diff options
Diffstat (limited to 'drivers/ide/Kconfig')
| -rw-r--r-- | drivers/ide/Kconfig | 30 |
1 files changed, 15 insertions, 15 deletions
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index df752e690e4..eed6d8e1b5c 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -50,7 +50,7 @@ menuconfig IDE To compile this driver as a module, choose M here: the module will be called ide. - For further information, please read <file:Documentation/ide.txt>. + For further information, please read <file:Documentation/ide/ide.txt>. If unsure, say Y. @@ -77,7 +77,7 @@ config BLK_DEV_IDE Useful information about large (>540 MB) IDE disks, multiple interfaces, what to do if ATA/IDE devices are not automatically detected, sound card ATA/IDE ports, module support, and other - topics, is contained in <file:Documentation/ide.txt>. For detailed + topics, is contained in <file:Documentation/ide/ide.txt>. For detailed information about hard drives, consult the Disk-HOWTO and the Multi-Disk-HOWTO, available from <http://www.tldp.org/docs.html#howto>. @@ -87,7 +87,7 @@ config BLK_DEV_IDE <ftp://ibiblio.org/pub/Linux/system/hardware/>. To compile this driver as a module, choose M here and read - <file:Documentation/ide.txt>. The module will be called ide-mod. + <file:Documentation/ide/ide.txt>. The module will be called ide-mod. Do not compile this driver as a module if your root file system (the one containing the directory /) is located on an IDE device. @@ -98,7 +98,7 @@ config BLK_DEV_IDE if BLK_DEV_IDE -comment "Please see Documentation/ide.txt for help/info on IDE drives" +comment "Please see Documentation/ide/ide.txt for help/info on IDE drives" config BLK_DEV_IDE_SATA bool "Support for SATA (deprecated; conflicts with libata SATA driver)" @@ -235,8 +235,8 @@ config BLK_DEV_IDETAPE along with other IDE devices, as "hdb" or "hdc", or something similar, and will be mapped to a character device such as "ht0" (check the boot messages with dmesg). Be sure to consult the - <file:drivers/ide/ide-tape.c> and <file:Documentation/ide.txt> files - for usage information. + <file:drivers/ide/ide-tape.c> and <file:Documentation/ide/ide.txt> + files for usage information. To compile this driver as a module, choose M here: the module will be called ide-tape. @@ -358,7 +358,7 @@ config BLK_DEV_CMD640 The CMD640 chip is also used on add-in cards by Acculogic, and on the "CSA-6400E PCI to IDE controller" that some people have. For - details, read <file:Documentation/ide.txt>. + details, read <file:Documentation/ide/ide.txt>. config BLK_DEV_CMD640_ENHANCED bool "CMD640 enhanced support" @@ -366,7 +366,7 @@ config BLK_DEV_CMD640_ENHANCED help This option includes support for setting/autotuning PIO modes and prefetch on CMD640 IDE interfaces. For details, read - <file:Documentation/ide.txt>. If you have a CMD640 IDE interface + <file:Documentation/ide/ide.txt>. If you have a CMD640 IDE interface and your BIOS does not already do this for you, then say Y here. Otherwise say N. @@ -1069,9 +1069,9 @@ config BLK_DEV_ALI14XX This driver is enabled at runtime using the "ali14xx.probe" kernel boot parameter. It enables support for the secondary IDE interface of the ALI M1439/1443/1445/1487/1489 chipsets, and permits faster - I/O speeds to be set as well. See the files - <file:Documentation/ide.txt> and <file:drivers/ide/legacy/ali14xx.c> - for more info. + I/O speeds to be set as well. + See the files <file:Documentation/ide/ide.txt> and + <file:drivers/ide/legacy/ali14xx.c> for more info. config BLK_DEV_DTC2278 tristate "DTC-2278 support" @@ -1079,7 +1079,7 @@ config BLK_DEV_DTC2278 This driver is enabled at runtime using the "dtc2278.probe" kernel boot parameter. It enables support for the secondary IDE interface of the DTC-2278 card, and permits faster I/O speeds to be set as - well. See the <file:Documentation/ide.txt> and + well. See the <file:Documentation/ide/ide.txt> and <file:drivers/ide/legacy/dtc2278.c> files for more info. config BLK_DEV_HT6560B @@ -1088,7 +1088,7 @@ config BLK_DEV_HT6560B This driver is enabled at runtime using the "ht6560b.probe" kernel boot parameter. It enables support for the secondary IDE interface of the Holtek card, and permits faster I/O speeds to be set as well. - See the <file:Documentation/ide.txt> and + See the <file:Documentation/ide/ide.txt> and <file:drivers/ide/legacy/ht6560b.c> files for more info. config BLK_DEV_QD65XX @@ -1096,7 +1096,7 @@ config BLK_DEV_QD65XX help This driver is enabled at runtime using the "qd65xx.probe" kernel boot parameter. It permits faster I/O speeds to be set. See the - <file:Documentation/ide.txt> and <file:drivers/ide/legacy/qd65xx.c> + <file:Documentation/ide/ide.txt> and <file:drivers/ide/legacy/qd65xx.c> for more info. config BLK_DEV_UMC8672 @@ -1105,7 +1105,7 @@ config BLK_DEV_UMC8672 This driver is enabled at runtime using the "umc8672.probe" kernel boot parameter. It enables support for the secondary IDE interface of the UMC-8672, and permits faster I/O speeds to be set as well. - See the files <file:Documentation/ide.txt> and + See the files <file:Documentation/ide/ide.txt> and <file:drivers/ide/legacy/umc8672.c> for more info. endif |