summaryrefslogtreecommitdiffstats
path: root/drivers/i2c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/i2c')
-rw-r--r--drivers/i2c/busses/Kconfig2
-rw-r--r--drivers/i2c/busses/i2c-at91.c3
-rw-r--r--drivers/i2c/busses/i2c-bfin-twi.c16
-rw-r--r--drivers/i2c/busses/i2c-cbus-gpio.c5
-rw-r--r--drivers/i2c/busses/i2c-cpm.c6
-rw-r--r--drivers/i2c/busses/i2c-davinci.c6
-rw-r--r--drivers/i2c/busses/i2c-designware-core.c25
-rw-r--r--drivers/i2c/busses/i2c-designware-core.h12
-rw-r--r--drivers/i2c/busses/i2c-designware-platdrv.c46
-rw-r--r--drivers/i2c/busses/i2c-gpio.c9
-rw-r--r--drivers/i2c/busses/i2c-i801.c2
-rw-r--r--drivers/i2c/busses/i2c-ibm_iic.c4
-rw-r--r--drivers/i2c/busses/i2c-imx.c228
-rw-r--r--drivers/i2c/busses/i2c-ismt.c1
-rw-r--r--drivers/i2c/busses/i2c-mpc.c44
-rw-r--r--drivers/i2c/busses/i2c-mv64xxx.c207
-rw-r--r--drivers/i2c/busses/i2c-mxs.c116
-rw-r--r--drivers/i2c/busses/i2c-nomadik.c5
-rw-r--r--drivers/i2c/busses/i2c-nuc900.c2
-rw-r--r--drivers/i2c/busses/i2c-ocores.c12
-rw-r--r--drivers/i2c/busses/i2c-octeon.c3
-rw-r--r--drivers/i2c/busses/i2c-omap.c27
-rw-r--r--drivers/i2c/busses/i2c-pca-platform.c2
-rw-r--r--drivers/i2c/busses/i2c-piix4.c41
-rw-r--r--drivers/i2c/busses/i2c-pnx.c8
-rw-r--r--drivers/i2c/busses/i2c-powermac.c14
-rw-r--r--drivers/i2c/busses/i2c-puv3.c2
-rw-r--r--drivers/i2c/busses/i2c-pxa.c70
-rw-r--r--drivers/i2c/busses/i2c-rcar.c37
-rw-r--r--drivers/i2c/busses/i2c-s3c2410.c4
-rw-r--r--drivers/i2c/busses/i2c-s6000.c5
-rw-r--r--drivers/i2c/busses/i2c-sh7760.c2
-rw-r--r--drivers/i2c/busses/i2c-sh_mobile.c4
-rw-r--r--drivers/i2c/busses/i2c-sirf.c39
-rw-r--r--drivers/i2c/busses/i2c-stu300.c7
-rw-r--r--drivers/i2c/busses/i2c-tegra.c3
-rw-r--r--drivers/i2c/busses/i2c-tiny-usb.c49
-rw-r--r--drivers/i2c/busses/i2c-versatile.c2
-rw-r--r--drivers/i2c/busses/i2c-wmt.c3
-rw-r--r--drivers/i2c/busses/i2c-xiic.c5
-rw-r--r--drivers/i2c/i2c-core.c206
-rw-r--r--drivers/i2c/i2c-mux.c3
-rw-r--r--drivers/i2c/i2c-smbus.c2
-rw-r--r--drivers/i2c/muxes/i2c-arb-gpio-challenge.c3
-rw-r--r--drivers/i2c/muxes/i2c-mux-gpio.c9
-rw-r--r--drivers/i2c/muxes/i2c-mux-pca9541.c2
-rw-r--r--drivers/i2c/muxes/i2c-mux-pca954x.c2
-rw-r--r--drivers/i2c/muxes/i2c-mux-pinctrl.c3
48 files changed, 1009 insertions, 299 deletions
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index dc6dea614ab..fcdd321f709 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -385,7 +385,7 @@ config I2C_CPM
config I2C_DAVINCI
tristate "DaVinci I2C driver"
- depends on ARCH_DAVINCI
+ depends on ARCH_DAVINCI || ARCH_KEYSTONE
help
Support for TI DaVinci I2C controller driver.
diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c
index 6bb839b688b..fd059308aff 100644
--- a/drivers/i2c/busses/i2c-at91.c
+++ b/drivers/i2c/busses/i2c-at91.c
@@ -28,7 +28,6 @@
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_device.h>
-#include <linux/of_i2c.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/platform_data/dma-atmel.h>
@@ -775,8 +774,6 @@ static int at91_twi_probe(struct platform_device *pdev)
return rc;
}
- of_i2c_register_devices(&dev->adapter);
-
dev_info(dev->dev, "AT91 i2c bus driver.\n");
return 0;
}
diff --git a/drivers/i2c/busses/i2c-bfin-twi.c b/drivers/i2c/busses/i2c-bfin-twi.c
index 13ea1c29873..35a473ba3d8 100644
--- a/drivers/i2c/busses/i2c-bfin-twi.c
+++ b/drivers/i2c/busses/i2c-bfin-twi.c
@@ -582,6 +582,7 @@ static struct i2c_algorithm bfin_twi_algorithm = {
.functionality = bfin_twi_functionality,
};
+#ifdef CONFIG_PM_SLEEP
static int i2c_bfin_twi_suspend(struct device *dev)
{
struct bfin_twi_iface *iface = dev_get_drvdata(dev);
@@ -619,6 +620,10 @@ static int i2c_bfin_twi_resume(struct device *dev)
static SIMPLE_DEV_PM_OPS(i2c_bfin_twi_pm,
i2c_bfin_twi_suspend, i2c_bfin_twi_resume);
+#define I2C_BFIN_TWI_PM_OPS (&i2c_bfin_twi_pm)
+#else
+#define I2C_BFIN_TWI_PM_OPS NULL
+#endif
static int i2c_bfin_twi_probe(struct platform_device *pdev)
{
@@ -669,8 +674,9 @@ static int i2c_bfin_twi_probe(struct platform_device *pdev)
p_adap->timeout = 5 * HZ;
p_adap->retries = 3;
- rc = peripheral_request_list((unsigned short *)pdev->dev.platform_data,
- "i2c-bfin-twi");
+ rc = peripheral_request_list(
+ (unsigned short *)dev_get_platdata(&pdev->dev),
+ "i2c-bfin-twi");
if (rc) {
dev_err(&pdev->dev, "Can't setup pin mux!\n");
goto out_error_pin_mux;
@@ -717,7 +723,7 @@ out_error_add_adapter:
free_irq(iface->irq, iface);
out_error_req_irq:
out_error_no_irq:
- peripheral_free_list((unsigned short *)pdev->dev.platform_data);
+ peripheral_free_list((unsigned short *)dev_get_platdata(&pdev->dev));
out_error_pin_mux:
iounmap(iface->regs_base);
out_error_ioremap:
@@ -733,7 +739,7 @@ static int i2c_bfin_twi_remove(struct platform_device *pdev)
i2c_del_adapter(&(iface->adap));
free_irq(iface->irq, iface);
- peripheral_free_list((unsigned short *)pdev->dev.platform_data);
+ peripheral_free_list((unsigned short *)dev_get_platdata(&pdev->dev));
iounmap(iface->regs_base);
kfree(iface);
@@ -746,7 +752,7 @@ static struct platform_driver i2c_bfin_twi_driver = {
.driver = {
.name = "i2c-bfin-twi",
.owner = THIS_MODULE,
- .pm = &i2c_bfin_twi_pm,
+ .pm = I2C_BFIN_TWI_PM_OPS,
},
};
diff --git a/drivers/i2c/busses/i2c-cbus-gpio.c b/drivers/i2c/busses/i2c-cbus-gpio.c
index 1be13ac11dc..2d46f13adfd 100644
--- a/drivers/i2c/busses/i2c-cbus-gpio.c
+++ b/drivers/i2c/busses/i2c-cbus-gpio.c
@@ -233,8 +233,9 @@ static int cbus_i2c_probe(struct platform_device *pdev)
chost->clk_gpio = of_get_gpio(dnode, 0);
chost->dat_gpio = of_get_gpio(dnode, 1);
chost->sel_gpio = of_get_gpio(dnode, 2);
- } else if (pdev->dev.platform_data) {
- struct i2c_cbus_platform_data *pdata = pdev->dev.platform_data;
+ } else if (dev_get_platdata(&pdev->dev)) {
+ struct i2c_cbus_platform_data *pdata =
+ dev_get_platdata(&pdev->dev);
chost->clk_gpio = pdata->clk_gpio;
chost->dat_gpio = pdata->dat_gpio;
chost->sel_gpio = pdata->sel_gpio;
diff --git a/drivers/i2c/busses/i2c-cpm.c b/drivers/i2c/busses/i2c-cpm.c
index 2e1f7eb55bf..b2b8aa9adc0 100644
--- a/drivers/i2c/busses/i2c-cpm.c
+++ b/drivers/i2c/busses/i2c-cpm.c
@@ -42,7 +42,6 @@
#include <linux/dma-mapping.h>
#include <linux/of_device.h>
#include <linux/of_platform.h>
-#include <linux/of_i2c.h>
#include <sysdev/fsl_soc.h>
#include <asm/cpm.h>
@@ -681,11 +680,6 @@ static int cpm_i2c_probe(struct platform_device *ofdev)
dev_dbg(&ofdev->dev, "hw routines for %s registered.\n",
cpm->adap.name);
- /*
- * register OF I2C devices
- */
- of_i2c_register_devices(&cpm->adap);
-
return 0;
out_shut:
cpm_i2c_shutdown(cpm);
diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c
index fa556057d22..57473415be1 100644
--- a/drivers/i2c/busses/i2c-davinci.c
+++ b/drivers/i2c/busses/i2c-davinci.c
@@ -38,10 +38,7 @@
#include <linux/slab.h>
#include <linux/cpufreq.h>
#include <linux/gpio.h>
-#include <linux/of_i2c.h>
#include <linux/of_device.h>
-
-#include <mach/hardware.h>
#include <linux/platform_data/i2c-davinci.h>
/* ----- global defines ----------------------------------------------- */
@@ -665,7 +662,7 @@ static int davinci_i2c_probe(struct platform_device *pdev)
#endif
dev->dev = &pdev->dev;
dev->irq = irq->start;
- dev->pdata = dev->dev->platform_data;
+ dev->pdata = dev_get_platdata(&dev->dev);
platform_set_drvdata(pdev, dev);
if (!dev->pdata && pdev->dev.of_node) {
@@ -728,7 +725,6 @@ static int davinci_i2c_probe(struct platform_device *pdev)
dev_err(&pdev->dev, "failure adding adapter\n");
goto err_unuse_clocks;
}
- of_i2c_register_devices(adap);
return 0;
diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c
index ad46616de29..dbecf08399f 100644
--- a/drivers/i2c/busses/i2c-designware-core.c
+++ b/drivers/i2c/busses/i2c-designware-core.c
@@ -317,6 +317,12 @@ int i2c_dw_init(struct dw_i2c_dev *dev)
47, /* tLOW = 4.7 us */
3, /* tf = 0.3 us */
0); /* No offset */
+
+ /* Allow platforms to specify the ideal HCNT and LCNT values */
+ if (dev->ss_hcnt && dev->ss_lcnt) {
+ hcnt = dev->ss_hcnt;
+ lcnt = dev->ss_lcnt;
+ }
dw_writel(dev, hcnt, DW_IC_SS_SCL_HCNT);
dw_writel(dev, lcnt, DW_IC_SS_SCL_LCNT);
dev_dbg(dev->dev, "Standard-mode HCNT:LCNT = %d:%d\n", hcnt, lcnt);
@@ -331,6 +337,11 @@ int i2c_dw_init(struct dw_i2c_dev *dev)
13, /* tLOW = 1.3 us */
3, /* tf = 0.3 us */
0); /* No offset */
+
+ if (dev->fs_hcnt && dev->fs_lcnt) {
+ hcnt = dev->fs_hcnt;
+ lcnt = dev->fs_lcnt;
+ }
dw_writel(dev, hcnt, DW_IC_FS_SCL_HCNT);
dw_writel(dev, lcnt, DW_IC_FS_SCL_LCNT);
dev_dbg(dev->dev, "Fast-mode HCNT:LCNT = %d:%d\n", hcnt, lcnt);
@@ -416,6 +427,7 @@ i2c_dw_xfer_msg(struct dw_i2c_dev *dev)
u32 addr = msgs[dev->msg_write_idx].addr;
u32 buf_len = dev->tx_buf_len;
u8 *buf = dev->tx_buf;
+ bool need_restart = false;
intr_mask = DW_IC_INTR_DEFAULT_MASK;
@@ -443,6 +455,14 @@ i2c_dw_xfer_msg(struct dw_i2c_dev *dev)
/* new i2c_msg */
buf = msgs[dev->msg_write_idx].buf;
buf_len = msgs[dev->msg_write_idx].len;
+
+ /* If both IC_EMPTYFIFO_HOLD_MASTER_EN and
+ * IC_RESTART_EN are set, we must manually
+ * set restart bit between messages.
+ */
+ if ((dev->master_cfg & DW_IC_CON_RESTART_EN) &&
+ (dev->msg_write_idx > 0))
+ need_restart = true;
}
tx_limit = dev->tx_fifo_depth - dw_readl(dev, DW_IC_TXFLR);
@@ -461,6 +481,11 @@ i2c_dw_xfer_msg(struct dw_i2c_dev *dev)
buf_len == 1)
cmd |= BIT(9);
+ if (need_restart) {
+ cmd |= BIT(10);
+ need_restart = false;
+ }
+
if (msgs[dev->msg_write_idx].flags & I2C_M_RD) {
/* avoid rx buffer overrun */
diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h
index 912aa226286..e8a756537ed 100644
--- a/drivers/i2c/busses/i2c-designware-core.h
+++ b/drivers/i2c/busses/i2c-designware-core.h
@@ -61,6 +61,14 @@
* @tx_fifo_depth: depth of the hardware tx fifo
* @rx_fifo_depth: depth of the hardware rx fifo
* @rx_outstanding: current master-rx elements in tx fifo
+ * @ss_hcnt: standard speed HCNT value
+ * @ss_lcnt: standard speed LCNT value
+ * @fs_hcnt: fast speed HCNT value
+ * @fs_lcnt: fast speed LCNT value
+ *
+ * HCNT and LCNT parameters can be used if the platform knows more accurate
+ * values than the one computed based only on the input clock frequency.
+ * Leave them to be %0 if not used.
*/
struct dw_i2c_dev {
struct device *dev;
@@ -91,6 +99,10 @@ struct dw_i2c_dev {
unsigned int rx_fifo_depth;
int rx_outstanding;
u32 sda_hold_time;
+ u16 ss_hcnt;
+ u16 ss_lcnt;
+ u16 fs_hcnt;
+ u16 fs_lcnt;
};
#define ACCESS_SWAP 0x00000001
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index 4c5fadabe49..4c1b60539a2 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -35,7 +35,6 @@
#include <linux/err.h>
#include <linux/interrupt.h>
#include <linux/of.h>
-#include <linux/of_i2c.h>
#include <linux/platform_device.h>
#include <linux/pm.h>
#include <linux/pm_runtime.h>
@@ -54,9 +53,33 @@ static u32 i2c_dw_get_clk_rate_khz(struct dw_i2c_dev *dev)
}
#ifdef CONFIG_ACPI
+static void dw_i2c_acpi_params(struct platform_device *pdev, char method[],
+ u16 *hcnt, u16 *lcnt, u32 *sda_hold)
+{
+ struct acpi_buffer buf = { ACPI_ALLOCATE_BUFFER };
+ acpi_handle handle = ACPI_HANDLE(&pdev->dev);
+ union acpi_object *obj;
+
+ if (ACPI_FAILURE(acpi_evaluate_object(handle, method, NULL, &buf)))
+ return;
+
+ obj = (union acpi_object *)buf.pointer;
+ if (obj->type == ACPI_TYPE_PACKAGE && obj->package.count == 3) {
+ const union acpi_object *objs = obj->package.elements;
+
+ *hcnt = (u16)objs[0].integer.value;
+ *lcnt = (u16)objs[1].integer.value;
+ if (sda_hold)
+ *sda_hold = (u32)objs[2].integer.value;
+ }
+
+ kfree(buf.pointer);
+}
+
static int dw_i2c_acpi_configure(struct platform_device *pdev)
{
struct dw_i2c_dev *dev = platform_get_drvdata(pdev);
+ bool fs_mode = dev->master_cfg & DW_IC_CON_SPEED_FAST;
if (!ACPI_HANDLE(&pdev->dev))
return -ENODEV;
@@ -64,6 +87,16 @@ static int dw_i2c_acpi_configure(struct platform_device *pdev)
dev->adapter.nr = -1;
dev->tx_fifo_depth = 32;
dev->rx_fifo_depth = 32;
+
+ /*
+ * Try to get SDA hold time and *CNT values from an ACPI method if
+ * it exists for both supported speed modes.
+ */
+ dw_i2c_acpi_params(pdev, "SSCN", &dev->ss_hcnt, &dev->ss_lcnt,
+ fs_mode ? NULL : &dev->sda_hold_time);
+ dw_i2c_acpi_params(pdev, "FMCN", &dev->fs_hcnt, &dev->fs_lcnt,
+ fs_mode ? &dev->sda_hold_time : NULL);
+
return 0;
}
@@ -172,8 +205,6 @@ static int dw_i2c_probe(struct platform_device *pdev)
dev_err(&pdev->dev, "failure adding adapter\n");
return r;
}
- of_i2c_register_devices(adap);
- acpi_i2c_register_devices(adap);
pm_runtime_set_autosuspend_delay(&pdev->dev, 1000);
pm_runtime_use_autosuspend(&pdev->dev);
@@ -207,7 +238,7 @@ static const struct of_device_id dw_i2c_of_match[] = {
MODULE_DEVICE_TABLE(of, dw_i2c_of_match);
#endif
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
static int dw_i2c_suspend(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
@@ -228,9 +259,12 @@ static int dw_i2c_resume(struct device *dev)
return 0;
}
-#endif
static SIMPLE_DEV_PM_OPS(dw_i2c_dev_pm_ops, dw_i2c_suspend, dw_i2c_resume);
+#define DW_I2C_DEV_PM_OPS (&dw_i2c_dev_pm_ops)
+#else
+#define DW_I2C_DEV_PM_OPS NULL
+#endif
/* work with hotplug and coldplug */
MODULE_ALIAS("platform:i2c_designware");
@@ -242,7 +276,7 @@ static struct platform_driver dw_i2c_driver = {
.owner = THIS_MODULE,
.of_match_table = of_match_ptr(dw_i2c_of_match),
.acpi_match_table = ACPI_PTR(dw_i2c_acpi_match),
- .pm = &dw_i2c_dev_pm_ops,
+ .pm = DW_I2C_DEV_PM_OPS,
},
};
diff --git a/drivers/i2c/busses/i2c-gpio.c b/drivers/i2c/busses/i2c-gpio.c
index bc6e139c6e7..bfa02c6c2dd 100644
--- a/drivers/i2c/busses/i2c-gpio.c
+++ b/drivers/i2c/busses/i2c-gpio.c
@@ -16,7 +16,6 @@
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/of_gpio.h>
-#include <linux/of_i2c.h>
struct i2c_gpio_private_data {
struct i2c_adapter adap;
@@ -137,9 +136,9 @@ static int i2c_gpio_probe(struct platform_device *pdev)
if (ret)
return ret;
} else {
- if (!pdev->dev.platform_data)
+ if (!dev_get_platdata(&pdev->dev))
return -ENXIO;
- pdata = pdev->dev.platform_data;
+ pdata = dev_get_platdata(&pdev->dev);
sda_pin = pdata->sda_pin;
scl_pin = pdata->scl_pin;
}
@@ -171,7 +170,7 @@ static int i2c_gpio_probe(struct platform_device *pdev)
pdata->scl_pin = scl_pin;
of_i2c_gpio_get_props(pdev->dev.of_node, pdata);
} else {
- memcpy(pdata, pdev->dev.platform_data, sizeof(*pdata));
+ memcpy(pdata, dev_get_platdata(&pdev->dev), sizeof(*pdata));
}
if (pdata->sda_is_open_drain) {
@@ -224,8 +223,6 @@ static int i2c_gpio_probe(struct platform_device *pdev)
if (ret)
goto err_add_bus;
- of_i2c_register_devices(adap);
-
platform_set_drvdata(pdev, priv);
dev_info(&pdev->dev, "using pins %u (SDA) and %u (SCL%s)\n",
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 4ebceed6bc6..4296d172127 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -87,7 +87,6 @@
#include <linux/slab.h>
#include <linux/wait.h>
#include <linux/err.h>
-#include <linux/of_i2c.h>
#if (defined CONFIG_I2C_MUX_GPIO || defined CONFIG_I2C_MUX_GPIO_MODULE) && \
defined CONFIG_DMI
@@ -1230,7 +1229,6 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
goto exit_free_irq;
}
- of_i2c_register_devices(&priv->adapter);
i801_probe_optional_slaves(priv);
/* We ignore errors - multiplexing is optional */
i801_add_mux(priv);
diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c
index 973f5168827..ff3caa0c28c 100644
--- a/drivers/i2c/busses/i2c-ibm_iic.c
+++ b/drivers/i2c/busses/i2c-ibm_iic.c
@@ -42,7 +42,6 @@
#include <linux/io.h>
#include <linux/i2c.h>
#include <linux/of_platform.h>
-#include <linux/of_i2c.h>
#include "i2c-ibm_iic.h"
@@ -759,9 +758,6 @@ static int iic_probe(struct platform_device *ofdev)
dev_info(&ofdev->dev, "using %s mode\n",
dev->fast_mode ? "fast (400 kHz)" : "standard (100 kHz)");
- /* Now register all the child nodes */
- of_i2c_register_devices(adap);
-
return 0;
error_cleanup:
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index e24279725d3..ccf46656bda 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -30,6 +30,8 @@
* Copyright (C) 2007 RightHand Technologies, Inc.
* Copyright (C) 2008 Darius Augulis <darius.augulis at teltonika.lt>
*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
*/
/** Includes *******************************************************************
@@ -50,7 +52,6 @@
#include <linux/slab.h>
#include <linux/of.h>
#include <linux/of_device.h>
-#include <linux/of_i2c.h>
#include <linux/platform_data/i2c-imx.h>
/** Defines ********************************************************************
@@ -62,12 +63,22 @@
/* Default value */
#define IMX_I2C_BIT_RATE 100000 /* 100kHz */
-/* IMX I2C registers */
+/* IMX I2C registers:
+ * the I2C register offset is different between SoCs,
+ * to provid support for all these chips, split the
+ * register offset into a fixed base address and a
+ * variable shift value, then the full register offset
+ * will be calculated by
+ * reg_off = ( reg_base_addr << reg_shift)
+ */
#define IMX_I2C_IADR 0x00 /* i2c slave address */
-#define IMX_I2C_IFDR 0x04 /* i2c frequency divider */
-#define IMX_I2C_I2CR 0x08 /* i2c control */
-#define IMX_I2C_I2SR 0x0C /* i2c status */
-#define IMX_I2C_I2DR 0x10 /* i2c transfer data */
+#define IMX_I2C_IFDR 0x01 /* i2c frequency divider */
+#define IMX_I2C_I2CR 0x02 /* i2c control */
+#define IMX_I2C_I2SR 0x03 /* i2c status */
+#define IMX_I2C_I2DR 0x04 /* i2c transfer data */
+
+#define IMX_I2C_REGSHIFT 2
+#define VF610_I2C_REGSHIFT 0
/* Bits of IMX I2C registers */
#define I2SR_RXAK 0x01
@@ -84,6 +95,19 @@
#define I2CR_IIEN 0x40
#define I2CR_IEN 0x80
+/* register bits different operating codes definition:
+ * 1) I2SR: Interrupt flags clear operation differ between SoCs:
+ * - write zero to clear(w0c) INT flag on i.MX,
+ * - but write one to clear(w1c) INT flag on Vybrid.
+ * 2) I2CR: I2C module enable operation also differ between SoCs:
+ * - set I2CR_IEN bit enable the module on i.MX,
+ * - but clear I2CR_IEN bit enable the module on Vybrid.
+ */
+#define I2SR_CLR_OPCODE_W0C 0x0
+#define I2SR_CLR_OPCODE_W1C (I2SR_IAL | I2SR_IIF)
+#define I2CR_IEN_OPCODE_0 0x0
+#define I2CR_IEN_OPCODE_1 I2CR_IEN
+
/** Variables ******************************************************************
*******************************************************************************/
@@ -95,8 +119,12 @@
*
* Duplicated divider values removed from list
*/
+struct imx_i2c_clk_pair {
+ u16 div;
+ u16 val;
+};
-static u16 __initdata i2c_clk_div[50][2] = {
+static struct imx_i2c_clk_pair imx_i2c_clk_div[] = {
{ 22, 0x20 }, { 24, 0x21 }, { 26, 0x22 }, { 28, 0x23 },
{ 30, 0x00 }, { 32, 0x24 }, { 36, 0x25 }, { 40, 0x26 },
{ 42, 0x03 }, { 44, 0x27 }, { 48, 0x28 }, { 52, 0x05 },
@@ -112,9 +140,38 @@ static u16 __initdata i2c_clk_div[50][2] = {
{ 3072, 0x1E }, { 3840, 0x1F }
};
+/* Vybrid VF610 clock divider, register value pairs */
+static struct imx_i2c_clk_pair vf610_i2c_clk_div[] = {
+ { 20, 0x00 }, { 22, 0x01 }, { 24, 0x02 }, { 26, 0x03 },
+ { 28, 0x04 }, { 30, 0x05 }, { 32, 0x09 }, { 34, 0x06 },
+ { 36, 0x0A }, { 40, 0x07 }, { 44, 0x0C }, { 48, 0x0D },
+ { 52, 0x43 }, { 56, 0x0E }, { 60, 0x45 }, { 64, 0x12 },
+ { 68, 0x0F }, { 72, 0x13 }, { 80, 0x14 }, { 88, 0x15 },
+ { 96, 0x19 }, { 104, 0x16 }, { 112, 0x1A }, { 128, 0x17 },
+ { 136, 0x4F }, { 144, 0x1C }, { 160, 0x1D }, { 176, 0x55 },
+ { 192, 0x1E }, { 208, 0x56 }, { 224, 0x22 }, { 228, 0x24 },
+ { 240, 0x1F }, { 256, 0x23 }, { 288, 0x5C }, { 320, 0x25 },
+ { 384, 0x26 }, { 448, 0x2A }, { 480, 0x27 }, { 512, 0x2B },
+ { 576, 0x2C }, { 640, 0x2D }, { 768, 0x31 }, { 896, 0x32 },
+ { 960, 0x2F }, { 1024, 0x33 }, { 1152, 0x34 }, { 1280, 0x35 },
+ { 1536, 0x36 }, { 1792, 0x3A }, { 1920, 0x37 }, { 2048, 0x3B },
+ { 2304, 0x3C }, { 2560, 0x3D }, { 3072, 0x3E }, { 3584, 0x7A },
+ { 3840, 0x3F }, { 4096, 0x7B }, { 5120, 0x7D }, { 6144, 0x7E },
+};
+
enum imx_i2c_type {
IMX1_I2C,
IMX21_I2C,
+ VF610_I2C,
+};
+
+struct imx_i2c_hwdata {
+ enum imx_i2c_type devtype;
+ unsigned regshift;
+ struct imx_i2c_clk_pair *clk_div;
+ unsigned ndivs;
+ unsigned i2sr_clr_opcode;
+ unsigned i2cr_ien_opcode;
};
struct imx_i2c_struct {
@@ -126,16 +183,46 @@ struct imx_i2c_struct {
unsigned int disable_delay;
int stopped;
unsigned int ifdr; /* IMX_I2C_IFDR */
- enum imx_i2c_type devtype;
+ const struct imx_i2c_hwdata *hwdata;
+};
+
+static const struct imx_i2c_hwdata imx1_i2c_hwdata = {
+ .devtype = IMX1_I2C,
+ .regshift = IMX_I2C_REGSHIFT,
+ .clk_div = imx_i2c_clk_div,
+ .ndivs = ARRAY_SIZE(imx_i2c_clk_div),
+ .i2sr_clr_opcode = I2SR_CLR_OPCODE_W0C,
+ .i2cr_ien_opcode = I2CR_IEN_OPCODE_1,
+
+};
+
+static const struct imx_i2c_hwdata imx21_i2c_hwdata = {
+ .devtype = IMX21_I2C,
+ .regshift = IMX_I2C_REGSHIFT,
+ .clk_div = imx_i2c_clk_div,
+ .ndivs = ARRAY_SIZE(imx_i2c_clk_div),
+ .i2sr_clr_opcode = I2SR_CLR_OPCODE_W0C,
+ .i2cr_ien_opcode = I2CR_IEN_OPCODE_1,
+
+};
+
+static struct imx_i2c_hwdata vf610_i2c_hwdata = {
+ .devtype = VF610_I2C,
+ .regshift = VF610_I2C_REGSHIFT,
+ .clk_div = vf610_i2c_clk_div,
+ .ndivs = ARRAY_SIZE(vf610_i2c_clk_div),
+ .i2sr_clr_opcode = I2SR_CLR_OPCODE_W1C,
+ .i2cr_ien_opcode = I2CR_IEN_OPCODE_0,
+
};
static struct platform_device_id imx_i2c_devtype[] = {
{
.name = "imx1-i2c",
- .driver_data = IMX1_I2C,
+ .driver_data = (kernel_ulong_t)&imx1_i2c_hwdata,
}, {
.name = "imx21-i2c",
- .driver_data = IMX21_I2C,
+ .driver_data = (kernel_ulong_t)&imx21_i2c_hwdata,
}, {
/* sentinel */
}
@@ -143,15 +230,28 @@ static struct platform_device_id imx_i2c_devtype[] = {
MODULE_DEVICE_TABLE(platform, imx_i2c_devtype);
static const struct of_device_id i2c_imx_dt_ids[] = {
- { .compatible = "fsl,imx1-i2c", .data = &imx_i2c_devtype[IMX1_I2C], },
- { .compatible = "fsl,imx21-i2c", .data = &imx_i2c_devtype[IMX21_I2C], },
+ { .compatible = "fsl,imx1-i2c", .data = &imx1_i2c_hwdata, },
+ { .compatible = "fsl,imx21-i2c", .data = &imx21_i2c_hwdata, },
+ { .compatible = "fsl,vf610-i2c", .data = &vf610_i2c_hwdata, },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, i2c_imx_dt_ids);
static inline int is_imx1_i2c(struct imx_i2c_struct *i2c_imx)
{
- return i2c_imx->devtype == IMX1_I2C;
+ return i2c_imx->hwdata->devtype == IMX1_I2C;
+}
+
+static inline void imx_i2c_write_reg(unsigned int val,
+ struct imx_i2c_struct *i2c_imx, unsigned int reg)
+{
+ writeb(val, i2c_imx->base + (reg << i2c_imx->hwdata->regshift));
+}
+
+static inline unsigned char imx_i2c_read_reg(struct imx_i2c_struct *i2c_imx,
+ unsigned int reg)
+{
+ return readb(i2c_imx->base + (reg << i2c_imx->hwdata->regshift));
}
/** Functions for IMX I2C adapter driver ***************************************
@@ -165,7 +265,7 @@ static int i2c_imx_bus_busy(struct imx_i2c_struct *i2c_imx, int for_busy)
dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__);
while (1) {
- temp = readb(i2c_imx->base + IMX_I2C_I2SR);
+ temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR);
if (for_busy && (temp & I2SR_IBB))
break;
if (!for_busy && !(temp & I2SR_IBB))
@@ -196,7 +296,7 @@ static int i2c_imx_trx_complete(struct imx_i2c_struct *i2c_imx)
static int i2c_imx_acked(struct imx_i2c_struct *i2c_imx)
{
- if (readb(i2c_imx->base + IMX_I2C_I2SR) & I2SR_RXAK) {
+ if (imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR) & I2SR_RXAK) {
dev_dbg(&i2c_imx->adapter.dev, "<%s> No ACK\n", __func__);
return -EIO; /* No ACK */
}
@@ -213,25 +313,25 @@ static int i2c_imx_start(struct imx_i2c_struct *i2c_imx)
dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__);
clk_prepare_enable(i2c_imx->clk);
- writeb(i2c_imx->ifdr, i2c_imx->base + IMX_I2C_IFDR);
+ imx_i2c_write_reg(i2c_imx->ifdr, i2c_imx, IMX_I2C_IFDR);
/* Enable I2C controller */
- writeb(0, i2c_imx->base + IMX_I2C_I2SR);
- writeb(I2CR_IEN, i2c_imx->base + IMX_I2C_I2CR);
+ imx_i2c_write_reg(i2c_imx->hwdata->i2sr_clr_opcode, i2c_imx, IMX_I2C_I2SR);
+ imx_i2c_write_reg(i2c_imx->hwdata->i2cr_ien_opcode, i2c_imx, IMX_I2C_I2CR);
/* Wait controller to be stable */
udelay(50);
/* Start I2C transaction */
- temp = readb(i2c_imx->base + IMX_I2C_I2CR);
+ temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
temp |= I2CR_MSTA;
- writeb(temp, i2c_imx->base + IMX_I2C_I2CR);
+ imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
result = i2c_imx_bus_busy(i2c_imx, 1);
if (result)
return result;
i2c_imx->stopped = 0;
temp |= I2CR_IIEN | I2CR_MTX | I2CR_TXAK;
- writeb(temp, i2c_imx->base + IMX_I2C_I2CR);
+ imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
return result;
}
@@ -242,9 +342,9 @@ static void i2c_imx_stop(struct imx_i2c_struct *i2c_imx)
if (!i2c_imx->stopped) {
/* Stop I2C transaction */
dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__);
- temp = readb(i2c_imx->base + IMX_I2C_I2CR);
+ temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
temp &= ~(I2CR_MSTA | I2CR_MTX);
- writeb(temp, i2c_imx->base + IMX_I2C_I2CR);
+ imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
}
if (is_imx1_i2c(i2c_imx)) {
/*
@@ -260,13 +360,15 @@ static void i2c_imx_stop(struct imx_i2c_struct *i2c_imx)
}
/* Disable I2C controller */
- writeb(0, i2c_imx->base + IMX_I2C_I2CR);
+ temp = i2c_imx->hwdata->i2cr_ien_opcode ^ I2CR_IEN,
+ imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
clk_disable_unprepare(i2c_imx->clk);
}
static void __init i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx,
unsigned int rate)
{
+ struct imx_i2c_clk_pair *i2c_clk_div = i2c_imx->hwdata->clk_div;
unsigned int i2c_clk_rate;
unsigned int div;
int i;
@@ -274,15 +376,15 @@ static void __init i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx,
/* Divider value calculation */
i2c_clk_rate = clk_get_rate(i2c_imx->clk);
div = (i2c_clk_rate + rate - 1) / rate;
- if (div < i2c_clk_div[0][0])
+ if (div < i2c_clk_div[0].div)
i = 0;
- else if (div > i2c_clk_div[ARRAY_SIZE(i2c_clk_div) - 1][0])
- i = ARRAY_SIZE(i2c_clk_div) - 1;
+ else if (div > i2c_clk_div[i2c_imx->hwdata->ndivs - 1].div)
+ i = i2c_imx->hwdata->ndivs - 1;
else
- for (i = 0; i2c_clk_div[i][0] < div; i++);
+ for (i = 0; i2c_clk_div[i].div < div; i++);
/* Store divider value */
- i2c_imx->ifdr = i2c_clk_div[i][1];
+ i2c_imx->ifdr = i2c_clk_div[i].val;
/*
* There dummy delay is calculated.
@@ -290,7 +392,7 @@ static void __init i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx,
* This delay is used in I2C bus disable function
* to fix chip hardware bug.
*/
- i2c_imx->disable_delay = (500000U * i2c_clk_div[i][0]
+ i2c_imx->disable_delay = (500000U * i2c_clk_div[i].div
+ (i2c_clk_rate / 2) - 1) / (i2c_clk_rate / 2);
/* dev_dbg() can't be used, because adapter is not yet registered */
@@ -298,7 +400,7 @@ static void __init i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx,
dev_dbg(&i2c_imx->adapter.dev, "<%s> I2C_CLK=%d, REQ DIV=%d\n",
__func__, i2c_clk_rate, div);
dev_dbg(&i2c_imx->adapter.dev, "<%s> IFDR[IC]=0x%x, REAL DIV=%d\n",
- __func__, i2c_clk_div[i][1], i2c_clk_div[i][0]);
+ __func__, i2c_clk_div[i].val, i2c_clk_div[i].div);
#endif
}
@@ -307,12 +409,13 @@ static irqreturn_t i2c_imx_isr(int irq, void *dev_id)
struct imx_i2c_struct *i2c_imx = dev_id;
unsigned int temp;
- temp = readb(i2c_imx->base + IMX_I2C_I2SR);
+ temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR);
if (temp & I2SR_IIF) {
/* save status register */
i2c_imx->i2csr = temp;
temp &= ~I2SR_IIF;
- writeb(temp, i2c_imx->base + IMX_I2C_I2SR);
+ temp |= (i2c_imx->hwdata->i2sr_clr_opcode & I2SR_IIF);
+ imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2SR);
wake_up(&i2c_imx->queue);
return IRQ_HANDLED;
}
@@ -328,7 +431,7 @@ static int i2c_imx_write(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs)
__func__, msgs->addr << 1);
/* write slave address */
- writeb(msgs->addr << 1, i2c_imx->base + IMX_I2C_I2DR);
+ imx_i2c_write_reg(msgs->addr << 1, i2c_imx, IMX_I2C_I2DR);
result = i2c_imx_trx_complete(i2c_imx);
if (result)
return result;
@@ -342,7 +445,7 @@ static int i2c_imx_write(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs)
dev_dbg(&i2c_imx->adapter.dev,
"<%s> write byte: B%d=0x%X\n",
__func__, i, msgs->buf[i]);
- writeb(msgs->buf[i], i2c_imx->base + IMX_I2C_I2DR);
+ imx_i2c_write_reg(msgs->buf[i], i2c_imx, IMX_I2C_I2DR);
result = i2c_imx_trx_complete(i2c_imx);
if (result)
return result;
@@ -363,7 +466,7 @@ static int i2c_imx_read(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs)
__func__, (msgs->addr << 1) | 0x01);
/* write slave address */
- writeb((msgs->addr << 1) | 0x01, i2c_imx->base + IMX_I2C_I2DR);
+ imx_i2c_write_reg((msgs->addr << 1) | 0x01, i2c_imx, IMX_I2C_I2DR);
result = i2c_imx_trx_complete(i2c_imx);
if (result)
return result;
@@ -374,12 +477,12 @@ static int i2c_imx_read(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs)
dev_dbg(&i2c_imx->adapter.dev, "<%s> setup bus\n", __func__);
/* setup bus to read data */
- temp = readb(i2c_imx->base + IMX_I2C_I2CR);
+ temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
temp &= ~I2CR_MTX;
if (msgs->len - 1)
temp &= ~I2CR_TXAK;
- writeb(temp, i2c_imx->base + IMX_I2C_I2CR);
- readb(i2c_imx->base + IMX_I2C_I2DR); /* dummy read */
+ imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
+ imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR); /* dummy read */
dev_dbg(&i2c_imx->adapter.dev, "<%s> read data\n", __func__);
@@ -393,19 +496,19 @@ static int i2c_imx_read(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs)
controller from generating another clock cycle */
dev_dbg(&i2c_imx->adapter.dev,
"<%s> clear MSTA\n", __func__);
- temp = readb(i2c_imx->base + IMX_I2C_I2CR);
+ temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
temp &= ~(I2CR_MSTA | I2CR_MTX);
- writeb(temp, i2c_imx->base + IMX_I2C_I2CR);
+ imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
i2c_imx_bus_busy(i2c_imx, 0);
i2c_imx->stopped = 1;
} else if (i == (msgs->len - 2)) {
dev_dbg(&i2c_imx->adapter.dev,
"<%s> set TXAK\n", __func__);
- temp = readb(i2c_imx->base + IMX_I2C_I2CR);
+ temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
temp |= I2CR_TXAK;
- writeb(temp, i2c_imx->base + IMX_I2C_I2CR);
+ imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
}
- msgs->buf[i] = readb(i2c_imx->base + IMX_I2C_I2DR);
+ msgs->buf[i] = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR);
dev_dbg(&i2c_imx->adapter.dev,
"<%s> read byte: B%d=0x%X\n",
__func__, i, msgs->buf[i]);
@@ -432,9 +535,9 @@ static int i2c_imx_xfer(struct i2c_adapter *adapter,
if (i) {
dev_dbg(&i2c_imx->adapter.dev,
"<%s> repeated start\n", __func__);
- temp = readb(i2c_imx->base + IMX_I2C_I2CR);
+ temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
temp |= I2CR_RSTA;
- writeb(temp, i2c_imx->base + IMX_I2C_I2CR);
+ imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
result = i2c_imx_bus_busy(i2c_imx, 1);
if (result)
goto fail0;
@@ -443,13 +546,13 @@ static int i2c_imx_xfer(struct i2c_adapter *adapter,
"<%s> transfer message: %d\n", __func__, i);
/* write/read data */
#ifdef CONFIG_I2C_DEBUG_BUS
- temp = readb(i2c_imx->base + IMX_I2C_I2CR);
+ temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
dev_dbg(&i2c_imx->adapter.dev, "<%s> CONTROL: IEN=%d, IIEN=%d, "
"MSTA=%d, MTX=%d, TXAK=%d, RSTA=%d\n", __func__,
(temp & I2CR_IEN ? 1 : 0), (temp & I2CR_IIEN ? 1 : 0),
(temp & I2CR_MSTA ? 1 : 0), (temp & I2CR_MTX ? 1 : 0),
(temp & I2CR_TXAK ? 1 : 0), (temp & I2CR_RSTA ? 1 : 0));
- temp = readb(i2c_imx->base + IMX_I2C_I2SR);
+ temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR);
dev_dbg(&i2c_imx->adapter.dev,
"<%s> STATUS: ICF=%d, IAAS=%d, IBB=%d, "
"IAL=%d, SRW=%d, IIF=%d, RXAK=%d\n", __func__,
@@ -492,7 +595,7 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
&pdev->dev);
struct imx_i2c_struct *i2c_imx;
struct resource *res;
- struct imxi2c_platform_data *pdata = pdev->dev.platform_data;
+ struct imxi2c_platform_data *pdata = dev_get_platdata(&pdev->dev);
void __iomem *base;
int irq, ret;
u32 bitrate;
@@ -518,8 +621,10 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
}
if (of_id)
- pdev->id_entry = of_id->data;
- i2c_imx->devtype = pdev->id_entry->driver_data;
+ i2c_imx->hwdata = of_id->data;
+ else
+ i2c_imx->hwdata = (struct imx_i2c_hwdata *)
+ platform_get_device_id(pdev)->driver_data;
/* Setup i2c_imx driver structure */
strlcpy(i2c_imx->adapter.name, pdev->name, sizeof(i2c_imx->adapter.name));
@@ -537,6 +642,11 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
return PTR_ERR(i2c_imx->clk);
}
+ ret = clk_prepare_enable(i2c_imx->clk);
+ if (ret) {
+ dev_err(&pdev->dev, "can't enable I2C clock\n");
+ return ret;
+ }
/* Request IRQ */
ret = devm_request_irq(&pdev->dev, irq, i2c_imx_isr, 0,
pdev->name, i2c_imx);
@@ -560,8 +670,9 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
i2c_imx_set_clk(i2c_imx, bitrate);
/* Set up chip registers to defaults */
- writeb(0, i2c_imx->base + IMX_I2C_I2CR);
- writeb(0, i2c_imx->base + IMX_I2C_I2SR);
+ imx_i2c_write_reg(i2c_imx->hwdata->i2cr_ien_opcode ^ I2CR_IEN,
+ i2c_imx, IMX_I2C_I2CR);
+ imx_i2c_write_reg(i2c_imx->hwdata->i2sr_clr_opcode, i2c_imx, IMX_I2C_I2SR);
/* Add I2C adapter */
ret = i2c_add_numbered_adapter(&i2c_imx->adapter);
@@ -570,10 +681,9 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
return ret;
}
- of_i2c_register_devices(&i2c_imx->adapter);
-
/* Set up platform driver data */
platform_set_drvdata(pdev, i2c_imx);
+ clk_disable_unprepare(i2c_imx->clk);
dev_dbg(&i2c_imx->adapter.dev, "claimed irq %d\n", irq);
dev_dbg(&i2c_imx->adapter.dev, "device resources from 0x%x to 0x%x\n",
@@ -596,10 +706,10 @@ static int __exit i2c_imx_remove(struct platform_device *pdev)
i2c_del_adapter(&i2c_imx->adapter);
/* setup chip registers to defaults */
- writeb(0, i2c_imx->base + IMX_I2C_IADR);
- writeb(0, i2c_imx->base + IMX_I2C_IFDR);
- writeb(0, i2c_imx->base + IMX_I2C_I2CR);
- writeb(0, i2c_imx->base + IMX_I2C_I2SR);
+ imx_i2c_write_reg(0, i2c_imx, IMX_I2C_IADR);
+ imx_i2c_write_reg(0, i2c_imx, IMX_I2C_IFDR);
+ imx_i2c_write_reg(0, i2c_imx, IMX_I2C_I2CR);
+ imx_i2c_write_reg(0, i2c_imx, IMX_I2C_I2SR);
return 0;
}
diff --git a/drivers/i2c/busses/i2c-ismt.c b/drivers/i2c/busses/i2c-ismt.c
index cd82eb44e4c..8ed79a086f8 100644
--- a/drivers/i2c/busses/i2c-ismt.c
+++ b/drivers/i2c/busses/i2c-ismt.c
@@ -879,6 +879,7 @@ ismt_probe(struct pci_dev *pdev, const struct pci_device_id *id)
DMA_BIT_MASK(32)) != 0)) {
dev_err(&pdev->dev, "pci_set_dma_mask fail %p\n",
pdev);
+ err = -ENODEV;
goto fail;
}
}
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index 7607dc06191..b80c76888ca 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -18,9 +18,9 @@
#include <linux/sched.h>
#include <linux/init.h>
#include <linux/of_platform.h>
-#include <linux/of_i2c.h>
#include <linux/slab.h>
+#include <linux/clk.h>
#include <linux/io.h>
#include <linux/fsl_devices.h>
#include <linux/i2c.h>
@@ -64,9 +64,10 @@ struct mpc_i2c {
struct i2c_adapter adap;
int irq;
u32 real_clk;
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
u8 fdr, dfsrr;
#endif
+ struct clk *clk_per;
};
struct mpc_i2c_divider {
@@ -609,7 +610,6 @@ static const struct i2c_algorithm mpc_algo = {
static struct i2c_adapter mpc_ops = {
.owner = THIS_MODULE,
- .name = "MPC adapter",
.algo = &mpc_algo,
.timeout = HZ,
};
@@ -623,6 +623,9 @@ static int fsl_i2c_probe(struct platform_device *op)
u32 clock = MPC_I2C_CLOCK_LEGACY;
int result = 0;
int plen;
+ struct resource res;
+ struct clk *clk;
+ int err;
match = of_match_device(mpc_i2c_of_match, &op->dev);
if (!match)
@@ -653,6 +656,21 @@ static int fsl_i2c_probe(struct platform_device *op)
}
}
+ /*
+ * enable clock for the I2C peripheral (non fatal),
+ * keep a reference upon successful allocation
+ */
+ clk = devm_clk_get(&op->dev, NULL);
+ if (!IS_ERR(clk)) {
+ err = clk_prepare_enable(clk);
+ if (err) {
+ dev_err(&op->dev, "failed to enable clock\n");
+ goto fail_request;
+ } else {
+ i2c->clk_per = clk;
+ }
+ }
+
if (of_get_property(op->dev.of_node, "fsl,preserve-clocking", NULL)) {
clock = MPC_I2C_CLOCK_PRESERVE;
} else {
@@ -682,6 +700,9 @@ static int fsl_i2c_probe(struct platform_device *op)
platform_set_drvdata(op, i2c);
i2c->adap = mpc_ops;
+ of_address_to_resource(op->dev.of_node, 0, &res);
+ scnprintf(i2c->adap.name, sizeof(i2c->adap.name),
+ "MPC adapter at 0x%llx", (unsigned long long)res.start);
i2c_set_adapdata(&i2c->adap, i2c);
i2c->adap.dev.parent = &op->dev;
i2c->adap.dev.of_node = of_node_get(op->dev.of_node);
@@ -691,11 +712,12 @@ static int fsl_i2c_probe(struct platform_device *op)
dev_err(i2c->dev, "failed to add adapter\n");
goto fail_add;
}
- of_i2c_register_devices(&i2c->adap);
return result;
fail_add:
+ if (i2c->clk_per)
+ clk_disable_unprepare(i2c->clk_per);
free_irq(i2c->irq, i2c);
fail_request:
irq_dispose_mapping(i2c->irq);
@@ -711,6 +733,9 @@ static int fsl_i2c_remove(struct platform_device *op)
i2c_del_adapter(&i2c->adap);
+ if (i2c->clk_per)
+ clk_disable_unprepare(i2c->clk_per);
+
if (i2c->irq)
free_irq(i2c->irq, i2c);
@@ -720,7 +745,7 @@ static int fsl_i2c_remove(struct platform_device *op)
return 0;
};
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
static int mpc_i2c_suspend(struct device *dev)
{
struct mpc_i2c *i2c = dev_get_drvdata(dev);
@@ -741,7 +766,10 @@ static int mpc_i2c_resume(struct device *dev)
return 0;
}
-SIMPLE_DEV_PM_OPS(mpc_i2c_pm_ops, mpc_i2c_suspend, mpc_i2c_resume);
+static SIMPLE_DEV_PM_OPS(mpc_i2c_pm_ops, mpc_i2c_suspend, mpc_i2c_resume);
+#define MPC_I2C_PM_OPS (&mpc_i2c_pm_ops)
+#else
+#define MPC_I2C_PM_OPS NULL
#endif
static const struct mpc_i2c_data mpc_i2c_data_512x = {
@@ -788,9 +816,7 @@ static struct platform_driver mpc_i2c_driver = {
.owner = THIS_MODULE,
.name = DRV_NAME,
.of_match_table = mpc_i2c_of_match,
-#ifdef CONFIG_PM
- .pm = &mpc_i2c_pm_ops,
-#endif
+ .pm = MPC_I2C_PM_OPS,
},
};
diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c
index b1f42bf4096..7f3a4744349 100644
--- a/drivers/i2c/busses/i2c-mv64xxx.c
+++ b/drivers/i2c/busses/i2c-mv64xxx.c
@@ -21,9 +21,9 @@
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/of_irq.h>
-#include <linux/of_i2c.h>
#include <linux/clk.h>
#include <linux/err.h>
+#include <linux/delay.h>
#define MV64XXX_I2C_ADDR_ADDR(val) ((val & 0x7f) << 1)
#define MV64XXX_I2C_BAUD_DIV_N(val) (val & 0x7)
@@ -55,6 +55,32 @@
#define MV64XXX_I2C_STATUS_MAST_RD_ADDR_2_NO_ACK 0xe8
#define MV64XXX_I2C_STATUS_NO_STATUS 0xf8
+/* Register defines (I2C bridge) */
+#define MV64XXX_I2C_REG_TX_DATA_LO 0xc0
+#define MV64XXX_I2C_REG_TX_DATA_HI 0xc4
+#define MV64XXX_I2C_REG_RX_DATA_LO 0xc8
+#define MV64XXX_I2C_REG_RX_DATA_HI 0xcc
+#define MV64XXX_I2C_REG_BRIDGE_CONTROL 0xd0
+#define MV64XXX_I2C_REG_BRIDGE_STATUS 0xd4
+#define MV64XXX_I2C_REG_BRIDGE_INTR_CAUSE 0xd8
+#define MV64XXX_I2C_REG_BRIDGE_INTR_MASK 0xdC
+#define MV64XXX_I2C_REG_BRIDGE_TIMING 0xe0
+
+/* Bridge Control values */
+#define MV64XXX_I2C_BRIDGE_CONTROL_WR 0x00000001
+#define MV64XXX_I2C_BRIDGE_CONTROL_RD 0x00000002
+#define MV64XXX_I2C_BRIDGE_CONTROL_ADDR_SHIFT 2
+#define MV64XXX_I2C_BRIDGE_CONTROL_ADDR_EXT 0x00001000
+#define MV64XXX_I2C_BRIDGE_CONTROL_TX_SIZE_SHIFT 13
+#define MV64XXX_I2C_BRIDGE_CONTROL_RX_SIZE_SHIFT 16
+#define MV64XXX_I2C_BRIDGE_CONTROL_ENABLE 0x00080000
+
+/* Bridge Status values */
+#define MV64XXX_I2C_BRIDGE_STATUS_ERROR 0x00000001
+#define MV64XXX_I2C_STATUS_OFFLOAD_ERROR 0xf0000001
+#define MV64XXX_I2C_STATUS_OFFLOAD_OK 0xf0000000
+
+
/* Driver states */
enum {
MV64XXX_I2C_STATE_INVALID,
@@ -71,14 +97,17 @@ enum {
enum {
MV64XXX_I2C_ACTION_INVALID,
MV64XXX_I2C_ACTION_CONTINUE,
+ MV64XXX_I2C_ACTION_OFFLOAD_SEND_START,
MV64XXX_I2C_ACTION_SEND_START,
MV64XXX_I2C_ACTION_SEND_RESTART,
+ MV64XXX_I2C_ACTION_OFFLOAD_RESTART,
MV64XXX_I2C_ACTION_SEND_ADDR_1,
MV64XXX_I2C_ACTION_SEND_ADDR_2,
MV64XXX_I2C_ACTION_SEND_DATA,
MV64XXX_I2C_ACTION_RCV_DATA,
MV64XXX_I2C_ACTION_RCV_DATA_STOP,
MV64XXX_I2C_ACTION_SEND_STOP,
+ MV64XXX_I2C_ACTION_OFFLOAD_SEND_STOP,
};
struct mv64xxx_i2c_regs {
@@ -117,6 +146,9 @@ struct mv64xxx_i2c_data {
spinlock_t lock;
struct i2c_msg *msg;
struct i2c_adapter adapter;
+ bool offload_enabled;
+/* 5us delay in order to avoid repeated start timing violation */
+ bool errata_delay;
};
static struct mv64xxx_i2c_regs mv64xxx_i2c_regs_mv64xxx = {
@@ -165,6 +197,77 @@ mv64xxx_i2c_prepare_for_io(struct mv64xxx_i2c_data *drv_data,
}
}
+static int mv64xxx_i2c_offload_msg(struct mv64xxx_i2c_data *drv_data)
+{
+ unsigned long data_reg_hi = 0;
+ unsigned long data_reg_lo = 0;
+ unsigned long ctrl_reg;
+ struct i2c_msg *msg = drv_data->msgs;
+
+ drv_data->msg = msg;
+ drv_data->byte_posn = 0;
+ drv_data->bytes_left = msg->len;
+ drv_data->aborting = 0;
+ drv_data->rc = 0;
+ /* Only regular transactions can be offloaded */
+ if ((msg->flags & ~(I2C_M_TEN | I2C_M_RD)) != 0)
+ return -EINVAL;
+
+ /* Only 1-8 byte transfers can be offloaded */
+ if (msg->len < 1 || msg->len > 8)
+ return -EINVAL;
+
+ /* Build transaction */
+ ctrl_reg = MV64XXX_I2C_BRIDGE_CONTROL_ENABLE |
+ (msg->addr << MV64XXX_I2C_BRIDGE_CONTROL_ADDR_SHIFT);
+
+ if ((msg->flags & I2C_M_TEN) != 0)
+ ctrl_reg |= MV64XXX_I2C_BRIDGE_CONTROL_ADDR_EXT;
+
+ if ((msg->flags & I2C_M_RD) == 0) {
+ u8 local_buf[8] = { 0 };
+
+ memcpy(local_buf, msg->buf, msg->len);
+ data_reg_lo = cpu_to_le32(*((u32 *)local_buf));
+ data_reg_hi = cpu_to_le32(*((u32 *)(local_buf+4)));
+
+ ctrl_reg |= MV64XXX_I2C_BRIDGE_CONTROL_WR |
+ (msg->len - 1) << MV64XXX_I2C_BRIDGE_CONTROL_TX_SIZE_SHIFT;
+
+ writel_relaxed(data_reg_lo,
+ drv_data->reg_base + MV64XXX_I2C_REG_TX_DATA_LO);
+ writel_relaxed(data_reg_hi,
+ drv_data->reg_base + MV64XXX_I2C_REG_TX_DATA_HI);
+
+ } else {
+ ctrl_reg |= MV64XXX_I2C_BRIDGE_CONTROL_RD |
+ (msg->len - 1) << MV64XXX_I2C_BRIDGE_CONTROL_RX_SIZE_SHIFT;
+ }
+
+ /* Execute transaction */
+ writel(ctrl_reg, drv_data->reg_base + MV64XXX_I2C_REG_BRIDGE_CONTROL);
+
+ return 0;
+}
+
+static void
+mv64xxx_i2c_update_offload_data(struct mv64xxx_i2c_data *drv_data)
+{
+ struct i2c_msg *msg = drv_data->msg;
+
+ if (msg->flags & I2C_M_RD) {
+ u32 data_reg_lo = readl(drv_data->reg_base +
+ MV64XXX_I2C_REG_RX_DATA_LO);
+ u32 data_reg_hi = readl(drv_data->reg_base +
+ MV64XXX_I2C_REG_RX_DATA_HI);
+ u8 local_buf[8] = { 0 };
+
+ *((u32 *)local_buf) = le32_to_cpu(data_reg_lo);
+ *((u32 *)(local_buf+4)) = le32_to_cpu(data_reg_hi);
+ memcpy(msg->buf, local_buf, msg->len);
+ }
+
+}
/*
*****************************************************************************
*
@@ -177,6 +280,15 @@ mv64xxx_i2c_prepare_for_io(struct mv64xxx_i2c_data *drv_data,
static void
mv64xxx_i2c_hw_init(struct mv64xxx_i2c_data *drv_data)
{
+ if (drv_data->offload_enabled) {
+ writel(0, drv_data->reg_base + MV64XXX_I2C_REG_BRIDGE_CONTROL);
+ writel(0, drv_data->reg_base + MV64XXX_I2C_REG_BRIDGE_TIMING);
+ writel(0, drv_data->reg_base +
+ MV64XXX_I2C_REG_BRIDGE_INTR_CAUSE);
+ writel(0, drv_data->reg_base +
+ MV64XXX_I2C_REG_BRIDGE_INTR_MASK);
+ }
+
writel(0, drv_data->reg_base + drv_data->reg_offsets.soft_reset);
writel(MV64XXX_I2C_BAUD_DIV_M(drv_data->freq_m) | MV64XXX_I2C_BAUD_DIV_N(drv_data->freq_n),
drv_data->reg_base + drv_data->reg_offsets.clock);
@@ -283,6 +395,16 @@ mv64xxx_i2c_fsm(struct mv64xxx_i2c_data *drv_data, u32 status)
drv_data->rc = -ENXIO;
break;
+ case MV64XXX_I2C_STATUS_OFFLOAD_OK:
+ if (drv_data->send_stop || drv_data->aborting) {
+ drv_data->action = MV64XXX_I2C_ACTION_OFFLOAD_SEND_STOP;
+ drv_data->state = MV64XXX_I2C_STATE_IDLE;
+ } else {
+ drv_data->action = MV64XXX_I2C_ACTION_OFFLOAD_RESTART;
+ drv_data->state = MV64XXX_I2C_STATE_WAITING_FOR_RESTART;
+ }
+ break;
+
default:
dev_err(&drv_data->adapter.dev,
"mv64xxx_i2c_fsm: Ctlr Error -- state: 0x%x, "
@@ -299,19 +421,29 @@ static void
mv64xxx_i2c_do_action(struct mv64xxx_i2c_data *drv_data)
{
switch(drv_data->action) {
+ case MV64XXX_I2C_ACTION_OFFLOAD_RESTART:
+ mv64xxx_i2c_update_offload_data(drv_data);
+ writel(0, drv_data->reg_base + MV64XXX_I2C_REG_BRIDGE_CONTROL);
+ writel(0, drv_data->reg_base +
+ MV64XXX_I2C_REG_BRIDGE_INTR_CAUSE);
+ /* FALLTHRU */
case MV64XXX_I2C_ACTION_SEND_RESTART:
/* We should only get here if we have further messages */
BUG_ON(drv_data->num_msgs == 0);
- drv_data->cntl_bits |= MV64XXX_I2C_REG_CONTROL_START;
- writel(drv_data->cntl_bits,
- drv_data->reg_base + drv_data->reg_offsets.control);
-
drv_data->msgs++;
drv_data->num_msgs--;
+ if (!(drv_data->offload_enabled &&
+ mv64xxx_i2c_offload_msg(drv_data))) {
+ drv_data->cntl_bits |= MV64XXX_I2C_REG_CONTROL_START;
+ writel(drv_data->cntl_bits,
+ drv_data->reg_base + drv_data->reg_offsets.control);
- /* Setup for the next message */
- mv64xxx_i2c_prepare_for_io(drv_data, drv_data->msgs);
+ /* Setup for the next message */
+ mv64xxx_i2c_prepare_for_io(drv_data, drv_data->msgs);
+ }
+ if (drv_data->errata_delay)
+ udelay(5);
/*
* We're never at the start of the message here, and by this
@@ -326,6 +458,12 @@ mv64xxx_i2c_do_action(struct mv64xxx_i2c_data *drv_data)
drv_data->reg_base + drv_data->reg_offsets.control);
break;
+ case MV64XXX_I2C_ACTION_OFFLOAD_SEND_START:
+ if (!mv64xxx_i2c_offload_msg(drv_data))
+ break;
+ else
+ drv_data->action = MV64XXX_I2C_ACTION_SEND_START;
+ /* FALLTHRU */
case MV64XXX_I2C_ACTION_SEND_START:
writel(drv_data->cntl_bits | MV64XXX_I2C_REG_CONTROL_START,
drv_data->reg_base + drv_data->reg_offsets.control);
@@ -366,6 +504,9 @@ mv64xxx_i2c_do_action(struct mv64xxx_i2c_data *drv_data)
writel(drv_data->cntl_bits | MV64XXX_I2C_REG_CONTROL_STOP,
drv_data->reg_base + drv_data->reg_offsets.control);
drv_data->block = 0;
+ if (drv_data->errata_delay)
+ udelay(5);
+
wake_up(&drv_data->waitq);
break;
@@ -375,6 +516,7 @@ mv64xxx_i2c_do_action(struct mv64xxx_i2c_data *drv_data)
"mv64xxx_i2c_do_action: Invalid action: %d\n",
drv_data->action);
drv_data->rc = -EIO;
+
/* FALLTHRU */
case MV64XXX_I2C_ACTION_SEND_STOP:
drv_data->cntl_bits &= ~MV64XXX_I2C_REG_CONTROL_INTEN;
@@ -383,6 +525,15 @@ mv64xxx_i2c_do_action(struct mv64xxx_i2c_data *drv_data)
drv_data->block = 0;
wake_up(&drv_data->waitq);
break;
+
+ case MV64XXX_I2C_ACTION_OFFLOAD_SEND_STOP:
+ mv64xxx_i2c_update_offload_data(drv_data);
+ writel(0, drv_data->reg_base + MV64XXX_I2C_REG_BRIDGE_CONTROL);
+ writel(0, drv_data->reg_base +
+ MV64XXX_I2C_REG_BRIDGE_INTR_CAUSE);
+ drv_data->block = 0;
+ wake_up(&drv_data->waitq);
+ break;
}
}
@@ -395,6 +546,21 @@ mv64xxx_i2c_intr(int irq, void *dev_id)
irqreturn_t rc = IRQ_NONE;
spin_lock_irqsave(&drv_data->lock, flags);
+
+ if (drv_data->offload_enabled) {
+ while (readl(drv_data->reg_base +
+ MV64XXX_I2C_REG_BRIDGE_INTR_CAUSE)) {
+ int reg_status = readl(drv_data->reg_base +
+ MV64XXX_I2C_REG_BRIDGE_STATUS);
+ if (reg_status & MV64XXX_I2C_BRIDGE_STATUS_ERROR)
+ status = MV64XXX_I2C_STATUS_OFFLOAD_ERROR;
+ else
+ status = MV64XXX_I2C_STATUS_OFFLOAD_OK;
+ mv64xxx_i2c_fsm(drv_data, status);
+ mv64xxx_i2c_do_action(drv_data);
+ rc = IRQ_HANDLED;
+ }
+ }
while (readl(drv_data->reg_base + drv_data->reg_offsets.control) &
MV64XXX_I2C_REG_CONTROL_IFLG) {
status = readl(drv_data->reg_base + drv_data->reg_offsets.status);
@@ -459,11 +625,15 @@ mv64xxx_i2c_execute_msg(struct mv64xxx_i2c_data *drv_data, struct i2c_msg *msg,
unsigned long flags;
spin_lock_irqsave(&drv_data->lock, flags);
- mv64xxx_i2c_prepare_for_io(drv_data, msg);
-
- drv_data->action = MV64XXX_I2C_ACTION_SEND_START;
- drv_data->state = MV64XXX_I2C_STATE_WAITING_FOR_START_COND;
+ if (drv_data->offload_enabled) {
+ drv_data->action = MV64XXX_I2C_ACTION_OFFLOAD_SEND_START;
+ drv_data->state = MV64XXX_I2C_STATE_WAITING_FOR_START_COND;
+ } else {
+ mv64xxx_i2c_prepare_for_io(drv_data, msg);
+ drv_data->action = MV64XXX_I2C_ACTION_SEND_START;
+ drv_data->state = MV64XXX_I2C_STATE_WAITING_FOR_START_COND;
+ }
drv_data->send_stop = is_last;
drv_data->block = 1;
mv64xxx_i2c_do_action(drv_data);
@@ -521,6 +691,7 @@ static const struct i2c_algorithm mv64xxx_i2c_algo = {
static const struct of_device_id mv64xxx_i2c_of_match_table[] = {
{ .compatible = "allwinner,sun4i-i2c", .data = &mv64xxx_i2c_regs_sun4i},
{ .compatible = "marvell,mv64xxx-i2c", .data = &mv64xxx_i2c_regs_mv64xxx},
+ { .compatible = "marvell,mv78230-i2c", .data = &mv64xxx_i2c_regs_mv64xxx},
{}
};
MODULE_DEVICE_TABLE(of, mv64xxx_i2c_of_match_table);
@@ -601,6 +772,15 @@ mv64xxx_of_config(struct mv64xxx_i2c_data *drv_data,
memcpy(&drv_data->reg_offsets, device->data, sizeof(drv_data->reg_offsets));
+ /*
+ * For controllers embedded in new SoCs activate the
+ * Transaction Generator support and the errata fix.
+ */
+ if (of_device_is_compatible(np, "marvell,mv78230-i2c")) {
+ drv_data->offload_enabled = true;
+ drv_data->errata_delay = true;
+ }
+
out:
return rc;
#endif
@@ -618,7 +798,7 @@ static int
mv64xxx_i2c_probe(struct platform_device *pd)
{
struct mv64xxx_i2c_data *drv_data;
- struct mv64xxx_i2c_pdata *pdata = pd->dev.platform_data;
+ struct mv64xxx_i2c_pdata *pdata = dev_get_platdata(&pd->dev);
struct resource *r;
int rc;
@@ -654,6 +834,7 @@ mv64xxx_i2c_probe(struct platform_device *pd)
drv_data->freq_n = pdata->freq_n;
drv_data->irq = platform_get_irq(pd, 0);
drv_data->adapter.timeout = msecs_to_jiffies(pdata->timeout);
+ drv_data->offload_enabled = false;
memcpy(&drv_data->reg_offsets, &mv64xxx_i2c_regs_mv64xxx, sizeof(drv_data->reg_offsets));
} else if (pd->dev.of_node) {
rc = mv64xxx_of_config(drv_data, &pd->dev);
@@ -689,8 +870,6 @@ mv64xxx_i2c_probe(struct platform_device *pd)
goto exit_free_irq;
}
- of_i2c_register_devices(&drv_data->adapter);
-
return 0;
exit_free_irq:
diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c
index e2e9a0dade9..f4a01675fa7 100644
--- a/drivers/i2c/busses/i2c-mxs.c
+++ b/drivers/i2c/busses/i2c-mxs.c
@@ -27,7 +27,6 @@
#include <linux/stmp_device.h>
#include <linux/of.h>
#include <linux/of_device.h>
-#include <linux/of_i2c.h>
#include <linux/dma-mapping.h>
#include <linux/dmaengine.h>
@@ -114,18 +113,21 @@ struct mxs_i2c_dev {
uint32_t timing0;
uint32_t timing1;
+ uint32_t timing2;
/* DMA support components */
- struct dma_chan *dmach;
+ struct dma_chan *dmach;
uint32_t pio_data[2];
uint32_t addr_data;
struct scatterlist sg_io[2];
bool dma_read;
};
-static void mxs_i2c_reset(struct mxs_i2c_dev *i2c)
+static int mxs_i2c_reset(struct mxs_i2c_dev *i2c)
{
- stmp_reset_block(i2c->regs);
+ int ret = stmp_reset_block(i2c->regs);
+ if (ret)
+ return ret;
/*
* Configure timing for the I2C block. The I2C TIMING2 register has to
@@ -136,9 +138,11 @@ static void mxs_i2c_reset(struct mxs_i2c_dev *i2c)
*/
writel(i2c->timing0, i2c->regs + MXS_I2C_TIMING0);
writel(i2c->timing1, i2c->regs + MXS_I2C_TIMING1);
- writel(0x00300030, i2c->regs + MXS_I2C_TIMING2);
+ writel(i2c->timing2, i2c->regs + MXS_I2C_TIMING2);
writel(MXS_I2C_IRQ_MASK << 8, i2c->regs + MXS_I2C_CTRL1_SET);
+
+ return 0;
}
static void mxs_i2c_dma_finish(struct mxs_i2c_dev *i2c)
@@ -475,7 +479,7 @@ static int mxs_i2c_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg,
int stop)
{
struct mxs_i2c_dev *i2c = i2c_get_adapdata(adap);
- int ret;
+ int ret, err;
int flags;
flags = stop ? MXS_I2C_CTRL0_POST_SEND_STOP : 0;
@@ -495,8 +499,11 @@ static int mxs_i2c_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg,
i2c->cmd_err = 0;
if (0) { /* disable PIO mode until a proper fix is made */
ret = mxs_i2c_pio_setup_xfer(adap, msg, flags);
- if (ret)
- mxs_i2c_reset(i2c);
+ if (ret) {
+ err = mxs_i2c_reset(i2c);
+ if (err)
+ return err;
+ }
} else {
INIT_COMPLETION(i2c->cmd_complete);
ret = mxs_i2c_dma_setup_xfer(adap, msg, flags);
@@ -527,7 +534,10 @@ static int mxs_i2c_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg,
timeout:
dev_dbg(i2c->dev, "Timeout!\n");
mxs_i2c_dma_finish(i2c);
- mxs_i2c_reset(i2c);
+ ret = mxs_i2c_reset(i2c);
+ if (ret)
+ return ret;
+
return -ETIMEDOUT;
}
@@ -577,41 +587,79 @@ static const struct i2c_algorithm mxs_i2c_algo = {
.functionality = mxs_i2c_func,
};
-static void mxs_i2c_derive_timing(struct mxs_i2c_dev *i2c, int speed)
+static void mxs_i2c_derive_timing(struct mxs_i2c_dev *i2c, uint32_t speed)
{
- /* The I2C block clock run at 24MHz */
+ /* The I2C block clock runs at 24MHz */
const uint32_t clk = 24000000;
- uint32_t base;
+ uint32_t divider;
uint16_t high_count, low_count, rcv_count, xmit_count;
+ uint32_t bus_free, leadin;
struct device *dev = i2c->dev;
- if (speed > 540000) {
- dev_warn(dev, "Speed too high (%d Hz), using 540 kHz\n", speed);
- speed = 540000;
- } else if (speed < 12000) {
- dev_warn(dev, "Speed too low (%d Hz), using 12 kHz\n", speed);
- speed = 12000;
+ divider = DIV_ROUND_UP(clk, speed);
+
+ if (divider < 25) {
+ /*
+ * limit the divider, so that min(low_count, high_count)
+ * is >= 1
+ */
+ divider = 25;
+ dev_warn(dev,
+ "Speed too high (%u.%03u kHz), using %u.%03u kHz\n",
+ speed / 1000, speed % 1000,
+ clk / divider / 1000, clk / divider % 1000);
+ } else if (divider > 1897) {
+ /*
+ * limit the divider, so that max(low_count, high_count)
+ * cannot exceed 1023
+ */
+ divider = 1897;
+ dev_warn(dev,
+ "Speed too low (%u.%03u kHz), using %u.%03u kHz\n",
+ speed / 1000, speed % 1000,
+ clk / divider / 1000, clk / divider % 1000);
}
/*
- * The timing derivation algorithm. There is no documentation for this
- * algorithm available, it was derived by using the scope and fiddling
- * with constants until the result observed on the scope was good enough
- * for 20kHz, 50kHz, 100kHz, 200kHz, 300kHz and 400kHz. It should be
- * possible to assume the algorithm works for other frequencies as well.
+ * The I2C spec specifies the following timing data:
+ * standard mode fast mode Bitfield name
+ * tLOW (SCL LOW period) 4700 ns 1300 ns
+ * tHIGH (SCL HIGH period) 4000 ns 600 ns
+ * tSU;DAT (data setup time) 250 ns 100 ns
+ * tHD;STA (START hold time) 4000 ns 600 ns
+ * tBUF (bus free time) 4700 ns 1300 ns
*
- * Note it was necessary to cap the frequency on both ends as it's not
- * possible to configure completely arbitrary frequency for the I2C bus
- * clock.
+ * The hardware (of the i.MX28 at least) seems to add 2 additional
+ * clock cycles to the low_count and 7 cycles to the high_count.
+ * This is compensated for by subtracting the respective constants
+ * from the values written to the timing registers.
*/
- base = ((clk / speed) - 38) / 2;
- high_count = base + 3;
- low_count = base - 3;
- rcv_count = (high_count * 3) / 4;
- xmit_count = low_count / 4;
+ if (speed > 100000) {
+ /* fast mode */
+ low_count = DIV_ROUND_CLOSEST(divider * 13, (13 + 6));
+ high_count = DIV_ROUND_CLOSEST(divider * 6, (13 + 6));
+ leadin = DIV_ROUND_UP(600 * (clk / 1000000), 1000);
+ bus_free = DIV_ROUND_UP(1300 * (clk / 1000000), 1000);
+ } else {
+ /* normal mode */
+ low_count = DIV_ROUND_CLOSEST(divider * 47, (47 + 40));
+ high_count = DIV_ROUND_CLOSEST(divider * 40, (47 + 40));
+ leadin = DIV_ROUND_UP(4700 * (clk / 1000000), 1000);
+ bus_free = DIV_ROUND_UP(4700 * (clk / 1000000), 1000);
+ }
+ rcv_count = high_count * 3 / 8;
+ xmit_count = low_count * 3 / 8;
+
+ dev_dbg(dev,
+ "speed=%u(actual %u) divider=%u low=%u high=%u xmit=%u rcv=%u leadin=%u bus_free=%u\n",
+ speed, clk / divider, divider, low_count, high_count,
+ xmit_count, rcv_count, leadin, bus_free);
+ low_count -= 2;
+ high_count -= 7;
i2c->timing0 = (high_count << 16) | rcv_count;
i2c->timing1 = (low_count << 16) | xmit_count;
+ i2c->timing2 = (bus_free << 16 | leadin);
}
static int mxs_i2c_get_ofdata(struct mxs_i2c_dev *i2c)
@@ -683,7 +731,9 @@ static int mxs_i2c_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, i2c);
/* Do reset to enforce correct startup after pinmuxing */
- mxs_i2c_reset(i2c);
+ err = mxs_i2c_reset(i2c);
+ if (err)
+ return err;
adap = &i2c->adapter;
strlcpy(adap->name, "MXS I2C adapter", sizeof(adap->name));
@@ -701,8 +751,6 @@ static int mxs_i2c_probe(struct platform_device *pdev)
return err;
}
- of_i2c_register_devices(adap);
-
return 0;
}
diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c
index 512dfe60970..8bf9ac01301 100644
--- a/drivers/i2c/busses/i2c-nomadik.c
+++ b/drivers/i2c/busses/i2c-nomadik.c
@@ -24,7 +24,6 @@
#include <linux/pm_runtime.h>
#include <linux/platform_data/i2c-nomadik.h>
#include <linux/of.h>
-#include <linux/of_i2c.h>
#include <linux/pinctrl/consumer.h>
#define DRIVER_NAME "nmk-i2c"
@@ -943,7 +942,7 @@ static void nmk_i2c_of_probe(struct device_node *np,
static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id)
{
int ret = 0;
- struct nmk_i2c_controller *pdata = adev->dev.platform_data;
+ struct nmk_i2c_controller *pdata = dev_get_platdata(&adev->dev);
struct device_node *np = adev->dev.of_node;
struct nmk_i2c_dev *dev;
struct i2c_adapter *adap;
@@ -1045,8 +1044,6 @@ static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id)
goto err_add_adap;
}
- of_i2c_register_devices(adap);
-
pm_runtime_put(&adev->dev);
return 0;
diff --git a/drivers/i2c/busses/i2c-nuc900.c b/drivers/i2c/busses/i2c-nuc900.c
index 865ee350adb..36394d737fa 100644
--- a/drivers/i2c/busses/i2c-nuc900.c
+++ b/drivers/i2c/busses/i2c-nuc900.c
@@ -525,7 +525,7 @@ static int nuc900_i2c_probe(struct platform_device *pdev)
struct resource *res;
int ret;
- pdata = pdev->dev.platform_data;
+ pdata = dev_get_platdata(&pdev->dev);
if (!pdata) {
dev_err(&pdev->dev, "no platform data\n");
return -EINVAL;
diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c
index 0e1f8245e76..c61f37a10a0 100644
--- a/drivers/i2c/busses/i2c-ocores.c
+++ b/drivers/i2c/busses/i2c-ocores.c
@@ -24,7 +24,6 @@
#include <linux/i2c-ocores.h>
#include <linux/slab.h>
#include <linux/io.h>
-#include <linux/of_i2c.h>
#include <linux/log2.h>
struct ocores_i2c {
@@ -353,10 +352,6 @@ static int ocores_i2c_probe(struct platform_device *pdev)
int ret;
int i;
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res)
- return -ENODEV;
-
irq = platform_get_irq(pdev, 0);
if (irq < 0)
return irq;
@@ -365,11 +360,12 @@ static int ocores_i2c_probe(struct platform_device *pdev)
if (!i2c)
return -ENOMEM;
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
i2c->base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(i2c->base))
return PTR_ERR(i2c->base);
- pdata = pdev->dev.platform_data;
+ pdata = dev_get_platdata(&pdev->dev);
if (pdata) {
i2c->reg_shift = pdata->reg_shift;
i2c->reg_io_width = pdata->reg_io_width;
@@ -435,8 +431,6 @@ static int ocores_i2c_probe(struct platform_device *pdev)
if (pdata) {
for (i = 0; i < pdata->num_devices; i++)
i2c_new_device(&i2c->adap, pdata->devices + i);
- } else {
- of_i2c_register_devices(&i2c->adap);
}
return 0;
@@ -456,7 +450,7 @@ static int ocores_i2c_remove(struct platform_device *pdev)
return 0;
}
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
static int ocores_i2c_suspend(struct device *dev)
{
struct ocores_i2c *i2c = dev_get_drvdata(dev);
diff --git a/drivers/i2c/busses/i2c-octeon.c b/drivers/i2c/busses/i2c-octeon.c
index 956fe320f31..b929ba271b4 100644
--- a/drivers/i2c/busses/i2c-octeon.c
+++ b/drivers/i2c/busses/i2c-octeon.c
@@ -15,7 +15,6 @@
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/of_i2c.h>
#include <linux/delay.h>
#include <linux/sched.h>
#include <linux/slab.h>
@@ -599,8 +598,6 @@ static int octeon_i2c_probe(struct platform_device *pdev)
}
dev_info(i2c->dev, "version %s\n", DRV_VERSION);
- of_i2c_register_devices(&i2c->adap);
-
return 0;
out:
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 142b694d1c6..6d8308d5dc4 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -38,12 +38,10 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/of.h>
-#include <linux/of_i2c.h>
#include <linux/of_device.h>
#include <linux/slab.h>
#include <linux/i2c-omap.h>
#include <linux/pm_runtime.h>
-#include <linux/pinctrl/consumer.h>
/* I2C controller revisions */
#define OMAP_I2C_OMAP1_REV_2 0x20
@@ -216,8 +214,6 @@ struct omap_i2c_dev {
u16 syscstate;
u16 westate;
u16 errata;
-
- struct pinctrl *pins;
};
static const u8 reg_map_ip_v1[] = {
@@ -618,11 +614,10 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adap,
if (dev->cmd_err & OMAP_I2C_STAT_NACK) {
if (msg->flags & I2C_M_IGNORE_NAK)
return 0;
- if (stop) {
- w = omap_i2c_read_reg(dev, OMAP_I2C_CON_REG);
- w |= OMAP_I2C_CON_STP;
- omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, w);
- }
+
+ w = omap_i2c_read_reg(dev, OMAP_I2C_CON_REG);
+ w |= OMAP_I2C_CON_STP;
+ omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, w);
return -EREMOTEIO;
}
return -EIO;
@@ -1079,7 +1074,7 @@ omap_i2c_probe(struct platform_device *pdev)
struct i2c_adapter *adap;
struct resource *mem;
const struct omap_i2c_bus_platform_data *pdata =
- pdev->dev.platform_data;
+ dev_get_platdata(&pdev->dev);
struct device_node *node = pdev->dev.of_node;
const struct of_device_id *match;
int irq;
@@ -1120,16 +1115,6 @@ omap_i2c_probe(struct platform_device *pdev)
dev->set_mpu_wkup_lat = pdata->set_mpu_wkup_lat;
}
- dev->pins = devm_pinctrl_get_select_default(&pdev->dev);
- if (IS_ERR(dev->pins)) {
- if (PTR_ERR(dev->pins) == -EPROBE_DEFER)
- return -EPROBE_DEFER;
-
- dev_warn(&pdev->dev, "did not get pins for i2c error: %li\n",
- PTR_ERR(dev->pins));
- dev->pins = NULL;
- }
-
dev->dev = &pdev->dev;
dev->irq = irq;
@@ -1245,8 +1230,6 @@ omap_i2c_probe(struct platform_device *pdev)
dev_info(dev->dev, "bus %d rev%d.%d at %d kHz\n", adap->nr,
major, minor, dev->speed);
- of_i2c_register_devices(adap);
-
pm_runtime_mark_last_busy(dev->dev);
pm_runtime_put_autosuspend(dev->dev);
diff --git a/drivers/i2c/busses/i2c-pca-platform.c b/drivers/i2c/busses/i2c-pca-platform.c
index aa00df14e30..39e2755e3f2 100644
--- a/drivers/i2c/busses/i2c-pca-platform.c
+++ b/drivers/i2c/busses/i2c-pca-platform.c
@@ -136,7 +136,7 @@ static int i2c_pca_pf_probe(struct platform_device *pdev)
struct i2c_pca_pf_data *i2c;
struct resource *res;
struct i2c_pca9564_pf_platform_data *platform_data =
- pdev->dev.platform_data;
+ dev_get_platdata(&pdev->dev);
int ret = 0;
int irq;
diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
index d05ad590af2..a028617b8f1 100644
--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -231,11 +231,11 @@ static int piix4_setup(struct pci_dev *PIIX4_dev,
}
static int piix4_setup_sb800(struct pci_dev *PIIX4_dev,
- const struct pci_device_id *id)
+ const struct pci_device_id *id, u8 aux)
{
unsigned short piix4_smba;
unsigned short smba_idx = 0xcd6;
- u8 smba_en_lo, smba_en_hi, i2ccfg, i2ccfg_offset = 0x10, smb_en = 0x2c;
+ u8 smba_en_lo, smba_en_hi, i2ccfg, i2ccfg_offset = 0x10, smb_en;
/* SB800 and later SMBus does not support forcing address */
if (force || force_addr) {
@@ -245,6 +245,8 @@ static int piix4_setup_sb800(struct pci_dev *PIIX4_dev,
}
/* Determine the address of the SMBus areas */
+ smb_en = (aux) ? 0x28 : 0x2c;
+
if (!request_region(smba_idx, 2, "smba_idx")) {
dev_err(&PIIX4_dev->dev, "SMBus base address index region "
"0x%x already in use!\n", smba_idx);
@@ -272,6 +274,13 @@ static int piix4_setup_sb800(struct pci_dev *PIIX4_dev,
return -EBUSY;
}
+ /* Aux SMBus does not support IRQ information */
+ if (aux) {
+ dev_info(&PIIX4_dev->dev,
+ "SMBus Host Controller at 0x%x\n", piix4_smba);
+ return piix4_smba;
+ }
+
/* Request the SMBus I2C bus config region */
if (!request_region(piix4_smba + i2ccfg_offset, 1, "i2ccfg")) {
dev_err(&PIIX4_dev->dev, "SMBus I2C bus config region "
@@ -597,7 +606,7 @@ static int piix4_probe(struct pci_dev *dev, const struct pci_device_id *id)
dev->revision >= 0x40) ||
dev->vendor == PCI_VENDOR_ID_AMD)
/* base address location etc changed in SB800 */
- retval = piix4_setup_sb800(dev, id);
+ retval = piix4_setup_sb800(dev, id, 0);
else
retval = piix4_setup(dev, id);
@@ -611,17 +620,29 @@ static int piix4_probe(struct pci_dev *dev, const struct pci_device_id *id)
return retval;
/* Check for auxiliary SMBus on some AMD chipsets */
+ retval = -ENODEV;
+
if (dev->vendor == PCI_VENDOR_ID_ATI &&
- dev->device == PCI_DEVICE_ID_ATI_SBX00_SMBUS &&
- dev->revision < 0x40) {
- retval = piix4_setup_aux(dev, id, 0x58);
- if (retval > 0) {
- /* Try to add the aux adapter if it exists,
- * piix4_add_adapter will clean up if this fails */
- piix4_add_adapter(dev, retval, &piix4_aux_adapter);
+ dev->device == PCI_DEVICE_ID_ATI_SBX00_SMBUS) {
+ if (dev->revision < 0x40) {
+ retval = piix4_setup_aux(dev, id, 0x58);
+ } else {
+ /* SB800 added aux bus too */
+ retval = piix4_setup_sb800(dev, id, 1);
}
}
+ if (dev->vendor == PCI_VENDOR_ID_AMD &&
+ dev->device == PCI_DEVICE_ID_AMD_HUDSON2_SMBUS) {
+ retval = piix4_setup_sb800(dev, id, 1);
+ }
+
+ if (retval > 0) {
+ /* Try to add the aux adapter if it exists,
+ * piix4_add_adapter will clean up if this fails */
+ piix4_add_adapter(dev, retval, &piix4_aux_adapter);
+ }
+
return 0;
}
diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c
index 5f39c6d8117..1a9ea25f231 100644
--- a/drivers/i2c/busses/i2c-pnx.c
+++ b/drivers/i2c/busses/i2c-pnx.c
@@ -23,7 +23,6 @@
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/slab.h>
-#include <linux/of_i2c.h>
#define I2C_PNX_TIMEOUT_DEFAULT 10 /* msec */
#define I2C_PNX_SPEED_KHZ_DEFAULT 100
@@ -595,7 +594,7 @@ static struct i2c_algorithm pnx_algorithm = {
.functionality = i2c_pnx_func,
};
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
static int i2c_pnx_controller_suspend(struct device *dev)
{
struct i2c_pnx_algo_data *alg_data = dev_get_drvdata(dev);
@@ -727,7 +726,8 @@ static int i2c_pnx_probe(struct platform_device *pdev)
alg_data->irq = platform_get_irq(pdev, 0);
if (alg_data->irq < 0) {
dev_err(&pdev->dev, "Failed to get IRQ from platform resource\n");
- goto out_irq;
+ ret = alg_data->irq;
+ goto out_clock;
}
ret = request_irq(alg_data->irq, i2c_pnx_interrupt,
0, pdev->name, alg_data);
@@ -741,8 +741,6 @@ static int i2c_pnx_probe(struct platform_device *pdev)
goto out_irq;
}
- of_i2c_register_devices(&alg_data->adapter);
-
dev_dbg(&pdev->dev, "%s: Master at %#8x, irq %d.\n",
alg_data->adapter.name, res->start, alg_data->irq);
diff --git a/drivers/i2c/busses/i2c-powermac.c b/drivers/i2c/busses/i2c-powermac.c
index 8dc90da1e6e..37e8cfad625 100644
--- a/drivers/i2c/busses/i2c-powermac.c
+++ b/drivers/i2c/busses/i2c-powermac.c
@@ -398,7 +398,7 @@ static void i2c_powermac_register_devices(struct i2c_adapter *adap,
static int i2c_powermac_probe(struct platform_device *dev)
{
- struct pmac_i2c_bus *bus = dev->dev.platform_data;
+ struct pmac_i2c_bus *bus = dev_get_platdata(&dev->dev);
struct device_node *parent = NULL;
struct i2c_adapter *adapter;
const char *basename;
@@ -440,22 +440,24 @@ static int i2c_powermac_probe(struct platform_device *dev)
adapter->algo = &i2c_powermac_algorithm;
i2c_set_adapdata(adapter, bus);
adapter->dev.parent = &dev->dev;
- adapter->dev.of_node = dev->dev.of_node;
+
+ /* Clear of_node to skip automatic registration of i2c child nodes */
+ adapter->dev.of_node = NULL;
rc = i2c_add_adapter(adapter);
if (rc) {
printk(KERN_ERR "i2c-powermac: Adapter %s registration "
"failed\n", adapter->name);
memset(adapter, 0, sizeof(*adapter));
+ return rc;
}
printk(KERN_INFO "PowerMac i2c bus %s registered\n", adapter->name);
- /* Cannot use of_i2c_register_devices() due to Apple device-tree
- * funkyness
- */
+ /* Use custom child registration due to Apple device-tree funkyness */
+ adapter->dev.of_node = dev->dev.of_node;
i2c_powermac_register_devices(adapter, bus);
- return rc;
+ return 0;
}
static struct platform_driver i2c_powermac_driver = {
diff --git a/drivers/i2c/busses/i2c-puv3.c b/drivers/i2c/busses/i2c-puv3.c
index 37a84c87c5f..ac80199885b 100644
--- a/drivers/i2c/busses/i2c-puv3.c
+++ b/drivers/i2c/busses/i2c-puv3.c
@@ -245,7 +245,7 @@ static int puv3_i2c_remove(struct platform_device *pdev)
return 0;
}
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
static int puv3_i2c_suspend(struct device *dev)
{
int poll_count;
diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index fbafed29fb8..bbe6dfbc5c0 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -31,7 +31,6 @@
#include <linux/i2c-pxa.h>
#include <linux/of.h>
#include <linux/of_device.h>
-#include <linux/of_i2c.h>
#include <linux/platform_device.h>
#include <linux/err.h>
#include <linux/clk.h>
@@ -110,6 +109,8 @@ MODULE_DEVICE_TABLE(platform, i2c_pxa_id_table);
#define ICR_SADIE (1 << 13) /* slave address detected int enable */
#define ICR_UR (1 << 14) /* unit reset */
#define ICR_FM (1 << 15) /* fast mode */
+#define ICR_HS (1 << 16) /* High Speed mode */
+#define ICR_GPIOEN (1 << 19) /* enable GPIO mode for SCL in HS */
#define ISR_RWM (1 << 0) /* read/write mode */
#define ISR_ACKNAK (1 << 1) /* ack/nak status */
@@ -155,6 +156,10 @@ struct pxa_i2c {
int irq;
unsigned int use_pio :1;
unsigned int fast_mode :1;
+ unsigned int high_mode:1;
+ unsigned char master_code;
+ unsigned long rate;
+ bool highmode_enter;
};
#define _IBMR(i2c) ((i2c)->reg_ibmr)
@@ -459,6 +464,7 @@ static void i2c_pxa_reset(struct pxa_i2c *i2c)
/* set control register values */
writel(I2C_ICR_INIT | (i2c->fast_mode ? ICR_FM : 0), _ICR(i2c));
+ writel(readl(_ICR(i2c)) | (i2c->high_mode ? ICR_HS : 0), _ICR(i2c));
#ifdef CONFIG_I2C_PXA_SLAVE
dev_info(&i2c->adap.dev, "Enabling slave mode\n");
@@ -680,6 +686,34 @@ static int i2c_pxa_pio_set_master(struct pxa_i2c *i2c)
return 0;
}
+/*
+ * PXA I2C send master code
+ * 1. Load master code to IDBR and send it.
+ * Note for HS mode, set ICR [GPIOEN].
+ * 2. Wait until win arbitration.
+ */
+static int i2c_pxa_send_mastercode(struct pxa_i2c *i2c)
+{
+ u32 icr;
+ long timeout;
+
+ spin_lock_irq(&i2c->lock);
+ i2c->highmode_enter = true;
+ writel(i2c->master_code, _IDBR(i2c));
+
+ icr = readl(_ICR(i2c)) & ~(ICR_STOP | ICR_ALDIE);
+ icr |= ICR_GPIOEN | ICR_START | ICR_TB | ICR_ITEIE;
+ writel(icr, _ICR(i2c));
+
+ spin_unlock_irq(&i2c->lock);
+ timeout = wait_event_timeout(i2c->wait,
+ i2c->highmode_enter == false, HZ * 1);
+
+ i2c->highmode_enter = false;
+
+ return (timeout == 0) ? I2C_RETRY : 0;
+}
+
static int i2c_pxa_do_pio_xfer(struct pxa_i2c *i2c,
struct i2c_msg *msg, int num)
{
@@ -743,6 +777,14 @@ static int i2c_pxa_do_xfer(struct pxa_i2c *i2c, struct i2c_msg *msg, int num)
goto out;
}
+ if (i2c->high_mode) {
+ ret = i2c_pxa_send_mastercode(i2c);
+ if (ret) {
+ dev_err(&i2c->adap.dev, "i2c_pxa_send_mastercode timeout\n");
+ goto out;
+ }
+ }
+
spin_lock_irq(&i2c->lock);
i2c->msg = msg;
@@ -990,11 +1032,14 @@ static irqreturn_t i2c_pxa_handler(int this_irq, void *dev_id)
i2c_pxa_slave_txempty(i2c, isr);
if (isr & ISR_IRF)
i2c_pxa_slave_rxfull(i2c, isr);
- } else if (i2c->msg) {
+ } else if (i2c->msg && (!i2c->highmode_enter)) {
if (isr & ISR_ITE)
i2c_pxa_irq_txempty(i2c, isr);
if (isr & ISR_IRF)
i2c_pxa_irq_rxfull(i2c, isr);
+ } else if ((isr & ISR_ITE) && i2c->highmode_enter) {
+ i2c->highmode_enter = false;
+ wake_up(&i2c->wait);
} else {
i2c_pxa_scream_blue_murder(i2c, "spurious irq");
}
@@ -1072,20 +1117,25 @@ static int i2c_pxa_probe_pdata(struct platform_device *pdev,
struct pxa_i2c *i2c,
enum pxa_i2c_types *i2c_types)
{
- struct i2c_pxa_platform_data *plat = pdev->dev.platform_data;
+ struct i2c_pxa_platform_data *plat = dev_get_platdata(&pdev->dev);
const struct platform_device_id *id = platform_get_device_id(pdev);
*i2c_types = id->driver_data;
if (plat) {
i2c->use_pio = plat->use_pio;
i2c->fast_mode = plat->fast_mode;
+ i2c->high_mode = plat->high_mode;
+ i2c->master_code = plat->master_code;
+ if (!i2c->master_code)
+ i2c->master_code = 0xe;
+ i2c->rate = plat->rate;
}
return 0;
}
static int i2c_pxa_probe(struct platform_device *dev)
{
- struct i2c_pxa_platform_data *plat = dev->dev.platform_data;
+ struct i2c_pxa_platform_data *plat = dev_get_platdata(&dev->dev);
enum pxa_i2c_types i2c_type;
struct pxa_i2c *i2c;
struct resource *res = NULL;
@@ -1151,6 +1201,7 @@ static int i2c_pxa_probe(struct platform_device *dev)
i2c->irq = irq;
i2c->slave_addr = I2C_PXA_SLAVE_ADDR;
+ i2c->highmode_enter = false;
if (plat) {
#ifdef CONFIG_I2C_PXA_SLAVE
@@ -1160,6 +1211,16 @@ static int i2c_pxa_probe(struct platform_device *dev)
i2c->adap.class = plat->class;
}
+ if (i2c->high_mode) {
+ if (i2c->rate) {
+ clk_set_rate(i2c->clk, i2c->rate);
+ pr_info("i2c: <%s> set rate to %ld\n",
+ i2c->adap.name, clk_get_rate(i2c->clk));
+ } else
+ pr_warn("i2c: <%s> clock rate not set\n",
+ i2c->adap.name);
+ }
+
clk_prepare_enable(i2c->clk);
if (i2c->use_pio) {
@@ -1185,7 +1246,6 @@ static int i2c_pxa_probe(struct platform_device *dev)
printk(KERN_INFO "I2C: Failed to add bus\n");
goto eadapt;
}
- of_i2c_register_devices(&i2c->adap);
platform_set_drvdata(dev, i2c);
diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c
index 0fc58586161..d2fe11da5e8 100644
--- a/drivers/i2c/busses/i2c-rcar.c
+++ b/drivers/i2c/busses/i2c-rcar.c
@@ -101,6 +101,11 @@ enum {
#define ID_ARBLOST (1 << 3)
#define ID_NACK (1 << 4)
+enum rcar_i2c_type {
+ I2C_RCAR_H1,
+ I2C_RCAR_H2,
+};
+
struct rcar_i2c_priv {
void __iomem *io;
struct i2c_adapter adap;
@@ -113,6 +118,7 @@ struct rcar_i2c_priv {
int irq;
u32 icccr;
u32 flags;
+ enum rcar_i2c_type devtype;
};
#define rcar_i2c_priv_to_dev(p) ((p)->adap.dev.parent)
@@ -224,12 +230,25 @@ static int rcar_i2c_clock_calculate(struct rcar_i2c_priv *priv,
u32 scgd, cdf;
u32 round, ick;
u32 scl;
+ u32 cdf_width;
if (!clkp) {
dev_err(dev, "there is no peripheral_clk\n");
return -EIO;
}
+ switch (priv->devtype) {
+ case I2C_RCAR_H1:
+ cdf_width = 2;
+ break;
+ case I2C_RCAR_H2:
+ cdf_width = 3;
+ break;
+ default:
+ dev_err(dev, "device type error\n");
+ return -EIO;
+ }
+
/*
* calculate SCL clock
* see
@@ -245,7 +264,7 @@ static int rcar_i2c_clock_calculate(struct rcar_i2c_priv *priv,
* clkp : peripheral_clk
* F[] : integer up-valuation
*/
- for (cdf = 0; cdf < 4; cdf++) {
+ for (cdf = 0; cdf < (1 << cdf_width); cdf++) {
ick = clk_get_rate(clkp) / (1 + cdf);
if (ick < 20000000)
goto ick_find;
@@ -287,7 +306,7 @@ scgd_find:
/*
* keep icccr value
*/
- priv->icccr = (scgd << 2 | cdf);
+ priv->icccr = (scgd << (cdf_width) | cdf);
return 0;
}
@@ -615,7 +634,7 @@ static const struct i2c_algorithm rcar_i2c_algo = {
static int rcar_i2c_probe(struct platform_device *pdev)
{
- struct i2c_rcar_platform_data *pdata = pdev->dev.platform_data;
+ struct i2c_rcar_platform_data *pdata = dev_get_platdata(&pdev->dev);
struct rcar_i2c_priv *priv;
struct i2c_adapter *adap;
struct resource *res;
@@ -632,6 +651,9 @@ static int rcar_i2c_probe(struct platform_device *pdev)
bus_speed = 100000; /* default 100 kHz */
if (pdata && pdata->bus_speed)
bus_speed = pdata->bus_speed;
+
+ priv->devtype = platform_get_device_id(pdev)->driver_data;
+
ret = rcar_i2c_clock_calculate(priv, bus_speed, dev);
if (ret < 0)
return ret;
@@ -686,6 +708,14 @@ static int rcar_i2c_remove(struct platform_device *pdev)
return 0;
}
+static struct platform_device_id rcar_i2c_id_table[] = {
+ { "i2c-rcar", I2C_RCAR_H1 },
+ { "i2c-rcar_h1", I2C_RCAR_H1 },
+ { "i2c-rcar_h2", I2C_RCAR_H2 },
+ {},
+};
+MODULE_DEVICE_TABLE(platform, rcar_i2c_id_table);
+
static struct platform_driver rcar_i2c_driver = {
.driver = {
.name = "i2c-rcar",
@@ -693,6 +723,7 @@ static struct platform_driver rcar_i2c_driver = {
},
.probe = rcar_i2c_probe,
.remove = rcar_i2c_remove,
+ .id_table = rcar_i2c_id_table,
};
module_platform_driver(rcar_i2c_driver);
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index cab1c91b75a..3535f3c0f7b 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -36,7 +36,6 @@
#include <linux/cpufreq.h>
#include <linux/slab.h>
#include <linux/io.h>
-#include <linux/of_i2c.h>
#include <linux/of_gpio.h>
#include <linux/pinctrl/consumer.h>
@@ -1033,7 +1032,7 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
int ret;
if (!pdev->dev.of_node) {
- pdata = pdev->dev.platform_data;
+ pdata = dev_get_platdata(&pdev->dev);
if (!pdata) {
dev_err(&pdev->dev, "no platform data\n");
return -EINVAL;
@@ -1154,7 +1153,6 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
return ret;
}
- of_i2c_register_devices(&i2c->adap);
platform_set_drvdata(pdev, i2c);
pm_runtime_enable(&pdev->dev);
diff --git a/drivers/i2c/busses/i2c-s6000.c b/drivers/i2c/busses/i2c-s6000.c
index 7c1ca5aca08..dd186a03768 100644
--- a/drivers/i2c/busses/i2c-s6000.c
+++ b/drivers/i2c/busses/i2c-s6000.c
@@ -290,8 +290,9 @@ static int s6i2c_probe(struct platform_device *dev)
clock = 0;
bus_num = -1;
- if (dev->dev.platform_data) {
- struct s6_i2c_platform_data *pdata = dev->dev.platform_data;
+ if (dev_get_platdata(&dev->dev)) {
+ struct s6_i2c_platform_data *pdata =
+ dev_get_platdata(&dev->dev);
bus_num = pdata->bus_num;
clock = pdata->clock;
}
diff --git a/drivers/i2c/busses/i2c-sh7760.c b/drivers/i2c/busses/i2c-sh7760.c
index 5351a2f3491..5e8f136e233 100644
--- a/drivers/i2c/busses/i2c-sh7760.c
+++ b/drivers/i2c/busses/i2c-sh7760.c
@@ -437,7 +437,7 @@ static int sh7760_i2c_probe(struct platform_device *pdev)
struct cami2c *id;
int ret;
- pd = pdev->dev.platform_data;
+ pd = dev_get_platdata(&pdev->dev);
if (!pd) {
dev_err(&pdev->dev, "no platform_data!\n");
ret = -ENODEV;
diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c
index debf745c026..55110ddbed1 100644
--- a/drivers/i2c/busses/i2c-sh_mobile.c
+++ b/drivers/i2c/busses/i2c-sh_mobile.c
@@ -27,7 +27,6 @@
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/i2c.h>
-#include <linux/of_i2c.h>
#include <linux/err.h>
#include <linux/pm_runtime.h>
#include <linux/clk.h>
@@ -658,7 +657,7 @@ static int sh_mobile_i2c_hook_irqs(struct platform_device *dev, int hook)
static int sh_mobile_i2c_probe(struct platform_device *dev)
{
- struct i2c_sh_mobile_platform_data *pdata = dev->dev.platform_data;
+ struct i2c_sh_mobile_platform_data *pdata = dev_get_platdata(&dev->dev);
struct sh_mobile_i2c_data *pd;
struct i2c_adapter *adap;
struct resource *res;
@@ -758,7 +757,6 @@ static int sh_mobile_i2c_probe(struct platform_device *dev)
"I2C adapter %d with bus speed %lu Hz (L/H=%x/%x)\n",
adap->nr, pd->bus_speed, pd->iccl, pd->icch);
- of_i2c_register_devices(adap);
return 0;
err_all:
diff --git a/drivers/i2c/busses/i2c-sirf.c b/drivers/i2c/busses/i2c-sirf.c
index a63c7d50683..6784f7f527a 100644
--- a/drivers/i2c/busses/i2c-sirf.c
+++ b/drivers/i2c/busses/i2c-sirf.c
@@ -12,7 +12,6 @@
#include <linux/slab.h>
#include <linux/platform_device.h>
#include <linux/i2c.h>
-#include <linux/of_i2c.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/io.h>
@@ -65,6 +64,8 @@
#define SIRFSOC_I2C_START BIT(7)
#define SIRFSOC_I2C_DEFAULT_SPEED 100000
+#define SIRFSOC_I2C_ERR_NOACK 1
+#define SIRFSOC_I2C_ERR_TIMEOUT 2
struct sirfsoc_i2c {
void __iomem *base;
@@ -143,14 +144,24 @@ static irqreturn_t i2c_sirfsoc_irq(int irq, void *dev_id)
if (i2c_stat & SIRFSOC_I2C_STAT_ERR) {
/* Error conditions */
- siic->err_status = 1;
+ siic->err_status = SIRFSOC_I2C_ERR_NOACK;
writel(SIRFSOC_I2C_STAT_ERR, siic->base + SIRFSOC_I2C_STATUS);
if (i2c_stat & SIRFSOC_I2C_STAT_NACK)
- dev_err(&siic->adapter.dev, "ACK not received\n");
+ dev_dbg(&siic->adapter.dev, "ACK not received\n");
else
dev_err(&siic->adapter.dev, "I2C error\n");
+ /*
+ * Due to hardware ANOMALY, we need to reset I2C earlier after
+ * we get NOACK while accessing non-existing clients, otherwise
+ * we will get errors even we access existing clients later
+ */
+ writel(readl(siic->base + SIRFSOC_I2C_CTRL) | SIRFSOC_I2C_RESET,
+ siic->base + SIRFSOC_I2C_CTRL);
+ while (readl(siic->base + SIRFSOC_I2C_CTRL) & SIRFSOC_I2C_RESET)
+ cpu_relax();
+
complete(&siic->done);
} else if (i2c_stat & SIRFSOC_I2C_STAT_CMD_DONE) {
/* CMD buffer execution complete */
@@ -183,6 +194,10 @@ static void i2c_sirfsoc_set_address(struct sirfsoc_i2c *siic,
if (msg->flags & I2C_M_RD)
addr |= 1;
+ /* Reverse direction bit */
+ if (msg->flags & I2C_M_REV_DIR_ADDR)
+ addr ^= 1;
+
writel(addr, siic->base + SIRFSOC_I2C_CMD(siic->cmd_ptr++));
}
@@ -191,7 +206,6 @@ static int i2c_sirfsoc_xfer_msg(struct sirfsoc_i2c *siic, struct i2c_msg *msg)
u32 regval = readl(siic->base + SIRFSOC_I2C_CTRL);
/* timeout waiting for the xfer to finish or fail */
int timeout = msecs_to_jiffies((msg->len + 1) * 50);
- int ret = 0;
i2c_sirfsoc_set_address(siic, msg);
@@ -200,7 +214,7 @@ static int i2c_sirfsoc_xfer_msg(struct sirfsoc_i2c *siic, struct i2c_msg *msg)
i2c_sirfsoc_queue_cmd(siic);
if (wait_for_completion_timeout(&siic->done, timeout) == 0) {
- siic->err_status = 1;
+ siic->err_status = SIRFSOC_I2C_ERR_TIMEOUT;
dev_err(&siic->adapter.dev, "Transfer timeout\n");
}
@@ -208,16 +222,14 @@ static int i2c_sirfsoc_xfer_msg(struct sirfsoc_i2c *siic, struct i2c_msg *msg)
siic->base + SIRFSOC_I2C_CTRL);
writel(0, siic->base + SIRFSOC_I2C_CMD_START);
- if (siic->err_status) {
+ /* i2c control doesn't response, reset it */
+ if (siic->err_status == SIRFSOC_I2C_ERR_TIMEOUT) {
writel(readl(siic->base + SIRFSOC_I2C_CTRL) | SIRFSOC_I2C_RESET,
siic->base + SIRFSOC_I2C_CTRL);
while (readl(siic->base + SIRFSOC_I2C_CTRL) & SIRFSOC_I2C_RESET)
cpu_relax();
-
- ret = -EIO;
}
-
- return ret;
+ return siic->err_status ? -EAGAIN : 0;
}
static u32 i2c_sirfsoc_func(struct i2c_adapter *adap)
@@ -321,6 +333,7 @@ static int i2c_sirfsoc_probe(struct platform_device *pdev)
adap->algo = &i2c_sirfsoc_algo;
adap->algo_data = siic;
+ adap->retries = 3;
adap->dev.of_node = pdev->dev.of_node;
adap->dev.parent = &pdev->dev;
@@ -348,7 +361,7 @@ static int i2c_sirfsoc_probe(struct platform_device *pdev)
if (bitrate < 100000)
regval =
- (2 * ctrl_speed) / (2 * bitrate * 11);
+ (2 * ctrl_speed) / (bitrate * 11);
else
regval = ctrl_speed / (bitrate * 5);
@@ -366,8 +379,6 @@ static int i2c_sirfsoc_probe(struct platform_device *pdev)
clk_disable(clk);
- of_i2c_register_devices(adap);
-
dev_info(&pdev->dev, " I2C adapter ready to operate\n");
return 0;
@@ -416,6 +427,8 @@ static int i2c_sirfsoc_resume(struct device *dev)
clk_enable(siic->clk);
writel(SIRFSOC_I2C_RESET, siic->base + SIRFSOC_I2C_CTRL);
+ while (readl(siic->base + SIRFSOC_I2C_CTRL) & SIRFSOC_I2C_RESET)
+ cpu_relax();
writel(SIRFSOC_I2C_CORE_EN | SIRFSOC_I2C_MASTER_MODE,
siic->base + SIRFSOC_I2C_CTRL);
writel(siic->clk_div, siic->base + SIRFSOC_I2C_CLK_CTRL);
diff --git a/drivers/i2c/busses/i2c-stu300.c b/drivers/i2c/busses/i2c-stu300.c
index d1a6b204af0..f8f6f2e552d 100644
--- a/drivers/i2c/busses/i2c-stu300.c
+++ b/drivers/i2c/busses/i2c-stu300.c
@@ -17,7 +17,6 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/slab.h>
-#include <linux/of_i2c.h>
/* the name of this kernel module */
#define NAME "stu300"
@@ -884,9 +883,6 @@ stu300_probe(struct platform_device *pdev)
dev->pdev = pdev;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res)
- return -ENOENT;
-
dev->virtbase = devm_ioremap_resource(&pdev->dev, res);
dev_dbg(&pdev->dev, "initialize bus device I2C%d on virtual "
"base %p\n", bus_nr, dev->virtbase);
@@ -936,12 +932,11 @@ stu300_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, dev);
dev_info(&pdev->dev, "ST DDC I2C @ %p, irq %d\n",
dev->virtbase, dev->irq);
- of_i2c_register_devices(adap);
return 0;
}
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
static int stu300_suspend(struct device *device)
{
struct stu300_dev *dev = dev_get_drvdata(device);
diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index 9aa1b60f7fd..c457cb447c6 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -25,7 +25,6 @@
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/slab.h>
-#include <linux/of_i2c.h>
#include <linux/of_device.h>
#include <linux/module.h>
#include <linux/clk/tegra.h>
@@ -802,8 +801,6 @@ static int tegra_i2c_probe(struct platform_device *pdev)
return ret;
}
- of_i2c_register_devices(&i2c_dev->adapter);
-
return 0;
}
diff --git a/drivers/i2c/busses/i2c-tiny-usb.c b/drivers/i2c/busses/i2c-tiny-usb.c
index 05106368d40..e7d3b755af3 100644
--- a/drivers/i2c/busses/i2c-tiny-usb.c
+++ b/drivers/i2c/busses/i2c-tiny-usb.c
@@ -54,12 +54,16 @@ static int usb_write(struct i2c_adapter *adapter, int cmd,
static int usb_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs, int num)
{
- unsigned char status;
+ unsigned char *pstatus;
struct i2c_msg *pmsg;
- int i;
+ int i, ret;
dev_dbg(&adapter->dev, "master xfer %d messages:\n", num);
+ pstatus = kmalloc(sizeof(*pstatus), GFP_KERNEL);
+ if (!pstatus)
+ return -ENOMEM;
+
for (i = 0 ; i < num ; i++) {
int cmd = CMD_I2C_IO;
@@ -84,7 +88,8 @@ static int usb_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs, int num)
pmsg->buf, pmsg->len) != pmsg->len) {
dev_err(&adapter->dev,
"failure reading data\n");
- return -EREMOTEIO;
+ ret = -EREMOTEIO;
+ goto out;
}
} else {
/* write data */
@@ -93,36 +98,50 @@ static int usb_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs, int num)
pmsg->buf, pmsg->len) != pmsg->len) {
dev_err(&adapter->dev,
"failure writing data\n");
- return -EREMOTEIO;
+ ret = -EREMOTEIO;
+ goto out;
}
}
/* read status */
- if (usb_read(adapter, CMD_GET_STATUS, 0, 0, &status, 1) != 1) {
+ if (usb_read(adapter, CMD_GET_STATUS, 0, 0, pstatus, 1) != 1) {
dev_err(&adapter->dev, "failure reading status\n");
- return -EREMOTEIO;
+ ret = -EREMOTEIO;
+ goto out;
}
- dev_dbg(&adapter->dev, " status = %d\n", status);
- if (status == STATUS_ADDRESS_NAK)
- return -EREMOTEIO;
+ dev_dbg(&adapter->dev, " status = %d\n", *pstatus);
+ if (*pstatus == STATUS_ADDRESS_NAK) {
+ ret = -EREMOTEIO;
+ goto out;
+ }
}
- return i;
+ ret = i;
+out:
+ kfree(pstatus);
+ return ret;
}
static u32 usb_func(struct i2c_adapter *adapter)
{
- __le32 func;
+ __le32 *pfunc;
+ u32 ret;
+
+ pfunc = kmalloc(sizeof(*pfunc), GFP_KERNEL);
/* get functionality from adapter */
- if (usb_read(adapter, CMD_GET_FUNC, 0, 0, &func, sizeof(func)) !=
- sizeof(func)) {
+ if (!pfunc || usb_read(adapter, CMD_GET_FUNC, 0, 0, pfunc,
+ sizeof(*pfunc)) != sizeof(*pfunc)) {
dev_err(&adapter->dev, "failure reading functionality\n");
- return 0;
+ ret = 0;
+ goto out;
}
- return le32_to_cpu(func);
+ ret = le32_to_cpup(pfunc);
+out:
+ kfree(pfunc);
+ return ret;
}
/* This is the actual algorithm we define */
diff --git a/drivers/i2c/busses/i2c-versatile.c b/drivers/i2c/busses/i2c-versatile.c
index f3a8790a07e..6bb3a89a440 100644
--- a/drivers/i2c/busses/i2c-versatile.c
+++ b/drivers/i2c/busses/i2c-versatile.c
@@ -16,7 +16,6 @@
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/io.h>
-#include <linux/of_i2c.h>
#define I2C_CONTROL 0x00
#define I2C_CONTROLS 0x00
@@ -108,7 +107,6 @@ static int i2c_versatile_probe(struct platform_device *dev)
ret = i2c_bit_add_numbered_bus(&i2c->adap);
if (ret >= 0) {
platform_set_drvdata(dev, i2c);
- of_i2c_register_devices(&i2c->adap);
return 0;
}
diff --git a/drivers/i2c/busses/i2c-wmt.c b/drivers/i2c/busses/i2c-wmt.c
index baaa7d15b73..c65da3d913a 100644
--- a/drivers/i2c/busses/i2c-wmt.c
+++ b/drivers/i2c/busses/i2c-wmt.c
@@ -21,7 +21,6 @@
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_address.h>
-#include <linux/of_i2c.h>
#include <linux/of_irq.h>
#include <linux/platform_device.h>
@@ -439,8 +438,6 @@ static int wmt_i2c_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, i2c_dev);
- of_i2c_register_devices(adap);
-
return 0;
}
diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c
index 3d0f0520c1b..4c8b368d463 100644
--- a/drivers/i2c/busses/i2c-xiic.c
+++ b/drivers/i2c/busses/i2c-xiic.c
@@ -40,7 +40,6 @@
#include <linux/i2c-xiic.h>
#include <linux/io.h>
#include <linux/slab.h>
-#include <linux/of_i2c.h>
#define DRIVER_NAME "xiic-i2c"
@@ -703,7 +702,7 @@ static int xiic_i2c_probe(struct platform_device *pdev)
if (irq < 0)
goto resource_missing;
- pdata = (struct xiic_i2c_platform_data *) pdev->dev.platform_data;
+ pdata = (struct xiic_i2c_platform_data *)dev_get_platdata(&pdev->dev);
i2c = kzalloc(sizeof(*i2c), GFP_KERNEL);
if (!i2c)
@@ -752,8 +751,6 @@ static int xiic_i2c_probe(struct platform_device *pdev)
i2c_new_device(&i2c->adap, pdata->devices + i);
}
- of_i2c_register_devices(&i2c->adap);
-
return 0;
add_adapter_failed:
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index f32ca293ae0..29d3f045a2b 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -23,7 +23,11 @@
SMBus 2.0 support by Mark Studebaker <mdsxyz123@yahoo.com> and
Jean Delvare <khali@linux-fr.org>
Mux support by Rodolfo Giometti <giometti@enneenne.com> and
- Michael Lawnick <michael.lawnick.ext@nsn.com> */
+ Michael Lawnick <michael.lawnick.ext@nsn.com>
+ OF support is copyright (c) 2008 Jochen Friedrich <jochen@scram.de>
+ (based on a previous patch from Jon Smirl <jonsmirl@gmail.com>) and
+ (c) 2013 Wolfram Sang <wsa@the-dreams.de>
+ */
#include <linux/module.h>
#include <linux/kernel.h>
@@ -35,7 +39,9 @@
#include <linux/init.h>
#include <linux/idr.h>
#include <linux/mutex.h>
+#include <linux/of.h>
#include <linux/of_device.h>
+#include <linux/of_irq.h>
#include <linux/completion.h>
#include <linux/hardirq.h>
#include <linux/irqflags.h>
@@ -954,6 +960,194 @@ static void i2c_scan_static_board_info(struct i2c_adapter *adapter)
up_read(&__i2c_board_lock);
}
+/* OF support code */
+
+#if IS_ENABLED(CONFIG_OF)
+static void of_i2c_register_devices(struct i2c_adapter *adap)
+{
+ void *result;
+ struct device_node *node;
+
+ /* Only register child devices if the adapter has a node pointer set */
+ if (!adap->dev.of_node)
+ return;
+
+ dev_dbg(&adap->dev, "of_i2c: walking child nodes\n");
+
+ for_each_available_child_of_node(adap->dev.of_node, node) {
+ struct i2c_board_info info = {};
+ struct dev_archdata dev_ad = {};
+ const __be32 *addr;
+ int len;
+
+ dev_dbg(&adap->dev, "of_i2c: register %s\n", node->full_name);
+
+ if (of_modalias_node(node, info.type, sizeof(info.type)) < 0) {
+ dev_err(&adap->dev, "of_i2c: modalias failure on %s\n",
+ node->full_name);
+ continue;
+ }
+
+ addr = of_get_property(node, "reg", &len);
+ if (!addr || (len < sizeof(int))) {
+ dev_err(&adap->dev, "of_i2c: invalid reg on %s\n",
+ node->full_name);
+ continue;
+ }
+
+ info.addr = be32_to_cpup(addr);
+ if (info.addr > (1 << 10) - 1) {
+ dev_err(&adap->dev, "of_i2c: invalid addr=%x on %s\n",
+ info.addr, node->full_name);
+ continue;
+ }
+
+ info.irq = irq_of_parse_and_map(node, 0);
+ info.of_node = of_node_get(node);
+ info.archdata = &dev_ad;
+
+ if (of_get_property(node, "wakeup-source", NULL))
+ info.flags |= I2C_CLIENT_WAKE;
+
+ request_module("%s%s", I2C_MODULE_PREFIX, info.type);
+
+ result = i2c_new_device(adap, &info);
+ if (result == NULL) {
+ dev_err(&adap->dev, "of_i2c: Failure registering %s\n",
+ node->full_name);
+ of_node_put(node);
+ irq_dispose_mapping(info.irq);
+ continue;
+ }
+ }
+}
+
+static int of_dev_node_match(struct device *dev, void *data)
+{
+ return dev->of_node == data;
+}
+
+/* must call put_device() when done with returned i2c_client device */
+struct i2c_client *of_find_i2c_device_by_node(struct device_node *node)
+{
+ struct device *dev;
+
+ dev = bus_find_device(&i2c_bus_type, NULL, node,
+ of_dev_node_match);
+ if (!dev)
+ return NULL;
+
+ return i2c_verify_client(dev);
+}
+EXPORT_SYMBOL(of_find_i2c_device_by_node);
+
+/* must call put_device() when done with returned i2c_adapter device */
+struct i2c_adapter *of_find_i2c_adapter_by_node(struct device_node *node)
+{
+ struct device *dev;
+
+ dev = bus_find_device(&i2c_bus_type, NULL, node,
+ of_dev_node_match);
+ if (!dev)
+ return NULL;
+
+ return i2c_verify_adapter(dev);
+}
+EXPORT_SYMBOL(of_find_i2c_adapter_by_node);
+#else
+static void of_i2c_register_devices(struct i2c_adapter *adap) { }
+#endif /* CONFIG_OF */
+
+/* ACPI support code */
+
+#if IS_ENABLED(CONFIG_ACPI)
+static int acpi_i2c_add_resource(struct acpi_resource *ares, void *data)
+{
+ struct i2c_board_info *info = data;
+
+ if (ares->type == ACPI_RESOURCE_TYPE_SERIAL_BUS) {
+ struct acpi_resource_i2c_serialbus *sb;
+
+ sb = &ares->data.i2c_serial_bus;
+ if (sb->type == ACPI_RESOURCE_SERIAL_TYPE_I2C) {
+ info->addr = sb->slave_address;
+ if (sb->access_mode == ACPI_I2C_10BIT_MODE)
+ info->flags |= I2C_CLIENT_TEN;
+ }
+ } else if (info->irq < 0) {
+ struct resource r;
+
+ if (acpi_dev_resource_interrupt(ares, 0, &r))
+ info->irq = r.start;
+ }
+
+ /* Tell the ACPI core to skip this resource */
+ return 1;
+}
+
+static acpi_status acpi_i2c_add_device(acpi_handle handle, u32 level,
+ void *data, void **return_value)
+{
+ struct i2c_adapter *adapter = data;
+ struct list_head resource_list;
+ struct i2c_board_info info;
+ struct acpi_device *adev;
+ int ret;
+
+ if (acpi_bus_get_device(handle, &adev))
+ return AE_OK;
+ if (acpi_bus_get_status(adev) || !adev->status.present)
+ return AE_OK;
+
+ memset(&info, 0, sizeof(info));
+ info.acpi_node.handle = handle;
+ info.irq = -1;
+
+ INIT_LIST_HEAD(&resource_list);
+ ret = acpi_dev_get_resources(adev, &resource_list,
+ acpi_i2c_add_resource, &info);
+ acpi_dev_free_resource_list(&resource_list);
+
+ if (ret < 0 || !info.addr)
+ return AE_OK;
+
+ strlcpy(info.type, dev_name(&adev->dev), sizeof(info.type));
+ if (!i2c_new_device(adapter, &info)) {
+ dev_err(&adapter->dev,
+ "failed to add I2C device %s from ACPI\n",
+ dev_name(&adev->dev));
+ }
+
+ return AE_OK;
+}
+
+/**
+ * acpi_i2c_register_devices - enumerate I2C slave devices behind adapter
+ * @adap: pointer to adapter
+ *
+ * Enumerate all I2C slave devices behind this adapter by walking the ACPI
+ * namespace. When a device is found it will be added to the Linux device
+ * model and bound to the corresponding ACPI handle.
+ */
+static void acpi_i2c_register_devices(struct i2c_adapter *adap)
+{
+ acpi_handle handle;
+ acpi_status status;
+
+ handle = ACPI_HANDLE(adap->dev.parent);
+ if (!handle)
+ return;
+
+ status = acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, 1,
+ acpi_i2c_add_device, NULL,
+ adap, NULL);
+ if (ACPI_FAILURE(status))
+ dev_warn(&adap->dev, "failed to enumerate I2C slaves\n");
+}
+#else
+static inline void acpi_i2c_register_devices(struct i2c_adapter *adap) {}
+#endif /* CONFIG_ACPI */
+
static int i2c_do_add_adapter(struct i2c_driver *driver,
struct i2c_adapter *adap)
{
@@ -1058,6 +1252,9 @@ static int i2c_register_adapter(struct i2c_adapter *adap)
exit_recovery:
/* create pre-declared device nodes */
+ of_i2c_register_devices(adap);
+ acpi_i2c_register_devices(adap);
+
if (adap->nr < __i2c_first_dynamic_bus_num)
i2c_scan_static_board_info(adap);
@@ -1282,7 +1479,6 @@ void i2c_del_adapter(struct i2c_adapter *adap)
}
EXPORT_SYMBOL(i2c_del_adapter);
-
/* ------------------------------------------------------------------------- */
int i2c_for_each_dev(void *data, int (*fn)(struct device *, void *))
@@ -1665,7 +1861,8 @@ static int i2c_default_probe(struct i2c_adapter *adap, unsigned short addr)
err = i2c_smbus_xfer(adap, addr, 0, I2C_SMBUS_READ, 0,
I2C_SMBUS_BYTE, &dummy);
else {
- dev_warn(&adap->dev, "No suitable probing method supported\n");
+ dev_warn(&adap->dev, "No suitable probing method supported for address 0x%02X\n",
+ addr);
err = -EOPNOTSUPP;
}
@@ -1825,7 +2022,8 @@ EXPORT_SYMBOL(i2c_get_adapter);
void i2c_put_adapter(struct i2c_adapter *adap)
{
- module_put(adap->owner);
+ if (adap)
+ module_put(adap->owner);
}
EXPORT_SYMBOL(i2c_put_adapter);
diff --git a/drivers/i2c/i2c-mux.c b/drivers/i2c/i2c-mux.c
index 7409ebb33c4..797e3117bef 100644
--- a/drivers/i2c/i2c-mux.c
+++ b/drivers/i2c/i2c-mux.c
@@ -25,7 +25,6 @@
#include <linux/i2c.h>
#include <linux/i2c-mux.h>
#include <linux/of.h>
-#include <linux/of_i2c.h>
/* multiplexer per channel data */
struct i2c_mux_priv {
@@ -185,8 +184,6 @@ struct i2c_adapter *i2c_add_mux_adapter(struct i2c_adapter *parent,
dev_info(&parent->dev, "Added multiplexed i2c bus %d\n",
i2c_adapter_id(&priv->adap));
- of_i2c_register_devices(&priv->adap);
-
return &priv->adap;
}
EXPORT_SYMBOL_GPL(i2c_add_mux_adapter);
diff --git a/drivers/i2c/i2c-smbus.c b/drivers/i2c/i2c-smbus.c
index 92cdd2323b0..44d4c6071c1 100644
--- a/drivers/i2c/i2c-smbus.c
+++ b/drivers/i2c/i2c-smbus.c
@@ -137,7 +137,7 @@ static irqreturn_t smbalert_irq(int irq, void *d)
static int smbalert_probe(struct i2c_client *ara,
const struct i2c_device_id *id)
{
- struct i2c_smbus_alert_setup *setup = ara->dev.platform_data;
+ struct i2c_smbus_alert_setup *setup = dev_get_platdata(&ara->dev);
struct i2c_smbus_alert *alert;
struct i2c_adapter *adapter = ara->adapter;
int res;
diff --git a/drivers/i2c/muxes/i2c-arb-gpio-challenge.c b/drivers/i2c/muxes/i2c-arb-gpio-challenge.c
index 210b6f7b902..74b41ae690f 100644
--- a/drivers/i2c/muxes/i2c-arb-gpio-challenge.c
+++ b/drivers/i2c/muxes/i2c-arb-gpio-challenge.c
@@ -21,7 +21,6 @@
#include <linux/i2c-mux.h>
#include <linux/init.h>
#include <linux/module.h>
-#include <linux/of_i2c.h>
#include <linux/of_gpio.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
@@ -131,7 +130,7 @@ static int i2c_arbitrator_probe(struct platform_device *pdev)
dev_err(dev, "Cannot find device tree node\n");
return -ENODEV;
}
- if (dev->platform_data) {
+ if (dev_get_platdata(dev)) {
dev_err(dev, "Platform data is not supported\n");
return -EINVAL;
}
diff --git a/drivers/i2c/muxes/i2c-mux-gpio.c b/drivers/i2c/muxes/i2c-mux-gpio.c
index 5a0ce0081dc..5d4a99ba743 100644
--- a/drivers/i2c/muxes/i2c-mux-gpio.c
+++ b/drivers/i2c/muxes/i2c-mux-gpio.c
@@ -16,7 +16,6 @@
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/gpio.h>
-#include <linux/of_i2c.h>
#include <linux/of_gpio.h>
struct gpiomux {
@@ -148,12 +147,14 @@ static int i2c_mux_gpio_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, mux);
- if (!pdev->dev.platform_data) {
+ if (!dev_get_platdata(&pdev->dev)) {
ret = i2c_mux_gpio_probe_dt(mux, pdev);
if (ret < 0)
return ret;
- } else
- memcpy(&mux->data, pdev->dev.platform_data, sizeof(mux->data));
+ } else {
+ memcpy(&mux->data, dev_get_platdata(&pdev->dev),
+ sizeof(mux->data));
+ }
/*
* If a GPIO chip name is provided, the GPIO pin numbers provided are
diff --git a/drivers/i2c/muxes/i2c-mux-pca9541.c b/drivers/i2c/muxes/i2c-mux-pca9541.c
index 966a18a5d12..c4f08ad3118 100644
--- a/drivers/i2c/muxes/i2c-mux-pca9541.c
+++ b/drivers/i2c/muxes/i2c-mux-pca9541.c
@@ -324,7 +324,7 @@ static int pca9541_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct i2c_adapter *adap = client->adapter;
- struct pca954x_platform_data *pdata = client->dev.platform_data;
+ struct pca954x_platform_data *pdata = dev_get_platdata(&client->dev);
struct pca9541 *data;
int force;
int ret = -ENODEV;
diff --git a/drivers/i2c/muxes/i2c-mux-pca954x.c b/drivers/i2c/muxes/i2c-mux-pca954x.c
index a531d801dbe..bad5b84a598 100644
--- a/drivers/i2c/muxes/i2c-mux-pca954x.c
+++ b/drivers/i2c/muxes/i2c-mux-pca954x.c
@@ -185,7 +185,7 @@ static int pca954x_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct i2c_adapter *adap = to_i2c_adapter(client->dev.parent);
- struct pca954x_platform_data *pdata = client->dev.platform_data;
+ struct pca954x_platform_data *pdata = dev_get_platdata(&client->dev);
int num, force, class;
struct pca954x *data;
int ret = -ENODEV;
diff --git a/drivers/i2c/muxes/i2c-mux-pinctrl.c b/drivers/i2c/muxes/i2c-mux-pinctrl.c
index a43c0ce5e3d..69a91732ae6 100644
--- a/drivers/i2c/muxes/i2c-mux-pinctrl.c
+++ b/drivers/i2c/muxes/i2c-mux-pinctrl.c
@@ -20,7 +20,6 @@
#include <linux/i2c-mux.h>
#include <linux/init.h>
#include <linux/module.h>
-#include <linux/of_i2c.h>
#include <linux/pinctrl/consumer.h>
#include <linux/i2c-mux-pinctrl.h>
#include <linux/platform_device.h>
@@ -145,7 +144,7 @@ static int i2c_mux_pinctrl_probe(struct platform_device *pdev)
mux->dev = &pdev->dev;
- mux->pdata = pdev->dev.platform_data;
+ mux->pdata = dev_get_platdata(&pdev->dev);
if (!mux->pdata) {
ret = i2c_mux_pinctrl_parse_dt(mux, pdev);
if (ret < 0)