diff options
Diffstat (limited to 'drivers/i2c')
| -rw-r--r-- | drivers/i2c/busses/i2c-piix4.c | 73 |
1 files changed, 72 insertions, 1 deletions
diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c index 761f9dd5362..63d5e597804 100644 --- a/drivers/i2c/busses/i2c-piix4.c +++ b/drivers/i2c/busses/i2c-piix4.c @@ -226,6 +226,70 @@ static int __devinit piix4_setup(struct pci_dev *PIIX4_dev, return 0; } +static int __devinit piix4_setup_sb800(struct pci_dev *PIIX4_dev, + const struct pci_device_id *id) +{ + unsigned short smba_idx = 0xcd6; + u8 smba_en_lo, smba_en_hi, i2ccfg, i2ccfg_offset = 0x10, smb_en = 0x2c; + + /* SB800 SMBus does not support forcing address */ + if (force || force_addr) { + dev_err(&PIIX4_dev->dev, "SB800 SMBus does not support " + "forcing address!\n"); + return -EINVAL; + } + + /* Determine the address of the SMBus areas */ + if (!request_region(smba_idx, 2, "smba_idx")) { + dev_err(&PIIX4_dev->dev, "SMBus base address index region " + "0x%x already in use!\n", smba_idx); + return -EBUSY; + } + outb_p(smb_en, smba_idx); + smba_en_lo = inb_p(smba_idx + 1); + outb_p(smb_en + 1, smba_idx); + smba_en_hi = inb_p(smba_idx + 1); + release_region(smba_idx, 2); + + if ((smba_en_lo & 1) == 0) { + dev_err(&PIIX4_dev->dev, + "Host SMBus controller not enabled!\n"); + return -ENODEV; + } + + piix4_smba = ((smba_en_hi << 8) | smba_en_lo) & 0xffe0; + if (acpi_check_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) + return -EBUSY; + + if (!request_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) { + dev_err(&PIIX4_dev->dev, "SMBus region 0x%x already in use!\n", + piix4_smba); + return -EBUSY; + } + + /* Request the SMBus I2C bus config region */ + if (!request_region(piix4_smba + i2ccfg_offset, 1, "i2ccfg")) { + dev_err(&PIIX4_dev->dev, "SMBus I2C bus config region " + "0x%x already in use!\n", piix4_smba + i2ccfg_offset); + release_region(piix4_smba, SMBIOSIZE); + piix4_smba = 0; + return -EBUSY; + } + i2ccfg = inb_p(piix4_smba + i2ccfg_offset); + release_region(piix4_smba + i2ccfg_offset, 1); + + if (i2ccfg & 1) + dev_dbg(&PIIX4_dev->dev, "Using IRQ for SMBus.\n"); + else + dev_dbg(&PIIX4_dev->dev, "Using SMI# for SMBus.\n"); + + dev_info(&PIIX4_dev->dev, + "SMBus Host Controller at 0x%x, revision %d\n", + piix4_smba, i2ccfg >> 4); + + return 0; +} + static int piix4_transaction(void) { int temp; @@ -433,7 +497,14 @@ static int __devinit piix4_probe(struct pci_dev *dev, { int retval; - retval = piix4_setup(dev, id); + if ((dev->vendor == PCI_VENDOR_ID_ATI) && + (dev->device == PCI_DEVICE_ID_ATI_SBX00_SMBUS) && + (dev->revision >= 0x40)) + /* base address location etc changed in SB800 */ + retval = piix4_setup_sb800(dev, id); + else + retval = piix4_setup(dev, id); + if (retval) return retval; |