1 files changed, 85 insertions, 197 deletions

diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index ecacc008fda..1c36a8e83d3 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -426,9 +426,6 @@ void ide_map_sg(ide_drive_t *drive, struct request *rq)
 	ide_hwif_t *hwif = drive->hwif;
 	struct scatterlist *sg = hwif->sg_table;
 
-	if (hwif->sg_mapped)	/* needed by ide-scsi */
-		return;
-
 	if (rq->cmd_type != REQ_TYPE_ATA_TASKFILE) {
 		hwif->sg_nents = blk_rq_map_sg(drive->queue, rq, sg);
 	} else {
@@ -667,85 +664,10 @@ void ide_stall_queue (ide_drive_t *drive, unsigned long timeout)
 	drive->sleep = timeout + jiffies;
 	drive->dev_flags |= IDE_DFLAG_SLEEPING;
 }
-
 EXPORT_SYMBOL(ide_stall_queue);
 
-#define WAKEUP(drive)	((drive)->service_start + 2 * (drive)->service_time)
-
-/**
- *	choose_drive		-	select a drive to service
- *	@hwgroup: hardware group to select on
- *
- *	choose_drive() selects the next drive which will be serviced.
- *	This is necessary because the IDE layer can't issue commands
- *	to both drives on the same cable, unlike SCSI.
- */
- 
-static inline ide_drive_t *choose_drive (ide_hwgroup_t *hwgroup)
-{
-	ide_drive_t *drive, *best;
-
-repeat:	
-	best = NULL;
-	drive = hwgroup->drive;
-
-	/*
-	 * drive is doing pre-flush, ordered write, post-flush sequence. even
-	 * though that is 3 requests, it must be seen as a single transaction.
-	 * we must not preempt this drive until that is complete
-	 */
-	if (blk_queue_flushing(drive->queue)) {
-		/*
-		 * small race where queue could get replugged during
-		 * the 3-request flush cycle, just yank the plug since
-		 * we want it to finish asap
-		 */
-		blk_remove_plug(drive->queue);
-		return drive;
-	}
-
-	do {
-		u8 dev_s = !!(drive->dev_flags & IDE_DFLAG_SLEEPING);
-		u8 best_s = (best && !!(best->dev_flags & IDE_DFLAG_SLEEPING));
-
-		if ((dev_s == 0 || time_after_eq(jiffies, drive->sleep)) &&
-		    !elv_queue_empty(drive->queue)) {
-			if (best == NULL ||
-			    (dev_s && (best_s == 0 || time_before(drive->sleep, best->sleep))) ||
-			    (best_s == 0 && time_before(WAKEUP(drive), WAKEUP(best)))) {
-				if (!blk_queue_plugged(drive->queue))
-					best = drive;
-			}
-		}
-	} while ((drive = drive->next) != hwgroup->drive);
-
-	if (best && (best->dev_flags & IDE_DFLAG_NICE1) &&
-	    (best->dev_flags & IDE_DFLAG_SLEEPING) == 0 &&
-	    best != hwgroup->drive && best->service_time > WAIT_MIN_SLEEP) {
-		long t = (signed long)(WAKEUP(best) - jiffies);
-		if (t >= WAIT_MIN_SLEEP) {
-		/*
-		 * We *may* have some time to spare, but first let's see if
-		 * someone can potentially benefit from our nice mood today..
-		 */
-			drive = best->next;
-			do {
-				if ((drive->dev_flags & IDE_DFLAG_SLEEPING) == 0
-				 && time_before(jiffies - best->service_time, WAKEUP(drive))
-				 && time_before(WAKEUP(drive), jiffies + t))
-				{
-					ide_stall_queue(best, min_t(long, t, 10 * WAIT_MIN_SLEEP));
-					goto repeat;
-				}
-			} while ((drive = drive->next) != best);
-		}
-	}
-	return best;
-}
-
 /*
  * Issue a new request to a drive from hwgroup
- * Caller must have already done spin_lock_irqsave(&hwgroup->lock, ..);
  *
  * A hwgroup is a serialized group of IDE interfaces.  Usually there is
  * exactly one hwif (interface) per hwgroup, but buggy controllers (eg. CMD640)
@@ -757,8 +679,7 @@ repeat:
  * possibly along with many other devices.  This is especially common in
  * PCI-based systems with off-board IDE controller cards.
  *
- * The IDE driver uses a per-hwgroup spinlock to protect
- * access to the request queues, and to protect the hwgroup->busy flag.
+ * The IDE driver uses a per-hwgroup lock to protect the hwgroup->busy flag.
  *
  * The first thread into the driver for a particular hwgroup sets the
  * hwgroup->busy flag to indicate that this hwgroup is now active,
@@ -778,69 +699,41 @@ repeat:
  * the driver.  This makes the driver much more friendlier to shared IRQs
  * than previous designs, while remaining 100% (?) SMP safe and capable.
  */
-static void ide_do_request (ide_hwgroup_t *hwgroup, int masked_irq)
+void do_ide_request(struct request_queue *q)
 {
-	ide_drive_t	*drive;
-	ide_hwif_t	*hwif;
+	ide_drive_t	*drive = q->queuedata;
+	ide_hwif_t	*hwif = drive->hwif;
+	ide_hwgroup_t	*hwgroup = hwif->hwgroup;
 	struct request	*rq;
 	ide_startstop_t	startstop;
-	int             loops = 0;
-
-	/* caller must own hwgroup->lock */
-	BUG_ON(!irqs_disabled());
-
-	while (!hwgroup->busy) {
-		hwgroup->busy = 1;
-		/* for atari only */
-		ide_get_lock(ide_intr, hwgroup);
-		drive = choose_drive(hwgroup);
-		if (drive == NULL) {
-			int sleeping = 0;
-			unsigned long sleep = 0; /* shut up, gcc */
-			hwgroup->rq = NULL;
-			drive = hwgroup->drive;
-			do {
-				if ((drive->dev_flags & IDE_DFLAG_SLEEPING) &&
-				    (sleeping == 0 ||
-				     time_before(drive->sleep, sleep))) {
-					sleeping = 1;
-					sleep = drive->sleep;
-				}
-			} while ((drive = drive->next) != hwgroup->drive);
-			if (sleeping) {
+
+	/*
+	 * drive is doing pre-flush, ordered write, post-flush sequence. even
+	 * though that is 3 requests, it must be seen as a single transaction.
+	 * we must not preempt this drive until that is complete
+	 */
+	if (blk_queue_flushing(q))
 		/*
-		 * Take a short snooze, and then wake up this hwgroup again.
-		 * This gives other hwgroups on the same a chance to
-		 * play fairly with us, just in case there are big differences
-		 * in relative throughputs.. don't want to hog the cpu too much.
+		 * small race where queue could get replugged during
+		 * the 3-request flush cycle, just yank the plug since
+		 * we want it to finish asap
 		 */
-				if (time_before(sleep, jiffies + WAIT_MIN_SLEEP))
-					sleep = jiffies + WAIT_MIN_SLEEP;
-#if 1
-				if (timer_pending(&hwgroup->timer))
-					printk(KERN_CRIT "ide_set_handler: timer already active\n");
-#endif
-				/* so that ide_timer_expiry knows what to do */
-				hwgroup->sleeping = 1;
-				hwgroup->req_gen_timer = hwgroup->req_gen;
-				mod_timer(&hwgroup->timer, sleep);
-				/* we purposely leave hwgroup->busy==1
-				 * while sleeping */
-			} else {
-				/* Ugly, but how can we sleep for the lock
-				 * otherwise? perhaps from tq_disk?
-				 */
+		blk_remove_plug(q);
 
-				/* for atari only */
-				ide_release_lock();
-				hwgroup->busy = 0;
-			}
+	spin_unlock_irq(q->queue_lock);
+	spin_lock_irq(&hwgroup->lock);
+
+	if (!ide_lock_hwgroup(hwgroup)) {
+repeat:
+		hwgroup->rq = NULL;
 
-			/* no more work for this hwgroup (for now) */
-			return;
+		if (drive->dev_flags & IDE_DFLAG_SLEEPING) {
+			if (time_before(drive->sleep, jiffies)) {
+				ide_unlock_hwgroup(hwgroup);
+				goto plug_device;
+			}
 		}
-	again:
-		hwif = HWIF(drive);
+
 		if (hwif != hwgroup->hwif) {
 			/*
 			 * set nIEN for previous hwif, drives in the
@@ -852,16 +745,20 @@ static void ide_do_request (ide_hwgroup_t *hwgroup, int masked_irq)
 		hwgroup->hwif = hwif;
 		hwgroup->drive = drive;
 		drive->dev_flags &= ~(IDE_DFLAG_SLEEPING | IDE_DFLAG_PARKED);
-		drive->service_start = jiffies;
 
+		spin_unlock_irq(&hwgroup->lock);
+		spin_lock_irq(q->queue_lock);
 		/*
 		 * we know that the queue isn't empty, but this can happen
 		 * if the q->prep_rq_fn() decides to kill a request
 		 */
 		rq = elv_next_request(drive->queue);
+		spin_unlock_irq(q->queue_lock);
+		spin_lock_irq(&hwgroup->lock);
+
 		if (!rq) {
-			hwgroup->busy = 0;
-			break;
+			ide_unlock_hwgroup(hwgroup);
+			goto out;
 		}
 
 		/*
@@ -876,53 +773,36 @@ static void ide_do_request (ide_hwgroup_t *hwgroup, int masked_irq)
 		 * though. I hope that doesn't happen too much, hopefully not
 		 * unless the subdriver triggers such a thing in its own PM
 		 * state machine.
-		 *
-		 * We count how many times we loop here to make sure we service
-		 * all drives in the hwgroup without looping for ever
 		 */
 		if ((drive->dev_flags & IDE_DFLAG_BLOCKED) &&
 		    blk_pm_request(rq) == 0 &&
 		    (rq->cmd_flags & REQ_PREEMPT) == 0) {
-			drive = drive->next ? drive->next : hwgroup->drive;
-			if (loops++ < 4 && !blk_queue_plugged(drive->queue))
-				goto again;
-			/* We clear busy, there should be no pending ATA command at this point. */
-			hwgroup->busy = 0;
-			break;
+			/* there should be no pending command at this point */
+			ide_unlock_hwgroup(hwgroup);
+			goto plug_device;
 		}
 
 		hwgroup->rq = rq;
 
-		/*
-		 * Some systems have trouble with IDE IRQs arriving while
-		 * the driver is still setting things up.  So, here we disable
-		 * the IRQ used by this interface while the request is being started.
-		 * This may look bad at first, but pretty much the same thing
-		 * happens anyway when any interrupt comes in, IDE or otherwise
-		 *  -- the kernel masks the IRQ while it is being handled.
-		 */
-		if (masked_irq != IDE_NO_IRQ && hwif->irq != masked_irq)
-			disable_irq_nosync(hwif->irq);
-		spin_unlock(&hwgroup->lock);
-		local_irq_enable_in_hardirq();
-			/* allow other IRQs while we start this request */
+		spin_unlock_irq(&hwgroup->lock);
 		startstop = start_request(drive, rq);
 		spin_lock_irq(&hwgroup->lock);
-		if (masked_irq != IDE_NO_IRQ && hwif->irq != masked_irq)
-			enable_irq(hwif->irq);
+
 		if (startstop == ide_stopped)
-			hwgroup->busy = 0;
-	}
-}
+			goto repeat;
+	} else
+		goto plug_device;
+out:
+	spin_unlock_irq(&hwgroup->lock);
+	spin_lock_irq(q->queue_lock);
+	return;
 
-/*
- * Passes the stuff to ide_do_request
- */
-void do_ide_request(struct request_queue *q)
-{
-	ide_drive_t *drive = q->queuedata;
+plug_device:
+	spin_unlock_irq(&hwgroup->lock);
+	spin_lock_irq(q->queue_lock);
 
-	ide_do_request(HWGROUP(drive), IDE_NO_IRQ);
+	if (!elv_queue_empty(q))
+		blk_plug_device(q);
 }
 
 /*
@@ -983,6 +863,17 @@ out:
 	return ret;
 }
 
+static void ide_plug_device(ide_drive_t *drive)
+{
+	struct request_queue *q = drive->queue;
+	unsigned long flags;
+
+	spin_lock_irqsave(q->queue_lock, flags);
+	if (!elv_queue_empty(q))
+		blk_plug_device(q);
+	spin_unlock_irqrestore(q->queue_lock, flags);
+}
+
 /**
  *	ide_timer_expiry	-	handle lack of an IDE interrupt
  *	@data: timer callback magic (hwgroup)
@@ -1000,10 +891,12 @@ out:
 void ide_timer_expiry (unsigned long data)
 {
 	ide_hwgroup_t	*hwgroup = (ide_hwgroup_t *) data;
+	ide_drive_t	*uninitialized_var(drive);
 	ide_handler_t	*handler;
 	ide_expiry_t	*expiry;
 	unsigned long	flags;
 	unsigned long	wait = -1;
+	int		plug_device = 0;
 
 	spin_lock_irqsave(&hwgroup->lock, flags);
 
@@ -1015,22 +908,15 @@ void ide_timer_expiry (unsigned long data)
 		 * or we were "sleeping" to give other devices a chance.
 		 * Either way, we don't really want to complain about anything.
 		 */
-		if (hwgroup->sleeping) {
-			hwgroup->sleeping = 0;
-			hwgroup->busy = 0;
-		}
 	} else {
-		ide_drive_t *drive = hwgroup->drive;
+		drive = hwgroup->drive;
 		if (!drive) {
 			printk(KERN_ERR "ide_timer_expiry: hwgroup->drive was NULL\n");
 			hwgroup->handler = NULL;
 		} else {
 			ide_hwif_t *hwif;
 			ide_startstop_t startstop = ide_stopped;
-			if (!hwgroup->busy) {
-				hwgroup->busy = 1;	/* paranoia */
-				printk(KERN_ERR "%s: ide_timer_expiry: hwgroup->busy was 0 ??\n", drive->name);
-			}
+
 			if ((expiry = hwgroup->expiry) != NULL) {
 				/* continue */
 				if ((wait = expiry(drive)) > 0) {
@@ -1071,15 +957,18 @@ void ide_timer_expiry (unsigned long data)
 					ide_error(drive, "irq timeout",
 						  hwif->tp_ops->read_status(hwif));
 			}
-			drive->service_time = jiffies - drive->service_start;
 			spin_lock_irq(&hwgroup->lock);
 			enable_irq(hwif->irq);
-			if (startstop == ide_stopped)
-				hwgroup->busy = 0;
+			if (startstop == ide_stopped) {
+				ide_unlock_hwgroup(hwgroup);
+				plug_device = 1;
+			}
 		}
 	}
-	ide_do_request(hwgroup, IDE_NO_IRQ);
 	spin_unlock_irqrestore(&hwgroup->lock, flags);
+
+	if (plug_device)
+		ide_plug_device(drive);
 }
 
 /**
@@ -1173,10 +1062,11 @@ irqreturn_t ide_intr (int irq, void *dev_id)
 	unsigned long flags;
 	ide_hwgroup_t *hwgroup = (ide_hwgroup_t *)dev_id;
 	ide_hwif_t *hwif = hwgroup->hwif;
-	ide_drive_t *drive;
+	ide_drive_t *uninitialized_var(drive);
 	ide_handler_t *handler;
 	ide_startstop_t startstop;
 	irqreturn_t irq_ret = IRQ_NONE;
+	int plug_device = 0;
 
 	spin_lock_irqsave(&hwgroup->lock, flags);
 
@@ -1241,10 +1131,6 @@ irqreturn_t ide_intr (int irq, void *dev_id)
 		 */
 		goto out;
 
-	if (!hwgroup->busy) {
-		hwgroup->busy = 1;	/* paranoia */
-		printk(KERN_ERR "%s: ide_intr: hwgroup->busy was 0 ??\n", drive->name);
-	}
 	hwgroup->handler = NULL;
 	hwgroup->req_gen++;
 	del_timer(&hwgroup->timer);
@@ -1267,20 +1153,22 @@ irqreturn_t ide_intr (int irq, void *dev_id)
 	 * same irq as is currently being serviced here, and Linux
 	 * won't allow another of the same (on any CPU) until we return.
 	 */
-	drive->service_time = jiffies - drive->service_start;
 	if (startstop == ide_stopped) {
 		if (hwgroup->handler == NULL) {	/* paranoia */
-			hwgroup->busy = 0;
-			ide_do_request(hwgroup, hwif->irq);
-		} else {
-			printk(KERN_ERR "%s: ide_intr: huh? expected NULL handler "
-				"on exit\n", drive->name);
-		}
+			ide_unlock_hwgroup(hwgroup);
+			plug_device = 1;
+		} else
+			printk(KERN_ERR "%s: %s: huh? expected NULL handler "
+					"on exit\n", __func__, drive->name);
 	}
 out_handled:
 	irq_ret = IRQ_HANDLED;
 out:
 	spin_unlock_irqrestore(&hwgroup->lock, flags);
+
+	if (plug_device)
+		ide_plug_device(drive);
+
 	return irq_ret;
 }