I2CFIER, 0); + OUT32(id, I2CMIER, MIE_MSTE); + OUT32(id, I2CSCR, 0); + OUT32(id, I2CSAR, 0); + id->status |= IDS_NACK; + msr &= ~MSR_MAT; + fsr = 0; + /* In some cases the MST bit is also set. */ + } + + /* i2c-stop was sent */ + if (msr & MSR_MST) { + id->status |= IDS_DONE; + goto out; + } + + /* i2c slave addr was sent; set to "normal" operation */ + if (msr & MSR_MAT) + OUT32(id, I2CMCR, MCR_MIE); + + fier = IN32(id, I2CFIER); + + if (fsr & FSR_RDF) { + len = IN32(id, I2CRFDR); + if (msg->len <= len) { + if (id->flags & IDF_STOP) { + OUT32(id, I2CMCR, MCR_MIE | MCR_FSB); + OUT32(id, I2CFIER, 0); + /* manual says: wait >= 0.5 SCL times */ + udelay(5); + /* next int should be MST */ + } else { + id->status |= IDS_DONE; + /* keep the RDF bit: ctrl holds SCL low + * until the setup for the next i2c_msg + * clears this bit. + */ + fsr &= ~FSR_RDF; + } + } + while (msg->len && len) { + *data++ = IN32(id, I2CRXTX); + msg->len--; + len--; + } + + if (msg->len) { + len = (msg->len >= FIFO_SIZE) ? FIFO_SIZE - 1 + : msg->len - 1; + + OUT32(id, I2CFCR, FCR_TFRST | ((len & 0xf) << 4)); + } + + } else if (id->flags & IDF_SEND) { + if ((fsr & FSR_TEND) && (msg->len < 1)) { + if (id->flags & IDF_STOP) { + OUT32(id, I2CMCR, MCR_MIE | MCR_FSB); + } else { + id->status |= IDS_DONE; + /* keep the TEND bit: ctl holds SCL low + * until the setup for the next i2c_msg + * clears this bit. + */ + fsr &= ~FSR_TEND; + } + } + if (fsr & FSR_TDFE) { + while (msg->len && (IN32(id, I2CTFDR) < FIFO_SIZE)) { + OUT32(id, I2CRXTX, *data++); + msg->len--; + } + + if (msg->len < 1) { + fier &= ~FIER_TXIE; + OUT32(id, I2CFIER, fier); + } else { + len = (msg->len >= FIFO_SIZE) ? 2 : 0; + OUT32(id, I2CFCR, + FCR_RFRST | ((len & 3) << 2)); + } + } + } +out: + if (id->status & IDS_DONE) { + OUT32(id, I2CMIER, 0); + OUT32(id, I2CFIER, 0); + id->msg = NULL; + complete(&id->xfer_done); + } + /* clear status flags and ctrl resumes work */ + OUT32(id, I2CMSR, ~msr); + OUT32(id, I2CFSR, ~fsr); + OUT32(id, I2CSSR, 0); + + return IRQ_HANDLED; +} + + +/* prepare and start a master receive operation */ +static void sh7760_i2c_mrecv(struct cami2c *id) +{ + int len; + + id->flags |= IDF_RECV; + + /* set the slave addr reg; otherwise rcv wont work! */ + OUT32(id, I2CSAR, 0xfe); + OUT32(id, I2CMAR, (id->msg->addr << 1) | 1); + + /* adjust rx fifo trigger */ + if (id->msg->len >= FIFO_SIZE) + len = FIFO_SIZE - 1; /* trigger at fifo full */ + else + len = id->msg->len - 1; /* trigger before all received */ + + OUT32(id, I2CFCR, FCR_RFRST | FCR_TFRST); + OUT32(id, I2CFCR, FCR_TFRST | ((len & 0xF) << 4)); + + OUT32(id, I2CMSR, 0); + OUT32(id, I2CMCR, MCR_MIE | MCR_ESG); + OUT32(id, I2CMIER, MIE_MNRE | MIE_MALE | MIE_MSTE | MIE_MATE); + OUT32(id, I2CFIER, FIER_RXIE); +} + +/* prepare and start a master send operation */ +static void sh7760_i2c_msend(struct cami2c *id) +{ + int len; + + id->flags |= IDF_SEND; + + /* set the slave addr reg; otherwise xmit wont work! */ + OUT32(id, I2CSAR, 0xfe); + OUT32(id, I2CMAR, (id->msg->addr << 1) | 0); + + /* adjust tx fifo trigger */ + if (id->msg->len >= FIFO_SIZE) + len = 2; /* trig: 2 bytes left in TX fifo */ + else + len = 0; /* trig: 8 bytes left in TX fifo */ + + OUT32(id, I2CFCR, FCR_RFRST | FCR_TFRST); + OUT32(id, I2CFCR, FCR_RFRST | ((len & 3) << 2)); + + while (id->msg->len && IN32(id, I2CTFDR) < FIFO_SIZE) { + OUT32(id, I2CRXTX, *(id->msg->buf)); + (id->msg->len)--; + (id->msg->buf)++; + } + + OUT32(id, I2CMSR, 0); + OUT32(id, I2CMCR, MCR_MIE | MCR_ESG); + OUT32(id, I2CFSR, 0); + OUT32(id, I2CMIER, MIE_MNRE | MIE_MALE | MIE_MSTE | MIE_MATE); + OUT32(id, I2CFIER, FIER_TEIE | (id->msg->len ? FIER_TXIE : 0)); +} + +static inline int sh7760_i2c_busy_check(struct cami2c *id) +{ + return (IN32(id, I2CMCR) & MCR_FSDA); +} + +static int sh7760_i2c_master_xfer(struct i2c_adapter *adap, + struct i2c_msg *msgs, + int num) +{ + struct cami2c *id = adap->algo_data; + int i, retr; + + if (sh7760_i2c_busy_check(id)) { + dev_err(&adap->dev, "sh7760-i2c%d: bus busy!\n", adap->nr); + return -EBUSY; + } + + i = 0; + while (i < num) { + retr = adap->retries; +retry: + id->flags = ((i == (num-1)) ? IDF_STOP : 0); + id->status = 0; + id->msg = msgs; + init_completion(&id->xfer_done); + + if (msgs->flags & I2C_M_RD) + sh7760_i2c_mrecv(id); + else + sh7760_i2c_msend(id); + + wait_for_completion(&id->xfer_done); + + if (id->status == 0) { + num = -EIO; + break; + } + + if (id->status & IDS_NACK) { + /* wait a bit or i2c module stops working */ + mdelay(1); + num = -EREMOTEIO; + break; + } + + if (id->status & IDS_ARBLOST) { + if (retr--) { + mdelay(2); + goto retry; + } + num = -EREMOTEIO; + break; + } + + msgs++; + i++; + } + + id->msg = NULL; + id->flags = 0; + id->status = 0; + + OUT32(id, I2CMCR, 0); + OUT32(id, I2CMSR, 0); + OUT32(id, I2CMIER, 0); + OUT32(id, I2CFIER, 0); + + /* reset slave module registers too: master mode enables slave + * module for receive ops (ack, data). Without this reset, + * eternal bus activity might be reported after NACK / ARBLOST. + */ + OUT32(id, I2CSCR, 0); + OUT32(id, I2CSAR, 0); + OUT32(id, I2CSSR, 0); + + return num; +} + +static u32 sh7760_i2c_func(struct i2c_adapter *adap) +{ + return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK); +} + +static const struct i2c_algorithm sh7760_i2c_algo = { + .master_xfer = sh7760_i2c_master_xfer, + .functionality = sh7760_i2c_func, +}; + +/* calculate CCR register setting for a desired scl clock. SCL clock is + * derived from I2C module clock (iclk) which in turn is derived from + * peripheral module clock (mclk, usually around 33MHz): + * iclk = mclk/(CDF + 1). iclk must be < 20MHz. + * scl = iclk/(SCGD*8 + 20). + */ +static int __devinit calc_CCR(unsigned long scl_hz) +{ + struct clk *mclk; + unsigned long mck, m1, dff, odff, iclk; + signed char cdf, cdfm; + int scgd, scgdm, scgds; + + mclk = clk_get(NULL, "module_clk"); + if (IS_ERR(mclk)) { + return PTR_ERR(mclk); + } else { + mck = mclk->rate; + clk_put(mclk); + } + + odff = scl_hz; + scgdm = cdfm = m1 = 0; + for (cdf = 3; cdf >= 0; cdf--) { + iclk = mck / (1 + cdf); + if (iclk >= 20000000) + continue; + scgds = ((iclk / scl_hz) - 20) >> 3; + for (scgd = scgds; (scgd < 63) && scgd <= scgds + 1; scgd++) { + m1 = iclk / (20 + (scgd << 3)); + dff = abs(scl_hz - m1); + if (dff < odff) { + odff = dff; + cdfm = cdf; + scgdm = scgd; + } + } + } + /* fail if more than 25% off of requested SCL */ + if (odff > (scl_hz >> 2)) + return -EINVAL; + + /* create a CCR register value */ + return ((scgdm << 2) | cdfm); +} + +static int __devinit sh7760_i2c_probe(struct platform_device *pdev) +{ + struct sh7760_i2c_platdata *pd; + struct resource *res; + struct cami2c *id; + int ret; + + pd = pdev->dev.platform_data; + if (!pd) { + dev_err(&pdev->dev, "no platform_data!\n"); + ret = -ENODEV; + goto out0; + } + + id = kzalloc(sizeof(struct cami2c), GFP_KERNEL); + if (!id) { + dev_err(&pdev->dev, "no mem for private data\n"); + ret = -ENOMEM; + goto out0; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "no mmio resources\n"); + ret = -ENODEV; + goto out1; + } + + id->ioarea = request_mem_region(res->start, REGSIZE, pdev->name); + if (!id->ioarea) { + dev_err(&pdev->dev, "mmio already reserved\n"); + ret = -EBUSY; + goto out1; + } + + id->iobase = ioremap(res->start, REGSIZE); + if (!id->iobase) { + dev_err(&pdev->dev, "cannot ioremap\n"); + ret = -ENODEV; + goto out2; + } + + id->irq = platform_get_irq(pdev, 0); + + id->adap.nr = pdev->id; + id->adap.algo = &sh7760_i2c_algo; + id->adap.class = I2C_CLASS_ALL; + id->adap.retries = 3; + id->adap.algo_data = id; + id->adap.dev.parent = &pdev->dev; + snprintf(id->adap.name, sizeof(id->adap.name), + "SH7760 I2C at %08lx", (unsigned long)res->start); + + OUT32(id, I2CMCR, 0); + OUT32(id, I2CMSR, 0); + OUT32(id, I2CMIER, 0); + OUT32(id, I2CMAR, 0); + OUT32(id, I2CSIER, 0); + OUT32(id, I2CSAR, 0); + OUT32(id, I2CSCR, 0); + OUT32(id, I2CSSR, 0); + OUT32(id, I2CFIER, 0); + OUT32(id, I2CFCR, FCR_RFRST | FCR_TFRST); + OUT32(id, I2CFSR, 0); + + ret = calc_CCR(pd->speed_khz * 1000); + if (ret < 0) { + dev_err(&pdev->dev, "invalid SCL clock: %dkHz\n", + pd->speed_khz); + goto out3; + } + OUT32(id, I2CCCR, ret); + + if (request_irq(id->irq, sh7760_i2c_irq, IRQF_DISABLED, + SH7760_I2C_DEVNAME, id)) { + dev_err(&pdev->dev, "cannot get irq %d\n", id->irq); + ret = -EBUSY; + goto out3; + } + + ret = i2c_add_numbered_adapter(&id->adap); + if (ret < 0) { + dev_err(&pdev->dev, "reg adap failed: %d\n", ret); + goto out4; + } + + platform_set_drvdata(pdev, id); + + dev_info(&pdev->dev, "%d kHz mmio %08x irq %d\n", + pd->speed_khz, res->start, id->irq); + + return 0; + +out4: + free_irq(id->irq, id); +out3: + iounmap(id->iobase); +out2: + release_resource(id->ioarea); + kfree(id->ioarea); +out1: + kfree(id); +out0: + return ret; +} + +static int __devexit sh7760_i2c_remove(struct platform_device *pdev) +{ + struct cami2c *id = platform_get_drvdata(pdev); + + i2c_del_adapter(&id->adap); + free_irq(id->irq, id); + iounmap(id->iobase); + release_resource(id->ioarea); + kfree(id->ioarea); + kfree(id); + platform_set_drvdata(pdev, NULL); + + return 0; +} + +static struct platform_driver sh7760_i2c_drv = { + .driver = { + .name = SH7760_I2C_DEVNAME, + .owner = THIS_MODULE, + }, + .probe = sh7760_i2c_probe, + .remove = __devexit_p(sh7760_i2c_remove), +}; + +static int __init sh7760_i2c_init(void) +{ + return platform_driver_register(&sh7760_i2c_drv); +} + +static void __exit sh7760_i2c_exit(void) +{ + platform_driver_unregister(&sh7760_i2c_drv); +} + +module_init(sh7760_i2c_init); +module_exit(sh7760_i2c_exit); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("SH7760 I2C bus driver"); +MODULE_AUTHOR("Manuel Lauss <mano@roarinelk.homelinux.net>"); diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c new file mode 100644 index 00000000000..840e634fa31 --- /dev/null +++ b/drivers/i2c/busses/i2c-sh_mobile.c @@ -0,0 +1,500 @@ +/* + * SuperH Mobile I2C Controller + * + * Copyright (C) 2008 Magnus Damm + * + * Portions of the code based on out-of-tree driver i2c-sh7343.c + * Copyright (c) 2006 Carlos Munoz <carlos@kenati.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/i2c.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/io.h> + +enum sh_mobile_i2c_op { + OP_START = 0, + OP_TX_ONLY, + OP_TX_STOP, + OP_TX_TO_RX, + OP_RX_ONLY, + OP_RX_STOP, +}; + +struct sh_mobile_i2c_data { + struct device *dev; + void __iomem *reg; + struct i2c_adapter adap; + + struct clk *clk; + u_int8_t iccl; + u_int8_t icch; + + spinlock_t lock; + wait_queue_head_t wait; + struct i2c_msg *msg; + int pos; + int sr; +}; + +#define NORMAL_SPEED 100000 /* FAST_SPEED 400000 */ + +/* Register offsets */ +#define ICDR(pd) (pd->reg + 0x00) +#define ICCR(pd) (pd->reg + 0x04) +#define ICSR(pd) (pd->reg + 0x08) +#define ICIC(pd) (pd->reg + 0x0c) +#define ICCL(pd) (pd->reg + 0x10) +#define ICCH(pd) (pd->reg + 0x14) + +/* Register bits */ +#define ICCR_ICE 0x80 +#define ICCR_RACK 0x40 +#define ICCR_TRS 0x10 +#define ICCR_BBSY 0x04 +#define ICCR_SCP 0x01 + +#define ICSR_SCLM 0x80 +#define ICSR_SDAM 0x40 +#define SW_DONE 0x20 +#define ICSR_BUSY 0x10 +#define ICSR_AL 0x08 +#define ICSR_TACK 0x04 +#define ICSR_WAIT 0x02 +#define ICSR_DTE 0x01 + +#define ICIC_ALE 0x08 +#define ICIC_TACKE 0x04 +#define ICIC_WAITE 0x02 +#define ICIC_DTEE 0x01 + +static void activate_ch(struct sh_mobile_i2c_data *pd) +{ + /* Make sure the clock is enabled */ + clk_enable(pd->clk); + + /* Enable channel and configure rx ack */ + iowrite8(ioread8(ICCR(pd)) | ICCR_ICE, ICCR(pd)); + + /* Mask all interrupts */ + iowrite8(0, ICIC(pd)); + + /* Set the clock */ + iowrite8(pd->iccl, ICCL(pd)); + iowrite8(pd->icch, ICCH(pd)); +} + +static void deactivate_ch(struct sh_mobile_i2c_data *pd) +{ + /* Clear/disable interrupts */ + iowrite8(0, ICSR(pd)); + iowrite8(0, ICIC(pd)); + + /* Disable channel */ + iowrite8(ioread8(ICCR(pd)) & ~ICCR_ICE, ICCR(pd)); + + /* Disable clock */ + clk_disable(pd->clk); +} + +static unsigned char i2c_op(struct sh_mobile_i2c_data *pd, + enum sh_mobile_i2c_op op, unsigned char data) +{ + unsigned char ret = 0; + unsigned long flags; + + dev_dbg(pd->dev, "op %d, data in 0x%02x\n", op, data); + + spin_lock_irqsave(&pd->lock, flags); + + switch (op) { + case OP_START: + iowrite8(0x94, ICCR(pd)); + break; + case OP_TX_ONLY: + iowrite8(data, ICDR(pd)); + break; + case OP_TX_STOP: + iowrite8(data, ICDR(pd)); + iowrite8(0x90, ICCR(pd)); + iowrite8(ICIC_ALE | ICIC_TACKE, ICIC(pd)); + break; + case OP_TX_TO_RX: + iowrite8(data, ICDR(pd)); + iowrite8(0x81, ICCR(pd)); + break; + case OP_RX_ONLY: + ret = ioread8(ICDR(pd)); + break; + case OP_RX_STOP: + ret = ioread8(ICDR(pd)); + iowrite8(0xc0, ICCR(pd)); + break; + } + + spin_unlock_irqrestore(&pd->lock, flags); + + dev_dbg(pd->dev, "op %d, data out 0x%02x\n", op, ret); + return ret; +} + +static irqreturn_t sh_mobile_i2c_isr(int irq, void *dev_id) +{ + struct platform_device *dev = dev_id; + struct sh_mobile_i2c_data *pd = platform_get_drvdata(dev); + struct i2c_msg *msg = pd->msg; + unsigned char data, sr; + int wakeup = 0; + + sr = ioread8(ICSR(pd)); + pd->sr |= sr; + + dev_dbg(pd->dev, "i2c_isr 0x%02x 0x%02x %s %d %d!\n", sr, pd->sr, + (msg->flags & I2C_M_RD) ? "read" : "write", + pd->pos, msg->len); + + if (sr & (ICSR_AL | ICSR_TACK)) { + iowrite8(0, ICIC(pd)); /* disable interrupts */ + wakeup = 1; + goto do_wakeup; + } + + if (pd->pos == msg->len) { + i2c_op(pd, OP_RX_ONLY, 0); + wakeup = 1; + goto do_wakeup; + } + + if (pd->pos == -1) { + data = (msg->addr & 0x7f) << 1; + data |= (msg->flags & I2C_M_RD) ? 1 : 0; + } else + data = msg->buf[pd->pos]; + + if ((pd->pos == -1) || !(msg->flags & I2C_M_RD)) { + if (msg->flags & I2C_M_RD) + i2c_op(pd, OP_TX_TO_RX, data); + else if (pd->pos == (msg->len - 1)) { + i2c_op(pd, OP_TX_STOP, data); + wakeup = 1; + } else + i2c_op(pd, OP_TX_ONLY, data); + } else { + if (pd->pos == (msg->len - 1)) + data = i2c_op(pd, OP_RX_STOP, 0); + else + data = i2c_op(pd, OP_RX_ONLY, 0); + + msg->buf[pd->pos] = data; + } + pd->pos++; + + do_wakeup: + if (wakeup) { + pd->sr |= SW_DONE; + wake_up(&pd->wait); + } + + return IRQ_HANDLED; +} + +static int start_ch(struct sh_mobile_i2c_data *pd, struct i2c_msg *usr_msg) +{ + /* Initialize channel registers */ + iowrite8(ioread8(ICCR(pd)) & ~ICCR_ICE, ICCR(pd)); + + /* Enable channel and configure rx ack */ + iowrite8(ioread8(ICCR(pd)) | ICCR_ICE, ICCR(pd)); + + /* Set the clock */ + iowrite8(pd->iccl, ICCL(pd)); + iowrite8(pd->icch, ICCH(pd)); + + pd->msg = usr_msg; + pd->pos = -1; + pd->sr = 0; + + /* Enable all interrupts except wait */ + iowrite8(ioread8(ICIC(pd)) | ICIC_ALE | ICIC_TACKE | ICIC_DTEE, + ICIC(pd)); + return 0; +} + +static int sh_mobile_i2c_xfer(struct i2c_adapter *adapter, + struct i2c_msg *msgs, + int num) +{ + struct sh_mobile_i2c_data *pd = i2c_get_adapdata(adapter); + struct i2c_msg *msg; + int err = 0; + u_int8_t val; + int i, k, retry_count; + + activate_ch(pd); + + /* Process all messages */ + for (i = 0; i < num; i++) { + msg = &msgs[i]; + + err = start_ch(pd, msg); + if (err) + break; + + i2c_op(pd, OP_START, 0); + + /* The interrupt handler takes care of the rest... */ + k = wait_event_timeout(pd->wait, + pd->sr & (ICSR_TACK | SW_DONE), + 5 * HZ); + if (!k) + dev_err(pd->dev, "Transfer request timed out\n"); + + retry_count = 10; +again: + val = ioread8(ICSR(pd)); + + dev_dbg(pd->dev, "val 0x%02x pd->sr 0x%02x\n", val, pd->sr); + + if ((val | pd->sr) & (ICSR_TACK | ICSR_AL)) { + err = -EIO; + break; + } + + /* the interrupt handler may wake us up before the + * transfer is finished, so poll the hardware + * until we're done. + */ + + if (!(!(val & ICSR_BUSY) && (val & ICSR_SCLM) && + (val & ICSR_SDAM))) { + msleep(1); + if (retry_count--) + goto again; + + err = -EIO; + dev_err(pd->dev, "Polling timed out\n"); + break; + } + } + + deactivate_ch(pd); + + if (!err) + err = num; + return err; +} + +static u32 sh_mobile_i2c_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; +} + +static struct i2c_algorithm sh_mobile_i2c_algorithm = { + .functionality = sh_mobile_i2c_func, + .master_xfer = sh_mobile_i2c_xfer, +}; + +static void sh_mobile_i2c_setup_channel(struct platform_device *dev) +{ + struct sh_mobile_i2c_data *pd = platform_get_drvdata(dev); + unsigned long peripheral_clk = clk_get_rate(pd->clk); + u_int32_t num; + u_int32_t denom; + u_int32_t tmp; + + spin_lock_init(&pd->lock); + init_waitqueue_head(&pd->wait); + + /* Calculate the value for iccl. From the data sheet: + * iccl = (p clock / transfer rate) * (L / (L + H)) + * where L and H are the SCL low/high ratio (5/4 in this case). + * We also round off the result. + */ + num = peripheral_clk * 5; + denom = NORMAL_SPEED * 9; + tmp = num * 10 / denom; + if (tmp % 10 >= 5) + pd->iccl = (u_int8_t)((num/denom) + 1); + else + pd->iccl = (u_int8_t)(num/denom); + + /* Calculate the value for icch. From the data sheet: + icch = (p clock / transfer rate) * (H / (L + H)) */ + num = peripheral_clk * 4; + tmp = num * 10 / denom; + if (tmp % 10 >= 5) + pd->icch = (u_int8_t)((num/denom) + 1); + else + pd->icch = (u_int8_t)(num/denom); +} + +static int sh_mobile_i2c_hook_irqs(struct platform_device *dev, int hook) +{ + struct resource *res; + int ret = -ENXIO; + int q, m; + int k = 0; + int n = 0; + + while ((res = platform_get_resource(dev, IORESOURCE_IRQ, k))) { + for (n = res->start; hook && n <= res->end; n++) { + if (request_irq(n, sh_mobile_i2c_isr, IRQF_DISABLED, + dev->dev.bus_id, dev)) + goto rollback; + } + k++; + } + + if (hook) + return k > 0 ? 0 : -ENOENT; + + k--; + ret = 0; + + rollback: + for (q = k; k >= 0; k--) { + for (m = n; m >= res->start; m--) + free_irq(m, dev); + + res = platform_get_resource(dev, IORESOURCE_IRQ, k - 1); + m = res->end; + } + + return ret; +} + +static int sh_mobile_i2c_probe(struct platform_device *dev) +{ + struct sh_mobile_i2c_data *pd; + struct i2c_adapter *adap; + struct resource *res; + int size; + int ret; + + pd = kzalloc(sizeof(struct sh_mobile_i2c_data), GFP_KERNEL); + if (pd == NULL) { + dev_err(&dev->dev, "cannot allocate private data\n"); + return -ENOMEM; + } + + pd->clk = clk_get(&dev->dev, "peripheral_clk"); + if (IS_ERR(pd->clk)) { + dev_err(&dev->dev, "cannot get peripheral clock\n"); + ret = PTR_ERR(pd->clk); + goto err; + } + + ret = sh_mobile_i2c_hook_irqs(dev, 1); + if (ret) { + dev_err(&dev->dev, "cannot request IRQ\n"); + goto err_clk; + } + + pd->dev = &dev->dev; + platform_set_drvdata(dev, pd); + + res = platform_get_resource(dev, IORESOURCE_MEM, 0); + if (res == NULL) { + dev_err(&dev->dev, "cannot find IO resource\n"); + ret = -ENOENT; + goto err_irq; + } + + size = (res->end - res->start) + 1; + + pd->reg = ioremap(res->start, size); + if (pd->reg == NULL) { + dev_err(&dev->dev, "cannot map IO\n"); + ret = -ENXIO; + goto err_irq; + } + + /* setup the private data */ + adap = &pd->adap; + i2c_set_adapdata(adap, pd); + + adap->owner = THIS_MODULE; + adap->algo = &sh_mobile_i2c_algorithm; + adap->dev.parent = &dev->dev; + adap->retries = 5; + adap->nr = dev->id; + + strlcpy(adap->name, dev->name, sizeof(adap->name)); + + sh_mobile_i2c_setup_channel(dev); + + ret = i2c_add_numbered_adapter(adap); + if (ret < 0) { + dev_err(&dev->dev, "cannot add numbered adapter\n"); + goto err_all; + } + + return 0; + + err_all: + iounmap(pd->reg); + err_irq: + sh_mobile_i2c_hook_irqs(dev, 0); + err_clk: + clk_put(pd->clk); + err: + kfree(pd); + return ret; +} + +static int sh_mobile_i2c_remove(struct platform_device *dev) +{ + struct sh_mobile_i2c_data *pd = platform_get_drvdata(dev); + + i2c_del_adapter(&pd->adap); + iounmap(pd->reg); + sh_mobile_i2c_hook_irqs(dev, 0); + clk_put(pd->clk); + kfree(pd); + return 0; +} + +static struct platform_driver sh_mobile_i2c_driver = { + .driver = { + .name = "i2c-sh_mobile", + .owner = THIS_MODULE, + }, + .probe = sh_mobile_i2c_probe, + .remove = sh_mobile_i2c_remove, +}; + +static int __init sh_mobile_i2c_adap_init(void) +{ + return platform_driver_register(&sh_mobile_i2c_driver); +} + +static void __exit sh_mobile_i2c_adap_exit(void) +{ + platform_driver_unregister(&sh_mobile_i2c_driver); +} + +module_init(sh_mobile_i2c_adap_init); +module_exit(sh_mobile_i2c_adap_exit); + +MODULE_DESCRIPTION("SuperH Mobile I2C Bus Controller driver"); +MODULE_AUTHOR("Magnus Damm"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/i2c/busses/i2c-simtec.c b/drivers/i2c/busses/i2c-simtec.c index 10af8d31e12..042fda295f3 100644 --- a/drivers/i2c/busses/i2c-simtec.c +++ b/drivers/i2c/busses/i2c-simtec.c @@ -159,6 +159,9 @@ static int simtec_i2c_remove(struct platform_device *dev) /* device driver */ +/* work with hotplug and coldplug */ +MODULE_ALIAS("platform:simtec-i2c"); + static struct platform_driver simtec_i2c_driver = { .driver = { .name = "simtec-i2c", diff --git a/drivers/i2c/busses/i2c-versatile.c b/drivers/i2c/busses/i2c-versatile.c index 081d9578ce1..4678babd3ce 100644 --- a/drivers/i2c/busses/i2c-versatile.c +++ b/drivers/i2c/busses/i2c-versatile.c @@ -151,3 +151,4 @@ module_exit(i2c_versatile_exit); MODULE_DESCRIPTION("ARM Versatile I2C bus driver"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:versatile-i2c"); diff --git a/drivers/i2c/busses/scx200_acb.c b/drivers/i2c/busses/scx200_acb.c index f5e7a70da83..61abe0f3325 100644 --- a/drivers/i2c/busses/scx200_acb.c +++ b/drivers/i2c/busses/scx200_acb.c @@ -527,7 +527,7 @@ static int __init scx200_create_isa(const char *text, unsigned long base, if (iface == NULL) return -ENOMEM; - if (request_region(base, 8, iface->adapter.name) == 0) { + if (!request_region(base, 8, iface->adapter.name)) { printk(KERN_ERR NAME ": can't allocate io 0x%lx-0x%lx\n", base, base + 8 - 1); rc = -EBUSY; |