summaryrefslogtreecommitdiffstats
path: root/drivers/i2c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/i2c')
-rw-r--r--drivers/i2c/Kconfig14
-rw-r--r--drivers/i2c/algos/Kconfig11
-rw-r--r--drivers/i2c/busses/i2c-acorn.c2
-rw-r--r--drivers/i2c/busses/i2c-amd756-s4882.c9
-rw-r--r--drivers/i2c/busses/i2c-at91.c6
-rw-r--r--drivers/i2c/busses/i2c-bfin-twi.c35
-rw-r--r--drivers/i2c/busses/i2c-davinci.c5
-rw-r--r--drivers/i2c/busses/i2c-gpio.c9
-rw-r--r--drivers/i2c/busses/i2c-ixp2000.c4
-rw-r--r--drivers/i2c/busses/i2c-nforce2-s4985.c5
-rw-r--r--drivers/i2c/busses/i2c-pnx.c2
-rw-r--r--drivers/i2c/busses/i2c-pxa.c6
-rw-r--r--drivers/i2c/busses/i2c-s3c2410.c133
-rw-r--r--drivers/i2c/chips/Kconfig2
-rw-r--r--drivers/i2c/chips/at24.c8
-rw-r--r--drivers/i2c/chips/isp1301_omap.c4
-rw-r--r--drivers/i2c/chips/menelaus.c5
-rw-r--r--drivers/i2c/chips/tps65010.c2
-rw-r--r--drivers/i2c/i2c-core.c17
-rw-r--r--drivers/i2c/i2c-dev.c10
20 files changed, 216 insertions, 73 deletions
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index 96867347bcb..711ca08ab77 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -38,6 +38,20 @@ config I2C_CHARDEV
This support is also available as a module. If so, the module
will be called i2c-dev.
+config I2C_HELPER_AUTO
+ bool "Autoselect pertinent helper modules"
+ default y
+ help
+ Some I2C bus drivers require so-called "I2C algorithm" modules
+ to work. These are basically software-only abstractions of generic
+ I2C interfaces. This option will autoselect them so that you don't
+ have to care.
+
+ Unselect this only if you need to enable additional helper
+ modules, for example for use with external I2C bus drivers.
+
+ In doubt, say Y.
+
source drivers/i2c/algos/Kconfig
source drivers/i2c/busses/Kconfig
source drivers/i2c/chips/Kconfig
diff --git a/drivers/i2c/algos/Kconfig b/drivers/i2c/algos/Kconfig
index 7137a17402f..b788579b822 100644
--- a/drivers/i2c/algos/Kconfig
+++ b/drivers/i2c/algos/Kconfig
@@ -2,15 +2,20 @@
# I2C algorithm drivers configuration
#
+menu "I2C Algorithms"
+ depends on !I2C_HELPER_AUTO
+
config I2C_ALGOBIT
- tristate
+ tristate "I2C bit-banging interfaces"
config I2C_ALGOPCF
- tristate
+ tristate "I2C PCF 8584 interfaces"
config I2C_ALGOPCA
- tristate
+ tristate "I2C PCA 9564 interfaces"
config I2C_ALGO_SGI
tristate
depends on SGI_IP22 || SGI_IP32 || X86_VISWS
+
+endmenu
diff --git a/drivers/i2c/busses/i2c-acorn.c b/drivers/i2c/busses/i2c-acorn.c
index 7c2be3558a2..75089febbc1 100644
--- a/drivers/i2c/busses/i2c-acorn.c
+++ b/drivers/i2c/busses/i2c-acorn.c
@@ -16,7 +16,7 @@
#include <linux/i2c.h>
#include <linux/i2c-algo-bit.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/hardware/ioc.h>
#include <asm/system.h>
diff --git a/drivers/i2c/busses/i2c-amd756-s4882.c b/drivers/i2c/busses/i2c-amd756-s4882.c
index 72872d1e63e..8ba2bcf727d 100644
--- a/drivers/i2c/busses/i2c-amd756-s4882.c
+++ b/drivers/i2c/busses/i2c-amd756-s4882.c
@@ -155,6 +155,9 @@ static int __init amd756_s4882_init(void)
int i, error;
union i2c_smbus_data ioconfig;
+ if (!amd756_smbus.dev.parent)
+ return -ENODEV;
+
/* Configure the PCA9556 multiplexer */
ioconfig.byte = 0x00; /* All I/O to output mode */
error = i2c_smbus_xfer(&amd756_smbus, 0x18, 0, I2C_SMBUS_WRITE, 0x03,
@@ -168,11 +171,7 @@ static int __init amd756_s4882_init(void)
/* Unregister physical bus */
error = i2c_del_adapter(&amd756_smbus);
if (error) {
- if (error == -EINVAL)
- error = -ENODEV;
- else
- dev_err(&amd756_smbus.dev, "Physical bus removal "
- "failed\n");
+ dev_err(&amd756_smbus.dev, "Physical bus removal failed\n");
goto ERROR0;
}
diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c
index 73d61946a53..c1adcdbf797 100644
--- a/drivers/i2c/busses/i2c-at91.c
+++ b/drivers/i2c/busses/i2c-at91.c
@@ -27,9 +27,9 @@
#include <asm/io.h>
-#include <asm/arch/at91_twi.h>
-#include <asm/arch/board.h>
-#include <asm/arch/cpu.h>
+#include <mach/at91_twi.h>
+#include <mach/board.h>
+#include <mach/cpu.h>
#define TWI_CLOCK 100000 /* Hz. max 400 Kbits/sec */
diff --git a/drivers/i2c/busses/i2c-bfin-twi.c b/drivers/i2c/busses/i2c-bfin-twi.c
index 48d084bdf7c..3c855ff2992 100644
--- a/drivers/i2c/busses/i2c-bfin-twi.c
+++ b/drivers/i2c/busses/i2c-bfin-twi.c
@@ -49,6 +49,8 @@ struct bfin_twi_iface {
struct i2c_msg *pmsg;
int msg_num;
int cur_msg;
+ u16 saved_clkdiv;
+ u16 saved_control;
void __iomem *regs_base;
};
@@ -565,32 +567,43 @@ static u32 bfin_twi_functionality(struct i2c_adapter *adap)
I2C_FUNC_I2C;
}
-
static struct i2c_algorithm bfin_twi_algorithm = {
.master_xfer = bfin_twi_master_xfer,
.smbus_xfer = bfin_twi_smbus_xfer,
.functionality = bfin_twi_functionality,
};
-
-static int i2c_bfin_twi_suspend(struct platform_device *dev, pm_message_t state)
+static int i2c_bfin_twi_suspend(struct platform_device *pdev, pm_message_t state)
{
- struct bfin_twi_iface *iface = platform_get_drvdata(dev);
+ struct bfin_twi_iface *iface = platform_get_drvdata(pdev);
+
+ iface->saved_clkdiv = read_CLKDIV(iface);
+ iface->saved_control = read_CONTROL(iface);
+
+ free_irq(iface->irq, iface);
/* Disable TWI */
- write_CONTROL(iface, read_CONTROL(iface) & ~TWI_ENA);
- SSYNC();
+ write_CONTROL(iface, iface->saved_control & ~TWI_ENA);
return 0;
}
-static int i2c_bfin_twi_resume(struct platform_device *dev)
+static int i2c_bfin_twi_resume(struct platform_device *pdev)
{
- struct bfin_twi_iface *iface = platform_get_drvdata(dev);
+ struct bfin_twi_iface *iface = platform_get_drvdata(pdev);
- /* Enable TWI */
- write_CONTROL(iface, read_CONTROL(iface) | TWI_ENA);
- SSYNC();
+ int rc = request_irq(iface->irq, bfin_twi_interrupt_entry,
+ IRQF_DISABLED, pdev->name, iface);
+ if (rc) {
+ dev_err(&pdev->dev, "Can't get IRQ %d !\n", iface->irq);
+ return -ENODEV;
+ }
+
+ /* Resume TWI interface clock as specified */
+ write_CLKDIV(iface, iface->saved_clkdiv);
+
+ /* Resume TWI */
+ write_CONTROL(iface, iface->saved_control);
return 0;
}
diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c
index af3846eda98..5d7789834b9 100644
--- a/drivers/i2c/busses/i2c-davinci.c
+++ b/drivers/i2c/busses/i2c-davinci.c
@@ -36,10 +36,9 @@
#include <linux/platform_device.h>
#include <linux/io.h>
-#include <asm/hardware.h>
-#include <asm/mach-types.h>
+#include <mach/hardware.h>
-#include <asm/arch/i2c.h>
+#include <mach/i2c.h>
/* ----- global defines ----------------------------------------------- */
diff --git a/drivers/i2c/busses/i2c-gpio.c b/drivers/i2c/busses/i2c-gpio.c
index 79b455a1f09..32104eac8d3 100644
--- a/drivers/i2c/busses/i2c-gpio.c
+++ b/drivers/i2c/busses/i2c-gpio.c
@@ -77,7 +77,7 @@ static int i2c_gpio_getscl(void *data)
return gpio_get_value(pdata->scl_pin);
}
-static int __init i2c_gpio_probe(struct platform_device *pdev)
+static int __devinit i2c_gpio_probe(struct platform_device *pdev)
{
struct i2c_gpio_platform_data *pdata;
struct i2c_algo_bit_data *bit_data;
@@ -174,7 +174,7 @@ err_alloc_adap:
return ret;
}
-static int __exit i2c_gpio_remove(struct platform_device *pdev)
+static int __devexit i2c_gpio_remove(struct platform_device *pdev)
{
struct i2c_gpio_platform_data *pdata;
struct i2c_adapter *adap;
@@ -196,14 +196,15 @@ static struct platform_driver i2c_gpio_driver = {
.name = "i2c-gpio",
.owner = THIS_MODULE,
},
- .remove = __exit_p(i2c_gpio_remove),
+ .probe = i2c_gpio_probe,
+ .remove = __devexit_p(i2c_gpio_remove),
};
static int __init i2c_gpio_init(void)
{
int ret;
- ret = platform_driver_probe(&i2c_gpio_driver, i2c_gpio_probe);
+ ret = platform_driver_register(&i2c_gpio_driver);
if (ret)
printk(KERN_ERR "i2c-gpio: probe failed: %d\n", ret);
diff --git a/drivers/i2c/busses/i2c-ixp2000.c b/drivers/i2c/busses/i2c-ixp2000.c
index 5af9e6521e6..05d72e98135 100644
--- a/drivers/i2c/busses/i2c-ixp2000.c
+++ b/drivers/i2c/busses/i2c-ixp2000.c
@@ -33,8 +33,8 @@
#include <linux/i2c.h>
#include <linux/i2c-algo-bit.h>
-#include <asm/hardware.h> /* Pick up IXP2000-specific bits */
-#include <asm/arch/gpio.h>
+#include <mach/hardware.h> /* Pick up IXP2000-specific bits */
+#include <mach/gpio.h>
static inline int ixp2000_scl_pin(void *data)
{
diff --git a/drivers/i2c/busses/i2c-nforce2-s4985.c b/drivers/i2c/busses/i2c-nforce2-s4985.c
index d1a4cbcf2aa..29015eb9ca4 100644
--- a/drivers/i2c/busses/i2c-nforce2-s4985.c
+++ b/drivers/i2c/busses/i2c-nforce2-s4985.c
@@ -150,6 +150,9 @@ static int __init nforce2_s4985_init(void)
int i, error;
union i2c_smbus_data ioconfig;
+ if (!nforce2_smbus)
+ return -ENODEV;
+
/* Configure the PCA9556 multiplexer */
ioconfig.byte = 0x00; /* All I/O to output mode */
error = i2c_smbus_xfer(nforce2_smbus, 0x18, 0, I2C_SMBUS_WRITE, 0x03,
@@ -161,8 +164,6 @@ static int __init nforce2_s4985_init(void)
}
/* Unregister physical bus */
- if (!nforce2_smbus)
- return -ENODEV;
error = i2c_del_adapter(nforce2_smbus);
if (error) {
dev_err(&nforce2_smbus->dev, "Physical bus removal failed\n");
diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c
index 1ca21084ffc..ec15cff556b 100644
--- a/drivers/i2c/busses/i2c-pnx.c
+++ b/drivers/i2c/busses/i2c-pnx.c
@@ -19,7 +19,7 @@
#include <linux/completion.h>
#include <linux/platform_device.h>
#include <linux/i2c-pnx.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/uaccess.h>
diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index af9e6034d7f..44d838410f1 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -34,11 +34,11 @@
#include <linux/err.h>
#include <linux/clk.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/io.h>
-#include <asm/arch/i2c.h>
-#include <asm/arch/pxa-regs.h>
+#include <mach/i2c.h>
+#include <mach/pxa-regs.h>
struct pxa_i2c {
spinlock_t lock;
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 007390ad981..c772e02c280 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -33,12 +33,13 @@
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
+#include <linux/cpufreq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/io.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
#include <asm/plat-s3c/regs-iic.h>
#include <asm/plat-s3c/iic.h>
@@ -64,6 +65,7 @@ struct s3c24xx_i2c {
unsigned int tx_setup;
enum s3c24xx_i2c_state state;
+ unsigned long clkrate;
void __iomem *regs;
struct clk *clk;
@@ -71,6 +73,10 @@ struct s3c24xx_i2c {
struct resource *irq;
struct resource *ioarea;
struct i2c_adapter adap;
+
+#ifdef CONFIG_CPU_FREQ
+ struct notifier_block freq_transition;
+#endif
};
/* default platform data to use if not supplied in the platform_device
@@ -501,6 +507,9 @@ static int s3c24xx_i2c_doxfer(struct s3c24xx_i2c *i2c, struct i2c_msg *msgs, int
unsigned long timeout;
int ret;
+ if (!readl(i2c->regs + S3C2410_IICCON) & S3C2410_IICCON_IRQEN)
+ return -EIO;
+
ret = s3c24xx_i2c_set_master(i2c);
if (ret != 0) {
dev_err(i2c->dev, "cannot get bus (error %d)\n", ret);
@@ -636,27 +645,28 @@ static inline int freq_acceptable(unsigned int freq, unsigned int wanted)
return (diff >= -2 && diff <= 2);
}
-/* s3c24xx_i2c_getdivisor
+/* s3c24xx_i2c_clockrate
*
* work out a divisor for the user requested frequency setting,
* either by the requested frequency, or scanning the acceptable
* range of frequencies until something is found
*/
-static int s3c24xx_i2c_getdivisor(struct s3c24xx_i2c *i2c,
- struct s3c2410_platform_i2c *pdata,
- unsigned long *iicon,
- unsigned int *got)
+static int s3c24xx_i2c_clockrate(struct s3c24xx_i2c *i2c, unsigned int *got)
{
+ struct s3c2410_platform_i2c *pdata;
unsigned long clkin = clk_get_rate(i2c->clk);
-
unsigned int divs, div1;
+ u32 iiccon;
int freq;
int start, end;
+ i2c->clkrate = clkin;
+
+ pdata = s3c24xx_i2c_get_platformdata(i2c->adap.dev.parent);
clkin /= 1000; /* clkin now in KHz */
- dev_dbg(i2c->dev, "pdata %p, freq %lu %lu..%lu\n",
+ dev_dbg(i2c->dev, "pdata %p, freq %lu %lu..%lu\n",
pdata, pdata->bus_freq, pdata->min_freq, pdata->max_freq);
if (pdata->bus_freq != 0) {
@@ -688,11 +698,79 @@ static int s3c24xx_i2c_getdivisor(struct s3c24xx_i2c *i2c,
found:
*got = freq;
- *iicon |= (divs-1);
- *iicon |= (div1 == 512) ? S3C2410_IICCON_TXDIV_512 : 0;
+
+ iiccon = readl(i2c->regs + S3C2410_IICCON);
+ iiccon &= ~(S3C2410_IICCON_SCALEMASK | S3C2410_IICCON_TXDIV_512);
+ iiccon |= (divs-1);
+
+ if (div1 == 512)
+ iiccon |= S3C2410_IICCON_TXDIV_512;
+
+ writel(iiccon, i2c->regs + S3C2410_IICCON);
+
+ return 0;
+}
+
+#ifdef CONFIG_CPU_FREQ
+
+#define freq_to_i2c(_n) container_of(_n, struct s3c24xx_i2c, freq_transition)
+
+static int s3c24xx_i2c_cpufreq_transition(struct notifier_block *nb,
+ unsigned long val, void *data)
+{
+ struct s3c24xx_i2c *i2c = freq_to_i2c(nb);
+ unsigned long flags;
+ unsigned int got;
+ int delta_f;
+ int ret;
+
+ delta_f = clk_get_rate(i2c->clk) - i2c->clkrate;
+
+ /* if we're post-change and the input clock has slowed down
+ * or at pre-change and the clock is about to speed up, then
+ * adjust our clock rate. <0 is slow, >0 speedup.
+ */
+
+ if ((val == CPUFREQ_POSTCHANGE && delta_f < 0) ||
+ (val == CPUFREQ_PRECHANGE && delta_f > 0)) {
+ spin_lock_irqsave(&i2c->lock, flags);
+ ret = s3c24xx_i2c_clockrate(i2c, &got);
+ spin_unlock_irqrestore(&i2c->lock, flags);
+
+ if (ret < 0)
+ dev_err(i2c->dev, "cannot find frequency\n");
+ else
+ dev_info(i2c->dev, "setting freq %d\n", got);
+ }
+
+ return 0;
+}
+
+static inline int s3c24xx_i2c_register_cpufreq(struct s3c24xx_i2c *i2c)
+{
+ i2c->freq_transition.notifier_call = s3c24xx_i2c_cpufreq_transition;
+
+ return cpufreq_register_notifier(&i2c->freq_transition,
+ CPUFREQ_TRANSITION_NOTIFIER);
+}
+
+static inline void s3c24xx_i2c_deregister_cpufreq(struct s3c24xx_i2c *i2c)
+{
+ cpufreq_unregister_notifier(&i2c->freq_transition,
+ CPUFREQ_TRANSITION_NOTIFIER);
+}
+
+#else
+static inline int s3c24xx_i2c_register_cpufreq(struct s3c24xx_i2c *i2c)
+{
return 0;
}
+static inline void s3c24xx_i2c_deregister_cpufreq(struct s3c24xx_i2c *i2c)
+{
+}
+#endif
+
/* s3c24xx_i2c_init
*
* initialise the controller, set the IO lines and frequency
@@ -719,9 +797,12 @@ static int s3c24xx_i2c_init(struct s3c24xx_i2c *i2c)
dev_info(i2c->dev, "slave address 0x%02x\n", pdata->slave_addr);
+ writel(iicon, i2c->regs + S3C2410_IICCON);
+
/* we need to work out the divisors for the clock... */
- if (s3c24xx_i2c_getdivisor(i2c, pdata, &iicon, &freq) != 0) {
+ if (s3c24xx_i2c_clockrate(i2c, &freq) != 0) {
+ writel(0, i2c->regs + S3C2410_IICCON);
dev_err(i2c->dev, "cannot meet bus frequency required\n");
return -EINVAL;
}
@@ -730,8 +811,6 @@ static int s3c24xx_i2c_init(struct s3c24xx_i2c *i2c)
dev_info(i2c->dev, "bus frequency set to %d KHz\n", freq);
dev_dbg(i2c->dev, "S3C2410_IICCON=0x%02lx\n", iicon);
-
- writel(iicon, i2c->regs + S3C2410_IICCON);
/* check for s3c2440 i2c controller */
@@ -752,9 +831,12 @@ static int s3c24xx_i2c_init(struct s3c24xx_i2c *i2c)
static int s3c24xx_i2c_probe(struct platform_device *pdev)
{
struct s3c24xx_i2c *i2c = &s3c24xx_i2c;
+ struct s3c2410_platform_i2c *pdata;
struct resource *res;
int ret;
+ pdata = s3c24xx_i2c_get_platformdata(&pdev->dev);
+
/* find the clock and enable it */
i2c->dev = &pdev->dev;
@@ -832,17 +914,34 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
dev_dbg(&pdev->dev, "irq resource %p (%lu)\n", res,
(unsigned long)res->start);
- ret = i2c_add_adapter(&i2c->adap);
+ ret = s3c24xx_i2c_register_cpufreq(i2c);
if (ret < 0) {
- dev_err(&pdev->dev, "failed to add bus to i2c core\n");
+ dev_err(&pdev->dev, "failed to register cpufreq notifier\n");
goto err_irq;
}
+ /* Note, previous versions of the driver used i2c_add_adapter()
+ * to add the bus at any number. We now pass the bus number via
+ * the platform data, so if unset it will now default to always
+ * being bus 0.
+ */
+
+ i2c->adap.nr = pdata->bus_num;
+
+ ret = i2c_add_numbered_adapter(&i2c->adap);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to add bus to i2c core\n");
+ goto err_cpufreq;
+ }
+
platform_set_drvdata(pdev, i2c);
dev_info(&pdev->dev, "%s: S3C I2C adapter\n", i2c->adap.dev.bus_id);
return 0;
+ err_cpufreq:
+ s3c24xx_i2c_deregister_cpufreq(i2c);
+
err_irq:
free_irq(i2c->irq->start, i2c);
@@ -870,6 +969,8 @@ static int s3c24xx_i2c_remove(struct platform_device *pdev)
{
struct s3c24xx_i2c *i2c = platform_get_drvdata(pdev);
+ s3c24xx_i2c_deregister_cpufreq(i2c);
+
i2c_del_adapter(&i2c->adap);
free_irq(i2c->irq->start, i2c);
diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
index 50e0a465374..a95cb9465d6 100644
--- a/drivers/i2c/chips/Kconfig
+++ b/drivers/i2c/chips/Kconfig
@@ -126,7 +126,7 @@ config ISP1301_OMAP
config TPS65010
tristate "TPS6501x Power Management chips"
- depends on HAVE_GPIO_LIB
+ depends on GPIOLIB
default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK
help
If you say yes here you get support for the TPS6501x series of
diff --git a/drivers/i2c/chips/at24.c b/drivers/i2c/chips/at24.c
index e764c94f3e3..2a4acb26956 100644
--- a/drivers/i2c/chips/at24.c
+++ b/drivers/i2c/chips/at24.c
@@ -188,7 +188,7 @@ static ssize_t at24_eeprom_read(struct at24_data *at24, char *buf,
count = I2C_SMBUS_BLOCK_MAX;
status = i2c_smbus_read_i2c_block_data(client, offset,
count, buf);
- dev_dbg(&client->dev, "smbus read %zd@%d --> %d\n",
+ dev_dbg(&client->dev, "smbus read %zu@%d --> %d\n",
count, offset, status);
return (status < 0) ? -EIO : status;
}
@@ -214,7 +214,7 @@ static ssize_t at24_eeprom_read(struct at24_data *at24, char *buf,
msg[1].len = count;
status = i2c_transfer(client->adapter, msg, 2);
- dev_dbg(&client->dev, "i2c read %zd@%d --> %d\n",
+ dev_dbg(&client->dev, "i2c read %zu@%d --> %d\n",
count, offset, status);
if (status == 2)
@@ -334,7 +334,7 @@ static ssize_t at24_eeprom_write(struct at24_data *at24, char *buf,
if (status == 1)
status = count;
}
- dev_dbg(&client->dev, "write %zd@%d --> %zd (%ld)\n",
+ dev_dbg(&client->dev, "write %zu@%d --> %zd (%ld)\n",
count, offset, status, jiffies);
if (status == count)
@@ -512,7 +512,7 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id)
i2c_set_clientdata(client, at24);
- dev_info(&client->dev, "%Zd byte %s EEPROM %s\n",
+ dev_info(&client->dev, "%zu byte %s EEPROM %s\n",
at24->bin.size, client->name,
writable ? "(writable)" : "(read-only)");
dev_dbg(&client->dev,
diff --git a/drivers/i2c/chips/isp1301_omap.c b/drivers/i2c/chips/isp1301_omap.c
index 03a33f1b9cd..18355ae2155 100644
--- a/drivers/i2c/chips/isp1301_omap.c
+++ b/drivers/i2c/chips/isp1301_omap.c
@@ -33,7 +33,7 @@
#include <linux/workqueue.h>
#include <asm/irq.h>
-#include <asm/arch/usb.h>
+#include <mach/usb.h>
#ifndef DEBUG
@@ -94,7 +94,7 @@ struct isp1301 {
/* board-specific PM hooks */
#include <asm/gpio.h>
-#include <asm/arch/mux.h>
+#include <mach/mux.h>
#include <asm/mach-types.h>
diff --git a/drivers/i2c/chips/menelaus.c b/drivers/i2c/chips/menelaus.c
index b36db1797c1..176126d3a01 100644
--- a/drivers/i2c/chips/menelaus.c
+++ b/drivers/i2c/chips/menelaus.c
@@ -41,11 +41,10 @@
#include <linux/rtc.h>
#include <linux/bcd.h>
-#include <asm/mach-types.h>
#include <asm/mach/irq.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/menelaus.h>
+#include <mach/gpio.h>
+#include <mach/menelaus.h>
#define DRIVER_NAME "menelaus"
diff --git a/drivers/i2c/chips/tps65010.c b/drivers/i2c/chips/tps65010.c
index 85949685191..cf02e8fceb4 100644
--- a/drivers/i2c/chips/tps65010.c
+++ b/drivers/i2c/chips/tps65010.c
@@ -636,6 +636,8 @@ static int tps65010_probe(struct i2c_client *client,
tps->outmask = board->outmask;
tps->chip.label = client->name;
+ tps->chip.dev = &client->dev;
+ tps->chip.owner = THIS_MODULE;
tps->chip.set = tps65010_gpio_set;
tps->chip.direction_output = tps65010_output;
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 7608df83d6d..550853f79ae 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -722,7 +722,8 @@ int i2c_register_driver(struct module *owner, struct i2c_driver *driver)
INIT_LIST_HEAD(&driver->clients);
/* Walk the adapters that are already present */
- class_for_each_device(&i2c_adapter_class, driver, __attach_adapter);
+ class_for_each_device(&i2c_adapter_class, NULL, driver,
+ __attach_adapter);
mutex_unlock(&core_lock);
return 0;
@@ -782,7 +783,8 @@ void i2c_del_driver(struct i2c_driver *driver)
{
mutex_lock(&core_lock);
- class_for_each_device(&i2c_adapter_class, driver, __detach_adapter);
+ class_for_each_device(&i2c_adapter_class, NULL, driver,
+ __detach_adapter);
driver_unregister(&driver->driver);
pr_debug("i2c-core: driver [%s] unregistered\n", driver->driver.name);
@@ -811,7 +813,12 @@ static int i2c_check_addr(struct i2c_adapter *adapter, int addr)
int i2c_attach_client(struct i2c_client *client)
{
struct i2c_adapter *adapter = client->adapter;
- int res = 0;
+ int res;
+
+ /* Check for address business */
+ res = i2c_check_addr(adapter, client->addr);
+ if (res)
+ return res;
client->dev.parent = &client->adapter->dev;
client->dev.bus = &i2c_bus_type;
@@ -1449,9 +1456,11 @@ i2c_new_probed_device(struct i2c_adapter *adap,
if ((addr_list[i] & ~0x07) == 0x30
|| (addr_list[i] & ~0x0f) == 0x50
|| !i2c_check_functionality(adap, I2C_FUNC_SMBUS_QUICK)) {
+ union i2c_smbus_data data;
+
if (i2c_smbus_xfer(adap, addr_list[i], 0,
I2C_SMBUS_READ, 0,
- I2C_SMBUS_BYTE, NULL) >= 0)
+ I2C_SMBUS_BYTE, &data) >= 0)
break;
} else {
if (i2c_smbus_xfer(adap, addr_list[i], 0,
diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c
index 86727fa8858..af4491fa7e3 100644
--- a/drivers/i2c/i2c-dev.c
+++ b/drivers/i2c/i2c-dev.c
@@ -147,7 +147,7 @@ static ssize_t i2cdev_read (struct file *file, char __user *buf, size_t count,
if (tmp==NULL)
return -ENOMEM;
- pr_debug("i2c-dev: i2c-%d reading %zd bytes.\n",
+ pr_debug("i2c-dev: i2c-%d reading %zu bytes.\n",
iminor(file->f_path.dentry->d_inode), count);
ret = i2c_master_recv(client,tmp,count);
@@ -175,7 +175,7 @@ static ssize_t i2cdev_write (struct file *file, const char __user *buf, size_t c
return -EFAULT;
}
- pr_debug("i2c-dev: i2c-%d writing %zd bytes.\n",
+ pr_debug("i2c-dev: i2c-%d writing %zu bytes.\n",
iminor(file->f_path.dentry->d_inode), count);
ret = i2c_master_send(client,tmp,count);
@@ -521,9 +521,9 @@ static int i2cdev_attach_adapter(struct i2c_adapter *adap)
return PTR_ERR(i2c_dev);
/* register this i2c device with the driver core */
- i2c_dev->dev = device_create(i2c_dev_class, &adap->dev,
- MKDEV(I2C_MAJOR, adap->nr),
- "i2c-%d", adap->nr);
+ i2c_dev->dev = device_create_drvdata(i2c_dev_class, &adap->dev,
+ MKDEV(I2C_MAJOR, adap->nr),
+ NULL, "i2c-%d", adap->nr);
if (IS_ERR(i2c_dev->dev)) {
res = PTR_ERR(i2c_dev->dev);
goto error;
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-03-28 17:55:23 +0000