diff options
Diffstat (limited to 'drivers/i2c/busses')
| -rw-r--r-- | drivers/i2c/busses/i2c-iop3xx.c | 17 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-iop3xx.h | 2 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-powermac.c | 4 | ||||
| -rw-r--r-- | drivers/i2c/busses/scx200_acb.c | 20 |
4 files changed, 24 insertions, 19 deletions
diff --git a/drivers/i2c/busses/i2c-iop3xx.c b/drivers/i2c/busses/i2c-iop3xx.c index aca7e166860..48c56939c86 100644 --- a/drivers/i2c/busses/i2c-iop3xx.c +++ b/drivers/i2c/busses/i2c-iop3xx.c @@ -21,6 +21,9 @@ * - Make it work with IXP46x chips * - Cleanup function names, coding style, etc * + * - writing to slave address causes latchup on iop331. + * fix: driver refuses to address self. + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, version 2. @@ -73,12 +76,6 @@ iop3xx_i2c_reset(struct i2c_algo_iop3xx_data *iop3xx_adap) } static void -iop3xx_i2c_set_slave_addr(struct i2c_algo_iop3xx_data *iop3xx_adap) -{ - __raw_writel(MYSAR, iop3xx_adap->ioaddr + SAR_OFFSET); -} - -static void iop3xx_i2c_enable(struct i2c_algo_iop3xx_data *iop3xx_adap) { u32 cr = IOP3XX_ICR_GCD | IOP3XX_ICR_SCLEN | IOP3XX_ICR_UE; @@ -248,6 +245,13 @@ iop3xx_i2c_send_target_addr(struct i2c_algo_iop3xx_data *iop3xx_adap, int status; int rc; + /* avoid writing to my slave address (hangs on 80331), + * forbidden in Intel developer manual + */ + if (msg->addr == MYSAR) { + return -EBUSY; + } + __raw_writel(iic_cook_addr(msg), iop3xx_adap->ioaddr + DBR_OFFSET); cr &= ~(IOP3XX_ICR_MSTOP | IOP3XX_ICR_NACK); @@ -498,7 +502,6 @@ iop3xx_i2c_probe(struct platform_device *pdev) spin_lock_init(&adapter_data->lock); iop3xx_i2c_reset(adapter_data); - iop3xx_i2c_set_slave_addr(adapter_data); iop3xx_i2c_enable(adapter_data); platform_set_drvdata(pdev, new_adapter); diff --git a/drivers/i2c/busses/i2c-iop3xx.h b/drivers/i2c/busses/i2c-iop3xx.h index e46ebaea7b1..8485861f6a3 100644 --- a/drivers/i2c/busses/i2c-iop3xx.h +++ b/drivers/i2c/busses/i2c-iop3xx.h @@ -80,7 +80,7 @@ #define IOP3XX_GPOD_I2C0 0x00c0 /* clear these bits to enable ch0 */ #define IOP3XX_GPOD_I2C1 0x0030 /* clear these bits to enable ch1 */ -#define MYSAR 0x02 /* SWAG a suitable slave address */ +#define MYSAR 0 /* default slave address */ #define I2C_ERR 321 #define I2C_ERR_BERR (I2C_ERR+0) diff --git a/drivers/i2c/busses/i2c-powermac.c b/drivers/i2c/busses/i2c-powermac.c index e8a6de5a151..d658d910795 100644 --- a/drivers/i2c/busses/i2c-powermac.c +++ b/drivers/i2c/busses/i2c-powermac.c @@ -148,8 +148,6 @@ static int i2c_powermac_master_xfer( struct i2c_adapter *adap, int read; int addrdir; - if (num != 1) - return -EINVAL; if (msgs->flags & I2C_M_TEN) return -EINVAL; read = (msgs->flags & I2C_M_RD) != 0; @@ -166,7 +164,7 @@ static int i2c_powermac_master_xfer( struct i2c_adapter *adap, rc = pmac_i2c_xfer(bus, addrdir, 0, 0, msgs->buf, msgs->len); bail: pmac_i2c_close(bus); - return rc < 0 ? rc : msgs->len; + return rc < 0 ? rc : 1; } static u32 i2c_powermac_func(struct i2c_adapter * adapter) diff --git a/drivers/i2c/busses/scx200_acb.c b/drivers/i2c/busses/scx200_acb.c index 22a3eda0416..ced309ff056 100644 --- a/drivers/i2c/busses/scx200_acb.c +++ b/drivers/i2c/busses/scx200_acb.c @@ -184,21 +184,21 @@ static void scx200_acb_machine(struct scx200_acb_iface *iface, u8 status) break; case state_read: - /* Set ACK if receiving the last byte */ - if (iface->len == 1) + /* Set ACK if _next_ byte will be the last one */ + if (iface->len == 2) outb(inb(ACBCTL1) | ACBCTL1_ACK, ACBCTL1); else outb(inb(ACBCTL1) & ~ACBCTL1_ACK, ACBCTL1); - *iface->ptr++ = inb(ACBSDA); - --iface->len; - - if (iface->len == 0) { + if (iface->len == 1) { iface->result = 0; iface->state = state_idle; outb(inb(ACBCTL1) | ACBCTL1_STOP, ACBCTL1); } + *iface->ptr++ = inb(ACBSDA); + --iface->len; + break; case state_write: @@ -307,8 +307,12 @@ static s32 scx200_acb_smbus_xfer(struct i2c_adapter *adapter, buffer = (u8 *)&cur_word; break; - case I2C_SMBUS_BLOCK_DATA: + case I2C_SMBUS_I2C_BLOCK_DATA: + if (rw == I2C_SMBUS_READ) + data->block[0] = I2C_SMBUS_BLOCK_MAX; /* For now */ len = data->block[0]; + if (len == 0 || len > I2C_SMBUS_BLOCK_MAX) + return -EINVAL; buffer = &data->block[1]; break; @@ -372,7 +376,7 @@ static u32 scx200_acb_func(struct i2c_adapter *adapter) { return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | - I2C_FUNC_SMBUS_BLOCK_DATA; + I2C_FUNC_SMBUS_I2C_BLOCK; } /* For now, we only handle combined mode (smbus) */ |