summaryrefslogtreecommitdiffstats
path: root/drivers/i2c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/i2c')
-rw-r--r--drivers/i2c/busses/Kconfig22
-rw-r--r--drivers/i2c/busses/Makefile1
-rw-r--r--drivers/i2c/busses/i2c-i801.c154
-rw-r--r--drivers/i2c/busses/i2c-nforce2.c38
-rw-r--r--drivers/i2c/busses/i2c-ocores.c341
-rw-r--r--drivers/i2c/busses/i2c-piix4.c33
-rw-r--r--drivers/i2c/busses/scx200_acb.c202
-rw-r--r--drivers/i2c/chips/Kconfig8
-rw-r--r--drivers/i2c/chips/m41t00.c346
-rw-r--r--drivers/i2c/i2c-core.c4
-rw-r--r--drivers/i2c/i2c-dev.c5
11 files changed, 875 insertions, 279 deletions
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index d6d44946a28..f7af7e9bb7d 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -163,7 +163,7 @@ config I2C_PXA_SLAVE
I2C bus.
config I2C_PIIX4
- tristate "Intel PIIX4"
+ tristate "Intel PIIX4 and compatible (ATI/Serverworks/Broadcom/SMSC)"
depends on I2C && PCI
help
If you say yes to this option, support will be included for the Intel
@@ -172,6 +172,9 @@ config I2C_PIIX4
of Broadcom):
Intel PIIX4
Intel 440MX
+ ATI IXP200
+ ATI IXP300
+ ATI IXP400
Serverworks OSB4
Serverworks CSB5
Serverworks CSB6
@@ -273,6 +276,17 @@ config I2C_NFORCE2
This driver can also be built as a module. If so, the module
will be called i2c-nforce2.
+config I2C_OCORES
+ tristate "OpenCores I2C Controller"
+ depends on I2C && EXPERIMENTAL
+ help
+ If you say yes to this option, support will be included for the
+ OpenCores I2C controller. For details see
+ http://www.opencores.org/projects.cgi/web/i2c/overview
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-ocores.
+
config I2C_PARPORT
tristate "Parallel port adapter"
depends on I2C && PARPORT
@@ -500,6 +514,7 @@ config I2C_PCA_ISA
tristate "PCA9564 on an ISA bus"
depends on I2C
select I2C_ALGOPCA
+ default n
help
This driver supports ISA boards using the Philips PCA 9564
Parallel bus to I2C bus controller
@@ -507,6 +522,11 @@ config I2C_PCA_ISA
This driver can also be built as a module. If so, the module
will be called i2c-pca-isa.
+ This device is almost undetectable and using this driver on a
+ system which doesn't have this device will result in long
+ delays when I2C/SMBus chip drivers are loaded (e.g. at boot
+ time). If unsure, say N.
+
config I2C_MV64XXX
tristate "Marvell mv64xxx I2C Controller"
depends on I2C && MV64X60 && EXPERIMENTAL
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index b44831dff68..ac56df53155 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -23,6 +23,7 @@ obj-$(CONFIG_I2C_POWERMAC) += i2c-powermac.o
obj-$(CONFIG_I2C_MPC) += i2c-mpc.o
obj-$(CONFIG_I2C_MV64XXX) += i2c-mv64xxx.o
obj-$(CONFIG_I2C_NFORCE2) += i2c-nforce2.o
+obj-$(CONFIG_I2C_OCORES) += i2c-ocores.o
obj-$(CONFIG_I2C_PARPORT) += i2c-parport.o
obj-$(CONFIG_I2C_PARPORT_LIGHT) += i2c-parport-light.o
obj-$(CONFIG_I2C_PCA_ISA) += i2c-pca-isa.o
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index dfca7493362..3e0d04d5a80 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -1,5 +1,5 @@
/*
- i801.c - Part of lm_sensors, Linux kernel modules for hardware
+ i2c-i801.c - Part of lm_sensors, Linux kernel modules for hardware
monitoring
Copyright (c) 1998 - 2002 Frodo Looijaard <frodol@dds.nl>,
Philip Edelbrock <phil@netroedge.com>, and Mark D. Studebaker
@@ -36,7 +36,7 @@
This driver supports several versions of Intel's I/O Controller Hubs (ICH).
For SMBus support, they are similar to the PIIX4 and are part
of Intel's '810' and other chipsets.
- See the doc/busses/i2c-i801 file for details.
+ See the file Documentation/i2c/busses/i2c-i801 for details.
I2C Block Read and Process Call are not supported.
*/
@@ -66,9 +66,8 @@
#define SMBAUXCTL (13 + i801_smba) /* ICH4 only */
/* PCI Address Constants */
-#define SMBBA 0x020
+#define SMBBAR 4
#define SMBHSTCFG 0x040
-#define SMBREV 0x008
/* Host configuration bits for SMBHSTCFG */
#define SMBHSTCFG_HST_EN 1
@@ -92,92 +91,16 @@
#define I801_START 0x40
#define I801_PEC_EN 0x80 /* ICH4 only */
-/* insmod parameters */
-
-/* If force_addr is set to anything different from 0, we forcibly enable
- the I801 at the given address. VERY DANGEROUS! */
-static u16 force_addr;
-module_param(force_addr, ushort, 0);
-MODULE_PARM_DESC(force_addr,
- "Forcibly enable the I801 at the given address. "
- "EXTREMELY DANGEROUS!");
static int i801_transaction(void);
static int i801_block_transaction(union i2c_smbus_data *data, char read_write,
int command, int hwpec);
-static unsigned short i801_smba;
+static unsigned long i801_smba;
static struct pci_driver i801_driver;
static struct pci_dev *I801_dev;
static int isich4;
-static int i801_setup(struct pci_dev *dev)
-{
- int error_return = 0;
- unsigned char temp;
-
- /* Note: we keep on searching until we have found 'function 3' */
- if(PCI_FUNC(dev->devfn) != 3)
- return -ENODEV;
-
- I801_dev = dev;
- if ((dev->device == PCI_DEVICE_ID_INTEL_82801DB_3) ||
- (dev->device == PCI_DEVICE_ID_INTEL_82801EB_3) ||
- (dev->device == PCI_DEVICE_ID_INTEL_ESB_4))
- isich4 = 1;
- else
- isich4 = 0;
-
- /* Determine the address of the SMBus areas */
- if (force_addr) {
- i801_smba = force_addr & 0xfff0;
- } else {
- pci_read_config_word(I801_dev, SMBBA, &i801_smba);
- i801_smba &= 0xfff0;
- if(i801_smba == 0) {
- dev_err(&dev->dev, "SMB base address uninitialized "
- "- upgrade BIOS or use force_addr=0xaddr\n");
- return -ENODEV;
- }
- }
-
- if (!request_region(i801_smba, (isich4 ? 16 : 8), i801_driver.name)) {
- dev_err(&dev->dev, "I801_smb region 0x%x already in use!\n",
- i801_smba);
- error_return = -EBUSY;
- goto END;
- }
-
- pci_read_config_byte(I801_dev, SMBHSTCFG, &temp);
- temp &= ~SMBHSTCFG_I2C_EN; /* SMBus timing */
- pci_write_config_byte(I801_dev, SMBHSTCFG, temp);
-
- /* If force_addr is set, we program the new address here. Just to make
- sure, we disable the device first. */
- if (force_addr) {
- pci_write_config_byte(I801_dev, SMBHSTCFG, temp & 0xfe);
- pci_write_config_word(I801_dev, SMBBA, i801_smba);
- pci_write_config_byte(I801_dev, SMBHSTCFG, temp | 0x01);
- dev_warn(&dev->dev, "WARNING: I801 SMBus interface set to "
- "new address %04x!\n", i801_smba);
- } else if ((temp & 1) == 0) {
- pci_write_config_byte(I801_dev, SMBHSTCFG, temp | 1);
- dev_warn(&dev->dev, "enabling SMBus device\n");
- }
-
- if (temp & 0x02)
- dev_dbg(&dev->dev, "I801 using Interrupt SMI# for SMBus.\n");
- else
- dev_dbg(&dev->dev, "I801 using PCI Interrupt for SMBus.\n");
-
- pci_read_config_byte(I801_dev, SMBREV, &temp);
- dev_dbg(&dev->dev, "SMBREV = 0x%X\n", temp);
- dev_dbg(&dev->dev, "I801_smba = 0x%X\n", i801_smba);
-
-END:
- return error_return;
-}
-
static int i801_transaction(void)
{
int temp;
@@ -334,8 +257,8 @@ static int i801_block_transaction(union i2c_smbus_data *data, char read_write,
/* We will always wait for a fraction of a second! */
timeout = 0;
do {
- temp = inb_p(SMBHSTSTS);
msleep(1);
+ temp = inb_p(SMBHSTSTS);
}
while ((!(temp & 0x80))
&& (timeout++ < MAX_TIMEOUT));
@@ -393,8 +316,8 @@ static int i801_block_transaction(union i2c_smbus_data *data, char read_write,
/* wait for INTR bit as advised by Intel */
timeout = 0;
do {
- temp = inb_p(SMBHSTSTS);
msleep(1);
+ temp = inb_p(SMBHSTSTS);
} while ((!(temp & 0x02))
&& (timeout++ < MAX_TIMEOUT));
@@ -541,25 +464,76 @@ MODULE_DEVICE_TABLE (pci, i801_ids);
static int __devinit i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
{
+ unsigned char temp;
+ int err;
+
+ I801_dev = dev;
+ if ((dev->device == PCI_DEVICE_ID_INTEL_82801DB_3) ||
+ (dev->device == PCI_DEVICE_ID_INTEL_82801EB_3) ||
+ (dev->device == PCI_DEVICE_ID_INTEL_ESB_4))
+ isich4 = 1;
+ else
+ isich4 = 0;
+
+ err = pci_enable_device(dev);
+ if (err) {
+ dev_err(&dev->dev, "Failed to enable SMBus PCI device (%d)\n",
+ err);
+ goto exit;
+ }
+
+ /* Determine the address of the SMBus area */
+ i801_smba = pci_resource_start(dev, SMBBAR);
+ if (!i801_smba) {
+ dev_err(&dev->dev, "SMBus base address uninitialized, "
+ "upgrade BIOS\n");
+ err = -ENODEV;
+ goto exit_disable;
+ }
+
+ err = pci_request_region(dev, SMBBAR, i801_driver.name);
+ if (err) {
+ dev_err(&dev->dev, "Failed to request SMBus region "
+ "0x%lx-0x%lx\n", i801_smba,
+ pci_resource_end(dev, SMBBAR));
+ goto exit_disable;
+ }
- if (i801_setup(dev)) {
- dev_warn(&dev->dev,
- "I801 not detected, module not inserted.\n");
- return -ENODEV;
+ pci_read_config_byte(I801_dev, SMBHSTCFG, &temp);
+ temp &= ~SMBHSTCFG_I2C_EN; /* SMBus timing */
+ if (!(temp & SMBHSTCFG_HST_EN)) {
+ dev_info(&dev->dev, "Enabling SMBus device\n");
+ temp |= SMBHSTCFG_HST_EN;
}
+ pci_write_config_byte(I801_dev, SMBHSTCFG, temp);
+
+ if (temp & SMBHSTCFG_SMB_SMI_EN)
+ dev_dbg(&dev->dev, "SMBus using interrupt SMI#\n");
+ else
+ dev_dbg(&dev->dev, "SMBus using PCI Interrupt\n");
/* set up the driverfs linkage to our parent device */
i801_adapter.dev.parent = &dev->dev;
snprintf(i801_adapter.name, I2C_NAME_SIZE,
- "SMBus I801 adapter at %04x", i801_smba);
- return i2c_add_adapter(&i801_adapter);
+ "SMBus I801 adapter at %04lx", i801_smba);
+ err = i2c_add_adapter(&i801_adapter);
+ if (err) {
+ dev_err(&dev->dev, "Failed to add SMBus adapter\n");
+ goto exit_disable;
+ }
+
+exit_disable:
+ pci_disable_device(dev);
+exit:
+ return err;
}
static void __devexit i801_remove(struct pci_dev *dev)
{
i2c_del_adapter(&i801_adapter);
- release_region(i801_smba, (isich4 ? 16 : 8));
+ pci_release_region(dev, SMBBAR);
+ pci_disable_device(dev);
}
static struct pci_driver i801_driver = {
diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c
index 2d80eb26f68..604b49e22df 100644
--- a/drivers/i2c/busses/i2c-nforce2.c
+++ b/drivers/i2c/busses/i2c-nforce2.c
@@ -31,6 +31,8 @@
nForce3 250Gb MCP 00E4
nForce4 MCP 0052
nForce4 MCP-04 0034
+ nForce4 MCP51 0264
+ nForce4 MCP55 0368
This driver supports the 2 SMBuses that are included in the MCP of the
nForce2/3/4 chipsets.
@@ -64,6 +66,7 @@ struct nforce2_smbus {
/*
* nVidia nForce2 SMBus control register definitions
+ * (Newer incarnations use standard BARs 4 and 5 instead)
*/
#define NFORCE_PCI_SMB1 0x50
#define NFORCE_PCI_SMB2 0x54
@@ -259,6 +262,8 @@ static struct pci_device_id nforce2_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE4_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SMBUS) },
{ 0 }
};
@@ -266,19 +271,29 @@ static struct pci_device_id nforce2_ids[] = {
MODULE_DEVICE_TABLE (pci, nforce2_ids);
-static int __devinit nforce2_probe_smb (struct pci_dev *dev, int reg,
- struct nforce2_smbus *smbus, char *name)
+static int __devinit nforce2_probe_smb (struct pci_dev *dev, int bar,
+ int alt_reg, struct nforce2_smbus *smbus, const char *name)
{
- u16 iobase;
int error;
- if (pci_read_config_word(dev, reg, &iobase) != PCIBIOS_SUCCESSFUL) {
- dev_err(&smbus->adapter.dev, "Error reading PCI config for %s\n", name);
- return -1;
+ smbus->base = pci_resource_start(dev, bar);
+ if (smbus->base) {
+ smbus->size = pci_resource_len(dev, bar);
+ } else {
+ /* Older incarnations of the device used non-standard BARs */
+ u16 iobase;
+
+ if (pci_read_config_word(dev, alt_reg, &iobase)
+ != PCIBIOS_SUCCESSFUL) {
+ dev_err(&dev->dev, "Error reading PCI config for %s\n",
+ name);
+ return -1;
+ }
+
+ smbus->base = iobase & PCI_BASE_ADDRESS_IO_MASK;
+ smbus->size = 8;
}
- smbus->dev = dev;
- smbus->base = iobase & 0xfffc;
- smbus->size = 8;
+ smbus->dev = dev;
if (!request_region(smbus->base, smbus->size, nforce2_driver.name)) {
dev_err(&smbus->adapter.dev, "Error requesting region %02x .. %02X for %s\n",
@@ -313,12 +328,13 @@ static int __devinit nforce2_probe(struct pci_dev *dev, const struct pci_device_
pci_set_drvdata(dev, smbuses);
/* SMBus adapter 1 */
- res1 = nforce2_probe_smb (dev, NFORCE_PCI_SMB1, &smbuses[0], "SMB1");
+ res1 = nforce2_probe_smb(dev, 4, NFORCE_PCI_SMB1, &smbuses[0], "SMB1");
if (res1 < 0) {
dev_err(&dev->dev, "Error probing SMB1.\n");
smbuses[0].base = 0; /* to have a check value */
}
- res2 = nforce2_probe_smb (dev, NFORCE_PCI_SMB2, &smbuses[1], "SMB2");
+ /* SMBus adapter 2 */
+ res2 = nforce2_probe_smb(dev, 5, NFORCE_PCI_SMB2, &smbuses[1], "SMB2");
if (res2 < 0) {
dev_err(&dev->dev, "Error probing SMB2.\n");
smbuses[1].base = 0; /* to have a check value */
diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c
new file mode 100644
index 00000000000..592824087c4
--- /dev/null
+++ b/drivers/i2c/busses/i2c-ocores.c
@@ -0,0 +1,341 @@
+/*
+ * i2c-ocores.c: I2C bus driver for OpenCores I2C controller
+ * (http://www.opencores.org/projects.cgi/web/i2c/overview).
+ *
+ * Peter Korsgaard <jacmet@sunsite.dk>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/wait.h>
+#include <linux/i2c-ocores.h>
+#include <asm/io.h>
+
+struct ocores_i2c {
+ void __iomem *base;
+ int regstep;
+ wait_queue_head_t wait;
+ struct i2c_adapter adap;
+ struct i2c_msg *msg;
+ int pos;
+ int nmsgs;
+ int state; /* see STATE_ */
+};
+
+/* registers */
+#define OCI2C_PRELOW 0
+#define OCI2C_PREHIGH 1
+#define OCI2C_CONTROL 2
+#define OCI2C_DATA 3
+#define OCI2C_CMD 4 /* write only */
+#define OCI2C_STATUS 4 /* read only, same address as OCI2C_CMD */
+
+#define OCI2C_CTRL_IEN 0x40
+#define OCI2C_CTRL_EN 0x80
+
+#define OCI2C_CMD_START 0x91
+#define OCI2C_CMD_STOP 0x41
+#define OCI2C_CMD_READ 0x21
+#define OCI2C_CMD_WRITE 0x11
+#define OCI2C_CMD_READ_ACK 0x21
+#define OCI2C_CMD_READ_NACK 0x29
+#define OCI2C_CMD_IACK 0x01
+
+#define OCI2C_STAT_IF 0x01
+#define OCI2C_STAT_TIP 0x02
+#define OCI2C_STAT_ARBLOST 0x20
+#define OCI2C_STAT_BUSY 0x40
+#define OCI2C_STAT_NACK 0x80
+
+#define STATE_DONE 0
+#define STATE_START 1
+#define STATE_WRITE 2
+#define STATE_READ 3
+#define STATE_ERROR 4
+
+static inline void oc_setreg(struct ocores_i2c *i2c, int reg, u8 value)
+{
+ iowrite8(value, i2c->base + reg * i2c->regstep);
+}
+
+static inline u8 oc_getreg(struct ocores_i2c *i2c, int reg)
+{
+ return ioread8(i2c->base + reg * i2c->regstep);
+}
+
+static void ocores_process(struct ocores_i2c *i2c)
+{
+ struct i2c_msg *msg = i2c->msg;
+ u8 stat = oc_getreg(i2c, OCI2C_STATUS);
+
+ if ((i2c->state == STATE_DONE) || (i2c->state == STATE_ERROR)) {
+ /* stop has been sent */
+ oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_IACK);
+ wake_up(&i2c->wait);
+ return;
+ }
+
+ /* error? */
+ if (stat & OCI2C_STAT_ARBLOST) {
+ i2c->state = STATE_ERROR;
+ oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_STOP);
+ return;
+ }
+
+ if ((i2c->state == STATE_START) || (i2c->state == STATE_WRITE)) {
+ i2c->state =
+ (msg->flags & I2C_M_RD) ? STATE_READ : STATE_WRITE;
+
+ if (stat & OCI2C_STAT_NACK) {
+ i2c->state = STATE_ERROR;
+ oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_STOP);
+ return;
+ }
+ } else
+ msg->buf[i2c->pos++] = oc_getreg(i2c, OCI2C_DATA);
+
+ /* end of msg? */
+ if (i2c->pos == msg->len) {
+ i2c->nmsgs--;
+ i2c->msg++;
+ i2c->pos = 0;
+ msg = i2c->msg;
+
+ if (i2c->nmsgs) { /* end? */
+ /* send start? */
+ if (!(msg->flags & I2C_M_NOSTART)) {
+ u8 addr = (msg->addr << 1);
+
+ if (msg->flags & I2C_M_RD)
+ addr |= 1;
+
+ i2c->state = STATE_START;
+
+ oc_setreg(i2c, OCI2C_DATA, addr);
+ oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_START);
+ return;
+ } else
+ i2c->state = (msg->flags & I2C_M_RD)
+ ? STATE_READ : STATE_WRITE;
+ } else {
+ i2c->state = STATE_DONE;
+ oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_STOP);
+ return;
+ }
+ }
+
+ if (i2c->state == STATE_READ) {
+ oc_setreg(i2c, OCI2C_CMD, i2c->pos == (msg->len-1) ?
+ OCI2C_CMD_READ_NACK : OCI2C_CMD_READ_ACK);
+ } else {
+ oc_setreg(i2c, OCI2C_DATA, msg->buf[i2c->pos++]);
+ oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_WRITE);
+ }
+}
+
+static irqreturn_t ocores_isr(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct ocores_i2c *i2c = dev_id;
+
+ ocores_process(i2c);
+
+ return IRQ_HANDLED;
+}
+
+static int ocores_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
+{
+ struct ocores_i2c *i2c = i2c_get_adapdata(adap);
+
+ i2c->msg = msgs;
+ i2c->pos = 0;
+ i2c->nmsgs = num;
+ i2c->state = STATE_START;
+
+ oc_setreg(i2c, OCI2C_DATA,
+ (i2c->msg->addr << 1) |
+ ((i2c->msg->flags & I2C_M_RD) ? 1:0));
+
+ oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_START);
+
+ if (wait_event_timeout(i2c->wait, (i2c->state == STATE_ERROR) ||
+ (i2c->state == STATE_DONE), HZ))
+ return (i2c->state == STATE_DONE) ? num : -EIO;
+ else
+ return -ETIMEDOUT;
+}
+
+static void ocores_init(struct ocores_i2c *i2c,
+ struct ocores_i2c_platform_data *pdata)
+{
+ int prescale;
+ u8 ctrl = oc_getreg(i2c, OCI2C_CONTROL);
+
+ /* make sure the device is disabled */
+ oc_setreg(i2c, OCI2C_CONTROL, ctrl & ~(OCI2C_CTRL_EN|OCI2C_CTRL_IEN));
+
+ prescale = (pdata->clock_khz / (5*100)) - 1;
+ oc_setreg(i2c, OCI2C_PRELOW, prescale & 0xff);
+ oc_setreg(i2c, OCI2C_PREHIGH, prescale >> 8);
+
+ /* Init the device */
+ oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_IACK);
+ oc_setreg(i2c, OCI2C_CONTROL, ctrl | OCI2C_CTRL_IEN | OCI2C_CTRL_EN);
+}
+
+
+static u32 ocores_func(struct i2c_adapter *adap)
+{
+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static struct i2c_algorithm ocores_algorithm = {
+ .master_xfer = ocores_xfer,
+ .functionality = ocores_func,
+};
+
+static struct i2c_adapter ocores_adapter = {
+ .owner = THIS_MODULE,
+ .name = "i2c-ocores",
+ .class = I2C_CLASS_HWMON,
+ .algo = &ocores_algorithm,
+};
+
+
+static int __devinit ocores_i2c_probe(struct platform_device *pdev)
+{
+ struct ocores_i2c *i2c;
+ struct ocores_i2c_platform_data *pdata;
+ struct resource *res, *res2;
+ int ret;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -ENODEV;
+
+ res2 = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (!res2)
+ return -ENODEV;
+
+ pdata = (struct ocores_i2c_platform_data*) pdev->dev.platform_data;
+ if (!pdata)
+ return -ENODEV;
+
+ i2c = kzalloc(sizeof(*i2c), GFP_KERNEL);
+ if (!i2c)
+ return -ENOMEM;
+
+ if (!request_mem_region(res->start, res->end - res->start + 1,
+ pdev->name)) {
+ dev_err(&pdev->dev, "Memory region busy\n");
+ ret = -EBUSY;
+ goto request_mem_failed;
+ }
+
+ i2c->base = ioremap(res->start, res->end - res->start + 1);
+ if (!i2c->base) {
+ dev_err(&pdev->dev, "Unable to map registers\n");
+ ret = -EIO;
+ goto map_failed;
+ }
+
+ i2c->regstep = pdata->regstep;
+ ocores_init(i2c, pdata);
+
+ init_waitqueue_head(&i2c->wait);
+ ret = request_irq(res2->start, ocores_isr, 0, pdev->name, i2c);
+ if (ret) {
+ dev_err(&pdev->dev, "Cannot claim IRQ\n");
+ goto request_irq_failed;
+ }
+
+ /* hook up driver to tree */
+ platform_set_drvdata(pdev, i2c);
+ i2c->adap = ocores_adapter;
+ i2c_set_adapdata(&i2c->adap, i2c);
+ i2c->adap.dev.parent = &pdev->dev;
+
+ /* add i2c adapter to i2c tree */
+ ret = i2c_add_adapter(&i2c->adap);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to add adapter\n");
+ goto add_adapter_failed;
+ }
+
+ return 0;
+
+add_adapter_failed:
+ free_irq(res2->start, i2c);
+request_irq_failed:
+ iounmap(i2c->base);
+map_failed:
+ release_mem_region(res->start, res->end - res->start + 1);
+request_mem_failed:
+ kfree(i2c);
+
+ return ret;
+}
+
+static int __devexit ocores_i2c_remove(struct platform_device* pdev)
+{
+ struct ocores_i2c *i2c = platform_get_drvdata(pdev);
+ struct resource *res;
+
+ /* disable i2c logic */
+ oc_setreg(i2c, OCI2C_CONTROL, oc_getreg(i2c, OCI2C_CONTROL)
+ & ~(OCI2C_CTRL_EN|OCI2C_CTRL_IEN));
+
+ /* remove adapter & data */
+ i2c_del_adapter(&i2c->adap);
+ platform_set_drvdata(pdev, NULL);
+
+ res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (res)
+ free_irq(res->start, i2c);
+
+ iounmap(i2c->base);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (res)
+ release_mem_region(res->start, res->end - res->start + 1);
+
+ kfree(i2c);
+
+ return 0;
+}
+
+static struct platform_driver ocores_i2c_driver = {
+ .probe = ocores_i2c_probe,
+ .remove = __devexit_p(ocores_i2c_remove),
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "ocores-i2c",
+ },
+};
+
+static int __init ocores_i2c_init(void)
+{
+ return platform_driver_register(&ocores_i2c_driver);
+}
+
+static void __exit ocores_i2c_exit(void)
+{
+ platform_driver_unregister(&ocores_i2c_driver);
+}
+
+module_init(ocores_i2c_init);
+module_exit(ocores_i2c_exit);
+
+MODULE_AUTHOR("Peter Korsgaard <jacmet@sunsite.dk>");
+MODULE_DESCRIPTION("OpenCores I2C bus driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
index d9c7c00e71f..8f2f65b793b 100644
--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -102,13 +102,6 @@ MODULE_PARM_DESC(force_addr,
"Forcibly enable the PIIX4 at the given address. "
"EXTREMELY DANGEROUS!");
-/* If fix_hstcfg is set to anything different from 0, we reset one of the
- registers to be a valid value. */
-static int fix_hstcfg;
-module_param (fix_hstcfg, int, 0);
-MODULE_PARM_DESC(fix_hstcfg,
- "Fix config register. Needed on some boards (Force CPCI735).");
-
static int piix4_transaction(void);
static unsigned short piix4_smba;
@@ -137,7 +130,7 @@ static int __devinit piix4_setup(struct pci_dev *PIIX4_dev,
/* Don't access SMBus on IBM systems which get corrupted eeproms */
if (dmi_check_system(piix4_dmi_table) &&
PIIX4_dev->vendor == PCI_VENDOR_ID_INTEL) {
- dev_err(&PIIX4_dev->dev, "IBM Laptop detected; this module "
+ dev_err(&PIIX4_dev->dev, "IBM system detected; this module "
"may corrupt your serial eeprom! Refusing to load "
"module!\n");
return -EPERM;
@@ -166,22 +159,6 @@ static int __devinit piix4_setup(struct pci_dev *PIIX4_dev,
pci_read_config_byte(PIIX4_dev, SMBHSTCFG, &temp);
- /* Some BIOS will set up the chipset incorrectly and leave a register
- in an undefined state (causing I2C to act very strangely). */
- if (temp & 0x02) {
- if (fix_hstcfg) {
- dev_info(&PIIX4_dev->dev, "Working around buggy BIOS "
- "(I2C)\n");
- temp &= 0xfd;
- pci_write_config_byte(PIIX4_dev, SMBHSTCFG, temp);
- } else {
- dev_info(&PIIX4_dev->dev, "Unusual config register "
- "value\n");
- dev_info(&PIIX4_dev->dev, "Try using fix_hstcfg=1 if "
- "you experience problems\n");
- }
- }
-
/* If force_addr is set, we program the new address here. Just to make
sure, we disable the PIIX4 first. */
if (force_addr) {
@@ -214,7 +191,7 @@ static int __devinit piix4_setup(struct pci_dev *PIIX4_dev,
}
}
- if ((temp & 0x0E) == 8)
+ if (((temp & 0x0E) == 8) || ((temp & 0x0E) == 2))
dev_dbg(&PIIX4_dev->dev, "Using Interrupt 9 for SMBus.\n");
else if ((temp & 0x0E) == 0)
dev_dbg(&PIIX4_dev->dev, "Using Interrupt SMI# for SMBus.\n");
@@ -413,6 +390,12 @@ static struct i2c_adapter piix4_adapter = {
static struct pci_device_id piix4_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3),
.driver_data = 3 },
+ { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP200_SMBUS),
+ .driver_data = 0 },
+ { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP300_SMBUS),
+ .driver_data = 0 },
+ { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_SMBUS),
+ .driver_data = 0 },
{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_OSB4),
.driver_data = 0 },
{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5),
diff --git a/drivers/i2c/busses/scx200_acb.c b/drivers/i2c/busses/scx200_acb.c
index 766cc969c4d..22a3eda0416 100644
--- a/drivers/i2c/busses/scx200_acb.c
+++ b/drivers/i2c/busses/scx200_acb.c
@@ -33,7 +33,6 @@
#include <linux/delay.h>
#include <linux/mutex.h>
#include <asm/io.h>
-#include <asm/msr.h>
#include <linux/scx200.h>
@@ -85,6 +84,10 @@ struct scx200_acb_iface {
u8 *ptr;
char needs_reset;
unsigned len;
+
+ /* PCI device info */
+ struct pci_dev *pdev;
+ int bar;
};
/* Register Definitions */
@@ -381,7 +384,7 @@ static struct i2c_algorithm scx200_acb_algorithm = {
static struct scx200_acb_iface *scx200_acb_list;
static DECLARE_MUTEX(scx200_acb_list_mutex);
-static int scx200_acb_probe(struct scx200_acb_iface *iface)
+static __init int scx200_acb_probe(struct scx200_acb_iface *iface)
{
u8 val;
@@ -417,17 +420,16 @@ static int scx200_acb_probe(struct scx200_acb_iface *iface)
return 0;
}
-static int __init scx200_acb_create(const char *text, int base, int index)
+static __init struct scx200_acb_iface *scx200_create_iface(const char *text,
+ int index)
{
struct scx200_acb_iface *iface;
struct i2c_adapter *adapter;
- int rc;
iface = kzalloc(sizeof(*iface), GFP_KERNEL);
if (!iface) {
printk(KERN_ERR NAME ": can't allocate memory\n");
- rc = -ENOMEM;
- goto errout;
+ return NULL;
}
adapter = &iface->adapter;
@@ -440,26 +442,27 @@ static int __init scx200_acb_create(const char *text, int base, int index)
mutex_init(&iface->mutex);
- if (!request_region(base, 8, adapter->name)) {
- printk(KERN_ERR NAME ": can't allocate io 0x%x-0x%x\n",
- base, base + 8-1);
- rc = -EBUSY;
- goto errout_free;
- }
- iface->base = base;
+ return iface;
+}
+
+static int __init scx200_acb_create(struct scx200_acb_iface *iface)
+{
+ struct i2c_adapter *adapter;
+ int rc;
+
+ adapter = &iface->adapter;
rc = scx200_acb_probe(iface);
if (rc) {
printk(KERN_WARNING NAME ": probe failed\n");
- goto errout_release;
+ return rc;
}
scx200_acb_reset(iface);
if (i2c_add_adapter(adapter) < 0) {
printk(KERN_ERR NAME ": failed to register\n");
- rc = -ENODEV;
- goto errout_release;
+ return -ENODEV;
}
down(&scx200_acb_list_mutex);
@@ -468,64 +471,148 @@ static int __init scx200_acb_create(const char *text, int base, int index)
up(&scx200_acb_list_mutex);
return 0;
+}
- errout_release:
- release_region(iface->base, 8);
+static __init int scx200_create_pci(const char *text, struct pci_dev *pdev,
+ int bar)
+{
+ struct scx200_acb_iface *iface;
+ int rc;
+
+ iface = scx200_create_iface(text, 0);
+
+ if (iface == NULL)
+ return -ENOMEM;
+
+ iface->pdev = pdev;
+ iface->bar = bar;
+
+ pci_enable_device_bars(iface->pdev, 1 << iface->bar);
+
+ rc = pci_request_region(iface->pdev, iface->bar, iface->adapter.name);
+
+ if (rc != 0) {
+ printk(KERN_ERR NAME ": can't allocate PCI BAR %d\n",
+ iface->bar);
+ goto errout_free;
+ }
+
+ iface->base = pci_resource_start(iface->pdev, iface->bar);
+ rc = scx200_acb_create(iface);
+
+ if (rc == 0)
+ return 0;
+
+ pci_release_region(iface->pdev, iface->bar);
+ pci_dev_put(iface->pdev);
errout_free:
kfree(iface);
- errout:
return rc;
}
-static struct pci_device_id scx200[] = {
- { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SCx200_BRIDGE) },
- { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SC1100_BRIDGE) },
- { },
-};
+static int __init scx200_create_isa(const char *text, unsigned long base,
+ int index)
+{
+ struct scx200_acb_iface *iface;
+ int rc;
+
+ iface = scx200_create_iface(text, index);
+
+ if (iface == NULL)
+ return -ENOMEM;
+
+ if (request_region(base, 8, iface->adapter.name) == 0) {
+ printk(KERN_ERR NAME ": can't allocate io 0x%lx-0x%lx\n",
+ base, base + 8 - 1);
+ rc = -EBUSY;
+ goto errout_free;
+ }
+
+ iface->base = base;
+ rc = scx200_acb_create(iface);
+
+ if (rc == 0)
+ return 0;
-static struct pci_device_id divil_pci[] = {
- { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_CS5535_ISA) },
- { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA) },
- { } /* NULL entry */
+ release_region(base, 8);
+ errout_free:
+ kfree(iface);
+ return rc;
+}
+
+/* Driver data is an index into the scx200_data array that indicates
+ * the name and the BAR where the I/O address resource is located. ISA
+ * devices are flagged with a bar value of -1 */
+
+static struct pci_device_id scx200_pci[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SCx200_BRIDGE),
+ .driver_data = 0 },
+ { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SC1100_BRIDGE),
+ .driver_data = 0 },
+ { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_CS5535_ISA),
+ .driver_data = 1 },
+ { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA),
+ .driver_data = 2 }
};
-#define MSR_LBAR_SMB 0x5140000B
+static struct {
+ const char *name;
+ int bar;
+} scx200_data[] = {
+ { "SCx200", -1 },
+ { "CS5535", 0 },
+ { "CS5536", 0 }
+};
-static __init int scx200_add_cs553x(void)
+static __init int scx200_scan_pci(void)
{
- u32 low, hi;
- u32 smb_base;
-
- /* Grab & reserve the SMB I/O range */
- rdmsr(MSR_LBAR_SMB, low, hi);
+ int data, dev;
+ int rc = -ENODEV;
+ struct pci_dev *pdev;
+
+ for(dev = 0; dev < ARRAY_SIZE(scx200_pci); dev++) {
+ pdev = pci_get_device(scx200_pci[dev].vendor,
+ scx200_pci[dev].device, NULL);
+
+ if (pdev == NULL)
+ continue;
+
+ data = scx200_pci[dev].driver_data;
+
+ /* if .bar is greater or equal to zero, this is a
+ * PCI device - otherwise, we assume
+ that the ports are ISA based
+ */
+
+ if (scx200_data[data].bar >= 0)
+ rc = scx200_create_pci(scx200_data[data].name, pdev,
+ scx200_data[data].bar);
+ else {
+ int i;
+
+ for (i = 0; i < MAX_DEVICES; ++i) {
+ if (base[i] == 0)
+ continue;
+
+ rc = scx200_create_isa(scx200_data[data].name,
+ base[i],
+ i);
+ }
+ }
- /* Check the IO mask and whether SMB is enabled */
- if (hi != 0x0000F001) {
- printk(KERN_WARNING NAME ": SMBus not enabled\n");
- return -ENODEV;
+ break;
}
- /* SMBus IO size is 8 bytes */
- smb_base = low & 0x0000FFF8;
-
- return scx200_acb_create("CS5535", smb_base, 0);
+ return rc;
}
static int __init scx200_acb_init(void)
{
- int i;
- int rc = -ENODEV;
+ int rc;
pr_debug(NAME ": NatSemi SCx200 ACCESS.bus Driver\n");
- /* Verify that this really is a SCx200 processor */
- if (pci_dev_present(scx200)) {
- for (i = 0; i < MAX_DEVICES; ++i) {
- if (base[i] > 0)
- rc = scx200_acb_create("SCx200", base[i], i);
- }
- } else if (pci_dev_present(divil_pci))
- rc = scx200_add_cs553x();
+ rc = scx200_scan_pci();
/* If at least one bus was created, init must succeed */
if (scx200_acb_list)
@@ -543,7 +630,14 @@ static void __exit scx200_acb_cleanup(void)
up(&scx200_acb_list_mutex);
i2c_del_adapter(&iface->adapter);
- release_region(iface->base, 8);
+
+ if (iface->pdev) {
+ pci_release_region(iface->pdev, iface->bar);
+ pci_dev_put(iface->pdev);
+ }
+ else
+ release_region(iface->base, 8);
+
kfree(iface);
down(&scx200_acb_list_mutex);
}
diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
index 7aa5c38f085..87ee3ce5861 100644
--- a/drivers/i2c/chips/Kconfig
+++ b/drivers/i2c/chips/Kconfig
@@ -39,6 +39,7 @@ config SENSORS_EEPROM
config SENSORS_PCF8574
tristate "Philips PCF8574 and PCF8574A"
depends on I2C && EXPERIMENTAL
+ default n
help
If you say yes here you get support for Philips PCF8574 and
PCF8574A chips.
@@ -46,6 +47,9 @@ config SENSORS_PCF8574
This driver can also be built as a module. If so, the module
will be called pcf8574.
+ These devices are hard to detect and rarely found on mainstream
+ hardware. If unsure, say N.
+
config SENSORS_PCA9539
tristate "Philips PCA9539 16-bit I/O port"
depends on I2C && EXPERIMENTAL
@@ -59,12 +63,16 @@ config SENSORS_PCA9539
config SENSORS_PCF8591
tristate "Philips PCF8591"
depends on I2C && EXPERIMENTAL
+ default n
help
If you say yes here you get support for Philips PCF8591 chips.
This driver can also be built as a module. If so, the module
will be called pcf8591.
+ These devices are hard to detect and rarely found on mainstream
+ hardware. If unsure, say N.
+
config ISP1301_OMAP
tristate "Philips ISP1301 with OMAP OTG"
depends on I2C && ARCH_OMAP_OTG
diff --git a/drivers/i2c/chips/m41t00.c b/drivers/i2c/chips/m41t00.c
index 99ab4ec3439..2dd0a34d947 100644
--- a/drivers/i2c/chips/m41t00.c
+++ b/drivers/i2c/chips/m41t00.c
@@ -1,11 +1,9 @@
/*
- * drivers/i2c/chips/m41t00.c
- *
- * I2C client/driver for the ST M41T00 Real-Time Clock chip.
+ * I2C client/driver for the ST M41T00 family of i2c rtc chips.
*
* Author: Mark A. Greer <mgreer@mvista.com>
*
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * 2005, 2006 (c) MontaVista Software, Inc. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
@@ -13,9 +11,6 @@
/*
* This i2c client/driver wedges between the drivers/char/genrtc.c RTC
* interface and the SMBus interface of the i2c subsystem.
- * It would be more efficient to use i2c msgs/i2c_transfer directly but, as
- * recommened in .../Documentation/i2c/writing-clients section
- * "Sending and receiving", using SMBus level communication is preferred.
*/
#include <linux/kernel.h>
@@ -24,56 +19,110 @@
#include <linux/i2c.h>
#include <linux/rtc.h>
#include <linux/bcd.h>
-#include <linux/mutex.h>
#include <linux/workqueue.h>
-
+#include <linux/platform_device.h>
+#include <linux/m41t00.h>
#include <asm/time.h>
#include <asm/rtc.h>
-#define M41T00_DRV_NAME "m41t00"
-
-static DEFINE_MUTEX(m41t00_mutex);
-
static struct i2c_driver m41t00_driver;
static struct i2c_client *save_client;
static unsigned short ignore[] = { I2C_CLIENT_END };
-static unsigned short normal_addr[] = { 0x68, I2C_CLIENT_END };
+static unsigned short normal_addr[] = { I2C_CLIENT_END, I2C_CLIENT_END };
static struct i2c_client_address_data addr_data = {
- .normal_i2c = normal_addr,
- .probe = ignore,
- .ignore = ignore,
+ .normal_i2c = normal_addr,
+ .probe = ignore,
+ .ignore = ignore,
+};
+
+struct m41t00_chip_info {
+ u8 type;
+ char *name;
+ u8 read_limit;
+ u8 sec; /* Offsets for chip regs */
+ u8 min;
+ u8 hour;
+ u8 day;
+ u8 mon;
+ u8 year;
+ u8 alarm_mon;
+ u8 alarm_hour;
+ u8 sqw;
+ u8 sqw_freq;
};
+static struct m41t00_chip_info m41t00_chip_info_tbl[] = {
+ {
+ .type = M41T00_TYPE_M41T00,
+ .name = "m41t00",
+ .read_limit = 5,
+ .sec = 0,
+ .min = 1,
+ .hour = 2,
+ .day = 4,
+ .mon = 5,
+ .year = 6,
+ },
+ {
+ .type = M41T00_TYPE_M41T81,
+ .name = "m41t81",
+ .read_limit = 1,
+ .sec = 1,
+ .min = 2,
+ .hour = 3,
+ .day = 5,
+ .mon = 6,
+ .year = 7,
+ .alarm_mon = 0xa,
+ .alarm_hour = 0xc,
+ .sqw = 0x13,
+ },
+ {
+ .type = M41T00_TYPE_M41T85,
+ .name = "m41t85",
+ .read_limit = 1,
+ .sec = 1,
+ .min = 2,
+ .hour = 3,
+ .day = 5,
+ .mon = 6,
+ .year = 7,
+ .alarm_mon = 0xa,
+ .alarm_hour = 0xc,
+ .sqw = 0x13,
+ },
+};
+static struct m41t00_chip_info *m41t00_chip;
+
ulong
m41t00_get_rtc_time(void)
{
- s32 sec, min, hour, day, mon, year;
- s32 sec1, min1, hour1, day1, mon1, year1;
- ulong limit = 10;
+ s32 sec, min, hour, day, mon, year;
+ s32 sec1, min1, hour1, day1, mon1, year1;
+ u8 reads = 0;
+ u8 buf[8], msgbuf[1] = { 0 }; /* offset into rtc's regs */
+ struct i2c_msg msgs[] = {
+ {
+ .addr = save_client->addr,
+ .flags = 0,
+ .len = 1,
+ .buf = msgbuf,
+ },
+ {
+ .addr = save_client->addr,
+ .flags = I2C_M_RD,
+ .len = 8,
+ .buf = buf,
+ },
+ };
sec = min = hour = day = mon = year = 0;
- sec1 = min1 = hour1 = day1 = mon1 = year1 = 0;
- mutex_lock(&m41t00_mutex);
do {
- if (((sec = i2c_smbus_read_byte_data(save_client, 0)) >= 0)
- && ((min = i2c_smbus_read_byte_data(save_client, 1))
- >= 0)
- && ((hour = i2c_smbus_read_byte_data(save_client, 2))
- >= 0)
- && ((day = i2c_smbus_read_byte_data(save_client, 4))
- >= 0)
- && ((mon = i2c_smbus_read_byte_data(save_client, 5))
- >= 0)
- && ((year = i2c_smbus_read_byte_data(save_client, 6))
- >= 0)
- && ((sec == sec1) && (min == min1) && (hour == hour1)
- && (day == day1) && (mon == mon1)
- && (year == year1)))
-
- break;
+ if (i2c_transfer(save_client->adapter, msgs, 2) < 0)
+ goto read_err;
sec1 = sec;
min1 = min;
@@ -81,69 +130,88 @@ m41t00_get_rtc_time(void)
day1 = day;
mon1 = mon;
year1 = year;
- } while (--limit > 0);
- mutex_unlock(&m41t00_mutex);
-
- if (limit == 0) {
- dev_warn(&save_client->dev,
- "m41t00: can't read rtc chip\n");
- sec = min = hour = day = mon = year = 0;
- }
-
- sec &= 0x7f;
- min &= 0x7f;
- hour &= 0x3f;
- day &= 0x3f;
- mon &= 0x1f;
- year &= 0xff;
- BCD_TO_BIN(sec);
- BCD_TO_BIN(min);
- BCD_TO_BIN(hour);
- BCD_TO_BIN(day);
- BCD_TO_BIN(mon);
- BCD_TO_BIN(year);
+ sec = buf[m41t00_chip->sec] & 0x7f;
+ min = buf[m41t00_chip->min] & 0x7f;
+ hour = buf[m41t00_chip->hour] & 0x3f;
+ day = buf[m41t00_chip->day] & 0x3f;
+ mon = buf[m41t00_chip->mon] & 0x1f;
+ year = buf[m41t00_chip->year];
+ } while ((++reads < m41t00_chip->read_limit) && ((sec != sec1)
+ || (min != min1) || (hour != hour1) || (day != day1)
+ || (mon != mon1) || (year != year1)));
+
+ if ((m41t00_chip->read_limit > 1) && ((sec != sec1) || (min != min1)
+ || (hour != hour1) || (day != day1) || (mon != mon1)
+ || (year != year1)))
+ goto read_err;
+
+ sec = BCD2BIN(sec);
+ min = BCD2BIN(min);
+ hour = BCD2BIN(hour);
+ day = BCD2BIN(day);
+ mon = BCD2BIN(mon);
+ year = BCD2BIN(year);
year += 1900;
if (year < 1970)
year += 100;
return mktime(year, mon, day, hour, min, sec);
+
+read_err:
+ dev_err(&save_client->dev, "m41t00_get_rtc_time: Read error\n");
+ return 0;
}
+EXPORT_SYMBOL_GPL(m41t00_get_rtc_time);
static void
m41t00_set(void *arg)
{
struct rtc_time tm;
- ulong nowtime = *(ulong *)arg;
+ int nowtime = *(int *)arg;
+ s32 sec, min, hour, day, mon, year;
+ u8 wbuf[9], *buf = &wbuf[1], msgbuf[1] = { 0 };
+ struct i2c_msg msgs[] = {
+ {
+ .addr = save_client->addr,
+ .flags = 0,
+ .len = 1,
+ .buf = msgbuf,
+ },
+ {
+ .addr = save_client->addr,
+ .flags = I2C_M_RD,
+ .len = 8,
+ .buf = buf,
+ },
+ };
to_tm(nowtime, &tm);
tm.tm_year = (tm.tm_year - 1900) % 100;
- BIN_TO_BCD(tm.tm_sec);
- BIN_TO_BCD(tm.tm_min);
- BIN_TO_BCD(tm.tm_hour);
- BIN_TO_BCD(tm.tm_mon);
- BIN_TO_BCD(tm.tm_mday);
- BIN_TO_BCD(tm.tm_year);
-
- mutex_lock(&m41t00_mutex);
- if ((i2c_smbus_write_byte_data(save_client, 0, tm.tm_sec & 0x7f) < 0)
- || (i2c_smbus_write_byte_data(save_client, 1, tm.tm_min & 0x7f)
- < 0)
- || (i2c_smbus_write_byte_data(save_client, 2, tm.tm_hour & 0x3f)
- < 0)
- || (i2c_smbus_write_byte_data(save_client, 4, tm.tm_mday & 0x3f)
- < 0)
- || (i2c_smbus_write_byte_data(save_client, 5, tm.tm_mon & 0x1f)
- < 0)
- || (i2c_smbus_write_byte_data(save_client, 6, tm.tm_year & 0xff)
- < 0))
-
- dev_warn(&save_client->dev,"m41t00: can't write to rtc chip\n");
-
- mutex_unlock(&m41t00_mutex);
- return;
+ sec = BIN2BCD(tm.tm_sec);
+ min = BIN2BCD(tm.tm_min);
+ hour = BIN2BCD(tm.tm_hour);
+ day = BIN2BCD(tm.tm_mday);
+ mon = BIN2BCD(tm.tm_mon);
+ year = BIN2BCD(tm.tm_year);
+
+ /* Read reg values into buf[0..7]/wbuf[1..8] */
+ if (i2c_transfer(save_client->adapter, msgs, 2) < 0) {
+ dev_err(&save_client->dev, "m41t00_set: Read error\n");
+ return;
+ }
+
+ wbuf[0] = 0; /* offset into rtc's regs */
+ buf[m41t00_chip->sec] = (buf[m41t00_chip->sec] & ~0x7f) | (sec & 0x7f);
+ buf[m41t00_chip->min] = (buf[m41t00_chip->min] & ~0x7f) | (min & 0x7f);
+ buf[m41t00_chip->hour] = (buf[m41t00_chip->hour] & ~0x3f) | (hour& 0x3f);
+ buf[m41t00_chip->day] = (buf[m41t00_chip->day] & ~0x3f) | (day & 0x3f);
+ buf[m41t00_chip->mon] = (buf[m41t00_chip->mon] & ~0x1f) | (mon & 0x1f);
+
+ if (i2c_master_send(save_client, wbuf, 9) < 0)
+ dev_err(&save_client->dev, "m41t00_set: Write error\n");
}
static ulong new_time;
@@ -162,6 +230,48 @@ m41t00_set_rtc_time(ulong nowtime)
return 0;
}
+EXPORT_SYMBOL_GPL(m41t00_set_rtc_time);
+
+/*
+ *****************************************************************************
+ *
+ * platform_data Driver Interface
+ *
+ *****************************************************************************
+ */
+static int __init
+m41t00_platform_probe(struct platform_device *pdev)
+{
+ struct m41t00_platform_data *pdata;
+ int i;
+
+ if (pdev && (pdata = pdev->dev.platform_data)) {
+ normal_addr[0] = pdata->i2c_addr;
+
+ for (i=0; i<ARRAY_SIZE(m41t00_chip_info_tbl); i++)
+ if (m41t00_chip_info_tbl[i].type == pdata->type) {
+ m41t00_chip = &m41t00_chip_info_tbl[i];
+ m41t00_chip->sqw_freq = pdata->sqw_freq;
+ return 0;
+ }
+ }
+ return -ENODEV;
+}
+
+static int __exit
+m41t00_platform_remove(struct platform_device *pdev)
+{
+ return 0;
+}
+
+static struct platform_driver m41t00_platform_driver = {
+ .probe = m41t00_platform_probe,
+ .remove = m41t00_platform_remove,
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = M41T00_DRV_NAME,
+ },
+};
/*
*****************************************************************************
@@ -176,23 +286,71 @@ m41t00_probe(struct i2c_adapter *adap, int addr, int kind)
struct i2c_client *client;
int rc;
+ if (!i2c_check_functionality(adap, I2C_FUNC_I2C
+ | I2C_FUNC_SMBUS_BYTE_DATA))
+ return 0;
+
client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
if (!client)
return -ENOMEM;
- strncpy(client->name, M41T00_DRV_NAME, I2C_NAME_SIZE);
+ strlcpy(client->name, m41t00_chip->name, I2C_NAME_SIZE);
client->addr = addr;
client->adapter = adap;
client->driver = &m41t00_driver;
- if ((rc = i2c_attach_client(client)) != 0) {
- kfree(client);
- return rc;
+ if ((rc = i2c_attach_client(client)))
+ goto attach_err;
+
+ if (m41t00_chip->type != M41T00_TYPE_M41T00) {
+ /* If asked, disable SQW, set SQW frequency & re-enable */
+ if (m41t00_chip->sqw_freq)
+ if (((rc = i2c_smbus_read_byte_data(client,
+ m41t00_chip->alarm_mon)) < 0)
+ || ((rc = i2c_smbus_write_byte_data(client,
+ m41t00_chip->alarm_mon, rc & ~0x40)) <0)
+ || ((rc = i2c_smbus_write_byte_data(client,
+ m41t00_chip->sqw,
+ m41t00_chip->sqw_freq)) < 0)
+ || ((rc = i2c_smbus_write_byte_data(client,
+ m41t00_chip->alarm_mon, rc | 0x40)) <0))
+ goto sqw_err;
+
+ /* Make sure HT (Halt Update) bit is cleared */
+ if ((rc = i2c_smbus_read_byte_data(client,
+ m41t00_chip->alarm_hour)) < 0)
+ goto ht_err;
+
+ if (rc & 0x40)
+ if ((rc = i2c_smbus_write_byte_data(client,
+ m41t00_chip->alarm_hour, rc & ~0x40))<0)
+ goto ht_err;
}
- m41t00_wq = create_singlethread_workqueue("m41t00");
+ /* Make sure ST (stop) bit is cleared */
+ if ((rc = i2c_smbus_read_byte_data(client, m41t00_chip->sec)) < 0)
+ goto st_err;
+
+ if (rc & 0x80)
+ if ((rc = i2c_smbus_write_byte_data(client, m41t00_chip->sec,
+ rc & ~0x80)) < 0)
+ goto st_err;
+
+ m41t00_wq = create_singlethread_workqueue(m41t00_chip->name);
save_client = client;
return 0;
+
+st_err:
+ dev_err(&client->dev, "m41t00_probe: Can't clear ST bit\n");
+ goto attach_err;
+ht_err:
+ dev_err(&client->dev, "m41t00_probe: Can't clear HT bit\n");
+ goto attach_err;
+sqw_err:
+ dev_err(&client->dev, "m41t00_probe: Can't set SQW Frequency\n");
+attach_err:
+ kfree(client);
+ return rc;
}
static int
@@ -204,7 +362,7 @@ m41t00_attach(struct i2c_adapter *adap)
static int
m41t00_detach(struct i2c_client *client)
{
- int rc;
+ int rc;
if ((rc = i2c_detach_client(client)) == 0) {
kfree(client);
@@ -225,14 +383,18 @@ static struct i2c_driver m41t00_driver = {
static int __init
m41t00_init(void)
{
- return i2c_add_driver(&m41t00_driver);
+ int rc;
+
+ if (!(rc = platform_driver_register(&m41t00_platform_driver)))
+ rc = i2c_add_driver(&m41t00_driver);
+ return rc;
}
static void __exit
m41t00_exit(void)
{
i2c_del_driver(&m41t00_driver);
- return;
+ platform_driver_unregister(&m41t00_platform_driver);
}
module_init(m41t00_init);
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 45e2cdf5473..a45155f799d 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -916,7 +916,7 @@ s32 i2c_smbus_write_word_data(struct i2c_client *client, u8 command, u16 value)
}
s32 i2c_smbus_write_block_data(struct i2c_client *client, u8 command,
- u8 length, u8 *values)
+ u8 length, const u8 *values)
{
union i2c_smbus_data data;
@@ -944,7 +944,7 @@ s32 i2c_smbus_read_i2c_block_data(struct i2c_client *client, u8 command, u8 *val
}
s32 i2c_smbus_write_i2c_block_data(struct i2c_client *client, u8 command,
- u8 length, u8 *values)
+ u8 length, const u8 *values)
{
union i2c_smbus_data data;
diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c
index ed7eed388ba..58ccddd5c23 100644
--- a/drivers/i2c/i2c-dev.c
+++ b/drivers/i2c/i2c-dev.c
@@ -426,10 +426,7 @@ static int i2cdev_attach_adapter(struct i2c_adapter *adap)
/* register this i2c device with the driver core */
i2c_dev->adap = adap;
- if (adap->dev.parent == &platform_bus)
- dev = &adap->dev;
- else
- dev = adap->dev.parent;
+ dev = &adap->dev;
i2c_dev->class_dev = class_device_create(i2c_dev_class, NULL,
MKDEV(I2C_MAJOR, i2c_dev->minor),
dev, "i2c-%d", i2c_dev->minor);
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-29 17:52:59 +0000