summaryrefslogtreecommitdiffstats
path: root/drivers/i2c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/i2c')
-rw-r--r--drivers/i2c/Kconfig8
-rw-r--r--drivers/i2c/busses/Kconfig23
-rw-r--r--drivers/i2c/busses/Makefile3
-rw-r--r--drivers/i2c/busses/i2c-amd756.c2
-rw-r--r--drivers/i2c/busses/i2c-amd8111.c4
-rw-r--r--drivers/i2c/busses/i2c-i801.c4
-rw-r--r--drivers/i2c/busses/i2c-imx.c3
-rw-r--r--drivers/i2c/busses/i2c-isch.c2
-rw-r--r--drivers/i2c/busses/i2c-mv64xxx.c4
-rw-r--r--drivers/i2c/busses/i2c-piix4.c13
-rw-r--r--drivers/i2c/busses/i2c-pnx.c7
-rw-r--r--drivers/i2c/busses/i2c-scmi.c429
-rw-r--r--drivers/i2c/busses/i2c-sh_mobile.c39
-rw-r--r--drivers/i2c/busses/i2c-sis96x.c2
-rw-r--r--drivers/i2c/busses/i2c-taos-evm.c45
-rw-r--r--drivers/i2c/busses/i2c-viapro.c2
-rw-r--r--drivers/i2c/busses/scx200_acb.c6
-rw-r--r--drivers/i2c/chips/Kconfig48
-rw-r--r--drivers/i2c/chips/Makefile3
-rw-r--r--drivers/i2c/chips/pca9539.c152
-rw-r--r--drivers/i2c/chips/pcf8574.c215
-rw-r--r--drivers/i2c/chips/pcf8575.c198
-rw-r--r--drivers/i2c/chips/tsl2550.c42
-rw-r--r--drivers/i2c/i2c-core.c165
24 files changed, 674 insertions, 745 deletions
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index 711ca08ab77..d7ece131b4f 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -27,6 +27,14 @@ config I2C_BOARDINFO
boolean
default y
+config I2C_COMPAT
+ boolean "Enable compatibility bits for old user-space"
+ default y
+ help
+ Say Y here if you intend to run lm-sensors 3.1.1 or older, or any
+ other user-space package which expects i2c adapters to be class
+ devices. If you don't know, say Y.
+
config I2C_CHARDEV
tristate "I2C device interface"
help
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 8206442fbab..737335ff2b2 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -113,7 +113,7 @@ config I2C_ISCH
will be called i2c-isch.
config I2C_PIIX4
- tristate "Intel PIIX4 and compatible (ATI/Serverworks/Broadcom/SMSC)"
+ tristate "Intel PIIX4 and compatible (ATI/AMD/Serverworks/Broadcom/SMSC)"
depends on PCI
help
If you say yes to this option, support will be included for the Intel
@@ -128,6 +128,7 @@ config I2C_PIIX4
ATI SB600
ATI SB700
ATI SB800
+ AMD SB900
Serverworks OSB4
Serverworks CSB5
Serverworks CSB6
@@ -231,6 +232,22 @@ config I2C_VIAPRO
This driver can also be built as a module. If so, the module
will be called i2c-viapro.
+if ACPI
+
+comment "ACPI drivers"
+
+config I2C_SCMI
+ tristate "SMBus Control Method Interface"
+ help
+ This driver supports the SMBus Control Method Interface. It needs the
+ BIOS to declare ACPI control methods as described in the SMBus Control
+ Method Interface specification.
+
+ To compile this driver as a module, choose M here:
+ the module will be called i2c-scmi.
+
+endif # ACPI
+
comment "Mac SMBus host controller drivers"
depends on PPC_CHRP || PPC_PMAC
@@ -460,8 +477,8 @@ config I2C_PNX
will be called i2c-pnx.
config I2C_PXA
- tristate "Intel PXA2XX I2C adapter (EXPERIMENTAL)"
- depends on EXPERIMENTAL && ARCH_PXA
+ tristate "Intel PXA2XX I2C adapter"
+ depends on ARCH_PXA || ARCH_MMP
help
If you have devices in the PXA I2C bus, say yes to this option.
This driver can also be built as a module. If so, the module
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index e654263bfc0..ff937ac69f5 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -2,6 +2,9 @@
# Makefile for the i2c bus drivers.
#
+# ACPI drivers
+obj-$(CONFIG_I2C_SCMI) += i2c-scmi.o
+
# PC SMBus host controller drivers
obj-$(CONFIG_I2C_ALI1535) += i2c-ali1535.o
obj-$(CONFIG_I2C_ALI1563) += i2c-ali1563.o
diff --git a/drivers/i2c/busses/i2c-amd756.c b/drivers/i2c/busses/i2c-amd756.c
index f7d6fe9c49b..8f0b90ef8c7 100644
--- a/drivers/i2c/busses/i2c-amd756.c
+++ b/drivers/i2c/busses/i2c-amd756.c
@@ -364,7 +364,7 @@ static int __devinit amd756_probe(struct pci_dev *pdev,
error = acpi_check_region(amd756_ioport, SMB_IOSIZE,
amd756_driver.name);
if (error)
- return error;
+ return -ENODEV;
if (!request_region(amd756_ioport, SMB_IOSIZE, amd756_driver.name)) {
dev_err(&pdev->dev, "SMB region 0x%x already in use!\n",
diff --git a/drivers/i2c/busses/i2c-amd8111.c b/drivers/i2c/busses/i2c-amd8111.c
index a7c59908c45..5b4ad86ca16 100644
--- a/drivers/i2c/busses/i2c-amd8111.c
+++ b/drivers/i2c/busses/i2c-amd8111.c
@@ -376,8 +376,10 @@ static int __devinit amd8111_probe(struct pci_dev *dev,
smbus->size = pci_resource_len(dev, 0);
error = acpi_check_resource_conflict(&dev->resource[0]);
- if (error)
+ if (error) {
+ error = -ENODEV;
goto out_kfree;
+ }
if (!request_region(smbus->base, smbus->size, amd8111_driver.name)) {
error = -EBUSY;
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 9d2c5adf5d4..55edcfe5b85 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -732,8 +732,10 @@ static int __devinit i801_probe(struct pci_dev *dev, const struct pci_device_id
}
err = acpi_check_resource_conflict(&dev->resource[SMBBAR]);
- if (err)
+ if (err) {
+ err = -ENODEV;
goto exit;
+ }
err = pci_request_region(dev, SMBBAR, i801_driver.name);
if (err) {
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index 0b486a63460..4afba3ec2a6 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -609,13 +609,12 @@ static int __init i2c_adap_imx_init(void)
{
return platform_driver_probe(&i2c_imx_driver, i2c_imx_probe);
}
+subsys_initcall(i2c_adap_imx_init);
static void __exit i2c_adap_imx_exit(void)
{
platform_driver_unregister(&i2c_imx_driver);
}
-
-module_init(i2c_adap_imx_init);
module_exit(i2c_adap_imx_exit);
MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/i2c-isch.c b/drivers/i2c/busses/i2c-isch.c
index 9f6b8e0f863..dba6eb053e2 100644
--- a/drivers/i2c/busses/i2c-isch.c
+++ b/drivers/i2c/busses/i2c-isch.c
@@ -281,7 +281,7 @@ static int __devinit sch_probe(struct pci_dev *dev,
return -ENODEV;
}
if (acpi_check_region(sch_smba, SMBIOSIZE, sch_driver.name))
- return -EBUSY;
+ return -ENODEV;
if (!request_region(sch_smba, SMBIOSIZE, sch_driver.name)) {
dev_err(&dev->dev, "SMBus region 0x%x already in use!\n",
sch_smba);
diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c
index c3869d94ad4..bbab0e16663 100644
--- a/drivers/i2c/busses/i2c-mv64xxx.c
+++ b/drivers/i2c/busses/i2c-mv64xxx.c
@@ -293,13 +293,13 @@ mv64xxx_i2c_do_action(struct mv64xxx_i2c_data *drv_data)
}
}
-static int
+static irqreturn_t
mv64xxx_i2c_intr(int irq, void *dev_id)
{
struct mv64xxx_i2c_data *drv_data = dev_id;
unsigned long flags;
u32 status;
- int rc = IRQ_NONE;
+ irqreturn_t rc = IRQ_NONE;
spin_lock_irqsave(&drv_data->lock, flags);
while (readl(drv_data->reg_base + MV64XXX_I2C_REG_CONTROL) &
diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
index 0249a7d762b..d26a972aaca 100644
--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -22,6 +22,7 @@
Intel PIIX4, 440MX
Serverworks OSB4, CSB5, CSB6, HT-1000, HT-1100
ATI IXP200, IXP300, IXP400, SB600, SB700, SB800
+ AMD SB900
SMSC Victory66
Note: we assume there can only be one device, with one SMBus interface.
@@ -168,7 +169,7 @@ static int __devinit piix4_setup(struct pci_dev *PIIX4_dev,
}
if (acpi_check_region(piix4_smba, SMBIOSIZE, piix4_driver.name))
- return -EBUSY;
+ return -ENODEV;
if (!request_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) {
dev_err(&PIIX4_dev->dev, "SMBus region 0x%x already in use!\n",
@@ -259,7 +260,7 @@ static int __devinit piix4_setup_sb800(struct pci_dev *PIIX4_dev,
piix4_smba = ((smba_en_hi << 8) | smba_en_lo) & 0xffe0;
if (acpi_check_region(piix4_smba, SMBIOSIZE, piix4_driver.name))
- return -EBUSY;
+ return -ENODEV;
if (!request_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) {
dev_err(&PIIX4_dev->dev, "SMBus region 0x%x already in use!\n",
@@ -479,6 +480,7 @@ static struct pci_device_id piix4_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP300_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_SB900_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS,
PCI_DEVICE_ID_SERVERWORKS_OSB4) },
{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS,
@@ -499,9 +501,10 @@ static int __devinit piix4_probe(struct pci_dev *dev,
{
int retval;
- if ((dev->vendor == PCI_VENDOR_ID_ATI) &&
- (dev->device == PCI_DEVICE_ID_ATI_SBX00_SMBUS) &&
- (dev->revision >= 0x40))
+ if ((dev->vendor == PCI_VENDOR_ID_ATI &&
+ dev->device == PCI_DEVICE_ID_ATI_SBX00_SMBUS &&
+ dev->revision >= 0x40) ||
+ dev->vendor == PCI_VENDOR_ID_AMD)
/* base address location etc changed in SB800 */
retval = piix4_setup_sb800(dev, id);
else
diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c
index ec15cff556b..6ff6c20f1e7 100644
--- a/drivers/i2c/busses/i2c-pnx.c
+++ b/drivers/i2c/busses/i2c-pnx.c
@@ -586,7 +586,8 @@ static int __devinit i2c_pnx_probe(struct platform_device *pdev)
alg_data->mif.timer.data = (unsigned long)i2c_pnx->adapter;
/* Register I/O resource */
- if (!request_region(alg_data->base, I2C_PNX_REGION_SIZE, pdev->name)) {
+ if (!request_mem_region(alg_data->base, I2C_PNX_REGION_SIZE,
+ pdev->name)) {
dev_err(&pdev->dev,
"I/O region 0x%08x for I2C already in use.\n",
alg_data->base);
@@ -650,7 +651,7 @@ out_clock:
out_unmap:
iounmap((void *)alg_data->ioaddr);
out_release:
- release_region(alg_data->base, I2C_PNX_REGION_SIZE);
+ release_mem_region(alg_data->base, I2C_PNX_REGION_SIZE);
out_drvdata:
platform_set_drvdata(pdev, NULL);
out:
@@ -667,7 +668,7 @@ static int __devexit i2c_pnx_remove(struct platform_device *pdev)
i2c_del_adapter(adap);
i2c_pnx->set_clock_stop(pdev);
iounmap((void *)alg_data->ioaddr);
- release_region(alg_data->base, I2C_PNX_REGION_SIZE);
+ release_mem_region(alg_data->base, I2C_PNX_REGION_SIZE);
platform_set_drvdata(pdev, NULL);
return 0;
diff --git a/drivers/i2c/busses/i2c-scmi.c b/drivers/i2c/busses/i2c-scmi.c
new file mode 100644
index 00000000000..b4a55d407bf
--- /dev/null
+++ b/drivers/i2c/busses/i2c-scmi.c
@@ -0,0 +1,429 @@
+/*
+ * SMBus driver for ACPI SMBus CMI
+ *
+ * Copyright (C) 2009 Crane Cai <crane.cai@amd.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2.
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/kernel.h>
+#include <linux/stddef.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/acpi.h>
+
+#define ACPI_SMBUS_HC_CLASS "smbus"
+#define ACPI_SMBUS_HC_DEVICE_NAME "cmi"
+
+ACPI_MODULE_NAME("smbus_cmi");
+
+struct smbus_methods_t {
+ char *mt_info;
+ char *mt_sbr;
+ char *mt_sbw;
+};
+
+struct acpi_smbus_cmi {
+ acpi_handle handle;
+ struct i2c_adapter adapter;
+ u8 cap_info:1;
+ u8 cap_read:1;
+ u8 cap_write:1;
+};
+
+static const struct smbus_methods_t smbus_methods = {
+ .mt_info = "_SBI",
+ .mt_sbr = "_SBR",
+ .mt_sbw = "_SBW",
+};
+
+static const struct acpi_device_id acpi_smbus_cmi_ids[] = {
+ {"SMBUS01", 0},
+ {"", 0}
+};
+
+#define ACPI_SMBUS_STATUS_OK 0x00
+#define ACPI_SMBUS_STATUS_FAIL 0x07
+#define ACPI_SMBUS_STATUS_DNAK 0x10
+#define ACPI_SMBUS_STATUS_DERR 0x11
+#define ACPI_SMBUS_STATUS_CMD_DENY 0x12
+#define ACPI_SMBUS_STATUS_UNKNOWN 0x13
+#define ACPI_SMBUS_STATUS_ACC_DENY 0x17
+#define ACPI_SMBUS_STATUS_TIMEOUT 0x18
+#define ACPI_SMBUS_STATUS_NOTSUP 0x19
+#define ACPI_SMBUS_STATUS_BUSY 0x1a
+#define ACPI_SMBUS_STATUS_PEC 0x1f
+
+#define ACPI_SMBUS_PRTCL_WRITE 0x00
+#define ACPI_SMBUS_PRTCL_READ 0x01
+#define ACPI_SMBUS_PRTCL_QUICK 0x02
+#define ACPI_SMBUS_PRTCL_BYTE 0x04
+#define ACPI_SMBUS_PRTCL_BYTE_DATA 0x06
+#define ACPI_SMBUS_PRTCL_WORD_DATA 0x08
+#define ACPI_SMBUS_PRTCL_BLOCK_DATA 0x0a
+
+
+static int
+acpi_smbus_cmi_access(struct i2c_adapter *adap, u16 addr, unsigned short flags,
+ char read_write, u8 command, int size,
+ union i2c_smbus_data *data)
+{
+ int result = 0;
+ struct acpi_smbus_cmi *smbus_cmi = adap->algo_data;
+ unsigned char protocol;
+ acpi_status status = 0;
+ struct acpi_object_list input;
+ union acpi_object mt_params[5];
+ struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+ union acpi_object *obj;
+ union acpi_object *pkg;
+ char *method;
+ int len = 0;
+
+ dev_dbg(&adap->dev, "access size: %d %s\n", size,
+ (read_write) ? "READ" : "WRITE");
+ switch (size) {
+ case I2C_SMBUS_QUICK:
+ protocol = ACPI_SMBUS_PRTCL_QUICK;
+ command = 0;
+ if (read_write == I2C_SMBUS_WRITE) {
+ mt_params[3].type = ACPI_TYPE_INTEGER;
+ mt_params[3].integer.value = 0;
+ mt_params[4].type = ACPI_TYPE_INTEGER;
+ mt_params[4].integer.value = 0;
+ }
+ break;
+
+ case I2C_SMBUS_BYTE:
+ protocol = ACPI_SMBUS_PRTCL_BYTE;
+ if (read_write == I2C_SMBUS_WRITE) {
+ mt_params[3].type = ACPI_TYPE_INTEGER;
+ mt_params[3].integer.value = 0;
+ mt_params[4].type = ACPI_TYPE_INTEGER;
+ mt_params[4].integer.value = 0;
+ } else {
+ command = 0;
+ }
+ break;
+
+ case I2C_SMBUS_BYTE_DATA:
+ protocol = ACPI_SMBUS_PRTCL_BYTE_DATA;
+ if (read_write == I2C_SMBUS_WRITE) {
+ mt_params[3].type = ACPI_TYPE_INTEGER;
+ mt_params[3].integer.value = 1;
+ mt_params[4].type = ACPI_TYPE_INTEGER;
+ mt_params[4].integer.value = data->byte;
+ }
+ break;
+
+ case I2C_SMBUS_WORD_DATA:
+ protocol = ACPI_SMBUS_PRTCL_WORD_DATA;
+ if (read_write == I2C_SMBUS_WRITE) {
+ mt_params[3].type = ACPI_TYPE_INTEGER;
+ mt_params[3].integer.value = 2;
+ mt_params[4].type = ACPI_TYPE_INTEGER;
+ mt_params[4].integer.value = data->word;
+ }
+ break;
+
+ case I2C_SMBUS_BLOCK_DATA:
+ protocol = ACPI_SMBUS_PRTCL_BLOCK_DATA;
+ if (read_write == I2C_SMBUS_WRITE) {
+ len = data->block[0];
+ if (len == 0 || len > I2C_SMBUS_BLOCK_MAX)
+ return -EINVAL;
+ mt_params[3].type = ACPI_TYPE_INTEGER;
+ mt_params[3].integer.value = len;
+ mt_params[4].type = ACPI_TYPE_BUFFER;
+ mt_params[4].buffer.pointer = data->block + 1;
+ }
+ break;
+
+ default:
+ dev_warn(&adap->dev, "Unsupported transaction %d\n", size);
+ return -EOPNOTSUPP;
+ }
+
+ if (read_write == I2C_SMBUS_READ) {
+ protocol |= ACPI_SMBUS_PRTCL_READ;
+ method = smbus_methods.mt_sbr;
+ input.count = 3;
+ } else {
+ protocol |= ACPI_SMBUS_PRTCL_WRITE;
+ method = smbus_methods.mt_sbw;
+ input.count = 5;
+ }
+
+ input.pointer = mt_params;
+ mt_params[0].type = ACPI_TYPE_INTEGER;
+ mt_params[0].integer.value = protocol;
+ mt_params[1].type = ACPI_TYPE_INTEGER;
+ mt_params[1].integer.value = addr;
+ mt_params[2].type = ACPI_TYPE_INTEGER;
+ mt_params[2].integer.value = command;
+
+ status = acpi_evaluate_object(smbus_cmi->handle, method, &input,
+ &buffer);
+ if (ACPI_FAILURE(status)) {
+ ACPI_ERROR((AE_INFO, "Evaluating %s: %i", method, status));
+ return -EIO;
+ }
+
+ pkg = buffer.pointer;
+ if (pkg && pkg->type == ACPI_TYPE_PACKAGE)
+ obj = pkg->package.elements;
+ else {
+ ACPI_ERROR((AE_INFO, "Invalid argument type"));
+ result = -EIO;
+ goto out;
+ }
+ if (obj == NULL || obj->type != ACPI_TYPE_INTEGER) {
+ ACPI_ERROR((AE_INFO, "Invalid argument type"));
+ result = -EIO;
+ goto out;
+ }
+
+ result = obj->integer.value;
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO, "%s return status: %i\n",
+ method, result));
+
+ switch (result) {
+ case ACPI_SMBUS_STATUS_OK:
+ result = 0;
+ break;
+ case ACPI_SMBUS_STATUS_BUSY:
+ result = -EBUSY;
+ goto out;
+ case ACPI_SMBUS_STATUS_TIMEOUT:
+ result = -ETIMEDOUT;
+ goto out;
+ case ACPI_SMBUS_STATUS_DNAK:
+ result = -ENXIO;
+ goto out;
+ default:
+ result = -EIO;
+ goto out;
+ }
+
+ if (read_write == I2C_SMBUS_WRITE || size == I2C_SMBUS_QUICK)
+ goto out;
+
+ obj = pkg->package.elements + 1;
+ if (obj == NULL || obj->type != ACPI_TYPE_INTEGER) {
+ ACPI_ERROR((AE_INFO, "Invalid argument type"));
+ result = -EIO;
+ goto out;
+ }
+
+ len = obj->integer.value;
+ obj = pkg->package.elements + 2;
+ switch (size) {
+ case I2C_SMBUS_BYTE:
+ case I2C_SMBUS_BYTE_DATA:
+ case I2C_SMBUS_WORD_DATA:
+ if (obj == NULL || obj->type != ACPI_TYPE_INTEGER) {
+ ACPI_ERROR((AE_INFO, "Invalid argument type"));
+ result = -EIO;
+ goto out;
+ }
+ if (len == 2)
+ data->word = obj->integer.value;
+ else
+ data->byte = obj->integer.value;
+ break;
+ case I2C_SMBUS_BLOCK_DATA:
+ if (obj == NULL || obj->type != ACPI_TYPE_BUFFER) {
+ ACPI_ERROR((AE_INFO, "Invalid argument type"));
+ result = -EIO;
+ goto out;
+ }
+ if (len == 0 || len > I2C_SMBUS_BLOCK_MAX)
+ return -EPROTO;
+ data->block[0] = len;
+ memcpy(data->block + 1, obj->buffer.pointer, len);
+ break;
+ }
+
+out:
+ kfree(buffer.pointer);
+ dev_dbg(&adap->dev, "Transaction status: %i\n", result);
+ return result;
+}
+
+static u32 acpi_smbus_cmi_func(struct i2c_adapter *adapter)
+{
+ struct acpi_smbus_cmi *smbus_cmi = adapter->algo_data;
+ u32 ret;
+
+ ret = smbus_cmi->cap_read | smbus_cmi->cap_write ?
+ I2C_FUNC_SMBUS_QUICK : 0;
+
+ ret |= smbus_cmi->cap_read ?
+ (I2C_FUNC_SMBUS_READ_BYTE |
+ I2C_FUNC_SMBUS_READ_BYTE_DATA |
+ I2C_FUNC_SMBUS_READ_WORD_DATA |
+ I2C_FUNC_SMBUS_READ_BLOCK_DATA) : 0;
+
+ ret |= smbus_cmi->cap_write ?
+ (I2C_FUNC_SMBUS_WRITE_BYTE |
+ I2C_FUNC_SMBUS_WRITE_BYTE_DATA |
+ I2C_FUNC_SMBUS_WRITE_WORD_DATA |
+ I2C_FUNC_SMBUS_WRITE_BLOCK_DATA) : 0;
+
+ return ret;
+}
+
+static const struct i2c_algorithm acpi_smbus_cmi_algorithm = {
+ .smbus_xfer = acpi_smbus_cmi_access,
+ .functionality = acpi_smbus_cmi_func,
+};
+
+
+static int acpi_smbus_cmi_add_cap(struct acpi_smbus_cmi *smbus_cmi,
+ const char *name)
+{
+ struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+ union acpi_object *obj;
+ acpi_status status;
+
+ if (!strcmp(name, smbus_methods.mt_info)) {
+ status = acpi_evaluate_object(smbus_cmi->handle,
+ smbus_methods.mt_info,
+ NULL, &buffer);
+ if (ACPI_FAILURE(status)) {
+ ACPI_ERROR((AE_INFO, "Evaluating %s: %i",
+ smbus_methods.mt_info, status));
+ return -EIO;
+ }
+
+ obj = buffer.pointer;
+ if (obj && obj->type == ACPI_TYPE_PACKAGE)
+ obj = obj->package.elements;
+ else {
+ ACPI_ERROR((AE_INFO, "Invalid argument type"));
+ kfree(buffer.pointer);
+ return -EIO;
+ }
+
+ if (obj->type != ACPI_TYPE_INTEGER) {
+ ACPI_ERROR((AE_INFO, "Invalid argument type"));
+ kfree(buffer.pointer);
+ return -EIO;
+ } else
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO, "SMBus CMI Version %x"
+ "\n", (int)obj->integer.value));
+
+ kfree(buffer.pointer);
+ smbus_cmi->cap_info = 1;
+ } else if (!strcmp(name, smbus_methods.mt_sbr))
+ smbus_cmi->cap_read = 1;
+ else if (!strcmp(name, smbus_methods.mt_sbw))
+ smbus_cmi->cap_write = 1;
+ else
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Unsupported CMI method: %s\n",
+ name));
+
+ return 0;
+}
+
+static acpi_status acpi_smbus_cmi_query_methods(acpi_handle handle, u32 level,
+ void *context, void **return_value)
+{
+ char node_name[5];
+ struct acpi_buffer buffer = { sizeof(node_name), node_name };
+ struct acpi_smbus_cmi *smbus_cmi = context;
+ acpi_status status;
+
+ status = acpi_get_name(handle, ACPI_SINGLE_NAME, &buffer);
+
+ if (ACPI_SUCCESS(status))
+ acpi_smbus_cmi_add_cap(smbus_cmi, node_name);
+
+ return AE_OK;
+}
+
+static int acpi_smbus_cmi_add(struct acpi_device *device)
+{
+ struct acpi_smbus_cmi *smbus_cmi;
+
+ smbus_cmi = kzalloc(sizeof(struct acpi_smbus_cmi), GFP_KERNEL);
+ if (!smbus_cmi)
+ return -ENOMEM;
+
+ smbus_cmi->handle = device->handle;
+ strcpy(acpi_device_name(device), ACPI_SMBUS_HC_DEVICE_NAME);
+ strcpy(acpi_device_class(device), ACPI_SMBUS_HC_CLASS);
+ device->driver_data = smbus_cmi;
+ smbus_cmi->cap_info = 0;
+ smbus_cmi->cap_read = 0;
+ smbus_cmi->cap_write = 0;
+
+ acpi_walk_namespace(ACPI_TYPE_METHOD, smbus_cmi->handle, 1,
+ acpi_smbus_cmi_query_methods, smbus_cmi, NULL);
+
+ if (smbus_cmi->cap_info == 0)
+ goto err;
+
+ snprintf(smbus_cmi->adapter.name, sizeof(smbus_cmi->adapter.name),
+ "SMBus CMI adapter %s",
+ acpi_device_name(device));
+ smbus_cmi->adapter.owner = THIS_MODULE;
+ smbus_cmi->adapter.algo = &acpi_smbus_cmi_algorithm;
+ smbus_cmi->adapter.algo_data = smbus_cmi;
+ smbus_cmi->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
+ smbus_cmi->adapter.dev.parent = &device->dev;
+
+ if (i2c_add_adapter(&smbus_cmi->adapter)) {
+ dev_err(&device->dev, "Couldn't register adapter!\n");
+ goto err;
+ }
+
+ return 0;
+
+err:
+ kfree(smbus_cmi);
+ device->driver_data = NULL;
+ return -EIO;
+}
+
+static int acpi_smbus_cmi_remove(struct acpi_device *device, int type)
+{
+ struct acpi_smbus_cmi *smbus_cmi = acpi_driver_data(device);
+
+ i2c_del_adapter(&smbus_cmi->adapter);
+ kfree(smbus_cmi);
+ device->driver_data = NULL;
+
+ return 0;
+}
+
+static struct acpi_driver acpi_smbus_cmi_driver = {
+ .name = ACPI_SMBUS_HC_DEVICE_NAME,
+ .class = ACPI_SMBUS_HC_CLASS,
+ .ids = acpi_smbus_cmi_ids,
+ .ops = {
+ .add = acpi_smbus_cmi_add,
+ .remove = acpi_smbus_cmi_remove,
+ },
+};
+
+static int __init acpi_smbus_cmi_init(void)
+{
+ return acpi_bus_register_driver(&acpi_smbus_cmi_driver);
+}
+
+static void __exit acpi_smbus_cmi_exit(void)
+{
+ acpi_bus_unregister_driver(&acpi_smbus_cmi_driver);
+}
+
+module_init(acpi_smbus_cmi_init);
+module_exit(acpi_smbus_cmi_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Crane Cai <crane.cai@amd.com>");
+MODULE_DESCRIPTION("ACPI SMBus CMI driver");
diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c
index 820487d0d5c..86a9d4e8147 100644
--- a/drivers/i2c/busses/i2c-sh_mobile.c
+++ b/drivers/i2c/busses/i2c-sh_mobile.c
@@ -28,6 +28,7 @@
#include <linux/interrupt.h>
#include <linux/i2c.h>
#include <linux/err.h>
+#include <linux/pm_runtime.h>
#include <linux/clk.h>
#include <linux/io.h>
@@ -165,7 +166,8 @@ static void activate_ch(struct sh_mobile_i2c_data *pd)
u_int32_t denom;
u_int32_t tmp;
- /* Make sure the clock is enabled */
+ /* Wake up device and enable clock */
+ pm_runtime_get_sync(pd->dev);
clk_enable(pd->clk);
/* Get clock rate after clock is enabled */
@@ -213,8 +215,9 @@ static void deactivate_ch(struct sh_mobile_i2c_data *pd)
/* Disable channel */
iowrite8(ioread8(ICCR(pd)) & ~ICCR_ICE, ICCR(pd));
- /* Disable clock */
+ /* Disable clock and mark device as idle */
clk_disable(pd->clk);
+ pm_runtime_put_sync(pd->dev);
}
static unsigned char i2c_op(struct sh_mobile_i2c_data *pd,
@@ -572,6 +575,19 @@ static int sh_mobile_i2c_probe(struct platform_device *dev)
goto err_irq;
}
+ /* Enable Runtime PM for this device.
+ *
+ * Also tell the Runtime PM core to ignore children
+ * for this device since it is valid for us to suspend
+ * this I2C master driver even though the slave devices
+ * on the I2C bus may not be suspended.
+ *
+ * The state of the I2C hardware bus is unaffected by
+ * the Runtime PM state.
+ */
+ pm_suspend_ignore_children(&dev->dev, true);
+ pm_runtime_enable(&dev->dev);
+
/* setup the private data */
adap = &pd->adap;
i2c_set_adapdata(adap, pd);
@@ -614,14 +630,33 @@ static int sh_mobile_i2c_remove(struct platform_device *dev)
iounmap(pd->reg);
sh_mobile_i2c_hook_irqs(dev, 0);
clk_put(pd->clk);
+ pm_runtime_disable(&dev->dev);
kfree(pd);
return 0;
}
+static int sh_mobile_i2c_runtime_nop(struct device *dev)
+{
+ /* Runtime PM callback shared between ->runtime_suspend()
+ * and ->runtime_resume(). Simply returns success.
+ *
+ * This driver re-initializes all registers after
+ * pm_runtime_get_sync() anyway so there is no need
+ * to save and restore registers here.
+ */
+ return 0;
+}
+
+static struct dev_pm_ops sh_mobile_i2c_dev_pm_ops = {
+ .runtime_suspend = sh_mobile_i2c_runtime_nop,
+ .runtime_resume = sh_mobile_i2c_runtime_nop,
+};
+
static struct platform_driver sh_mobile_i2c_driver = {
.driver = {
.name = "i2c-sh_mobile",
.owner = THIS_MODULE,
+ .pm = &sh_mobile_i2c_dev_pm_ops,
},
.probe = sh_mobile_i2c_probe,
.remove = sh_mobile_i2c_remove,
diff --git a/drivers/i2c/busses/i2c-sis96x.c b/drivers/i2c/busses/i2c-sis96x.c
index 8295885b2fd..1649963b00d 100644
--- a/drivers/i2c/busses/i2c-sis96x.c
+++ b/drivers/i2c/busses/i2c-sis96x.c
@@ -280,7 +280,7 @@ static int __devinit sis96x_probe(struct pci_dev *dev,
retval = acpi_check_resource_conflict(&dev->resource[SIS96x_BAR]);
if (retval)
- return retval;
+ return -ENODEV;
/* Everything is happy, let's grab the memory and set things up. */
if (!request_region(sis96x_smbus_base, SMB_IOSIZE,
diff --git a/drivers/i2c/busses/i2c-taos-evm.c b/drivers/i2c/busses/i2c-taos-evm.c
index 224aa12ee7c..dd39c1eb03e 100644
--- a/drivers/i2c/busses/i2c-taos-evm.c
+++ b/drivers/i2c/busses/i2c-taos-evm.c
@@ -32,10 +32,12 @@
#define TAOS_STATE_INIT 0
#define TAOS_STATE_IDLE 1
-#define TAOS_STATE_SEND 2
+#define TAOS_STATE_EOFF 2
#define TAOS_STATE_RECV 3
#define TAOS_CMD_RESET 0x12
+#define TAOS_CMD_ECHO_ON '+'
+#define TAOS_CMD_ECHO_OFF '-'
static DECLARE_WAIT_QUEUE_HEAD(wq);
@@ -102,17 +104,9 @@ static int taos_smbus_xfer(struct i2c_adapter *adapter, u16 addr,
/* Send the transaction to the TAOS EVM */
dev_dbg(&adapter->dev, "Command buffer: %s\n", taos->buffer);
- taos->pos = 0;
- taos->state = TAOS_STATE_SEND;
- serio_write(serio, taos->buffer[0]);
- wait_event_interruptible_timeout(wq, taos->state == TAOS_STATE_IDLE,
- msecs_to_jiffies(250));
- if (taos->state != TAOS_STATE_IDLE) {
- dev_err(&adapter->dev, "Transaction failed "
- "(state=%d, pos=%d)\n", taos->state, taos->pos);
- taos->addr = 0;
- return -EIO;
- }
+ for (p = taos->buffer; *p; p++)
+ serio_write(serio, *p);
+
taos->addr = addr;
/* Start the transaction and read the answer */
@@ -122,7 +116,7 @@ static int taos_smbus_xfer(struct i2c_adapter *adapter, u16 addr,
wait_event_interruptible_timeout(wq, taos->state == TAOS_STATE_IDLE,
msecs_to_jiffies(150));
if (taos->state != TAOS_STATE_IDLE
- || taos->pos != 6) {
+ || taos->pos != 5) {
dev_err(&adapter->dev, "Transaction timeout (pos=%d)\n",
taos->pos);
return -EIO;
@@ -130,7 +124,7 @@ static int taos_smbus_xfer(struct i2c_adapter *adapter, u16 addr,
dev_dbg(&adapter->dev, "Answer buffer: %s\n", taos->buffer);
/* Interpret the returned string */
- p = taos->buffer + 2;
+ p = taos->buffer + 1;
p[3] = '\0';
if (!strcmp(p, "NAK"))
return -ENODEV;
@@ -173,13 +167,9 @@ static irqreturn_t taos_interrupt(struct serio *serio, unsigned char data,
wake_up_interruptible(&wq);
}
break;
- case TAOS_STATE_SEND:
- if (taos->buffer[++taos->pos])
- serio_write(serio, taos->buffer[taos->pos]);
- else {
- taos->state = TAOS_STATE_IDLE;
- wake_up_interruptible(&wq);
- }
+ case TAOS_STATE_EOFF:
+ taos->state = TAOS_STATE_IDLE;
+ wake_up_interruptible(&wq);
break;
case TAOS_STATE_RECV:
taos->buffer[taos->pos++] = data;
@@ -257,6 +247,19 @@ static int taos_connect(struct serio *serio, struct serio_driver *drv)
}
strlcpy(adapter->name, name, sizeof(adapter->name));
+ /* Turn echo off for better performance */
+ taos->state = TAOS_STATE_EOFF;
+ serio_write(serio, TAOS_CMD_ECHO_OFF);
+
+ wait_event_interruptible_timeout(wq, taos->state == TAOS_STATE_IDLE,
+ msecs_to_jiffies(250));
+ if (taos->state != TAOS_STATE_IDLE) {
+ err = -ENODEV;
+ dev_err(&adapter->dev, "Echo off failed "
+ "(state=%d)\n", taos->state);
+ goto exit_close;
+ }
+
err = i2c_add_adapter(adapter);
if (err)
goto exit_close;
diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c
index 54d810a4d00..e4b1543015a 100644
--- a/drivers/i2c/busses/i2c-viapro.c
+++ b/drivers/i2c/busses/i2c-viapro.c
@@ -365,7 +365,7 @@ static int __devinit vt596_probe(struct pci_dev *pdev,
found:
error = acpi_check_region(vt596_smba, 8, vt596_driver.name);
if (error)
- return error;
+ return -ENODEV;
if (!request_region(vt596_smba, 8, vt596_driver.name)) {
dev_err(&pdev->dev, "SMBus region 0x%x already in use!\n",
diff --git a/drivers/i2c/busses/scx200_acb.c b/drivers/i2c/busses/scx200_acb.c
index 648ecc6f60e..cf994bd01d9 100644
--- a/drivers/i2c/busses/scx200_acb.c
+++ b/drivers/i2c/busses/scx200_acb.c
@@ -217,8 +217,10 @@ static void scx200_acb_machine(struct scx200_acb_iface *iface, u8 status)
return;
error:
- dev_err(&iface->adapter.dev, "%s in state %s\n", errmsg,
- scx200_acb_state_name[iface->state]);
+ dev_err(&iface->adapter.dev,
+ "%s in state %s (addr=0x%02x, len=%d, status=0x%02x)\n", errmsg,
+ scx200_acb_state_name[iface->state], iface->address_byte,
+ iface->len, status);
iface->state = state_idle;
iface->result = -EIO;
diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
index 02d746c9c47..f9618f4d4e4 100644
--- a/drivers/i2c/chips/Kconfig
+++ b/drivers/i2c/chips/Kconfig
@@ -16,54 +16,6 @@ config DS1682
This driver can also be built as a module. If so, the module
will be called ds1682.
-config SENSORS_PCF8574
- tristate "Philips PCF8574 and PCF8574A (DEPRECATED)"
- depends on EXPERIMENTAL && GPIO_PCF857X = "n"
- default n
- help
- If you say yes here you get support for Philips PCF8574 and
- PCF8574A chips. These chips are 8-bit I/O expanders for the I2C bus.
-
- This driver can also be built as a module. If so, the module
- will be called pcf8574.
-
- This driver is deprecated and will be dropped soon. Use
- drivers/gpio/pcf857x.c instead.
-
- These devices are hard to detect and rarely found on mainstream
- hardware. If unsure, say N.
-
-config PCF8575
- tristate "Philips PCF8575 (DEPRECATED)"
- default n
- depends on GPIO_PCF857X = "n"
- help
- If you say yes here you get support for Philips PCF8575 chip.
- This chip is a 16-bit I/O expander for the I2C bus. Several other
- chip manufacturers sell equivalent chips, e.g. Texas Instruments.
-
- This driver can also be built as a module. If so, the module
- will be called pcf8575.
-
- This driver is deprecated and will be dropped soon. Use
- drivers/gpio/pcf857x.c instead.
-
- This device is hard to detect and is rarely found on mainstream
- hardware. If unsure, say N.
-
-config SENSORS_PCA9539
- tristate "Philips PCA9539 16-bit I/O port (DEPRECATED)"
- depends on EXPERIMENTAL && GPIO_PCA953X = "n"
- help
- If you say yes here you get support for the Philips PCA9539
- 16-bit I/O port.
-
- This driver can also be built as a module. If so, the module
- will be called pca9539.
-
- This driver is deprecated and will be dropped soon. Use
- drivers/gpio/pca953x.c instead.
-
config SENSORS_TSL2550
tristate "Taos TSL2550 ambient light sensor"
depends on EXPERIMENTAL
diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile
index f4680d16ee3..749cf360629 100644
--- a/drivers/i2c/chips/Makefile
+++ b/drivers/i2c/chips/Makefile
@@ -11,9 +11,6 @@
#
obj-$(CONFIG_DS1682) += ds1682.o
-obj-$(CONFIG_SENSORS_PCA9539) += pca9539.o
-obj-$(CONFIG_SENSORS_PCF8574) += pcf8574.o
-obj-$(CONFIG_PCF8575) += pcf8575.o
obj-$(CONFIG_SENSORS_TSL2550) += tsl2550.o
ifeq ($(CONFIG_I2C_DEBUG_CHIP),y)
diff --git a/drivers/i2c/chips/pca9539.c b/drivers/i2c/chips/pca9539.c
deleted file mode 100644
index 270de4e56a8..00000000000
--- a/drivers/i2c/chips/pca9539.c
+++ /dev/null
@@ -1,152 +0,0 @@
-/*
- pca9539.c - 16-bit I/O port with interrupt and reset
-
- Copyright (C) 2005 Ben Gardner <bgardner@wabtec.com>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; version 2 of the License.
-*/
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/i2c.h>
-#include <linux/hwmon-sysfs.h>
-
-/* Addresses to scan: none, device is not autodetected */
-static const unsigned short normal_i2c[] = { I2C_CLIENT_END };
-
-/* Insmod parameters */
-I2C_CLIENT_INSMOD_1(pca9539);
-
-enum pca9539_cmd
-{
- PCA9539_INPUT_0 = 0,
- PCA9539_INPUT_1 = 1,
- PCA9539_OUTPUT_0 = 2,
- PCA9539_OUTPUT_1 = 3,
- PCA9539_INVERT_0 = 4,
- PCA9539_INVERT_1 = 5,
- PCA9539_DIRECTION_0 = 6,
- PCA9539_DIRECTION_1 = 7,
-};
-
-/* following are the sysfs callback functions */
-static ssize_t pca9539_show(struct device *dev, struct device_attribute *attr,
- char *buf)
-{
- struct sensor_device_attribute *psa = to_sensor_dev_attr(attr);
- struct i2c_client *client = to_i2c_client(dev);
- return sprintf(buf, "%d\n", i2c_smbus_read_byte_data(client,
- psa->index));
-}
-
-static ssize_t pca9539_store(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct sensor_device_attribute *psa = to_sensor_dev_attr(attr);
- struct i2c_client *client = to_i2c_client(dev);
- unsigned long val = simple_strtoul(buf, NULL, 0);
- if (val > 0xff)
- return -EINVAL;
- i2c_smbus_write_byte_data(client, psa->index, val);
- return count;
-}
-
-/* Define the device attributes */
-
-#define PCA9539_ENTRY_RO(name, cmd_idx) \
- static SENSOR_DEVICE_ATTR(name, S_IRUGO, pca9539_show, NULL, cmd_idx)
-
-#define PCA9539_ENTRY_RW(name, cmd_idx) \
- static SENSOR_DEVICE_ATTR(name, S_IRUGO | S_IWUSR, pca9539_show, \
- pca9539_store, cmd_idx)
-
-PCA9539_ENTRY_RO(input0, PCA9539_INPUT_0);
-PCA9539_ENTRY_RO(input1, PCA9539_INPUT_1);
-PCA9539_ENTRY_RW(output0, PCA9539_OUTPUT_0);
-PCA9539_ENTRY_RW(output1, PCA9539_OUTPUT_1);
-PCA9539_ENTRY_RW(invert0, PCA9539_INVERT_0);
-PCA9539_ENTRY_RW(invert1, PCA9539_INVERT_1);
-PCA9539_ENTRY_RW(direction0, PCA9539_DIRECTION_0);
-PCA9539_ENTRY_RW(direction1, PCA9539_DIRECTION_1);
-
-static struct attribute *pca9539_attributes[] = {
- &sensor_dev_attr_input0.dev_attr.attr,
- &sensor_dev_attr_input1.dev_attr.attr,
- &sensor_dev_attr_output0.dev_attr.attr,
- &sensor_dev_attr_output1.dev_attr.attr,
- &sensor_dev_attr_invert0.dev_attr.attr,
- &sensor_dev_attr_invert1.dev_attr.attr,
- &sensor_dev_attr_direction0.dev_attr.attr,
- &sensor_dev_attr_direction1.dev_attr.attr,
- NULL
-};
-
-static struct attribute_group pca9539_defattr_group = {
- .attrs = pca9539_attributes,
-};
-
-/* Return 0 if detection is successful, -ENODEV otherwise */
-static int pca9539_detect(struct i2c_client *client, int kind,
- struct i2c_board_info *info)
-{
- struct i2c_adapter *adapter = client->adapter;
-
- if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
- return -ENODEV;
-
- strlcpy(info->type, "pca9539", I2C_NAME_SIZE);
-
- return 0;
-}
-
-static int pca9539_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
-{
- /* Register sysfs hooks */
- return sysfs_create_group(&client->dev.kobj,
- &pca9539_defattr_group);
-}
-
-static int pca9539_remove(struct i2c_client *client)
-{
- sysfs_remove_group(&client->dev.kobj, &pca9539_defattr_group);
- return 0;
-}
-
-static const struct i2c_device_id pca9539_id[] = {
- { "pca9539", 0 },
- { }
-};
-
-static struct i2c_driver pca9539_driver = {
- .driver = {
- .name = "pca9539",
- },
- .probe = pca9539_probe,
- .remove = pca9539_remove,
- .id_table = pca9539_id,
-
- .detect = pca9539_detect,
- .address_data = &addr_data,
-};
-
-static int __init pca9539_init(void)
-{
- return i2c_add_driver(&pca9539_driver);
-}
-
-static void __exit pca9539_exit(void)
-{
- i2c_del_driver(&pca9539_driver);
-}
-
-MODULE_AUTHOR("Ben Gardner <bgardner@wabtec.com>");
-MODULE_DESCRIPTION("PCA9539 driver");
-MODULE_LICENSE("GPL");
-
-module_init(pca9539_init);
-module_exit(pca9539_exit);
-
diff --git a/drivers/i2c/chips/pcf8574.c b/drivers/i2c/chips/pcf8574.c
deleted file mode 100644
index 6ec309894c8..00000000000
--- a/drivers/i2c/chips/pcf8574.c
+++ /dev/null
@@ -1,215 +0,0 @@
-/*
- Copyright (c) 2000 Frodo Looijaard <frodol@dds.nl>,
- Philip Edelbrock <phil@netroedge.com>,
- Dan Eaton <dan.eaton@rocketlogix.com>
- Ported to Linux 2.6 by Aurelien Jarno <aurel32@debian.org> with
- the help of Jean Delvare <khali@linux-fr.org>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-/* A few notes about the PCF8574:
-
-* The PCF8574 is an 8-bit I/O expander for the I2C bus produced by
- Philips Semiconductors. It is designed to provide a byte I2C
- interface to up to 8 separate devices.
-
-* The PCF8574 appears as a very simple SMBus device which can be
- read from or written to with SMBUS byte read/write accesses.
-
- --Dan
-
-*/
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/i2c.h>
-
-/* Addresses to scan: none, device can't be detected */
-static const unsigned short normal_i2c[] = { I2C_CLIENT_END };
-
-/* Insmod parameters */
-I2C_CLIENT_INSMOD_2(pcf8574, pcf8574a);
-
-/* Each client has this additional data */
-struct pcf8574_data {
- int write; /* Remember last written value */
-};
-
-static void pcf8574_init_client(struct i2c_client *client);
-
-/* following are the sysfs callback functions */
-static ssize_t show_read(struct device *dev, struct device_attribute *attr, char *buf)
-{
- struct i2c_client *client = to_i2c_client(dev);
- return sprintf(buf, "%u\n", i2c_smbus_read_byte(client));
-}
-
-static DEVICE_ATTR(read, S_IRUGO, show_read, NULL);
-
-static ssize_t show_write(struct device *dev, struct device_attribute *attr, char *buf)
-{
- struct pcf8574_data *data = i2c_get_clientdata(to_i2c_client(dev));
-
- if (data->write < 0)
- return data->write;
-
- return sprintf(buf, "%d\n", data->write);
-}
-
-static ssize_t set_write(struct device *dev, struct device_attribute *attr, const char *buf,
- size_t count)
-{
- struct i2c_client *client = to_i2c_client(dev);
- struct pcf8574_data *data = i2c_get_clientdata(client);
- unsigned long val = simple_strtoul(buf, NULL, 10);
-
- if (val > 0xff)
- return -EINVAL;
-
- data->write = val;
- i2c_smbus_write_byte(client, data->write);
- return count;
-}
-
-static DEVICE_ATTR(write, S_IWUSR | S_IRUGO, show_write, set_write);
-
-static struct attribute *pcf8574_attributes[] = {
- &dev_attr_read.attr,
- &dev_attr_write.attr,
- NULL
-};
-
-static const struct attribute_group pcf8574_attr_group = {
- .attrs = pcf8574_attributes,
-};
-
-/*
- * Real code
- */
-
-/* Return 0 if detection is successful, -ENODEV otherwise */
-static int pcf8574_detect(struct i2c_client *client, int kind,
- struct i2c_board_info *info)
-{
- struct i2c_adapter *adapter = client->adapter;
- const char *client_name;
-
- if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE))
- return -ENODEV;
-
- /* Now, we would do the remaining detection. But the PCF8574 is plainly
- impossible to detect! Stupid chip. */
-
- /* Determine the chip type */
- if (kind <= 0) {
- if (client->addr >= 0x38 && client->addr <= 0x3f)
- kind = pcf8574a;
- else
- kind = pcf8574;
- }
-
- if (kind == pcf8574a)
- client_name = "pcf8574a";
- else
- client_name = "pcf8574";
- strlcpy(info->type, client_name, I2C_NAME_SIZE);
-
- return 0;
-}
-
-static int pcf8574_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
-{
- struct pcf8574_data *data;
- int err;
-
- data = kzalloc(sizeof(struct pcf8574_data), GFP_KERNEL);
- if (!data) {
- err = -ENOMEM;
- goto exit;
- }
-
- i2c_set_clientdata(client, data);
-
- /* Initialize the PCF8574 chip */
- pcf8574_init_client(client);
-
- /* Register sysfs hooks */
- err = sysfs_create_group(&client->dev.kobj, &pcf8574_attr_group);
- if (err)
- goto exit_free;
- return 0;
-
- exit_free:
- kfree(data);
- exit:
- return err;
-}
-
-static int pcf8574_remove(struct i2c_client *client)
-{
- sysfs_remove_group(&client->dev.kobj, &pcf8574_attr_group);
- kfree(i2c_get_clientdata(client));
- return 0;
-}
-
-/* Called when we have found a new PCF8574. */
-static void pcf8574_init_client(struct i2c_client *client)
-{
- struct pcf8574_data *data = i2c_get_clientdata(client);
- data->write = -EAGAIN;
-}
-
-static const struct i2c_device_id pcf8574_id[] = {
- { "pcf8574", 0 },
- { "pcf8574a", 0 },
- { }
-};
-
-static struct i2c_driver pcf8574_driver = {
- .driver = {
- .name = "pcf8574",
- },
- .probe = pcf8574_probe,
- .remove = pcf8574_remove,
- .id_table = pcf8574_id,
-
- .detect = pcf8574_detect,
- .address_data = &addr_data,
-};
-
-static int __init pcf8574_init(void)
-{
- return i2c_add_driver(&pcf8574_driver);
-}
-
-static void __exit pcf8574_exit(void)
-{
- i2c_del_driver(&pcf8574_driver);
-}
-
-
-MODULE_AUTHOR
- ("Frodo Looijaard <frodol@dds.nl>, "
- "Philip Edelbrock <phil@netroedge.com>, "
- "Dan Eaton <dan.eaton@rocketlogix.com> "
- "and Aurelien Jarno <aurelien@aurel32.net>");
-MODULE_DESCRIPTION("PCF8574 driver");
-MODULE_LICENSE("GPL");
-
-module_init(pcf8574_init);
-module_exit(pcf8574_exit);
diff --git a/drivers/i2c/chips/pcf8575.c b/drivers/i2c/chips/pcf8575.c
deleted file mode 100644
index 07fd7cb3c57..00000000000
--- a/drivers/i2c/chips/pcf8575.c
+++ /dev/null
@@ -1,198 +0,0 @@
-/*
- pcf8575.c
-
- About the PCF8575 chip: the PCF8575 is a 16-bit I/O expander for the I2C bus
- produced by a.o. Philips Semiconductors.
-
- Copyright (C) 2006 Michael Hennerich, Analog Devices Inc.
- <hennerich@blackfin.uclinux.org>
- Based on pcf8574.c.
-
- Copyright (c) 2007 Bart Van Assche <bart.vanassche@gmail.com>.
- Ported this driver from ucLinux to the mainstream Linux kernel.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/i2c.h>
-#include <linux/slab.h> /* kzalloc() */
-#include <linux/sysfs.h> /* sysfs_create_group() */
-
-/* Addresses to scan: none, device can't be detected */
-static const unsigned short normal_i2c[] = { I2C_CLIENT_END };
-
-/* Insmod parameters */
-I2C_CLIENT_INSMOD;
-
-
-/* Each client has this additional data */
-struct pcf8575_data {
- int write; /* last written value, or error code */
-};
-
-/* following are the sysfs callback functions */
-static ssize_t show_read(struct device *dev, struct device_attribute *attr,
- char *buf)
-{
- struct i2c_client *client = to_i2c_client(dev);
- u16 val;
- u8 iopin_state[2];
-
- i2c_master_recv(client, iopin_state, 2);
-
- val = iopin_state[0];
- val |= iopin_state[1] << 8;
-
- return sprintf(buf, "%u\n", val);
-}
-
-static DEVICE_ATTR(read, S_IRUGO, show_read, NULL);
-
-static ssize_t show_write(struct device *dev, struct device_attribute *attr,
- char *buf)
-{
- struct pcf8575_data *data = dev_get_drvdata(dev);
- if (data->write < 0)
- return data->write;
- return sprintf(buf, "%d\n", data->write);
-}
-
-static ssize_t set_write(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct i2c_client *client = to_i2c_client(dev);
- struct pcf8575_data *data = i2c_get_clientdata(client);
- unsigned long val = simple_strtoul(buf, NULL, 10);
- u8 iopin_state[2];
-
- if (val > 0xffff)
- return -EINVAL;
-
- data->write = val;
-
- iopin_state[0] = val & 0xFF;
- iopin_state[1] = val >> 8;
-
- i2c_master_send(client, iopin_state, 2);
-
- return count;
-}
-
-static DEVICE_ATTR(write, S_IWUSR | S_IRUGO, show_write, set_write);
-
-static struct attribute *pcf8575_attributes[] = {
- &dev_attr_read.attr,
- &dev_attr_write.attr,
- NULL
-};
-
-static const struct attribute_group pcf8575_attr_group = {
- .attrs = pcf8575_attributes,
-};
-
-/*
- * Real code
- */
-
-/* Return 0 if detection is successful, -ENODEV otherwise */
-static int pcf8575_detect(struct i2c_client *client, int kind,
- struct i2c_board_info *info)
-{
- struct i2c_adapter *adapter = client->adapter;
-
- if (!i2c_check_functionality(adapter, I2C_FUNC_I2C))
- return -ENODEV;
-
- /* This is the place to detect whether the chip at the specified
- address really is a PCF8575 chip. However, there is no method known
- to detect whether an I2C chip is a PCF8575 or any other I2C chip. */
-
- strlcpy(info->type, "pcf8575", I2C_NAME_SIZE);
-
- return 0;
-}
-
-static int pcf8575_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
-{
- struct pcf8575_data *data;
- int err;
-
- data = kzalloc(sizeof(struct pcf8575_data), GFP_KERNEL);
- if (!data) {
- err = -ENOMEM;
- goto exit;
- }
-
- i2c_set_clientdata(client, data);
- data->write = -EAGAIN;
-
- /* Register sysfs hooks */
- err = sysfs_create_group(&client->dev.kobj, &pcf8575_attr_group);
- if (err)
- goto exit_free;
-
- return 0;
-
-exit_free:
- kfree(data);
-exit:
- return err;
-}
-
-static int pcf8575_remove(struct i2c_client *client)
-{
- sysfs_remove_group(&client->dev.kobj, &pcf8575_attr_group);
- kfree(i2c_get_clientdata(client));
- return 0;
-}
-
-static const struct i2c_device_id pcf8575_id[] = {
- { "pcf8575", 0 },
- { }
-};
-
-static struct i2c_driver pcf8575_driver = {
- .driver = {
- .owner = THIS_MODULE,
- .name = "pcf8575",
- },
- .probe = pcf8575_probe,
- .remove = pcf8575_remove,
- .id_table = pcf8575_id,
-
- .detect = pcf8575_detect,
- .address_data = &addr_data,
-};
-
-static int __init pcf8575_init(void)
-{
- return i2c_add_driver(&pcf8575_driver);
-}
-
-static void __exit pcf8575_exit(void)
-{
- i2c_del_driver(&pcf8575_driver);
-}
-
-MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>, "
- "Bart Van Assche <bart.vanassche@gmail.com>");
-MODULE_DESCRIPTION("pcf8575 driver");
-MODULE_LICENSE("GPL");
-
-module_init(pcf8575_init);
-module_exit(pcf8575_exit);
diff --git a/drivers/i2c/chips/tsl2550.c b/drivers/i2c/chips/tsl2550.c
index b96f3025e58..aa96bd2d27e 100644
--- a/drivers/i2c/chips/tsl2550.c
+++ b/drivers/i2c/chips/tsl2550.c
@@ -24,10 +24,9 @@
#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/mutex.h>
-#include <linux/delay.h>
#define TSL2550_DRV_NAME "tsl2550"
-#define DRIVER_VERSION "1.1.2"
+#define DRIVER_VERSION "1.2"
/*
* Defines
@@ -96,32 +95,13 @@ static int tsl2550_set_power_state(struct i2c_client *client, int state)
static int tsl2550_get_adc_value(struct i2c_client *client, u8 cmd)
{
- unsigned long end;
- int loop = 0, ret = 0;
+ int ret;
- /*
- * Read ADC channel waiting at most 400ms (see data sheet for further
- * info).
- * To avoid long busy wait we spin for few milliseconds then
- * start sleeping.
- */
- end = jiffies + msecs_to_jiffies(400);
- while (time_before(jiffies, end)) {
- i2c_smbus_write_byte(client, cmd);
-
- if (loop++ < 5)
- mdelay(1);
- else
- msleep(1);
-
- ret = i2c_smbus_read_byte(client);
- if (ret < 0)
- return ret;
- else if (ret & 0x0080)
- break;
- }
+ ret = i2c_smbus_read_byte_data(client, cmd);
+ if (ret < 0)
+ return ret;
if (!(ret & 0x80))
- return -EIO;
+ return -EAGAIN;
return ret & 0x7f; /* remove the "valid" bit */
}
@@ -285,8 +265,6 @@ static ssize_t __tsl2550_show_lux(struct i2c_client *client, char *buf)
return ret;
ch0 = ret;
- mdelay(1);
-
ret = tsl2550_get_adc_value(client, TSL2550_READ_ADC1);
if (ret < 0)
return ret;
@@ -345,11 +323,10 @@ static int tsl2550_init_client(struct i2c_client *client)
* Probe the chip. To do so we try to power up the device and then to
* read back the 0x03 code
*/
- err = i2c_smbus_write_byte(client, TSL2550_POWER_UP);
+ err = i2c_smbus_read_byte_data(client, TSL2550_POWER_UP);
if (err < 0)
return err;
- mdelay(1);
- if (i2c_smbus_read_byte(client) != TSL2550_POWER_UP)
+ if (err != TSL2550_POWER_UP)
return -ENODEV;
data->power_state = 1;
@@ -374,7 +351,8 @@ static int __devinit tsl2550_probe(struct i2c_client *client,
struct tsl2550_data *data;
int *opmode, err = 0;
- if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE)) {
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WRITE_BYTE
+ | I2C_FUNC_SMBUS_READ_BYTE_DATA)) {
err = -EIO;
goto exit;
}
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 0e45c296d3d..8d80fceca6a 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -46,6 +46,7 @@ static DEFINE_MUTEX(core_lock);
static DEFINE_IDR(i2c_adapter_idr);
static LIST_HEAD(userspace_devices);
+static struct device_type i2c_client_type;
static int i2c_check_addr(struct i2c_adapter *adapter, int addr);
static int i2c_detect(struct i2c_adapter *adapter, struct i2c_driver *driver);
@@ -64,9 +65,13 @@ static const struct i2c_device_id *i2c_match_id(const struct i2c_device_id *id,
static int i2c_device_match(struct device *dev, struct device_driver *drv)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct i2c_driver *driver = to_i2c_driver(drv);
+ struct i2c_client *client = i2c_verify_client(dev);
+ struct i2c_driver *driver;
+
+ if (!client)
+ return 0;
+ driver = to_i2c_driver(drv);
/* match on an id table if there is one */
if (driver->id_table)
return i2c_match_id(driver->id_table, client) != NULL;
@@ -94,10 +99,14 @@ static int i2c_device_uevent(struct device *dev, struct kobj_uevent_env *env)
static int i2c_device_probe(struct device *dev)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct i2c_driver *driver = to_i2c_driver(dev->driver);
+ struct i2c_client *client = i2c_verify_client(dev);
+ struct i2c_driver *driver;
int status;
+ if (!client)
+ return 0;
+
+ driver = to_i2c_driver(dev->driver);
if (!driver->probe || !driver->id_table)
return -ENODEV;
client->driver = driver;
@@ -114,11 +123,11 @@ static int i2c_device_probe(struct device *dev)
static int i2c_device_remove(struct device *dev)
{
- struct i2c_client *client = to_i2c_client(dev);
+ struct i2c_client *client = i2c_verify_client(dev);
struct i2c_driver *driver;
int status;
- if (!dev->driver)
+ if (!client || !dev->driver)
return 0;
driver = to_i2c_driver(dev->driver);
@@ -136,37 +145,40 @@ static int i2c_device_remove(struct device *dev)
static void i2c_device_shutdown(struct device *dev)
{
+ struct i2c_client *client = i2c_verify_client(dev);
struct i2c_driver *driver;
- if (!dev->driver)
+ if (!client || !dev->driver)
return;
driver = to_i2c_driver(dev->driver);
if (driver->shutdown)
- driver->shutdown(to_i2c_client(dev));
+ driver->shutdown(client);
}
static int i2c_device_suspend(struct device *dev, pm_message_t mesg)
{
+ struct i2c_client *client = i2c_verify_client(dev);
struct i2c_driver *driver;
- if (!dev->driver)
+ if (!client || !dev->driver)
return 0;
driver = to_i2c_driver(dev->driver);
if (!driver->suspend)
return 0;
- return driver->suspend(to_i2c_client(dev), mesg);
+ return driver->suspend(client, mesg);
}
static int i2c_device_resume(struct device *dev)
{
+ struct i2c_client *client = i2c_verify_client(dev);
struct i2c_driver *driver;
- if (!dev->driver)
+ if (!client || !dev->driver)
return 0;
driver = to_i2c_driver(dev->driver);
if (!driver->resume)
return 0;
- return driver->resume(to_i2c_client(dev));
+ return driver->resume(client);
}
static void i2c_client_dev_release(struct device *dev)
@@ -175,10 +187,10 @@ static void i2c_client_dev_release(struct device *dev)
}
static ssize_t
-show_client_name(struct device *dev, struct device_attribute *attr, char *buf)
+show_name(struct device *dev, struct device_attribute *attr, char *buf)
{
- struct i2c_client *client = to_i2c_client(dev);
- return sprintf(buf, "%s\n", client->name);
+ return sprintf(buf, "%s\n", dev->type == &i2c_client_type ?
+ to_i2c_client(dev)->name : to_i2c_adapter(dev)->name);
}
static ssize_t
@@ -188,18 +200,28 @@ show_modalias(struct device *dev, struct device_attribute *attr, char *buf)
return sprintf(buf, "%s%s\n", I2C_MODULE_PREFIX, client->name);
}
-static struct device_attribute i2c_dev_attrs[] = {
- __ATTR(name, S_IRUGO, show_client_name, NULL),
+static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
+static DEVICE_ATTR(modalias, S_IRUGO, show_modalias, NULL);
+
+static struct attribute *i2c_dev_attrs[] = {
+ &dev_attr_name.attr,
/* modalias helps coldplug: modprobe $(cat .../modalias) */
- __ATTR(modalias, S_IRUGO, show_modalias, NULL),
- { },
+ &dev_attr_modalias.attr,
+ NULL
+};
+
+static struct attribute_group i2c_dev_attr_group = {
+ .attrs = i2c_dev_attrs,
+};
+
+static const struct attribute_group *i2c_dev_attr_groups[] = {
+ &i2c_dev_attr_group,
+ NULL
};
struct bus_type i2c_bus_type = {
.name = "i2c",
- .dev_attrs = i2c_dev_attrs,
.match = i2c_device_match,
- .uevent = i2c_device_uevent,
.probe = i2c_device_probe,
.remove = i2c_device_remove,
.shutdown = i2c_device_shutdown,
@@ -208,6 +230,12 @@ struct bus_type i2c_bus_type = {
};
EXPORT_SYMBOL_GPL(i2c_bus_type);
+static struct device_type i2c_client_type = {
+ .groups = i2c_dev_attr_groups,
+ .uevent = i2c_device_uevent,
+ .release = i2c_client_dev_release,
+};
+
/**
* i2c_verify_client - return parameter as i2c_client, or NULL
@@ -220,7 +248,7 @@ EXPORT_SYMBOL_GPL(i2c_bus_type);
*/
struct i2c_client *i2c_verify_client(struct device *dev)
{
- return (dev->bus == &i2c_bus_type)
+ return (dev->type == &i2c_client_type)
? to_i2c_client(dev)
: NULL;
}
@@ -273,7 +301,7 @@ i2c_new_device(struct i2c_adapter *adap, struct i2c_board_info const *info)
client->dev.parent = &client->adapter->dev;
client->dev.bus = &i2c_bus_type;
- client->dev.release = i2c_client_dev_release;
+ client->dev.type = &i2c_client_type;
dev_set_name(&client->dev, "%d-%04x", i2c_adapter_id(adap),
client->addr);
@@ -368,13 +396,6 @@ static void i2c_adapter_dev_release(struct device *dev)
complete(&adap->dev_released);
}
-static ssize_t
-show_adapter_name(struct device *dev, struct device_attribute *attr, char *buf)
-{
- struct i2c_adapter *adap = to_i2c_adapter(dev);
- return sprintf(buf, "%s\n", adap->name);
-}
-
/*
* Let users instantiate I2C devices through sysfs. This can be used when
* platform initialization code doesn't contain the proper data for
@@ -493,19 +514,34 @@ i2c_sysfs_delete_device(struct device *dev, struct device_attribute *attr,
return res;
}
-static struct device_attribute i2c_adapter_attrs[] = {
- __ATTR(name, S_IRUGO, show_adapter_name, NULL),
- __ATTR(new_device, S_IWUSR, NULL, i2c_sysfs_new_device),
- __ATTR(delete_device, S_IWUSR, NULL, i2c_sysfs_delete_device),
- { },
+static DEVICE_ATTR(new_device, S_IWUSR, NULL, i2c_sysfs_new_device);
+static DEVICE_ATTR(delete_device, S_IWUSR, NULL, i2c_sysfs_delete_device);
+
+static struct attribute *i2c_adapter_attrs[] = {
+ &dev_attr_name.attr,
+ &dev_attr_new_device.attr,
+ &dev_attr_delete_device.attr,
+ NULL
};
-static struct class i2c_adapter_class = {
- .owner = THIS_MODULE,
- .name = "i2c-adapter",
- .dev_attrs = i2c_adapter_attrs,
+static struct attribute_group i2c_adapter_attr_group = {
+ .attrs = i2c_adapter_attrs,
};
+static const struct attribute_group *i2c_adapter_attr_groups[] = {
+ &i2c_adapter_attr_group,
+ NULL
+};
+
+static struct device_type i2c_adapter_type = {
+ .groups = i2c_adapter_attr_groups,
+ .release = i2c_adapter_dev_release,
+};
+
+#ifdef CONFIG_I2C_COMPAT
+static struct class_compat *i2c_adapter_compat_class;
+#endif
+
static void i2c_scan_static_board_info(struct i2c_adapter *adapter)
{
struct i2c_devinfo *devinfo;
@@ -555,14 +591,22 @@ static int i2c_register_adapter(struct i2c_adapter *adap)
adap->timeout = HZ;
dev_set_name(&adap->dev, "i2c-%d", adap->nr);
- adap->dev.release = &i2c_adapter_dev_release;
- adap->dev.class = &i2c_adapter_class;
+ adap->dev.bus = &i2c_bus_type;
+ adap->dev.type = &i2c_adapter_type;
res = device_register(&adap->dev);
if (res)
goto out_list;
dev_dbg(&adap->dev, "adapter [%s] registered\n", adap->name);
+#ifdef CONFIG_I2C_COMPAT
+ res = class_compat_create_link(i2c_adapter_compat_class, &adap->dev,
+ adap->dev.parent);
+ if (res)
+ dev_warn(&adap->dev,
+ "Failed to create compatibility class link\n");
+#endif
+
/* create pre-declared device nodes */
if (adap->nr < __i2c_first_dynamic_bus_num)
i2c_scan_static_board_info(adap);
@@ -741,6 +785,11 @@ int i2c_del_adapter(struct i2c_adapter *adap)
checking the returned value. */
res = device_for_each_child(&adap->dev, NULL, __unregister_client);
+#ifdef CONFIG_I2C_COMPAT
+ class_compat_remove_link(i2c_adapter_compat_class, &adap->dev,
+ adap->dev.parent);
+#endif
+
/* clean up the sysfs representation */
init_completion(&adap->dev_released);
device_unregister(&adap->dev);
@@ -768,9 +817,13 @@ EXPORT_SYMBOL(i2c_del_adapter);
static int __attach_adapter(struct device *dev, void *data)
{
- struct i2c_adapter *adapter = to_i2c_adapter(dev);
+ struct i2c_adapter *adapter;
struct i2c_driver *driver = data;
+ if (dev->type != &i2c_adapter_type)
+ return 0;
+ adapter = to_i2c_adapter(dev);
+
i2c_detect(adapter, driver);
/* Legacy drivers scan i2c busses directly */
@@ -809,8 +862,7 @@ int i2c_register_driver(struct module *owner, struct i2c_driver *driver)
INIT_LIST_HEAD(&driver->clients);
/* Walk the adapters that are already present */
mutex_lock(&core_lock);
- class_for_each_device(&i2c_adapter_class, NULL, driver,
- __attach_adapter);
+ bus_for_each_dev(&i2c_bus_type, NULL, driver, __attach_adapter);
mutex_unlock(&core_lock);
return 0;
@@ -819,10 +871,14 @@ EXPORT_SYMBOL(i2c_register_driver);
static int __detach_adapter(struct device *dev, void *data)
{
- struct i2c_adapter *adapter = to_i2c_adapter(dev);
+ struct i2c_adapter *adapter;
struct i2c_driver *driver = data;
struct i2c_client *client, *_n;
+ if (dev->type != &i2c_adapter_type)
+ return 0;
+ adapter = to_i2c_adapter(dev);
+
/* Remove the devices we created ourselves as the result of hardware
* probing (using a driver's detect method) */
list_for_each_entry_safe(client, _n, &driver->clients, detected) {
@@ -850,8 +906,7 @@ static int __detach_adapter(struct device *dev, void *data)
void i2c_del_driver(struct i2c_driver *driver)
{
mutex_lock(&core_lock);
- class_for_each_device(&i2c_adapter_class, NULL, driver,
- __detach_adapter);
+ bus_for_each_dev(&i2c_bus_type, NULL, driver, __detach_adapter);
mutex_unlock(&core_lock);
driver_unregister(&driver->driver);
@@ -940,17 +995,23 @@ static int __init i2c_init(void)
retval = bus_register(&i2c_bus_type);
if (retval)
return retval;
- retval = class_register(&i2c_adapter_class);
- if (retval)
+#ifdef CONFIG_I2C_COMPAT
+ i2c_adapter_compat_class = class_compat_register("i2c-adapter");
+ if (!i2c_adapter_compat_class) {
+ retval = -ENOMEM;
goto bus_err;
+ }
+#endif
retval = i2c_add_driver(&dummy_driver);
if (retval)
goto class_err;
return 0;
class_err:
- class_unregister(&i2c_adapter_class);
+#ifdef CONFIG_I2C_COMPAT
+ class_compat_unregister(i2c_adapter_compat_class);
bus_err:
+#endif
bus_unregister(&i2c_bus_type);
return retval;
}
@@ -958,7 +1019,9 @@ bus_err:
static void __exit i2c_exit(void)
{
i2c_del_driver(&dummy_driver);
- class_unregister(&i2c_adapter_class);
+#ifdef CONFIG_I2C_COMPAT
+ class_compat_unregister(i2c_adapter_compat_class);
+#endif
bus_unregister(&i2c_bus_type);
}
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-13 15:24:00 +0000