1 files changed, 25 insertions, 26 deletions

diff --git a/drivers/ide/pci/it821x.c b/drivers/ide/pci/it821x.c
index 4a1508a707c..31d4e6aef1b 100644
--- a/drivers/ide/pci/it821x.c
+++ b/drivers/ide/pci/it821x.c
@@ -446,8 +446,7 @@ static u8 it821x_cable_detect(ide_hwif_t *hwif)
 static void it821x_quirkproc(ide_drive_t *drive)
 {
 	struct it821x_dev *itdev = ide_get_hwifdata(drive->hwif);
-	struct hd_driveid *id = drive->id;
-	u16 *idbits = (u16 *)drive->id;
+	u16 *id = drive->id;
 
 	if (!itdev->smart) {
 		/*
@@ -466,36 +465,36 @@ static void it821x_quirkproc(ide_drive_t *drive)
 	 */
 
 		/* Check for RAID v native */
-		if(strstr(id->model, "Integrated Technology Express")) {
+		if (strstr((char *)&id[ATA_ID_PROD],
+			   "Integrated Technology Express")) {
 			/* In raid mode the ident block is slightly buggy
 			   We need to set the bits so that the IDE layer knows
 			   LBA28. LBA48 and DMA ar valid */
-			id->capability |= 3;		/* LBA28, DMA */
-			id->command_set_2 |= 0x0400;	/* LBA48 valid */
-			id->cfs_enable_2 |= 0x0400;	/* LBA48 on */
+			drive->driveid->capability |= 3;      /* LBA28, DMA */
+			id[ATA_ID_COMMAND_SET_2] |= 0x0400;   /* LBA48 valid */
+			id[ATA_ID_CFS_ENABLE_2]  |= 0x0400;   /* LBA48 on */
 			/* Reporting logic */
 			printk(KERN_INFO "%s: IT8212 %sRAID %d volume",
-				drive->name,
-				idbits[147] ? "Bootable ":"",
-				idbits[129]);
-				if(idbits[129] != 1)
-					printk("(%dK stripe)", idbits[146]);
-				printk(".\n");
+				drive->name, id[147] ? "Bootable " : "",
+				id[ATA_ID_CSFO]);
+			if (id[ATA_ID_CSFO] != 1)
+				printk(KERN_CONT "(%dK stripe)", id[146]);
+			printk(KERN_CONT ".\n");
 		} else {
 			/* Non RAID volume. Fixups to stop the core code
 			   doing unsupported things */
-			id->field_valid &= 3;
-			id->queue_depth = 0;
-			id->command_set_1 = 0;
-			id->command_set_2 &= 0xC400;
-			id->cfsse &= 0xC000;
-			id->cfs_enable_1 = 0;
-			id->cfs_enable_2 &= 0xC400;
-			id->csf_default &= 0xC000;
-			id->word127 = 0;
-			id->dlf = 0;
-			id->csfo = 0;
-			id->cfa_power = 0;
+			id[ATA_ID_FIELD_VALID]	 &= 3;
+			id[ATA_ID_QUEUE_DEPTH]	  = 0;
+			id[ATA_ID_COMMAND_SET_1]  = 0;
+			id[ATA_ID_COMMAND_SET_2] &= 0xC400;
+			id[ATA_ID_CFSSE]	 &= 0xC000;
+			id[ATA_ID_CFS_ENABLE_1]	  = 0;
+			id[ATA_ID_CFS_ENABLE_2]	 &= 0xC400;
+			id[ATA_ID_CSF_DEFAULT]	 &= 0xC000;
+			id[127]			  = 0;
+			id[ATA_ID_DLF]		  = 0;
+			id[ATA_ID_CSFO]		  = 0;
+			id[ATA_ID_CFA_POWER]	  = 0;
 			printk(KERN_INFO "%s: Performing identify fixups.\n",
 				drive->name);
 		}
@@ -505,8 +504,8 @@ static void it821x_quirkproc(ide_drive_t *drive)
 		 * IDE core that DMA is supported (it821x hardware
 		 * takes care of DMA mode programming).
 		 */
-		if (id->capability & 1) {
-			id->dma_mword |= 0x0101;
+		if (drive->driveid->capability & 1) {
+			id[ATA_ID_MWDMA_MODES] |= 0x0101;
 			drive->current_speed = XFER_MW_DMA_0;
 		}
 	}