diff options
Diffstat (limited to 'drivers/ide/pci/piix.c')
-rw-r--r-- | drivers/ide/pci/piix.c | 51 |
1 files changed, 30 insertions, 21 deletions
diff --git a/drivers/ide/pci/piix.c b/drivers/ide/pci/piix.c index 30cfc815fe3..d63f9fdca76 100644 --- a/drivers/ide/pci/piix.c +++ b/drivers/ide/pci/piix.c @@ -48,7 +48,6 @@ #include <linux/module.h> #include <linux/kernel.h> #include <linux/pci.h> -#include <linux/hdreg.h> #include <linux/ide.h> #include <linux/init.h> @@ -205,7 +204,7 @@ static void piix_set_dma_mode(ide_drive_t *drive, const u8 speed) * out to be nice and simple. */ -static unsigned int __devinit init_chipset_ich(struct pci_dev *dev) +static unsigned int init_chipset_ich(struct pci_dev *dev) { u32 extra = 0; @@ -216,17 +215,26 @@ static unsigned int __devinit init_chipset_ich(struct pci_dev *dev) } /** - * piix_dma_clear_irq - clear BMDMA status - * @drive: IDE drive to clear + * ich_clear_irq - clear BMDMA status + * @drive: IDE drive * - * Called from ide_intr() for PIO interrupts - * to clear BMDMA status as needed by ICHx + * ICHx contollers set DMA INTR no matter DMA or PIO. + * BMDMA status might need to be cleared even for + * PIO interrupts to prevent spurious/lost IRQ. */ -static void piix_dma_clear_irq(ide_drive_t *drive) +static void ich_clear_irq(ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); u8 dma_stat; + /* + * ide_dma_end() needs BMDMA status for error checking. + * So, skip clearing BMDMA status here and leave it + * to ide_dma_end() if this is DMA interrupt. + */ + if (drive->waiting_for_dma || hwif->dma_base == 0) + return; + /* clear the INTR & ERROR bits */ dma_stat = inb(hwif->dma_base + ATA_DMA_STATUS); /* Should we force the bit as well ? */ @@ -250,6 +258,7 @@ static const struct ich_laptop ich_laptop[] = { { 0x27DF, 0x1025, 0x0110 }, /* ICH7 on Acer 3682WLMi */ { 0x27DF, 0x1043, 0x1267 }, /* ICH7 on Asus W5F */ { 0x27DF, 0x103C, 0x30A1 }, /* ICH7 on HP Compaq nc2400 */ + { 0x27DF, 0x1071, 0xD221 }, /* ICH7 on Hercules EC-900 */ { 0x24CA, 0x1025, 0x0061 }, /* ICH4 on Acer Aspire 2023WLMi */ { 0x2653, 0x1043, 0x82D8 }, /* ICH6M on Asus Eee 701 */ /* end marker */ @@ -294,21 +303,19 @@ static void __devinit init_hwif_piix(ide_hwif_t *hwif) hwif->ultra_mask = hwif->mwdma_mask = hwif->swdma_mask = 0; } -static void __devinit init_hwif_ich(ide_hwif_t *hwif) -{ - init_hwif_piix(hwif); - - /* ICHx need to clear the BMDMA status for all interrupts */ - if (hwif->dma_base) - hwif->ide_dma_clear_irq = &piix_dma_clear_irq; -} - static const struct ide_port_ops piix_port_ops = { .set_pio_mode = piix_set_pio_mode, .set_dma_mode = piix_set_dma_mode, .cable_detect = piix_cable_detect, }; +static const struct ide_port_ops ich_port_ops = { + .set_pio_mode = piix_set_pio_mode, + .set_dma_mode = piix_set_dma_mode, + .clear_irq = ich_clear_irq, + .cable_detect = piix_cable_detect, +}; + #ifndef CONFIG_IA64 #define IDE_HFLAGS_PIIX IDE_HFLAG_LEGACY_IRQS #else @@ -332,9 +339,9 @@ static const struct ide_port_ops piix_port_ops = { { \ .name = DRV_NAME, \ .init_chipset = init_chipset_ich, \ - .init_hwif = init_hwif_ich, \ + .init_hwif = init_hwif_piix, \ .enablebits = {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, \ - .port_ops = &piix_port_ops, \ + .port_ops = &ich_port_ops, \ .host_flags = IDE_HFLAGS_PIIX, \ .pio_mask = ATA_PIO4, \ .swdma_mask = ATA_SWDMA2_ONLY, \ @@ -445,22 +452,24 @@ static const struct pci_device_id piix_pci_tbl[] = { }; MODULE_DEVICE_TABLE(pci, piix_pci_tbl); -static struct pci_driver driver = { +static struct pci_driver piix_pci_driver = { .name = "PIIX_IDE", .id_table = piix_pci_tbl, .probe = piix_init_one, .remove = ide_pci_remove, + .suspend = ide_pci_suspend, + .resume = ide_pci_resume, }; static int __init piix_ide_init(void) { piix_check_450nx(); - return ide_pci_register_driver(&driver); + return ide_pci_register_driver(&piix_pci_driver); } static void __exit piix_ide_exit(void) { - pci_unregister_driver(&driver); + pci_unregister_driver(&piix_pci_driver); } module_init(piix_ide_init); |