diff options
Diffstat (limited to 'drivers/ide/cris/ide-cris.c')
| -rw-r--r-- | drivers/ide/cris/ide-cris.c | 18 |
1 files changed, 9 insertions, 9 deletions
diff --git a/drivers/ide/cris/ide-cris.c b/drivers/ide/cris/ide-cris.c index a62ca75c7e2..9df26855bc0 100644 --- a/drivers/ide/cris/ide-cris.c +++ b/drivers/ide/cris/ide-cris.c @@ -88,8 +88,8 @@ enum /* Transfer types */ int cris_ide_ack_intr(ide_hwif_t* hwif) { - reg_ata_rw_ctrl2 ctrl2 = REG_TYPE_CONV(reg_ata_rw_ctrl2, - int, hwif->io_ports[0]); + reg_ata_rw_ctrl2 ctrl2 = REG_TYPE_CONV(reg_ata_rw_ctrl2, int, + hwif->io_ports.data_addr); REG_WR_INT(ata, regi_ata, rw_ack_intr, 1 << ctrl2.sel); return 1; } @@ -231,7 +231,7 @@ cris_ide_start_dma(ide_drive_t *drive, cris_dma_descr_type *d, int dir,int type, ide_hwif_t *hwif = drive->hwif; reg_ata_rw_ctrl2 ctrl2 = REG_TYPE_CONV(reg_ata_rw_ctrl2, int, - hwif->io_ports[IDE_DATA_OFFSET]); + hwif->io_ports.data_addr); reg_ata_rw_trf_cnt trf_cnt = {0}; mycontext.saved_data = (dma_descr_data*)virt_to_phys(d); @@ -271,7 +271,7 @@ static int cris_dma_test_irq(ide_drive_t *drive) int intr = REG_RD_INT(ata, regi_ata, r_intr); reg_ata_rw_ctrl2 ctrl2 = REG_TYPE_CONV(reg_ata_rw_ctrl2, int, - hwif->io_ports[IDE_DATA_OFFSET]); + hwif->io_ports.data_addr); return intr & (1 << ctrl2.sel) ? 1 : 0; } @@ -531,7 +531,7 @@ static void cris_ide_start_dma(ide_drive_t *drive, cris_dma_descr_type *d, int d *R_ATA_CTRL_DATA = cmd | IO_FIELD(R_ATA_CTRL_DATA, data, - drive->hwif->io_ports[IDE_DATA_OFFSET]) | + drive->hwif->io_ports.data_addr) | IO_STATE(R_ATA_CTRL_DATA, src_dst, dma) | IO_STATE(R_ATA_CTRL_DATA, multi, on) | IO_STATE(R_ATA_CTRL_DATA, dma_size, word); @@ -550,7 +550,7 @@ static int cris_dma_test_irq(ide_drive_t *drive) { int intr = *R_IRQ_MASK0_RD; int bus = IO_EXTRACT(R_ATA_CTRL_DATA, sel, - drive->hwif->io_ports[IDE_DATA_OFFSET]); + drive->hwif->io_ports.data_addr); return intr & (1 << (bus + IO_BITNR(R_IRQ_MASK0_RD, ata_irq0))) ? 1 : 0; } @@ -644,7 +644,7 @@ cris_ide_inw(unsigned long reg) { * call will also timeout on busy, but as long as the * write is still performed, everything will be fine. */ - if (cris_ide_get_reg(reg) == IDE_STATUS_OFFSET) + if (cris_ide_get_reg(reg) == 7) return BUSY_STAT; else /* For other rare cases we assume 0 is good enough. */ @@ -765,13 +765,13 @@ static void __init cris_setup_ports(hw_regs_t *hw, unsigned long base) memset(hw, 0, sizeof(*hw)); for (i = 0; i <= 7; i++) - hw->io_ports[i] = base + cris_ide_reg_addr(i, 0, 1); + hw->io_ports_array[i] = base + cris_ide_reg_addr(i, 0, 1); /* * the IDE control register is at ATA address 6, * with CS1 active instead of CS0 */ - hw->io_ports[IDE_CONTROL_OFFSET] = base + cris_ide_reg_addr(6, 1, 0); + hw->io_ports.ctl_addr = base + cris_ide_reg_addr(6, 1, 0); hw->irq = ide_default_irq(0); hw->ack_intr = cris_ide_ack_intr; |