1 files changed, 99 insertions, 72 deletions

diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c
index 6e9d7655d89..db2b88a369a 100644
--- a/drivers/ide/pci/siimage.c
+++ b/drivers/ide/pci/siimage.c
@@ -44,6 +44,8 @@
 #include <linux/init.h>
 #include <linux/io.h>
 
+#define DRV_NAME "siimage"
+
 /**
  *	pdev_is_sata		-	check if device is SATA
  *	@pdev:	PCI device to check
@@ -127,9 +129,10 @@ static inline unsigned long siimage_seldev(ide_drive_t *drive, int r)
 
 static u8 sil_ioread8(struct pci_dev *dev, unsigned long addr)
 {
+	struct ide_host *host = pci_get_drvdata(dev);
 	u8 tmp = 0;
 
-	if (pci_get_drvdata(dev))
+	if (host->host_priv)
 		tmp = readb((void __iomem *)addr);
 	else
 		pci_read_config_byte(dev, addr, &tmp);
@@ -139,9 +142,10 @@ static u8 sil_ioread8(struct pci_dev *dev, unsigned long addr)
 
 static u16 sil_ioread16(struct pci_dev *dev, unsigned long addr)
 {
+	struct ide_host *host = pci_get_drvdata(dev);
 	u16 tmp = 0;
 
-	if (pci_get_drvdata(dev))
+	if (host->host_priv)
 		tmp = readw((void __iomem *)addr);
 	else
 		pci_read_config_word(dev, addr, &tmp);
@@ -151,7 +155,9 @@ static u16 sil_ioread16(struct pci_dev *dev, unsigned long addr)
 
 static void sil_iowrite8(struct pci_dev *dev, u8 val, unsigned long addr)
 {
-	if (pci_get_drvdata(dev))
+	struct ide_host *host = pci_get_drvdata(dev);
+
+	if (host->host_priv)
 		writeb(val, (void __iomem *)addr);
 	else
 		pci_write_config_byte(dev, addr, val);
@@ -159,7 +165,9 @@ static void sil_iowrite8(struct pci_dev *dev, u8 val, unsigned long addr)
 
 static void sil_iowrite16(struct pci_dev *dev, u16 val, unsigned long addr)
 {
-	if (pci_get_drvdata(dev))
+	struct ide_host *host = pci_get_drvdata(dev);
+
+	if (host->host_priv)
 		writew(val, (void __iomem *)addr);
 	else
 		pci_write_config_word(dev, addr, val);
@@ -167,7 +175,9 @@ static void sil_iowrite16(struct pci_dev *dev, u16 val, unsigned long addr)
 
 static void sil_iowrite32(struct pci_dev *dev, u32 val, unsigned long addr)
 {
-	if (pci_get_drvdata(dev))
+	struct ide_host *host = pci_get_drvdata(dev);
+
+	if (host->host_priv)
 		writel(val, (void __iomem *)addr);
 	else
 		pci_write_config_dword(dev, addr, val);
@@ -334,7 +344,7 @@ static int siimage_io_dma_test_irq(ide_drive_t *drive)
 	unsigned long addr	= siimage_selreg(hwif, 1);
 
 	/* return 1 if INTR asserted */
-	if (hwif->INB(hwif->dma_status) & 4)
+	if (inb(hwif->dma_base + ATA_DMA_STATUS) & 4)
 		return 1;
 
 	/* return 1 if Device INTR asserted */
@@ -382,7 +392,7 @@ static int siimage_mmio_dma_test_irq(ide_drive_t *drive)
 	}
 
 	/* return 1 if INTR asserted */
-	if (readb((void __iomem *)hwif->dma_status) & 0x04)
+	if (readb((void __iomem *)(hwif->dma_base + ATA_DMA_STATUS)) & 4)
 		return 1;
 
 	/* return 1 if Device INTR asserted */
@@ -445,66 +455,24 @@ static void sil_sata_pre_reset(ide_drive_t *drive)
 }
 
 /**
- *	setup_mmio_siimage	-	switch controller into MMIO mode
- *	@dev: PCI device we are configuring
- *	@name: device name
- *
- *	Attempt to put the device into MMIO mode. There are some slight
- *	complications here with certain systems where the MMIO BAR isn't
- *	mapped, so we have to be sure that we can fall back to I/O.
- */
-
-static unsigned int setup_mmio_siimage(struct pci_dev *dev, const char *name)
-{
-	resource_size_t bar5	= pci_resource_start(dev, 5);
-	unsigned long barsize	= pci_resource_len(dev, 5);
-	void __iomem *ioaddr;
-
-	/*
-	 *	Drop back to PIO if we can't map the MMIO. Some	systems
-	 *	seem to get terminally confused in the PCI spaces.
-	 */
-	if (!request_mem_region(bar5, barsize, name)) {
-		printk(KERN_WARNING "siimage: IDE controller MMIO ports not "
-				    "available.\n");
-		return 0;
-	}
-
-	ioaddr = ioremap(bar5, barsize);
-	if (ioaddr == NULL) {
-		release_mem_region(bar5, barsize);
-		return 0;
-	}
-
-	pci_set_master(dev);
-	pci_set_drvdata(dev, (void *) ioaddr);
-
-	return 1;
-}
-
-/**
  *	init_chipset_siimage	-	set up an SI device
  *	@dev: PCI device
- *	@name: device name
  *
  *	Perform the initial PCI set up for this device. Attempt to switch
  *	to 133 MHz clocking if the system isn't already set up to do it.
  */
 
-static unsigned int __devinit init_chipset_siimage(struct pci_dev *dev,
-						   const char *name)
+static unsigned int __devinit init_chipset_siimage(struct pci_dev *dev)
 {
+	struct ide_host *host = pci_get_drvdata(dev);
+	void __iomem *ioaddr = host->host_priv;
 	unsigned long base, scsc_addr;
-	void __iomem *ioaddr = NULL;
-	u8 rev = dev->revision, tmp, BA5_EN;
+	u8 rev = dev->revision, tmp;
 
 	pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, rev ? 1 : 255);
 
-	pci_read_config_byte(dev, 0x8A, &BA5_EN);
-
-	if ((BA5_EN & 0x01) || pci_resource_start(dev, 5))
-		if (setup_mmio_siimage(dev, name))
-			ioaddr = pci_get_drvdata(dev);
+	if (ioaddr)
+		pci_set_master(dev);
 
 	base = (unsigned long)ioaddr;
 
@@ -571,7 +539,8 @@ static unsigned int __devinit init_chipset_siimage(struct pci_dev *dev,
 			{ "== 100", "== 133", "== 2X PCI", "DISABLED!" };
 
 		tmp >>= 4;
-		printk(KERN_INFO "%s: BASE CLOCK %s\n", name, clk_str[tmp & 3]);
+		printk(KERN_INFO DRV_NAME " %s: BASE CLOCK %s\n",
+			pci_name(dev), clk_str[tmp & 3]);
 	}
 
 	return 0;
@@ -592,7 +561,8 @@ static unsigned int __devinit init_chipset_siimage(struct pci_dev *dev,
 static void __devinit init_mmio_iops_siimage(ide_hwif_t *hwif)
 {
 	struct pci_dev *dev	= to_pci_dev(hwif->dev);
-	void *addr		= pci_get_drvdata(dev);
+	struct ide_host *host	= pci_get_drvdata(dev);
+	void *addr		= host->host_priv;
 	u8 ch			= hwif->channel;
 	struct ide_io_ports *io_ports = &hwif->io_ports;
 	unsigned long base;
@@ -601,7 +571,7 @@ static void __devinit init_mmio_iops_siimage(ide_hwif_t *hwif)
 	 *	Fill in the basic hwif bits
 	 */
 	hwif->host_flags |= IDE_HFLAG_MMIO;
-	default_hwif_mmiops(hwif);
+
 	hwif->hwif_data	= addr;
 
 	/*
@@ -669,7 +639,7 @@ static int is_dev_seagate_sata(ide_drive_t *drive)
  *	that can occur before we know what drives are present.
  */
 
-static void __devinit sil_quirkproc(ide_drive_t *drive)
+static void sil_quirkproc(ide_drive_t *drive)
 {
 	ide_hwif_t *hwif = drive->hwif;
 
@@ -691,16 +661,15 @@ static void __devinit sil_quirkproc(ide_drive_t *drive)
 static void __devinit init_iops_siimage(ide_hwif_t *hwif)
 {
 	struct pci_dev *dev = to_pci_dev(hwif->dev);
+	struct ide_host *host = pci_get_drvdata(dev);
 
 	hwif->hwif_data = NULL;
 
 	/* Pessimal until we finish probing */
 	hwif->rqsize = 15;
 
-	if (pci_get_drvdata(dev) == NULL)
-		return;
-
-	init_mmio_iops_siimage(hwif);
+	if (host->host_priv)
+		init_mmio_iops_siimage(hwif);
 }
 
 /**
@@ -710,7 +679,7 @@ static void __devinit init_iops_siimage(ide_hwif_t *hwif)
  *	Check for the presence of an ATA66 capable cable on the interface.
  */
 
-static u8 __devinit sil_cable_detect(ide_hwif_t *hwif)
+static u8 sil_cable_detect(ide_hwif_t *hwif)
 {
 	struct pci_dev *dev	= to_pci_dev(hwif->dev);
 	unsigned long addr	= siimage_selreg(hwif, 0);
@@ -748,9 +717,9 @@ static const struct ide_dma_ops sil_dma_ops = {
 	.dma_lost_irq		= ide_dma_lost_irq,
 };
 
-#define DECLARE_SII_DEV(name_str, p_ops)		\
+#define DECLARE_SII_DEV(p_ops)				\
 	{						\
-		.name		= name_str,		\
+		.name		= DRV_NAME,		\
 		.init_chipset	= init_chipset_siimage,	\
 		.init_iops	= init_iops_siimage,	\
 		.port_ops	= p_ops,		\
@@ -761,9 +730,8 @@ static const struct ide_dma_ops sil_dma_ops = {
 	}
 
 static const struct ide_port_info siimage_chipsets[] __devinitdata = {
-	/* 0 */ DECLARE_SII_DEV("SiI680",		&sil_pata_port_ops),
-	/* 1 */ DECLARE_SII_DEV("SiI3112 Serial ATA",	&sil_sata_port_ops),
-	/* 2 */ DECLARE_SII_DEV("Adaptec AAR-1210SA",	&sil_sata_port_ops)
+	/* 0: SiI680 */  DECLARE_SII_DEV(&sil_pata_port_ops),
+	/* 1: SiI3112 */ DECLARE_SII_DEV(&sil_sata_port_ops)
 };
 
 /**
@@ -778,8 +746,13 @@ static const struct ide_port_info siimage_chipsets[] __devinitdata = {
 static int __devinit siimage_init_one(struct pci_dev *dev,
 				      const struct pci_device_id *id)
 {
+	void __iomem *ioaddr = NULL;
+	resource_size_t bar5 = pci_resource_start(dev, 5);
+	unsigned long barsize = pci_resource_len(dev, 5);
+	int rc;
 	struct ide_port_info d;
 	u8 idx = id->driver_data;
+	u8 BA5_EN;
 
 	d = siimage_chipsets[idx];
 
@@ -787,7 +760,7 @@ static int __devinit siimage_init_one(struct pci_dev *dev,
 		static int first = 1;
 
 		if (first) {
-			printk(KERN_INFO "siimage: For full SATA support you "
+			printk(KERN_INFO DRV_NAME ": For full SATA support you "
 				"should use the libata sata_sil module.\n");
 			first = 0;
 		}
@@ -795,14 +768,61 @@ static int __devinit siimage_init_one(struct pci_dev *dev,
 		d.host_flags |= IDE_HFLAG_NO_ATAPI_DMA;
 	}
 
-	return ide_setup_pci_device(dev, &d);
+	rc = pci_enable_device(dev);
+	if (rc)
+		return rc;
+
+	pci_read_config_byte(dev, 0x8A, &BA5_EN);
+	if ((BA5_EN & 0x01) || bar5) {
+		/*
+		* Drop back to PIO if we can't map the MMIO. Some systems
+		* seem to get terminally confused in the PCI spaces.
+		*/
+		if (!request_mem_region(bar5, barsize, d.name)) {
+			printk(KERN_WARNING DRV_NAME " %s: MMIO ports not "
+				"available\n", pci_name(dev));
+		} else {
+			ioaddr = ioremap(bar5, barsize);
+			if (ioaddr == NULL)
+				release_mem_region(bar5, barsize);
+		}
+	}
+
+	rc = ide_pci_init_one(dev, &d, ioaddr);
+	if (rc) {
+		if (ioaddr) {
+			iounmap(ioaddr);
+			release_mem_region(bar5, barsize);
+		}
+		pci_disable_device(dev);
+	}
+
+	return rc;
+}
+
+static void __devexit siimage_remove(struct pci_dev *dev)
+{
+	struct ide_host *host = pci_get_drvdata(dev);
+	void __iomem *ioaddr = host->host_priv;
+
+	ide_pci_remove(dev);
+
+	if (ioaddr) {
+		resource_size_t bar5 = pci_resource_start(dev, 5);
+		unsigned long barsize = pci_resource_len(dev, 5);
+
+		iounmap(ioaddr);
+		release_mem_region(bar5, barsize);
+	}
+
+	pci_disable_device(dev);
 }
 
 static const struct pci_device_id siimage_pci_tbl[] = {
 	{ PCI_VDEVICE(CMD, PCI_DEVICE_ID_SII_680),    0 },
 #ifdef CONFIG_BLK_DEV_IDE_SATA
 	{ PCI_VDEVICE(CMD, PCI_DEVICE_ID_SII_3112),   1 },
-	{ PCI_VDEVICE(CMD, PCI_DEVICE_ID_SII_1210SA), 2 },
+	{ PCI_VDEVICE(CMD, PCI_DEVICE_ID_SII_1210SA), 1 },
 #endif
 	{ 0, },
 };
@@ -812,6 +832,7 @@ static struct pci_driver driver = {
 	.name		= "SiI_IDE",
 	.id_table	= siimage_pci_tbl,
 	.probe		= siimage_init_one,
+	.remove		= __devexit_p(siimage_remove),
 };
 
 static int __init siimage_ide_init(void)
@@ -819,7 +840,13 @@ static int __init siimage_ide_init(void)
 	return ide_pci_register_driver(&driver);
 }
 
+static void __exit siimage_ide_exit(void)
+{
+	pci_unregister_driver(&driver);
+}
+
 module_init(siimage_ide_init);
+module_exit(siimage_ide_exit);
 
 MODULE_AUTHOR("Andre Hedrick, Alan Cox");
 MODULE_DESCRIPTION("PCI driver module for SiI IDE");