1 files changed, 2 insertions, 297 deletions

diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index cf6c3036ae7..e0cfa2d2acc 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -446,8 +446,8 @@ int ide_config_drive_speed(ide_drive_t *drive, u8 speed)
  *
  * See also ide_execute_command
  */
-static void __ide_set_handler (ide_drive_t *drive, ide_handler_t *handler,
-		      unsigned int timeout, ide_expiry_t *expiry)
+void __ide_set_handler(ide_drive_t *drive, ide_handler_t *handler,
+		       unsigned int timeout, ide_expiry_t *expiry)
 {
 	ide_hwif_t *hwif = drive->hwif;
 
@@ -517,301 +517,6 @@ void ide_execute_pkt_cmd(ide_drive_t *drive)
 }
 EXPORT_SYMBOL_GPL(ide_execute_pkt_cmd);
 
-static inline void ide_complete_drive_reset(ide_drive_t *drive, int err)
-{
-	struct request *rq = drive->hwif->rq;
-
-	if (rq && blk_special_request(rq) && rq->cmd[0] == REQ_DRIVE_RESET)
-		ide_end_request(drive, err ? err : 1, 0);
-}
-
-/* needed below */
-static ide_startstop_t do_reset1(ide_drive_t *, int);
-
-/*
- * atapi_reset_pollfunc() gets invoked to poll the interface for completion
- * every 50ms during an atapi drive reset operation.  If the drive has not yet
- * responded, and we have not yet hit our maximum waiting time, then the timer
- * is restarted for another 50ms.
- */
-static ide_startstop_t atapi_reset_pollfunc(ide_drive_t *drive)
-{
-	ide_hwif_t *hwif = drive->hwif;
-	u8 stat;
-
-	SELECT_DRIVE(drive);
-	udelay(10);
-	stat = hwif->tp_ops->read_status(hwif);
-
-	if (OK_STAT(stat, 0, ATA_BUSY))
-		printk(KERN_INFO "%s: ATAPI reset complete\n", drive->name);
-	else {
-		if (time_before(jiffies, hwif->poll_timeout)) {
-			ide_set_handler(drive, &atapi_reset_pollfunc, HZ/20,
-					NULL);
-			/* continue polling */
-			return ide_started;
-		}
-		/* end of polling */
-		hwif->polling = 0;
-		printk(KERN_ERR "%s: ATAPI reset timed-out, status=0x%02x\n",
-			drive->name, stat);
-		/* do it the old fashioned way */
-		return do_reset1(drive, 1);
-	}
-	/* done polling */
-	hwif->polling = 0;
-	ide_complete_drive_reset(drive, 0);
-	return ide_stopped;
-}
-
-static void ide_reset_report_error(ide_hwif_t *hwif, u8 err)
-{
-	static const char *err_master_vals[] =
-		{ NULL, "passed", "formatter device error",
-		  "sector buffer error", "ECC circuitry error",
-		  "controlling MPU error" };
-
-	u8 err_master = err & 0x7f;
-
-	printk(KERN_ERR "%s: reset: master: ", hwif->name);
-	if (err_master && err_master < 6)
-		printk(KERN_CONT "%s", err_master_vals[err_master]);
-	else
-		printk(KERN_CONT "error (0x%02x?)", err);
-	if (err & 0x80)
-		printk(KERN_CONT "; slave: failed");
-	printk(KERN_CONT "\n");
-}
-
-/*
- * reset_pollfunc() gets invoked to poll the interface for completion every 50ms
- * during an ide reset operation. If the drives have not yet responded,
- * and we have not yet hit our maximum waiting time, then the timer is restarted
- * for another 50ms.
- */
-static ide_startstop_t reset_pollfunc(ide_drive_t *drive)
-{
-	ide_hwif_t *hwif = drive->hwif;
-	const struct ide_port_ops *port_ops = hwif->port_ops;
-	u8 tmp;
-	int err = 0;
-
-	if (port_ops && port_ops->reset_poll) {
-		err = port_ops->reset_poll(drive);
-		if (err) {
-			printk(KERN_ERR "%s: host reset_poll failure for %s.\n",
-				hwif->name, drive->name);
-			goto out;
-		}
-	}
-
-	tmp = hwif->tp_ops->read_status(hwif);
-
-	if (!OK_STAT(tmp, 0, ATA_BUSY)) {
-		if (time_before(jiffies, hwif->poll_timeout)) {
-			ide_set_handler(drive, &reset_pollfunc, HZ/20, NULL);
-			/* continue polling */
-			return ide_started;
-		}
-		printk(KERN_ERR "%s: reset timed-out, status=0x%02x\n",
-			hwif->name, tmp);
-		drive->failures++;
-		err = -EIO;
-	} else  {
-		tmp = ide_read_error(drive);
-
-		if (tmp == 1) {
-			printk(KERN_INFO "%s: reset: success\n", hwif->name);
-			drive->failures = 0;
-		} else {
-			ide_reset_report_error(hwif, tmp);
-			drive->failures++;
-			err = -EIO;
-		}
-	}
-out:
-	hwif->polling = 0;	/* done polling */
-	ide_complete_drive_reset(drive, err);
-	return ide_stopped;
-}
-
-static void ide_disk_pre_reset(ide_drive_t *drive)
-{
-	int legacy = (drive->id[ATA_ID_CFS_ENABLE_2] & 0x0400) ? 0 : 1;
-
-	drive->special.all = 0;
-	drive->special.b.set_geometry = legacy;
-	drive->special.b.recalibrate  = legacy;
-
-	drive->mult_count = 0;
-	drive->dev_flags &= ~IDE_DFLAG_PARKED;
-
-	if ((drive->dev_flags & IDE_DFLAG_KEEP_SETTINGS) == 0 &&
-	    (drive->dev_flags & IDE_DFLAG_USING_DMA) == 0)
-		drive->mult_req = 0;
-
-	if (drive->mult_req != drive->mult_count)
-		drive->special.b.set_multmode = 1;
-}
-
-static void pre_reset(ide_drive_t *drive)
-{
-	const struct ide_port_ops *port_ops = drive->hwif->port_ops;
-
-	if (drive->media == ide_disk)
-		ide_disk_pre_reset(drive);
-	else
-		drive->dev_flags |= IDE_DFLAG_POST_RESET;
-
-	if (drive->dev_flags & IDE_DFLAG_USING_DMA) {
-		if (drive->crc_count)
-			ide_check_dma_crc(drive);
-		else
-			ide_dma_off(drive);
-	}
-
-	if ((drive->dev_flags & IDE_DFLAG_KEEP_SETTINGS) == 0) {
-		if ((drive->dev_flags & IDE_DFLAG_USING_DMA) == 0) {
-			drive->dev_flags &= ~IDE_DFLAG_UNMASK;
-			drive->io_32bit = 0;
-		}
-		return;
-	}
-
-	if (port_ops && port_ops->pre_reset)
-		port_ops->pre_reset(drive);
-
-	if (drive->current_speed != 0xff)
-		drive->desired_speed = drive->current_speed;
-	drive->current_speed = 0xff;
-}
-
-/*
- * do_reset1() attempts to recover a confused drive by resetting it.
- * Unfortunately, resetting a disk drive actually resets all devices on
- * the same interface, so it can really be thought of as resetting the
- * interface rather than resetting the drive.
- *
- * ATAPI devices have their own reset mechanism which allows them to be
- * individually reset without clobbering other devices on the same interface.
- *
- * Unfortunately, the IDE interface does not generate an interrupt to let
- * us know when the reset operation has finished, so we must poll for this.
- * Equally poor, though, is the fact that this may a very long time to complete,
- * (up to 30 seconds worstcase).  So, instead of busy-waiting here for it,
- * we set a timer to poll at 50ms intervals.
- */
-static ide_startstop_t do_reset1(ide_drive_t *drive, int do_not_try_atapi)
-{
-	ide_hwif_t *hwif = drive->hwif;
-	struct ide_io_ports *io_ports = &hwif->io_ports;
-	const struct ide_tp_ops *tp_ops = hwif->tp_ops;
-	const struct ide_port_ops *port_ops;
-	ide_drive_t *tdrive;
-	unsigned long flags, timeout;
-	int i;
-	DEFINE_WAIT(wait);
-
-	spin_lock_irqsave(&hwif->lock, flags);
-
-	/* We must not reset with running handlers */
-	BUG_ON(hwif->handler != NULL);
-
-	/* For an ATAPI device, first try an ATAPI SRST. */
-	if (drive->media != ide_disk && !do_not_try_atapi) {
-		pre_reset(drive);
-		SELECT_DRIVE(drive);
-		udelay(20);
-		tp_ops->exec_command(hwif, ATA_CMD_DEV_RESET);
-		ndelay(400);
-		hwif->poll_timeout = jiffies + WAIT_WORSTCASE;
-		hwif->polling = 1;
-		__ide_set_handler(drive, &atapi_reset_pollfunc, HZ/20, NULL);
-		spin_unlock_irqrestore(&hwif->lock, flags);
-		return ide_started;
-	}
-
-	/* We must not disturb devices in the IDE_DFLAG_PARKED state. */
-	do {
-		unsigned long now;
-
-		prepare_to_wait(&ide_park_wq, &wait, TASK_UNINTERRUPTIBLE);
-		timeout = jiffies;
-		ide_port_for_each_present_dev(i, tdrive, hwif) {
-			if ((tdrive->dev_flags & IDE_DFLAG_PARKED) &&
-			    time_after(tdrive->sleep, timeout))
-				timeout = tdrive->sleep;
-		}
-
-		now = jiffies;
-		if (time_before_eq(timeout, now))
-			break;
-
-		spin_unlock_irqrestore(&hwif->lock, flags);
-		timeout = schedule_timeout_uninterruptible(timeout - now);
-		spin_lock_irqsave(&hwif->lock, flags);
-	} while (timeout);
-	finish_wait(&ide_park_wq, &wait);
-
-	/*
-	 * First, reset any device state data we were maintaining
-	 * for any of the drives on this interface.
-	 */
-	ide_port_for_each_dev(i, tdrive, hwif)
-		pre_reset(tdrive);
-
-	if (io_ports->ctl_addr == 0) {
-		spin_unlock_irqrestore(&hwif->lock, flags);
-		ide_complete_drive_reset(drive, -ENXIO);
-		return ide_stopped;
-	}
-
-	/*
-	 * Note that we also set nIEN while resetting the device,
-	 * to mask unwanted interrupts from the interface during the reset.
-	 * However, due to the design of PC hardware, this will cause an
-	 * immediate interrupt due to the edge transition it produces.
-	 * This single interrupt gives us a "fast poll" for drives that
-	 * recover from reset very quickly, saving us the first 50ms wait time.
-	 *
-	 * TODO: add ->softreset method and stop abusing ->set_irq
-	 */
-	/* set SRST and nIEN */
-	tp_ops->set_irq(hwif, 4);
-	/* more than enough time */
-	udelay(10);
-	/* clear SRST, leave nIEN (unless device is on the quirk list) */
-	tp_ops->set_irq(hwif, drive->quirk_list == 2);
-	/* more than enough time */
-	udelay(10);
-	hwif->poll_timeout = jiffies + WAIT_WORSTCASE;
-	hwif->polling = 1;
-	__ide_set_handler(drive, &reset_pollfunc, HZ/20, NULL);
-
-	/*
-	 * Some weird controller like resetting themselves to a strange
-	 * state when the disks are reset this way. At least, the Winbond
-	 * 553 documentation says that
-	 */
-	port_ops = hwif->port_ops;
-	if (port_ops && port_ops->resetproc)
-		port_ops->resetproc(drive);
-
-	spin_unlock_irqrestore(&hwif->lock, flags);
-	return ide_started;
-}
-
-/*
- * ide_do_reset() is the entry point to the drive/interface reset code.
- */
-
-ide_startstop_t ide_do_reset(ide_drive_t *drive)
-{
-	return do_reset1(drive, 0);
-}
-EXPORT_SYMBOL(ide_do_reset);
-
 /*
  * ide_wait_not_busy() waits for the currently selected device on the hwif
  * to report a non-busy status, see comments in ide_probe_port().