diff options
Diffstat (limited to 'drivers/ide/pci/aec62xx.c')
-rw-r--r-- | drivers/ide/pci/aec62xx.c | 76 |
1 files changed, 48 insertions, 28 deletions
diff --git a/drivers/ide/pci/aec62xx.c b/drivers/ide/pci/aec62xx.c index fbc43e121e6..e0c8fe7d9fe 100644 --- a/drivers/ide/pci/aec62xx.c +++ b/drivers/ide/pci/aec62xx.c @@ -13,6 +13,8 @@ #include <asm/io.h> +#define DRV_NAME "aec62xx" + struct chipset_bus_clock_list_entry { u8 xfer_speed; u8 chipset_settings; @@ -59,10 +61,6 @@ static const struct chipset_bus_clock_list_entry aec6xxx_34_base [] = { { 0, 0x00, 0x00 } }; -#define BUSCLOCK(D) \ - ((struct chipset_bus_clock_list_entry *) pci_get_drvdata((D))) - - /* * TO DO: active tuning and correction of cards without a bios. */ @@ -88,6 +86,8 @@ static void aec6210_set_mode(ide_drive_t *drive, const u8 speed) { ide_hwif_t *hwif = HWIF(drive); struct pci_dev *dev = to_pci_dev(hwif->dev); + struct ide_host *host = pci_get_drvdata(dev); + struct chipset_bus_clock_list_entry *bus_clock = host->host_priv; u16 d_conf = 0; u8 ultra = 0, ultra_conf = 0; u8 tmp0 = 0, tmp1 = 0, tmp2 = 0; @@ -96,7 +96,7 @@ static void aec6210_set_mode(ide_drive_t *drive, const u8 speed) local_irq_save(flags); /* 0x40|(2*drive->dn): Active, 0x41|(2*drive->dn): Recovery */ pci_read_config_word(dev, 0x40|(2*drive->dn), &d_conf); - tmp0 = pci_bus_clock_list(speed, BUSCLOCK(dev)); + tmp0 = pci_bus_clock_list(speed, bus_clock); d_conf = ((tmp0 & 0xf0) << 4) | (tmp0 & 0xf); pci_write_config_word(dev, 0x40|(2*drive->dn), d_conf); @@ -104,7 +104,7 @@ static void aec6210_set_mode(ide_drive_t *drive, const u8 speed) tmp2 = 0x00; pci_read_config_byte(dev, 0x54, &ultra); tmp1 = ((0x00 << (2*drive->dn)) | (ultra & ~(3 << (2*drive->dn)))); - ultra_conf = pci_bus_clock_list_ultra(speed, BUSCLOCK(dev)); + ultra_conf = pci_bus_clock_list_ultra(speed, bus_clock); tmp2 = ((ultra_conf << (2*drive->dn)) | (tmp1 & ~(3 << (2*drive->dn)))); pci_write_config_byte(dev, 0x54, tmp2); local_irq_restore(flags); @@ -114,6 +114,8 @@ static void aec6260_set_mode(ide_drive_t *drive, const u8 speed) { ide_hwif_t *hwif = HWIF(drive); struct pci_dev *dev = to_pci_dev(hwif->dev); + struct ide_host *host = pci_get_drvdata(dev); + struct chipset_bus_clock_list_entry *bus_clock = host->host_priv; u8 unit = (drive->select.b.unit & 0x01); u8 tmp1 = 0, tmp2 = 0; u8 ultra = 0, drive_conf = 0, ultra_conf = 0; @@ -122,12 +124,12 @@ static void aec6260_set_mode(ide_drive_t *drive, const u8 speed) local_irq_save(flags); /* high 4-bits: Active, low 4-bits: Recovery */ pci_read_config_byte(dev, 0x40|drive->dn, &drive_conf); - drive_conf = pci_bus_clock_list(speed, BUSCLOCK(dev)); + drive_conf = pci_bus_clock_list(speed, bus_clock); pci_write_config_byte(dev, 0x40|drive->dn, drive_conf); pci_read_config_byte(dev, (0x44|hwif->channel), &ultra); tmp1 = ((0x00 << (4*unit)) | (ultra & ~(7 << (4*unit)))); - ultra_conf = pci_bus_clock_list_ultra(speed, BUSCLOCK(dev)); + ultra_conf = pci_bus_clock_list_ultra(speed, bus_clock); tmp2 = ((ultra_conf << (4*unit)) | (tmp1 & ~(7 << (4*unit)))); pci_write_config_byte(dev, (0x44|hwif->channel), tmp2); local_irq_restore(flags); @@ -138,15 +140,8 @@ static void aec_set_pio_mode(ide_drive_t *drive, const u8 pio) drive->hwif->port_ops->set_dma_mode(drive, pio + XFER_PIO_0); } -static unsigned int __devinit init_chipset_aec62xx(struct pci_dev *dev, const char *name) +static unsigned int __devinit init_chipset_aec62xx(struct pci_dev *dev) { - int bus_speed = ide_pci_clk ? ide_pci_clk : 33; - - if (bus_speed <= 33) - pci_set_drvdata(dev, (void *) aec6xxx_33_base); - else - pci_set_drvdata(dev, (void *) aec6xxx_34_base); - /* These are necessary to get AEC6280 Macintosh cards to work */ if ((dev->device == PCI_DEVICE_ID_ARTOP_ATP865) || (dev->device == PCI_DEVICE_ID_ARTOP_ATP865R)) { @@ -187,8 +182,8 @@ static const struct ide_port_ops atp86x_port_ops = { }; static const struct ide_port_info aec62xx_chipsets[] __devinitdata = { - { /* 0 */ - .name = "AEC6210", + { /* 0: AEC6210 */ + .name = DRV_NAME, .init_chipset = init_chipset_aec62xx, .enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}}, .port_ops = &atp850_port_ops, @@ -199,8 +194,9 @@ static const struct ide_port_info aec62xx_chipsets[] __devinitdata = { .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA2, - },{ /* 1 */ - .name = "AEC6260", + }, + { /* 1: AEC6260 */ + .name = DRV_NAME, .init_chipset = init_chipset_aec62xx, .port_ops = &atp86x_port_ops, .host_flags = IDE_HFLAG_NO_ATAPI_DMA | IDE_HFLAG_NO_AUTODMA | @@ -208,8 +204,9 @@ static const struct ide_port_info aec62xx_chipsets[] __devinitdata = { .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA4, - },{ /* 2 */ - .name = "AEC6260R", + }, + { /* 2: AEC6260R */ + .name = DRV_NAME, .init_chipset = init_chipset_aec62xx, .enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}}, .port_ops = &atp86x_port_ops, @@ -218,8 +215,9 @@ static const struct ide_port_info aec62xx_chipsets[] __devinitdata = { .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA4, - },{ /* 3 */ - .name = "AEC6280", + }, + { /* 3: AEC6280 */ + .name = DRV_NAME, .init_chipset = init_chipset_aec62xx, .port_ops = &atp86x_port_ops, .host_flags = IDE_HFLAG_NO_ATAPI_DMA | @@ -227,8 +225,9 @@ static const struct ide_port_info aec62xx_chipsets[] __devinitdata = { .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, - },{ /* 4 */ - .name = "AEC6280R", + }, + { /* 4: AEC6280R */ + .name = DRV_NAME, .init_chipset = init_chipset_aec62xx, .enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}}, .port_ops = &atp86x_port_ops, @@ -254,10 +253,17 @@ static const struct ide_port_info aec62xx_chipsets[] __devinitdata = { static int __devinit aec62xx_init_one(struct pci_dev *dev, const struct pci_device_id *id) { + const struct chipset_bus_clock_list_entry *bus_clock; struct ide_port_info d; u8 idx = id->driver_data; + int bus_speed = ide_pci_clk ? ide_pci_clk : 33; int err; + if (bus_speed <= 33) + bus_clock = aec6xxx_33_base; + else + bus_clock = aec6xxx_34_base; + err = pci_enable_device(dev); if (err) return err; @@ -268,18 +274,25 @@ static int __devinit aec62xx_init_one(struct pci_dev *dev, const struct pci_devi unsigned long dma_base = pci_resource_start(dev, 4); if (inb(dma_base + 2) & 0x10) { - d.name = (idx == 4) ? "AEC6880R" : "AEC6880"; + printk(KERN_INFO DRV_NAME " %s: AEC6880%s card detected" + "\n", pci_name(dev), (idx == 4) ? "R" : ""); d.udma_mask = ATA_UDMA6; } } - err = ide_setup_pci_device(dev, &d); + err = ide_pci_init_one(dev, &d, (void *)bus_clock); if (err) pci_disable_device(dev); return err; } +static void __devexit aec62xx_remove(struct pci_dev *dev) +{ + ide_pci_remove(dev); + pci_disable_device(dev); +} + static const struct pci_device_id aec62xx_pci_tbl[] = { { PCI_VDEVICE(ARTOP, PCI_DEVICE_ID_ARTOP_ATP850UF), 0 }, { PCI_VDEVICE(ARTOP, PCI_DEVICE_ID_ARTOP_ATP860), 1 }, @@ -294,6 +307,7 @@ static struct pci_driver driver = { .name = "AEC62xx_IDE", .id_table = aec62xx_pci_tbl, .probe = aec62xx_init_one, + .remove = aec62xx_remove, }; static int __init aec62xx_ide_init(void) @@ -301,7 +315,13 @@ static int __init aec62xx_ide_init(void) return ide_pci_register_driver(&driver); } +static void __exit aec62xx_ide_exit(void) +{ + pci_unregister_driver(&driver); +} + module_init(aec62xx_ide_init); +module_exit(aec62xx_ide_exit); MODULE_AUTHOR("Andre Hedrick"); MODULE_DESCRIPTION("PCI driver module for ARTOP AEC62xx IDE"); |