summaryrefslogtreecommitdiffstats
path: root/drivers/i2c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/i2c')
-rw-r--r--drivers/i2c/Kconfig4
-rw-r--r--drivers/i2c/busses/Kconfig22
-rw-r--r--drivers/i2c/busses/Makefile2
-rw-r--r--drivers/i2c/busses/i2c-bcm-iproc.c461
-rw-r--r--drivers/i2c/busses/i2c-cadence.c189
-rw-r--r--drivers/i2c/busses/i2c-designware-baytrail.c160
-rw-r--r--drivers/i2c/busses/i2c-designware-core.c83
-rw-r--r--drivers/i2c/busses/i2c-designware-core.h12
-rw-r--r--drivers/i2c/busses/i2c-designware-pcidrv.c41
-rw-r--r--drivers/i2c/busses/i2c-designware-platdrv.c20
-rw-r--r--drivers/i2c/busses/i2c-imx.c33
-rw-r--r--drivers/i2c/busses/i2c-ocores.c91
-rw-r--r--drivers/i2c/busses/i2c-pmcmsp.c7
-rw-r--r--drivers/i2c/busses/i2c-rk3x.c99
-rw-r--r--drivers/i2c/busses/i2c-tegra.c2
-rw-r--r--drivers/i2c/i2c-core.c162
-rw-r--r--drivers/i2c/muxes/i2c-mux-pca954x.c11
17 files changed, 1045 insertions, 354 deletions
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index 8c9e619f302..78fbee46362 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -35,11 +35,11 @@ config ACPI_I2C_OPREGION
if I2C
config I2C_BOARDINFO
- boolean
+ bool
default y
config I2C_COMPAT
- boolean "Enable compatibility bits for old user-space"
+ bool "Enable compatibility bits for old user-space"
default y
help
Say Y here if you intend to run lm-sensors 3.1.1 or older, or any
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index ab838d9e28b..22da9c2ffa2 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -79,7 +79,7 @@ config I2C_AMD8111
config I2C_HIX5HD2
tristate "Hix5hd2 high-speed I2C driver"
- depends on ARCH_HIX5HD2
+ depends on ARCH_HIX5HD2 || COMPILE_TEST
help
Say Y here to include support for high-speed I2C controller in the
Hisilicon based hix5hd2 SoCs.
@@ -372,6 +372,16 @@ config I2C_BCM2835
This support is also available as a module. If so, the module
will be called i2c-bcm2835.
+config I2C_BCM_IPROC
+ tristate "Broadcom iProc I2C controller"
+ depends on ARCH_BCM_IPROC || COMPILE_TEST
+ default ARCH_BCM_IPROC
+ help
+ If you say yes to this option, support will be included for the
+ Broadcom iProc I2C controller.
+
+ If you don't know what to do here, say N.
+
config I2C_BCM_KONA
tristate "BCM Kona I2C adapter"
depends on ARCH_BCM_MOBILE
@@ -465,6 +475,16 @@ config I2C_DESIGNWARE_PCI
This driver can also be built as a module. If so, the module
will be called i2c-designware-pci.
+config I2C_DESIGNWARE_BAYTRAIL
+ bool "Intel Baytrail I2C semaphore support"
+ depends on I2C_DESIGNWARE_PLATFORM && IOSF_MBI=y && ACPI
+ help
+ This driver enables managed host access to the PMIC I2C bus on select
+ Intel BayTrail platforms using the X-Powers AXP288 PMIC. It allows
+ the host to request uninterrupted access to the PMIC's I2C bus from
+ the platform firmware controlling it. You should say Y if running on
+ a BayTrail system using the AXP288.
+
config I2C_EFM32
tristate "EFM32 I2C controller"
depends on ARCH_EFM32 || COMPILE_TEST
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 56388f658d2..3638feb6677 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -33,6 +33,7 @@ obj-$(CONFIG_I2C_AT91) += i2c-at91.o
obj-$(CONFIG_I2C_AU1550) += i2c-au1550.o
obj-$(CONFIG_I2C_AXXIA) += i2c-axxia.o
obj-$(CONFIG_I2C_BCM2835) += i2c-bcm2835.o
+obj-$(CONFIG_I2C_BCM_IPROC) += i2c-bcm-iproc.o
obj-$(CONFIG_I2C_BLACKFIN_TWI) += i2c-bfin-twi.o
obj-$(CONFIG_I2C_CADENCE) += i2c-cadence.o
obj-$(CONFIG_I2C_CBUS_GPIO) += i2c-cbus-gpio.o
@@ -41,6 +42,7 @@ obj-$(CONFIG_I2C_DAVINCI) += i2c-davinci.o
obj-$(CONFIG_I2C_DESIGNWARE_CORE) += i2c-designware-core.o
obj-$(CONFIG_I2C_DESIGNWARE_PLATFORM) += i2c-designware-platform.o
i2c-designware-platform-objs := i2c-designware-platdrv.o
+i2c-designware-platform-$(CONFIG_I2C_DESIGNWARE_BAYTRAIL) += i2c-designware-baytrail.o
obj-$(CONFIG_I2C_DESIGNWARE_PCI) += i2c-designware-pci.o
i2c-designware-pci-objs := i2c-designware-pcidrv.o
obj-$(CONFIG_I2C_EFM32) += i2c-efm32.o
diff --git a/drivers/i2c/busses/i2c-bcm-iproc.c b/drivers/i2c/busses/i2c-bcm-iproc.c
new file mode 100644
index 00000000000..d3c89157b33
--- /dev/null
+++ b/drivers/i2c/busses/i2c-bcm-iproc.c
@@ -0,0 +1,461 @@
+/*
+ * Copyright (C) 2014 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#define CFG_OFFSET 0x00
+#define CFG_RESET_SHIFT 31
+#define CFG_EN_SHIFT 30
+#define CFG_M_RETRY_CNT_SHIFT 16
+#define CFG_M_RETRY_CNT_MASK 0x0f
+
+#define TIM_CFG_OFFSET 0x04
+#define TIM_CFG_MODE_400_SHIFT 31
+
+#define M_FIFO_CTRL_OFFSET 0x0c
+#define M_FIFO_RX_FLUSH_SHIFT 31
+#define M_FIFO_TX_FLUSH_SHIFT 30
+#define M_FIFO_RX_CNT_SHIFT 16
+#define M_FIFO_RX_CNT_MASK 0x7f
+#define M_FIFO_RX_THLD_SHIFT 8
+#define M_FIFO_RX_THLD_MASK 0x3f
+
+#define M_CMD_OFFSET 0x30
+#define M_CMD_START_BUSY_SHIFT 31
+#define M_CMD_STATUS_SHIFT 25
+#define M_CMD_STATUS_MASK 0x07
+#define M_CMD_STATUS_SUCCESS 0x0
+#define M_CMD_STATUS_LOST_ARB 0x1
+#define M_CMD_STATUS_NACK_ADDR 0x2
+#define M_CMD_STATUS_NACK_DATA 0x3
+#define M_CMD_STATUS_TIMEOUT 0x4
+#define M_CMD_PROTOCOL_SHIFT 9
+#define M_CMD_PROTOCOL_MASK 0xf
+#define M_CMD_PROTOCOL_BLK_WR 0x7
+#define M_CMD_PROTOCOL_BLK_RD 0x8
+#define M_CMD_PEC_SHIFT 8
+#define M_CMD_RD_CNT_SHIFT 0
+#define M_CMD_RD_CNT_MASK 0xff
+
+#define IE_OFFSET 0x38
+#define IE_M_RX_FIFO_FULL_SHIFT 31
+#define IE_M_RX_THLD_SHIFT 30
+#define IE_M_START_BUSY_SHIFT 28
+
+#define IS_OFFSET 0x3c
+#define IS_M_RX_FIFO_FULL_SHIFT 31
+#define IS_M_RX_THLD_SHIFT 30
+#define IS_M_START_BUSY_SHIFT 28
+
+#define M_TX_OFFSET 0x40
+#define M_TX_WR_STATUS_SHIFT 31
+#define M_TX_DATA_SHIFT 0
+#define M_TX_DATA_MASK 0xff
+
+#define M_RX_OFFSET 0x44
+#define M_RX_STATUS_SHIFT 30
+#define M_RX_STATUS_MASK 0x03
+#define M_RX_PEC_ERR_SHIFT 29
+#define M_RX_DATA_SHIFT 0
+#define M_RX_DATA_MASK 0xff
+
+#define I2C_TIMEOUT_MESC 100
+#define M_TX_RX_FIFO_SIZE 64
+
+enum bus_speed_index {
+ I2C_SPD_100K = 0,
+ I2C_SPD_400K,
+};
+
+struct bcm_iproc_i2c_dev {
+ struct device *device;
+ int irq;
+
+ void __iomem *base;
+
+ struct i2c_adapter adapter;
+
+ struct completion done;
+ int xfer_is_done;
+};
+
+/*
+ * Can be expanded in the future if more interrupt status bits are utilized
+ */
+#define ISR_MASK (1 << IS_M_START_BUSY_SHIFT)
+
+static irqreturn_t bcm_iproc_i2c_isr(int irq, void *data)
+{
+ struct bcm_iproc_i2c_dev *iproc_i2c = data;
+ u32 status = readl(iproc_i2c->base + IS_OFFSET);
+
+ status &= ISR_MASK;
+
+ if (!status)
+ return IRQ_NONE;
+
+ writel(status, iproc_i2c->base + IS_OFFSET);
+ iproc_i2c->xfer_is_done = 1;
+ complete_all(&iproc_i2c->done);
+
+ return IRQ_HANDLED;
+}
+
+static int bcm_iproc_i2c_check_status(struct bcm_iproc_i2c_dev *iproc_i2c,
+ struct i2c_msg *msg)
+{
+ u32 val;
+
+ val = readl(iproc_i2c->base + M_CMD_OFFSET);
+ val = (val >> M_CMD_STATUS_SHIFT) & M_CMD_STATUS_MASK;
+
+ switch (val) {
+ case M_CMD_STATUS_SUCCESS:
+ return 0;
+
+ case M_CMD_STATUS_LOST_ARB:
+ dev_dbg(iproc_i2c->device, "lost bus arbitration\n");
+ return -EAGAIN;
+
+ case M_CMD_STATUS_NACK_ADDR:
+ dev_dbg(iproc_i2c->device, "NAK addr:0x%02x\n", msg->addr);
+ return -ENXIO;
+
+ case M_CMD_STATUS_NACK_DATA:
+ dev_dbg(iproc_i2c->device, "NAK data\n");
+ return -ENXIO;
+
+ case M_CMD_STATUS_TIMEOUT:
+ dev_dbg(iproc_i2c->device, "bus timeout\n");
+ return -ETIMEDOUT;
+
+ default:
+ dev_dbg(iproc_i2c->device, "unknown error code=%d\n", val);
+ return -EIO;
+ }
+}
+
+static int bcm_iproc_i2c_xfer_single_msg(struct bcm_iproc_i2c_dev *iproc_i2c,
+ struct i2c_msg *msg)
+{
+ int ret, i;
+ u8 addr;
+ u32 val;
+ unsigned long time_left = msecs_to_jiffies(I2C_TIMEOUT_MESC);
+
+ /* need to reserve one byte in the FIFO for the slave address */
+ if (msg->len > M_TX_RX_FIFO_SIZE - 1) {
+ dev_err(iproc_i2c->device,
+ "only support data length up to %u bytes\n",
+ M_TX_RX_FIFO_SIZE - 1);
+ return -EOPNOTSUPP;
+ }
+
+ /* check if bus is busy */
+ if (!!(readl(iproc_i2c->base + M_CMD_OFFSET) &
+ BIT(M_CMD_START_BUSY_SHIFT))) {
+ dev_warn(iproc_i2c->device, "bus is busy\n");
+ return -EBUSY;
+ }
+
+ /* format and load slave address into the TX FIFO */
+ addr = msg->addr << 1 | (msg->flags & I2C_M_RD ? 1 : 0);
+ writel(addr, iproc_i2c->base + M_TX_OFFSET);
+
+ /* for a write transaction, load data into the TX FIFO */
+ if (!(msg->flags & I2C_M_RD)) {
+ for (i = 0; i < msg->len; i++) {
+ val = msg->buf[i];
+
+ /* mark the last byte */
+ if (i == msg->len - 1)
+ val |= 1 << M_TX_WR_STATUS_SHIFT;
+
+ writel(val, iproc_i2c->base + M_TX_OFFSET);
+ }
+ }
+
+ /* mark as incomplete before starting the transaction */
+ reinit_completion(&iproc_i2c->done);
+ iproc_i2c->xfer_is_done = 0;
+
+ /*
+ * Enable the "start busy" interrupt, which will be triggered after the
+ * transaction is done, i.e., the internal start_busy bit, transitions
+ * from 1 to 0.
+ */
+ writel(1 << IE_M_START_BUSY_SHIFT, iproc_i2c->base + IE_OFFSET);
+
+ /*
+ * Now we can activate the transfer. For a read operation, specify the
+ * number of bytes to read
+ */
+ val = 1 << M_CMD_START_BUSY_SHIFT;
+ if (msg->flags & I2C_M_RD) {
+ val |= (M_CMD_PROTOCOL_BLK_RD << M_CMD_PROTOCOL_SHIFT) |
+ (msg->len << M_CMD_RD_CNT_SHIFT);
+ } else {
+ val |= (M_CMD_PROTOCOL_BLK_WR << M_CMD_PROTOCOL_SHIFT);
+ }
+ writel(val, iproc_i2c->base + M_CMD_OFFSET);
+
+ time_left = wait_for_completion_timeout(&iproc_i2c->done, time_left);
+
+ /* disable all interrupts */
+ writel(0, iproc_i2c->base + IE_OFFSET);
+ /* read it back to flush the write */
+ readl(iproc_i2c->base + IE_OFFSET);
+
+ /* make sure the interrupt handler isn't running */
+ synchronize_irq(iproc_i2c->irq);
+
+ if (!time_left && !iproc_i2c->xfer_is_done) {
+ dev_err(iproc_i2c->device, "transaction timed out\n");
+
+ /* flush FIFOs */
+ val = (1 << M_FIFO_RX_FLUSH_SHIFT) |
+ (1 << M_FIFO_TX_FLUSH_SHIFT);
+ writel(val, iproc_i2c->base + M_FIFO_CTRL_OFFSET);
+ return -ETIMEDOUT;
+ }
+
+ ret = bcm_iproc_i2c_check_status(iproc_i2c, msg);
+ if (ret) {
+ /* flush both TX/RX FIFOs */
+ val = (1 << M_FIFO_RX_FLUSH_SHIFT) |
+ (1 << M_FIFO_TX_FLUSH_SHIFT);
+ writel(val, iproc_i2c->base + M_FIFO_CTRL_OFFSET);
+ return ret;
+ }
+
+ /*
+ * For a read operation, we now need to load the data from FIFO
+ * into the memory buffer
+ */
+ if (msg->flags & I2C_M_RD) {
+ for (i = 0; i < msg->len; i++) {
+ msg->buf[i] = (readl(iproc_i2c->base + M_RX_OFFSET) >>
+ M_RX_DATA_SHIFT) & M_RX_DATA_MASK;
+ }
+ }
+
+ return 0;
+}
+
+static int bcm_iproc_i2c_xfer(struct i2c_adapter *adapter,
+ struct i2c_msg msgs[], int num)
+{
+ struct bcm_iproc_i2c_dev *iproc_i2c = i2c_get_adapdata(adapter);
+ int ret, i;
+
+ /* go through all messages */
+ for (i = 0; i < num; i++) {
+ ret = bcm_iproc_i2c_xfer_single_msg(iproc_i2c, &msgs[i]);
+ if (ret) {
+ dev_dbg(iproc_i2c->device, "xfer failed\n");
+ return ret;
+ }
+ }
+
+ return num;
+}
+
+static uint32_t bcm_iproc_i2c_functionality(struct i2c_adapter *adap)
+{
+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static const struct i2c_algorithm bcm_iproc_algo = {
+ .master_xfer = bcm_iproc_i2c_xfer,
+ .functionality = bcm_iproc_i2c_functionality,
+};
+
+static int bcm_iproc_i2c_cfg_speed(struct bcm_iproc_i2c_dev *iproc_i2c)
+{
+ unsigned int bus_speed;
+ u32 val;
+ int ret = of_property_read_u32(iproc_i2c->device->of_node,
+ "clock-frequency", &bus_speed);
+ if (ret < 0) {
+ dev_info(iproc_i2c->device,
+ "unable to interpret clock-frequency DT property\n");
+ bus_speed = 100000;
+ }
+
+ if (bus_speed < 100000) {
+ dev_err(iproc_i2c->device, "%d Hz bus speed not supported\n",
+ bus_speed);
+ dev_err(iproc_i2c->device,
+ "valid speeds are 100khz and 400khz\n");
+ return -EINVAL;
+ } else if (bus_speed < 400000) {
+ bus_speed = 100000;
+ } else {
+ bus_speed = 400000;
+ }
+
+ val = readl(iproc_i2c->base + TIM_CFG_OFFSET);
+ val &= ~(1 << TIM_CFG_MODE_400_SHIFT);
+ val |= (bus_speed == 400000) << TIM_CFG_MODE_400_SHIFT;
+ writel(val, iproc_i2c->base + TIM_CFG_OFFSET);
+
+ dev_info(iproc_i2c->device, "bus set to %u Hz\n", bus_speed);
+
+ return 0;
+}
+
+static int bcm_iproc_i2c_init(struct bcm_iproc_i2c_dev *iproc_i2c)
+{
+ u32 val;
+
+ /* put controller in reset */
+ val = readl(iproc_i2c->base + CFG_OFFSET);
+ val |= 1 << CFG_RESET_SHIFT;
+ val &= ~(1 << CFG_EN_SHIFT);
+ writel(val, iproc_i2c->base + CFG_OFFSET);
+
+ /* wait 100 usec per spec */
+ udelay(100);
+
+ /* bring controller out of reset */
+ val &= ~(1 << CFG_RESET_SHIFT);
+ writel(val, iproc_i2c->base + CFG_OFFSET);
+
+ /* flush TX/RX FIFOs and set RX FIFO threshold to zero */
+ val = (1 << M_FIFO_RX_FLUSH_SHIFT) | (1 << M_FIFO_TX_FLUSH_SHIFT);
+ writel(val, iproc_i2c->base + M_FIFO_CTRL_OFFSET);
+
+ /* disable all interrupts */
+ writel(0, iproc_i2c->base + IE_OFFSET);
+
+ /* clear all pending interrupts */
+ writel(0xffffffff, iproc_i2c->base + IS_OFFSET);
+
+ return 0;
+}
+
+static void bcm_iproc_i2c_enable_disable(struct bcm_iproc_i2c_dev *iproc_i2c,
+ bool enable)
+{
+ u32 val;
+
+ val = readl(iproc_i2c->base + CFG_OFFSET);
+ if (enable)
+ val |= BIT(CFG_EN_SHIFT);
+ else
+ val &= ~BIT(CFG_EN_SHIFT);
+ writel(val, iproc_i2c->base + CFG_OFFSET);
+}
+
+static int bcm_iproc_i2c_probe(struct platform_device *pdev)
+{
+ int irq, ret = 0;
+ struct bcm_iproc_i2c_dev *iproc_i2c;
+ struct i2c_adapter *adap;
+ struct resource *res;
+
+ iproc_i2c = devm_kzalloc(&pdev->dev, sizeof(*iproc_i2c),
+ GFP_KERNEL);
+ if (!iproc_i2c)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, iproc_i2c);
+ iproc_i2c->device = &pdev->dev;
+ init_completion(&iproc_i2c->done);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ iproc_i2c->base = devm_ioremap_resource(iproc_i2c->device, res);
+ if (IS_ERR(iproc_i2c->base))
+ return PTR_ERR(iproc_i2c->base);
+
+ ret = bcm_iproc_i2c_init(iproc_i2c);
+ if (ret)
+ return ret;
+
+ ret = bcm_iproc_i2c_cfg_speed(iproc_i2c);
+ if (ret)
+ return ret;
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq <= 0) {
+ dev_err(iproc_i2c->device, "no irq resource\n");
+ return irq;
+ }
+ iproc_i2c->irq = irq;
+
+ ret = devm_request_irq(iproc_i2c->device, irq, bcm_iproc_i2c_isr, 0,
+ pdev->name, iproc_i2c);
+ if (ret < 0) {
+ dev_err(iproc_i2c->device, "unable to request irq %i\n", irq);
+ return ret;
+ }
+
+ bcm_iproc_i2c_enable_disable(iproc_i2c, true);
+
+ adap = &iproc_i2c->adapter;
+ i2c_set_adapdata(adap, iproc_i2c);
+ strlcpy(adap->name, "Broadcom iProc I2C adapter", sizeof(adap->name));
+ adap->algo = &bcm_iproc_algo;
+ adap->dev.parent = &pdev->dev;
+ adap->dev.of_node = pdev->dev.of_node;
+
+ ret = i2c_add_adapter(adap);
+ if (ret) {
+ dev_err(iproc_i2c->device, "failed to add adapter\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static int bcm_iproc_i2c_remove(struct platform_device *pdev)
+{
+ struct bcm_iproc_i2c_dev *iproc_i2c = platform_get_drvdata(pdev);
+
+ /* make sure there's no pending interrupt when we remove the adapter */
+ writel(0, iproc_i2c->base + IE_OFFSET);
+ readl(iproc_i2c->base + IE_OFFSET);
+ synchronize_irq(iproc_i2c->irq);
+
+ i2c_del_adapter(&iproc_i2c->adapter);
+ bcm_iproc_i2c_enable_disable(iproc_i2c, false);
+
+ return 0;
+}
+
+static const struct of_device_id bcm_iproc_i2c_of_match[] = {
+ { .compatible = "brcm,iproc-i2c" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, bcm_iproc_i2c_of_match);
+
+static struct platform_driver bcm_iproc_i2c_driver = {
+ .driver = {
+ .name = "bcm-iproc-i2c",
+ .of_match_table = bcm_iproc_i2c_of_match,
+ },
+ .probe = bcm_iproc_i2c_probe,
+ .remove = bcm_iproc_i2c_remove,
+};
+module_platform_driver(bcm_iproc_i2c_driver);
+
+MODULE_AUTHOR("Ray Jui <rjui@broadcom.com>");
+MODULE_DESCRIPTION("Broadcom iProc I2C Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/i2c/busses/i2c-cadence.c b/drivers/i2c/busses/i2c-cadence.c
index 626f74ecd4b..7d7a14cdadf 100644
--- a/drivers/i2c/busses/i2c-cadence.c
+++ b/drivers/i2c/busses/i2c-cadence.c
@@ -128,6 +128,7 @@
* @suspended: Flag holding the device's PM status
* @send_count: Number of bytes still expected to send
* @recv_count: Number of bytes still expected to receive
+ * @curr_recv_count: Number of bytes to be received in current transfer
* @irq: IRQ number
* @input_clk: Input clock to I2C controller
* @i2c_clk: Maximum I2C clock speed
@@ -146,6 +147,7 @@ struct cdns_i2c {
u8 suspended;
unsigned int send_count;
unsigned int recv_count;
+ unsigned int curr_recv_count;
int irq;
unsigned long input_clk;
unsigned int i2c_clk;
@@ -182,14 +184,15 @@ static void cdns_i2c_clear_bus_hold(struct cdns_i2c *id)
*/
static irqreturn_t cdns_i2c_isr(int irq, void *ptr)
{
- unsigned int isr_status, avail_bytes;
- unsigned int bytes_to_recv, bytes_to_send;
+ unsigned int isr_status, avail_bytes, updatetx;
+ unsigned int bytes_to_send;
struct cdns_i2c *id = ptr;
/* Signal completion only after everything is updated */
int done_flag = 0;
irqreturn_t status = IRQ_NONE;
isr_status = cdns_i2c_readreg(CDNS_I2C_ISR_OFFSET);
+ cdns_i2c_writereg(isr_status, CDNS_I2C_ISR_OFFSET);
/* Handling nack and arbitration lost interrupt */
if (isr_status & (CDNS_I2C_IXR_NACK | CDNS_I2C_IXR_ARB_LOST)) {
@@ -197,89 +200,112 @@ static irqreturn_t cdns_i2c_isr(int irq, void *ptr)
status = IRQ_HANDLED;
}
- /* Handling Data interrupt */
- if ((isr_status & CDNS_I2C_IXR_DATA) &&
- (id->recv_count >= CDNS_I2C_DATA_INTR_DEPTH)) {
- /* Always read data interrupt threshold bytes */
- bytes_to_recv = CDNS_I2C_DATA_INTR_DEPTH;
- id->recv_count -= CDNS_I2C_DATA_INTR_DEPTH;
- avail_bytes = cdns_i2c_readreg(CDNS_I2C_XFER_SIZE_OFFSET);
-
- /*
- * if the tranfer size register value is zero, then
- * check for the remaining bytes and update the
- * transfer size register.
- */
- if (!avail_bytes) {
- if (id->recv_count > CDNS_I2C_TRANSFER_SIZE)
- cdns_i2c_writereg(CDNS_I2C_TRANSFER_SIZE,
- CDNS_I2C_XFER_SIZE_OFFSET);
- else
- cdns_i2c_writereg(id->recv_count,
- CDNS_I2C_XFER_SIZE_OFFSET);
- }
+ /*
+ * Check if transfer size register needs to be updated again for a
+ * large data receive operation.
+ */
+ updatetx = 0;
+ if (id->recv_count > id->curr_recv_count)
+ updatetx = 1;
+
+ /* When receiving, handle data interrupt and completion interrupt */
+ if (id->p_recv_buf &&
+ ((isr_status & CDNS_I2C_IXR_COMP) ||
+ (isr_status & CDNS_I2C_IXR_DATA))) {
+ /* Read data if receive data valid is set */
+ while (cdns_i2c_readreg(CDNS_I2C_SR_OFFSET) &
+ CDNS_I2C_SR_RXDV) {
+ /*
+ * Clear hold bit that was set for FIFO control if
+ * RX data left is less than FIFO depth, unless
+ * repeated start is selected.
+ */
+ if ((id->recv_count < CDNS_I2C_FIFO_DEPTH) &&
+ !id->bus_hold_flag)
+ cdns_i2c_clear_bus_hold(id);
- /* Process the data received */
- while (bytes_to_recv--)
*(id->p_recv_buf)++ =
cdns_i2c_readreg(CDNS_I2C_DATA_OFFSET);
+ id->recv_count--;
+ id->curr_recv_count--;
- if (!id->bus_hold_flag &&
- (id->recv_count <= CDNS_I2C_FIFO_DEPTH))
- cdns_i2c_clear_bus_hold(id);
+ if (updatetx &&
+ (id->curr_recv_count == CDNS_I2C_FIFO_DEPTH + 1))
+ break;
+ }
- status = IRQ_HANDLED;
- }
+ /*
+ * The controller sends NACK to the slave when transfer size
+ * register reaches zero without considering the HOLD bit.
+ * This workaround is implemented for large data transfers to
+ * maintain transfer size non-zero while performing a large
+ * receive operation.
+ */
+ if (updatetx &&
+ (id->curr_recv_count == CDNS_I2C_FIFO_DEPTH + 1)) {
+ /* wait while fifo is full */
+ while (cdns_i2c_readreg(CDNS_I2C_XFER_SIZE_OFFSET) !=
+ (id->curr_recv_count - CDNS_I2C_FIFO_DEPTH))
+ ;
- /* Handling Transfer Complete interrupt */
- if (isr_status & CDNS_I2C_IXR_COMP) {
- if (!id->p_recv_buf) {
/*
- * If the device is sending data If there is further
- * data to be sent. Calculate the available space
- * in FIFO and fill the FIFO with that many bytes.
+ * Check number of bytes to be received against maximum
+ * transfer size and update register accordingly.
*/
- if (id->send_count) {
- avail_bytes = CDNS_I2C_FIFO_DEPTH -
- cdns_i2c_readreg(CDNS_I2C_XFER_SIZE_OFFSET);
- if (id->send_count > avail_bytes)
- bytes_to_send = avail_bytes;
- else
- bytes_to_send = id->send_count;
-
- while (bytes_to_send--) {
- cdns_i2c_writereg(
- (*(id->p_send_buf)++),
- CDNS_I2C_DATA_OFFSET);
- id->send_count--;
- }
+ if (((int)(id->recv_count) - CDNS_I2C_FIFO_DEPTH) >
+ CDNS_I2C_TRANSFER_SIZE) {
+ cdns_i2c_writereg(CDNS_I2C_TRANSFER_SIZE,
+ CDNS_I2C_XFER_SIZE_OFFSET);
+ id->curr_recv_count = CDNS_I2C_TRANSFER_SIZE +
+ CDNS_I2C_FIFO_DEPTH;
} else {
- /*
- * Signal the completion of transaction and
- * clear the hold bus bit if there are no
- * further messages to be processed.
- */
- done_flag = 1;
+ cdns_i2c_writereg(id->recv_count -
+ CDNS_I2C_FIFO_DEPTH,
+ CDNS_I2C_XFER_SIZE_OFFSET);
+ id->curr_recv_count = id->recv_count;
}
- if (!id->send_count && !id->bus_hold_flag)
- cdns_i2c_clear_bus_hold(id);
- } else {
+ }
+
+ /* Clear hold (if not repeated start) and signal completion */
+ if ((isr_status & CDNS_I2C_IXR_COMP) && !id->recv_count) {
if (!id->bus_hold_flag)
cdns_i2c_clear_bus_hold(id);
+ done_flag = 1;
+ }
+
+ status = IRQ_HANDLED;
+ }
+
+ /* When sending, handle transfer complete interrupt */
+ if ((isr_status & CDNS_I2C_IXR_COMP) && !id->p_recv_buf) {
+ /*
+ * If there is more data to be sent, calculate the
+ * space available in FIFO and fill with that many bytes.
+ */
+ if (id->send_count) {
+ avail_bytes = CDNS_I2C_FIFO_DEPTH -
+ cdns_i2c_readreg(CDNS_I2C_XFER_SIZE_OFFSET);
+ if (id->send_count > avail_bytes)
+ bytes_to_send = avail_bytes;
+ else
+ bytes_to_send = id->send_count;
+
+ while (bytes_to_send--) {
+ cdns_i2c_writereg(
+ (*(id->p_send_buf)++),
+ CDNS_I2C_DATA_OFFSET);
+ id->send_count--;
+ }
+ } else {
/*
- * If the device is receiving data, then signal
- * the completion of transaction and read the data
- * present in the FIFO. Signal the completion of
- * transaction.
+ * Signal the completion of transaction and
+ * clear the hold bus bit if there are no
+ * further messages to be processed.
*/
- while (cdns_i2c_readreg(CDNS_I2C_SR_OFFSET) &
- CDNS_I2C_SR_RXDV) {
- *(id->p_recv_buf)++ =
- cdns_i2c_readreg(CDNS_I2C_DATA_OFFSET);
- id->recv_count--;
- }
done_flag = 1;
}
+ if (!id->send_count && !id->bus_hold_flag)
+ cdns_i2c_clear_bus_hold(id);
status = IRQ_HANDLED;
}
@@ -289,8 +315,6 @@ static irqreturn_t cdns_i2c_isr(int irq, void *ptr)
if (id->err_status)
status = IRQ_HANDLED;
- cdns_i2c_writereg(isr_status, CDNS_I2C_ISR_OFFSET);
-
if (done_flag)
complete(&id->xfer_done);
@@ -316,6 +340,8 @@ static void cdns_i2c_mrecv(struct cdns_i2c *id)
if (id->p_msg->flags & I2C_M_RECV_LEN)
id->recv_count = I2C_SMBUS_BLOCK_MAX + 1;
+ id->curr_recv_count = id->recv_count;
+
/*
* Check for the message size against FIFO depth and set the
* 'hold bus' bit if it is greater than FIFO depth.
@@ -335,11 +361,14 @@ static void cdns_i2c_mrecv(struct cdns_i2c *id)
* receive if it is less than transfer size and transfer size if
* it is more. Enable the interrupts.
*/
- if (id->recv_count > CDNS_I2C_TRANSFER_SIZE)
+ if (id->recv_count > CDNS_I2C_TRANSFER_SIZE) {
cdns_i2c_writereg(CDNS_I2C_TRANSFER_SIZE,
CDNS_I2C_XFER_SIZE_OFFSET);
- else
+ id->curr_recv_count = CDNS_I2C_TRANSFER_SIZE;
+ } else {
cdns_i2c_writereg(id->recv_count, CDNS_I2C_XFER_SIZE_OFFSET);
+ }
+
/* Clear the bus hold flag if bytes to receive is less than FIFO size */
if (!id->bus_hold_flag &&
((id->p_msg->flags & I2C_M_RECV_LEN) != I2C_M_RECV_LEN) &&
@@ -516,6 +545,20 @@ static int cdns_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
* processed with a repeated start.
*/
if (num > 1) {
+ /*
+ * This controller does not give completion interrupt after a
+ * master receive message if HOLD bit is set (repeated start),
+ * resulting in SW timeout. Hence, if a receive message is
+ * followed by any other message, an error is returned
+ * indicating that this sequence is not supported.
+ */
+ for (count = 0; count < num - 1; count++) {
+ if (msgs[count].flags & I2C_M_RD) {
+ dev_warn(adap->dev.parent,
+ "Can't do repeated start after a receive message\n");
+ return -EOPNOTSUPP;
+ }
+ }
id->bus_hold_flag = 1;
reg = cdns_i2c_readreg(CDNS_I2C_CR_OFFSET);
reg |= CDNS_I2C_CR_HOLD;
diff --git a/drivers/i2c/busses/i2c-designware-baytrail.c b/drivers/i2c/busses/i2c-designware-baytrail.c
new file mode 100644
index 00000000000..5f1ff4cc5c3
--- /dev/null
+++ b/drivers/i2c/busses/i2c-designware-baytrail.c
@@ -0,0 +1,160 @@
+/*
+ * Intel BayTrail PMIC I2C bus semaphore implementaion
+ * Copyright (c) 2014, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/acpi.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <asm/iosf_mbi.h>
+#include "i2c-designware-core.h"
+
+#define SEMAPHORE_TIMEOUT 100
+#define PUNIT_SEMAPHORE 0x7
+
+static unsigned long acquired;
+
+static int get_sem(struct device *dev, u32 *sem)
+{
+ u32 reg_val;
+ int ret;
+
+ ret = iosf_mbi_read(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_READ, PUNIT_SEMAPHORE,
+ &reg_val);
+ if (ret) {
+ dev_err(dev, "iosf failed to read punit semaphore\n");
+ return ret;
+ }
+
+ *sem = reg_val & 0x1;
+
+ return 0;
+}
+
+static void reset_semaphore(struct device *dev)
+{
+ u32 data;
+
+ if (iosf_mbi_read(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_READ,
+ PUNIT_SEMAPHORE, &data)) {
+ dev_err(dev, "iosf failed to reset punit semaphore during read\n");
+ return;
+ }
+
+ data = data & 0xfffffffe;
+ if (iosf_mbi_write(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_WRITE,
+ PUNIT_SEMAPHORE, data))
+ dev_err(dev, "iosf failed to reset punit semaphore during write\n");
+}
+
+int baytrail_i2c_acquire(struct dw_i2c_dev *dev)
+{
+ u32 sem = 0;
+ int ret;
+ unsigned long start, end;
+
+ if (!dev || !dev->dev)
+ return -ENODEV;
+
+ if (!dev->acquire_lock)
+ return 0;
+
+ /* host driver writes 0x2 to side band semaphore register */
+ ret = iosf_mbi_write(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_WRITE,
+ PUNIT_SEMAPHORE, 0x2);
+ if (ret) {
+ dev_err(dev->dev, "iosf punit semaphore request failed\n");
+ return ret;
+ }
+
+ /* host driver waits for bit 0 to be set in semaphore register */
+ start = jiffies;
+ end = start + msecs_to_jiffies(SEMAPHORE_TIMEOUT);
+ while (!time_after(jiffies, end)) {
+ ret = get_sem(dev->dev, &sem);
+ if (!ret && sem) {
+ acquired = jiffies;
+ dev_dbg(dev->dev, "punit semaphore acquired after %ums\n",
+ jiffies_to_msecs(jiffies - start));
+ return 0;
+ }
+
+ usleep_range(1000, 2000);
+ }
+
+ dev_err(dev->dev, "punit semaphore timed out, resetting\n");
+ reset_semaphore(dev->dev);
+
+ ret = iosf_mbi_read(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_READ,
+ PUNIT_SEMAPHORE, &sem);
+ if (!ret)
+ dev_err(dev->dev, "iosf failed to read punit semaphore\n");
+ else
+ dev_err(dev->dev, "PUNIT SEM: %d\n", sem);
+
+ WARN_ON(1);
+
+ return -ETIMEDOUT;
+}
+EXPORT_SYMBOL(baytrail_i2c_acquire);
+
+void baytrail_i2c_release(struct dw_i2c_dev *dev)
+{
+ if (!dev || !dev->dev)
+ return;
+
+ if (!dev->acquire_lock)
+ return;
+
+ reset_semaphore(dev->dev);
+ dev_dbg(dev->dev, "punit semaphore held for %ums\n",
+ jiffies_to_msecs(jiffies - acquired));
+}
+EXPORT_SYMBOL(baytrail_i2c_release);
+
+int i2c_dw_eval_lock_support(struct dw_i2c_dev *dev)
+{
+ acpi_status status;
+ unsigned long long shared_host = 0;
+ acpi_handle handle;
+
+ if (!dev || !dev->dev)
+ return 0;
+
+ handle = ACPI_HANDLE(dev->dev);
+ if (!handle)
+ return 0;
+
+ status = acpi_evaluate_integer(handle, "_SEM", NULL, &shared_host);
+
+ if (ACPI_FAILURE(status))
+ return 0;
+
+ if (shared_host) {
+ dev_info(dev->dev, "I2C bus managed by PUNIT\n");
+ dev->acquire_lock = baytrail_i2c_acquire;
+ dev->release_lock = baytrail_i2c_release;
+ dev->pm_runtime_disabled = true;
+ }
+
+ if (!iosf_mbi_available())
+ return -EPROBE_DEFER;
+
+ return 0;
+}
+EXPORT_SYMBOL(i2c_dw_eval_lock_support);
+
+MODULE_AUTHOR("David E. Box <david.e.box@linux.intel.com>");
+MODULE_DESCRIPTION("Baytrail I2C Semaphore driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c
index 23628b7bfb8..6e25c010e69 100644
--- a/drivers/i2c/busses/i2c-designware-core.c
+++ b/drivers/i2c/busses/i2c-designware-core.c
@@ -170,10 +170,10 @@ u32 dw_readl(struct dw_i2c_dev *dev, int offset)
u32 value;
if (dev->accessor_flags & ACCESS_16BIT)
- value = readw(dev->base + offset) |
- (readw(dev->base + offset + 2) << 16);
+ value = readw_relaxed(dev->base + offset) |
+ (readw_relaxed(dev->base + offset + 2) << 16);
else
- value = readl(dev->base + offset);
+ value = readl_relaxed(dev->base + offset);
if (dev->accessor_flags & ACCESS_SWAP)
return swab32(value);
@@ -187,10 +187,10 @@ void dw_writel(struct dw_i2c_dev *dev, u32 b, int offset)
b = swab32(b);
if (dev->accessor_flags & ACCESS_16BIT) {
- writew((u16)b, dev->base + offset);
- writew((u16)(b >> 16), dev->base + offset + 2);
+ writew_relaxed((u16)b, dev->base + offset);
+ writew_relaxed((u16)(b >> 16), dev->base + offset + 2);
} else {
- writel(b, dev->base + offset);
+ writel_relaxed(b, dev->base + offset);
}
}
@@ -285,6 +285,15 @@ int i2c_dw_init(struct dw_i2c_dev *dev)
u32 hcnt, lcnt;
u32 reg;
u32 sda_falling_time, scl_falling_time;
+ int ret;
+
+ if (dev->acquire_lock) {
+ ret = dev->acquire_lock(dev);
+ if (ret) {
+ dev_err(dev->dev, "couldn't acquire bus ownership\n");
+ return ret;
+ }
+ }
input_clock_khz = dev->get_clk_rate_khz(dev);
@@ -298,6 +307,8 @@ int i2c_dw_init(struct dw_i2c_dev *dev)
} else if (reg != DW_IC_COMP_TYPE_VALUE) {
dev_err(dev->dev, "Unknown Synopsys component type: "
"0x%08x\n", reg);
+ if (dev->release_lock)
+ dev->release_lock(dev);
return -ENODEV;
}
@@ -309,40 +320,39 @@ int i2c_dw_init(struct dw_i2c_dev *dev)
sda_falling_time = dev->sda_falling_time ?: 300; /* ns */
scl_falling_time = dev->scl_falling_time ?: 300; /* ns */
- /* Standard-mode */
- hcnt = i2c_dw_scl_hcnt(input_clock_khz,
- 4000, /* tHD;STA = tHIGH = 4.0 us */
- sda_falling_time,
- 0, /* 0: DW default, 1: Ideal */
- 0); /* No offset */
- lcnt = i2c_dw_scl_lcnt(input_clock_khz,
- 4700, /* tLOW = 4.7 us */
- scl_falling_time,
- 0); /* No offset */
-
- /* Allow platforms to specify the ideal HCNT and LCNT values */
+ /* Set SCL timing parameters for standard-mode */
if (dev->ss_hcnt && dev->ss_lcnt) {
hcnt = dev->ss_hcnt;
lcnt = dev->ss_lcnt;
+ } else {
+ hcnt = i2c_dw_scl_hcnt(input_clock_khz,
+ 4000, /* tHD;STA = tHIGH = 4.0 us */
+ sda_falling_time,
+ 0, /* 0: DW default, 1: Ideal */
+ 0); /* No offset */
+ lcnt = i2c_dw_scl_lcnt(input_clock_khz,
+ 4700, /* tLOW = 4.7 us */
+ scl_falling_time,
+ 0); /* No offset */
}
dw_writel(dev, hcnt, DW_IC_SS_SCL_HCNT);
dw_writel(dev, lcnt, DW_IC_SS_SCL_LCNT);
dev_dbg(dev->dev, "Standard-mode HCNT:LCNT = %d:%d\n", hcnt, lcnt);
- /* Fast-mode */
- hcnt = i2c_dw_scl_hcnt(input_clock_khz,
- 600, /* tHD;STA = tHIGH = 0.6 us */
- sda_falling_time,
- 0, /* 0: DW default, 1: Ideal */
- 0); /* No offset */
- lcnt = i2c_dw_scl_lcnt(input_clock_khz,
- 1300, /* tLOW = 1.3 us */
- scl_falling_time,
- 0); /* No offset */
-
+ /* Set SCL timing parameters for fast-mode */
if (dev->fs_hcnt && dev->fs_lcnt) {
hcnt = dev->fs_hcnt;
lcnt = dev->fs_lcnt;
+ } else {
+ hcnt = i2c_dw_scl_hcnt(input_clock_khz,
+ 600, /* tHD;STA = tHIGH = 0.6 us */
+ sda_falling_time,
+ 0, /* 0: DW default, 1: Ideal */
+ 0); /* No offset */
+ lcnt = i2c_dw_scl_lcnt(input_clock_khz,
+ 1300, /* tLOW = 1.3 us */
+ scl_falling_time,
+ 0); /* No offset */
}
dw_writel(dev, hcnt, DW_IC_FS_SCL_HCNT);
dw_writel(dev, lcnt, DW_IC_FS_SCL_LCNT);
@@ -364,6 +374,9 @@ int i2c_dw_init(struct dw_i2c_dev *dev)
/* configure the i2c master */
dw_writel(dev, dev->master_cfg , DW_IC_CON);
+
+ if (dev->release_lock)
+ dev->release_lock(dev);
return 0;
}
EXPORT_SYMBOL_GPL(i2c_dw_init);
@@ -627,6 +640,14 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
dev->abort_source = 0;
dev->rx_outstanding = 0;
+ if (dev->acquire_lock) {
+ ret = dev->acquire_lock(dev);
+ if (ret) {
+ dev_err(dev->dev, "couldn't acquire bus ownership\n");
+ goto done_nolock;
+ }
+ }
+
ret = i2c_dw_wait_bus_not_busy(dev);
if (ret < 0)
goto done;
@@ -672,6 +693,10 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
ret = -EIO;
done:
+ if (dev->release_lock)
+ dev->release_lock(dev);
+
+done_nolock:
pm_runtime_mark_last_busy(dev->dev);
pm_runtime_put_autosuspend(dev->dev);
mutex_unlock(&dev->lock);
diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h
index 5a410ef17ab..9630222abf3 100644
--- a/drivers/i2c/busses/i2c-designware-core.h
+++ b/drivers/i2c/busses/i2c-designware-core.h
@@ -61,6 +61,9 @@
* @ss_lcnt: standard speed LCNT value
* @fs_hcnt: fast speed HCNT value
* @fs_lcnt: fast speed LCNT value
+ * @acquire_lock: function to acquire a hardware lock on the bus
+ * @release_lock: function to release a hardware lock on the bus
+ * @pm_runtime_disabled: true if pm runtime is disabled
*
* HCNT and LCNT parameters can be used if the platform knows more accurate
* values than the one computed based only on the input clock frequency.
@@ -101,6 +104,9 @@ struct dw_i2c_dev {
u16 ss_lcnt;
u16 fs_hcnt;
u16 fs_lcnt;
+ int (*acquire_lock)(struct dw_i2c_dev *dev);
+ void (*release_lock)(struct dw_i2c_dev *dev);
+ bool pm_runtime_disabled;
};
#define ACCESS_SWAP 0x00000001
@@ -119,3 +125,9 @@ extern void i2c_dw_disable(struct dw_i2c_dev *dev);
extern void i2c_dw_clear_int(struct dw_i2c_dev *dev);
extern void i2c_dw_disable_int(struct dw_i2c_dev *dev);
extern u32 i2c_dw_read_comp_param(struct dw_i2c_dev *dev);
+
+#if IS_ENABLED(CONFIG_I2C_DESIGNWARE_BAYTRAIL)
+extern int i2c_dw_eval_lock_support(struct dw_i2c_dev *dev);
+#else
+static inline int i2c_dw_eval_lock_support(struct dw_i2c_dev *dev) { return 0; }
+#endif
diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c
index acb40f95db7..6643d2dc0b2 100644
--- a/drivers/i2c/busses/i2c-designware-pcidrv.c
+++ b/drivers/i2c/busses/i2c-designware-pcidrv.c
@@ -6,7 +6,7 @@
* Copyright (C) 2006 Texas Instruments.
* Copyright (C) 2007 MontaVista Software Inc.
* Copyright (C) 2009 Provigent Ltd.
- * Copyright (C) 2011 Intel corporation.
+ * Copyright (C) 2011, 2015 Intel Corporation.
*
* ----------------------------------------------------------------------------
*
@@ -40,10 +40,6 @@
#define DRIVER_NAME "i2c-designware-pci"
enum dw_pci_ctl_id_t {
- moorestown_0,
- moorestown_1,
- moorestown_2,
-
medfield_0,
medfield_1,
medfield_2,
@@ -101,28 +97,7 @@ static struct dw_scl_sda_cfg hsw_config = {
.sda_hold = 0x9,
};
-static struct dw_pci_controller dw_pci_controllers[] = {
- [moorestown_0] = {
- .bus_num = 0,
- .bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
- .tx_fifo_depth = 32,
- .rx_fifo_depth = 32,
- .clk_khz = 25000,
- },
- [moorestown_1] = {
- .bus_num = 1,
- .bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
- .tx_fifo_depth = 32,
- .rx_fifo_depth = 32,
- .clk_khz = 25000,
- },
- [moorestown_2] = {
- .bus_num = 2,
- .bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
- .tx_fifo_depth = 32,
- .rx_fifo_depth = 32,
- .clk_khz = 25000,
- },
+static struct dw_pci_controller dw_pci_controllers[] = {
[medfield_0] = {
.bus_num = 0,
.bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
@@ -170,7 +145,6 @@ static struct dw_pci_controller dw_pci_controllers[] = {
.bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
.tx_fifo_depth = 32,
.rx_fifo_depth = 32,
- .clk_khz = 100000,
.functionality = I2C_FUNC_10BIT_ADDR,
.scl_sda_cfg = &byt_config,
},
@@ -179,7 +153,6 @@ static struct dw_pci_controller dw_pci_controllers[] = {
.bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
.tx_fifo_depth = 32,
.rx_fifo_depth = 32,
- .clk_khz = 100000,
.functionality = I2C_FUNC_10BIT_ADDR,
.scl_sda_cfg = &hsw_config,
},
@@ -259,7 +232,7 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev,
dev->functionality = controller->functionality |
DW_DEFAULT_FUNCTIONALITY;
- dev->master_cfg = controller->bus_cfg;
+ dev->master_cfg = controller->bus_cfg;
if (controller->scl_sda_cfg) {
cfg = controller->scl_sda_cfg;
dev->ss_hcnt = cfg->ss_hcnt;
@@ -325,12 +298,8 @@ static void i2c_dw_pci_remove(struct pci_dev *pdev)
MODULE_ALIAS("i2c_designware-pci");
static const struct pci_device_id i2_designware_pci_ids[] = {
- /* Moorestown */
- { PCI_VDEVICE(INTEL, 0x0802), moorestown_0 },
- { PCI_VDEVICE(INTEL, 0x0803), moorestown_1 },
- { PCI_VDEVICE(INTEL, 0x0804), moorestown_2 },
/* Medfield */
- { PCI_VDEVICE(INTEL, 0x0817), medfield_3,},
+ { PCI_VDEVICE(INTEL, 0x0817), medfield_3 },
{ PCI_VDEVICE(INTEL, 0x0818), medfield_4 },
{ PCI_VDEVICE(INTEL, 0x0819), medfield_5 },
{ PCI_VDEVICE(INTEL, 0x082C), medfield_0 },
@@ -348,7 +317,7 @@ static const struct pci_device_id i2_designware_pci_ids[] = {
{ PCI_VDEVICE(INTEL, 0x9c61), haswell },
{ PCI_VDEVICE(INTEL, 0x9c62), haswell },
/* Braswell / Cherrytrail */
- { PCI_VDEVICE(INTEL, 0x22C1), baytrail,},
+ { PCI_VDEVICE(INTEL, 0x22C1), baytrail },
{ PCI_VDEVICE(INTEL, 0x22C2), baytrail },
{ PCI_VDEVICE(INTEL, 0x22C3), baytrail },
{ PCI_VDEVICE(INTEL, 0x22C4), baytrail },
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index 2b463c313e4..c270f5f9a8f 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -195,6 +195,10 @@ static int dw_i2c_probe(struct platform_device *pdev)
clk_freq = pdata->i2c_scl_freq;
}
+ r = i2c_dw_eval_lock_support(dev);
+ if (r)
+ return r;
+
dev->functionality =
I2C_FUNC_I2C |
I2C_FUNC_10BIT_ADDR |
@@ -257,10 +261,14 @@ static int dw_i2c_probe(struct platform_device *pdev)
return r;
}
- pm_runtime_set_autosuspend_delay(&pdev->dev, 1000);
- pm_runtime_use_autosuspend(&pdev->dev);
- pm_runtime_set_active(&pdev->dev);
- pm_runtime_enable(&pdev->dev);
+ if (dev->pm_runtime_disabled) {
+ pm_runtime_forbid(&pdev->dev);
+ } else {
+ pm_runtime_set_autosuspend_delay(&pdev->dev, 1000);
+ pm_runtime_use_autosuspend(&pdev->dev);
+ pm_runtime_set_active(&pdev->dev);
+ pm_runtime_enable(&pdev->dev);
+ }
return 0;
}
@@ -310,7 +318,9 @@ static int dw_i2c_resume(struct device *dev)
struct dw_i2c_dev *i_dev = platform_get_drvdata(pdev);
clk_prepare_enable(i_dev->clk);
- i2c_dw_init(i_dev);
+
+ if (!i_dev->pm_runtime_disabled)
+ i2c_dw_init(i_dev);
return 0;
}
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index 7f3a9fe9bf4..d7b26fc6f43 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -201,7 +201,7 @@ struct imx_i2c_struct {
void __iomem *base;
wait_queue_head_t queue;
unsigned long i2csr;
- unsigned int disable_delay;
+ unsigned int disable_delay;
int stopped;
unsigned int ifdr; /* IMX_I2C_IFDR */
unsigned int cur_clk;
@@ -295,7 +295,6 @@ static void i2c_imx_dma_request(struct imx_i2c_struct *i2c_imx,
dma->chan_tx = dma_request_slave_channel(dev, "tx");
if (!dma->chan_tx) {
dev_dbg(dev, "can't request DMA tx channel\n");
- ret = -ENODEV;
goto fail_al;
}
@@ -313,7 +312,6 @@ static void i2c_imx_dma_request(struct imx_i2c_struct *i2c_imx,
dma->chan_rx = dma_request_slave_channel(dev, "rx");
if (!dma->chan_rx) {
dev_dbg(dev, "can't request DMA rx channel\n");
- ret = -ENODEV;
goto fail_tx;
}
@@ -481,8 +479,8 @@ static void i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx)
i2c_clk_rate = clk_get_rate(i2c_imx->clk);
if (i2c_imx->cur_clk == i2c_clk_rate)
return;
- else
- i2c_imx->cur_clk = i2c_clk_rate;
+
+ i2c_imx->cur_clk = i2c_clk_rate;
div = (i2c_clk_rate + i2c_imx->bitrate - 1) / i2c_imx->bitrate;
if (div < i2c_clk_div[0].div)
@@ -490,7 +488,8 @@ static void i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx)
else if (div > i2c_clk_div[i2c_imx->hwdata->ndivs - 1].div)
i = i2c_imx->hwdata->ndivs - 1;
else
- for (i = 0; i2c_clk_div[i].div < div; i++);
+ for (i = 0; i2c_clk_div[i].div < div; i++)
+ ;
/* Store divider value */
i2c_imx->ifdr = i2c_clk_div[i].val;
@@ -628,9 +627,9 @@ static int i2c_imx_dma_write(struct imx_i2c_struct *i2c_imx,
result = wait_for_completion_timeout(
&i2c_imx->dma->cmd_complete,
msecs_to_jiffies(DMA_TIMEOUT));
- if (result <= 0) {
+ if (result == 0) {
dmaengine_terminate_all(dma->chan_using);
- return result ?: -ETIMEDOUT;
+ return -ETIMEDOUT;
}
/* Waiting for transfer complete. */
@@ -686,9 +685,9 @@ static int i2c_imx_dma_read(struct imx_i2c_struct *i2c_imx,
result = wait_for_completion_timeout(
&i2c_imx->dma->cmd_complete,
msecs_to_jiffies(DMA_TIMEOUT));
- if (result <= 0) {
+ if (result == 0) {
dmaengine_terminate_all(dma->chan_using);
- return result ?: -ETIMEDOUT;
+ return -ETIMEDOUT;
}
/* waiting for transfer complete. */
@@ -822,6 +821,7 @@ static int i2c_imx_read(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs, bo
/* read data */
for (i = 0; i < msgs->len; i++) {
u8 len = 0;
+
result = i2c_imx_trx_complete(i2c_imx);
if (result)
return result;
@@ -917,15 +917,16 @@ static int i2c_imx_xfer(struct i2c_adapter *adapter,
/* write/read data */
#ifdef CONFIG_I2C_DEBUG_BUS
temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
- dev_dbg(&i2c_imx->adapter.dev, "<%s> CONTROL: IEN=%d, IIEN=%d, "
- "MSTA=%d, MTX=%d, TXAK=%d, RSTA=%d\n", __func__,
+ dev_dbg(&i2c_imx->adapter.dev,
+ "<%s> CONTROL: IEN=%d, IIEN=%d, MSTA=%d, MTX=%d, TXAK=%d, RSTA=%d\n",
+ __func__,
(temp & I2CR_IEN ? 1 : 0), (temp & I2CR_IIEN ? 1 : 0),
(temp & I2CR_MSTA ? 1 : 0), (temp & I2CR_MTX ? 1 : 0),
(temp & I2CR_TXAK ? 1 : 0), (temp & I2CR_RSTA ? 1 : 0));
temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR);
dev_dbg(&i2c_imx->adapter.dev,
- "<%s> STATUS: ICF=%d, IAAS=%d, IBB=%d, "
- "IAL=%d, SRW=%d, IIF=%d, RXAK=%d\n", __func__,
+ "<%s> STATUS: ICF=%d, IAAS=%d, IBB=%d, IAL=%d, SRW=%d, IIF=%d, RXAK=%d\n",
+ __func__,
(temp & I2SR_ICF ? 1 : 0), (temp & I2SR_IAAS ? 1 : 0),
(temp & I2SR_IBB ? 1 : 0), (temp & I2SR_IAL ? 1 : 0),
(temp & I2SR_SRW ? 1 : 0), (temp & I2SR_IIF ? 1 : 0),
@@ -1004,7 +1005,7 @@ static int i2c_imx_probe(struct platform_device *pdev)
i2c_imx->adapter.owner = THIS_MODULE;
i2c_imx->adapter.algo = &i2c_imx_algo;
i2c_imx->adapter.dev.parent = &pdev->dev;
- i2c_imx->adapter.nr = pdev->id;
+ i2c_imx->adapter.nr = pdev->id;
i2c_imx->adapter.dev.of_node = pdev->dev.of_node;
i2c_imx->base = base;
@@ -1063,7 +1064,7 @@ static int i2c_imx_probe(struct platform_device *pdev)
i2c_imx->adapter.name);
dev_info(&i2c_imx->adapter.dev, "IMX I2C adapter registered\n");
- /* Init DMA config if support*/
+ /* Init DMA config if supported */
i2c_imx_dma_request(i2c_imx, phy_addr);
return 0; /* Return OK */
diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c
index 7249b5b1e5d..abf5db7e441 100644
--- a/drivers/i2c/busses/i2c-ocores.c
+++ b/drivers/i2c/busses/i2c-ocores.c
@@ -12,6 +12,7 @@
* kind, whether express or implied.
*/
+#include <linux/clk.h>
#include <linux/err.h>
#include <linux/kernel.h>
#include <linux/module.h>
@@ -35,7 +36,9 @@ struct ocores_i2c {
int pos;
int nmsgs;
int state; /* see STATE_ */
- int clock_khz;
+ struct clk *clk;
+ int ip_clock_khz;
+ int bus_clock_khz;
void (*setreg)(struct ocores_i2c *i2c, int reg, u8 value);
u8 (*getreg)(struct ocores_i2c *i2c, int reg);
};
@@ -215,21 +218,34 @@ static int ocores_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
return -ETIMEDOUT;
}
-static void ocores_init(struct ocores_i2c *i2c)
+static int ocores_init(struct device *dev, struct ocores_i2c *i2c)
{
int prescale;
+ int diff;
u8 ctrl = oc_getreg(i2c, OCI2C_CONTROL);
/* make sure the device is disabled */
oc_setreg(i2c, OCI2C_CONTROL, ctrl & ~(OCI2C_CTRL_EN|OCI2C_CTRL_IEN));
- prescale = (i2c->clock_khz / (5*100)) - 1;
+ prescale = (i2c->ip_clock_khz / (5 * i2c->bus_clock_khz)) - 1;
+ prescale = clamp(prescale, 0, 0xffff);
+
+ diff = i2c->ip_clock_khz / (5 * (prescale + 1)) - i2c->bus_clock_khz;
+ if (abs(diff) > i2c->bus_clock_khz / 10) {
+ dev_err(dev,
+ "Unsupported clock settings: core: %d KHz, bus: %d KHz\n",
+ i2c->ip_clock_khz, i2c->bus_clock_khz);
+ return -EINVAL;
+ }
+
oc_setreg(i2c, OCI2C_PRELOW, prescale & 0xff);
oc_setreg(i2c, OCI2C_PREHIGH, prescale >> 8);
/* Init the device */
oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_IACK);
oc_setreg(i2c, OCI2C_CONTROL, ctrl | OCI2C_CTRL_IEN | OCI2C_CTRL_EN);
+
+ return 0;
}
@@ -304,6 +320,8 @@ static int ocores_i2c_of_probe(struct platform_device *pdev,
struct device_node *np = pdev->dev.of_node;
const struct of_device_id *match;
u32 val;
+ u32 clock_frequency;
+ bool clock_frequency_present;
if (of_property_read_u32(np, "reg-shift", &i2c->reg_shift)) {
/* no 'reg-shift', check for deprecated 'regstep' */
@@ -319,12 +337,42 @@ static int ocores_i2c_of_probe(struct platform_device *pdev,
}
}
- if (of_property_read_u32(np, "clock-frequency", &val)) {
- dev_err(&pdev->dev,
- "Missing required parameter 'clock-frequency'\n");
- return -ENODEV;
+ clock_frequency_present = !of_property_read_u32(np, "clock-frequency",
+ &clock_frequency);
+ i2c->bus_clock_khz = 100;
+
+ i2c->clk = devm_clk_get(&pdev->dev, NULL);
+
+ if (!IS_ERR(i2c->clk)) {
+ int ret = clk_prepare_enable(i2c->clk);
+
+ if (ret) {
+ dev_err(&pdev->dev,
+ "clk_prepare_enable failed: %d\n", ret);
+ return ret;
+ }
+ i2c->ip_clock_khz = clk_get_rate(i2c->clk) / 1000;
+ if (clock_frequency_present)
+ i2c->bus_clock_khz = clock_frequency / 1000;
+ }
+
+ if (i2c->ip_clock_khz == 0) {
+ if (of_property_read_u32(np, "opencores,ip-clock-frequency",
+ &val)) {
+ if (!clock_frequency_present) {
+ dev_err(&pdev->dev,
+ "Missing required parameter 'opencores,ip-clock-frequency'\n");
+ return -ENODEV;
+ }
+ i2c->ip_clock_khz = clock_frequency / 1000;
+ dev_warn(&pdev->dev,
+ "Deprecated usage of the 'clock-frequency' property, please update to 'opencores,ip-clock-frequency'\n");
+ } else {
+ i2c->ip_clock_khz = val / 1000;
+ if (clock_frequency_present)
+ i2c->bus_clock_khz = clock_frequency / 1000;
+ }
}
- i2c->clock_khz = val / 1000;
of_property_read_u32(pdev->dev.of_node, "reg-io-width",
&i2c->reg_io_width);
@@ -368,7 +416,8 @@ static int ocores_i2c_probe(struct platform_device *pdev)
if (pdata) {
i2c->reg_shift = pdata->reg_shift;
i2c->reg_io_width = pdata->reg_io_width;
- i2c->clock_khz = pdata->clock_khz;
+ i2c->ip_clock_khz = pdata->clock_khz;
+ i2c->bus_clock_khz = 100;
} else {
ret = ocores_i2c_of_probe(pdev, i2c);
if (ret)
@@ -402,7 +451,9 @@ static int ocores_i2c_probe(struct platform_device *pdev)
}
}
- ocores_init(i2c);
+ ret = ocores_init(&pdev->dev, i2c);
+ if (ret)
+ return ret;
init_waitqueue_head(&i2c->wait);
ret = devm_request_irq(&pdev->dev, irq, ocores_isr, 0,
@@ -446,6 +497,9 @@ static int ocores_i2c_remove(struct platform_device *pdev)
/* remove adapter & data */
i2c_del_adapter(&i2c->adap);
+ if (!IS_ERR(i2c->clk))
+ clk_disable_unprepare(i2c->clk);
+
return 0;
}
@@ -458,6 +512,8 @@ static int ocores_i2c_suspend(struct device *dev)
/* make sure the device is disabled */
oc_setreg(i2c, OCI2C_CONTROL, ctrl & ~(OCI2C_CTRL_EN|OCI2C_CTRL_IEN));
+ if (!IS_ERR(i2c->clk))
+ clk_disable_unprepare(i2c->clk);
return 0;
}
@@ -465,9 +521,20 @@ static int ocores_i2c_resume(struct device *dev)
{
struct ocores_i2c *i2c = dev_get_drvdata(dev);
- ocores_init(i2c);
+ if (!IS_ERR(i2c->clk)) {
+ unsigned long rate;
+ int ret = clk_prepare_enable(i2c->clk);
- return 0;
+ if (ret) {
+ dev_err(dev,
+ "clk_prepare_enable failed: %d\n", ret);
+ return ret;
+ }
+ rate = clk_get_rate(i2c->clk) / 1000;
+ if (rate)
+ i2c->ip_clock_khz = rate;
+ }
+ return ocores_init(dev, i2c);
}
static SIMPLE_DEV_PM_OPS(ocores_i2c_pm, ocores_i2c_suspend, ocores_i2c_resume);
diff --git a/drivers/i2c/busses/i2c-pmcmsp.c b/drivers/i2c/busses/i2c-pmcmsp.c
index 44f03eed00d..d37d9db6681 100644
--- a/drivers/i2c/busses/i2c-pmcmsp.c
+++ b/drivers/i2c/busses/i2c-pmcmsp.c
@@ -148,13 +148,6 @@ static inline u32 pmcmsptwi_clock_to_reg(
return ((clock->filter & 0xf) << 12) | (clock->clock & 0x03ff);
}
-static inline void pmcmsptwi_reg_to_clock(
- u32 reg, struct pmcmsptwi_clock *clock)
-{
- clock->filter = (reg >> 12) & 0xf;
- clock->clock = reg & 0x03ff;
-}
-
static inline u32 pmcmsptwi_cfg_to_reg(const struct pmcmsptwi_cfg *cfg)
{
return ((cfg->arbf & 0xf) << 12) |
diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c
index 92462843db6..5f96b1b3e3a 100644
--- a/drivers/i2c/busses/i2c-rk3x.c
+++ b/drivers/i2c/busses/i2c-rk3x.c
@@ -102,6 +102,9 @@ struct rk3x_i2c {
/* Settings */
unsigned int scl_frequency;
+ unsigned int scl_rise_ns;
+ unsigned int scl_fall_ns;
+ unsigned int sda_fall_ns;
/* Synchronization & notification */
spinlock_t lock;
@@ -435,6 +438,9 @@ out:
*
* @clk_rate: I2C input clock rate
* @scl_rate: Desired SCL rate
+ * @scl_rise_ns: How many ns it takes for SCL to rise.
+ * @scl_fall_ns: How many ns it takes for SCL to fall.
+ * @sda_fall_ns: How many ns it takes for SDA to fall.
* @div_low: Divider output for low
* @div_high: Divider output for high
*
@@ -443,11 +449,16 @@ out:
* too high, we silently use the highest possible rate.
*/
static int rk3x_i2c_calc_divs(unsigned long clk_rate, unsigned long scl_rate,
+ unsigned long scl_rise_ns,
+ unsigned long scl_fall_ns,
+ unsigned long sda_fall_ns,
unsigned long *div_low, unsigned long *div_high)
{
- unsigned long min_low_ns, min_high_ns;
- unsigned long max_data_hold_ns;
+ unsigned long spec_min_low_ns, spec_min_high_ns;
+ unsigned long spec_setup_start, spec_max_data_hold_ns;
unsigned long data_hold_buffer_ns;
+
+ unsigned long min_low_ns, min_high_ns;
unsigned long max_low_ns, min_total_ns;
unsigned long clk_rate_khz, scl_rate_khz;
@@ -469,29 +480,50 @@ static int rk3x_i2c_calc_divs(unsigned long clk_rate, unsigned long scl_rate,
scl_rate = 1000;
/*
- * min_low_ns: The minimum number of ns we need to hold low
- * to meet i2c spec
- * min_high_ns: The minimum number of ns we need to hold high
- * to meet i2c spec
- * max_low_ns: The maximum number of ns we can hold low
- * to meet i2c spec
+ * min_low_ns: The minimum number of ns we need to hold low to
+ * meet I2C specification, should include fall time.
+ * min_high_ns: The minimum number of ns we need to hold high to
+ * meet I2C specification, should include rise time.
+ * max_low_ns: The maximum number of ns we can hold low to meet
+ * I2C specification.
*
- * Note: max_low_ns should be (max data hold time * 2 - buffer)
+ * Note: max_low_ns should be (maximum data hold time * 2 - buffer)
* This is because the i2c host on Rockchip holds the data line
* for half the low time.
*/
if (scl_rate <= 100000) {
- min_low_ns = 4700;
- min_high_ns = 4000;
- max_data_hold_ns = 3450;
+ /* Standard-mode */
+ spec_min_low_ns = 4700;
+ spec_setup_start = 4700;
+ spec_min_high_ns = 4000;
+ spec_max_data_hold_ns = 3450;
data_hold_buffer_ns = 50;
} else {
- min_low_ns = 1300;
- min_high_ns = 600;
- max_data_hold_ns = 900;
+ /* Fast-mode */
+ spec_min_low_ns = 1300;
+ spec_setup_start = 600;
+ spec_min_high_ns = 600;
+ spec_max_data_hold_ns = 900;
data_hold_buffer_ns = 50;
}
- max_low_ns = max_data_hold_ns * 2 - data_hold_buffer_ns;
+ min_high_ns = scl_rise_ns + spec_min_high_ns;
+
+ /*
+ * Timings for repeated start:
+ * - controller appears to drop SDA at .875x (7/8) programmed clk high.
+ * - controller appears to keep SCL high for 2x programmed clk high.
+ *
+ * We need to account for those rules in picking our "high" time so
+ * we meet tSU;STA and tHD;STA times.
+ */
+ min_high_ns = max(min_high_ns,
+ DIV_ROUND_UP((scl_rise_ns + spec_setup_start) * 1000, 875));
+ min_high_ns = max(min_high_ns,
+ DIV_ROUND_UP((scl_rise_ns + spec_setup_start +
+ sda_fall_ns + spec_min_high_ns), 2));
+
+ min_low_ns = scl_fall_ns + spec_min_low_ns;
+ max_low_ns = spec_max_data_hold_ns * 2 - data_hold_buffer_ns;
min_total_ns = min_low_ns + min_high_ns;
/* Adjust to avoid overflow */
@@ -510,8 +542,8 @@ static int rk3x_i2c_calc_divs(unsigned long clk_rate, unsigned long scl_rate,
min_div_for_hold = (min_low_div + min_high_div);
/*
- * This is the maximum divider so we don't go over the max.
- * We don't round up here (we round down) since this is a max.
+ * This is the maximum divider so we don't go over the maximum.
+ * We don't round up here (we round down) since this is a maximum.
*/
max_low_div = clk_rate_khz * max_low_ns / (8 * 1000000);
@@ -544,7 +576,7 @@ static int rk3x_i2c_calc_divs(unsigned long clk_rate, unsigned long scl_rate,
ideal_low_div = DIV_ROUND_UP(clk_rate_khz * min_low_ns,
scl_rate_khz * 8 * min_total_ns);
- /* Don't allow it to go over the max */
+ /* Don't allow it to go over the maximum */
if (ideal_low_div > max_low_div)
ideal_low_div = max_low_div;
@@ -588,9 +620,9 @@ static void rk3x_i2c_adapt_div(struct rk3x_i2c *i2c, unsigned long clk_rate)
u64 t_low_ns, t_high_ns;
int ret;
- ret = rk3x_i2c_calc_divs(clk_rate, i2c->scl_frequency, &div_low,
- &div_high);
-
+ ret = rk3x_i2c_calc_divs(clk_rate, i2c->scl_frequency, i2c->scl_rise_ns,
+ i2c->scl_fall_ns, i2c->sda_fall_ns,
+ &div_low, &div_high);
WARN_ONCE(ret != 0, "Could not reach SCL freq %u", i2c->scl_frequency);
clk_enable(i2c->clk);
@@ -633,9 +665,10 @@ static int rk3x_i2c_clk_notifier_cb(struct notifier_block *nb, unsigned long
switch (event) {
case PRE_RATE_CHANGE:
if (rk3x_i2c_calc_divs(ndata->new_rate, i2c->scl_frequency,
- &div_low, &div_high) != 0) {
+ i2c->scl_rise_ns, i2c->scl_fall_ns,
+ i2c->sda_fall_ns,
+ &div_low, &div_high) != 0)
return NOTIFY_STOP;
- }
/* scale up */
if (ndata->new_rate > ndata->old_rate)
@@ -859,6 +892,24 @@ static int rk3x_i2c_probe(struct platform_device *pdev)
i2c->scl_frequency = DEFAULT_SCL_RATE;
}
+ /*
+ * Read rise and fall time from device tree. If not available use
+ * the default maximum timing from the specification.
+ */
+ if (of_property_read_u32(pdev->dev.of_node, "i2c-scl-rising-time-ns",
+ &i2c->scl_rise_ns)) {
+ if (i2c->scl_frequency <= 100000)
+ i2c->scl_rise_ns = 1000;
+ else
+ i2c->scl_rise_ns = 300;
+ }
+ if (of_property_read_u32(pdev->dev.of_node, "i2c-scl-falling-time-ns",
+ &i2c->scl_fall_ns))
+ i2c->scl_fall_ns = 300;
+ if (of_property_read_u32(pdev->dev.of_node, "i2c-sda-falling-time-ns",
+ &i2c->scl_fall_ns))
+ i2c->sda_fall_ns = i2c->scl_fall_ns;
+
strlcpy(i2c->adap.name, "rk3x-i2c", sizeof(i2c->adap.name));
i2c->adap.owner = THIS_MODULE;
i2c->adap.algo = &rk3x_i2c_algorithm;
diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index 28b87e68350..29f14331dd9 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -286,6 +286,7 @@ static int tegra_i2c_empty_rx_fifo(struct tegra_i2c_dev *i2c_dev)
if (rx_fifo_avail > 0 && buf_remaining > 0) {
BUG_ON(buf_remaining > 3);
val = i2c_readl(i2c_dev, I2C_RX_FIFO);
+ val = cpu_to_le32(val);
memcpy(buf, &val, buf_remaining);
buf_remaining = 0;
rx_fifo_avail--;
@@ -344,6 +345,7 @@ static int tegra_i2c_fill_tx_fifo(struct tegra_i2c_dev *i2c_dev)
if (tx_fifo_avail > 0 && buf_remaining > 0) {
BUG_ON(buf_remaining > 3);
memcpy(&val, buf, buf_remaining);
+ val = le32_to_cpu(val);
/* Again update before writing to FIFO to make sure isr sees. */
i2c_dev->msg_buf_remaining = 0;
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index e9eae57a2b5..210cf4874cb 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -102,7 +102,7 @@ static int acpi_i2c_add_resource(struct acpi_resource *ares, void *data)
struct acpi_resource_i2c_serialbus *sb;
sb = &ares->data.i2c_serial_bus;
- if (sb->type == ACPI_RESOURCE_SERIAL_TYPE_I2C) {
+ if (!info->addr && sb->type == ACPI_RESOURCE_SERIAL_TYPE_I2C) {
info->addr = sb->slave_address;
if (sb->access_mode == ACPI_I2C_10BIT_MODE)
info->flags |= I2C_CLIENT_TEN;
@@ -698,101 +698,6 @@ static void i2c_device_shutdown(struct device *dev)
driver->shutdown(client);
}
-#ifdef CONFIG_PM_SLEEP
-static int i2c_legacy_suspend(struct device *dev, pm_message_t mesg)
-{
- struct i2c_client *client = i2c_verify_client(dev);
- struct i2c_driver *driver;
-
- if (!client || !dev->driver)
- return 0;
- driver = to_i2c_driver(dev->driver);
- if (!driver->suspend)
- return 0;
- return driver->suspend(client, mesg);
-}
-
-static int i2c_legacy_resume(struct device *dev)
-{
- struct i2c_client *client = i2c_verify_client(dev);
- struct i2c_driver *driver;
-
- if (!client || !dev->driver)
- return 0;
- driver = to_i2c_driver(dev->driver);
- if (!driver->resume)
- return 0;
- return driver->resume(client);
-}
-
-static int i2c_device_pm_suspend(struct device *dev)
-{
- const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
-
- if (pm)
- return pm_generic_suspend(dev);
- else
- return i2c_legacy_suspend(dev, PMSG_SUSPEND);
-}
-
-static int i2c_device_pm_resume(struct device *dev)
-{
- const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
-
- if (pm)
- return pm_generic_resume(dev);
- else
- return i2c_legacy_resume(dev);
-}
-
-static int i2c_device_pm_freeze(struct device *dev)
-{
- const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
-
- if (pm)
- return pm_generic_freeze(dev);
- else
- return i2c_legacy_suspend(dev, PMSG_FREEZE);
-}
-
-static int i2c_device_pm_thaw(struct device *dev)
-{
- const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
-
- if (pm)
- return pm_generic_thaw(dev);
- else
- return i2c_legacy_resume(dev);
-}
-
-static int i2c_device_pm_poweroff(struct device *dev)
-{
- const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
-
- if (pm)
- return pm_generic_poweroff(dev);
- else
- return i2c_legacy_suspend(dev, PMSG_HIBERNATE);
-}
-
-static int i2c_device_pm_restore(struct device *dev)
-{
- const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
-
- if (pm)
- return pm_generic_restore(dev);
- else
- return i2c_legacy_resume(dev);
-}
-#else /* !CONFIG_PM_SLEEP */
-#define i2c_device_pm_suspend NULL
-#define i2c_device_pm_resume NULL
-#define i2c_device_pm_freeze NULL
-#define i2c_device_pm_thaw NULL
-#define i2c_device_pm_poweroff NULL
-#define i2c_device_pm_restore NULL
-#endif /* !CONFIG_PM_SLEEP */
-
static void i2c_client_dev_release(struct device *dev)
{
kfree(to_i2c_client(dev));
@@ -804,6 +709,7 @@ show_name(struct device *dev, struct device_attribute *attr, char *buf)
return sprintf(buf, "%s\n", dev->type == &i2c_client_type ?
to_i2c_client(dev)->name : to_i2c_adapter(dev)->name);
}
+static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
static ssize_t
show_modalias(struct device *dev, struct device_attribute *attr, char *buf)
@@ -817,8 +723,6 @@ show_modalias(struct device *dev, struct device_attribute *attr, char *buf)
return sprintf(buf, "%s%s\n", I2C_MODULE_PREFIX, client->name);
}
-
-static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
static DEVICE_ATTR(modalias, S_IRUGO, show_modalias, NULL);
static struct attribute *i2c_dev_attrs[] = {
@@ -827,29 +731,7 @@ static struct attribute *i2c_dev_attrs[] = {
&dev_attr_modalias.attr,
NULL
};
-
-static struct attribute_group i2c_dev_attr_group = {
- .attrs = i2c_dev_attrs,
-};
-
-static const struct attribute_group *i2c_dev_attr_groups[] = {
- &i2c_dev_attr_group,
- NULL
-};
-
-static const struct dev_pm_ops i2c_device_pm_ops = {
- .suspend = i2c_device_pm_suspend,
- .resume = i2c_device_pm_resume,
- .freeze = i2c_device_pm_freeze,
- .thaw = i2c_device_pm_thaw,
- .poweroff = i2c_device_pm_poweroff,
- .restore = i2c_device_pm_restore,
- SET_RUNTIME_PM_OPS(
- pm_generic_runtime_suspend,
- pm_generic_runtime_resume,
- NULL
- )
-};
+ATTRIBUTE_GROUPS(i2c_dev);
struct bus_type i2c_bus_type = {
.name = "i2c",
@@ -857,12 +739,11 @@ struct bus_type i2c_bus_type = {
.probe = i2c_device_probe,
.remove = i2c_device_remove,
.shutdown = i2c_device_shutdown,
- .pm = &i2c_device_pm_ops,
};
EXPORT_SYMBOL_GPL(i2c_bus_type);
static struct device_type i2c_client_type = {
- .groups = i2c_dev_attr_groups,
+ .groups = i2c_dev_groups,
.uevent = i2c_device_uevent,
.release = i2c_client_dev_release,
};
@@ -1261,6 +1142,7 @@ i2c_sysfs_new_device(struct device *dev, struct device_attribute *attr,
return count;
}
+static DEVICE_ATTR(new_device, S_IWUSR, NULL, i2c_sysfs_new_device);
/*
* And of course let the users delete the devices they instantiated, if
@@ -1315,8 +1197,6 @@ i2c_sysfs_delete_device(struct device *dev, struct device_attribute *attr,
"delete_device");
return res;
}
-
-static DEVICE_ATTR(new_device, S_IWUSR, NULL, i2c_sysfs_new_device);
static DEVICE_ATTR_IGNORE_LOCKDEP(delete_device, S_IWUSR, NULL,
i2c_sysfs_delete_device);
@@ -1326,18 +1206,10 @@ static struct attribute *i2c_adapter_attrs[] = {
&dev_attr_delete_device.attr,
NULL
};
-
-static struct attribute_group i2c_adapter_attr_group = {
- .attrs = i2c_adapter_attrs,
-};
-
-static const struct attribute_group *i2c_adapter_attr_groups[] = {
- &i2c_adapter_attr_group,
- NULL
-};
+ATTRIBUTE_GROUPS(i2c_adapter);
struct device_type i2c_adapter_type = {
- .groups = i2c_adapter_attr_groups,
+ .groups = i2c_adapter_groups,
.release = i2c_adapter_dev_release,
};
EXPORT_SYMBOL_GPL(i2c_adapter_type);
@@ -1419,8 +1291,6 @@ static struct i2c_client *of_i2c_register_device(struct i2c_adapter *adap,
if (of_get_property(node, "wakeup-source", NULL))
info.flags |= I2C_CLIENT_WAKE;
- request_module("%s%s", I2C_MODULE_PREFIX, info.type);
-
result = i2c_new_device(adap, &info);
if (result == NULL) {
dev_err(&adap->dev, "of_i2c: Failure registering %s\n",
@@ -1796,11 +1666,15 @@ void i2c_del_adapter(struct i2c_adapter *adap)
/* device name is gone after device_unregister */
dev_dbg(&adap->dev, "adapter [%s] unregistered\n", adap->name);
- /* clean up the sysfs representation */
+ /* wait until all references to the device are gone
+ *
+ * FIXME: This is old code and should ideally be replaced by an
+ * alternative which results in decoupling the lifetime of the struct
+ * device from the i2c_adapter, like spi or netdev do. Any solution
+ * should be throughly tested with DEBUG_KOBJECT_RELEASE enabled!
+ */
init_completion(&adap->dev_released);
device_unregister(&adap->dev);
-
- /* wait for sysfs to drop all references */
wait_for_completion(&adap->dev_released);
/* free bus id */
@@ -1859,14 +1733,6 @@ int i2c_register_driver(struct module *owner, struct i2c_driver *driver)
if (res)
return res;
- /* Drivers should switch to dev_pm_ops instead. */
- if (driver->suspend)
- pr_warn("i2c-core: driver [%s] using legacy suspend method\n",
- driver->driver.name);
- if (driver->resume)
- pr_warn("i2c-core: driver [%s] using legacy resume method\n",
- driver->driver.name);
-
pr_debug("i2c-core: driver [%s] registered\n", driver->driver.name);
INIT_LIST_HEAD(&driver->clients);
diff --git a/drivers/i2c/muxes/i2c-mux-pca954x.c b/drivers/i2c/muxes/i2c-mux-pca954x.c
index ec11b404b43..3d8f4fe2e47 100644
--- a/drivers/i2c/muxes/i2c-mux-pca954x.c
+++ b/drivers/i2c/muxes/i2c-mux-pca954x.c
@@ -41,6 +41,7 @@
#include <linux/i2c-mux.h>
#include <linux/i2c/pca954x.h>
#include <linux/module.h>
+#include <linux/of.h>
#include <linux/pm.h>
#include <linux/slab.h>
@@ -186,6 +187,8 @@ static int pca954x_probe(struct i2c_client *client,
{
struct i2c_adapter *adap = to_i2c_adapter(client->dev.parent);
struct pca954x_platform_data *pdata = dev_get_platdata(&client->dev);
+ struct device_node *of_node = client->dev.of_node;
+ bool idle_disconnect_dt;
struct gpio_desc *gpio;
int num, force, class;
struct pca954x *data;
@@ -217,8 +220,13 @@ static int pca954x_probe(struct i2c_client *client,
data->type = id->driver_data;
data->last_chan = 0; /* force the first selection */
+ idle_disconnect_dt = of_node &&
+ of_property_read_bool(of_node, "i2c-mux-idle-disconnect");
+
/* Now create an adapter for each channel */
for (num = 0; num < chips[data->type].nchans; num++) {
+ bool idle_disconnect_pd = false;
+
force = 0; /* dynamic adap number */
class = 0; /* no class by default */
if (pdata) {
@@ -229,12 +237,13 @@ static int pca954x_probe(struct i2c_client *client,
} else
/* discard unconfigured channels */
break;
+ idle_disconnect_pd = pdata->modes[num].deselect_on_exit;
}
data->virt_adaps[num] =
i2c_add_mux_adapter(adap, &client->dev, client,
force, num, class, pca954x_select_chan,
- (pdata && pdata->modes[num].deselect_on_exit)
+ (idle_disconnect_pd || idle_disconnect_dt)
? pca954x_deselect_mux : NULL);
if (data->virt_adaps[num] == NULL) {
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-14 07:56:28 +0000