summaryrefslogtreecommitdiffstats
path: root/drivers/ide/legacy
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ide/legacy')
-rw-r--r--drivers/ide/legacy/ali14xx.c5
-rw-r--r--drivers/ide/legacy/buddha.c27
-rw-r--r--drivers/ide/legacy/falconide.c59
-rw-r--r--drivers/ide/legacy/gayle.c50
-rw-r--r--drivers/ide/legacy/hd.c815
-rw-r--r--drivers/ide/legacy/ht6560b.c41
-rw-r--r--drivers/ide/legacy/ide-4drives.c43
-rw-r--r--drivers/ide/legacy/ide-cs.c101
-rw-r--r--drivers/ide/legacy/ide_platform.c39
-rw-r--r--drivers/ide/legacy/macide.c18
-rw-r--r--drivers/ide/legacy/q40ide.c50
-rw-r--r--drivers/ide/legacy/qd65xx.c23
12 files changed, 211 insertions, 1060 deletions
diff --git a/drivers/ide/legacy/ali14xx.c b/drivers/ide/legacy/ali14xx.c
index 90c65cf9744..4ec19737f3c 100644
--- a/drivers/ide/legacy/ali14xx.c
+++ b/drivers/ide/legacy/ali14xx.c
@@ -116,11 +116,12 @@ static void ali14xx_set_pio_mode(ide_drive_t *drive, const u8 pio)
int time1, time2;
u8 param1, param2, param3, param4;
unsigned long flags;
- int bus_speed = ide_vlb_clk ? ide_vlb_clk : system_bus_clock();
+ int bus_speed = ide_vlb_clk ? ide_vlb_clk : 50;
+ struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio);
/* calculate timing, according to PIO mode */
time1 = ide_pio_cycle_time(drive, pio);
- time2 = ide_pio_timings[pio].active_time;
+ time2 = t->active;
param3 = param1 = (time2 * bus_speed + 999) / 1000;
param4 = param2 = (time1 * bus_speed + 999) / 1000 - param1;
if (pio < 3) {
diff --git a/drivers/ide/legacy/buddha.c b/drivers/ide/legacy/buddha.c
index 5c730e4dd73..7c2afa97f41 100644
--- a/drivers/ide/legacy/buddha.c
+++ b/drivers/ide/legacy/buddha.c
@@ -37,6 +37,8 @@
#define CATWEASEL_NUM_HWIFS 3
#define XSURF_NUM_HWIFS 2
+#define MAX_NUM_HWIFS 3
+
/*
* Bases of the IDE interfaces (relative to the board address)
*/
@@ -138,6 +140,8 @@ static void __init buddha_setup_ports(hw_regs_t *hw, unsigned long base,
hw->irq = IRQ_AMIGA_PORTS;
hw->ack_intr = ack_intr;
+
+ hw->chipset = ide_generic;
}
/*
@@ -146,18 +150,14 @@ static void __init buddha_setup_ports(hw_regs_t *hw, unsigned long base,
static int __init buddha_init(void)
{
- hw_regs_t hw;
- ide_hwif_t *hwif;
- int i;
-
struct zorro_dev *z = NULL;
u_long buddha_board = 0;
BuddhaType type;
- int buddha_num_hwifs;
+ int buddha_num_hwifs, i;
while ((z = zorro_find_device(ZORRO_WILDCARD, z))) {
unsigned long board;
- u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
+ hw_regs_t hw[MAX_NUM_HWIFS], *hws[] = { NULL, NULL, NULL, NULL };
if (z->id == ZORRO_PROD_INDIVIDUAL_COMPUTERS_BUDDHA) {
buddha_num_hwifs = BUDDHA_NUM_HWIFS;
@@ -219,20 +219,13 @@ fail_base2:
ack_intr = xsurf_ack_intr;
}
- buddha_setup_ports(&hw, base, ctl, irq_port, ack_intr);
+ buddha_setup_ports(&hw[i], base, ctl, irq_port,
+ ack_intr);
- hwif = ide_find_port();
- if (hwif) {
- u8 index = hwif->index;
-
- ide_init_port_data(hwif, index);
- ide_init_port_hw(hwif, &hw);
-
- idx[i] = index;
- }
+ hws[i] = &hw[i];
}
- ide_device_add(idx, NULL);
+ ide_host_add(NULL, hws, NULL);
}
return 0;
diff --git a/drivers/ide/legacy/falconide.c b/drivers/ide/legacy/falconide.c
index 9e449a0c623..724f95073d8 100644
--- a/drivers/ide/legacy/falconide.c
+++ b/drivers/ide/legacy/falconide.c
@@ -66,6 +66,27 @@ static void falconide_output_data(ide_drive_t *drive, struct request *rq,
outsw_swapw(data_addr, buf, (len + 1) / 2);
}
+/* Atari has a byte-swapped IDE interface */
+static const struct ide_tp_ops falconide_tp_ops = {
+ .exec_command = ide_exec_command,
+ .read_status = ide_read_status,
+ .read_altstatus = ide_read_altstatus,
+ .read_sff_dma_status = ide_read_sff_dma_status,
+
+ .set_irq = ide_set_irq,
+
+ .tf_load = ide_tf_load,
+ .tf_read = ide_tf_read,
+
+ .input_data = falconide_input_data,
+ .output_data = falconide_output_data,
+};
+
+static const struct ide_port_info falconide_port_info = {
+ .tp_ops = &falconide_tp_ops,
+ .host_flags = IDE_HFLAG_NO_DMA,
+};
+
static void __init falconide_setup_ports(hw_regs_t *hw)
{
int i;
@@ -81,6 +102,8 @@ static void __init falconide_setup_ports(hw_regs_t *hw)
hw->irq = IRQ_MFP_IDE;
hw->ack_intr = NULL;
+
+ hw->chipset = ide_generic;
}
/*
@@ -89,11 +112,12 @@ static void __init falconide_setup_ports(hw_regs_t *hw)
static int __init falconide_init(void)
{
- hw_regs_t hw;
- ide_hwif_t *hwif;
+ struct ide_host *host;
+ hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
+ int rc;
if (!MACH_IS_ATARI || !ATARIHW_PRESENT(IDE))
- return 0;
+ return -ENODEV;
printk(KERN_INFO "ide: Falcon IDE controller\n");
@@ -104,24 +128,25 @@ static int __init falconide_init(void)
falconide_setup_ports(&hw);
- hwif = ide_find_port();
- if (hwif) {
- u8 index = hwif->index;
- u8 idx[4] = { index, 0xff, 0xff, 0xff };
-
- ide_init_port_data(hwif, index);
- ide_init_port_hw(hwif, &hw);
+ host = ide_host_alloc(&falconide_port_info, hws);
+ if (host == NULL) {
+ rc = -ENOMEM;
+ goto err;
+ }
- /* Atari has a byte-swapped IDE interface */
- hwif->input_data = falconide_input_data;
- hwif->output_data = falconide_output_data;
+ ide_get_lock(NULL, NULL);
+ rc = ide_host_register(host, &falconide_port_info, hws);
+ ide_release_lock();
- ide_get_lock(NULL, NULL);
- ide_device_add(idx, NULL);
- ide_release_lock();
- }
+ if (rc)
+ goto err_free;
return 0;
+err_free:
+ ide_host_free(host);
+err:
+ release_mem_region(ATA_HD_BASE, 0x40);
+ return rc;
}
module_init(falconide_init);
diff --git a/drivers/ide/legacy/gayle.c b/drivers/ide/legacy/gayle.c
index a9c2593a898..51ba085d7aa 100644
--- a/drivers/ide/legacy/gayle.c
+++ b/drivers/ide/legacy/gayle.c
@@ -16,6 +16,7 @@
#include <linux/ide.h>
#include <linux/init.h>
#include <linux/zorro.h>
+#include <linux/module.h>
#include <asm/setup.h>
#include <asm/amigahw.h>
@@ -30,6 +31,8 @@
#define GAYLE_BASE_4000 0xdd2020 /* A4000/A4000T */
#define GAYLE_BASE_1200 0xda0000 /* A1200/A600 and E-Matrix 530 */
+#define GAYLE_IDEREG_SIZE 0x2000
+
/*
* Offsets from one of the above bases
*/
@@ -55,14 +58,13 @@
#define GAYLE_NUM_HWIFS 1
#define GAYLE_NUM_PROBE_HWIFS GAYLE_NUM_HWIFS
#define GAYLE_HAS_CONTROL_REG 1
-#define GAYLE_IDEREG_SIZE 0x2000
#else /* CONFIG_BLK_DEV_IDEDOUBLER */
#define GAYLE_NUM_HWIFS 2
#define GAYLE_NUM_PROBE_HWIFS (ide_doubler ? GAYLE_NUM_HWIFS : \
GAYLE_NUM_HWIFS-1)
#define GAYLE_HAS_CONTROL_REG (!ide_doubler)
-#define GAYLE_IDEREG_SIZE (ide_doubler ? 0x1000 : 0x2000)
-int ide_doubler = 0; /* support IDE doublers? */
+
+static int ide_doubler;
module_param_named(doubler, ide_doubler, bool, 0);
MODULE_PARM_DESC(doubler, "enable support for IDE doublers");
#endif /* CONFIG_BLK_DEV_IDEDOUBLER */
@@ -112,6 +114,8 @@ static void __init gayle_setup_ports(hw_regs_t *hw, unsigned long base,
hw->irq = IRQ_AMIGA_PORTS;
hw->ack_intr = ack_intr;
+
+ hw->chipset = ide_generic;
}
/*
@@ -120,8 +124,11 @@ static void __init gayle_setup_ports(hw_regs_t *hw, unsigned long base,
static int __init gayle_init(void)
{
- int a4000, i;
- u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
+ unsigned long phys_base, res_start, res_n;
+ unsigned long base, ctrlport, irqport;
+ ide_ack_intr_t *ack_intr;
+ int a4000, i, rc;
+ hw_regs_t hw[GAYLE_NUM_HWIFS], *hws[] = { NULL, NULL, NULL, NULL };
if (!MACH_IS_AMIGA)
return -ENODEV;
@@ -144,13 +151,6 @@ found:
#endif
"");
- for (i = 0; i < GAYLE_NUM_PROBE_HWIFS; i++) {
- unsigned long base, ctrlport, irqport;
- ide_ack_intr_t *ack_intr;
- hw_regs_t hw;
- ide_hwif_t *hwif;
- unsigned long phys_base, res_start, res_n;
-
if (a4000) {
phys_base = GAYLE_BASE_4000;
irqport = (unsigned long)ZTWO_VADDR(GAYLE_IRQ_4000);
@@ -164,34 +164,26 @@ found:
* FIXME: we now have selectable modes between mmio v/s iomio
*/
- phys_base += i*GAYLE_NEXT_PORT;
-
res_start = ((unsigned long)phys_base) & ~(GAYLE_NEXT_PORT-1);
res_n = GAYLE_IDEREG_SIZE;
if (!request_mem_region(res_start, res_n, "IDE"))
- continue;
+ return -EBUSY;
- base = (unsigned long)ZTWO_VADDR(phys_base);
+ for (i = 0; i < GAYLE_NUM_PROBE_HWIFS; i++) {
+ base = (unsigned long)ZTWO_VADDR(phys_base + i * GAYLE_NEXT_PORT);
ctrlport = GAYLE_HAS_CONTROL_REG ? (base + GAYLE_CONTROL) : 0;
- gayle_setup_ports(&hw, base, ctrlport, irqport, ack_intr);
-
- hwif = ide_find_port();
- if (hwif) {
- u8 index = hwif->index;
-
- ide_init_port_data(hwif, index);
- ide_init_port_hw(hwif, &hw);
+ gayle_setup_ports(&hw[i], base, ctrlport, irqport, ack_intr);
- idx[i] = index;
- } else
- release_mem_region(res_start, res_n);
+ hws[i] = &hw[i];
}
- ide_device_add(idx, NULL);
+ rc = ide_host_add(NULL, hws, NULL);
+ if (rc)
+ release_mem_region(res_start, res_n);
- return 0;
+ return rc;
}
module_init(gayle_init);
diff --git a/drivers/ide/legacy/hd.c b/drivers/ide/legacy/hd.c
deleted file mode 100644
index abdedf56643..00000000000
--- a/drivers/ide/legacy/hd.c
+++ /dev/null
@@ -1,815 +0,0 @@
-/*
- * Copyright (C) 1991, 1992 Linus Torvalds
- *
- * This is the low-level hd interrupt support. It traverses the
- * request-list, using interrupts to jump between functions. As
- * all the functions are called within interrupts, we may not
- * sleep. Special care is recommended.
- *
- * modified by Drew Eckhardt to check nr of hd's from the CMOS.
- *
- * Thanks to Branko Lankester, lankeste@fwi.uva.nl, who found a bug
- * in the early extended-partition checks and added DM partitions
- *
- * IRQ-unmask, drive-id, multiple-mode, support for ">16 heads",
- * and general streamlining by Mark Lord.
- *
- * Removed 99% of above. Use Mark's ide driver for those options.
- * This is now a lightweight ST-506 driver. (Paul Gortmaker)
- *
- * Modified 1995 Russell King for ARM processor.
- *
- * Bugfix: max_sectors must be <= 255 or the wheels tend to come
- * off in a hurry once you queue things up - Paul G. 02/2001
- */
-
-/* Uncomment the following if you want verbose error reports. */
-/* #define VERBOSE_ERRORS */
-
-#include <linux/blkdev.h>
-#include <linux/errno.h>
-#include <linux/signal.h>
-#include <linux/interrupt.h>
-#include <linux/timer.h>
-#include <linux/fs.h>
-#include <linux/kernel.h>
-#include <linux/genhd.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/ioport.h>
-#include <linux/mc146818rtc.h> /* CMOS defines */
-#include <linux/init.h>
-#include <linux/blkpg.h>
-#include <linux/hdreg.h>
-
-#define REALLY_SLOW_IO
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
-
-#ifdef __arm__
-#undef HD_IRQ
-#endif
-#include <asm/irq.h>
-#ifdef __arm__
-#define HD_IRQ IRQ_HARDDISK
-#endif
-
-/* Hd controller regster ports */
-
-#define HD_DATA 0x1f0 /* _CTL when writing */
-#define HD_ERROR 0x1f1 /* see err-bits */
-#define HD_NSECTOR 0x1f2 /* nr of sectors to read/write */
-#define HD_SECTOR 0x1f3 /* starting sector */
-#define HD_LCYL 0x1f4 /* starting cylinder */
-#define HD_HCYL 0x1f5 /* high byte of starting cyl */
-#define HD_CURRENT 0x1f6 /* 101dhhhh , d=drive, hhhh=head */
-#define HD_STATUS 0x1f7 /* see status-bits */
-#define HD_FEATURE HD_ERROR /* same io address, read=error, write=feature */
-#define HD_PRECOMP HD_FEATURE /* obsolete use of this port - predates IDE */
-#define HD_COMMAND HD_STATUS /* same io address, read=status, write=cmd */
-
-#define HD_CMD 0x3f6 /* used for resets */
-#define HD_ALTSTATUS 0x3f6 /* same as HD_STATUS but doesn't clear irq */
-
-/* Bits of HD_STATUS */
-#define ERR_STAT 0x01
-#define INDEX_STAT 0x02
-#define ECC_STAT 0x04 /* Corrected error */
-#define DRQ_STAT 0x08
-#define SEEK_STAT 0x10
-#define SERVICE_STAT SEEK_STAT
-#define WRERR_STAT 0x20
-#define READY_STAT 0x40
-#define BUSY_STAT 0x80
-
-/* Bits for HD_ERROR */
-#define MARK_ERR 0x01 /* Bad address mark */
-#define TRK0_ERR 0x02 /* couldn't find track 0 */
-#define ABRT_ERR 0x04 /* Command aborted */
-#define MCR_ERR 0x08 /* media change request */
-#define ID_ERR 0x10 /* ID field not found */
-#define MC_ERR 0x20 /* media changed */
-#define ECC_ERR 0x40 /* Uncorrectable ECC error */
-#define BBD_ERR 0x80 /* pre-EIDE meaning: block marked bad */
-#define ICRC_ERR 0x80 /* new meaning: CRC error during transfer */
-
-static DEFINE_SPINLOCK(hd_lock);
-static struct request_queue *hd_queue;
-
-#define MAJOR_NR HD_MAJOR
-#define QUEUE (hd_queue)
-#define CURRENT elv_next_request(hd_queue)
-
-#define TIMEOUT_VALUE (6*HZ)
-#define HD_DELAY 0
-
-#define MAX_ERRORS 16 /* Max read/write errors/sector */
-#define RESET_FREQ 8 /* Reset controller every 8th retry */
-#define RECAL_FREQ 4 /* Recalibrate every 4th retry */
-#define MAX_HD 2
-
-#define STAT_OK (READY_STAT|SEEK_STAT)
-#define OK_STATUS(s) (((s)&(STAT_OK|(BUSY_STAT|WRERR_STAT|ERR_STAT)))==STAT_OK)
-
-static void recal_intr(void);
-static void bad_rw_intr(void);
-
-static int reset;
-static int hd_error;
-
-/*
- * This struct defines the HD's and their types.
- */
-struct hd_i_struct {
- unsigned int head, sect, cyl, wpcom, lzone, ctl;
- int unit;
- int recalibrate;
- int special_op;
-};
-
-#ifdef HD_TYPE
-static struct hd_i_struct hd_info[] = { HD_TYPE };
-static int NR_HD = ARRAY_SIZE(hd_info);
-#else
-static struct hd_i_struct hd_info[MAX_HD];
-static int NR_HD;
-#endif
-
-static struct gendisk *hd_gendisk[MAX_HD];
-
-static struct timer_list device_timer;
-
-#define TIMEOUT_VALUE (6*HZ)
-
-#define SET_TIMER \
- do { \
- mod_timer(&device_timer, jiffies + TIMEOUT_VALUE); \
- } while (0)
-
-static void (*do_hd)(void) = NULL;
-#define SET_HANDLER(x) \
-if ((do_hd = (x)) != NULL) \
- SET_TIMER; \
-else \
- del_timer(&device_timer);
-
-
-#if (HD_DELAY > 0)
-
-#include <asm/i8253.h>
-
-unsigned long last_req;
-
-unsigned long read_timer(void)
-{
- unsigned long t, flags;
- int i;
-
- spin_lock_irqsave(&i8253_lock, flags);
- t = jiffies * 11932;
- outb_p(0, 0x43);
- i = inb_p(0x40);
- i |= inb(0x40) << 8;
- spin_unlock_irqrestore(&i8253_lock, flags);
- return(t - i);
-}
-#endif
-
-static void __init hd_setup(char *str, int *ints)
-{
- int hdind = 0;
-
- if (ints[0] != 3)
- return;
- if (hd_info[0].head != 0)
- hdind = 1;
- hd_info[hdind].head = ints[2];
- hd_info[hdind].sect = ints[3];
- hd_info[hdind].cyl = ints[1];
- hd_info[hdind].wpcom = 0;
- hd_info[hdind].lzone = ints[1];
- hd_info[hdind].ctl = (ints[2] > 8 ? 8 : 0);
- NR_HD = hdind+1;
-}
-
-static void dump_status(const char *msg, unsigned int stat)
-{
- char *name = "hd?";
- if (CURRENT)
- name = CURRENT->rq_disk->disk_name;
-
-#ifdef VERBOSE_ERRORS
- printk("%s: %s: status=0x%02x { ", name, msg, stat & 0xff);
- if (stat & BUSY_STAT) printk("Busy ");
- if (stat & READY_STAT) printk("DriveReady ");
- if (stat & WRERR_STAT) printk("WriteFault ");
- if (stat & SEEK_STAT) printk("SeekComplete ");
- if (stat & DRQ_STAT) printk("DataRequest ");
- if (stat & ECC_STAT) printk("CorrectedError ");
- if (stat & INDEX_STAT) printk("Index ");
- if (stat & ERR_STAT) printk("Error ");
- printk("}\n");
- if ((stat & ERR_STAT) == 0) {
- hd_error = 0;
- } else {
- hd_error = inb(HD_ERROR);
- printk("%s: %s: error=0x%02x { ", name, msg, hd_error & 0xff);
- if (hd_error & BBD_ERR) printk("BadSector ");
- if (hd_error & ECC_ERR) printk("UncorrectableError ");
- if (hd_error & ID_ERR) printk("SectorIdNotFound ");
- if (hd_error & ABRT_ERR) printk("DriveStatusError ");
- if (hd_error & TRK0_ERR) printk("TrackZeroNotFound ");
- if (hd_error & MARK_ERR) printk("AddrMarkNotFound ");
- printk("}");
- if (hd_error & (BBD_ERR|ECC_ERR|ID_ERR|MARK_ERR)) {
- printk(", CHS=%d/%d/%d", (inb(HD_HCYL)<<8) + inb(HD_LCYL),
- inb(HD_CURRENT) & 0xf, inb(HD_SECTOR));
- if (CURRENT)
- printk(", sector=%ld", CURRENT->sector);
- }
- printk("\n");
- }
-#else
- printk("%s: %s: status=0x%02x.\n", name, msg, stat & 0xff);
- if ((stat & ERR_STAT) == 0) {
- hd_error = 0;
- } else {
- hd_error = inb(HD_ERROR);
- printk("%s: %s: error=0x%02x.\n", name, msg, hd_error & 0xff);
- }
-#endif
-}
-
-static void check_status(void)
-{
- int i = inb_p(HD_STATUS);
-
- if (!OK_STATUS(i)) {
- dump_status("check_status", i);
- bad_rw_intr();
- }
-}
-
-static int controller_busy(void)
-{
- int retries = 100000;
- unsigned char status;
-
- do {
- status = inb_p(HD_STATUS);
- } while ((status & BUSY_STAT) && --retries);
- return status;
-}
-
-static int status_ok(void)
-{
- unsigned char status = inb_p(HD_STATUS);
-
- if (status & BUSY_STAT)
- return 1; /* Ancient, but does it make sense??? */
- if (status & WRERR_STAT)
- return 0;
- if (!(status & READY_STAT))
- return 0;
- if (!(status & SEEK_STAT))
- return 0;
- return 1;
-}
-
-static int controller_ready(unsigned int drive, unsigned int head)
-{
- int retry = 100;
-
- do {
- if (controller_busy() & BUSY_STAT)
- return 0;
- outb_p(0xA0 | (drive<<4) | head, HD_CURRENT);
- if (status_ok())
- return 1;
- } while (--retry);
- return 0;
-}
-
-static void hd_out(struct hd_i_struct *disk,
- unsigned int nsect,
- unsigned int sect,
- unsigned int head,
- unsigned int cyl,
- unsigned int cmd,
- void (*intr_addr)(void))
-{
- unsigned short port;
-
-#if (HD_DELAY > 0)
- while (read_timer() - last_req < HD_DELAY)
- /* nothing */;
-#endif
- if (reset)
- return;
- if (!controller_ready(disk->unit, head)) {
- reset = 1;
- return;
- }
- SET_HANDLER(intr_addr);
- outb_p(disk->ctl, HD_CMD);
- port = HD_DATA;
- outb_p(disk->wpcom >> 2, ++port);
- outb_p(nsect, ++port);
- outb_p(sect, ++port);
- outb_p(cyl, ++port);
- outb_p(cyl >> 8, ++port);
- outb_p(0xA0 | (disk->unit << 4) | head, ++port);
- outb_p(cmd, ++port);
-}
-
-static void hd_request (void);
-
-static int drive_busy(void)
-{
- unsigned int i;
- unsigned char c;
-
- for (i = 0; i < 500000 ; i++) {
- c = inb_p(HD_STATUS);
- if ((c & (BUSY_STAT | READY_STAT | SEEK_STAT)) == STAT_OK)
- return 0;
- }
- dump_status("reset timed out", c);
- return 1;
-}
-
-static void reset_controller(void)
-{
- int i;
-
- outb_p(4, HD_CMD);
- for (i = 0; i < 1000; i++) barrier();
- outb_p(hd_info[0].ctl & 0x0f, HD_CMD);
- for (i = 0; i < 1000; i++) barrier();
- if (drive_busy())
- printk("hd: controller still busy\n");
- else if ((hd_error = inb(HD_ERROR)) != 1)
- printk("hd: controller reset failed: %02x\n", hd_error);
-}
-
-static void reset_hd(void)
-{
- static int i;
-
-repeat:
- if (reset) {
- reset = 0;
- i = -1;
- reset_controller();
- } else {
- check_status();
- if (reset)
- goto repeat;
- }
- if (++i < NR_HD) {
- struct hd_i_struct *disk = &hd_info[i];
- disk->special_op = disk->recalibrate = 1;
- hd_out(disk, disk->sect, disk->sect, disk->head-1,
- disk->cyl, WIN_SPECIFY, &reset_hd);
- if (reset)
- goto repeat;
- } else
- hd_request();
-}
-
-/*
- * Ok, don't know what to do with the unexpected interrupts: on some machines
- * doing a reset and a retry seems to result in an eternal loop. Right now I
- * ignore it, and just set the timeout.
- *
- * On laptops (and "green" PCs), an unexpected interrupt occurs whenever the
- * drive enters "idle", "standby", or "sleep" mode, so if the status looks
- * "good", we just ignore the interrupt completely.
- */
-static void unexpected_hd_interrupt(void)
-{
- unsigned int stat = inb_p(HD_STATUS);
-
- if (stat & (BUSY_STAT|DRQ_STAT|ECC_STAT|ERR_STAT)) {
- dump_status("unexpected interrupt", stat);
- SET_TIMER;
- }
-}
-
-/*
- * bad_rw_intr() now tries to be a bit smarter and does things
- * according to the error returned by the controller.
- * -Mika Liljeberg (liljeber@cs.Helsinki.FI)
- */
-static void bad_rw_intr(void)
-{
- struct request *req = CURRENT;
- if (req != NULL) {
- struct hd_i_struct *disk = req->rq_disk->private_data;
- if (++req->errors >= MAX_ERRORS || (hd_error & BBD_ERR)) {
- end_request(req, 0);
- disk->special_op = disk->recalibrate = 1;
- } else if (req->errors % RESET_FREQ == 0)
- reset = 1;
- else if ((hd_error & TRK0_ERR) || req->errors % RECAL_FREQ == 0)
- disk->special_op = disk->recalibrate = 1;
- /* Otherwise just retry */
- }
-}
-
-static inline int wait_DRQ(void)
-{
- int retries;
- int stat;
-
- for (retries = 0; retries < 100000; retries++) {
- stat = inb_p(HD_STATUS);
- if (stat & DRQ_STAT)
- return 0;
- }
- dump_status("wait_DRQ", stat);
- return -1;
-}
-
-static void read_intr(void)
-{
- struct request *req;
- int i, retries = 100000;
-
- do {
- i = (unsigned) inb_p(HD_STATUS);
- if (i & BUSY_STAT)
- continue;
- if (!OK_STATUS(i))
- break;
- if (i & DRQ_STAT)
- goto ok_to_read;
- } while (--retries > 0);
- dump_status("read_intr", i);
- bad_rw_intr();
- hd_request();
- return;
-ok_to_read:
- req = CURRENT;
- insw(HD_DATA, req->buffer, 256);
- req->sector++;
- req->buffer += 512;
- req->errors = 0;
- i = --req->nr_sectors;
- --req->current_nr_sectors;
-#ifdef DEBUG
- printk("%s: read: sector %ld, remaining = %ld, buffer=%p\n",
- req->rq_disk->disk_name, req->sector, req->nr_sectors,
- req->buffer+512);
-#endif
- if (req->current_nr_sectors <= 0)
- end_request(req, 1);
- if (i > 0) {
- SET_HANDLER(&read_intr);
- return;
- }
- (void) inb_p(HD_STATUS);
-#if (HD_DELAY > 0)
- last_req = read_timer();
-#endif
- if (elv_next_request(QUEUE))
- hd_request();
- return;
-}
-
-static void write_intr(void)
-{
- struct request *req = CURRENT;
- int i;
- int retries = 100000;
-
- do {
- i = (unsigned) inb_p(HD_STATUS);
- if (i & BUSY_STAT)
- continue;
- if (!OK_STATUS(i))
- break;
- if ((req->nr_sectors <= 1) || (i & DRQ_STAT))
- goto ok_to_write;
- } while (--retries > 0);
- dump_status("write_intr", i);
- bad_rw_intr();
- hd_request();
- return;
-ok_to_write:
- req->sector++;
- i = --req->nr_sectors;
- --req->current_nr_sectors;
- req->buffer += 512;
- if (!i || (req->bio && req->current_nr_sectors <= 0))
- end_request(req, 1);
- if (i > 0) {
- SET_HANDLER(&write_intr);
- outsw(HD_DATA, req->buffer, 256);
- local_irq_enable();
- } else {
-#if (HD_DELAY > 0)
- last_req = read_timer();
-#endif
- hd_request();
- }
- return;
-}
-
-static void recal_intr(void)
-{
- check_status();
-#if (HD_DELAY > 0)
- last_req = read_timer();
-#endif
- hd_request();
-}
-
-/*
- * This is another of the error-routines I don't know what to do with. The
- * best idea seems to just set reset, and start all over again.
- */
-static void hd_times_out(unsigned long dummy)
-{
- char *name;
-
- do_hd = NULL;
-
- if (!CURRENT)
- return;
-
- disable_irq(HD_IRQ);
- local_irq_enable();
- reset = 1;
- name = CURRENT->rq_disk->disk_name;
- printk("%s: timeout\n", name);
- if (++CURRENT->errors >= MAX_ERRORS) {
-#ifdef DEBUG
- printk("%s: too many errors\n", name);
-#endif
- end_request(CURRENT, 0);
- }
- local_irq_disable();
- hd_request();
- enable_irq(HD_IRQ);
-}
-
-static int do_special_op(struct hd_i_struct *disk, struct request *req)
-{
- if (disk->recalibrate) {
- disk->recalibrate = 0;
- hd_out(disk, disk->sect, 0, 0, 0, WIN_RESTORE, &recal_intr);
- return reset;
- }
- if (disk->head > 16) {
- printk("%s: cannot handle device with more than 16 heads - giving up\n", req->rq_disk->disk_name);
- end_request(req, 0);
- }
- disk->special_op = 0;
- return 1;
-}
-
-/*
- * The driver enables interrupts as much as possible. In order to do this,
- * (a) the device-interrupt is disabled before entering hd_request(),
- * and (b) the timeout-interrupt is disabled before the sti().
- *
- * Interrupts are still masked (by default) whenever we are exchanging
- * data/cmds with a drive, because some drives seem to have very poor
- * tolerance for latency during I/O. The IDE driver has support to unmask
- * interrupts for non-broken hardware, so use that driver if required.
- */
-static void hd_request(void)
-{
- unsigned int block, nsect, sec, track, head, cyl;
- struct hd_i_struct *disk;
- struct request *req;
-
- if (do_hd)
- return;
-repeat:
- del_timer(&device_timer);
- local_irq_enable();
-
- req = CURRENT;
- if (!req) {
- do_hd = NULL;
- return;
- }
-
- if (reset) {
- local_irq_disable();
- reset_hd();
- return;
- }
- disk = req->rq_disk->private_data;
- block = req->sector;
- nsect = req->nr_sectors;
- if (block >= get_capacity(req->rq_disk) ||
- ((block+nsect) > get_capacity(req->rq_disk))) {
- printk("%s: bad access: block=%d, count=%d\n",
- req->rq_disk->disk_name, block, nsect);
- end_request(req, 0);
- goto repeat;
- }
-
- if (disk->special_op) {
- if (do_special_op(disk, req))
- goto repeat;
- return;
- }
- sec = block % disk->sect + 1;
- track = block / disk->sect;
- head = track % disk->head;
- cyl = track / disk->head;
-#ifdef DEBUG
- printk("%s: %sing: CHS=%d/%d/%d, sectors=%d, buffer=%p\n",
- req->rq_disk->disk_name,
- req_data_dir(req) == READ ? "read" : "writ",
- cyl, head, sec, nsect, req->buffer);
-#endif
- if (blk_fs_request(req)) {
- switch (rq_data_dir(req)) {
- case READ:
- hd_out(disk, nsect, sec, head, cyl, WIN_READ,
- &read_intr);
- if (reset)
- goto repeat;
- break;
- case WRITE:
- hd_out(disk, nsect, sec, head, cyl, WIN_WRITE,
- &write_intr);
- if (reset)
- goto repeat;
- if (wait_DRQ()) {
- bad_rw_intr();
- goto repeat;
- }
- outsw(HD_DATA, req->buffer, 256);
- break;
- default:
- printk("unknown hd-command\n");
- end_request(req, 0);
- break;
- }
- }
-}
-
-static void do_hd_request(struct request_queue *q)
-{
- disable_irq(HD_IRQ);
- hd_request();
- enable_irq(HD_IRQ);
-}
-
-static int hd_getgeo(struct block_device *bdev, struct hd_geometry *geo)
-{
- struct hd_i_struct *disk = bdev->bd_disk->private_data;
-
- geo->heads = disk->head;
- geo->sectors = disk->sect;
- geo->cylinders = disk->cyl;
- return 0;
-}
-
-/*
- * Releasing a block device means we sync() it, so that it can safely
- * be forgotten about...
- */
-
-static irqreturn_t hd_interrupt(int irq, void *dev_id)
-{
- void (*handler)(void) = do_hd;
-
- do_hd = NULL;
- del_timer(&device_timer);
- if (!handler)
- handler = unexpected_hd_interrupt;
- handler();
- local_irq_enable();
- return IRQ_HANDLED;
-}
-
-static struct block_device_operations hd_fops = {
- .getgeo = hd_getgeo,
-};
-
-/*
- * This is the hard disk IRQ description. The IRQF_DISABLED in sa_flags
- * means we run the IRQ-handler with interrupts disabled: this is bad for
- * interrupt latency, but anything else has led to problems on some
- * machines.
- *
- * We enable interrupts in some of the routines after making sure it's
- * safe.
- */
-
-static int __init hd_init(void)
-{
- int drive;
-
- if (register_blkdev(MAJOR_NR, "hd"))
- return -1;
-
- hd_queue = blk_init_queue(do_hd_request, &hd_lock);
- if (!hd_queue) {
- unregister_blkdev(MAJOR_NR, "hd");
- return -ENOMEM;
- }
-
- blk_queue_max_sectors(hd_queue, 255);
- init_timer(&device_timer);
- device_timer.function = hd_times_out;
- blk_queue_hardsect_size(hd_queue, 512);
-
- if (!NR_HD) {
- /*
- * We don't know anything about the drive. This means
- * that you *MUST* specify the drive parameters to the
- * kernel yourself.
- *
- * If we were on an i386, we used to read this info from
- * the BIOS or CMOS. This doesn't work all that well,
- * since this assumes that this is a primary or secondary
- * drive, and if we're using this legacy driver, it's
- * probably an auxilliary controller added to recover
- * legacy data off an ST-506 drive. Either way, it's
- * definitely safest to have the user explicitly specify
- * the information.
- */
- printk("hd: no drives specified - use hd=cyl,head,sectors"
- " on kernel command line\n");
- goto out;
- }
-
- for (drive = 0 ; drive < NR_HD ; drive++) {
- struct gendisk *disk = alloc_disk(64);
- struct hd_i_struct *p = &hd_info[drive];
- if (!disk)
- goto Enomem;
- disk->major = MAJOR_NR;
- disk->first_minor = drive << 6;
- disk->fops = &hd_fops;
- sprintf(disk->disk_name, "hd%c", 'a'+drive);
- disk->private_data = p;
- set_capacity(disk, p->head * p->sect * p->cyl);
- disk->queue = hd_queue;
- p->unit = drive;
- hd_gendisk[drive] = disk;
- printk("%s: %luMB, CHS=%d/%d/%d\n",
- disk->disk_name, (unsigned long)get_capacity(disk)/2048,
- p->cyl, p->head, p->sect);
- }
-
- if (request_irq(HD_IRQ, hd_interrupt, IRQF_DISABLED, "hd", NULL)) {
- printk("hd: unable to get IRQ%d for the hard disk driver\n",
- HD_IRQ);
- goto out1;
- }
- if (!request_region(HD_DATA, 8, "hd")) {
- printk(KERN_WARNING "hd: port 0x%x busy\n", HD_DATA);
- goto out2;
- }
- if (!request_region(HD_CMD, 1, "hd(cmd)")) {
- printk(KERN_WARNING "hd: port 0x%x busy\n", HD_CMD);
- goto out3;
- }
-
- /* Let them fly */
- for (drive = 0; drive < NR_HD; drive++)
- add_disk(hd_gendisk[drive]);
-
- return 0;
-
-out3:
- release_region(HD_DATA, 8);
-out2:
- free_irq(HD_IRQ, NULL);
-out1:
- for (drive = 0; drive < NR_HD; drive++)
- put_disk(hd_gendisk[drive]);
- NR_HD = 0;
-out:
- del_timer(&device_timer);
- unregister_blkdev(MAJOR_NR, "hd");
- blk_cleanup_queue(hd_queue);
- return -1;
-Enomem:
- while (drive--)
- put_disk(hd_gendisk[drive]);
- goto out;
-}
-
-static int __init parse_hd_setup(char *line)
-{
- int ints[6];
-
- (void) get_options(line, ARRAY_SIZE(ints), ints);
- hd_setup(NULL, ints);
-
- return 1;
-}
-__setup("hd=", parse_hd_setup);
-
-module_init(hd_init);
diff --git a/drivers/ide/legacy/ht6560b.c b/drivers/ide/legacy/ht6560b.c
index 4fe516df9f7..98f7c95e39e 100644
--- a/drivers/ide/legacy/ht6560b.c
+++ b/drivers/ide/legacy/ht6560b.c
@@ -3,34 +3,12 @@
*/
/*
- *
- * Version 0.01 Initial version hacked out of ide.c
- *
- * Version 0.02 Added support for PIO modes, auto-tune
- *
- * Version 0.03 Some cleanups
- *
- * Version 0.05 PIO mode cycle timings auto-tune using bus-speed
- *
- * Version 0.06 Prefetch mode now defaults no OFF. To set
- * prefetch mode OFF/ON use "hdparm -p8/-p9".
- * Unmask irq is disabled when prefetch mode
- * is enabled.
- *
- * Version 0.07 Trying to fix CD-ROM detection problem.
- * "Prefetch" mode bit OFF for ide disks and
- * ON for anything else.
- *
- * Version 0.08 Need to force prefetch for CDs and other non-disk
- * devices. (not sure which devices exactly need
- * prefetch)
- *
* HT-6560B EIDE-controller support
* To activate controller support use kernel parameter "ide0=ht6560b".
* Use hdparm utility to enable PIO mode support.
*
* Author: Mikko Ala-Fossi <maf@iki.fi>
- * Jan Evert van Grootheest <janevert@caiway.nl>
+ * Jan Evert van Grootheest <j.e.van.grootheest@caiway.nl>
*
* Try: http://www.maf.iki.fi/~maf/ht6560b/
*/
@@ -212,10 +190,11 @@ static u8 ht_pio2timings(ide_drive_t *drive, const u8 pio)
{
int active_time, recovery_time;
int active_cycles, recovery_cycles;
- int bus_speed = ide_vlb_clk ? ide_vlb_clk : system_bus_clock();
+ int bus_speed = ide_vlb_clk ? ide_vlb_clk : 50;
if (pio) {
unsigned int cycle_time;
+ struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio);
cycle_time = ide_pio_cycle_time(drive, pio);
@@ -224,10 +203,8 @@ static u8 ht_pio2timings(ide_drive_t *drive, const u8 pio)
* actual cycle time for recovery and activity
* according system bus speed.
*/
- active_time = ide_pio_timings[pio].active_time;
- recovery_time = cycle_time
- - active_time
- - ide_pio_timings[pio].setup_time;
+ active_time = t->active;
+ recovery_time = cycle_time - active_time - t->setup;
/*
* Cycle times should be Vesa bus cycles
*/
@@ -311,16 +288,16 @@ static void ht6560b_set_pio_mode(ide_drive_t *drive, const u8 pio)
#endif
}
-static void __init ht6560b_port_init_devs(ide_hwif_t *hwif)
+static void __init ht6560b_init_dev(ide_drive_t *drive)
{
+ ide_hwif_t *hwif = drive->hwif;
/* Setting default configurations for drives. */
int t = (HT_CONFIG_DEFAULT << 8) | HT_TIMING_DEFAULT;
if (hwif->channel)
t |= (HT_SECONDARY_IF << 8);
- hwif->drives[0].drive_data = t;
- hwif->drives[1].drive_data = t;
+ drive->drive_data = t;
}
static int probe_ht6560b;
@@ -329,7 +306,7 @@ module_param_named(probe, probe_ht6560b, bool, 0);
MODULE_PARM_DESC(probe, "probe for HT6560B chipset");
static const struct ide_port_ops ht6560b_port_ops = {
- .port_init_devs = ht6560b_port_init_devs,
+ .init_dev = ht6560b_init_dev,
.set_pio_mode = ht6560b_set_pio_mode,
.selectproc = ht6560b_selectproc,
};
diff --git a/drivers/ide/legacy/ide-4drives.c b/drivers/ide/legacy/ide-4drives.c
index ecae916a338..c76d55de699 100644
--- a/drivers/ide/legacy/ide-4drives.c
+++ b/drivers/ide/legacy/ide-4drives.c
@@ -11,12 +11,25 @@ static int probe_4drives;
module_param_named(probe, probe_4drives, bool, 0);
MODULE_PARM_DESC(probe, "probe for generic IDE chipset with 4 drives/port");
+static void ide_4drives_init_dev(ide_drive_t *drive)
+{
+ if (drive->hwif->channel)
+ drive->select.all ^= 0x20;
+}
+
+static const struct ide_port_ops ide_4drives_port_ops = {
+ .init_dev = ide_4drives_init_dev,
+};
+
+static const struct ide_port_info ide_4drives_port_info = {
+ .port_ops = &ide_4drives_port_ops,
+ .host_flags = IDE_HFLAG_SERIALIZE | IDE_HFLAG_NO_DMA,
+};
+
static int __init ide_4drives_init(void)
{
- ide_hwif_t *hwif, *mate;
unsigned long base = 0x1f0, ctl = 0x3f6;
- u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
- hw_regs_t hw;
+ hw_regs_t hw, *hws[] = { &hw, &hw, NULL, NULL };
if (probe_4drives == 0)
return -ENODEV;
@@ -40,29 +53,7 @@ static int __init ide_4drives_init(void)
hw.irq = 14;
hw.chipset = ide_4drives;
- hwif = ide_find_port();
- if (hwif) {
- ide_init_port_hw(hwif, &hw);
- idx[0] = hwif->index;
- }
-
- mate = ide_find_port();
- if (mate) {
- ide_init_port_hw(mate, &hw);
- mate->drives[0].select.all ^= 0x20;
- mate->drives[1].select.all ^= 0x20;
- idx[1] = mate->index;
-
- if (hwif) {
- hwif->mate = mate;
- mate->mate = hwif;
- hwif->serialized = mate->serialized = 1;
- }
- }
-
- ide_device_add(idx, NULL);
-
- return 0;
+ return ide_host_add(&ide_4drives_port_info, hws, NULL);
}
module_init(ide_4drives_init);
diff --git a/drivers/ide/legacy/ide-cs.c b/drivers/ide/legacy/ide-cs.c
index aa2ea3deac8..21bfac13784 100644
--- a/drivers/ide/legacy/ide-cs.c
+++ b/drivers/ide/legacy/ide-cs.c
@@ -63,11 +63,9 @@ MODULE_LICENSE("Dual MPL/GPL");
#define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0)
-#ifdef PCMCIA_DEBUG
-INT_MODULE_PARM(pc_debug, PCMCIA_DEBUG);
+#ifdef CONFIG_PCMCIA_DEBUG
+INT_MODULE_PARM(pc_debug, 0);
#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
-static char *version =
-"ide-cs.c 1.3 2002/10/26 05:45:31 (David Hinds)";
#else
#define DEBUG(n, args...)
#endif
@@ -76,7 +74,7 @@ static char *version =
typedef struct ide_info_t {
struct pcmcia_device *p_dev;
- ide_hwif_t *hwif;
+ struct ide_host *host;
int ndev;
dev_node_t node;
} ide_info_t;
@@ -134,14 +132,18 @@ static int ide_probe(struct pcmcia_device *link)
static void ide_detach(struct pcmcia_device *link)
{
ide_info_t *info = link->priv;
- ide_hwif_t *hwif = info->hwif;
+ ide_hwif_t *hwif = info->host->ports[0];
+ unsigned long data_addr, ctl_addr;
DEBUG(0, "ide_detach(0x%p)\n", link);
+ data_addr = hwif->io_ports.data_addr;
+ ctl_addr = hwif->io_ports.ctl_addr;
+
ide_release(link);
- release_region(hwif->io_ports.ctl_addr, 1);
- release_region(hwif->io_ports.data_addr, 8);
+ release_region(ctl_addr, 1);
+ release_region(data_addr, 8);
kfree(info);
} /* ide_detach */
@@ -150,13 +152,18 @@ static const struct ide_port_ops idecs_port_ops = {
.quirkproc = ide_undecoded_slave,
};
-static ide_hwif_t *idecs_register(unsigned long io, unsigned long ctl,
+static const struct ide_port_info idecs_port_info = {
+ .port_ops = &idecs_port_ops,
+ .host_flags = IDE_HFLAG_NO_DMA,
+};
+
+static struct ide_host *idecs_register(unsigned long io, unsigned long ctl,
unsigned long irq, struct pcmcia_device *handle)
{
+ struct ide_host *host;
ide_hwif_t *hwif;
- hw_regs_t hw;
- int i;
- u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
+ int i, rc;
+ hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
if (!request_region(io, 8, DRV_NAME)) {
printk(KERN_ERR "%s: I/O resource 0x%lX-0x%lX not free.\n",
@@ -177,22 +184,24 @@ static ide_hwif_t *idecs_register(unsigned long io, unsigned long ctl,
hw.chipset = ide_pci;
hw.dev = &handle->dev;
- hwif = ide_find_port();
- if (hwif == NULL)
+ rc = ide_host_add(&idecs_port_info, hws, &host);
+ if (rc)
goto out_release;
- i = hwif->index;
+ hwif = host->ports[0];
- ide_init_port_data(hwif, i);
- ide_init_port_hw(hwif, &hw);
- hwif->port_ops = &idecs_port_ops;
-
- idx[0] = i;
+ if (hwif->present)
+ return host;
- ide_device_add(idx, NULL);
+ /* retry registration in case device is still spinning up */
+ for (i = 0; i < 10; i++) {
+ msleep(100);
+ ide_port_scan(hwif);
+ if (hwif->present)
+ return host;
+ }
- if (hwif->present)
- return hwif;
+ return host;
out_release:
release_region(ctl, 1);
@@ -222,9 +231,9 @@ static int ide_config(struct pcmcia_device *link)
cistpl_cftable_entry_t dflt;
} *stk = NULL;
cistpl_cftable_entry_t *cfg;
- int i, pass, last_ret = 0, last_fn = 0, is_kme = 0;
+ int pass, last_ret = 0, last_fn = 0, is_kme = 0;
unsigned long io_base, ctl_base;
- ide_hwif_t *hwif;
+ struct ide_host *host;
DEBUG(0, "ide_config(0x%p)\n", link);
@@ -319,36 +328,21 @@ static int ide_config(struct pcmcia_device *link)
if (is_kme)
outb(0x81, ctl_base+1);
- /* retry registration in case device is still spinning up */
- for (i = 0; i < 10; i++) {
- hwif = idecs_register(io_base, ctl_base, link->irq.AssignedIRQ, link);
- if (hwif)
- break;
- if (link->io.NumPorts1 == 0x20) {
+ host = idecs_register(io_base, ctl_base, link->irq.AssignedIRQ, link);
+ if (host == NULL && link->io.NumPorts1 == 0x20) {
outb(0x02, ctl_base + 0x10);
- hwif = idecs_register(io_base + 0x10, ctl_base + 0x10,
+ host = idecs_register(io_base + 0x10, ctl_base + 0x10,
link->irq.AssignedIRQ, link);
- if (hwif) {
- io_base += 0x10;
- ctl_base += 0x10;
- break;
- }
- }
- msleep(100);
}
- if (hwif == NULL) {
- printk(KERN_NOTICE "ide-cs: ide_register() at 0x%3lx & 0x%3lx"
- ", irq %u failed\n", io_base, ctl_base,
- link->irq.AssignedIRQ);
+ if (host == NULL)
goto failed;
- }
info->ndev = 1;
- sprintf(info->node.dev_name, "hd%c", 'a' + hwif->index * 2);
- info->node.major = hwif->major;
+ sprintf(info->node.dev_name, "hd%c", 'a' + host->ports[0]->index * 2);
+ info->node.major = host->ports[0]->major;
info->node.minor = 0;
- info->hwif = hwif;
+ info->host = host;
link->dev_node = &info->node;
printk(KERN_INFO "ide-cs: %s: Vpp = %d.%d\n",
info->node.dev_name, link->conf.Vpp / 10, link->conf.Vpp % 10);
@@ -376,18 +370,18 @@ failed:
======================================================================*/
-void ide_release(struct pcmcia_device *link)
+static void ide_release(struct pcmcia_device *link)
{
ide_info_t *info = link->priv;
- ide_hwif_t *hwif = info->hwif;
+ struct ide_host *host = info->host;
DEBUG(0, "ide_release(0x%p)\n", link);
- if (info->ndev) {
+ if (info->ndev)
/* FIXME: if this fails we need to queue the cleanup somehow
-- need to investigate the required PCMCIA magic */
- ide_unregister(hwif);
- }
+ ide_host_remove(host);
+
info->ndev = 0;
pcmcia_disable_device(link);
@@ -411,6 +405,7 @@ static struct pcmcia_device_id ide_ids[] = {
PCMCIA_DEVICE_MANF_CARD(0x001c, 0x0001), /* Mitsubishi CFA */
PCMCIA_DEVICE_MANF_CARD(0x0032, 0x0704),
PCMCIA_DEVICE_MANF_CARD(0x0045, 0x0401), /* SanDisk CFA */
+ PCMCIA_DEVICE_MANF_CARD(0x004f, 0x0000), /* Kingston */
PCMCIA_DEVICE_MANF_CARD(0x0098, 0x0000), /* Toshiba */
PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x002d),
PCMCIA_DEVICE_MANF_CARD(0x00ce, 0x0000), /* Samsung */
@@ -440,6 +435,7 @@ static struct pcmcia_device_id ide_ids[] = {
PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDE", 0x547e66dc, 0x5c5ab149),
PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDEII", 0x547e66dc, 0xb3662674),
PCMCIA_DEVICE_PROD_ID12("LOOKMEET", "CBIDE2 ", 0xe37be2b5, 0x8671043b),
+ PCMCIA_DEVICE_PROD_ID12("M-Systems", "CF300", 0x7ed2ad87, 0x7e9e78ee),
PCMCIA_DEVICE_PROD_ID12("M-Systems", "CF500", 0x7ed2ad87, 0x7a13045c),
PCMCIA_DEVICE_PROD_ID2("NinjaATA-", 0xebe0bd79),
PCMCIA_DEVICE_PROD_ID12("PCMCIA", "CD-ROM", 0x281f1c5d, 0x66536591),
@@ -450,6 +446,7 @@ static struct pcmcia_device_id ide_ids[] = {
PCMCIA_DEVICE_PROD_ID12("SMI VENDOR", "SMI PRODUCT", 0x30896c92, 0x703cc5f6),
PCMCIA_DEVICE_PROD_ID12("TOSHIBA", "MK2001MPL", 0xb4585a1a, 0x3489e003),
PCMCIA_DEVICE_PROD_ID1("TRANSCEND 512M ", 0xd0909443),
+ PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF45", 0x709b1bf1, 0xf68b6f32),
PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF80", 0x709b1bf1, 0x2a54d4b1),
PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS2GCF120", 0x709b1bf1, 0x969aa4f2),
PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF120", 0x709b1bf1, 0xf54a91c8),
diff --git a/drivers/ide/legacy/ide_platform.c b/drivers/ide/legacy/ide_platform.c
index d3bc3f24e05..051b4ab0f35 100644
--- a/drivers/ide/legacy/ide_platform.c
+++ b/drivers/ide/legacy/ide_platform.c
@@ -44,16 +44,19 @@ static void __devinit plat_ide_setup_ports(hw_regs_t *hw,
hw->chipset = ide_generic;
}
+static const struct ide_port_info platform_ide_port_info = {
+ .host_flags = IDE_HFLAG_NO_DMA,
+};
+
static int __devinit plat_ide_probe(struct platform_device *pdev)
{
struct resource *res_base, *res_alt, *res_irq;
void __iomem *base, *alt_base;
- ide_hwif_t *hwif;
struct pata_platform_info *pdata;
- u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
- int ret = 0;
- int mmio = 0;
- hw_regs_t hw;
+ struct ide_host *host;
+ int ret = 0, mmio = 0;
+ hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
+ struct ide_port_info d = platform_ide_port_info;
pdata = pdev->dev.platform_data;
@@ -89,28 +92,18 @@ static int __devinit plat_ide_probe(struct platform_device *pdev)
res_alt->start, res_alt->end - res_alt->start + 1);
}
- hwif = ide_find_port();
- if (!hwif) {
- ret = -ENODEV;
- goto out;
- }
-
memset(&hw, 0, sizeof(hw));
plat_ide_setup_ports(&hw, base, alt_base, pdata, res_irq->start);
hw.dev = &pdev->dev;
- ide_init_port_hw(hwif, &hw);
+ if (mmio)
+ d.host_flags |= IDE_HFLAG_MMIO;
- if (mmio) {
- hwif->host_flags = IDE_HFLAG_MMIO;
- default_hwif_mmiops(hwif);
- }
-
- idx[0] = hwif->index;
-
- ide_device_add(idx, NULL);
+ ret = ide_host_add(&d, hws, &host);
+ if (ret)
+ goto out;
- platform_set_drvdata(pdev, hwif);
+ platform_set_drvdata(pdev, host);
return 0;
@@ -120,9 +113,9 @@ out:
static int __devexit plat_ide_remove(struct platform_device *pdev)
{
- ide_hwif_t *hwif = pdev->dev.driver_data;
+ struct ide_host *host = pdev->dev.driver_data;
- ide_unregister(hwif);
+ ide_host_remove(host);
return 0;
}
diff --git a/drivers/ide/legacy/macide.c b/drivers/ide/legacy/macide.c
index caa2632dd08..a0bb167980e 100644
--- a/drivers/ide/legacy/macide.c
+++ b/drivers/ide/legacy/macide.c
@@ -78,6 +78,8 @@ static void __init macide_setup_ports(hw_regs_t *hw, unsigned long base,
hw->irq = irq;
hw->ack_intr = ack_intr;
+
+ hw->chipset = ide_generic;
}
static const char *mac_ide_name[] =
@@ -89,11 +91,10 @@ static const char *mac_ide_name[] =
static int __init macide_init(void)
{
- ide_hwif_t *hwif;
ide_ack_intr_t *ack_intr;
unsigned long base;
int irq;
- hw_regs_t hw;
+ hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
if (!MACH_IS_MAC)
return -ENODEV;
@@ -123,18 +124,7 @@ static int __init macide_init(void)
macide_setup_ports(&hw, base, irq, ack_intr);
- hwif = ide_find_port();
- if (hwif) {
- u8 index = hwif->index;
- u8 idx[4] = { index, 0xff, 0xff, 0xff };
-
- ide_init_port_data(hwif, index);
- ide_init_port_hw(hwif, &hw);
-
- ide_device_add(idx, NULL);
- }
-
- return 0;
+ return ide_host_add(NULL, hws, NULL);
}
module_init(macide_init);
diff --git a/drivers/ide/legacy/q40ide.c b/drivers/ide/legacy/q40ide.c
index 6f535d00e63..4abd8fc7819 100644
--- a/drivers/ide/legacy/q40ide.c
+++ b/drivers/ide/legacy/q40ide.c
@@ -70,6 +70,8 @@ static void q40_ide_setup_ports(hw_regs_t *hw, unsigned long base,
hw->irq = irq;
hw->ack_intr = ack_intr;
+
+ hw->chipset = ide_generic;
}
static void q40ide_input_data(ide_drive_t *drive, struct request *rq,
@@ -94,6 +96,27 @@ static void q40ide_output_data(ide_drive_t *drive, struct request *rq,
outsw_swapw(data_addr, buf, (len + 1) / 2);
}
+/* Q40 has a byte-swapped IDE interface */
+static const struct ide_tp_ops q40ide_tp_ops = {
+ .exec_command = ide_exec_command,
+ .read_status = ide_read_status,
+ .read_altstatus = ide_read_altstatus,
+ .read_sff_dma_status = ide_read_sff_dma_status,
+
+ .set_irq = ide_set_irq,
+
+ .tf_load = ide_tf_load,
+ .tf_read = ide_tf_read,
+
+ .input_data = q40ide_input_data,
+ .output_data = q40ide_output_data,
+};
+
+static const struct ide_port_info q40ide_port_info = {
+ .tp_ops = &q40ide_tp_ops,
+ .host_flags = IDE_HFLAG_NO_DMA,
+};
+
/*
* the static array is needed to have the name reported in /proc/ioports,
* hwif->name unfortunately isn't available yet
@@ -109,9 +132,7 @@ static const char *q40_ide_names[Q40IDE_NUM_HWIFS]={
static int __init q40ide_init(void)
{
int i;
- ide_hwif_t *hwif;
- const char *name;
- u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
+ hw_regs_t hw[Q40IDE_NUM_HWIFS], *hws[] = { NULL, NULL, NULL, NULL };
if (!MACH_IS_Q40)
return -ENODEV;
@@ -119,9 +140,8 @@ static int __init q40ide_init(void)
printk(KERN_INFO "ide: Q40 IDE controller\n");
for (i = 0; i < Q40IDE_NUM_HWIFS; i++) {
- hw_regs_t hw;
+ const char *name = q40_ide_names[i];
- name = q40_ide_names[i];
if (!request_region(pcide_bases[i], 8, name)) {
printk("could not reserve ports %lx-%lx for %s\n",
pcide_bases[i],pcide_bases[i]+8,name);
@@ -133,27 +153,13 @@ static int __init q40ide_init(void)
release_region(pcide_bases[i], 8);
continue;
}
- q40_ide_setup_ports(&hw, pcide_bases[i],
- NULL,
-// m68kide_iops,
+ q40_ide_setup_ports(&hw[i], pcide_bases[i], NULL,
q40ide_default_irq(pcide_bases[i]));
- hwif = ide_find_port();
- if (hwif) {
- ide_init_port_data(hwif, hwif->index);
- ide_init_port_hw(hwif, &hw);
-
- /* Q40 has a byte-swapped IDE interface */
- hwif->input_data = q40ide_input_data;
- hwif->output_data = q40ide_output_data;
-
- idx[i] = hwif->index;
- }
+ hws[i] = &hw[i];
}
- ide_device_add(idx, NULL);
-
- return 0;
+ return ide_host_add(&q40ide_port_info, hws, NULL);
}
module_init(q40ide_init);
diff --git a/drivers/ide/legacy/qd65xx.c b/drivers/ide/legacy/qd65xx.c
index 6424af15432..2338f344ea2 100644
--- a/drivers/ide/legacy/qd65xx.c
+++ b/drivers/ide/legacy/qd65xx.c
@@ -110,7 +110,7 @@ static void qd65xx_select(ide_drive_t *drive)
static u8 qd6500_compute_timing (ide_hwif_t *hwif, int active_time, int recovery_time)
{
- int clk = ide_vlb_clk ? ide_vlb_clk : system_bus_clock();
+ int clk = ide_vlb_clk ? ide_vlb_clk : 50;
u8 act_cyc, rec_cyc;
if (clk <= 33) {
@@ -132,7 +132,7 @@ static u8 qd6500_compute_timing (ide_hwif_t *hwif, int active_time, int recovery
static u8 qd6580_compute_timing (int active_time, int recovery_time)
{
- int clk = ide_vlb_clk ? ide_vlb_clk : system_bus_clock();
+ int clk = ide_vlb_clk ? ide_vlb_clk : 50;
u8 act_cyc, rec_cyc;
act_cyc = 17 - IDE_IN(active_time * clk / 1000 + 1, 2, 17);
@@ -207,6 +207,7 @@ static void qd6500_set_pio_mode(ide_drive_t *drive, const u8 pio)
static void qd6580_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
ide_hwif_t *hwif = drive->hwif;
+ struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio);
unsigned int cycle_time;
int active_time = 175;
int recovery_time = 415; /* worst case values from the dos driver */
@@ -236,7 +237,7 @@ static void qd6580_set_pio_mode(ide_drive_t *drive, const u8 pio)
active_time = 110;
recovery_time = cycle_time - 120;
} else {
- active_time = ide_pio_timings[pio].active_time;
+ active_time = t->active;
recovery_time = cycle_time - active_time;
}
}
@@ -281,17 +282,18 @@ static int __init qd_testreg(int port)
return (readreg != QD_TESTVAL);
}
-static void __init qd6500_port_init_devs(ide_hwif_t *hwif)
+static void __init qd6500_init_dev(ide_drive_t *drive)
{
+ ide_hwif_t *hwif = drive->hwif;
u8 base = (hwif->config_data & 0xff00) >> 8;
u8 config = QD_CONFIG(hwif);
- hwif->drives[0].drive_data = QD6500_DEF_DATA;
- hwif->drives[1].drive_data = QD6500_DEF_DATA;
+ drive->drive_data = QD6500_DEF_DATA;
}
-static void __init qd6580_port_init_devs(ide_hwif_t *hwif)
+static void __init qd6580_init_dev(ide_drive_t *drive)
{
+ ide_hwif_t *hwif = drive->hwif;
u16 t1, t2;
u8 base = (hwif->config_data & 0xff00) >> 8;
u8 config = QD_CONFIG(hwif);
@@ -302,18 +304,17 @@ static void __init qd6580_port_init_devs(ide_hwif_t *hwif)
} else
t2 = t1 = hwif->channel ? QD6580_DEF_DATA2 : QD6580_DEF_DATA;
- hwif->drives[0].drive_data = t1;
- hwif->drives[1].drive_data = t2;
+ drive->drive_data = drive->select.b.unit ? t2 : t1;
}
static const struct ide_port_ops qd6500_port_ops = {
- .port_init_devs = qd6500_port_init_devs,
+ .init_dev = qd6500_init_dev,
.set_pio_mode = qd6500_set_pio_mode,
.selectproc = qd65xx_select,
};
static const struct ide_port_ops qd6580_port_ops = {
- .port_init_devs = qd6580_port_init_devs,
+ .init_dev = qd6580_init_dev,
.set_pio_mode = qd6580_set_pio_mode,
.selectproc = qd65xx_select,
};
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-27 00:31:15 +0000