diff options
Diffstat (limited to 'drivers/ide/ide-cd.c')
| -rw-r--r-- | drivers/ide/ide-cd.c | 401 |
1 files changed, 191 insertions, 210 deletions
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 90714494c79..cc9e7f40d2e 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -39,7 +39,8 @@ #include <linux/mutex.h> #include <linux/bcd.h> -#include <scsi/scsi.h> /* For SCSI -> ATAPI command conversion */ +/* For SCSI -> ATAPI command conversion */ +#include <scsi/scsi.h> #include <linux/irq.h> #include <linux/io.h> @@ -77,12 +78,11 @@ static void ide_cd_put(struct cdrom_info *cd) mutex_unlock(&idecd_ref_mutex); } -/**************************************************************************** +/* * Generic packet command support and error handling routines. */ -/* Mark that we've seen a media change, and invalidate our internal - buffers. */ +/* Mark that we've seen a media change and invalidate our internal buffers. */ static void cdrom_saw_media_change(ide_drive_t *drive) { struct cdrom_info *cd = drive->driver_data; @@ -105,9 +105,8 @@ static int cdrom_log_sense(ide_drive_t *drive, struct request *rq, break; case NOT_READY: /* - * don't care about tray state messages for - * e.g. capacity commands or in-progress or - * becoming ready + * don't care about tray state messages for e.g. capacity + * commands or in-progress or becoming ready */ if (sense->asc == 0x3a || sense->asc == 0x04) break; @@ -115,8 +114,8 @@ static int cdrom_log_sense(ide_drive_t *drive, struct request *rq, break; case ILLEGAL_REQUEST: /* - * don't log START_STOP unit with LoEj set, since - * we cannot reliably check if drive can auto-close + * don't log START_STOP unit with LoEj set, since we cannot + * reliably check if drive can auto-close */ if (rq->cmd[0] == GPCMD_START_STOP_UNIT && sense->asc == 0x24) break; @@ -124,9 +123,9 @@ static int cdrom_log_sense(ide_drive_t *drive, struct request *rq, break; case UNIT_ATTENTION: /* - * Make good and sure we've seen this potential media - * change. Some drives (i.e. Creative) fail to present - * the correct sense key in the error register. + * Make good and sure we've seen this potential media change. + * Some drives (i.e. Creative) fail to present the correct sense + * key in the error register. */ cdrom_saw_media_change(drive); break; @@ -151,15 +150,16 @@ void cdrom_analyze_sense_data(ide_drive_t *drive, return; /* - * If a read toc is executed for a CD-R or CD-RW medium where - * the first toc has not been recorded yet, it will fail with - * 05/24/00 (which is a confusing error) + * If a read toc is executed for a CD-R or CD-RW medium where the first + * toc has not been recorded yet, it will fail with 05/24/00 (which is a + * confusing error) */ if (failed_command && failed_command->cmd[0] == GPCMD_READ_TOC_PMA_ATIP) if (sense->sense_key == 0x05 && sense->asc == 0x24) return; - if (sense->error_code == 0x70) { /* Current Error */ + /* current error */ + if (sense->error_code == 0x70) { switch (sense->sense_key) { case MEDIUM_ERROR: case VOLUME_OVERFLOW: @@ -178,7 +178,8 @@ void cdrom_analyze_sense_data(ide_drive_t *drive, if (bio_sectors < 4) bio_sectors = 4; if (drive->queue->hardsect_size == 2048) - sector <<= 2; /* Device sector size is 2K */ + /* device sector size is 2K */ + sector <<= 2; sector &= ~(bio_sectors - 1); valid = (sector - failed_command->sector) << 9; @@ -194,9 +195,7 @@ void cdrom_analyze_sense_data(ide_drive_t *drive, ide_cd_log_error(drive->name, failed_command, sense); } -/* - * Initialize a ide-cd packet command request - */ +/* Initialize a ide-cd packet command request */ void ide_cd_init_rq(ide_drive_t *drive, struct request *rq) { struct cdrom_info *cd = drive->driver_data; @@ -252,7 +251,7 @@ static void cdrom_end_request(ide_drive_t *drive, int uptodate) } cdrom_analyze_sense_data(drive, failed, sense); /* - * now end failed request + * now end the failed request */ if (blk_fs_request(failed)) { if (ide_end_dequeued_request(drive, failed, 0, @@ -287,14 +286,17 @@ static void ide_dump_status_no_sense(ide_drive_t *drive, const char *msg, u8 sta ide_dump_status(drive, msg, stat); } -/* Returns 0 if the request should be continued. - Returns 1 if the request was ended. */ +/* + * Returns: + * 0: if the request should be continued. + * 1: if the request was ended. + */ static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret) { struct request *rq = HWGROUP(drive)->rq; int stat, err, sense_key; - /* Check for errors. */ + /* check for errors */ stat = ide_read_status(drive); if (stat_ret) @@ -303,7 +305,7 @@ static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret) if (OK_STAT(stat, good_stat, BAD_R_STAT)) return 0; - /* Get the IDE error register. */ + /* get the IDE error register */ err = ide_read_error(drive); sense_key = err >> 4; @@ -313,10 +315,11 @@ static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret) } if (blk_sense_request(rq)) { - /* We got an error trying to get sense info - from the drive (probably while trying - to recover from a former error). Just give up. */ - + /* + * We got an error trying to get sense info from the drive + * (probably while trying to recover from a former error). + * Just give up. + */ rq->cmd_flags |= REQ_FAILED; cdrom_end_request(drive, 0); ide_error(drive, "request sense failure", stat); @@ -332,13 +335,12 @@ static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret) if (blk_pc_request(rq) && !rq->errors) rq->errors = SAM_STAT_CHECK_CONDITION; - /* Check for tray open. */ + /* check for tray open */ if (sense_key == NOT_READY) { cdrom_saw_media_change(drive); } else if (sense_key == UNIT_ATTENTION) { - /* Check for media change. */ + /* check for media change */ cdrom_saw_media_change(drive); - /*printk("%s: media changed\n",drive->name);*/ return 0; } else if (sense_key == ILLEGAL_REQUEST && rq->cmd[0] == GPCMD_START_STOP_UNIT) { @@ -350,7 +352,7 @@ static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret) * cdrom_log_sense() knows this! */ } else if (!(rq->cmd_flags & REQ_QUIET)) { - /* Otherwise, print an error. */ + /* otherwise, print an error */ ide_dump_status(drive, "packet command error", stat); } @@ -366,25 +368,27 @@ static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret) } else if (blk_fs_request(rq)) { int do_end_request = 0; - /* Handle errors from READ and WRITE requests. */ + /* handle errors from READ and WRITE requests */ if (blk_noretry_request(rq)) do_end_request = 1; if (sense_key == NOT_READY) { - /* Tray open. */ + /* tray open */ if (rq_data_dir(rq) == READ) { cdrom_saw_media_change(drive); - /* Fail the request. */ + /* fail the request */ printk("%s: tray open\n", drive->name); do_end_request = 1; } else { struct cdrom_info *info = drive->driver_data; - /* allow the drive 5 seconds to recover, some + /* + * Allow the drive 5 seconds to recover, some * devices will return this error while flushing - * data from cache */ + * data from cache. + */ if (!rq->errors) info->write_timeout = jiffies + ATAPI_WAIT_WRITE_BUSY; rq->errors = 1; @@ -394,8 +398,8 @@ static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret) unsigned long flags; /* - * take a breather relying on the - * unplug timer to kick us again + * take a breather relying on the unplug + * timer to kick us again */ spin_lock_irqsave(&ide_lock, flags); blk_plug_device(drive->queue); @@ -404,55 +408,54 @@ static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret) } } } else if (sense_key == UNIT_ATTENTION) { - /* Media change. */ + /* media change */ cdrom_saw_media_change (drive); /* - * Arrange to retry the request. - * But be sure to give up if we've retried - * too many times. + * Arrange to retry the request but be sure to give up + * if we've retried too many times. */ if (++rq->errors > ERROR_MAX) do_end_request = 1; } else if (sense_key == ILLEGAL_REQUEST || sense_key == DATA_PROTECT) { /* - * No point in retrying after an illegal - * request or data protect error. + * No point in retrying after an illegal request or data + * protect error. */ ide_dump_status_no_sense(drive, "command error", stat); do_end_request = 1; } else if (sense_key == MEDIUM_ERROR) { /* * No point in re-trying a zillion times on a bad - * sector... If we got here the error is not correctable + * sector. If we got here the error is not correctable. */ ide_dump_status_no_sense(drive, "media error (bad sector)", stat); do_end_request = 1; } else if (sense_key == BLANK_CHECK) { - /* Disk appears blank ?? */ + /* disk appears blank ?? */ ide_dump_status_no_sense(drive, "media error (blank)", stat); do_end_request = 1; } else if ((err & ~ABRT_ERR) != 0) { - /* Go to the default handler - for other errors. */ + /* go to the default handler for other errors */ ide_error(drive, "cdrom_decode_status", stat); return 1; } else if ((++rq->errors > ERROR_MAX)) { - /* We've racked up too many retries. Abort. */ + /* we've racked up too many retries, abort */ do_end_request = 1; } - /* End a request through request sense analysis when we have - sense data. We need this in order to perform end of media - processing */ - + /* + * End a request through request sense analysis when we have + * sense data. We need this in order to perform end of media + * processing. + */ if (do_end_request) goto end_request; /* - * If we got a CHECK_CONDITION status, - * queue a request sense command. + * If we got a CHECK_CONDITION status, queue + * a request sense command. */ if (stat & ERR_STAT) cdrom_queue_request_sense(drive, NULL, NULL); @@ -461,7 +464,7 @@ static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret) cdrom_end_request(drive, 0); } - /* Retry, or handle the next request. */ + /* retry, or handle the next request */ return 1; end_request: @@ -486,10 +489,10 @@ static int cdrom_timer_expiry(ide_drive_t *drive) unsigned long wait = 0; /* - * Some commands are *slow* and normally take a long time to - * complete. Usually we can use the ATAPI "disconnect" to bypass - * this, but not all commands/drives support that. Let - * ide_timer_expiry keep polling us for these. + * Some commands are *slow* and normally take a long time to complete. + * Usually we can use the ATAPI "disconnect" to bypass this, but not all + * commands/drives support that. Let ide_timer_expiry keep polling us + * for these. */ switch (rq->cmd[0]) { case GPCMD_BLANK: @@ -508,13 +511,14 @@ static int cdrom_timer_expiry(ide_drive_t *drive) return wait; } -/* Set up the device registers for transferring a packet command on DEV, - expecting to later transfer XFERLEN bytes. HANDLER is the routine - which actually transfers the command to the drive. If this is a - drq_interrupt device, this routine will arrange for HANDLER to be - called when the interrupt from the drive arrives. Otherwise, HANDLER - will be called immediately after the drive is prepared for the transfer. */ - +/* + * Set up the device registers for transferring a packet command on DEV, + * expecting to later transfer XFERLEN bytes. HANDLER is the routine + * which actually transfers the command to the drive. If this is a + * drq_interrupt device, this routine will arrange for HANDLER to be + * called when the interrupt from the drive arrives. Otherwise, HANDLER + * will be called immediately after the drive is prepared for the transfer. + */ static ide_startstop_t cdrom_start_packet_command(ide_drive_t *drive, int xferlen, ide_handler_t *handler) @@ -523,7 +527,7 @@ static ide_startstop_t cdrom_start_packet_command(ide_drive_t *drive, struct cdrom_info *info = drive->driver_data; ide_hwif_t *hwif = drive->hwif; - /* Wait for the controller to be idle. */ + /* wait for the controller to be idle */ if (ide_wait_stat(&startstop, drive, 0, BUSY_STAT, WAIT_READY)) return startstop; @@ -531,7 +535,7 @@ static ide_startstop_t cdrom_start_packet_command(ide_drive_t *drive, if (info->dma) info->dma = !hwif->dma_setup(drive); - /* Set up the controller registers. */ + /* set up the controller registers */ ide_pktcmd_tf_load(drive, IDE_TFLAG_OUT_NSECT | IDE_TFLAG_OUT_LBAL | IDE_TFLAG_NO_SELECT_MASK, xferlen, info->dma); @@ -557,11 +561,12 @@ static ide_startstop_t cdrom_start_packet_command(ide_drive_t *drive, } } -/* Send a packet command to DRIVE described by CMD_BUF and CMD_LEN. - The device registers must have already been prepared - by cdrom_start_packet_command. - HANDLER is the interrupt handler to call when the command completes - or there's data ready. */ +/* + * Send a packet command to DRIVE described by CMD_BUF and CMD_LEN. The device + * registers must have already been prepared by cdrom_start_packet_command. + * HANDLER is the interrupt handler to call when the command completes or + * there's data ready. + */ #define ATAPI_MIN_CDB_BYTES 12 static ide_startstop_t cdrom_transfer_packet_command(ide_drive_t *drive, struct request *rq, @@ -573,24 +578,26 @@ static ide_startstop_t cdrom_transfer_packet_command(ide_drive_t *drive, ide_startstop_t startstop; if (info->cd_flags & IDE_CD_FLAG_DRQ_INTERRUPT) { - /* Here we should have been called after receiving an interrupt - from the device. DRQ should how be set. */ + /* + * Here we should have been called after receiving an interrupt + * from the device. DRQ should how be set. + */ - /* Check for errors. */ + /* check for errors */ if (cdrom_decode_status(drive, DRQ_STAT, NULL)) return ide_stopped; - /* Ok, next interrupt will be DMA interrupt. */ + /* ok, next interrupt will be DMA interrupt */ if (info->dma) drive->waiting_for_dma = 1; } else { - /* Otherwise, we must wait for DRQ to get set. */ + /* otherwise, we must wait for DRQ to get set */ if (ide_wait_stat(&startstop, drive, DRQ_STAT, BUSY_STAT, WAIT_READY)) return startstop; } - /* Arm the interrupt handler. */ + /* arm the interrupt handler */ ide_set_handler(drive, handler, rq->timeout, cdrom_timer_expiry); /* ATAPI commands get padded out to 12 bytes minimum */ @@ -598,20 +605,19 @@ static ide_startstop_t cdrom_transfer_packet_command(ide_drive_t *drive, if (cmd_len < ATAPI_MIN_CDB_BYTES) cmd_len = ATAPI_MIN_CDB_BYTES; - /* Send the command to the device. */ + /* send the command to the device */ HWIF(drive)->atapi_output_bytes(drive, rq->cmd, cmd_len); - /* Start the DMA if need be */ + /* start the DMA if need be */ if (info->dma) hwif->dma_start(drive); return ide_started; } -/**************************************************************************** +/* * Block read functions. */ - static void ide_cd_pad_transfer(ide_drive_t *drive, xfer_func_t *xf, int len) { while (len > 0) { @@ -649,20 +655,21 @@ static int ide_cd_check_ireason(ide_drive_t *drive, struct request *rq, ide_hwif_t *hwif = drive->hwif; xfer_func_t *xf; - /* Whoops... */ + /* whoops... */ printk(KERN_ERR "%s: %s: wrong transfer direction!\n", drive->name, __func__); xf = rw ? hwif->atapi_output_bytes : hwif->atapi_input_bytes; ide_cd_pad_transfer(drive, xf, len); } else if (rw == 0 && ireason == 1) { - /* Some drives (ASUS) seem to tell us that status - * info is available. just get it and ignore. + /* + * Some drives (ASUS) seem to tell us that status info is + * available. Just get it and ignore. */ (void)ide_read_status(drive); return 0; } else { - /* Drive wants a command packet, or invalid ireason... */ + /* drive wants a command packet, or invalid ireason... */ printk(KERN_ERR "%s: %s: bad interrupt reason 0x%02x\n", drive->name, __func__, ireason); } @@ -702,10 +709,10 @@ static int ide_cd_check_transfer_size(ide_drive_t *drive, int len) static ide_startstop_t cdrom_newpc_intr(ide_drive_t *); /* - * Routine to send a read/write packet command to the drive. - * This is usually called directly from cdrom_start_{read,write}(). - * However, for drq_interrupt devices, it is called from an interrupt - * when the drive is ready to accept the command. + * Routine to send a read/write packet command to the drive. This is usually + * called directly from cdrom_start_{read,write}(). However, for drq_interrupt + * devices, it is called from an interrupt when the drive is ready to accept + * the command. */ static ide_startstop_t cdrom_start_rw_cont(ide_drive_t *drive) { @@ -727,7 +734,7 @@ static ide_startstop_t cdrom_start_rw_cont(ide_drive_t *drive) * is larger than the buffer size. */ if (nskip > 0) { - /* Sanity check... */ + /* sanity check... */ if (rq->current_nr_sectors != bio_cur_sectors(rq->bio)) { printk(KERN_ERR "%s: %s: buffer botch (%u)\n", @@ -744,10 +751,10 @@ static ide_startstop_t cdrom_start_rw_cont(ide_drive_t *drive) /* the immediate bit */ rq->cmd[1] = 1 << 3; #endif - /* Set up the command */ + /* set up the command */ rq->timeout = ATAPI_WAIT_PC; - /* Send the command to the drive and return. */ + /* send the command to the drive and return */ return cdrom_transfer_packet_command(drive, rq, cdrom_newpc_intr); } @@ -767,14 +774,8 @@ static ide_startstop_t cdrom_seek_intr(ide_drive_t *drive) info->cd_flags |= IDE_CD_FLAG_SEEKING; if (retry && time_after(jiffies, info->start_seek + IDECD_SEEK_TIMER)) { - if (--retry == 0) { - /* - * this condition is far too common, to bother - * users about it - */ - /* printk("%s: disabled DSC seek overlap\n", drive->name);*/ + if (--retry == 0) drive->dsc_overlap = 0; - } } return ide_stopped; } @@ -804,8 +805,8 @@ static ide_startstop_t cdrom_start_seek(ide_drive_t *drive, unsigned int block) } /* - * Fix up a possibly partially-processed request so that we can - * start it over entirely, or even put it back on the request queue. + * Fix up a possibly partially-processed request so that we can start it over + * entirely, or even put it back on the request queue. */ static void restore_request(struct request *rq) { @@ -822,10 +823,9 @@ static void restore_request(struct request *rq) rq->q->prep_rq_fn(rq->q, rq); } -/**************************************************************************** - * Execute all other packet commands. +/* + * All other packet commands. */ - static void ide_cd_request_sense_fixup(struct request *rq) { /* @@ -849,7 +849,7 @@ int ide_cd_queue_pc(ide_drive_t *drive, struct request *rq) if (rq->sense == NULL) rq->sense = &sense; - /* Start of retry loop. */ + /* start of retry loop */ do { int error; unsigned long time = jiffies; @@ -858,41 +858,45 @@ int ide_cd_queue_pc(ide_drive_t *drive, struct request *rq) error = ide_do_drive_cmd(drive, rq, ide_wait); time = jiffies - time; - /* FIXME: we should probably abort/retry or something - * in case of failure */ + /* + * FIXME: we should probably abort/retry or something in case of + * failure. + */ if (rq->cmd_flags & REQ_FAILED) { - /* The request failed. Retry if it was due to a unit - attention status - (usually means media was changed). */ + /* + * The request failed. Retry if it was due to a unit + * attention status (usually means media was changed). + */ struct request_sense *reqbuf = rq->sense; if (reqbuf->sense_key == UNIT_ATTENTION) cdrom_saw_media_change(drive); else if (reqbuf->sense_key == NOT_READY && reqbuf->asc == 4 && reqbuf->ascq != 4) { - /* The drive is in the process of loading - a disk. Retry, but wait a little to give - the drive time to complete the load. */ + /* + * The drive is in the process of loading + * a disk. Retry, but wait a little to give + * the drive time to complete the load. + */ ssleep(2); } else { - /* Otherwise, don't retry. */ + /* otherwise, don't retry */ retries = 0; } --retries; } - /* End of retry loop. */ + /* end of retry loop */ } while ((rq->cmd_flags & REQ_FAILED) && retries >= 0); - /* Return an error if the command failed. */ + /* return an error if the command failed */ return (rq->cmd_flags & REQ_FAILED) ? -EIO : 0; } /* - * Called from blk_end_request_callback() after the data of the request - * is completed and before the request is completed. - * By returning value '1', blk_end_request_callback() returns immediately - * without completing the request. + * Called from blk_end_request_callback() after the data of the request is + * completed and before the request itself is completed. By returning value '1', + * blk_end_request_callback() returns immediately without completing it. */ static int cdrom_newpc_intr_dummy_cb(struct request *rq) { @@ -911,7 +915,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) unsigned int timeout; u8 lowcyl, highcyl; - /* Check for errors. */ + /* check for errors */ dma = info->dma; if (dma) { info->dma = 0; @@ -926,9 +930,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) if (cdrom_decode_status(drive, 0, &stat)) return ide_stopped; - /* - * using dma, transfer is complete now - */ + /* using dma, transfer is complete now */ if (dma) { if (dma_error) return ide_error(drive, "dma error", stat); @@ -939,9 +941,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) goto end_request; } - /* - * ok we fall to pio :/ - */ + /* ok we fall to pio :/ */ ireason = hwif->INB(hwif->io_ports[IDE_IREASON_OFFSET]) & 0x3; lowcyl = hwif->INB(hwif->io_ports[IDE_BCOUNTL_OFFSET]); highcyl = hwif->INB(hwif->io_ports[IDE_BCOUNTH_OFFSET]); @@ -952,9 +952,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) if (thislen > len) thislen = len; - /* - * If DRQ is clear, the command has completed. - */ + /* If DRQ is clear, the command has completed. */ if ((stat & DRQ_STAT) == 0) { if (blk_fs_request(rq)) { /* @@ -975,15 +973,13 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) return ide_stopped; } else if (!blk_pc_request(rq)) { ide_cd_request_sense_fixup(rq); - /* Complain if we still have data left to transfer. */ + /* complain if we still have data left to transfer */ uptodate = rq->data_len ? 0 : 1; } goto end_request; } - /* - * check which way to transfer data - */ + /* check which way to transfer data */ if (ide_cd_check_ireason(drive, rq, len, ireason, write)) return ide_stopped; @@ -1019,16 +1015,12 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) xferfunc = HWIF(drive)->atapi_input_bytes; } - /* - * transfer data - */ + /* transfer data */ while (thislen > 0) { u8 *ptr = blk_fs_request(rq) ? NULL : rq->data; int blen = rq->data_len; - /* - * bio backed? - */ + /* bio backed? */ if (rq->bio) { if (blk_fs_request(rq)) { ptr = rq->buffer; @@ -1043,7 +1035,8 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) if (blk_fs_request(rq) && !write) /* * If the buffers are full, pipe the rest into - * oblivion. */ + * oblivion. + */ ide_cd_drain_data(drive, thislen >> 9); else { printk(KERN_ERR "%s: confused, missing data\n", @@ -1090,9 +1083,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) rq->sense_len += blen; } - /* - * pad, if necessary - */ + /* pad, if necessary */ if (!blk_fs_request(rq) && len > 0) ide_cd_pad_transfer(drive, xferfunc, len); @@ -1136,9 +1127,7 @@ static ide_startstop_t cdrom_start_rw(ide_drive_t *drive, struct request *rq) queue_hardsect_size(drive->queue) >> SECTOR_BITS; if (write) { - /* - * disk has become write protected - */ + /* disk has become write protected */ if (cd->disk->policy) { cdrom_end_request(drive, 0); return ide_stopped; @@ -1151,9 +1140,7 @@ static ide_startstop_t cdrom_start_rw(ide_drive_t *drive, struct request *rq) restore_request(rq); } - /* - * use DMA, if possible / writes *must* be hardware frame aligned - */ + /* use DMA, if possible / writes *must* be hardware frame aligned */ if ((rq->nr_sectors & (sectors_per_frame - 1)) || (rq->sector & (sectors_per_frame - 1))) { if (write) { @@ -1167,7 +1154,7 @@ static ide_startstop_t cdrom_start_rw(ide_drive_t *drive, struct request *rq) if (write) cd->devinfo.media_written = 1; - /* Start sending the read/write request to the drive. */ + /* start sending the read/write request to the drive */ return cdrom_start_packet_command(drive, 32768, cdrom_start_rw_cont); } @@ -1192,9 +1179,7 @@ static ide_startstop_t cdrom_do_block_pc(ide_drive_t *drive, struct request *rq) info->dma = 0; - /* - * sg request - */ + /* sg request */ if (rq->bio) { int mask = drive->queue->dma_alignment; unsigned long addr = (unsigned long) page_address(bio_page(rq->bio)); @@ -1211,11 +1196,11 @@ static ide_startstop_t cdrom_do_block_pc(ide_drive_t *drive, struct request *rq) info->dma = 0; } - /* Start sending the command to the drive. */ + /* start sending the command to the drive */ return cdrom_start_packet_command(drive, rq->data_len, cdrom_do_newpc_cont); } -/**************************************************************************** +/* * cdrom driver request routine. */ static ide_startstop_t @@ -1248,9 +1233,7 @@ ide_do_rw_cdrom(ide_drive_t *drive, struct request *rq, sector_t block) rq->cmd_type == REQ_TYPE_ATA_PC) { return cdrom_do_block_pc(drive, rq); } else if (blk_special_request(rq)) { - /* - * right now this can only be a reset... - */ + /* right now this can only be a reset... */ cdrom_end_request(drive, 1); return ide_stopped; } @@ -1262,16 +1245,15 @@ ide_do_rw_cdrom(ide_drive_t *drive, struct request *rq, sector_t block) -/**************************************************************************** +/* * Ioctl handling. * - * Routines which queue packet commands take as a final argument a pointer - * to a request_sense struct. If execution of the command results - * in an error with a CHECK CONDITION status, this structure will be filled - * with the results of the subsequent request sense command. The pointer - * can also be NULL, in which case no sense information is returned. + * Routines which queue packet commands take as a final argument a pointer to a + * request_sense struct. If execution of the command results in an error with a + * CHECK CONDITION status, this structure will be filled with the results of the + * subsequent request sense command. The pointer can also be NULL, in which case + * no sense information is returned. */ - static void msf_from_bcd(struct atapi_msf *msf) { @@ -1293,8 +1275,8 @@ int cdrom_check_status(ide_drive_t *drive, struct request_sense *sense) req.cmd_flags |= REQ_QUIET; /* - * Sanyo 3 CD changer uses byte 7 of TEST_UNIT_READY to - * switch CDs instead of supporting the LOAD_UNLOAD opcode. + * Sanyo 3 CD changer uses byte 7 of TEST_UNIT_READY to switch CDs + * instead of supporting the LOAD_UNLOAD opcode. */ req.cmd[7] = cdi->sanyo_slot % 3; @@ -1370,7 +1352,7 @@ int ide_cd_read_toc(ide_drive_t *drive, struct request_sense *sense) unsigned long sectors_per_frame = SECTORS_PER_FRAME; if (toc == NULL) { - /* Try to allocate space. */ + /* try to allocate space */ toc = kmalloc(sizeof(struct atapi_toc), GFP_KERNEL); if (toc == NULL) { printk(KERN_ERR "%s: No cdrom TOC buffer!\n", drive->name); @@ -1379,27 +1361,29 @@ int ide_cd_read_toc(ide_drive_t *drive, struct request_sense *sense) info->toc = toc; } - /* Check to see if the existing data is still valid. - If it is, just return. */ + /* + * Check to see if the existing data is still valid. If it is, + * just return. + */ (void) cdrom_check_status(drive, sense); if (info->cd_flags & IDE_CD_FLAG_TOC_VALID) return 0; - /* Try to get the total cdrom capacity and sector size. */ + /* try to get the total cdrom capacity and sector size */ stat = cdrom_read_capacity(drive, &toc->capacity, §ors_per_frame, sense); if (stat) toc->capacity = 0x1fffff; set_capacity(info->disk, toc->capacity * sectors_per_frame); - /* Save a private copy of te TOC capacity for error handling */ + /* save a private copy of the TOC capacity for error handling */ drive->probed_capacity = toc->capacity * sectors_per_frame; blk_queue_hardsect_size(drive->queue, sectors_per_frame << SECTOR_BITS); - /* First read just the header, so we know how long the TOC is. */ + /* first read just the header, so we know how long the TOC is */ stat = cdrom_read_tocentry(drive, 0, 1, 0, (char *) &toc->hdr, sizeof(struct atapi_toc_header), sense); if (stat) @@ -1416,7 +1400,7 @@ int ide_cd_read_toc(ide_drive_t *drive, struct request_sense *sense) if (ntracks > MAX_TRACKS) ntracks = MAX_TRACKS; - /* Now read the whole schmeer. */ + /* now read the whole schmeer */ stat = cdrom_read_tocentry(drive, toc->hdr.first_track, 1, 0, (char *)&toc->hdr, sizeof(struct atapi_toc_header) + @@ -1424,15 +1408,18 @@ int ide_cd_read_toc(ide_drive_t *drive, struct request_sense *sense) sizeof(struct atapi_toc_entry), sense); if (stat && toc->hdr.first_track > 1) { - /* Cds with CDI tracks only don't have any TOC entries, - despite of this the returned values are - first_track == last_track = number of CDI tracks + 1, - so that this case is indistinguishable from the same - layout plus an additional audio track. - If we get an error for the regular case, we assume - a CDI without additional audio tracks. In this case - the readable TOC is empty (CDI tracks are not included) - and only holds the Leadout entry. Heiko Eißfeldt */ + /* + * Cds with CDI tracks only don't have any TOC entries, despite + * of this the returned values are + * first_track == last_track = number of CDI tracks + 1, + * so that this case is indistinguishable from the same layout + * plus an additional audio track. If we get an error for the + * regular case, we assume a CDI without additional audio + * tracks. In this case the readable TOC is empty (CDI tracks + * are not included) and only holds the Leadout entry. + * + * Heiko Eißfeldt. + */ ntracks = 0; stat = cdrom_read_tocentry(drive, CDROM_LEADOUT, 1, 0, (char *)&toc->hdr, @@ -1473,9 +1460,8 @@ int ide_cd_read_toc(ide_drive_t *drive, struct request_sense *sense) toc->ent[i].addr.msf.frame); } - /* Read the multisession information. */ if (toc->hdr.first_track != CDROM_LEADOUT) { - /* Read the multisession information. */ + /* read the multisession information */ stat = cdrom_read_tocentry(drive, 0, 0, 1, (char *)&ms_tmp, sizeof(ms_tmp), sense); if (stat) @@ -1488,7 +1474,7 @@ int ide_cd_read_toc(ide_drive_t *drive, struct request_sense *sense) } if (info->cd_flags & IDE_CD_FLAG_TOCADDR_AS_BCD) { - /* Re-read multisession information using MSF format */ + /* re-read multisession information using MSF format */ stat = cdrom_read_tocentry(drive, 0, 1, 1, (char *)&ms_tmp, sizeof(ms_tmp), sense); if (stat) @@ -1502,7 +1488,7 @@ int ide_cd_read_toc(ide_drive_t *drive, struct request_sense *sense) toc->xa_flag = (ms_tmp.hdr.first_track != ms_tmp.hdr.last_track); - /* Now try to get the total cdrom capacity. */ + /* now try to get the total cdrom capacity */ stat = cdrom_get_last_written(cdi, &last_written); if (!stat && (last_written > toc->capacity)) { toc->capacity = last_written; @@ -1527,7 +1513,8 @@ int ide_cdrom_get_capabilities(ide_drive_t *drive, u8 *buf) size -= ATAPI_CAPABILITIES_PAGE_PAD_SIZE; init_cdrom_command(&cgc, buf, size, CGC_DATA_UNKNOWN); - do { /* we seem to get stat=0x01,err=0x00 the first time (??) */ + do { + /* we seem to get stat=0x01,err=0x00 the first time (??) */ stat = cdrom_mode_sense(cdi, &cgc, GPMODE_CAPABILITIES_PAGE, 0); if (!stat) break; @@ -1622,11 +1609,10 @@ int ide_cdrom_probe_capabilities(ide_drive_t *drive) } /* - * we have to cheat a little here. the packet will eventually - * be queued with ide_cdrom_packet(), which extracts the - * drive from cdi->handle. Since this device hasn't been - * registered with the Uniform layer yet, it can't do this. - * Same goes for cdi->ops. + * We have to cheat a little here. the packet will eventually be queued + * with ide_cdrom_packet(), which extracts the drive from cdi->handle. + * Since this device hasn't been registered with the Uniform layer yet, + * it can't do this. Same goes for cdi->ops. */ cdi->handle = drive; cdi->ops = &ide_cdrom_dops; @@ -1695,9 +1681,7 @@ int ide_cdrom_probe_capabilities(ide_drive_t *drive) return nslots; } -/* - * standard prep_rq_fn that builds 10 byte cmds - */ +/* standard prep_rq_fn that builds 10 byte cmds */ static int ide_cdrom_prep_fs(struct request_queue *q, struct request *rq) { int hard_sect = queue_hardsect_size(q); @@ -1736,9 +1720,7 @@ static int ide_cdrom_prep_pc(struct request *rq) { u8 *c = rq->cmd; - /* - * Transform 6-byte read/write commands to the 10-byte version - */ + /* transform 6-byte read/write commands to the 10-byte version */ if (c[0] == READ_6 || c[0] == WRITE_6) { c[8] = c[4]; c[5] = c[3]; @@ -1902,13 +1884,12 @@ int ide_cdrom_setup(ide_drive_t *drive) id->fw_rev[4] == '1' && id->fw_rev[6] <= '2') cd->cd_flags |= IDE_CD_FLAG_TOCTRACKS_AS_BCD; else if (cd->cd_flags & IDE_CD_FLAG_SANYO_3CD) - cdi->sanyo_slot = 3; /* 3 => use CD in slot 0 */ + /* 3 => use CD in slot 0 */ + cdi->sanyo_slot = 3; nslots = ide_cdrom_probe_capabilities(drive); - /* - * set correct block size - */ + /* set correct block size */ blk_queue_hardsect_size(drive->queue, CD_FRAMESIZE); if (drive->autotune == IDE_TUNE_DEFAULT || @@ -2092,7 +2073,7 @@ static struct block_device_operations idecd_ops = { .revalidate_disk = idecd_revalidate_disk }; -/* options */ +/* module options */ static char *ignore; module_param(ignore, charp, 0400); |