summaryrefslogtreecommitdiffstats
path: root/drivers/ide/pci/it821x.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ide/pci/it821x.c')
-rw-r--r--drivers/ide/pci/it821x.c19
1 files changed, 10 insertions, 9 deletions
diff --git a/drivers/ide/pci/it821x.c b/drivers/ide/pci/it821x.c
index a38ec47423a..7f4db1c0a4f 100644
--- a/drivers/ide/pci/it821x.c
+++ b/drivers/ide/pci/it821x.c
@@ -418,7 +418,7 @@ static void it821x_set_dma_mode(ide_drive_t *drive, const u8 speed)
}
/**
- * ata66_it821x - check for 80 pin cable
+ * it821x_cable_detect - cable detection
* @hwif: interface to check
*
* Check for the presence of an ATA66 capable cable on the
@@ -426,7 +426,7 @@ static void it821x_set_dma_mode(ide_drive_t *drive, const u8 speed)
* the needed logic onboard.
*/
-static u8 __devinit ata66_it821x(ide_hwif_t *hwif)
+static u8 __devinit it821x_cable_detect(ide_hwif_t *hwif)
{
/* The reference driver also only does disk side */
return ATA_CBL_PATA80;
@@ -527,8 +527,6 @@ static void __devinit init_hwif_it821x(ide_hwif_t *hwif)
struct it821x_dev *idev = itdevs[hwif->channel];
u8 conf;
- hwif->quirkproc = &it821x_quirkproc;
-
ide_set_hwifdata(hwif, idev);
pci_read_config_byte(dev, 0x50, &conf);
@@ -563,17 +561,12 @@ static void __devinit init_hwif_it821x(ide_hwif_t *hwif)
}
if (idev->smart == 0) {
- hwif->set_pio_mode = &it821x_set_pio_mode;
- hwif->set_dma_mode = &it821x_set_dma_mode;
-
/* MWDMA/PIO clock switching for pass through mode */
hwif->dma_start = &it821x_dma_start;
hwif->ide_dma_end = &it821x_dma_end;
} else
hwif->host_flags |= IDE_HFLAG_NO_SET_MODE;
- hwif->cable_detect = ata66_it821x;
-
if (hwif->dma_base == 0)
return;
@@ -613,12 +606,20 @@ static unsigned int __devinit init_chipset_it821x(struct pci_dev *dev, const cha
return 0;
}
+static const struct ide_port_ops it821x_port_ops = {
+ /* it821x_set_{pio,dma}_mode() are only used in pass-through mode */
+ .set_pio_mode = it821x_set_pio_mode,
+ .set_dma_mode = it821x_set_dma_mode,
+ .quirkproc = it821x_quirkproc,
+ .cable_detect = it821x_cable_detect,
+};
#define DECLARE_ITE_DEV(name_str) \
{ \
.name = name_str, \
.init_chipset = init_chipset_it821x, \
.init_hwif = init_hwif_it821x, \
+ .port_ops = &it821x_port_ops, \
.pio_mask = ATA_PIO4, \
}