summaryrefslogtreecommitdiffstats
path: root/drivers/i2c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/i2c')
-rw-r--r--drivers/i2c/algos/i2c-algo-bit.c4
-rw-r--r--drivers/i2c/algos/i2c-algo-pca.c250
-rw-r--r--drivers/i2c/algos/i2c-algo-pcf.c261
-rw-r--r--drivers/i2c/busses/Kconfig9
-rw-r--r--drivers/i2c/busses/i2c-acorn.c2
-rw-r--r--drivers/i2c/busses/i2c-davinci.c8
-rw-r--r--drivers/i2c/busses/i2c-i801.c77
-rw-r--r--drivers/i2c/busses/i2c-ibm_iic.c6
-rw-r--r--drivers/i2c/busses/i2c-iop3xx.c2
-rw-r--r--drivers/i2c/busses/i2c-mpc.c13
-rw-r--r--drivers/i2c/busses/i2c-mv64xxx.c7
-rw-r--r--drivers/i2c/busses/i2c-nforce2.c12
-rw-r--r--drivers/i2c/busses/i2c-omap.c47
-rw-r--r--drivers/i2c/busses/i2c-pca-isa.c39
-rw-r--r--drivers/i2c/busses/i2c-pca-platform.c48
-rw-r--r--drivers/i2c/busses/i2c-piix4.c77
-rw-r--r--drivers/i2c/busses/i2c-powermac.c3
-rw-r--r--drivers/i2c/busses/i2c-pxa.c9
-rw-r--r--drivers/i2c/busses/i2c-versatile.c10
-rw-r--r--drivers/i2c/chips/Kconfig13
-rw-r--r--drivers/i2c/chips/Makefile1
-rw-r--r--drivers/i2c/chips/pcf8591.c325
-rw-r--r--drivers/i2c/i2c-core.c38
23 files changed, 626 insertions, 635 deletions
diff --git a/drivers/i2c/algos/i2c-algo-bit.c b/drivers/i2c/algos/i2c-algo-bit.c
index eb8f72ca02f..d420cc5f563 100644
--- a/drivers/i2c/algos/i2c-algo-bit.c
+++ b/drivers/i2c/algos/i2c-algo-bit.c
@@ -604,9 +604,7 @@ static int i2c_bit_prepare_bus(struct i2c_adapter *adap)
/* register new adapter to i2c module... */
adap->algo = &i2c_bit_algo;
-
- adap->timeout = 100; /* default values, should */
- adap->retries = 3; /* be replaced by defines */
+ adap->retries = 3;
return 0;
}
diff --git a/drivers/i2c/algos/i2c-algo-pca.c b/drivers/i2c/algos/i2c-algo-pca.c
index d50b329a3c9..f68e5f8e23e 100644
--- a/drivers/i2c/algos/i2c-algo-pca.c
+++ b/drivers/i2c/algos/i2c-algo-pca.c
@@ -22,14 +22,18 @@
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/delay.h>
+#include <linux/jiffies.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/i2c.h>
#include <linux/i2c-algo-pca.h>
-#define DEB1(fmt, args...) do { if (i2c_debug>=1) printk(fmt, ## args); } while(0)
-#define DEB2(fmt, args...) do { if (i2c_debug>=2) printk(fmt, ## args); } while(0)
-#define DEB3(fmt, args...) do { if (i2c_debug>=3) printk(fmt, ## args); } while(0)
+#define DEB1(fmt, args...) do { if (i2c_debug >= 1) \
+ printk(KERN_DEBUG fmt, ## args); } while (0)
+#define DEB2(fmt, args...) do { if (i2c_debug >= 2) \
+ printk(KERN_DEBUG fmt, ## args); } while (0)
+#define DEB3(fmt, args...) do { if (i2c_debug >= 3) \
+ printk(KERN_DEBUG fmt, ## args); } while (0)
static int i2c_debug;
@@ -43,19 +47,27 @@ static int i2c_debug;
#define pca_wait(adap) adap->wait_for_completion(adap->data)
#define pca_reset(adap) adap->reset_chip(adap->data)
+static void pca9665_reset(void *pd)
+{
+ struct i2c_algo_pca_data *adap = pd;
+ pca_outw(adap, I2C_PCA_INDPTR, I2C_PCA_IPRESET);
+ pca_outw(adap, I2C_PCA_IND, 0xA5);
+ pca_outw(adap, I2C_PCA_IND, 0x5A);
+}
+
/*
* Generate a start condition on the i2c bus.
*
* returns after the start condition has occurred
*/
-static void pca_start(struct i2c_algo_pca_data *adap)
+static int pca_start(struct i2c_algo_pca_data *adap)
{
int sta = pca_get_con(adap);
DEB2("=== START\n");
sta |= I2C_PCA_CON_STA;
sta &= ~(I2C_PCA_CON_STO|I2C_PCA_CON_SI);
pca_set_con(adap, sta);
- pca_wait(adap);
+ return pca_wait(adap);
}
/*
@@ -63,14 +75,14 @@ static void pca_start(struct i2c_algo_pca_data *adap)
*
* return after the repeated start condition has occurred
*/
-static void pca_repeated_start(struct i2c_algo_pca_data *adap)
+static int pca_repeated_start(struct i2c_algo_pca_data *adap)
{
int sta = pca_get_con(adap);
DEB2("=== REPEATED START\n");
sta |= I2C_PCA_CON_STA;
sta &= ~(I2C_PCA_CON_STO|I2C_PCA_CON_SI);
pca_set_con(adap, sta);
- pca_wait(adap);
+ return pca_wait(adap);
}
/*
@@ -96,7 +108,7 @@ static void pca_stop(struct i2c_algo_pca_data *adap)
*
* returns after the address has been sent
*/
-static void pca_address(struct i2c_algo_pca_data *adap,
+static int pca_address(struct i2c_algo_pca_data *adap,
struct i2c_msg *msg)
{
int sta = pca_get_con(adap);
@@ -113,7 +125,7 @@ static void pca_address(struct i2c_algo_pca_data *adap,
sta &= ~(I2C_PCA_CON_STO|I2C_PCA_CON_STA|I2C_PCA_CON_SI);
pca_set_con(adap, sta);
- pca_wait(adap);
+ return pca_wait(adap);
}
/*
@@ -121,7 +133,7 @@ static void pca_address(struct i2c_algo_pca_data *adap,
*
* Returns after the byte has been transmitted
*/
-static void pca_tx_byte(struct i2c_algo_pca_data *adap,
+static int pca_tx_byte(struct i2c_algo_pca_data *adap,
__u8 b)
{
int sta = pca_get_con(adap);
@@ -131,7 +143,7 @@ static void pca_tx_byte(struct i2c_algo_pca_data *adap,
sta &= ~(I2C_PCA_CON_STO|I2C_PCA_CON_STA|I2C_PCA_CON_SI);
pca_set_con(adap, sta);
- pca_wait(adap);
+ return pca_wait(adap);
}
/*
@@ -151,7 +163,7 @@ static void pca_rx_byte(struct i2c_algo_pca_data *adap,
*
* Returns after next byte has arrived.
*/
-static void pca_rx_ack(struct i2c_algo_pca_data *adap,
+static int pca_rx_ack(struct i2c_algo_pca_data *adap,
int ack)
{
int sta = pca_get_con(adap);
@@ -162,7 +174,7 @@ static void pca_rx_ack(struct i2c_algo_pca_data *adap,
sta |= I2C_PCA_CON_AA;
pca_set_con(adap, sta);
- pca_wait(adap);
+ return pca_wait(adap);
}
static int pca_xfer(struct i2c_adapter *i2c_adap,
@@ -175,14 +187,17 @@ static int pca_xfer(struct i2c_adapter *i2c_adap,
int numbytes = 0;
int state;
int ret;
- int timeout = i2c_adap->timeout;
-
- while ((state = pca_status(adap)) != 0xf8 && timeout--) {
- msleep(10);
- }
- if (state != 0xf8) {
- dev_dbg(&i2c_adap->dev, "bus is not idle. status is %#04x\n", state);
- return -EAGAIN;
+ int completed = 1;
+ unsigned long timeout = jiffies + i2c_adap->timeout;
+
+ while (pca_status(adap) != 0xf8) {
+ if (time_before(jiffies, timeout)) {
+ msleep(10);
+ } else {
+ dev_dbg(&i2c_adap->dev, "bus is not idle. status is "
+ "%#04x\n", state);
+ return -EAGAIN;
+ }
}
DEB1("{{{ XFER %d messages\n", num);
@@ -218,18 +233,19 @@ static int pca_xfer(struct i2c_adapter *i2c_adap,
switch (state) {
case 0xf8: /* On reset or stop the bus is idle */
- pca_start(adap);
+ completed = pca_start(adap);
break;
case 0x08: /* A START condition has been transmitted */
case 0x10: /* A repeated start condition has been transmitted */
- pca_address(adap, msg);
+ completed = pca_address(adap, msg);
break;
case 0x18: /* SLA+W has been transmitted; ACK has been received */
case 0x28: /* Data byte in I2CDAT has been transmitted; ACK has been received */
if (numbytes < msg->len) {
- pca_tx_byte(adap, msg->buf[numbytes]);
+ completed = pca_tx_byte(adap,
+ msg->buf[numbytes]);
numbytes++;
break;
}
@@ -237,7 +253,7 @@ static int pca_xfer(struct i2c_adapter *i2c_adap,
if (curmsg == num)
pca_stop(adap);
else
- pca_repeated_start(adap);
+ completed = pca_repeated_start(adap);
break;
case 0x20: /* SLA+W has been transmitted; NOT ACK has been received */
@@ -246,21 +262,22 @@ static int pca_xfer(struct i2c_adapter *i2c_adap,
goto out;
case 0x40: /* SLA+R has been transmitted; ACK has been received */
- pca_rx_ack(adap, msg->len > 1);
+ completed = pca_rx_ack(adap, msg->len > 1);
break;
case 0x50: /* Data bytes has been received; ACK has been returned */
if (numbytes < msg->len) {
pca_rx_byte(adap, &msg->buf[numbytes], 1);
numbytes++;
- pca_rx_ack(adap, numbytes < msg->len - 1);
+ completed = pca_rx_ack(adap,
+ numbytes < msg->len - 1);
break;
}
curmsg++; numbytes = 0;
if (curmsg == num)
pca_stop(adap);
else
- pca_repeated_start(adap);
+ completed = pca_repeated_start(adap);
break;
case 0x48: /* SLA+R has been transmitted; NOT ACK has been received */
@@ -283,7 +300,7 @@ static int pca_xfer(struct i2c_adapter *i2c_adap,
if (curmsg == num)
pca_stop(adap);
else
- pca_repeated_start(adap);
+ completed = pca_repeated_start(adap);
} else {
DEB2("NOT ACK sent after data byte received. "
"Not final byte. numbytes %d. len %d\n",
@@ -309,11 +326,13 @@ static int pca_xfer(struct i2c_adapter *i2c_adap,
break;
}
+ if (!completed)
+ goto out;
}
ret = curmsg;
out:
- DEB1(KERN_CRIT "}}} transfered %d/%d messages. "
+ DEB1("}}} transfered %d/%d messages. "
"status is %#04x. control is %#04x\n",
curmsg, num, pca_status(adap),
pca_get_con(adap));
@@ -330,26 +349,171 @@ static const struct i2c_algorithm pca_algo = {
.functionality = pca_func,
};
-static int pca_init(struct i2c_adapter *adap)
+static unsigned int pca_probe_chip(struct i2c_adapter *adap)
{
- static int freqs[] = {330,288,217,146,88,59,44,36};
- int clock;
struct i2c_algo_pca_data *pca_data = adap->algo_data;
-
- if (pca_data->i2c_clock > 7) {
- printk(KERN_WARNING "%s: Invalid I2C clock speed selected. Trying default.\n",
- adap->name);
- pca_data->i2c_clock = I2C_PCA_CON_59kHz;
+ /* The trick here is to check if there is an indirect register
+ * available. If there is one, we will read the value we first
+ * wrote on I2C_PCA_IADR. Otherwise, we will read the last value
+ * we wrote on I2C_PCA_ADR
+ */
+ pca_outw(pca_data, I2C_PCA_INDPTR, I2C_PCA_IADR);
+ pca_outw(pca_data, I2C_PCA_IND, 0xAA);
+ pca_outw(pca_data, I2C_PCA_INDPTR, I2C_PCA_ITO);
+ pca_outw(pca_data, I2C_PCA_IND, 0x00);
+ pca_outw(pca_data, I2C_PCA_INDPTR, I2C_PCA_IADR);
+ if (pca_inw(pca_data, I2C_PCA_IND) == 0xAA) {
+ printk(KERN_INFO "%s: PCA9665 detected.\n", adap->name);
+ return I2C_PCA_CHIP_9665;
+ } else {
+ printk(KERN_INFO "%s: PCA9564 detected.\n", adap->name);
+ return I2C_PCA_CHIP_9564;
}
+}
+
+static int pca_init(struct i2c_adapter *adap)
+{
+ struct i2c_algo_pca_data *pca_data = adap->algo_data;
adap->algo = &pca_algo;
- pca_reset(pca_data);
+ if (pca_probe_chip(adap) == I2C_PCA_CHIP_9564) {
+ static int freqs[] = {330, 288, 217, 146, 88, 59, 44, 36};
+ int clock;
+
+ if (pca_data->i2c_clock > 7) {
+ switch (pca_data->i2c_clock) {
+ case 330000:
+ pca_data->i2c_clock = I2C_PCA_CON_330kHz;
+ break;
+ case 288000:
+ pca_data->i2c_clock = I2C_PCA_CON_288kHz;
+ break;
+ case 217000:
+ pca_data->i2c_clock = I2C_PCA_CON_217kHz;
+ break;
+ case 146000:
+ pca_data->i2c_clock = I2C_PCA_CON_146kHz;
+ break;
+ case 88000:
+ pca_data->i2c_clock = I2C_PCA_CON_88kHz;
+ break;
+ case 59000:
+ pca_data->i2c_clock = I2C_PCA_CON_59kHz;
+ break;
+ case 44000:
+ pca_data->i2c_clock = I2C_PCA_CON_44kHz;
+ break;
+ case 36000:
+ pca_data->i2c_clock = I2C_PCA_CON_36kHz;
+ break;
+ default:
+ printk(KERN_WARNING
+ "%s: Invalid I2C clock speed selected."
+ " Using default 59kHz.\n", adap->name);
+ pca_data->i2c_clock = I2C_PCA_CON_59kHz;
+ }
+ } else {
+ printk(KERN_WARNING "%s: "
+ "Choosing the clock frequency based on "
+ "index is deprecated."
+ " Use the nominal frequency.\n", adap->name);
+ }
+
+ pca_reset(pca_data);
+
+ clock = pca_clock(pca_data);
+ printk(KERN_INFO "%s: Clock frequency is %dkHz\n",
+ adap->name, freqs[clock]);
+
+ pca_set_con(pca_data, I2C_PCA_CON_ENSIO | clock);
+ } else {
+ int clock;
+ int mode;
+ int tlow, thi;
+ /* Values can be found on PCA9665 datasheet section 7.3.2.6 */
+ int min_tlow, min_thi;
+ /* These values are the maximum raise and fall values allowed
+ * by the I2C operation mode (Standard, Fast or Fast+)
+ * They are used (added) below to calculate the clock dividers
+ * of PCA9665. Note that they are slightly different of the
+ * real maximum, to allow the change on mode exactly on the
+ * maximum clock rate for each mode
+ */
+ int raise_fall_time;
+
+ struct i2c_algo_pca_data *pca_data = adap->algo_data;
+
+ /* Ignore the reset function from the module,
+ * we can use the parallel bus reset
+ */
+ pca_data->reset_chip = pca9665_reset;
+
+ if (pca_data->i2c_clock > 1265800) {
+ printk(KERN_WARNING "%s: I2C clock speed too high."
+ " Using 1265.8kHz.\n", adap->name);
+ pca_data->i2c_clock = 1265800;
+ }
+
+ if (pca_data->i2c_clock < 60300) {
+ printk(KERN_WARNING "%s: I2C clock speed too low."
+ " Using 60.3kHz.\n", adap->name);
+ pca_data->i2c_clock = 60300;
+ }
- clock = pca_clock(pca_data);
- DEB1(KERN_INFO "%s: Clock frequency is %dkHz\n", adap->name, freqs[clock]);
+ /* To avoid integer overflow, use clock/100 for calculations */
+ clock = pca_clock(pca_data) / 100;
+
+ if (pca_data->i2c_clock > 10000) {
+ mode = I2C_PCA_MODE_TURBO;
+ min_tlow = 14;
+ min_thi = 5;
+ raise_fall_time = 22; /* Raise 11e-8s, Fall 11e-8s */
+ } else if (pca_data->i2c_clock > 4000) {
+ mode = I2C_PCA_MODE_FASTP;
+ min_tlow = 17;
+ min_thi = 9;
+ raise_fall_time = 22; /* Raise 11e-8s, Fall 11e-8s */
+ } else if (pca_data->i2c_clock > 1000) {
+ mode = I2C_PCA_MODE_FAST;
+ min_tlow = 44;
+ min_thi = 20;
+ raise_fall_time = 58; /* Raise 29e-8s, Fall 29e-8s */
+ } else {
+ mode = I2C_PCA_MODE_STD;
+ min_tlow = 157;
+ min_thi = 134;
+ raise_fall_time = 127; /* Raise 29e-8s, Fall 98e-8s */
+ }
+
+ /* The minimum clock that respects the thi/tlow = 134/157 is
+ * 64800 Hz. Below that, we have to fix the tlow to 255 and
+ * calculate the thi factor.
+ */
+ if (clock < 648) {
+ tlow = 255;
+ thi = 1000000 - clock * raise_fall_time;
+ thi /= (I2C_PCA_OSC_PER * clock) - tlow;
+ } else {
+ tlow = (1000000 - clock * raise_fall_time) * min_tlow;
+ tlow /= I2C_PCA_OSC_PER * clock * (min_thi + min_tlow);
+ thi = tlow * min_thi / min_tlow;
+ }
- pca_set_con(pca_data, I2C_PCA_CON_ENSIO | clock);
+ pca_reset(pca_data);
+
+ printk(KERN_INFO
+ "%s: Clock frequency is %dHz\n", adap->name, clock * 100);
+
+ pca_outw(pca_data, I2C_PCA_INDPTR, I2C_PCA_IMODE);
+ pca_outw(pca_data, I2C_PCA_IND, mode);
+ pca_outw(pca_data, I2C_PCA_INDPTR, I2C_PCA_ISCLL);
+ pca_outw(pca_data, I2C_PCA_IND, tlow);
+ pca_outw(pca_data, I2C_PCA_INDPTR, I2C_PCA_ISCLH);
+ pca_outw(pca_data, I2C_PCA_IND, thi);
+
+ pca_set_con(pca_data, I2C_PCA_CON_ENSIO);
+ }
udelay(500); /* 500 us for oscilator to stabilise */
return 0;
@@ -384,7 +548,7 @@ EXPORT_SYMBOL(i2c_pca_add_numbered_bus);
MODULE_AUTHOR("Ian Campbell <icampbell@arcom.com>, "
"Wolfram Sang <w.sang@pengutronix.de>");
-MODULE_DESCRIPTION("I2C-Bus PCA9564 algorithm");
+MODULE_DESCRIPTION("I2C-Bus PCA9564/PCA9665 algorithm");
MODULE_LICENSE("GPL");
module_param(i2c_debug, int, 0);
diff --git a/drivers/i2c/algos/i2c-algo-pcf.c b/drivers/i2c/algos/i2c-algo-pcf.c
index 3e01992230b..7ce75775ec7 100644
--- a/drivers/i2c/algos/i2c-algo-pcf.c
+++ b/drivers/i2c/algos/i2c-algo-pcf.c
@@ -1,31 +1,30 @@
-/* ------------------------------------------------------------------------- */
-/* i2c-algo-pcf.c i2c driver algorithms for PCF8584 adapters */
-/* ------------------------------------------------------------------------- */
-/* Copyright (C) 1995-1997 Simon G. Vogl
- 1998-2000 Hans Berglund
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
-/* ------------------------------------------------------------------------- */
-
-/* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and
- Frodo Looijaard <frodol@dds.nl> ,and also from Martin Bailey
- <mbailey@littlefeet-inc.com> */
-
-/* Partially rewriten by Oleg I. Vdovikin <vdovikin@jscc.ru> to handle multiple
- messages, proper stop/repstart signaling during receive,
- added detect code */
+/*
+ * i2c-algo-pcf.c i2c driver algorithms for PCF8584 adapters
+ *
+ * Copyright (C) 1995-1997 Simon G. Vogl
+ * 1998-2000 Hans Berglund
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and
+ * Frodo Looijaard <frodol@dds.nl>, and also from Martin Bailey
+ * <mbailey@littlefeet-inc.com>
+ *
+ * Partially rewriten by Oleg I. Vdovikin <vdovikin@jscc.ru> to handle multiple
+ * messages, proper stop/repstart signaling during receive, added detect code
+ */
#include <linux/kernel.h>
#include <linux/module.h>
@@ -38,17 +37,18 @@
#include "i2c-algo-pcf.h"
-#define DEB2(x) if (i2c_debug>=2) x
-#define DEB3(x) if (i2c_debug>=3) x /* print several statistical values*/
-#define DEBPROTO(x) if (i2c_debug>=9) x;
- /* debug the protocol by showing transferred bits */
+#define DEB2(x) if (i2c_debug >= 2) x
+#define DEB3(x) if (i2c_debug >= 3) x /* print several statistical values */
+#define DEBPROTO(x) if (i2c_debug >= 9) x;
+ /* debug the protocol by showing transferred bits */
#define DEF_TIMEOUT 16
-/* module parameters:
+/*
+ * module parameters:
*/
static int i2c_debug;
-/* --- setting states on the bus with the right timing: --------------- */
+/* setting states on the bus with the right timing: */
#define set_pcf(adap, ctl, val) adap->setpcf(adap->data, ctl, val)
#define get_pcf(adap, ctl) adap->getpcf(adap->data, ctl)
@@ -57,22 +57,21 @@ static int i2c_debug;
#define i2c_outb(adap, val) adap->setpcf(adap->data, 0, val)
#define i2c_inb(adap) adap->getpcf(adap->data, 0)
-/* --- other auxiliary functions -------------------------------------- */
+/* other auxiliary functions */
-static void i2c_start(struct i2c_algo_pcf_data *adap)
+static void i2c_start(struct i2c_algo_pcf_data *adap)
{
- DEBPROTO(printk("S "));
+ DEBPROTO(printk(KERN_DEBUG "S "));
set_pcf(adap, 1, I2C_PCF_START);
}
-static void i2c_repstart(struct i2c_algo_pcf_data *adap)
+static void i2c_repstart(struct i2c_algo_pcf_data *adap)
{
DEBPROTO(printk(" Sr "));
set_pcf(adap, 1, I2C_PCF_REPSTART);
}
-
-static void i2c_stop(struct i2c_algo_pcf_data *adap)
+static void i2c_stop(struct i2c_algo_pcf_data *adap)
{
DEBPROTO(printk("P\n"));
set_pcf(adap, 1, I2C_PCF_STOP);
@@ -82,17 +81,17 @@ static void handle_lab(struct i2c_algo_pcf_data *adap, const int *status)
{
DEB2(printk(KERN_INFO
"i2c-algo-pcf.o: lost arbitration (CSR 0x%02x)\n",
- *status));
-
- /* Cleanup from LAB -- reset and enable ESO.
+ *status));
+ /*
+ * Cleanup from LAB -- reset and enable ESO.
* This resets the PCF8584; since we've lost the bus, no
* further attempts should be made by callers to clean up
* (no i2c_stop() etc.)
*/
set_pcf(adap, 1, I2C_PCF_PIN);
set_pcf(adap, 1, I2C_PCF_ESO);
-
- /* We pause for a time period sufficient for any running
+ /*
+ * We pause for a time period sufficient for any running
* I2C transaction to complete -- the arbitration logic won't
* work properly until the next START is seen.
* It is assumed the bus driver or client has set a proper value.
@@ -108,48 +107,50 @@ static void handle_lab(struct i2c_algo_pcf_data *adap, const int *status)
get_pcf(adap, 1)));
}
-static int wait_for_bb(struct i2c_algo_pcf_data *adap) {
+static int wait_for_bb(struct i2c_algo_pcf_data *adap)
+{
int timeout = DEF_TIMEOUT;
int status;
status = get_pcf(adap, 1);
-#ifndef STUB_I2C
- while (timeout-- && !(status & I2C_PCF_BB)) {
+
+ while (!(status & I2C_PCF_BB) && --timeout) {
udelay(100); /* wait for 100 us */
status = get_pcf(adap, 1);
}
-#endif
- if (timeout <= 0) {
+
+ if (timeout == 0) {
printk(KERN_ERR "Timeout waiting for Bus Busy\n");
+ return -ETIMEDOUT;
}
-
- return (timeout<=0);
-}
+ return 0;
+}
-static int wait_for_pin(struct i2c_algo_pcf_data *adap, int *status) {
+static int wait_for_pin(struct i2c_algo_pcf_data *adap, int *status)
+{
int timeout = DEF_TIMEOUT;
*status = get_pcf(adap, 1);
-#ifndef STUB_I2C
- while (timeout-- && (*status & I2C_PCF_PIN)) {
+
+ while ((*status & I2C_PCF_PIN) && --timeout) {
adap->waitforpin(adap->data);
*status = get_pcf(adap, 1);
}
if (*status & I2C_PCF_LAB) {
handle_lab(adap, status);
- return(-EINTR);
+ return -EINTR;
}
-#endif
- if (timeout <= 0)
- return(-1);
- else
- return(0);
+
+ if (timeout == 0)
+ return -ETIMEDOUT;
+
+ return 0;
}
-/*
+/*
* This should perform the 'PCF8584 initialization sequence' as described
* in the Philips IC12 data book (1995, Aug 29).
* There should be a 30 clock cycle wait after reset, I assume this
@@ -164,18 +165,21 @@ static int pcf_init_8584 (struct i2c_algo_pcf_data *adap)
{
unsigned char temp;
- DEB3(printk(KERN_DEBUG "i2c-algo-pcf.o: PCF state 0x%02x\n", get_pcf(adap, 1)));
+ DEB3(printk(KERN_DEBUG "i2c-algo-pcf.o: PCF state 0x%02x\n",
+ get_pcf(adap, 1)));
/* S1=0x80: S0 selected, serial interface off */
set_pcf(adap, 1, I2C_PCF_PIN);
- /* check to see S1 now used as R/W ctrl -
- PCF8584 does that when ESO is zero */
+ /*
+ * check to see S1 now used as R/W ctrl -
+ * PCF8584 does that when ESO is zero
+ */
if (((temp = get_pcf(adap, 1)) & 0x7f) != (0)) {
DEB2(printk(KERN_ERR "i2c-algo-pcf.o: PCF detection failed -- can't select S0 (0x%02x).\n", temp));
return -ENXIO; /* definetly not PCF8584 */
}
- /* load own address in S0, effective address is (own << 1) */
+ /* load own address in S0, effective address is (own << 1) */
i2c_outb(adap, get_own(adap));
/* check it's really written */
if ((temp = i2c_inb(adap)) != get_own(adap)) {
@@ -183,7 +187,7 @@ static int pcf_init_8584 (struct i2c_algo_pcf_data *adap)
return -ENXIO;
}
- /* S1=0xA0, next byte in S2 */
+ /* S1=0xA0, next byte in S2 */
set_pcf(adap, 1, I2C_PCF_PIN | I2C_PCF_ES1);
/* check to see S2 now selected */
if (((temp = get_pcf(adap, 1)) & 0x7f) != I2C_PCF_ES1) {
@@ -191,7 +195,7 @@ static int pcf_init_8584 (struct i2c_algo_pcf_data *adap)
return -ENXIO;
}
- /* load clock register S2 */
+ /* load clock register S2 */
i2c_outb(adap, get_clock(adap));
/* check it's really written, the only 5 lowest bits does matter */
if (((temp = i2c_inb(adap)) & 0x1f) != get_clock(adap)) {
@@ -199,7 +203,7 @@ static int pcf_init_8584 (struct i2c_algo_pcf_data *adap)
return -ENXIO;
}
- /* Enable serial interface, idle, S0 selected */
+ /* Enable serial interface, idle, S0 selected */
set_pcf(adap, 1, I2C_PCF_IDLE);
/* check to see PCF is really idled and we can access status register */
@@ -207,57 +211,47 @@ static int pcf_init_8584 (struct i2c_algo_pcf_data *adap)
DEB2(printk(KERN_ERR "i2c-algo-pcf.o: PCF detection failed -- can't select S1` (0x%02x).\n", temp));
return -ENXIO;
}
-
+
printk(KERN_DEBUG "i2c-algo-pcf.o: detected and initialized PCF8584.\n");
return 0;
}
-
-/* ----- Utility functions
- */
-
static int pcf_sendbytes(struct i2c_adapter *i2c_adap, const char *buf,
- int count, int last)
+ int count, int last)
{
struct i2c_algo_pcf_data *adap = i2c_adap->algo_data;
int wrcount, status, timeout;
-
+
for (wrcount=0; wrcount<count; ++wrcount) {
DEB2(dev_dbg(&i2c_adap->dev, "i2c_write: writing %2.2X\n",
- buf[wrcount]&0xff));
+ buf[wrcount] & 0xff));
i2c_outb(adap, buf[wrcount]);
timeout = wait_for_pin(adap, &status);
if (timeout) {
- if (timeout == -EINTR) {
- /* arbitration lost */
- return -EINTR;
- }
+ if (timeout == -EINTR)
+ return -EINTR; /* arbitration lost */
+
i2c_stop(adap);
dev_err(&i2c_adap->dev, "i2c_write: error - timeout.\n");
return -EREMOTEIO; /* got a better one ?? */
}
-#ifndef STUB_I2C
if (status & I2C_PCF_LRB) {
i2c_stop(adap);
dev_err(&i2c_adap->dev, "i2c_write: error - no ack.\n");
return -EREMOTEIO; /* got a better one ?? */
}
-#endif
}
- if (last) {
+ if (last)
i2c_stop(adap);
- }
- else {
+ else
i2c_repstart(adap);
- }
- return (wrcount);
+ return wrcount;
}
-
static int pcf_readbytes(struct i2c_adapter *i2c_adap, char *buf,
- int count, int last)
+ int count, int last)
{
int i, status;
struct i2c_algo_pcf_data *adap = i2c_adap->algo_data;
@@ -267,42 +261,36 @@ static int pcf_readbytes(struct i2c_adapter *i2c_adap, char *buf,
for (i = 0; i <= count; i++) {
if ((wfp = wait_for_pin(adap, &status))) {
- if (wfp == -EINTR) {
- /* arbitration lost */
- return -EINTR;
- }
+ if (wfp == -EINTR)
+ return -EINTR; /* arbitration lost */
+
i2c_stop(adap);
dev_err(&i2c_adap->dev, "pcf_readbytes timed out.\n");
- return (-1);
+ return -1;
}
-#ifndef STUB_I2C
if ((status & I2C_PCF_LRB) && (i != count)) {
i2c_stop(adap);
dev_err(&i2c_adap->dev, "i2c_read: i2c_inb, No ack.\n");
- return (-1);
+ return -1;
}
-#endif
-
+
if (i == count - 1) {
set_pcf(adap, 1, I2C_PCF_ESO);
- } else
- if (i == count) {
- if (last) {
+ } else if (i == count) {
+ if (last)
i2c_stop(adap);
- } else {
+ else
i2c_repstart(adap);
- }
- };
+ }
- if (i) {
+ if (i)
buf[i - 1] = i2c_inb(adap);
- } else {
+ else
i2c_inb(adap); /* dummy read */
- }
}
- return (i - 1);
+ return i - 1;
}
@@ -323,14 +311,14 @@ static int pcf_doAddress(struct i2c_algo_pcf_data *adap,
}
static int pcf_xfer(struct i2c_adapter *i2c_adap,
- struct i2c_msg *msgs,
+ struct i2c_msg *msgs,
int num)
{
struct i2c_algo_pcf_data *adap = i2c_adap->algo_data;
struct i2c_msg *pmsg;
int i;
int ret=0, timeout, status;
-
+
if (adap->xfer_begin)
adap->xfer_begin(adap->data);
@@ -338,25 +326,24 @@ static int pcf_xfer(struct i2c_adapter *i2c_adap,
timeout = wait_for_bb(adap);
if (timeout) {
DEB2(printk(KERN_ERR "i2c-algo-pcf.o: "
- "Timeout waiting for BB in pcf_xfer\n");)
+ "Timeout waiting for BB in pcf_xfer\n");)
i = -EIO;
goto out;
}
-
+
for (i = 0;ret >= 0 && i < num; i++) {
pmsg = &msgs[i];
DEB2(printk(KERN_DEBUG "i2c-algo-pcf.o: Doing %s %d bytes to 0x%02x - %d of %d messages\n",
pmsg->flags & I2C_M_RD ? "read" : "write",
- pmsg->len, pmsg->addr, i + 1, num);)
-
+ pmsg->len, pmsg->addr, i + 1, num);)
+
ret = pcf_doAddress(adap, pmsg);
/* Send START */
- if (i == 0) {
- i2c_start(adap);
- }
-
+ if (i == 0)
+ i2c_start(adap);
+
/* Wait for PIN (pending interrupt NOT) */
timeout = wait_for_pin(adap, &status);
if (timeout) {
@@ -371,8 +358,7 @@ static int pcf_xfer(struct i2c_adapter *i2c_adap,
i = -EREMOTEIO;
goto out;
}
-
-#ifndef STUB_I2C
+
/* Check LRB (last rcvd bit - slave ack) */
if (status & I2C_PCF_LRB) {
i2c_stop(adap);
@@ -380,27 +366,24 @@ static int pcf_xfer(struct i2c_adapter *i2c_adap,
i = -EREMOTEIO;
goto out;
}
-#endif
-
+
DEB3(printk(KERN_DEBUG "i2c-algo-pcf.o: Msg %d, addr=0x%x, flags=0x%x, len=%d\n",
i, msgs[i].addr, msgs[i].flags, msgs[i].len);)
-
- /* Read */
+
if (pmsg->flags & I2C_M_RD) {
- /* read bytes into buffer*/
ret = pcf_readbytes(i2c_adap, pmsg->buf, pmsg->len,
- (i + 1 == num));
-
+ (i + 1 == num));
+
if (ret != pmsg->len) {
DEB2(printk(KERN_DEBUG "i2c-algo-pcf.o: fail: "
"only read %d bytes.\n",ret));
} else {
DEB2(printk(KERN_DEBUG "i2c-algo-pcf.o: read %d bytes.\n",ret));
}
- } else { /* Write */
+ } else {
ret = pcf_sendbytes(i2c_adap, pmsg->buf, pmsg->len,
- (i + 1 == num));
-
+ (i + 1 == num));
+
if (ret != pmsg->len) {
DEB2(printk(KERN_DEBUG "i2c-algo-pcf.o: fail: "
"only wrote %d bytes.\n",ret));
@@ -413,24 +396,23 @@ static int pcf_xfer(struct i2c_adapter *i2c_adap,
out:
if (adap->xfer_end)
adap->xfer_end(adap->data);
- return (i);
+ return i;
}
static u32 pcf_func(struct i2c_adapter *adap)
{
- return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL |
+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL |
I2C_FUNC_PROTOCOL_MANGLING;
}
-/* -----exported algorithm data: ------------------------------------- */
-
+/* exported algorithm data: */
static const struct i2c_algorithm pcf_algo = {
.master_xfer = pcf_xfer,
.functionality = pcf_func,
};
-/*
- * registering functions to load algorithms at runtime
+/*
+ * registering functions to load algorithms at runtime
*/
int i2c_pcf_add_bus(struct i2c_adapter *adap)
{
@@ -441,7 +423,6 @@ int i2c_pcf_add_bus(struct i2c_adapter *adap)
/* register new adapter to i2c module... */
adap->algo = &pcf_algo;
- adap->timeout = 100;
if ((rval = pcf_init_8584(pcf_adap)))
return rval;
@@ -458,4 +439,4 @@ MODULE_LICENSE("GPL");
module_param(i2c_debug, int, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(i2c_debug,
- "debug level - 0 off; 1 normal; 2,3 more verbose; 9 pcf-protocol");
+ "debug level - 0 off; 1 normal; 2,3 more verbose; 9 pcf-protocol");
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 7f95905bbb9..da809ad0996 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -132,6 +132,7 @@ config I2C_PIIX4
Serverworks CSB5
Serverworks CSB6
Serverworks HT-1000
+ Serverworks HT-1100
SMSC Victory66
This driver can also be built as a module. If so, the module
@@ -617,12 +618,12 @@ config I2C_ELEKTOR
will be called i2c-elektor.
config I2C_PCA_ISA
- tristate "PCA9564 on an ISA bus"
+ tristate "PCA9564/PCA9665 on an ISA bus"
depends on ISA
select I2C_ALGOPCA
default n
help
- This driver supports ISA boards using the Philips PCA9564
+ This driver supports ISA boards using the Philips PCA9564/PCA9665
parallel bus to I2C bus controller.
This driver can also be built as a module. If so, the module
@@ -634,11 +635,11 @@ config I2C_PCA_ISA
time). If unsure, say N.
config I2C_PCA_PLATFORM
- tristate "PCA9564 as platform device"
+ tristate "PCA9564/PCA9665 as platform device"
select I2C_ALGOPCA
default n
help
- This driver supports a memory mapped Philips PCA9564
+ This driver supports a memory mapped Philips PCA9564/PCA9665
parallel bus to I2C bus controller.
This driver can also be built as a module. If so, the module
diff --git a/drivers/i2c/busses/i2c-acorn.c b/drivers/i2c/busses/i2c-acorn.c
index 9aefb5e5864..86796488ef4 100644
--- a/drivers/i2c/busses/i2c-acorn.c
+++ b/drivers/i2c/busses/i2c-acorn.c
@@ -15,9 +15,9 @@
#include <linux/init.h>
#include <linux/i2c.h>
#include <linux/i2c-algo-bit.h>
+#include <linux/io.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/hardware/ioc.h>
#include <asm/system.h>
diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c
index 5d7789834b9..3fae3a91ce5 100644
--- a/drivers/i2c/busses/i2c-davinci.c
+++ b/drivers/i2c/busses/i2c-davinci.c
@@ -216,7 +216,7 @@ static int i2c_davinci_wait_bus_not_busy(struct davinci_i2c_dev *dev,
{
unsigned long timeout;
- timeout = jiffies + DAVINCI_I2C_TIMEOUT;
+ timeout = jiffies + dev->adapter.timeout;
while (davinci_i2c_read_reg(dev, DAVINCI_I2C_STR_REG)
& DAVINCI_I2C_STR_BB) {
if (time_after(jiffies, timeout)) {
@@ -289,7 +289,7 @@ i2c_davinci_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, int stop)
davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, flag);
r = wait_for_completion_interruptible_timeout(&dev->cmd_complete,
- DAVINCI_I2C_TIMEOUT);
+ dev->adapter.timeout);
if (r == 0) {
dev_err(dev->dev, "controller timed out\n");
i2c_davinci_init(dev);
@@ -546,9 +546,7 @@ static int davinci_i2c_probe(struct platform_device *pdev)
strlcpy(adap->name, "DaVinci I2C adapter", sizeof(adap->name));
adap->algo = &i2c_davinci_algo;
adap->dev.parent = &pdev->dev;
-
- /* FIXME */
- adap->timeout = 1;
+ adap->timeout = DAVINCI_I2C_TIMEOUT;
adap->nr = pdev->id;
r = i2c_add_numbered_adapter(adap);
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 230238df56c..10411848fd7 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -65,6 +65,7 @@
#include <linux/i2c.h>
#include <linux/acpi.h>
#include <linux/io.h>
+#include <linux/dmi.h>
/* I801 SMBus address offsets */
#define SMBHSTSTS (0 + i801_smba)
@@ -616,10 +617,81 @@ static void __init input_apanel_init(void)
static void __init input_apanel_init(void) {}
#endif
+#if defined CONFIG_SENSORS_FSCHMD || defined CONFIG_SENSORS_FSCHMD_MODULE
+struct dmi_onboard_device_info {
+ const char *name;
+ u8 type;
+ unsigned short i2c_addr;
+ const char *i2c_type;
+};
+
+static struct dmi_onboard_device_info __devinitdata dmi_devices[] = {
+ { "Syleus", DMI_DEV_TYPE_OTHER, 0x73, "fscsyl" },
+ { "Hermes", DMI_DEV_TYPE_OTHER, 0x73, "fscher" },
+ { "Hades", DMI_DEV_TYPE_OTHER, 0x73, "fschds" },
+};
+
+static void __devinit dmi_check_onboard_device(u8 type, const char *name,
+ struct i2c_adapter *adap)
+{
+ int i;
+ struct i2c_board_info info;
+
+ for (i = 0; i < ARRAY_SIZE(dmi_devices); i++) {
+ /* & ~0x80, ignore enabled/disabled bit */
+ if ((type & ~0x80) != dmi_devices[i].type)
+ continue;
+ if (strcmp(name, dmi_devices[i].name))
+ continue;
+
+ memset(&info, 0, sizeof(struct i2c_board_info));
+ info.addr = dmi_devices[i].i2c_addr;
+ strlcpy(info.type, dmi_devices[i].i2c_type, I2C_NAME_SIZE);
+ i2c_new_device(adap, &info);
+ break;
+ }
+}
+
+/* We use our own function to check for onboard devices instead of
+ dmi_find_device() as some buggy BIOS's have the devices we are interested
+ in marked as disabled */
+static void __devinit dmi_check_onboard_devices(const struct dmi_header *dm,
+ void *adap)
+{
+ int i, count;
+
+ if (dm->type != 10)
+ return;
+
+ count = (dm->length - sizeof(struct dmi_header)) / 2;
+ for (i = 0; i < count; i++) {
+ const u8 *d = (char *)(dm + 1) + (i * 2);
+ const char *name = ((char *) dm) + dm->length;
+ u8 type = d[0];
+ u8 s = d[1];
+
+ if (!s)
+ continue;
+ s--;
+ while (s > 0 && name[0]) {
+ name += strlen(name) + 1;
+ s--;
+ }
+ if (name[0] == 0) /* Bogus string reference */
+ continue;
+
+ dmi_check_onboard_device(type, name, adap);
+ }
+}
+#endif
+
static int __devinit i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
{
unsigned char temp;
int err;
+#if defined CONFIG_SENSORS_FSCHMD || defined CONFIG_SENSORS_FSCHMD_MODULE
+ const char *vendor;
+#endif
I801_dev = dev;
i801_features = 0;
@@ -712,6 +784,11 @@ static int __devinit i801_probe(struct pci_dev *dev, const struct pci_device_id
i2c_new_device(&i801_adapter, &info);
}
#endif
+#if defined CONFIG_SENSORS_FSCHMD || defined CONFIG_SENSORS_FSCHMD_MODULE
+ vendor = dmi_get_system_info(DMI_BOARD_VENDOR);
+ if (vendor && !strcmp(vendor, "FUJITSU SIEMENS"))
+ dmi_walk(dmi_check_onboard_devices, &i801_adapter);
+#endif
return 0;
diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c
index 88f0db73b36..8b92a4666e0 100644
--- a/drivers/i2c/busses/i2c-ibm_iic.c
+++ b/drivers/i2c/busses/i2c-ibm_iic.c
@@ -415,7 +415,7 @@ static int iic_wait_for_tc(struct ibm_iic_private* dev){
if (dev->irq >= 0){
/* Interrupt mode */
ret = wait_event_interruptible_timeout(dev->wq,
- !(in_8(&iic->sts) & STS_PT), dev->adap.timeout * HZ);
+ !(in_8(&iic->sts) & STS_PT), dev->adap.timeout);
if (unlikely(ret < 0))
DBG("%d: wait interrupted\n", dev->idx);
@@ -426,7 +426,7 @@ static int iic_wait_for_tc(struct ibm_iic_private* dev){
}
else {
/* Polling mode */
- unsigned long x = jiffies + dev->adap.timeout * HZ;
+ unsigned long x = jiffies + dev->adap.timeout;
while (in_8(&iic->sts) & STS_PT){
if (unlikely(time_after(jiffies, x))){
@@ -748,7 +748,7 @@ static int __devinit iic_probe(struct of_device *ofdev,
i2c_set_adapdata(adap, dev);
adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
adap->algo = &iic_algo;
- adap->timeout = 1;
+ adap->timeout = HZ;
ret = i2c_add_adapter(adap);
if (ret < 0) {
diff --git a/drivers/i2c/busses/i2c-iop3xx.c b/drivers/i2c/busses/i2c-iop3xx.c
index 3190690c26c..a75c75e77b9 100644
--- a/drivers/i2c/busses/i2c-iop3xx.c
+++ b/drivers/i2c/busses/i2c-iop3xx.c
@@ -488,7 +488,7 @@ iop3xx_i2c_probe(struct platform_device *pdev)
/*
* Default values...should these come in from board code?
*/
- new_adapter->timeout = 100;
+ new_adapter->timeout = HZ;
new_adapter->algo = &iop3xx_i2c_algo;
init_waitqueue_head(&adapter_data->waitq);
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index aedbbe6618d..26bf3701058 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -70,7 +70,7 @@ static irqreturn_t mpc_i2c_isr(int irq, void *dev_id)
/* Read again to allow register to stabilise */
i2c->interrupt = readb(i2c->base + MPC_I2C_SR);
writeb(0, i2c->base + MPC_I2C_SR);
- wake_up_interruptible(&i2c->queue);
+ wake_up(&i2c->queue);
}
return IRQ_HANDLED;
}
@@ -115,13 +115,10 @@ static int i2c_wait(struct mpc_i2c *i2c, unsigned timeout, int writing)
writeb(0, i2c->base + MPC_I2C_SR);
} else {
/* Interrupt mode */
- result = wait_event_interruptible_timeout(i2c->queue,
- (i2c->interrupt & CSR_MIF), timeout * HZ);
+ result = wait_event_timeout(i2c->queue,
+ (i2c->interrupt & CSR_MIF), timeout);
- if (unlikely(result < 0)) {
- pr_debug("I2C: wait interrupted\n");
- writeccr(i2c, 0);
- } else if (unlikely(!(i2c->interrupt & CSR_MIF))) {
+ if (unlikely(!(i2c->interrupt & CSR_MIF))) {
pr_debug("I2C: wait timeout\n");
writeccr(i2c, 0);
result = -ETIMEDOUT;
@@ -311,7 +308,7 @@ static struct i2c_adapter mpc_ops = {
.owner = THIS_MODULE,
.name = "MPC adapter",
.algo = &mpc_algo,
- .timeout = 1,
+ .timeout = HZ,
};
static int __devinit fsl_i2c_probe(struct of_device *op, const struct of_device_id *match)
diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c
index 7f186bbcb99..5a4945d1dba 100644
--- a/drivers/i2c/busses/i2c-mv64xxx.c
+++ b/drivers/i2c/busses/i2c-mv64xxx.c
@@ -358,7 +358,7 @@ mv64xxx_i2c_wait_for_completion(struct mv64xxx_i2c_data *drv_data)
char abort = 0;
time_left = wait_event_interruptible_timeout(drv_data->waitq,
- !drv_data->block, msecs_to_jiffies(drv_data->adapter.timeout));
+ !drv_data->block, drv_data->adapter.timeout);
spin_lock_irqsave(&drv_data->lock, flags);
if (!time_left) { /* Timed out */
@@ -374,8 +374,7 @@ mv64xxx_i2c_wait_for_completion(struct mv64xxx_i2c_data *drv_data)
spin_unlock_irqrestore(&drv_data->lock, flags);
time_left = wait_event_timeout(drv_data->waitq,
- !drv_data->block,
- msecs_to_jiffies(drv_data->adapter.timeout));
+ !drv_data->block, drv_data->adapter.timeout);
if ((time_left <= 0) && drv_data->block) {
drv_data->state = MV64XXX_I2C_STATE_IDLE;
@@ -530,7 +529,7 @@ mv64xxx_i2c_probe(struct platform_device *pd)
drv_data->adapter.algo = &mv64xxx_i2c_algo;
drv_data->adapter.owner = THIS_MODULE;
drv_data->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
- drv_data->adapter.timeout = pdata->timeout;
+ drv_data->adapter.timeout = msecs_to_jiffies(pdata->timeout);
drv_data->adapter.nr = pd->id;
platform_set_drvdata(pd, drv_data);
i2c_set_adapdata(&drv_data->adapter, drv_data);
diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c
index 05af6cd7f27..2ff4683703a 100644
--- a/drivers/i2c/busses/i2c-nforce2.c
+++ b/drivers/i2c/busses/i2c-nforce2.c
@@ -31,10 +31,14 @@
nForce3 250Gb MCP 00E4
nForce4 MCP 0052
nForce4 MCP-04 0034
- nForce4 MCP51 0264
- nForce4 MCP55 0368
+ nForce MCP51 0264
+ nForce MCP55 0368
nForce MCP61 03EB
nForce MCP65 0446
+ nForce MCP67 0542
+ nForce MCP73 07D8
+ nForce MCP78S 0752
+ nForce MCP79 0AA2
This driver supports the 2 SMBuses that are included in the MCP of the
nForce2/3/4/5xx chipsets.
@@ -315,6 +319,10 @@ static struct pci_device_id nforce2_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP65_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP67_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP73_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP78S_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP79_SMBUS) },
{ 0 }
};
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index be8ee2cac8b..ece0125a1ee 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -193,22 +193,24 @@ static inline u16 omap_i2c_read_reg(struct omap_i2c_dev *i2c_dev, int reg)
static int __init omap_i2c_get_clocks(struct omap_i2c_dev *dev)
{
- if (cpu_is_omap16xx() || cpu_class_is_omap2()) {
- dev->iclk = clk_get(dev->dev, "i2c_ick");
- if (IS_ERR(dev->iclk)) {
- dev->iclk = NULL;
- return -ENODEV;
- }
+ int ret;
+
+ dev->iclk = clk_get(dev->dev, "ick");
+ if (IS_ERR(dev->iclk)) {
+ ret = PTR_ERR(dev->iclk);
+ dev->iclk = NULL;
+ return ret;
}
- dev->fclk = clk_get(dev->dev, "i2c_fck");
+ dev->fclk = clk_get(dev->dev, "fck");
if (IS_ERR(dev->fclk)) {
+ ret = PTR_ERR(dev->fclk);
if (dev->iclk != NULL) {
clk_put(dev->iclk);
dev->iclk = NULL;
}
dev->fclk = NULL;
- return -ENODEV;
+ return ret;
}
return 0;
@@ -218,18 +220,15 @@ static void omap_i2c_put_clocks(struct omap_i2c_dev *dev)
{
clk_put(dev->fclk);
dev->fclk = NULL;
- if (dev->iclk != NULL) {
- clk_put(dev->iclk);
- dev->iclk = NULL;
- }
+ clk_put(dev->iclk);
+ dev->iclk = NULL;
}
static void omap_i2c_unidle(struct omap_i2c_dev *dev)
{
WARN_ON(!dev->idle);
- if (dev->iclk != NULL)
- clk_enable(dev->iclk);
+ clk_enable(dev->iclk);
clk_enable(dev->fclk);
dev->idle = 0;
if (dev->iestate)
@@ -254,8 +253,7 @@ static void omap_i2c_idle(struct omap_i2c_dev *dev)
}
dev->idle = 1;
clk_disable(dev->fclk);
- if (dev->iclk != NULL)
- clk_disable(dev->iclk);
+ clk_disable(dev->iclk);
}
static int omap_i2c_init(struct omap_i2c_dev *dev)
@@ -312,15 +310,14 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
if (cpu_class_is_omap1()) {
- struct clk *armxor_ck;
-
- armxor_ck = clk_get(NULL, "armxor_ck");
- if (IS_ERR(armxor_ck))
- dev_warn(dev->dev, "Could not get armxor_ck\n");
- else {
- fclk_rate = clk_get_rate(armxor_ck);
- clk_put(armxor_ck);
- }
+ /*
+ * The I2C functional clock is the armxor_ck, so there's
+ * no need to get "armxor_ck" separately. Now, if OMAP2420
+ * always returns 12MHz for the functional clock, we can
+ * do this bit unconditionally.
+ */
+ fclk_rate = clk_get_rate(dev->fclk);
+
/* TRM for 5912 says the I2C clock must be prescaled to be
* between 7 - 12 MHz. The XOR input clock is typically
* 12, 13 or 19.2 MHz. So we should have code that produces:
diff --git a/drivers/i2c/busses/i2c-pca-isa.c b/drivers/i2c/busses/i2c-pca-isa.c
index 4aa8138cb0a..0ed68e2ccd2 100644
--- a/drivers/i2c/busses/i2c-pca-isa.c
+++ b/drivers/i2c/busses/i2c-pca-isa.c
@@ -23,6 +23,7 @@
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/delay.h>
+#include <linux/jiffies.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/wait.h>
@@ -41,15 +42,17 @@ static int irq = -1;
/* Data sheet recommends 59kHz for 100kHz operation due to variation
* in the actual clock rate */
-static int clock = I2C_PCA_CON_59kHz;
+static int clock = 59000;
+static struct i2c_adapter pca_isa_ops;
static wait_queue_head_t pca_wait;
static void pca_isa_writebyte(void *pd, int reg, int val)
{
#ifdef DEBUG_IO
static char *names[] = { "T/O", "DAT", "ADR", "CON" };
- printk("*** write %s at %#lx <= %#04x\n", names[reg], base+reg, val);
+ printk(KERN_DEBUG "*** write %s at %#lx <= %#04x\n", names[reg],
+ base+reg, val);
#endif
outb(val, base+reg);
}
@@ -60,7 +63,7 @@ static int pca_isa_readbyte(void *pd, int reg)
#ifdef DEBUG_IO
{
static char *names[] = { "STA", "DAT", "ADR", "CON" };
- printk("*** read %s => %#04x\n", names[reg], res);
+ printk(KERN_DEBUG "*** read %s => %#04x\n", names[reg], res);
}
#endif
return res;
@@ -68,16 +71,22 @@ static int pca_isa_readbyte(void *pd, int reg)
static int pca_isa_waitforcompletion(void *pd)
{
- int ret = 0;
+ long ret = ~0;
+ unsigned long timeout;
if (irq > -1) {
- ret = wait_event_interruptible(pca_wait,
- pca_isa_readbyte(pd, I2C_PCA_CON) & I2C_PCA_CON_SI);
+ ret = wait_event_interruptible_timeout(pca_wait,
+ pca_isa_readbyte(pd, I2C_PCA_CON)
+ & I2C_PCA_CON_SI, pca_isa_ops.timeout);
} else {
- while ((pca_isa_readbyte(pd, I2C_PCA_CON) & I2C_PCA_CON_SI) == 0)
+ /* Do polling */
+ timeout = jiffies + pca_isa_ops.timeout;
+ while (((pca_isa_readbyte(pd, I2C_PCA_CON)
+ & I2C_PCA_CON_SI) == 0)
+ && (ret = time_before(jiffies, timeout)))
udelay(100);
}
- return ret;
+ return ret > 0;
}
static void pca_isa_resetchip(void *pd)
@@ -102,8 +111,8 @@ static struct i2c_algo_pca_data pca_isa_data = {
static struct i2c_adapter pca_isa_ops = {
.owner = THIS_MODULE,
.algo_data = &pca_isa_data,
- .name = "PCA9564 ISA Adapter",
- .timeout = 100,
+ .name = "PCA9564/PCA9665 ISA Adapter",
+ .timeout = HZ,
};
static int __devinit pca_isa_match(struct device *dev, unsigned int id)
@@ -195,7 +204,7 @@ static void __exit pca_isa_exit(void)
}
MODULE_AUTHOR("Ian Campbell <icampbell@arcom.com>");
-MODULE_DESCRIPTION("ISA base PCA9564 driver");
+MODULE_DESCRIPTION("ISA base PCA9564/PCA9665 driver");
MODULE_LICENSE("GPL");
module_param(base, ulong, 0);
@@ -204,7 +213,13 @@ MODULE_PARM_DESC(base, "I/O base address");
module_param(irq, int, 0);
MODULE_PARM_DESC(irq, "IRQ");
module_param(clock, int, 0);
-MODULE_PARM_DESC(clock, "Clock rate as described in table 1 of PCA9564 datasheet");
+MODULE_PARM_DESC(clock, "Clock rate in hertz.\n\t\t"
+ "For PCA9564: 330000,288000,217000,146000,"
+ "88000,59000,44000,36000\n"
+ "\t\tFor PCA9665:\tStandard: 60300 - 100099\n"
+ "\t\t\t\tFast: 100100 - 400099\n"
+ "\t\t\t\tFast+: 400100 - 10000099\n"
+ "\t\t\t\tTurbo: Up to 1265800");
module_init(pca_isa_init);
module_exit(pca_isa_exit);
diff --git a/drivers/i2c/busses/i2c-pca-platform.c b/drivers/i2c/busses/i2c-pca-platform.c
index 6bb15ad0a6b..7b23891b7d5 100644
--- a/drivers/i2c/busses/i2c-pca-platform.c
+++ b/drivers/i2c/busses/i2c-pca-platform.c
@@ -15,6 +15,7 @@
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/delay.h>
+#include <linux/jiffies.h>
#include <linux/errno.h>
#include <linux/i2c.h>
#include <linux/interrupt.h>
@@ -81,24 +82,23 @@ static void i2c_pca_pf_writebyte32(void *pd, int reg, int val)
static int i2c_pca_pf_waitforcompletion(void *pd)
{
struct i2c_pca_pf_data *i2c = pd;
- int ret = 0;
+ long ret = ~0;
+ unsigned long timeout;
if (i2c->irq) {
- ret = wait_event_interruptible(i2c->wait,
+ ret = wait_event_interruptible_timeout(i2c->wait,
i2c->algo_data.read_byte(i2c, I2C_PCA_CON)
- & I2C_PCA_CON_SI);
+ & I2C_PCA_CON_SI, i2c->adap.timeout);
} else {
- /*
- * Do polling...
- * XXX: Could get stuck in extreme cases!
- * Maybe add timeout, but using irqs is preferred anyhow.
- */
- while ((i2c->algo_data.read_byte(i2c, I2C_PCA_CON)
+ /* Do polling */
+ timeout = jiffies + i2c->adap.timeout;
+ while (((i2c->algo_data.read_byte(i2c, I2C_PCA_CON)
& I2C_PCA_CON_SI) == 0)
+ && (ret = time_before(jiffies, timeout)))
udelay(100);
}
- return ret;
+ return ret > 0;
}
static void i2c_pca_pf_dummyreset(void *pd)
@@ -172,14 +172,25 @@ static int __devinit i2c_pca_pf_probe(struct platform_device *pdev)
i2c->adap.nr = pdev->id >= 0 ? pdev->id : 0;
i2c->adap.owner = THIS_MODULE;
- snprintf(i2c->adap.name, sizeof(i2c->adap.name), "PCA9564 at 0x%08lx",
- (unsigned long) res->start);
+ snprintf(i2c->adap.name, sizeof(i2c->adap.name),
+ "PCA9564/PCA9665 at 0x%08lx",
+ (unsigned long) res->start);
i2c->adap.algo_data = &i2c->algo_data;
i2c->adap.dev.parent = &pdev->dev;
- i2c->adap.timeout = platform_data->timeout;
- i2c->algo_data.i2c_clock = platform_data->i2c_clock_speed;
+ if (platform_data) {
+ i2c->adap.timeout = platform_data->timeout;
+ i2c->algo_data.i2c_clock = platform_data->i2c_clock_speed;
+ i2c->gpio = platform_data->gpio;
+ } else {
+ i2c->adap.timeout = HZ;
+ i2c->algo_data.i2c_clock = 59000;
+ i2c->gpio = -1;
+ }
+
i2c->algo_data.data = i2c;
+ i2c->algo_data.wait_for_completion = i2c_pca_pf_waitforcompletion;
+ i2c->algo_data.reset_chip = i2c_pca_pf_dummyreset;
switch (res->flags & IORESOURCE_MEM_TYPE_MASK) {
case IORESOURCE_MEM_32BIT:
@@ -197,11 +208,6 @@ static int __devinit i2c_pca_pf_probe(struct platform_device *pdev)
break;
}
- i2c->algo_data.wait_for_completion = i2c_pca_pf_waitforcompletion;
-
- i2c->gpio = platform_data->gpio;
- i2c->algo_data.reset_chip = i2c_pca_pf_dummyreset;
-
/* Use gpio_is_valid() when in mainline */
if (i2c->gpio > -1) {
ret = gpio_request(i2c->gpio, i2c->adap.name);
@@ -246,7 +252,7 @@ e_remap:
e_alloc:
release_mem_region(res->start, res_len(res));
e_print:
- printk(KERN_ERR "Registering PCA9564 FAILED! (%d)\n", ret);
+ printk(KERN_ERR "Registering PCA9564/PCA9665 FAILED! (%d)\n", ret);
return ret;
}
@@ -290,7 +296,7 @@ static void __exit i2c_pca_pf_exit(void)
}
MODULE_AUTHOR("Wolfram Sang <w.sang@pengutronix.de>");
-MODULE_DESCRIPTION("I2C-PCA9564 platform driver");
+MODULE_DESCRIPTION("I2C-PCA9564/PCA9665 platform driver");
MODULE_LICENSE("GPL");
module_init(i2c_pca_pf_init);
diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
index 761f9dd5362..0249a7d762b 100644
--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -20,7 +20,7 @@
/*
Supports:
Intel PIIX4, 440MX
- Serverworks OSB4, CSB5, CSB6, HT-1000
+ Serverworks OSB4, CSB5, CSB6, HT-1000, HT-1100
ATI IXP200, IXP300, IXP400, SB600, SB700, SB800
SMSC Victory66
@@ -226,6 +226,70 @@ static int __devinit piix4_setup(struct pci_dev *PIIX4_dev,
return 0;
}
+static int __devinit piix4_setup_sb800(struct pci_dev *PIIX4_dev,
+ const struct pci_device_id *id)
+{
+ unsigned short smba_idx = 0xcd6;
+ u8 smba_en_lo, smba_en_hi, i2ccfg, i2ccfg_offset = 0x10, smb_en = 0x2c;
+
+ /* SB800 SMBus does not support forcing address */
+ if (force || force_addr) {
+ dev_err(&PIIX4_dev->dev, "SB800 SMBus does not support "
+ "forcing address!\n");
+ return -EINVAL;
+ }
+
+ /* Determine the address of the SMBus areas */
+ if (!request_region(smba_idx, 2, "smba_idx")) {
+ dev_err(&PIIX4_dev->dev, "SMBus base address index region "
+ "0x%x already in use!\n", smba_idx);
+ return -EBUSY;
+ }
+ outb_p(smb_en, smba_idx);
+ smba_en_lo = inb_p(smba_idx + 1);
+ outb_p(smb_en + 1, smba_idx);
+ smba_en_hi = inb_p(smba_idx + 1);
+ release_region(smba_idx, 2);
+
+ if ((smba_en_lo & 1) == 0) {
+ dev_err(&PIIX4_dev->dev,
+ "Host SMBus controller not enabled!\n");
+ return -ENODEV;
+ }
+
+ piix4_smba = ((smba_en_hi << 8) | smba_en_lo) & 0xffe0;
+ if (acpi_check_region(piix4_smba, SMBIOSIZE, piix4_driver.name))
+ return -EBUSY;
+
+ if (!request_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) {
+ dev_err(&PIIX4_dev->dev, "SMBus region 0x%x already in use!\n",
+ piix4_smba);
+ return -EBUSY;
+ }
+
+ /* Request the SMBus I2C bus config region */
+ if (!request_region(piix4_smba + i2ccfg_offset, 1, "i2ccfg")) {
+ dev_err(&PIIX4_dev->dev, "SMBus I2C bus config region "
+ "0x%x already in use!\n", piix4_smba + i2ccfg_offset);
+ release_region(piix4_smba, SMBIOSIZE);
+ piix4_smba = 0;
+ return -EBUSY;
+ }
+ i2ccfg = inb_p(piix4_smba + i2ccfg_offset);
+ release_region(piix4_smba + i2ccfg_offset, 1);
+
+ if (i2ccfg & 1)
+ dev_dbg(&PIIX4_dev->dev, "Using IRQ for SMBus.\n");
+ else
+ dev_dbg(&PIIX4_dev->dev, "Using SMI# for SMBus.\n");
+
+ dev_info(&PIIX4_dev->dev,
+ "SMBus Host Controller at 0x%x, revision %d\n",
+ piix4_smba, i2ccfg >> 4);
+
+ return 0;
+}
+
static int piix4_transaction(void)
{
int temp;
@@ -423,6 +487,8 @@ static struct pci_device_id piix4_ids[] = {
PCI_DEVICE_ID_SERVERWORKS_CSB6) },
{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS,
PCI_DEVICE_ID_SERVERWORKS_HT1000SB) },
+ { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS,
+ PCI_DEVICE_ID_SERVERWORKS_HT1100LD) },
{ 0, }
};
@@ -433,7 +499,14 @@ static int __devinit piix4_probe(struct pci_dev *dev,
{
int retval;
- retval = piix4_setup(dev, id);
+ if ((dev->vendor == PCI_VENDOR_ID_ATI) &&
+ (dev->device == PCI_DEVICE_ID_ATI_SBX00_SMBUS) &&
+ (dev->revision >= 0x40))
+ /* base address location etc changed in SB800 */
+ retval = piix4_setup_sb800(dev, id);
+ else
+ retval = piix4_setup(dev, id);
+
if (retval)
return retval;
diff --git a/drivers/i2c/busses/i2c-powermac.c b/drivers/i2c/busses/i2c-powermac.c
index 60ca91745e5..3c9d71f6018 100644
--- a/drivers/i2c/busses/i2c-powermac.c
+++ b/drivers/i2c/busses/i2c-powermac.c
@@ -191,7 +191,8 @@ static int __devexit i2c_powermac_remove(struct platform_device *dev)
i2c_set_adapdata(adapter, NULL);
/* We aren't that prepared to deal with this... */
if (rc)
- printk("i2c-powermac.c: Failed to remove bus %s !\n",
+ printk(KERN_WARNING
+ "i2c-powermac.c: Failed to remove bus %s !\n",
adapter->name);
platform_set_drvdata(dev, NULL);
kfree(adapter);
diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index bdb1f7510e9..c1405c8f6ba 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -210,11 +210,12 @@ static irqreturn_t i2c_pxa_handler(int this_irq, void *dev_id);
static void i2c_pxa_scream_blue_murder(struct pxa_i2c *i2c, const char *why)
{
unsigned int i;
- printk("i2c: error: %s\n", why);
- printk("i2c: msg_num: %d msg_idx: %d msg_ptr: %d\n",
+ printk(KERN_ERR "i2c: error: %s\n", why);
+ printk(KERN_ERR "i2c: msg_num: %d msg_idx: %d msg_ptr: %d\n",
i2c->msg_num, i2c->msg_idx, i2c->msg_ptr);
- printk("i2c: ICR: %08x ISR: %08x\n"
- "i2c: log: ", readl(_ICR(i2c)), readl(_ISR(i2c)));
+ printk(KERN_ERR "i2c: ICR: %08x ISR: %08x\n",
+ readl(_ICR(i2c)), readl(_ISR(i2c)));
+ printk(KERN_DEBUG "i2c: log: ");
for (i = 0; i < i2c->irqlogidx; i++)
printk("[%08x:%08x] ", i2c->isrlog[i], i2c->icrlog[i]);
printk("\n");
diff --git a/drivers/i2c/busses/i2c-versatile.c b/drivers/i2c/busses/i2c-versatile.c
index 4678babd3ce..fede619ba22 100644
--- a/drivers/i2c/busses/i2c-versatile.c
+++ b/drivers/i2c/busses/i2c-versatile.c
@@ -102,7 +102,13 @@ static int i2c_versatile_probe(struct platform_device *dev)
i2c->algo = i2c_versatile_algo;
i2c->algo.data = i2c;
- ret = i2c_bit_add_bus(&i2c->adap);
+ if (dev->id >= 0) {
+ /* static bus numbering */
+ i2c->adap.nr = dev->id;
+ ret = i2c_bit_add_numbered_bus(&i2c->adap);
+ } else
+ /* dynamic bus numbering */
+ ret = i2c_bit_add_bus(&i2c->adap);
if (ret >= 0) {
platform_set_drvdata(dev, i2c);
return 0;
@@ -146,7 +152,7 @@ static void __exit i2c_versatile_exit(void)
platform_driver_unregister(&i2c_versatile_driver);
}
-module_init(i2c_versatile_init);
+subsys_initcall(i2c_versatile_init);
module_exit(i2c_versatile_exit);
MODULE_DESCRIPTION("ARM Versatile I2C bus driver");
diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
index c80312c1f38..8f8c81eb0ae 100644
--- a/drivers/i2c/chips/Kconfig
+++ b/drivers/i2c/chips/Kconfig
@@ -64,19 +64,6 @@ config SENSORS_PCA9539
This driver is deprecated and will be dropped soon. Use
drivers/gpio/pca953x.c instead.
-config SENSORS_PCF8591
- tristate "Philips PCF8591"
- depends on EXPERIMENTAL
- default n
- help
- If you say yes here you get support for Philips PCF8591 chips.
-
- This driver can also be built as a module. If so, the module
- will be called pcf8591.
-
- These devices are hard to detect and rarely found on mainstream
- hardware. If unsure, say N.
-
config SENSORS_MAX6875
tristate "Maxim MAX6875 Power supply supervisor"
depends on EXPERIMENTAL
diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile
index d142f238a2d..55a37603718 100644
--- a/drivers/i2c/chips/Makefile
+++ b/drivers/i2c/chips/Makefile
@@ -15,7 +15,6 @@ obj-$(CONFIG_SENSORS_MAX6875) += max6875.o
obj-$(CONFIG_SENSORS_PCA9539) += pca9539.o
obj-$(CONFIG_SENSORS_PCF8574) += pcf8574.o
obj-$(CONFIG_PCF8575) += pcf8575.o
-obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o
obj-$(CONFIG_SENSORS_TSL2550) += tsl2550.o
ifeq ($(CONFIG_I2C_DEBUG_CHIP),y)
diff --git a/drivers/i2c/chips/pcf8591.c b/drivers/i2c/chips/pcf8591.c
deleted file mode 100644
index 16ce3e19377..00000000000
--- a/drivers/i2c/chips/pcf8591.c
+++ /dev/null
@@ -1,325 +0,0 @@
-/*
- Copyright (C) 2001-2004 Aurelien Jarno <aurelien@aurel32.net>
- Ported to Linux 2.6 by Aurelien Jarno <aurelien@aurel32.net> with
- the help of Jean Delvare <khali@linux-fr.org>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/i2c.h>
-#include <linux/mutex.h>
-
-/* Addresses to scan */
-static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, 0x4c,
- 0x4d, 0x4e, 0x4f, I2C_CLIENT_END };
-
-/* Insmod parameters */
-I2C_CLIENT_INSMOD_1(pcf8591);
-
-static int input_mode;
-module_param(input_mode, int, 0);
-MODULE_PARM_DESC(input_mode,
- "Analog input mode:\n"
- " 0 = four single ended inputs\n"
- " 1 = three differential inputs\n"
- " 2 = single ended and differential mixed\n"
- " 3 = two differential inputs\n");
-
-/* The PCF8591 control byte
- 7 6 5 4 3 2 1 0
- | 0 |AOEF| AIP | 0 |AINC| AICH | */
-
-/* Analog Output Enable Flag (analog output active if 1) */
-#define PCF8591_CONTROL_AOEF 0x40
-
-/* Analog Input Programming
- 0x00 = four single ended inputs
- 0x10 = three differential inputs
- 0x20 = single ended and differential mixed
- 0x30 = two differential inputs */
-#define PCF8591_CONTROL_AIP_MASK 0x30
-
-/* Autoincrement Flag (switch on if 1) */
-#define PCF8591_CONTROL_AINC 0x04
-
-/* Channel selection
- 0x00 = channel 0
- 0x01 = channel 1
- 0x02 = channel 2
- 0x03 = channel 3 */
-#define PCF8591_CONTROL_AICH_MASK 0x03
-
-/* Initial values */
-#define PCF8591_INIT_CONTROL ((input_mode << 4) | PCF8591_CONTROL_AOEF)
-#define PCF8591_INIT_AOUT 0 /* DAC out = 0 */
-
-/* Conversions */
-#define REG_TO_SIGNED(reg) (((reg) & 0x80)?((reg) - 256):(reg))
-
-struct pcf8591_data {
- struct mutex update_lock;
-
- u8 control;
- u8 aout;
-};
-
-static void pcf8591_init_client(struct i2c_client *client);
-static int pcf8591_read_channel(struct device *dev, int channel);
-
-/* following are the sysfs callback functions */
-#define show_in_channel(channel) \
-static ssize_t show_in##channel##_input(struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- return sprintf(buf, "%d\n", pcf8591_read_channel(dev, channel));\
-} \
-static DEVICE_ATTR(in##channel##_input, S_IRUGO, \
- show_in##channel##_input, NULL);
-
-show_in_channel(0);
-show_in_channel(1);
-show_in_channel(2);
-show_in_channel(3);
-
-static ssize_t show_out0_ouput(struct device *dev, struct device_attribute *attr, char *buf)
-{
- struct pcf8591_data *data = i2c_get_clientdata(to_i2c_client(dev));
- return sprintf(buf, "%d\n", data->aout * 10);
-}
-
-static ssize_t set_out0_output(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
-{
- unsigned int value;
- struct i2c_client *client = to_i2c_client(dev);
- struct pcf8591_data *data = i2c_get_clientdata(client);
- if ((value = (simple_strtoul(buf, NULL, 10) + 5) / 10) <= 255) {
- data->aout = value;
- i2c_smbus_write_byte_data(client, data->control, data->aout);
- return count;
- }
- return -EINVAL;
-}
-
-static DEVICE_ATTR(out0_output, S_IWUSR | S_IRUGO,
- show_out0_ouput, set_out0_output);
-
-static ssize_t show_out0_enable(struct device *dev, struct device_attribute *attr, char *buf)
-{
- struct pcf8591_data *data = i2c_get_clientdata(to_i2c_client(dev));
- return sprintf(buf, "%u\n", !(!(data->control & PCF8591_CONTROL_AOEF)));
-}
-
-static ssize_t set_out0_enable(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
-{
- struct i2c_client *client = to_i2c_client(dev);
- struct pcf8591_data *data = i2c_get_clientdata(client);
- unsigned long val = simple_strtoul(buf, NULL, 10);
-
- mutex_lock(&data->update_lock);
- if (val)
- data->control |= PCF8591_CONTROL_AOEF;
- else
- data->control &= ~PCF8591_CONTROL_AOEF;
- i2c_smbus_write_byte(client, data->control);
- mutex_unlock(&data->update_lock);
- return count;
-}
-
-static DEVICE_ATTR(out0_enable, S_IWUSR | S_IRUGO,
- show_out0_enable, set_out0_enable);
-
-static struct attribute *pcf8591_attributes[] = {
- &dev_attr_out0_enable.attr,
- &dev_attr_out0_output.attr,
- &dev_attr_in0_input.attr,
- &dev_attr_in1_input.attr,
- NULL
-};
-
-static const struct attribute_group pcf8591_attr_group = {
- .attrs = pcf8591_attributes,
-};
-
-static struct attribute *pcf8591_attributes_opt[] = {
- &dev_attr_in2_input.attr,
- &dev_attr_in3_input.attr,
- NULL
-};
-
-static const struct attribute_group pcf8591_attr_group_opt = {
- .attrs = pcf8591_attributes_opt,
-};
-
-/*
- * Real code
- */
-
-/* Return 0 if detection is successful, -ENODEV otherwise */
-static int pcf8591_detect(struct i2c_client *client, int kind,
- struct i2c_board_info *info)
-{
- struct i2c_adapter *adapter = client->adapter;
-
- if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE
- | I2C_FUNC_SMBUS_WRITE_BYTE_DATA))
- return -ENODEV;
-
- /* Now, we would do the remaining detection. But the PCF8591 is plainly
- impossible to detect! Stupid chip. */
-
- strlcpy(info->type, "pcf8591", I2C_NAME_SIZE);
-
- return 0;
-}
-
-static int pcf8591_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
-{
- struct pcf8591_data *data;
- int err;
-
- if (!(data = kzalloc(sizeof(struct pcf8591_data), GFP_KERNEL))) {
- err = -ENOMEM;
- goto exit;
- }
-
- i2c_set_clientdata(client, data);
- mutex_init(&data->update_lock);
-
- /* Initialize the PCF8591 chip */
- pcf8591_init_client(client);
-
- /* Register sysfs hooks */
- err = sysfs_create_group(&client->dev.kobj, &pcf8591_attr_group);
- if (err)
- goto exit_kfree;
-
- /* Register input2 if not in "two differential inputs" mode */
- if (input_mode != 3) {
- if ((err = device_create_file(&client->dev,
- &dev_attr_in2_input)))
- goto exit_sysfs_remove;
- }
-
- /* Register input3 only in "four single ended inputs" mode */
- if (input_mode == 0) {
- if ((err = device_create_file(&client->dev,
- &dev_attr_in3_input)))
- goto exit_sysfs_remove;
- }
-
- return 0;
-
-exit_sysfs_remove:
- sysfs_remove_group(&client->dev.kobj, &pcf8591_attr_group_opt);
- sysfs_remove_group(&client->dev.kobj, &pcf8591_attr_group);
-exit_kfree:
- kfree(data);
-exit:
- return err;
-}
-
-static int pcf8591_remove(struct i2c_client *client)
-{
- sysfs_remove_group(&client->dev.kobj, &pcf8591_attr_group_opt);
- sysfs_remove_group(&client->dev.kobj, &pcf8591_attr_group);
- kfree(i2c_get_clientdata(client));
- return 0;
-}
-
-/* Called when we have found a new PCF8591. */
-static void pcf8591_init_client(struct i2c_client *client)
-{
- struct pcf8591_data *data = i2c_get_clientdata(client);
- data->control = PCF8591_INIT_CONTROL;
- data->aout = PCF8591_INIT_AOUT;
-
- i2c_smbus_write_byte_data(client, data->control, data->aout);
-
- /* The first byte transmitted contains the conversion code of the
- previous read cycle. FLUSH IT! */
- i2c_smbus_read_byte(client);
-}
-
-static int pcf8591_read_channel(struct device *dev, int channel)
-{
- u8 value;
- struct i2c_client *client = to_i2c_client(dev);
- struct pcf8591_data *data = i2c_get_clientdata(client);
-
- mutex_lock(&data->update_lock);
-
- if ((data->control & PCF8591_CONTROL_AICH_MASK) != channel) {
- data->control = (data->control & ~PCF8591_CONTROL_AICH_MASK)
- | channel;
- i2c_smbus_write_byte(client, data->control);
-
- /* The first byte transmitted contains the conversion code of
- the previous read cycle. FLUSH IT! */
- i2c_smbus_read_byte(client);
- }
- value = i2c_smbus_read_byte(client);
-
- mutex_unlock(&data->update_lock);
-
- if ((channel == 2 && input_mode == 2) ||
- (channel != 3 && (input_mode == 1 || input_mode == 3)))
- return (10 * REG_TO_SIGNED(value));
- else
- return (10 * value);
-}
-
-static const struct i2c_device_id pcf8591_id[] = {
- { "pcf8591", 0 },
- { }
-};
-MODULE_DEVICE_TABLE(i2c, pcf8591_id);
-
-static struct i2c_driver pcf8591_driver = {
- .driver = {
- .name = "pcf8591",
- },
- .probe = pcf8591_probe,
- .remove = pcf8591_remove,
- .id_table = pcf8591_id,
-
- .class = I2C_CLASS_HWMON, /* Nearest choice */
- .detect = pcf8591_detect,
- .address_data = &addr_data,
-};
-
-static int __init pcf8591_init(void)
-{
- if (input_mode < 0 || input_mode > 3) {
- printk(KERN_WARNING "pcf8591: invalid input_mode (%d)\n",
- input_mode);
- input_mode = 0;
- }
- return i2c_add_driver(&pcf8591_driver);
-}
-
-static void __exit pcf8591_exit(void)
-{
- i2c_del_driver(&pcf8591_driver);
-}
-
-MODULE_AUTHOR("Aurelien Jarno <aurelien@aurel32.net>");
-MODULE_DESCRIPTION("PCF8591 driver");
-MODULE_LICENSE("GPL");
-
-module_init(pcf8591_init);
-module_exit(pcf8591_exit);
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index e7d984866de..b6f3a0de6ca 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -152,7 +152,7 @@ static void i2c_device_shutdown(struct device *dev)
driver->shutdown(to_i2c_client(dev));
}
-static int i2c_device_suspend(struct device * dev, pm_message_t mesg)
+static int i2c_device_suspend(struct device *dev, pm_message_t mesg)
{
struct i2c_driver *driver;
@@ -164,7 +164,7 @@ static int i2c_device_suspend(struct device * dev, pm_message_t mesg)
return driver->suspend(to_i2c_client(dev), mesg);
}
-static int i2c_device_resume(struct device * dev)
+static int i2c_device_resume(struct device *dev)
{
struct i2c_driver *driver;
@@ -187,13 +187,15 @@ static void i2c_client_dev_release(struct device *dev)
kfree(to_i2c_client(dev));
}
-static ssize_t show_client_name(struct device *dev, struct device_attribute *attr, char *buf)
+static ssize_t
+show_client_name(struct device *dev, struct device_attribute *attr, char *buf)
{
struct i2c_client *client = to_i2c_client(dev);
return sprintf(buf, "%s\n", client->name);
}
-static ssize_t show_modalias(struct device *dev, struct device_attribute *attr, char *buf)
+static ssize_t
+show_modalias(struct device *dev, struct device_attribute *attr, char *buf)
{
struct i2c_client *client = to_i2c_client(dev);
return sprintf(buf, "%s%s\n", I2C_MODULE_PREFIX, client->name);
@@ -365,8 +367,7 @@ static struct i2c_driver dummy_driver = {
* This returns the new i2c client, which should be saved for later use with
* i2c_unregister_device(); or NULL to indicate an error.
*/
-struct i2c_client *
-i2c_new_dummy(struct i2c_adapter *adapter, u16 address)
+struct i2c_client *i2c_new_dummy(struct i2c_adapter *adapter, u16 address)
{
struct i2c_board_info info = {
I2C_BOARD_INFO("dummy", address),
@@ -413,8 +414,8 @@ static void i2c_scan_static_board_info(struct i2c_adapter *adapter)
if (devinfo->busnum == adapter->nr
&& !i2c_new_device(adapter,
&devinfo->board_info))
- printk(KERN_ERR "i2c-core: can't create i2c%d-%04x\n",
- i2c_adapter_id(adapter),
+ dev_err(&adapter->dev,
+ "Can't create device at 0x%02x\n",
devinfo->board_info.addr);
}
mutex_unlock(&__i2c_board_lock);
@@ -459,6 +460,11 @@ static int i2c_register_adapter(struct i2c_adapter *adap)
pr_debug("I2C adapter driver [%s] forgot to specify "
"physical device\n", adap->name);
}
+
+ /* Set default timeout to 1 second if not already set */
+ if (adap->timeout == 0)
+ adap->timeout = HZ;
+
dev_set_name(&adap->dev, "i2c-%d", adap->nr);
adap->dev.release = &i2c_adapter_dev_release;
adap->dev.class = &i2c_adapter_class;
@@ -581,7 +587,8 @@ static int i2c_do_del_adapter(struct device_driver *d, void *data)
struct i2c_client *client, *_n;
int res;
- /* Remove the devices we created ourselves */
+ /* Remove the devices we created ourselves as the result of hardware
+ * probing (using a driver's detect method) */
list_for_each_entry_safe(client, _n, &driver->clients, detected) {
if (client->adapter == adapter) {
dev_dbg(&adapter->dev, "Removing %s at 0x%x\n",
@@ -749,6 +756,8 @@ static int __detach_adapter(struct device *dev, void *data)
struct i2c_driver *driver = data;
struct i2c_client *client, *_n;
+ /* Remove the devices we created ourselves as the result of hardware
+ * probing (using a driver's detect method) */
list_for_each_entry_safe(client, _n, &driver->clients, detected) {
dev_dbg(&adapter->dev, "Removing %s at 0x%x\n",
client->name, client->addr);
@@ -841,7 +850,7 @@ int i2c_attach_client(struct i2c_client *client)
if (client->driver && !is_newstyle_driver(client->driver)) {
client->dev.release = i2c_client_release;
- client->dev.uevent_suppress = 1;
+ dev_set_uevent_suppress(&client->dev, 1);
} else
client->dev.release = i2c_client_dev_release;
@@ -1012,7 +1021,7 @@ module_exit(i2c_exit);
* Note that there is no requirement that each message be sent to
* the same slave address, although that is the most common model.
*/
-int i2c_transfer(struct i2c_adapter * adap, struct i2c_msg *msgs, int num)
+int i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
{
int ret;
@@ -1519,8 +1528,7 @@ EXPORT_SYMBOL(i2c_put_adapter);
/* The SMBus parts */
#define POLY (0x1070U << 3)
-static u8
-crc8(u16 data)
+static u8 crc8(u16 data)
{
int i;
@@ -1984,9 +1992,9 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter * adapter, u16 addr,
* This executes an SMBus protocol operation, and returns a negative
* errno code else zero on success.
*/
-s32 i2c_smbus_xfer(struct i2c_adapter * adapter, u16 addr, unsigned short flags,
+s32 i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr, unsigned short flags,
char read_write, u8 command, int protocol,
- union i2c_smbus_data * data)
+ union i2c_smbus_data *data)
{
s32 res;