diff options
Diffstat (limited to 'drivers/ide/ide-floppy.c')
| -rw-r--r-- | drivers/ide/ide-floppy.c | 1197 |
1 files changed, 159 insertions, 1038 deletions
diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index e9034c0125f..aeb1ad782f5 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -15,9 +15,6 @@ * Documentation/ide/ChangeLog.ide-floppy.1996-2002 */ -#define IDEFLOPPY_VERSION "1.00" - -#include <linux/module.h> #include <linux/types.h> #include <linux/string.h> #include <linux/kernel.h> @@ -31,8 +28,10 @@ #include <linux/slab.h> #include <linux/cdrom.h> #include <linux/ide.h> +#include <linux/hdreg.h> #include <linux/bitops.h> #include <linux/mutex.h> +#include <linux/scatterlist.h> #include <scsi/scsi_ioctl.h> @@ -42,22 +41,7 @@ #include <linux/io.h> #include <asm/unaligned.h> -/* define to see debug info */ -#define IDEFLOPPY_DEBUG_LOG 0 - -/* #define IDEFLOPPY_DEBUG(fmt, args...) printk(KERN_INFO fmt, ## args) */ -#define IDEFLOPPY_DEBUG(fmt, args...) - -#if IDEFLOPPY_DEBUG_LOG -#define debug_log(fmt, args...) \ - printk(KERN_INFO "ide-floppy: " fmt, ## args) -#else -#define debug_log(fmt, args...) do {} while (0) -#endif - - -/* Some drives require a longer irq timeout. */ -#define IDEFLOPPY_WAIT_CMD (5 * WAIT_CMD) +#include "ide-floppy.h" /* * After each failed packet command we issue a request sense command and retry @@ -65,19 +49,6 @@ */ #define IDEFLOPPY_MAX_PC_RETRIES 3 -/* - * With each packet command, we allocate a buffer of IDEFLOPPY_PC_BUFFER_SIZE - * bytes. - */ -#define IDEFLOPPY_PC_BUFFER_SIZE 256 - -/* - * In various places in the driver, we need to allocate storage for packet - * commands and requests, which will remain valid while we leave the driver to - * wait for an interrupt or a timeout event. - */ -#define IDEFLOPPY_PC_STACK (10 + IDEFLOPPY_MAX_PC_RETRIES) - /* format capacities descriptor codes */ #define CAPACITY_INVALID 0x00 #define CAPACITY_UNFORMATTED 0x01 @@ -85,124 +56,39 @@ #define CAPACITY_NO_CARTRIDGE 0x03 /* - * Most of our global data which we need to save even as we leave the driver - * due to an interrupt or a timer event is stored in a variable of type - * idefloppy_floppy_t, defined below. + * The following delay solves a problem with ATAPI Zip 100 drive where BSY bit + * was apparently being deasserted before the unit was ready to receive data. */ -typedef struct ide_floppy_obj { - ide_drive_t *drive; - ide_driver_t *driver; - struct gendisk *disk; - struct kref kref; - unsigned int openers; /* protected by BKL for now */ - - /* Current packet command */ - struct ide_atapi_pc *pc; - /* Last failed packet command */ - struct ide_atapi_pc *failed_pc; - /* Packet command stack */ - struct ide_atapi_pc pc_stack[IDEFLOPPY_PC_STACK]; - /* Next free packet command storage space */ - int pc_stack_index; - struct request rq_stack[IDEFLOPPY_PC_STACK]; - /* We implement a circular array */ - int rq_stack_index; - - /* Last error information */ - u8 sense_key, asc, ascq; - /* delay this long before sending packet command */ - u8 ticks; - int progress_indication; - - /* Device information */ - /* Current format */ - int blocks, block_size, bs_factor; - /* Last format capacity descriptor */ - u8 cap_desc[8]; - /* Copy of the flexible disk page */ - u8 flexible_disk_page[32]; - /* Write protect */ - int wp; - /* Supports format progress report */ - int srfp; -} idefloppy_floppy_t; - -#define IDEFLOPPY_TICKS_DELAY HZ/20 /* default delay for ZIP 100 (50ms) */ - -/* Defines for the MODE SENSE command */ -#define MODE_SENSE_CURRENT 0x00 -#define MODE_SENSE_CHANGEABLE 0x01 -#define MODE_SENSE_DEFAULT 0x02 -#define MODE_SENSE_SAVED 0x03 - -/* IOCTLs used in low-level formatting. */ -#define IDEFLOPPY_IOCTL_FORMAT_SUPPORTED 0x4600 -#define IDEFLOPPY_IOCTL_FORMAT_GET_CAPACITY 0x4601 -#define IDEFLOPPY_IOCTL_FORMAT_START 0x4602 -#define IDEFLOPPY_IOCTL_FORMAT_GET_PROGRESS 0x4603 +#define IDEFLOPPY_PC_DELAY (HZ/20) /* default delay for ZIP 100 (50ms) */ /* Error code returned in rq->errors to the higher part of the driver. */ #define IDEFLOPPY_ERROR_GENERAL 101 /* - * Pages of the SELECT SENSE / MODE SENSE packet commands. - * See SFF-8070i spec. - */ -#define IDEFLOPPY_CAPABILITIES_PAGE 0x1b -#define IDEFLOPPY_FLEXIBLE_DISK_PAGE 0x05 - -static DEFINE_MUTEX(idefloppy_ref_mutex); - -#define to_ide_floppy(obj) container_of(obj, struct ide_floppy_obj, kref) - -#define ide_floppy_g(disk) \ - container_of((disk)->private_data, struct ide_floppy_obj, driver) - -static void idefloppy_cleanup_obj(struct kref *); - -static struct ide_floppy_obj *ide_floppy_get(struct gendisk *disk) -{ - struct ide_floppy_obj *floppy = NULL; - - mutex_lock(&idefloppy_ref_mutex); - floppy = ide_floppy_g(disk); - if (floppy) { - if (ide_device_get(floppy->drive)) - floppy = NULL; - else - kref_get(&floppy->kref); - } - mutex_unlock(&idefloppy_ref_mutex); - return floppy; -} - -static void ide_floppy_put(struct ide_floppy_obj *floppy) -{ - ide_drive_t *drive = floppy->drive; - - mutex_lock(&idefloppy_ref_mutex); - kref_put(&floppy->kref, idefloppy_cleanup_obj); - ide_device_put(drive); - mutex_unlock(&idefloppy_ref_mutex); -} - -/* * Used to finish servicing a request. For read/write requests, we will call * ide_end_request to pass to the next buffer. */ -static int idefloppy_end_request(ide_drive_t *drive, int uptodate, int nsecs) +static int ide_floppy_end_request(ide_drive_t *drive, int uptodate, int nsecs) { - idefloppy_floppy_t *floppy = drive->driver_data; + struct ide_disk_obj *floppy = drive->driver_data; struct request *rq = HWGROUP(drive)->rq; int error; - debug_log("Reached %s\n", __func__); + ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__); switch (uptodate) { - case 0: error = IDEFLOPPY_ERROR_GENERAL; break; - case 1: error = 0; break; - default: error = uptodate; + case 0: + error = IDEFLOPPY_ERROR_GENERAL; + break; + + case 1: + error = 0; + break; + + default: + error = uptodate; } + if (error) floppy->failed_pc = NULL; /* Why does this happen? */ @@ -219,44 +105,6 @@ static int idefloppy_end_request(ide_drive_t *drive, int uptodate, int nsecs) return 0; } -static void ide_floppy_io_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc, - unsigned int bcount, int direction) -{ - ide_hwif_t *hwif = drive->hwif; - struct request *rq = pc->rq; - struct req_iterator iter; - struct bio_vec *bvec; - unsigned long flags; - int count, done = 0; - char *data; - - rq_for_each_segment(bvec, rq, iter) { - if (!bcount) - break; - - count = min(bvec->bv_len, bcount); - - data = bvec_kmap_irq(bvec, &flags); - if (direction) - hwif->tp_ops->output_data(drive, NULL, data, count); - else - hwif->tp_ops->input_data(drive, NULL, data, count); - bvec_kunmap_irq(data, &flags); - - bcount -= count; - pc->b_count += count; - done += count; - } - - idefloppy_end_request(drive, 1, done >> 9); - - if (bcount) { - printk(KERN_ERR "%s: leftover data in %s, bcount == %d\n", - drive->name, __func__, bcount); - ide_pad_transfer(drive, direction, bcount); - } -} - static void idefloppy_update_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc) { @@ -264,53 +112,16 @@ static void idefloppy_update_buffers(ide_drive_t *drive, struct bio *bio = rq->bio; while ((bio = rq->bio) != NULL) - idefloppy_end_request(drive, 1, 0); + ide_floppy_end_request(drive, 1, 0); } -/* - * Generate a new packet command request in front of the request queue, before - * the current request so that it will be processed immediately, on the next - * pass through the driver. - */ -static void idefloppy_queue_pc_head(ide_drive_t *drive, struct ide_atapi_pc *pc, - struct request *rq) +static void ide_floppy_callback(ide_drive_t *drive, int dsc) { - struct ide_floppy_obj *floppy = drive->driver_data; - - blk_rq_init(NULL, rq); - rq->buffer = (char *) pc; - rq->cmd_type = REQ_TYPE_SPECIAL; - rq->cmd_flags |= REQ_PREEMPT; - rq->rq_disk = floppy->disk; - memcpy(rq->cmd, pc->c, 12); - ide_do_drive_cmd(drive, rq); -} - -static struct ide_atapi_pc *idefloppy_next_pc_storage(ide_drive_t *drive) -{ - idefloppy_floppy_t *floppy = drive->driver_data; - - if (floppy->pc_stack_index == IDEFLOPPY_PC_STACK) - floppy->pc_stack_index = 0; - return (&floppy->pc_stack[floppy->pc_stack_index++]); -} - -static struct request *idefloppy_next_rq_storage(ide_drive_t *drive) -{ - idefloppy_floppy_t *floppy = drive->driver_data; - - if (floppy->rq_stack_index == IDEFLOPPY_PC_STACK) - floppy->rq_stack_index = 0; - return (&floppy->rq_stack[floppy->rq_stack_index++]); -} - -static void ide_floppy_callback(ide_drive_t *drive) -{ - idefloppy_floppy_t *floppy = drive->driver_data; - struct ide_atapi_pc *pc = floppy->pc; + struct ide_disk_obj *floppy = drive->driver_data; + struct ide_atapi_pc *pc = drive->pc; int uptodate = pc->error ? 0 : 1; - debug_log("Reached %s\n", __func__); + ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__); if (floppy->failed_pc == pc) floppy->failed_pc = NULL; @@ -319,7 +130,7 @@ static void ide_floppy_callback(ide_drive_t *drive) (pc->rq && blk_pc_request(pc->rq))) uptodate = 1; /* FIXME */ else if (pc->c[0] == GPCMD_REQUEST_SENSE) { - u8 *buf = floppy->pc->buf; + u8 *buf = pc->buf; if (!pc->error) { floppy->sense_key = buf[2] & 0x0F; @@ -329,109 +140,21 @@ static void ide_floppy_callback(ide_drive_t *drive) (u16)get_unaligned((u16 *)&buf[16]) : 0x10000; if (floppy->failed_pc) - debug_log("pc = %x, ", floppy->failed_pc->c[0]); + ide_debug_log(IDE_DBG_PC, "pc = %x, ", + floppy->failed_pc->c[0]); - debug_log("sense key = %x, asc = %x, ascq = %x\n", - floppy->sense_key, floppy->asc, floppy->ascq); + ide_debug_log(IDE_DBG_SENSE, "sense key = %x, asc = %x," + "ascq = %x\n", floppy->sense_key, + floppy->asc, floppy->ascq); } else - printk(KERN_ERR "Error in REQUEST SENSE itself - " - "Aborting request!\n"); + printk(KERN_ERR PFX "Error in REQUEST SENSE itself - " + "Aborting request!\n"); } - idefloppy_end_request(drive, uptodate, 0); -} - -static void idefloppy_init_pc(struct ide_atapi_pc *pc) -{ - memset(pc, 0, sizeof(*pc)); - pc->buf = pc->pc_buf; - pc->buf_size = IDEFLOPPY_PC_BUFFER_SIZE; -} - -static void idefloppy_create_request_sense_cmd(struct ide_atapi_pc *pc) -{ - idefloppy_init_pc(pc); - pc->c[0] = GPCMD_REQUEST_SENSE; - pc->c[4] = 255; - pc->req_xfer = 18; -} - -/* - * Called when an error was detected during the last packet command. We queue a - * request sense packet command in the head of the request list. - */ -static void idefloppy_retry_pc(ide_drive_t *drive) -{ - struct ide_atapi_pc *pc; - struct request *rq; - - (void)ide_read_error(drive); - pc = idefloppy_next_pc_storage(drive); - rq = idefloppy_next_rq_storage(drive); - idefloppy_create_request_sense_cmd(pc); - idefloppy_queue_pc_head(drive, pc, rq); + ide_floppy_end_request(drive, uptodate, 0); } -/* The usual interrupt handler called during a packet command. */ -static ide_startstop_t idefloppy_pc_intr(ide_drive_t *drive) -{ - idefloppy_floppy_t *floppy = drive->driver_data; - - return ide_pc_intr(drive, floppy->pc, idefloppy_pc_intr, - IDEFLOPPY_WAIT_CMD, NULL, idefloppy_update_buffers, - idefloppy_retry_pc, NULL, ide_floppy_io_buffers); -} - -/* - * What we have here is a classic case of a top half / bottom half interrupt - * service routine. In interrupt mode, the device sends an interrupt to signal - * that it is ready to receive a packet. However, we need to delay about 2-3 - * ticks before issuing the packet or we gets in trouble. - */ -static int idefloppy_transfer_pc(ide_drive_t *drive) -{ - idefloppy_floppy_t *floppy = drive->driver_data; - - /* Send the actual packet */ - drive->hwif->tp_ops->output_data(drive, NULL, floppy->pc->c, 12); - - /* Timeout for the packet command */ - return IDEFLOPPY_WAIT_CMD; -} - - -/* - * Called as an interrupt (or directly). When the device says it's ready for a - * packet, we schedule the packet transfer to occur about 2-3 ticks later in - * transfer_pc. - */ -static ide_startstop_t idefloppy_start_pc_transfer(ide_drive_t *drive) -{ - idefloppy_floppy_t *floppy = drive->driver_data; - struct ide_atapi_pc *pc = floppy->pc; - ide_expiry_t *expiry; - unsigned int timeout; - - /* - * The following delay solves a problem with ATAPI Zip 100 drives - * where the Busy flag was apparently being deasserted before the - * unit was ready to receive data. This was happening on a - * 1200 MHz Athlon system. 10/26/01 25msec is too short, - * 40 and 50msec work well. idefloppy_pc_intr will not be actually - * used until after the packet is moved in about 50 msec. - */ - if (drive->atapi_flags & IDE_AFLAG_ZIP_DRIVE) { - timeout = floppy->ticks; - expiry = &idefloppy_transfer_pc; - } else { - timeout = IDEFLOPPY_WAIT_CMD; - expiry = NULL; - } - - return ide_transfer_pc(drive, pc, idefloppy_pc_intr, timeout, expiry); -} - -static void ide_floppy_report_error(idefloppy_floppy_t *floppy, +static void ide_floppy_report_error(struct ide_disk_obj *floppy, struct ide_atapi_pc *pc) { /* supress error messages resulting from Medium not present */ @@ -440,7 +163,7 @@ static void ide_floppy_report_error(idefloppy_floppy_t *floppy, floppy->ascq == 0x00) return; - printk(KERN_ERR "ide-floppy: %s: I/O error, pc = %2x, key = %2x, " + printk(KERN_ERR PFX "%s: I/O error, pc = %2x, key = %2x, " "asc = %2x, ascq = %2x\n", floppy->drive->name, pc->c[0], floppy->sense_key, floppy->asc, floppy->ascq); @@ -450,13 +173,14 @@ static void ide_floppy_report_error(idefloppy_floppy_t *floppy, static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive, struct ide_atapi_pc *pc) { - idefloppy_floppy_t *floppy = drive->driver_data; + struct ide_disk_obj *floppy = drive->driver_data; if (floppy->failed_pc == NULL && pc->c[0] != GPCMD_REQUEST_SENSE) floppy->failed_pc = pc; + /* Set the current packet command */ - floppy->pc = pc; + drive->pc = pc; if (pc->retries > IDEFLOPPY_MAX_PC_RETRIES) { if (!(pc->flags & PC_FLAG_SUPPRESS_ERROR)) @@ -465,67 +189,35 @@ static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive, pc->error = IDEFLOPPY_ERROR_GENERAL; floppy->failed_pc = NULL; - drive->pc_callback(drive); + drive->pc_callback(drive, 0); return ide_stopped; } - debug_log("Retry number - %d\n", pc->retries); + ide_debug_log(IDE_DBG_FUNC, "%s: Retry #%d\n", __func__, pc->retries); pc->retries++; - return ide_issue_pc(drive, pc, idefloppy_start_pc_transfer, - IDEFLOPPY_WAIT_CMD, NULL); + return ide_issue_pc(drive, WAIT_FLOPPY_CMD, NULL); } -static void idefloppy_create_prevent_cmd(struct ide_atapi_pc *pc, int prevent) +void ide_floppy_create_read_capacity_cmd(struct ide_atapi_pc *pc) { - debug_log("creating prevent removal command, prevent = %d\n", prevent); - - idefloppy_init_pc(pc); - pc->c[0] = GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL; - pc->c[4] = prevent; -} - -static void idefloppy_create_read_capacity_cmd(struct ide_atapi_pc *pc) -{ - idefloppy_init_pc(pc); + ide_init_pc(pc); pc->c[0] = GPCMD_READ_FORMAT_CAPACITIES; pc->c[7] = 255; pc->c[8] = 255; pc->req_xfer = 255; } -static void idefloppy_create_format_unit_cmd(struct ide_atapi_pc *pc, int b, - int l, int flags) -{ - idefloppy_init_pc(pc); - pc->c[0] = GPCMD_FORMAT_UNIT; - pc->c[1] = 0x17; - - memset(pc->buf, 0, 12); - pc->buf[1] = 0xA2; - /* Default format list header, u8 1: FOV/DCRT/IMM bits set */ - - if (flags & 1) /* Verify bit on... */ - pc->buf[1] ^= 0x20; /* ... turn off DCRT bit */ - pc->buf[3] = 8; - - put_unaligned(cpu_to_be32(b), (unsigned int *)(&pc->buf[4])); - put_unaligned(cpu_to_be32(l), (unsigned int *)(&pc->buf[8])); - pc->buf_size = 12; - pc->flags |= PC_FLAG_WRITING; -} - /* A mode sense command is used to "sense" floppy parameters. */ -static void idefloppy_create_mode_sense_cmd(struct ide_atapi_pc *pc, - u8 page_code, u8 type) +void ide_floppy_create_mode_sense_cmd(struct ide_atapi_pc *pc, u8 page_code) { u16 length = 8; /* sizeof(Mode Parameter Header) = 8 Bytes */ - idefloppy_init_pc(pc); + ide_init_pc(pc); pc->c[0] = GPCMD_MODE_SENSE_10; pc->c[1] = 0; - pc->c[2] = page_code + (type << 6); + pc->c[2] = page_code; switch (page_code) { case IDEFLOPPY_CAPABILITIES_PAGE: @@ -535,32 +227,25 @@ static void idefloppy_create_mode_sense_cmd(struct ide_atapi_pc *pc, length += 32; break; default: - printk(KERN_ERR "ide-floppy: unsupported page code " - "in create_mode_sense_cmd\n"); + printk(KERN_ERR PFX "unsupported page code in %s\n", __func__); } put_unaligned(cpu_to_be16(length), (u16 *) &pc->c[7]); pc->req_xfer = length; } -static void idefloppy_create_start_stop_cmd(struct ide_atapi_pc *pc, int start) -{ - idefloppy_init_pc(pc); - pc->c[0] = GPCMD_START_STOP_UNIT; - pc->c[4] = start; -} - -static void idefloppy_create_rw_cmd(idefloppy_floppy_t *floppy, +static void idefloppy_create_rw_cmd(ide_drive_t *drive, struct ide_atapi_pc *pc, struct request *rq, unsigned long sector) { + struct ide_disk_obj *floppy = drive->driver_data; int block = sector / floppy->bs_factor; int blocks = rq->nr_sectors / floppy->bs_factor; int cmd = rq_data_dir(rq); - debug_log("create_rw10_cmd: block == %d, blocks == %d\n", - block, blocks); + ide_debug_log(IDE_DBG_FUNC, "%s: block: %d, blocks: %d\n", __func__, + block, blocks); - idefloppy_init_pc(pc); + ide_init_pc(pc); pc->c[0] = cmd == READ ? GPCMD_READ_10 : GPCMD_WRITE_10; put_unaligned(cpu_to_be16(blocks), (unsigned short *)&pc->c[7]); put_unaligned(cpu_to_be32(block), (unsigned int *) &pc->c[2]); @@ -568,7 +253,7 @@ static void idefloppy_create_rw_cmd(idefloppy_floppy_t *floppy, memcpy(rq->cmd, pc->c, 12); pc->rq = rq; - pc->b_count = cmd == READ ? 0 : rq->bio->bi_size; + pc->b_count = 0; if (rq->cmd_flags & REQ_RW) pc->flags |= PC_FLAG_WRITING; pc->buf = NULL; @@ -576,13 +261,13 @@ static void idefloppy_create_rw_cmd(idefloppy_floppy_t *floppy, pc->flags |= PC_FLAG_DMA_OK; } -static void idefloppy_blockpc_cmd(idefloppy_floppy_t *floppy, +static void idefloppy_blockpc_cmd(struct ide_disk_obj *floppy, struct ide_atapi_pc *pc, struct request *rq) { - idefloppy_init_pc(pc); + ide_init_pc(pc); memcpy(pc->c, rq->cmd, sizeof(pc->c)); pc->rq = rq; - pc->b_count = rq->data_len; + pc->b_count = 0; if (rq->data_len && rq_data_dir(rq) == WRITE) pc->flags |= PC_FLAG_WRITING; pc->buf = rq->data; @@ -595,74 +280,62 @@ static void idefloppy_blockpc_cmd(idefloppy_floppy_t *floppy, pc->req_xfer = pc->buf_size = rq->data_len; } -static ide_startstop_t idefloppy_do_request(ide_drive_t *drive, - struct request *rq, sector_t block_s) +static ide_startstop_t ide_floppy_do_request(ide_drive_t *drive, + struct request *rq, sector_t block) { - idefloppy_floppy_t *floppy = drive->driver_data; + struct ide_disk_obj *floppy = drive->driver_data; + ide_hwif_t *hwif = drive->hwif; struct ide_atapi_pc *pc; - unsigned long block = (unsigned long)block_s; - debug_log("dev: %s, cmd_type: %x, errors: %d\n", - rq->rq_disk ? rq->rq_disk->disk_name : "?", - rq->cmd_type, rq->errors); - debug_log("sector: %ld, nr_sectors: %ld, " - "current_nr_sectors: %d\n", (long)rq->sector, - rq->nr_sectors, rq->current_nr_sectors); + ide_debug_log(IDE_DBG_FUNC, "%s: dev: %s, cmd: 0x%x, cmd_type: %x, " + "errors: %d\n", + __func__, rq->rq_disk ? rq->rq_disk->disk_name : "?", + rq->cmd[0], rq->cmd_type, rq->errors); + + ide_debug_log(IDE_DBG_FUNC, "%s: sector: %ld, nr_sectors: %ld, " + "current_nr_sectors: %d\n", + __func__, (long)rq->sector, rq->nr_sectors, + rq->current_nr_sectors); if (rq->errors >= ERROR_MAX) { if (floppy->failed_pc) ide_floppy_report_error(floppy, floppy->failed_pc); else - printk(KERN_ERR "ide-floppy: %s: I/O error\n", - drive->name); - idefloppy_end_request(drive, 0, 0); + printk(KERN_ERR PFX "%s: I/O error\n", drive->name); + + ide_floppy_end_request(drive, 0, 0); return ide_stopped; } if (blk_fs_request(rq)) { if (((long)rq->sector % floppy->bs_factor) || (rq->nr_sectors % floppy->bs_factor)) { - printk(KERN_ERR "%s: unsupported r/w request size\n", - drive->name); - idefloppy_end_request(drive, 0, 0); + printk(KERN_ERR PFX "%s: unsupported r/w rq size\n", + drive->name); + ide_floppy_end_request(drive, 0, 0); return ide_stopped; } - pc = idefloppy_next_pc_storage(drive); - idefloppy_create_rw_cmd(floppy, pc, rq, block); + pc = &floppy->queued_pc; + idefloppy_create_rw_cmd(drive, pc, rq, (unsigned long)block); } else if (blk_special_request(rq)) { pc = (struct ide_atapi_pc *) rq->buffer; } else if (blk_pc_request(rq)) { - pc = idefloppy_next_pc_storage(drive); + pc = &floppy->queued_pc; idefloppy_blockpc_cmd(floppy, pc, rq); } else { - blk_dump_rq_flags(rq, - "ide-floppy: unsupported command in queue"); - idefloppy_end_request(drive, 0, 0); + blk_dump_rq_flags(rq, PFX "unsupported command in queue"); + ide_floppy_end_request(drive, 0, 0); return ide_stopped; } - pc->rq = rq; + ide_init_sg_cmd(drive, rq); + ide_map_sg(drive, rq); - return idefloppy_issue_pc(drive, pc); -} + pc->sg = hwif->sg_table; + pc->sg_cnt = hwif->sg_nents; -/* - * Add a special packet command request to the tail of the request queue, - * and wait for it to be serviced. - */ -static int idefloppy_queue_pc_tail(ide_drive_t *drive, struct ide_atapi_pc *pc) -{ - struct ide_floppy_obj *floppy = drive->driver_data; - struct request *rq; - int error; - - rq = blk_get_request(drive->queue, READ, __GFP_WAIT); - rq->buffer = (char *) pc; - rq->cmd_type = REQ_TYPE_SPECIAL; - memcpy(rq->cmd, pc->c, 12); - error = blk_execute_rq(drive->queue, floppy->disk, rq, 0); - blk_put_request(rq); + pc->rq = rq; - return error; + return idefloppy_issue_pc(drive, pc); } /* @@ -671,23 +344,28 @@ static int idefloppy_queue_pc_tail(ide_drive_t *drive, struct ide_atapi_pc *pc) */ static int ide_floppy_get_flexible_disk_page(ide_drive_t *drive) { - idefloppy_floppy_t *floppy = drive->driver_data; + struct ide_disk_obj *floppy = drive->driver_data; + struct gendisk *disk = floppy->disk; struct ide_atapi_pc pc; u8 *page; int capacity, lba_capacity; u16 transfer_rate, sector_size, cyls, rpm; u8 heads, sectors; - idefloppy_create_mode_sense_cmd(&pc, IDEFLOPPY_FLEXIBLE_DISK_PAGE, - MODE_SENSE_CURRENT); + ide_floppy_create_mode_sense_cmd(&pc, IDEFLOPPY_FLEXIBLE_DISK_PAGE); - if (idefloppy_queue_pc_tail(drive, &pc)) { - printk(KERN_ERR "ide-floppy: Can't get flexible disk page" - " parameters\n"); + if (ide_queue_pc_tail(drive, disk, &pc)) { + printk(KERN_ERR PFX "Can't get flexible disk page params\n"); return 1; } - floppy->wp = !!(pc.buf[3] & 0x80); - set_disk_ro(floppy->disk, floppy->wp); + + if (pc.buf[3] & 0x80) + drive->dev_flags |= IDE_DFLAG_WP; + else + drive->dev_flags &= ~IDE_DFLAG_WP; + + set_disk_ro(disk, !!(drive->dev_flags & IDE_DFLAG_WP)); + page = &pc.buf[8]; transfer_rate = be16_to_cpup((__be16 *)&pc.buf[8 + 2]); @@ -700,7 +378,7 @@ static int ide_floppy_get_flexible_disk_page(ide_drive_t *drive) capacity = cyls * heads * sectors * sector_size; if (memcmp(page, &floppy->flexible_disk_page, 32)) - printk(KERN_INFO "%s: %dkB, %d/%d/%d CHS, %d kBps, " + printk(KERN_INFO PFX "%s: %dkB, %d/%d/%d CHS, %d kBps, " "%d sector size, %d rpm\n", drive->name, capacity / 1024, cyls, heads, sectors, transfer_rate / 8, sector_size, rpm); @@ -712,30 +390,15 @@ static int ide_floppy_get_flexible_disk_page(ide_drive_t *drive) lba_capacity = floppy->blocks * floppy->block_size; if (capacity < lba_capacity) { - printk(KERN_NOTICE "%s: The disk reports a capacity of %d " + printk(KERN_NOTICE PFX "%s: The disk reports a capacity of %d " "bytes, but the drive only handles %d\n", drive->name, lba_capacity, capacity); floppy->blocks = floppy->block_size ? capacity / floppy->block_size : 0; + drive->capacity64 = floppy->blocks * floppy->bs_factor; } - return 0; -} -static int idefloppy_get_sfrp_bit(ide_drive_t *drive) -{ - idefloppy_floppy_t *floppy = drive->driver_data; - struct ide_atapi_pc pc; - - floppy->srfp = 0; - idefloppy_create_mode_sense_cmd(&pc, IDEFLOPPY_CAPABILITIES_PAGE, - MODE_SENSE_CURRENT); - - pc.flags |= PC_FLAG_SUPPRESS_ERROR; - if (idefloppy_queue_pc_tail(drive, &pc)) - return 1; - - floppy->srfp = pc.buf[8 + 2] & 0x40; - return (0); + return 0; } /* @@ -744,7 +407,8 @@ static int idefloppy_get_sfrp_bit(ide_drive_t *drive) */ static int ide_floppy_get_capacity(ide_drive_t *drive) { - idefloppy_floppy_t *floppy = drive->driver_data; + struct ide_disk_obj *floppy = drive->driver_data; + struct gendisk *disk = floppy->disk; struct ide_atapi_pc pc; u8 *cap_desc; u8 header_len, desc_cnt; @@ -754,11 +418,11 @@ static int ide_floppy_get_capacity(ide_drive_t *drive) drive->bios_head = drive->bios_sect = 0; floppy->blocks = 0; floppy->bs_factor = 1; - set_capacity(floppy->disk, 0); + drive->capacity64 = 0; - idefloppy_create_read_capacity_cmd(&pc); - if (idefloppy_queue_pc_tail(drive, &pc)) { - printk(KERN_ERR "ide-floppy: Can't get floppy parameters\n"); + ide_floppy_create_read_capacity_cmd(&pc); + if (ide_queue_pc_tail(drive, disk, &pc)) { + printk(KERN_ERR PFX "Can't get floppy parameters\n"); return 1; } header_len = pc.buf[3]; @@ -771,8 +435,9 @@ static int ide_floppy_get_capacity(ide_drive_t *drive) blocks = be32_to_cpup((__be32 *)&pc.buf[desc_start]); length = be16_to_cpup((__be16 *)&pc.buf[desc_start + 6]); - debug_log("Descriptor %d: %dkB, %d blocks, %d sector size\n", - i, blocks * length / 1024, blocks, length); + ide_debug_log(IDE_DBG_PROBE, "Descriptor %d: %dkB, %d blocks, " + "%d sector size\n", + i, blocks * length / 1024, blocks, length); if (i) continue; @@ -792,23 +457,26 @@ static int ide_floppy_get_capacity(ide_drive_t *drive) case CAPACITY_CURRENT: /* Normal Zip/LS-120 disks */ if (memcmp(cap_desc, &floppy->cap_desc, 8)) - printk(KERN_INFO "%s: %dkB, %d blocks, %d " - "sector size\n", drive->name, - blocks * length / 1024, blocks, length); + printk(KERN_INFO PFX "%s: %dkB, %d blocks, %d " + "sector size\n", + drive->name, blocks * length / 1024, + blocks, length); memcpy(&floppy->cap_desc, cap_desc, 8); if (!length || length % 512) { - printk(KERN_NOTICE "%s: %d bytes block size " - "not supported\n", drive->name, length); + printk(KERN_NOTICE PFX "%s: %d bytes block size" + " not supported\n", drive->name, length); } else { floppy->blocks = blocks; floppy->block_size = length; floppy->bs_factor = length / 512; if (floppy->bs_factor != 1) - printk(KERN_NOTICE "%s: warning: non " - "512 bytes block size not " - "fully supported\n", - drive->name); + printk(KERN_NOTICE PFX "%s: Warning: " + "non 512 bytes block size not " + "fully supported\n", + drive->name); + drive->capacity64 = + floppy->blocks * floppy->bs_factor; rc = 0; } break; @@ -817,221 +485,34 @@ static int ide_floppy_get_capacity(ide_drive_t *drive) * This is a KERN_ERR so it appears on screen * for the user to see */ - printk(KERN_ERR "%s: No disk in drive\n", drive->name); + printk(KERN_ERR PFX "%s: No disk in drive\n", + drive->name); break; case CAPACITY_INVALID: - printk(KERN_ERR "%s: Invalid capacity for disk " + printk(KERN_ERR PFX "%s: Invalid capacity for disk " "in drive\n", drive->name); break; } - debug_log("Descriptor 0 Code: %d\n", - pc.buf[desc_start + 4] & 0x03); + ide_debug_log(IDE_DBG_PROBE, "Descriptor 0 Code: %d\n", + pc.buf[desc_start + 4] & 0x03); } /* Clik! disk does not support get_flexible_disk_page */ if (!(drive->atapi_flags & IDE_AFLAG_CLIK_DRIVE)) (void) ide_floppy_get_flexible_disk_page(drive); - set_capacity(floppy->disk, floppy->blocks * floppy->bs_factor); return rc; } -/* - * Obtain the list of formattable capacities. - * Very similar to ide_floppy_get_capacity, except that we push the capacity - * descriptors to userland, instead of our own structures. - * - * Userland gives us the following structure: - * - * struct idefloppy_format_capacities { - * int nformats; - * struct { - * int nblocks; - * int blocksize; - * } formats[]; - * }; - * - * userland initializes nformats to the number of allocated formats[] records. - * On exit we set nformats to the number of records we've actually initialized. - */ - -static int ide_floppy_get_format_capacities(ide_drive_t *drive, int __user *arg) -{ - struct ide_atapi_pc pc; - u8 header_len, desc_cnt; - int i, blocks, length, u_array_size, u_index; - int __user *argp; - - if (get_user(u_array_size, arg)) - return (-EFAULT); - - if (u_array_size <= 0) - return (-EINVAL); - - idefloppy_create_read_capacity_cmd(&pc); - if (idefloppy_queue_pc_tail(drive, &pc)) { - printk(KERN_ERR "ide-floppy: Can't get floppy parameters\n"); - return (-EIO); - } - header_len = pc.buf[3]; - desc_cnt = header_len / 8; /* capacity descriptor of 8 bytes */ - - u_index = 0; - argp = arg + 1; - - /* - * We always skip the first capacity descriptor. That's the current - * capacity. We are interested in the remaining descriptors, the - * formattable capacities. - */ - for (i = 1; i < desc_cnt; i++) { - unsigned int desc_start = 4 + i*8; - - if (u_index >= u_array_size) - break; /* User-supplied buffer too small */ - - blocks = be32_to_cpup((__be32 *)&pc.buf[desc_start]); - length = be16_to_cpup((__be16 *)&pc.buf[desc_start + 6]); - - if (put_user(blocks, argp)) - return(-EFAULT); - ++argp; - - if (put_user(length, argp)) - return (-EFAULT); - ++argp; - - ++u_index; - } - - if (put_user(u_index, arg)) - return (-EFAULT); - return (0); -} - -/* - * Get ATAPI_FORMAT_UNIT progress indication. - * - * Userland gives a pointer to an int. The int is set to a progress - * indicator 0-65536, with 65536=100%. - * - * If the drive does not support format progress indication, we just check - * the dsc bit, and return either 0 or 65536. - */ - -static int idefloppy_get_format_progress(ide_drive_t *drive, int __user *arg) +static void ide_floppy_setup(ide_drive_t *drive) { - idefloppy_floppy_t *floppy = drive->driver_data; - struct ide_atapi_pc pc; - int progress_indication = 0x10000; - - if (floppy->srfp) { - idefloppy_create_request_sense_cmd(&pc); - if (idefloppy_queue_pc_tail(drive, &pc)) - return (-EIO); - - if (floppy->sense_key == 2 && - floppy->asc == 4 && - floppy->ascq == 4) - progress_indication = floppy->progress_indication; + struct ide_disk_obj *floppy = drive->driver_data; + u16 *id = drive->id; - /* Else assume format_unit has finished, and we're at 0x10000 */ - } else { - ide_hwif_t *hwif = drive->hwif; - unsigned long flags; - u8 stat; - - local_irq_save(flags); - stat = hwif->tp_ops->read_status(hwif); - local_irq_restore(flags); + drive->pc_callback = ide_floppy_callback; + drive->pc_update_buffers = idefloppy_update_buffers; + drive->pc_io_buffers = ide_io_buffers; - progress_indication = ((stat & SEEK_STAT) == 0) ? 0 : 0x10000; - } - if (put_user(progress_indication, arg)) - return (-EFAULT); - - return (0); -} - -static sector_t idefloppy_capacity(ide_drive_t *drive) -{ - idefloppy_floppy_t *floppy = drive->driver_data; - unsigned long capacity = floppy->blocks * floppy->bs_factor; - - return capacity; -} - -/* - * Check whether we can support a drive, based on the ATAPI IDENTIFY command - * results. - */ -static int idefloppy_identify_device(ide_drive_t *drive, struct hd_driveid *id) -{ - u8 gcw[2]; - u8 device_type, protocol, removable, drq_type, packet_size; - - *((u16 *) &gcw) = id->config; - - device_type = gcw[1] & 0x1F; - removable = (gcw[0] & 0x80) >> 7; - protocol = (gcw[1] & 0xC0) >> 6; - drq_type = (gcw[0] & 0x60) >> 5; - packet_size = gcw[0] & 0x03; - -#ifdef CONFIG_PPC - /* kludge for Apple PowerBook internal zip */ - if (device_type == 5 && - !strstr(id->model, "CD-ROM") && strstr(id->model, "ZIP")) - device_type = 0; -#endif - - if (protocol != 2) - printk(KERN_ERR "ide-floppy: Protocol (0x%02x) is not ATAPI\n", - protocol); - else if (device_type != 0) - printk(KERN_ERR "ide-floppy: Device type (0x%02x) is not set " - "to floppy\n", device_type); - else if (!removable) - printk(KERN_ERR "ide-floppy: The removable flag is not set\n"); - else if (drq_type == 3) - printk(KERN_ERR "ide-floppy: Sorry, DRQ type (0x%02x) not " - "supported\n", drq_type); - else if (packet_size != 0) - printk(KERN_ERR "ide-floppy: Packet size (0x%02x) is not 12 " - "bytes\n", packet_size); - else - return 1; - return 0; -} - -#ifdef CONFIG_IDE_PROC_FS -static void idefloppy_add_settings(ide_drive_t *drive) -{ - idefloppy_floppy_t *floppy = drive->driver_data; - - ide_add_setting(drive, "bios_cyl", SETTING_RW, TYPE_INT, 0, 1023, 1, 1, - &drive->bios_cyl, NULL); - ide_add_setting(drive, "bios_head", SETTING_RW, TYPE_BYTE, 0, 255, 1, 1, - &drive->bios_head, NULL); - ide_add_setting(drive, "bios_sect", SETTING_RW, TYPE_BYTE, 0, 63, 1, 1, - &drive->bios_sect, NULL); - ide_add_setting(drive, "ticks", SETTING_RW, TYPE_BYTE, 0, 255, 1, 1, - &floppy->ticks, NULL); -} -#else -static inline void idefloppy_add_settings(ide_drive_t *drive) { ; } -#endif - -static void idefloppy_setup(ide_drive_t *drive, idefloppy_floppy_t *floppy) -{ - u8 gcw[2]; - - *((u16 *) &gcw) = drive->id->config; - floppy->pc = floppy->pc_stack; - drive->pc_callback = ide_floppy_callback; - - if (((gcw[0] & 0x60) >> 5) == 1) - drive->atapi_flags |= IDE_AFLAG_DRQ_INTERRUPT; /* * We used to check revisions here. At this point however I'm giving up. * Just assume they are all broken, its easier. @@ -1041,10 +522,10 @@ static void idefloppy_setup(ide_drive_t *drive, idefloppy_floppy_t *floppy) * it. It should be fixed as of version 1.9, but to be on the safe side * we'll leave the limitation below for the 2.2.x tree. */ - if (!strncmp(drive->id->model, "IOMEGA ZIP 100 ATAPI", 20)) { + if (!strncmp((char *)&id[ATA_ID_PROD], "IOMEGA ZIP 100 ATAPI", 20)) { drive->atapi_flags |= IDE_AFLAG_ZIP_DRIVE; /* This value will be visible in the /proc/ide/hdx/settings */ - floppy->ticks = IDEFLOPPY_TICKS_DELAY; + drive->pc_delay = IDEFLOPPY_PC_DELAY; blk_queue_max_sectors(drive->queue, 64); } @@ -1052,406 +533,46 @@ static void idefloppy_setup(ide_drive_t *drive, idefloppy_floppy_t *floppy) * Guess what? The IOMEGA Clik! drive also needs the above fix. It makes * nasty clicking noises without it, so please don't remove this. */ - if (strncmp(drive->id->model, "IOMEGA Clik!", 11) == 0) { + if (strncmp((char *)&id[ATA_ID_PROD], "IOMEGA Clik!", 11) == 0) { blk_queue_max_sectors(drive->queue, 64); drive->atapi_flags |= IDE_AFLAG_CLIK_DRIVE; + /* IOMEGA Clik! drives do not support lock/unlock commands */ + drive->dev_flags &= ~IDE_DFLAG_DOORLOCKING; } (void) ide_floppy_get_capacity(drive); - idefloppy_add_settings(drive); -} - -static void ide_floppy_remove(ide_drive_t *drive) -{ - idefloppy_floppy_t *floppy = drive->driver_data; - struct gendisk *g = floppy->disk; - ide_proc_unregister_driver(drive, floppy->driver); + ide_proc_register_driver(drive, floppy->driver); - del_gendisk(g); - - ide_floppy_put(floppy); + drive->dev_flags |= IDE_DFLAG_ATTACH; } -static void idefloppy_cleanup_obj(struct kref *kref) +static void ide_floppy_flush(ide_drive_t *drive) { - struct ide_floppy_obj *floppy = to_ide_floppy(kref); - ide_drive_t *drive = floppy->drive; - struct gendisk *g = floppy->disk; - - drive->driver_data = NULL; - g->private_data = NULL; - put_disk(g); - kfree(floppy); } -#ifdef CONFIG_IDE_PROC_FS -static int proc_idefloppy_read_capacity(char *page, char **start, off_t off, - int count, int *eof, void *data) -{ - ide_drive_t*drive = (ide_drive_t *)data; - int len; - - len = sprintf(page, "%llu\n", (long long)idefloppy_capacity(drive)); - PROC_IDE_READ_RETURN(page, start, off, count, eof, len); -} - -static ide_proc_entry_t idefloppy_proc[] = { - { "capacity", S_IFREG|S_IRUGO, proc_idefloppy_read_capacity, NULL }, - { "geometry", S_IFREG|S_IRUGO, proc_ide_read_geometry, NULL }, - { NULL, 0, NULL, NULL } -}; -#endif /* CONFIG_IDE_PROC_FS */ - -static int ide_floppy_probe(ide_drive_t *); - -static ide_driver_t idefloppy_driver = { - .gen_driver = { - .owner = THIS_MODULE, - .name = "ide-floppy", - .bus = &ide_bus_type, - }, - .probe = ide_floppy_probe, - .remove = ide_floppy_remove, - .version = IDEFLOPPY_VERSION, - .media = ide_floppy, - .supports_dsc_overlap = 0, - .do_request = idefloppy_do_request, - .end_request = idefloppy_end_request, - .error = __ide_error, -#ifdef CONFIG_IDE_PROC_FS - .proc = idefloppy_proc, -#endif -}; - -static int idefloppy_open(struct inode *inode, struct file *filp) +static int ide_floppy_init_media(ide_drive_t *drive, struct gendisk *disk) { - struct gendisk *disk = inode->i_bdev->bd_disk; - struct ide_floppy_obj *floppy; - ide_drive_t *drive; - struct ide_atapi_pc pc; int ret = 0; - debug_log("Reached %s\n", __func__); - - floppy = ide_floppy_get(disk); - if (!floppy) - return -ENXIO; - - drive = floppy->drive; - - floppy->openers++; - - if (floppy->openers == 1) { - drive->atapi_flags &= ~IDE_AFLAG_FORMAT_IN_PROGRESS; - /* Just in case */ + if (ide_do_test_unit_ready(drive, disk)) + ide_do_start_stop(drive, disk, 1); - idefloppy_init_pc(&pc); - pc.c[0] = GPCMD_TEST_UNIT_READY; + ret = ide_floppy_get_capacity(drive); - if (idefloppy_queue_pc_tail(drive, &pc)) { - idefloppy_create_start_stop_cmd(&pc, 1); - (void) idefloppy_queue_pc_tail(drive, &pc); - } - - if (ide_floppy_get_capacity(drive) - && (filp->f_flags & O_NDELAY) == 0 - /* - * Allow O_NDELAY to open a drive without a disk, or with an - * unreadable disk, so that we can get the format capacity - * of the drive or begin the format - Sam - */ - ) { - ret = -EIO; - goto out_put_floppy; - } + set_capacity(disk, ide_gd_capacity(drive)); - if (floppy->wp && (filp->f_mode & 2)) { - ret = -EROFS; - goto out_put_floppy; - } - drive->atapi_flags |= IDE_AFLAG_MEDIA_CHANGED; - /* IOMEGA Clik! drives do not support lock/unlock commands */ - if (!(drive->atapi_flags & IDE_AFLAG_CLIK_DRIVE)) { - idefloppy_create_prevent_cmd(&pc, 1); - (void) idefloppy_queue_pc_tail(drive, &pc); - } - check_disk_change(inode->i_bdev); - } else if (drive->atapi_flags & IDE_AFLAG_FORMAT_IN_PROGRESS) { - ret = -EBUSY; - goto out_put_floppy; - } - return 0; - -out_put_floppy: - floppy->openers--; - ide_floppy_put(floppy); return ret; } -static int idefloppy_release(struct inode *inode, struct file *filp) -{ - struct gendisk *disk = inode->i_bdev->bd_disk; - struct ide_floppy_obj *floppy = ide_floppy_g(disk); - ide_drive_t *drive = floppy->drive; - struct ide_atapi_pc pc; - - debug_log("Reached %s\n", __func__); - - if (floppy->openers == 1) { - /* IOMEGA Clik! drives do not support lock/unlock commands */ - if (!(drive->atapi_flags & IDE_AFLAG_CLIK_DRIVE)) { - idefloppy_create_prevent_cmd(&pc, 0); - (void) idefloppy_queue_pc_tail(drive, &pc); - } - - drive->atapi_flags &= ~IDE_AFLAG_FORMAT_IN_PROGRESS; - } - - floppy->openers--; - - ide_floppy_put(floppy); - - return 0; -} - -static int idefloppy_getgeo(struct block_device *bdev, struct hd_geometry *geo) -{ - struct ide_floppy_obj *floppy = ide_floppy_g(bdev->bd_disk); - ide_drive_t *drive = floppy->drive; - - geo->heads = drive->bios_head; - geo->sectors = drive->bios_sect; - geo->cylinders = (u16)drive->bios_cyl; /* truncate */ - return 0; -} - -static int ide_floppy_lockdoor(ide_drive_t *drive, struct ide_atapi_pc *pc, - unsigned long arg, unsigned int cmd) -{ - idefloppy_floppy_t *floppy = drive->driver_data; - - if (floppy->openers > 1) - return -EBUSY; - - /* The IOMEGA Clik! Drive doesn't support this command - - * no room for an eject mechanism */ - if (!(drive->atapi_flags & IDE_AFLAG_CLIK_DRIVE)) { - int prevent = arg ? 1 : 0; - - if (cmd == CDROMEJECT) - prevent = 0; - - idefloppy_create_prevent_cmd(pc, prevent); - (void) idefloppy_queue_pc_tail(floppy->drive, pc); - } - - if (cmd == CDROMEJECT) { - idefloppy_create_start_stop_cmd(pc, 2); - (void) idefloppy_queue_pc_tail(floppy->drive, pc); - } - - return 0; -} - -static int ide_floppy_format_unit(idefloppy_floppy_t *floppy, - int __user *arg) -{ - struct ide_atapi_pc pc; - ide_drive_t *drive = floppy->drive; - int blocks, length, flags, err = 0; - - if (floppy->openers > 1) { - /* Don't format if someone is using the disk */ - drive->atapi_flags &= ~IDE_AFLAG_FORMAT_IN_PROGRESS; - return -EBUSY; - } - - drive->atapi_flags |= IDE_AFLAG_FORMAT_IN_PROGRESS; - - /* - * Send ATAPI_FORMAT_UNIT to the drive. - * - * Userland gives us the following structure: - * - * struct idefloppy_format_command { - * int nblocks; - * int blocksize; - * int flags; - * } ; - * - * flags is a bitmask, currently, the only defined flag is: - * - * 0x01 - verify media after format. - */ - if (get_user(blocks, arg) || - get_user(length, arg+1) || - get_user(flags, arg+2)) { - err = -EFAULT; - goto out; - } - - (void) idefloppy_get_sfrp_bit(drive); - idefloppy_create_format_unit_cmd(&pc, blocks, length, flags); - - if (idefloppy_queue_pc_tail(drive, &pc)) - err = -EIO; - -out: - if (err) - drive->atapi_flags &= ~IDE_AFLAG_FORMAT_IN_PROGRESS; - return err; -} - - -static int idefloppy_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) -{ - struct block_device *bdev = inode->i_bdev; - struct ide_floppy_obj *floppy = ide_floppy_g(bdev->bd_disk); - ide_drive_t *drive = floppy->drive; - struct ide_atapi_pc pc; - void __user *argp = (void __user *)arg; - int err; - - switch (cmd) { - case CDROMEJECT: - /* fall through */ - case CDROM_LOCKDOOR: - return ide_floppy_lockdoor(drive, &pc, arg, cmd); - case IDEFLOPPY_IOCTL_FORMAT_SUPPORTED: - return 0; - case IDEFLOPPY_IOCTL_FORMAT_GET_CAPACITY: - return ide_floppy_get_format_capacities(drive, argp); - case IDEFLOPPY_IOCTL_FORMAT_START: - if (!(file->f_mode & 2)) - return -EPERM; - - return ide_floppy_format_unit(floppy, (int __user *)arg); - case IDEFLOPPY_IOCTL_FORMAT_GET_PROGRESS: - return idefloppy_get_format_progress(drive, argp); - } - - /* - * skip SCSI_IOCTL_SEND_COMMAND (deprecated) - * and CDROM_SEND_PACKET (legacy) ioctls - */ - if (cmd != CDROM_SEND_PACKET && cmd != SCSI_IOCTL_SEND_COMMAND) - err = scsi_cmd_ioctl(file, bdev->bd_disk->queue, - bdev->bd_disk, cmd, argp); - else - err = -ENOTTY; - - if (err == -ENOTTY) - err = generic_ide_ioctl(drive, file, bdev, cmd, arg); - - return err; -} - -static int idefloppy_media_changed(struct gendisk *disk) -{ - struct ide_floppy_obj *floppy = ide_floppy_g(disk); - ide_drive_t *drive = floppy->drive; - int ret; - - /* do not scan partitions twice if this is a removable device */ - if (drive->attach) { - drive->attach = 0; - return 0; - } - ret = !!(drive->atapi_flags & IDE_AFLAG_MEDIA_CHANGED); - drive->atapi_flags &= ~IDE_AFLAG_MEDIA_CHANGED; - return ret; -} - -static int idefloppy_revalidate_disk(struct gendisk *disk) -{ - struct ide_floppy_obj *floppy = ide_floppy_g(disk); - set_capacity(disk, idefloppy_capacity(floppy->drive)); - return 0; -} - -static struct block_device_operations idefloppy_ops = { - .owner = THIS_MODULE, - .open = idefloppy_open, - .release = idefloppy_release, - .ioctl = idefloppy_ioctl, - .getgeo = idefloppy_getgeo, - .media_changed = idefloppy_media_changed, - .revalidate_disk = idefloppy_revalidate_disk +const struct ide_disk_ops ide_atapi_disk_ops = { + .check = ide_check_atapi_device, + .get_capacity = ide_floppy_get_capacity, + .setup = ide_floppy_setup, + .flush = ide_floppy_flush, + .init_media = ide_floppy_init_media, + .set_doorlock = ide_set_media_lock, + .do_request = ide_floppy_do_request, + .end_request = ide_floppy_end_request, + .ioctl = ide_floppy_ioctl, }; - -static int ide_floppy_probe(ide_drive_t *drive) -{ - idefloppy_floppy_t *floppy; - struct gendisk *g; - - if (!strstr("ide-floppy", drive->driver_req)) - goto failed; - if (!drive->present) - goto failed; - if (drive->media != ide_floppy) - goto failed; - if (!idefloppy_identify_device(drive, drive->id)) { - printk(KERN_ERR "ide-floppy: %s: not supported by this version" - " of ide-floppy\n", drive->name); - goto failed; - } - floppy = kzalloc(sizeof(idefloppy_floppy_t), GFP_KERNEL); - if (!floppy) { - printk(KERN_ERR "ide-floppy: %s: Can't allocate a floppy" - " structure\n", drive->name); - goto failed; - } - - g = alloc_disk(1 << PARTN_BITS); - if (!g) - goto out_free_floppy; - - ide_init_disk(g, drive); - - ide_proc_register_driver(drive, &idefloppy_driver); - - kref_init(&floppy->kref); - - floppy->drive = drive; - floppy->driver = &idefloppy_driver; - floppy->disk = g; - - g->private_data = &floppy->driver; - - drive->driver_data = floppy; - - idefloppy_setup(drive, floppy); - - g->minors = 1 << PARTN_BITS; - g->driverfs_dev = &drive->gendev; - g->flags = drive->removable ? GENHD_FL_REMOVABLE : 0; - g->fops = &idefloppy_ops; - drive->attach = 1; - add_disk(g); - return 0; - -out_free_floppy: - kfree(floppy); -failed: - return -ENODEV; -} - -static void __exit idefloppy_exit(void) -{ - driver_unregister(&idefloppy_driver.gen_driver); -} - -static int __init idefloppy_init(void) -{ - printk("ide-floppy driver " IDEFLOPPY_VERSION "\n"); - return driver_register(&idefloppy_driver.gen_driver); -} - -MODULE_ALIAS("ide:*m-floppy*"); -module_init(idefloppy_init); -module_exit(idefloppy_exit); -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("ATAPI FLOPPY Driver"); - |