summaryrefslogtreecommitdiffstats
path: root/drivers/ide/legacy/qd65xx.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ide/legacy/qd65xx.c')
-rw-r--r--drivers/ide/legacy/qd65xx.c238
1 files changed, 84 insertions, 154 deletions
diff --git a/drivers/ide/legacy/qd65xx.c b/drivers/ide/legacy/qd65xx.c
index 7016bdf4fcc..6424af15432 100644
--- a/drivers/ide/legacy/qd65xx.c
+++ b/drivers/ide/legacy/qd65xx.c
@@ -11,11 +11,7 @@
*
* QDI QD6500/QD6580 EIDE controller fast support
*
- * Please set local bus speed using kernel parameter idebus
- * for example, "idebus=33" stands for 33Mhz VLbus
* To activate controller support, use "ide0=qd65xx"
- * To enable tuning, use "hda=autotune hdb=autotune"
- * To enable 2nd channel tuning (qd6580 only), use "hdc=autotune hdd=autotune"
*/
/*
@@ -37,6 +33,8 @@
#include <asm/system.h>
#include <asm/io.h>
+#define DRV_NAME "qd65xx"
+
#include "qd65xx.h"
/*
@@ -88,12 +86,12 @@
static int timings[4]={-1,-1,-1,-1}; /* stores current timing for each timer */
/*
- * qd_select:
+ * qd65xx_select:
*
- * This routine is invoked from ide.c to prepare for access to a given drive.
+ * This routine is invoked to prepare for access to a given drive.
*/
-static void qd_select (ide_drive_t *drive)
+static void qd65xx_select(ide_drive_t *drive)
{
u8 index = (( (QD_TIMREG(drive)) & 0x80 ) >> 7) |
(QD_TIMREG(drive) & 0x02);
@@ -112,17 +110,18 @@ static void qd_select (ide_drive_t *drive)
static u8 qd6500_compute_timing (ide_hwif_t *hwif, int active_time, int recovery_time)
{
- u8 active_cycle,recovery_cycle;
+ int clk = ide_vlb_clk ? ide_vlb_clk : system_bus_clock();
+ u8 act_cyc, rec_cyc;
- if (system_bus_clock()<=33) {
- active_cycle = 9 - IDE_IN(active_time * system_bus_clock() / 1000 + 1, 2, 9);
- recovery_cycle = 15 - IDE_IN(recovery_time * system_bus_clock() / 1000 + 1, 0, 15);
+ if (clk <= 33) {
+ act_cyc = 9 - IDE_IN(active_time * clk / 1000 + 1, 2, 9);
+ rec_cyc = 15 - IDE_IN(recovery_time * clk / 1000 + 1, 0, 15);
} else {
- active_cycle = 8 - IDE_IN(active_time * system_bus_clock() / 1000 + 1, 1, 8);
- recovery_cycle = 18 - IDE_IN(recovery_time * system_bus_clock() / 1000 + 1, 3, 18);
+ act_cyc = 8 - IDE_IN(active_time * clk / 1000 + 1, 1, 8);
+ rec_cyc = 18 - IDE_IN(recovery_time * clk / 1000 + 1, 3, 18);
}
- return((recovery_cycle<<4) | 0x08 | active_cycle);
+ return (rec_cyc << 4) | 0x08 | act_cyc;
}
/*
@@ -133,10 +132,13 @@ static u8 qd6500_compute_timing (ide_hwif_t *hwif, int active_time, int recovery
static u8 qd6580_compute_timing (int active_time, int recovery_time)
{
- u8 active_cycle = 17 - IDE_IN(active_time * system_bus_clock() / 1000 + 1, 2, 17);
- u8 recovery_cycle = 15 - IDE_IN(recovery_time * system_bus_clock() / 1000 + 1, 2, 15);
+ int clk = ide_vlb_clk ? ide_vlb_clk : system_bus_clock();
+ u8 act_cyc, rec_cyc;
+
+ act_cyc = 17 - IDE_IN(active_time * clk / 1000 + 1, 2, 17);
+ rec_cyc = 15 - IDE_IN(recovery_time * clk / 1000 + 1, 2, 15);
- return((recovery_cycle<<4) | active_cycle);
+ return (rec_cyc << 4) | act_cyc;
}
/*
@@ -168,36 +170,15 @@ static int qd_find_disk_type (ide_drive_t *drive,
}
/*
- * qd_timing_ok:
- *
- * check whether timings don't conflict
- */
-
-static int qd_timing_ok (ide_drive_t drives[])
-{
- return (IDE_IMPLY(drives[0].present && drives[1].present,
- IDE_IMPLY(QD_TIMREG(drives) == QD_TIMREG(drives+1),
- QD_TIMING(drives) == QD_TIMING(drives+1))));
- /* if same timing register, must be same timing */
-}
-
-/*
* qd_set_timing:
*
- * records the timing, and enables selectproc as needed
+ * records the timing
*/
static void qd_set_timing (ide_drive_t *drive, u8 timing)
{
- ide_hwif_t *hwif = HWIF(drive);
-
drive->drive_data &= 0xff00;
drive->drive_data |= timing;
- if (qd_timing_ok(hwif->drives)) {
- qd_select(drive); /* selects once */
- hwif->selectproc = NULL;
- } else
- hwif->selectproc = &qd_select;
printk(KERN_DEBUG "%s: %#x\n", drive->name, timing);
}
@@ -225,10 +206,11 @@ static void qd6500_set_pio_mode(ide_drive_t *drive, const u8 pio)
static void qd6580_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
- int base = HWIF(drive)->select_data;
+ ide_hwif_t *hwif = drive->hwif;
unsigned int cycle_time;
int active_time = 175;
int recovery_time = 415; /* worst case values from the dos driver */
+ u8 base = (hwif->config_data & 0xff00) >> 8;
if (drive->id && !qd_find_disk_type(drive, &active_time, &recovery_time)) {
cycle_time = ide_pio_cycle_time(drive, pio);
@@ -299,21 +281,10 @@ static int __init qd_testreg(int port)
return (readreg != QD_TESTVAL);
}
-/*
- * qd_setup:
- *
- * called to setup an ata channel : adjusts attributes & links for tuning
- */
-
-static void __init qd_setup(ide_hwif_t *hwif, int base, int config)
-{
- hwif->select_data = base;
- hwif->config_data = config;
-}
-
static void __init qd6500_port_init_devs(ide_hwif_t *hwif)
{
- u8 base = hwif->select_data, config = QD_CONFIG(hwif);
+ u8 base = (hwif->config_data & 0xff00) >> 8;
+ u8 config = QD_CONFIG(hwif);
hwif->drives[0].drive_data = QD6500_DEF_DATA;
hwif->drives[1].drive_data = QD6500_DEF_DATA;
@@ -322,9 +293,10 @@ static void __init qd6500_port_init_devs(ide_hwif_t *hwif)
static void __init qd6580_port_init_devs(ide_hwif_t *hwif)
{
u16 t1, t2;
- u8 base = hwif->select_data, config = QD_CONFIG(hwif);
+ u8 base = (hwif->config_data & 0xff00) >> 8;
+ u8 config = QD_CONFIG(hwif);
- if (QD_CONTROL(hwif) & QD_CONTR_SEC_DISABLED) {
+ if (hwif->host_flags & IDE_HFLAG_SINGLE) {
t1 = QD6580_DEF_DATA;
t2 = QD6580_DEF_DATA2;
} else
@@ -334,11 +306,23 @@ static void __init qd6580_port_init_devs(ide_hwif_t *hwif)
hwif->drives[1].drive_data = t2;
}
+static const struct ide_port_ops qd6500_port_ops = {
+ .port_init_devs = qd6500_port_init_devs,
+ .set_pio_mode = qd6500_set_pio_mode,
+ .selectproc = qd65xx_select,
+};
+
+static const struct ide_port_ops qd6580_port_ops = {
+ .port_init_devs = qd6580_port_init_devs,
+ .set_pio_mode = qd6580_set_pio_mode,
+ .selectproc = qd65xx_select,
+};
+
static const struct ide_port_info qd65xx_port_info __initdata = {
+ .name = DRV_NAME,
.chipset = ide_qd65xx,
.host_flags = IDE_HFLAG_IO_32BIT |
- IDE_HFLAG_NO_DMA |
- IDE_HFLAG_NO_AUTOTUNE,
+ IDE_HFLAG_NO_DMA,
.pio_mask = ATA_PIO4,
};
@@ -351,65 +335,41 @@ static const struct ide_port_info qd65xx_port_info __initdata = {
static int __init qd_probe(int base)
{
- ide_hwif_t *hwif;
- u8 config, unit;
- u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
- hw_regs_t hw[2];
+ int rc;
+ u8 config, unit, control;
+ struct ide_port_info d = qd65xx_port_info;
config = inb(QD_CONFIG_PORT);
if (! ((config & QD_CONFIG_BASEPORT) >> 1 == (base == 0xb0)) )
- return 1;
+ return -ENODEV;
unit = ! (config & QD_CONFIG_IDE_BASEPORT);
- memset(&hw, 0, sizeof(hw));
+ if (unit)
+ d.host_flags |= IDE_HFLAG_QD_2ND_PORT;
- ide_std_init_ports(&hw[0], 0x1f0, 0x3f6);
- hw[0].irq = 14;
+ switch (config & 0xf0) {
+ case QD_CONFIG_QD6500:
+ if (qd_testreg(base))
+ return -ENODEV; /* bad register */
- ide_std_init_ports(&hw[1], 0x170, 0x376);
- hw[1].irq = 15;
-
- if ((config & 0xf0) == QD_CONFIG_QD6500) {
-
- if (qd_testreg(base)) return 1; /* bad register */
-
- /* qd6500 found */
-
- hwif = &ide_hwifs[unit];
- printk(KERN_NOTICE "%s: qd6500 at %#x\n", hwif->name, base);
- printk(KERN_DEBUG "qd6500: config=%#x, ID3=%u\n",
- config, QD_ID3);
-
if (config & QD_CONFIG_DISABLED) {
printk(KERN_WARNING "qd6500 is disabled !\n");
- return 1;
+ return -ENODEV;
}
- ide_init_port_hw(hwif, &hw[unit]);
-
- qd_setup(hwif, base, config);
-
- hwif->port_init_devs = qd6500_port_init_devs;
- hwif->set_pio_mode = &qd6500_set_pio_mode;
-
- idx[unit] = unit;
-
- ide_device_add(idx, &qd65xx_port_info);
-
- return 1;
- }
-
- if (((config & 0xf0) == QD_CONFIG_QD6580_A) ||
- ((config & 0xf0) == QD_CONFIG_QD6580_B)) {
-
- u8 control;
-
- if (qd_testreg(base) || qd_testreg(base+0x02)) return 1;
- /* bad registers */
+ printk(KERN_NOTICE "qd6500 at %#x\n", base);
+ printk(KERN_DEBUG "qd6500: config=%#x, ID3=%u\n",
+ config, QD_ID3);
- /* qd6580 found */
+ d.port_ops = &qd6500_port_ops;
+ d.host_flags |= IDE_HFLAG_SINGLE;
+ break;
+ case QD_CONFIG_QD6580_A:
+ case QD_CONFIG_QD6580_B:
+ if (qd_testreg(base) || qd_testreg(base + 0x02))
+ return -ENODEV; /* bad registers */
control = inb(QD_CONTROL_PORT);
@@ -419,74 +379,44 @@ static int __init qd_probe(int base)
outb(QD_DEF_CONTR, QD_CONTROL_PORT);
- if (control & QD_CONTR_SEC_DISABLED) {
- /* secondary disabled */
-
- hwif = &ide_hwifs[unit];
- printk(KERN_INFO "%s: qd6580: single IDE board\n",
- hwif->name);
-
- ide_init_port_hw(hwif, &hw[unit]);
-
- qd_setup(hwif, base, config | (control << 8));
-
- hwif->port_init_devs = qd6580_port_init_devs;
- hwif->set_pio_mode = &qd6580_set_pio_mode;
-
- idx[unit] = unit;
+ d.port_ops = &qd6580_port_ops;
+ if (control & QD_CONTR_SEC_DISABLED)
+ d.host_flags |= IDE_HFLAG_SINGLE;
- ide_device_add(idx, &qd65xx_port_info);
-
- return 1;
- } else {
- ide_hwif_t *mate;
-
- hwif = &ide_hwifs[0];
- mate = &ide_hwifs[1];
- /* secondary enabled */
- printk(KERN_INFO "%s&%s: qd6580: dual IDE board\n",
- hwif->name, mate->name);
-
- ide_init_port_hw(hwif, &hw[0]);
- ide_init_port_hw(mate, &hw[1]);
-
- qd_setup(hwif, base, config | (control << 8));
-
- hwif->port_init_devs = qd6580_port_init_devs;
- hwif->set_pio_mode = &qd6580_set_pio_mode;
-
- qd_setup(mate, base, config | (control << 8));
-
- mate->port_init_devs = qd6580_port_init_devs;
- mate->set_pio_mode = &qd6580_set_pio_mode;
+ printk(KERN_INFO "qd6580: %s IDE board\n",
+ (control & QD_CONTR_SEC_DISABLED) ? "single" : "dual");
+ break;
+ default:
+ return -ENODEV;
+ }
- idx[0] = 0;
- idx[1] = 1;
+ rc = ide_legacy_device_add(&d, (base << 8) | config);
- ide_device_add(idx, &qd65xx_port_info);
+ if (d.host_flags & IDE_HFLAG_SINGLE)
+ return (rc == 0) ? 1 : rc;
- return 0; /* no other qd65xx possible */
- }
- }
- /* no qd65xx found */
- return 1;
+ return rc;
}
-int probe_qd65xx = 0;
+static int probe_qd65xx;
module_param_named(probe, probe_qd65xx, bool, 0);
MODULE_PARM_DESC(probe, "probe for QD65xx chipsets");
static int __init qd65xx_init(void)
{
+ int rc1, rc2 = -ENODEV;
+
if (probe_qd65xx == 0)
return -ENODEV;
- if (qd_probe(0x30))
- qd_probe(0xb0);
- if (ide_hwifs[0].chipset != ide_qd65xx &&
- ide_hwifs[1].chipset != ide_qd65xx)
+ rc1 = qd_probe(0x30);
+ if (rc1)
+ rc2 = qd_probe(0xb0);
+
+ if (rc1 < 0 && rc2 < 0)
return -ENODEV;
+
return 0;
}