diff options
Diffstat (limited to 'drivers/ide/pci/cs5520.c')
| -rw-r--r-- | drivers/ide/pci/cs5520.c | 64 |
1 files changed, 14 insertions, 50 deletions
diff --git a/drivers/ide/pci/cs5520.c b/drivers/ide/pci/cs5520.c index 992b1cf8db6..151844fcbb0 100644 --- a/drivers/ide/pci/cs5520.c +++ b/drivers/ide/pci/cs5520.c @@ -41,6 +41,8 @@ #include <linux/ide.h> #include <linux/dma-mapping.h> +#define DRV_NAME "cs5520" + struct pio_clocks { int address; @@ -62,8 +64,6 @@ static void cs5520_set_pio_mode(ide_drive_t *drive, const u8 pio) struct pci_dev *pdev = to_pci_dev(hwif->dev); int controller = drive->dn > 1 ? 1 : 0; - /* FIXME: if DMA = 1 do we need to set the DMA bit here ? */ - /* 8bit CAT/CRT - 8bit command timing for channel */ pci_write_config_byte(pdev, 0x62 + controller, (cs5520_pio_clocks[pio].recovery << 4) | @@ -89,52 +89,17 @@ static void cs5520_set_dma_mode(ide_drive_t *drive, const u8 speed) cs5520_set_pio_mode(drive, 0); } -/* - * We wrap the DMA activate to set the vdma flag. This is needed - * so that the IDE DMA layer issues PIO not DMA commands over the - * DMA channel - * - * ATAPI is harder so disable it for now using IDE_HFLAG_NO_ATAPI_DMA - */ - -static void cs5520_dma_host_set(ide_drive_t *drive, int on) -{ - drive->vdma = on; - ide_dma_host_set(drive, on); -} - static const struct ide_port_ops cs5520_port_ops = { .set_pio_mode = cs5520_set_pio_mode, .set_dma_mode = cs5520_set_dma_mode, }; -static const struct ide_dma_ops cs5520_dma_ops = { - .dma_host_set = cs5520_dma_host_set, - .dma_setup = ide_dma_setup, - .dma_exec_cmd = ide_dma_exec_cmd, - .dma_start = ide_dma_start, - .dma_end = __ide_dma_end, - .dma_test_irq = ide_dma_test_irq, - .dma_lost_irq = ide_dma_lost_irq, - .dma_timeout = ide_dma_timeout, -}; - -/* FIXME: VDMA is disabled because it caused system hangs */ -#define DECLARE_CS_DEV(name_str) \ - { \ - .name = name_str, \ - .port_ops = &cs5520_port_ops, \ - .dma_ops = &cs5520_dma_ops, \ - .host_flags = IDE_HFLAG_ISA_PORTS | \ - IDE_HFLAG_CS5520 | \ - IDE_HFLAG_NO_ATAPI_DMA | \ - IDE_HFLAG_ABUSE_SET_DMA_MODE, \ - .pio_mask = ATA_PIO4, \ - } - -static const struct ide_port_info cyrix_chipsets[] __devinitdata = { - /* 0 */ DECLARE_CS_DEV("Cyrix 5510"), - /* 1 */ DECLARE_CS_DEV("Cyrix 5520") +static const struct ide_port_info cyrix_chipset __devinitdata = { + .name = DRV_NAME, + .enablebits = { { 0x60, 0x01, 0x01 }, { 0x60, 0x02, 0x02 } }, + .port_ops = &cs5520_port_ops, + .host_flags = IDE_HFLAG_ISA_PORTS | IDE_HFLAG_CS5520, + .pio_mask = ATA_PIO4, }; /* @@ -145,8 +110,8 @@ static const struct ide_port_info cyrix_chipsets[] __devinitdata = { static int __devinit cs5520_init_one(struct pci_dev *dev, const struct pci_device_id *id) { - const struct ide_port_info *d = &cyrix_chipsets[id->driver_data]; - u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; + const struct ide_port_info *d = &cyrix_chipset; + hw_regs_t hw[4], *hws[] = { NULL, NULL, NULL, NULL }; ide_setup_pci_noise(dev, d); @@ -159,7 +124,8 @@ static int __devinit cs5520_init_one(struct pci_dev *dev, const struct pci_devic } pci_set_master(dev); if (pci_set_dma_mask(dev, DMA_32BIT_MASK)) { - printk(KERN_WARNING "cs5520: No suitable DMA available.\n"); + printk(KERN_WARNING "%s: No suitable DMA available.\n", + d->name); return -ENODEV; } @@ -168,11 +134,9 @@ static int __devinit cs5520_init_one(struct pci_dev *dev, const struct pci_devic * do all the device setup for us */ - ide_pci_setup_ports(dev, d, 14, &idx[0]); - - ide_device_add(idx, d); + ide_pci_setup_ports(dev, d, 14, &hw[0], &hws[0]); - return 0; + return ide_host_add(d, hws, NULL); } static const struct pci_device_id cs5520_pci_tbl[] = { |