diff options
Diffstat (limited to 'drivers/ide/ide-io.c')
-rw-r--r-- | drivers/ide/ide-io.c | 117 |
1 files changed, 73 insertions, 44 deletions
diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index a896a283f27..1c51949833b 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -40,6 +40,7 @@ #include <linux/pci.h> #include <linux/delay.h> #include <linux/ide.h> +#include <linux/hdreg.h> #include <linux/completion.h> #include <linux/reboot.h> #include <linux/cdrom.h> @@ -183,18 +184,18 @@ static ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request * if (drive->media != ide_disk) break; /* Not supported? Switch to next step now. */ - if (!drive->wcache || !ide_id_has_flush_cache(drive->id)) { + if (!drive->wcache || ata_id_flush_enabled(drive->id) == 0) { ide_complete_power_step(drive, rq, 0, 0); return ide_stopped; } - if (ide_id_has_flush_cache_ext(drive->id)) - args->tf.command = WIN_FLUSH_CACHE_EXT; + if (ata_id_flush_ext_enabled(drive->id)) + args->tf.command = ATA_CMD_FLUSH_EXT; else - args->tf.command = WIN_FLUSH_CACHE; + args->tf.command = ATA_CMD_FLUSH; goto out_do_tf; case idedisk_pm_standby: /* Suspend step 2 (standby) */ - args->tf.command = WIN_STANDBYNOW1; + args->tf.command = ATA_CMD_STANDBYNOW1; goto out_do_tf; case idedisk_pm_restore_pio: /* Resume step 1 (restore PIO) */ @@ -209,7 +210,7 @@ static ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request * return ide_stopped; case idedisk_pm_idle: /* Resume step 2 (idle) */ - args->tf.command = WIN_IDLEIMMEDIATE; + args->tf.command = ATA_CMD_IDLEIMMEDIATE; goto out_do_tf; case ide_pm_restore_dma: /* Resume step 3 (restore DMA) */ @@ -322,7 +323,7 @@ void ide_end_drive_cmd (ide_drive_t *drive, u8 stat, u8 err) ide_task_t *task = (ide_task_t *)rq->special; if (rq->errors == 0) - rq->errors = !OK_STAT(stat, READY_STAT, BAD_STAT); + rq->errors = !OK_STAT(stat, ATA_DRDY, BAD_STAT); if (task) { struct ide_taskfile *tf = &task->tf; @@ -373,29 +374,29 @@ static ide_startstop_t ide_ata_error(ide_drive_t *drive, struct request *rq, u8 { ide_hwif_t *hwif = drive->hwif; - if (stat & BUSY_STAT || ((stat & WRERR_STAT) && !drive->nowerr)) { + if ((stat & ATA_BUSY) || ((stat & ATA_DF) && !drive->nowerr)) { /* other bits are useless when BUSY */ rq->errors |= ERROR_RESET; - } else if (stat & ERR_STAT) { + } else if (stat & ATA_ERR) { /* err has different meaning on cdrom and tape */ - if (err == ABRT_ERR) { + if (err == ATA_ABORTED) { if (drive->select.b.lba && - /* some newer drives don't support WIN_SPECIFY */ - hwif->tp_ops->read_status(hwif) == WIN_SPECIFY) + /* some newer drives don't support ATA_CMD_INIT_DEV_PARAMS */ + hwif->tp_ops->read_status(hwif) == ATA_CMD_INIT_DEV_PARAMS) return ide_stopped; } else if ((err & BAD_CRC) == BAD_CRC) { /* UDMA crc error, just retry the operation */ drive->crc_count++; - } else if (err & (BBD_ERR | ECC_ERR)) { + } else if (err & (ATA_BBK | ATA_UNC)) { /* retries won't help these */ rq->errors = ERROR_MAX; - } else if (err & TRK0_ERR) { + } else if (err & ATA_TRK0NF) { /* help it find track zero */ rq->errors |= ERROR_RECAL; } } - if ((stat & DRQ_STAT) && rq_data_dir(rq) == READ && + if ((stat & ATA_DRQ) && rq_data_dir(rq) == READ && (hwif->host_flags & IDE_HFLAG_ERROR_STOPS_FIFO) == 0) { int nsect = drive->mult_count ? drive->mult_count : 1; @@ -407,7 +408,7 @@ static ide_startstop_t ide_ata_error(ide_drive_t *drive, struct request *rq, u8 return ide_stopped; } - if (hwif->tp_ops->read_status(hwif) & (BUSY_STAT | DRQ_STAT)) + if (hwif->tp_ops->read_status(hwif) & (ATA_BUSY | ATA_DRQ)) rq->errors |= ERROR_RESET; if ((rq->errors & ERROR_RESET) == ERROR_RESET) { @@ -427,16 +428,16 @@ static ide_startstop_t ide_atapi_error(ide_drive_t *drive, struct request *rq, u { ide_hwif_t *hwif = drive->hwif; - if (stat & BUSY_STAT || ((stat & WRERR_STAT) && !drive->nowerr)) { + if ((stat & ATA_BUSY) || ((stat & ATA_DF) && !drive->nowerr)) { /* other bits are useless when BUSY */ rq->errors |= ERROR_RESET; } else { /* add decoding error stuff */ } - if (hwif->tp_ops->read_status(hwif) & (BUSY_STAT | DRQ_STAT)) + if (hwif->tp_ops->read_status(hwif) & (ATA_BUSY | ATA_DRQ)) /* force an abort */ - hwif->tp_ops->exec_command(hwif, WIN_IDLEIMMEDIATE); + hwif->tp_ops->exec_command(hwif, ATA_CMD_IDLEIMMEDIATE); if (rq->errors >= ERROR_MAX) { ide_kill_rq(drive, rq); @@ -509,19 +510,19 @@ static void ide_tf_set_specify_cmd(ide_drive_t *drive, struct ide_taskfile *tf) tf->lbam = drive->cyl; tf->lbah = drive->cyl >> 8; tf->device = ((drive->head - 1) | drive->select.all) & ~ATA_LBA; - tf->command = WIN_SPECIFY; + tf->command = ATA_CMD_INIT_DEV_PARAMS; } static void ide_tf_set_restore_cmd(ide_drive_t *drive, struct ide_taskfile *tf) { tf->nsect = drive->sect; - tf->command = WIN_RESTORE; + tf->command = ATA_CMD_RESTORE; } static void ide_tf_set_setmult_cmd(ide_drive_t *drive, struct ide_taskfile *tf) { tf->nsect = drive->mult_req; - tf->command = WIN_SETMULT; + tf->command = ATA_CMD_SET_MULTI; } static ide_startstop_t ide_disk_special(ide_drive_t *drive) @@ -540,8 +541,6 @@ static ide_startstop_t ide_disk_special(ide_drive_t *drive) ide_tf_set_restore_cmd(drive, &args.tf); } else if (s->b.set_multmode) { s->b.set_multmode = 0; - if (drive->mult_req > drive->id->max_multsect) - drive->mult_req = drive->id->max_multsect; ide_tf_set_setmult_cmd(drive, &args.tf); } else if (s->all) { int special = s->all; @@ -586,9 +585,10 @@ static int set_pio_mode_abuse(ide_hwif_t *hwif, u8 req_pio) * do_special - issue some special commands * @drive: drive the command is for * - * do_special() is used to issue WIN_SPECIFY, WIN_RESTORE, and WIN_SETMULT - * commands to a drive. It used to do much more, but has been scaled - * back. + * do_special() is used to issue ATA_CMD_INIT_DEV_PARAMS, + * ATA_CMD_RESTORE and ATA_CMD_SET_MULTI commands to a drive. + * + * It used to do much more, but has been scaled back. */ static ide_startstop_t do_special (ide_drive_t *drive) @@ -716,9 +716,49 @@ static ide_startstop_t execute_drive_cmd (ide_drive_t *drive, return ide_stopped; } +int ide_devset_execute(ide_drive_t *drive, const struct ide_devset *setting, + int arg) +{ + struct request_queue *q = drive->queue; + struct request *rq; + int ret = 0; + + if (!(setting->flags & DS_SYNC)) + return setting->set(drive, arg); + + rq = blk_get_request(q, READ, GFP_KERNEL); + if (!rq) + return -ENOMEM; + + rq->cmd_type = REQ_TYPE_SPECIAL; + rq->cmd_len = 5; + rq->cmd[0] = REQ_DEVSET_EXEC; + *(int *)&rq->cmd[1] = arg; + rq->special = setting->set; + + if (blk_execute_rq(q, NULL, rq, 0)) + ret = rq->errors; + blk_put_request(rq); + + return ret; +} +EXPORT_SYMBOL_GPL(ide_devset_execute); + static ide_startstop_t ide_special_rq(ide_drive_t *drive, struct request *rq) { switch (rq->cmd[0]) { + case REQ_DEVSET_EXEC: + { + int err, (*setfunc)(ide_drive_t *, int) = rq->special; + + err = setfunc(drive, *(int *)&rq->cmd[1]); + if (err) + rq->errors = err; + else + err = 1; + ide_end_request(drive, err, 0); + return ide_stopped; + } case REQ_DRIVE_RESET: return ide_do_reset(drive); default: @@ -766,9 +806,7 @@ static void ide_check_pm_state(ide_drive_t *drive, struct request *rq) * start_request - start of I/O and command issuing for IDE * * start_request() initiates handling of a new I/O request. It - * accepts commands and I/O (read/write) requests. It also does - * the final remapping for weird stuff like EZDrive. Once - * device mapper can work sector level the EZDrive stuff can go away + * accepts commands and I/O (read/write) requests. * * FIXME: this function needs a rename */ @@ -776,7 +814,6 @@ static void ide_check_pm_state(ide_drive_t *drive, struct request *rq) static ide_startstop_t start_request (ide_drive_t *drive, struct request *rq) { ide_startstop_t startstop; - sector_t block; BUG_ON(!blk_rq_started(rq)); @@ -791,21 +828,12 @@ static ide_startstop_t start_request (ide_drive_t *drive, struct request *rq) goto kill_rq; } - block = rq->sector; - if (blk_fs_request(rq) && - (drive->media == ide_disk || drive->media == ide_floppy)) { - block += drive->sect0; - } - /* Yecch - this will shift the entire interval, - possibly killing some innocent following sector */ - if (block == 0 && drive->remap_0_to_1 == 1) - block = 1; /* redirect MBR access to EZ-Drive partn table */ - if (blk_pm_request(rq)) ide_check_pm_state(drive, rq); SELECT_DRIVE(drive); - if (ide_wait_stat(&startstop, drive, drive->ready_stat, BUSY_STAT|DRQ_STAT, WAIT_READY)) { + if (ide_wait_stat(&startstop, drive, drive->ready_stat, + ATA_BUSY | ATA_DRQ, WAIT_READY)) { printk(KERN_ERR "%s: drive not ready for command\n", drive->name); return startstop; } @@ -844,7 +872,8 @@ static ide_startstop_t start_request (ide_drive_t *drive, struct request *rq) return ide_special_rq(drive, rq); drv = *(ide_driver_t **)rq->rq_disk->private_data; - return drv->do_request(drive, rq, block); + + return drv->do_request(drive, rq, rq->sector); } return do_special(drive); kill_rq: @@ -1325,7 +1354,7 @@ static void unexpected_intr (int irq, ide_hwgroup_t *hwgroup) if (hwif->irq == irq) { stat = hwif->tp_ops->read_status(hwif); - if (!OK_STAT(stat, READY_STAT, BAD_STAT)) { + if (!OK_STAT(stat, ATA_DRDY, BAD_STAT)) { /* Try to not flood the console with msgs */ static unsigned long last_msgtime, count; ++count; |