summaryrefslogtreecommitdiffstats
path: root/drivers/i2c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/i2c')
-rw-r--r--drivers/i2c/Kconfig15
-rw-r--r--drivers/i2c/Makefile2
-rw-r--r--drivers/i2c/busses/i2c-at91.c32
-rw-r--r--drivers/i2c/busses/i2c-i801.c2
-rw-r--r--drivers/i2c/busses/i2c-mv64xxx.c3
-rw-r--r--drivers/i2c/busses/i2c-rcar.c37
-rw-r--r--drivers/i2c/busses/i2c-rk3x.c4
-rw-r--r--drivers/i2c/i2c-acpi.c2
8 files changed, 73 insertions, 24 deletions
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index 3e3b680dc00..b51a402752c 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -23,17 +23,14 @@ config I2C
This I2C support can also be built as a module. If so, the module
will be called i2c-core.
-config I2C_ACPI
- bool "I2C ACPI support"
- select I2C
- depends on ACPI
+config ACPI_I2C_OPREGION
+ bool "ACPI I2C Operation region support"
+ depends on I2C=y && ACPI
default y
help
- Say Y here if you want to enable ACPI I2C support. This includes support
- for automatic enumeration of I2C slave devices and support for ACPI I2C
- Operation Regions. Operation Regions allow firmware (BIOS) code to
- access I2C slave devices, such as smart batteries through an I2C host
- controller driver.
+ Say Y here if you want to enable ACPI I2C operation region support.
+ Operation Regions allow firmware (BIOS) code to access I2C slave devices,
+ such as smart batteries through an I2C host controller driver.
if I2C
diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
index a1f590cbb43..e0228b22825 100644
--- a/drivers/i2c/Makefile
+++ b/drivers/i2c/Makefile
@@ -3,7 +3,7 @@
#
i2ccore-y := i2c-core.o
-i2ccore-$(CONFIG_I2C_ACPI) += i2c-acpi.o
+i2ccore-$(CONFIG_ACPI) += i2c-acpi.o
obj-$(CONFIG_I2C_BOARDINFO) += i2c-boardinfo.o
obj-$(CONFIG_I2C) += i2ccore.o
diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c
index 79a68999a69..917d54588d9 100644
--- a/drivers/i2c/busses/i2c-at91.c
+++ b/drivers/i2c/busses/i2c-at91.c
@@ -101,6 +101,7 @@ struct at91_twi_dev {
unsigned twi_cwgr_reg;
struct at91_twi_pdata *pdata;
bool use_dma;
+ bool recv_len_abort;
struct at91_twi_dma dma;
};
@@ -267,12 +268,24 @@ static void at91_twi_read_next_byte(struct at91_twi_dev *dev)
*dev->buf = at91_twi_read(dev, AT91_TWI_RHR) & 0xff;
--dev->buf_len;
+ /* return if aborting, we only needed to read RHR to clear RXRDY*/
+ if (dev->recv_len_abort)
+ return;
+
/* handle I2C_SMBUS_BLOCK_DATA */
if (unlikely(dev->msg->flags & I2C_M_RECV_LEN)) {
- dev->msg->flags &= ~I2C_M_RECV_LEN;
- dev->buf_len += *dev->buf;
- dev->msg->len = dev->buf_len + 1;
- dev_dbg(dev->dev, "received block length %d\n", dev->buf_len);
+ /* ensure length byte is a valid value */
+ if (*dev->buf <= I2C_SMBUS_BLOCK_MAX && *dev->buf > 0) {
+ dev->msg->flags &= ~I2C_M_RECV_LEN;
+ dev->buf_len += *dev->buf;
+ dev->msg->len = dev->buf_len + 1;
+ dev_dbg(dev->dev, "received block length %d\n",
+ dev->buf_len);
+ } else {
+ /* abort and send the stop by reading one more byte */
+ dev->recv_len_abort = true;
+ dev->buf_len = 1;
+ }
}
/* send stop if second but last byte has been read */
@@ -421,8 +434,8 @@ static int at91_do_twi_transfer(struct at91_twi_dev *dev)
}
}
- ret = wait_for_completion_interruptible_timeout(&dev->cmd_complete,
- dev->adapter.timeout);
+ ret = wait_for_completion_io_timeout(&dev->cmd_complete,
+ dev->adapter.timeout);
if (ret == 0) {
dev_err(dev->dev, "controller timed out\n");
at91_init_twi_bus(dev);
@@ -444,6 +457,12 @@ static int at91_do_twi_transfer(struct at91_twi_dev *dev)
ret = -EIO;
goto error;
}
+ if (dev->recv_len_abort) {
+ dev_err(dev->dev, "invalid smbus block length recvd\n");
+ ret = -EPROTO;
+ goto error;
+ }
+
dev_dbg(dev->dev, "transfer complete\n");
return 0;
@@ -500,6 +519,7 @@ static int at91_twi_xfer(struct i2c_adapter *adap, struct i2c_msg *msg, int num)
dev->buf_len = m_start->len;
dev->buf = m_start->buf;
dev->msg = m_start;
+ dev->recv_len_abort = false;
ret = at91_do_twi_transfer(dev);
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 2994690b26e..10467a32774 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -164,6 +164,7 @@
/* Older devices have their ID defined in <linux/pci_ids.h> */
#define PCI_DEVICE_ID_INTEL_BAYTRAIL_SMBUS 0x0f12
+#define PCI_DEVICE_ID_INTEL_BRASWELL_SMBUS 0x2292
#define PCI_DEVICE_ID_INTEL_COUGARPOINT_SMBUS 0x1c22
#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS 0x1d22
/* Patsburg also has three 'Integrated Device Function' SMBus controllers */
@@ -828,6 +829,7 @@ static const struct pci_device_id i801_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WILDCATPOINT_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BAYTRAIL_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BRASWELL_SMBUS) },
{ 0, }
};
diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c
index 6dc5ded86f6..2f64273d3f2 100644
--- a/drivers/i2c/busses/i2c-mv64xxx.c
+++ b/drivers/i2c/busses/i2c-mv64xxx.c
@@ -746,8 +746,7 @@ mv64xxx_of_config(struct mv64xxx_i2c_data *drv_data,
}
tclk = clk_get_rate(drv_data->clk);
- rc = of_property_read_u32(np, "clock-frequency", &bus_freq);
- if (rc)
+ if (of_property_read_u32(np, "clock-frequency", &bus_freq))
bus_freq = 100000; /* 100kHz by default */
if (!mv64xxx_find_baud_factors(bus_freq, tclk,
diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c
index f3c7139dfa2..1cc146cfc1f 100644
--- a/drivers/i2c/busses/i2c-rcar.c
+++ b/drivers/i2c/busses/i2c-rcar.c
@@ -34,6 +34,7 @@
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/slab.h>
+#include <linux/spinlock.h>
/* register offsets */
#define ICSCR 0x00 /* slave ctrl */
@@ -95,6 +96,7 @@ struct rcar_i2c_priv {
struct i2c_msg *msg;
struct clk *clk;
+ spinlock_t lock;
wait_queue_head_t wait;
int pos;
@@ -365,20 +367,20 @@ static irqreturn_t rcar_i2c_irq(int irq, void *ptr)
struct rcar_i2c_priv *priv = ptr;
u32 msr;
+ /*-------------- spin lock -----------------*/
+ spin_lock(&priv->lock);
+
msr = rcar_i2c_read(priv, ICMSR);
+ /* Only handle interrupts that are currently enabled */
+ msr &= rcar_i2c_read(priv, ICMIER);
+
/* Arbitration lost */
if (msr & MAL) {
rcar_i2c_flags_set(priv, (ID_DONE | ID_ARBLOST));
goto out;
}
- /* Stop */
- if (msr & MST) {
- rcar_i2c_flags_set(priv, ID_DONE);
- goto out;
- }
-
/* Nack */
if (msr & MNR) {
/* go to stop phase */
@@ -388,6 +390,12 @@ static irqreturn_t rcar_i2c_irq(int irq, void *ptr)
goto out;
}
+ /* Stop */
+ if (msr & MST) {
+ rcar_i2c_flags_set(priv, ID_DONE);
+ goto out;
+ }
+
if (rcar_i2c_is_recv(priv))
rcar_i2c_flags_set(priv, rcar_i2c_irq_recv(priv, msr));
else
@@ -400,6 +408,9 @@ out:
wake_up(&priv->wait);
}
+ spin_unlock(&priv->lock);
+ /*-------------- spin unlock -----------------*/
+
return IRQ_HANDLED;
}
@@ -409,14 +420,21 @@ static int rcar_i2c_master_xfer(struct i2c_adapter *adap,
{
struct rcar_i2c_priv *priv = i2c_get_adapdata(adap);
struct device *dev = rcar_i2c_priv_to_dev(priv);
+ unsigned long flags;
int i, ret, timeout;
pm_runtime_get_sync(dev);
+ /*-------------- spin lock -----------------*/
+ spin_lock_irqsave(&priv->lock, flags);
+
rcar_i2c_init(priv);
/* start clock */
rcar_i2c_write(priv, ICCCR, priv->icccr);
+ spin_unlock_irqrestore(&priv->lock, flags);
+ /*-------------- spin unlock -----------------*/
+
ret = rcar_i2c_bus_barrier(priv);
if (ret < 0)
goto out;
@@ -428,6 +446,9 @@ static int rcar_i2c_master_xfer(struct i2c_adapter *adap,
break;
}
+ /*-------------- spin lock -----------------*/
+ spin_lock_irqsave(&priv->lock, flags);
+
/* init each data */
priv->msg = &msgs[i];
priv->pos = 0;
@@ -437,6 +458,9 @@ static int rcar_i2c_master_xfer(struct i2c_adapter *adap,
ret = rcar_i2c_prepare_msg(priv);
+ spin_unlock_irqrestore(&priv->lock, flags);
+ /*-------------- spin unlock -----------------*/
+
if (ret < 0)
break;
@@ -540,6 +564,7 @@ static int rcar_i2c_probe(struct platform_device *pdev)
irq = platform_get_irq(pdev, 0);
init_waitqueue_head(&priv->wait);
+ spin_lock_init(&priv->lock);
adap = &priv->adap;
adap->nr = pdev->id;
diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c
index 69e11853e8b..e637c32ae51 100644
--- a/drivers/i2c/busses/i2c-rk3x.c
+++ b/drivers/i2c/busses/i2c-rk3x.c
@@ -323,6 +323,10 @@ static void rk3x_i2c_handle_read(struct rk3x_i2c *i2c, unsigned int ipd)
/* ack interrupt */
i2c_writel(i2c, REG_INT_MBRF, REG_IPD);
+ /* Can only handle a maximum of 32 bytes at a time */
+ if (len > 32)
+ len = 32;
+
/* read the data from receive buffer */
for (i = 0; i < len; ++i) {
if (i % 4 == 0)
diff --git a/drivers/i2c/i2c-acpi.c b/drivers/i2c/i2c-acpi.c
index e8b61967334..0dbc18c15c4 100644
--- a/drivers/i2c/i2c-acpi.c
+++ b/drivers/i2c/i2c-acpi.c
@@ -126,6 +126,7 @@ void acpi_i2c_register_devices(struct i2c_adapter *adap)
dev_warn(&adap->dev, "failed to enumerate I2C slaves\n");
}
+#ifdef CONFIG_ACPI_I2C_OPREGION
static int acpi_gsb_i2c_read_bytes(struct i2c_client *client,
u8 cmd, u8 *data, u8 data_len)
{
@@ -360,3 +361,4 @@ void acpi_i2c_remove_space_handler(struct i2c_adapter *adapter)
acpi_bus_detach_private_data(handle);
}
+#endif
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-03-23 18:55:15 +0000