1 files changed, 35 insertions, 19 deletions

diff --git a/drivers/ide/pci/it821x.c b/drivers/ide/pci/it821x.c
index 1597f0cc1bf..6ab04115286 100644
--- a/drivers/ide/pci/it821x.c
+++ b/drivers/ide/pci/it821x.c
@@ -418,7 +418,7 @@ static void it821x_set_dma_mode(ide_drive_t *drive, const u8 speed)
 }
 
 /**
- *	ata66_it821x	-	check for 80 pin cable
+ *	it821x_cable_detect	-	cable detection
  *	@hwif: interface to check
  *
  *	Check for the presence of an ATA66 capable cable on the
@@ -426,7 +426,7 @@ static void it821x_set_dma_mode(ide_drive_t *drive, const u8 speed)
  *	the needed logic onboard.
  */
 
-static u8 __devinit ata66_it821x(ide_hwif_t *hwif)
+static u8 __devinit it821x_cable_detect(ide_hwif_t *hwif)
 {
 	/* The reference driver also only does disk side */
 	return ATA_CBL_PATA80;
@@ -511,6 +511,11 @@ static void __devinit it821x_quirkproc(ide_drive_t *drive)
 
 }
 
+static struct ide_dma_ops it821x_pass_through_dma_ops = {
+	.dma_start		= it821x_dma_start,
+	.dma_end		= it821x_dma_end,
+};
+
 /**
  *	init_hwif_it821x	-	set up hwif structs
  *	@hwif: interface to set up
@@ -523,16 +528,10 @@ static void __devinit it821x_quirkproc(ide_drive_t *drive)
 static void __devinit init_hwif_it821x(ide_hwif_t *hwif)
 {
 	struct pci_dev *dev = to_pci_dev(hwif->dev);
-	struct it821x_dev *idev = kzalloc(sizeof(struct it821x_dev), GFP_KERNEL);
+	struct it821x_dev **itdevs = (struct it821x_dev **)pci_get_drvdata(dev);
+	struct it821x_dev *idev = itdevs[hwif->channel];
 	u8 conf;
 
-	hwif->quirkproc = &it821x_quirkproc;
-
-	if (idev == NULL) {
-		printk(KERN_ERR "it821x: out of memory, falling back to legacy behaviour.\n");
-		return;
-	}
-
 	ide_set_hwifdata(hwif, idev);
 
 	pci_read_config_byte(dev, 0x50, &conf);
@@ -567,17 +566,11 @@ static void __devinit init_hwif_it821x(ide_hwif_t *hwif)
 	}
 
 	if (idev->smart == 0) {
-		hwif->set_pio_mode = &it821x_set_pio_mode;
-		hwif->set_dma_mode = &it821x_set_dma_mode;
-
 		/* MWDMA/PIO clock switching for pass through mode */
-		hwif->dma_start = &it821x_dma_start;
-		hwif->ide_dma_end = &it821x_dma_end;
+		hwif->dma_ops = &it821x_pass_through_dma_ops;
 	} else
 		hwif->host_flags |= IDE_HFLAG_NO_SET_MODE;
 
-	hwif->cable_detect = ata66_it821x;
-
 	if (hwif->dma_base == 0)
 		return;
 
@@ -617,13 +610,20 @@ static unsigned int __devinit init_chipset_it821x(struct pci_dev *dev, const cha
 	return 0;
 }
 
+static const struct ide_port_ops it821x_port_ops = {
+	/* it821x_set_{pio,dma}_mode() are only used in pass-through mode */
+	.set_pio_mode		= it821x_set_pio_mode,
+	.set_dma_mode		= it821x_set_dma_mode,
+	.quirkproc		= it821x_quirkproc,
+	.cable_detect		= it821x_cable_detect,
+};
 
 #define DECLARE_ITE_DEV(name_str)			\
 	{						\
 		.name		= name_str,		\
 		.init_chipset	= init_chipset_it821x,	\
 		.init_hwif	= init_hwif_it821x,	\
-		.host_flags	= IDE_HFLAG_BOOTABLE,	\
+		.port_ops	= &it821x_port_ops,	\
 		.pio_mask	= ATA_PIO4,		\
 	}
 
@@ -642,6 +642,22 @@ static const struct ide_port_info it821x_chipsets[] __devinitdata = {
 
 static int __devinit it821x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
+	struct it821x_dev *itdevs[2] = { NULL, NULL} , *itdev;
+	unsigned int i;
+
+	for (i = 0; i < 2; i++) {
+		itdev = kzalloc(sizeof(*itdev), GFP_KERNEL);
+		if (itdev == NULL) {
+			kfree(itdevs[0]);
+			printk(KERN_ERR "it821x: out of memory\n");
+			return -ENOMEM;
+		}
+
+		itdevs[i] = itdev;
+	}
+
+	pci_set_drvdata(dev, itdevs);
+
 	return ide_setup_pci_device(dev, &it821x_chipsets[id->driver_data]);
 }
 
@@ -667,7 +683,7 @@ static int __init it821x_ide_init(void)
 module_init(it821x_ide_init);
 
 module_param_named(noraid, it8212_noraid, int, S_IRUGO);
-MODULE_PARM_DESC(it8212_noraid, "Force card into bypass mode");
+MODULE_PARM_DESC(noraid, "Force card into bypass mode");
 
 MODULE_AUTHOR("Alan Cox");
 MODULE_DESCRIPTION("PCI driver module for the ITE 821x");