diff options
Diffstat (limited to 'drivers/ide/pci/siimage.c')
| -rw-r--r-- | drivers/ide/pci/siimage.c | 714 |
1 files changed, 314 insertions, 400 deletions
diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c index cc4be9621bc..4cf8fc54aa2 100644 --- a/drivers/ide/pci/siimage.c +++ b/drivers/ide/pci/siimage.c @@ -1,8 +1,8 @@ /* * Copyright (C) 2001-2002 Andre Hedrick <andre@linux-ide.org> * Copyright (C) 2003 Red Hat <alan@redhat.com> - * Copyright (C) 2007 MontaVista Software, Inc. - * Copyright (C) 2007 Bartlomiej Zolnierkiewicz + * Copyright (C) 2007-2008 MontaVista Software, Inc. + * Copyright (C) 2007-2008 Bartlomiej Zolnierkiewicz * * May be copied or modified under the terms of the GNU General Public License * @@ -17,10 +17,10 @@ * * FAQ Items: * If you are using Marvell SATA-IDE adapters with Maxtor drives - * ensure the system is set up for ATA100/UDMA5 not UDMA6. + * ensure the system is set up for ATA100/UDMA5, not UDMA6. * * If you are using WD drives with SATA bridges you must set the - * drive to "Single". "Master" will hang + * drive to "Single". "Master" will hang. * * If you have strange problems with nVidia chipset systems please * see the SI support documentation and update your system BIOS @@ -42,25 +42,24 @@ #include <linux/hdreg.h> #include <linux/ide.h> #include <linux/init.h> - -#include <asm/io.h> +#include <linux/io.h> /** * pdev_is_sata - check if device is SATA * @pdev: PCI device to check - * + * * Returns true if this is a SATA controller */ - + static int pdev_is_sata(struct pci_dev *pdev) { #ifdef CONFIG_BLK_DEV_IDE_SATA - switch(pdev->device) { - case PCI_DEVICE_ID_SII_3112: - case PCI_DEVICE_ID_SII_1210SA: - return 1; - case PCI_DEVICE_ID_SII_680: - return 0; + switch (pdev->device) { + case PCI_DEVICE_ID_SII_3112: + case PCI_DEVICE_ID_SII_1210SA: + return 1; + case PCI_DEVICE_ID_SII_680: + return 0; } BUG(); #endif @@ -70,10 +69,10 @@ static int pdev_is_sata(struct pci_dev *pdev) /** * is_sata - check if hwif is SATA * @hwif: interface to check - * + * * Returns true if this is a SATA controller */ - + static inline int is_sata(ide_hwif_t *hwif) { return pdev_is_sata(to_pci_dev(hwif->dev)); @@ -86,21 +85,22 @@ static inline int is_sata(ide_hwif_t *hwif) * * Turn a config register offset into the right address in either * PCI space or MMIO space to access the control register in question - * Thankfully this is a configuration operation so isnt performance - * criticial. + * Thankfully this is a configuration operation, so isn't performance + * critical. */ - + static unsigned long siimage_selreg(ide_hwif_t *hwif, int r) { unsigned long base = (unsigned long)hwif->hwif_data; + base += 0xA0 + r; - if(hwif->mmio) - base += (hwif->channel << 6); + if (hwif->mmio) + base += hwif->channel << 6; else - base += (hwif->channel << 4); + base += hwif->channel << 4; return base; } - + /** * siimage_seldev - return register base * @hwif: interface @@ -110,20 +110,69 @@ static unsigned long siimage_selreg(ide_hwif_t *hwif, int r) * PCI space or MMIO space to access the control register in question * including accounting for the unit shift. */ - + static inline unsigned long siimage_seldev(ide_drive_t *drive, int r) { ide_hwif_t *hwif = HWIF(drive); - unsigned long base = (unsigned long)hwif->hwif_data; + unsigned long base = (unsigned long)hwif->hwif_data; + base += 0xA0 + r; - if(hwif->mmio) - base += (hwif->channel << 6); + if (hwif->mmio) + base += hwif->channel << 6; else - base += (hwif->channel << 4); + base += hwif->channel << 4; base |= drive->select.b.unit << drive->select.b.unit; return base; } +static u8 sil_ioread8(struct pci_dev *dev, unsigned long addr) +{ + u8 tmp = 0; + + if (pci_get_drvdata(dev)) + tmp = readb((void __iomem *)addr); + else + pci_read_config_byte(dev, addr, &tmp); + + return tmp; +} + +static u16 sil_ioread16(struct pci_dev *dev, unsigned long addr) +{ + u16 tmp = 0; + + if (pci_get_drvdata(dev)) + tmp = readw((void __iomem *)addr); + else + pci_read_config_word(dev, addr, &tmp); + + return tmp; +} + +static void sil_iowrite8(struct pci_dev *dev, u8 val, unsigned long addr) +{ + if (pci_get_drvdata(dev)) + writeb(val, (void __iomem *)addr); + else + pci_write_config_byte(dev, addr, val); +} + +static void sil_iowrite16(struct pci_dev *dev, u16 val, unsigned long addr) +{ + if (pci_get_drvdata(dev)) + writew(val, (void __iomem *)addr); + else + pci_write_config_word(dev, addr, val); +} + +static void sil_iowrite32(struct pci_dev *dev, u32 val, unsigned long addr) +{ + if (pci_get_drvdata(dev)) + writel(val, (void __iomem *)addr); + else + pci_write_config_dword(dev, addr, val); +} + /** * sil_udma_filter - compute UDMA mask * @drive: IDE device @@ -136,24 +185,26 @@ static inline unsigned long siimage_seldev(ide_drive_t *drive, int r) static u8 sil_pata_udma_filter(ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; - struct pci_dev *dev = to_pci_dev(hwif->dev); - unsigned long base = (unsigned long) hwif->hwif_data; - u8 mask = 0, scsc = 0; + ide_hwif_t *hwif = drive->hwif; + struct pci_dev *dev = to_pci_dev(hwif->dev); + unsigned long base = (unsigned long)hwif->hwif_data; + u8 scsc, mask = 0; - if (hwif->mmio) - scsc = hwif->INB(base + 0x4A); - else - pci_read_config_byte(dev, 0x8A, &scsc); + scsc = sil_ioread8(dev, base + (hwif->mmio ? 0x4A : 0x8A)); - if ((scsc & 0x30) == 0x10) /* 133 */ + switch (scsc & 0x30) { + case 0x10: /* 133 */ mask = ATA_UDMA6; - else if ((scsc & 0x30) == 0x20) /* 2xPCI */ + break; + case 0x20: /* 2xPCI */ mask = ATA_UDMA6; - else if ((scsc & 0x30) == 0x00) /* 100 */ + break; + case 0x00: /* 100 */ mask = ATA_UDMA5; - else /* Disabled ? */ + break; + default: /* Disabled ? */ BUG(); + } return mask; } @@ -175,15 +226,16 @@ static u8 sil_sata_udma_filter(ide_drive_t *drive) static void sil_set_pio_mode(ide_drive_t *drive, u8 pio) { - const u16 tf_speed[] = { 0x328a, 0x2283, 0x1281, 0x10c3, 0x10c1 }; - const u16 data_speed[] = { 0x328a, 0x2283, 0x1104, 0x10c3, 0x10c1 }; + static const u16 tf_speed[] = { 0x328a, 0x2283, 0x1281, 0x10c3, 0x10c1 }; + static const u16 data_speed[] = { 0x328a, 0x2283, 0x1104, 0x10c3, 0x10c1 }; ide_hwif_t *hwif = HWIF(drive); + struct pci_dev *dev = to_pci_dev(hwif->dev); ide_drive_t *pair = ide_get_paired_drive(drive); u32 speedt = 0; u16 speedp = 0; unsigned long addr = siimage_seldev(drive, 0x04); - unsigned long tfaddr = siimage_selreg(hwif, 0x02); + unsigned long tfaddr = siimage_selreg(hwif, 0x02); unsigned long base = (unsigned long)hwif->hwif_data; u8 tf_pio = pio; u8 addr_mask = hwif->channel ? (hwif->mmio ? 0xF4 : 0x84) @@ -203,36 +255,20 @@ static void sil_set_pio_mode(ide_drive_t *drive, u8 pio) speedp = data_speed[pio]; speedt = tf_speed[tf_pio]; - if (hwif->mmio) { - hwif->OUTW(speedp, addr); - hwif->OUTW(speedt, tfaddr); - /* Now set up IORDY */ - if (pio > 2) - hwif->OUTW(hwif->INW(tfaddr-2)|0x200, tfaddr-2); - else - hwif->OUTW(hwif->INW(tfaddr-2)&~0x200, tfaddr-2); - - mode = hwif->INB(base + addr_mask); - mode &= ~(unit ? 0x30 : 0x03); - mode |= (unit ? 0x10 : 0x01); - hwif->OUTB(mode, base + addr_mask); - } else { - struct pci_dev *dev = to_pci_dev(hwif->dev); - - pci_write_config_word(dev, addr, speedp); - pci_write_config_word(dev, tfaddr, speedt); - pci_read_config_word(dev, tfaddr - 2, &speedp); - speedp &= ~0x200; - /* Set IORDY for mode 3 or 4 */ - if (pio > 2) - speedp |= 0x200; - pci_write_config_word(dev, tfaddr - 2, speedp); - - pci_read_config_byte(dev, addr_mask, &mode); - mode &= ~(unit ? 0x30 : 0x03); - mode |= (unit ? 0x10 : 0x01); - pci_write_config_byte(dev, addr_mask, mode); - } + sil_iowrite16(dev, speedp, addr); + sil_iowrite16(dev, speedt, tfaddr); + + /* now set up IORDY */ + speedp = sil_ioread16(dev, tfaddr - 2); + speedp &= ~0x200; + if (pio > 2) + speedp |= 0x200; + sil_iowrite16(dev, speedp, tfaddr - 2); + + mode = sil_ioread8(dev, base + addr_mask); + mode &= ~(unit ? 0x30 : 0x03); + mode |= unit ? 0x10 : 0x01; + sil_iowrite8(dev, mode, base + addr_mask); } /** @@ -245,63 +281,49 @@ static void sil_set_pio_mode(ide_drive_t *drive, u8 pio) static void sil_set_dma_mode(ide_drive_t *drive, const u8 speed) { - u8 ultra6[] = { 0x0F, 0x0B, 0x07, 0x05, 0x03, 0x02, 0x01 }; - u8 ultra5[] = { 0x0C, 0x07, 0x05, 0x04, 0x02, 0x01 }; - u16 dma[] = { 0x2208, 0x10C2, 0x10C1 }; + static const u8 ultra6[] = { 0x0F, 0x0B, 0x07, 0x05, 0x03, 0x02, 0x01 }; + static const u8 ultra5[] = { 0x0C, 0x07, 0x05, 0x04, 0x02, 0x01 }; + static const u16 dma[] = { 0x2208, 0x10C2, 0x10C1 }; ide_hwif_t *hwif = HWIF(drive); struct pci_dev *dev = to_pci_dev(hwif->dev); u16 ultra = 0, multi = 0; u8 mode = 0, unit = drive->select.b.unit; unsigned long base = (unsigned long)hwif->hwif_data; - u8 scsc = 0, addr_mask = ((hwif->channel) ? - ((hwif->mmio) ? 0xF4 : 0x84) : - ((hwif->mmio) ? 0xB4 : 0x80)); - + u8 scsc = 0, addr_mask = hwif->channel ? + (hwif->mmio ? 0xF4 : 0x84) : + (hwif->mmio ? 0xB4 : 0x80); unsigned long ma = siimage_seldev(drive, 0x08); unsigned long ua = siimage_seldev(drive, 0x0C); - if (hwif->mmio) { - scsc = hwif->INB(base + 0x4A); - mode = hwif->INB(base + addr_mask); - multi = hwif->INW(ma); - ultra = hwif->INW(ua); - } else { - pci_read_config_byte(dev, 0x8A, &scsc); - pci_read_config_byte(dev, addr_mask, &mode); - pci_read_config_word(dev, ma, &multi); - pci_read_config_word(dev, ua, &ultra); - } + scsc = sil_ioread8 (dev, base + (hwif->mmio ? 0x4A : 0x8A)); + mode = sil_ioread8 (dev, base + addr_mask); + multi = sil_ioread16(dev, ma); + ultra = sil_ioread16(dev, ua); - mode &= ~((unit) ? 0x30 : 0x03); + mode &= ~(unit ? 0x30 : 0x03); ultra &= ~0x3F; scsc = ((scsc & 0x30) == 0x00) ? 0 : 1; scsc = is_sata(hwif) ? 1 : scsc; if (speed >= XFER_UDMA_0) { - multi = dma[2]; - ultra |= (scsc ? ultra6[speed - XFER_UDMA_0] : - ultra5[speed - XFER_UDMA_0]); - mode |= (unit ? 0x30 : 0x03); + multi = dma[2]; + ultra |= scsc ? ultra6[speed - XFER_UDMA_0] : + ultra5[speed - XFER_UDMA_0]; + mode |= unit ? 0x30 : 0x03; } else { multi = dma[speed - XFER_MW_DMA_0]; - mode |= (unit ? 0x20 : 0x02); + mode |= unit ? 0x20 : 0x02; } - if (hwif->mmio) { - hwif->OUTB(mode, base + addr_mask); - hwif->OUTW(multi, ma); - hwif->OUTW(ultra, ua); - } else { - pci_write_config_byte(dev, addr_mask, mode); - pci_write_config_word(dev, ma, multi); - pci_write_config_word(dev, ua, ultra); - } + sil_iowrite8 (dev, mode, base + addr_mask); + sil_iowrite16(dev, multi, ma); + sil_iowrite16(dev, ultra, ua); } /* returns 1 if dma irq issued, 0 otherwise */ -static int siimage_io_ide_dma_test_irq (ide_drive_t *drive) +static int siimage_io_dma_test_irq(ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); struct pci_dev *dev = to_pci_dev(hwif->dev); @@ -309,25 +331,26 @@ static int siimage_io_ide_dma_test_irq (ide_drive_t *drive) unsigned long addr = siimage_selreg(hwif, 1); /* return 1 if INTR asserted */ - if ((hwif->INB(hwif->dma_status) & 4) == 4) + if (hwif->INB(hwif->dma_status) & 4) return 1; /* return 1 if Device INTR asserted */ pci_read_config_byte(dev, addr, &dma_altstat); if (dma_altstat & 8) - return 0; //return 1; + return 0; /* return 1; */ + return 0; } /** - * siimage_mmio_ide_dma_test_irq - check we caused an IRQ + * siimage_mmio_dma_test_irq - check we caused an IRQ * @drive: drive we are testing * * Check if we caused an IDE DMA interrupt. We may also have caused * SATA status interrupts, if so we clean them up and continue. */ - -static int siimage_mmio_ide_dma_test_irq (ide_drive_t *drive) + +static int siimage_mmio_dma_test_irq(ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); unsigned long addr = siimage_selreg(hwif, 0x1); @@ -335,9 +358,9 @@ static int siimage_mmio_ide_dma_test_irq (ide_drive_t *drive) = (void __iomem *)hwif->sata_scr[SATA_ERROR_OFFSET]; if (sata_error_addr) { - unsigned long base = (unsigned long)hwif->hwif_data; - u32 ext_stat = readl((void __iomem *)(base + 0x10)); - u8 watchdog = 0; + unsigned long base = (unsigned long)hwif->hwif_data; + u32 ext_stat = readl((void __iomem *)(base + 0x10)); + u8 watchdog = 0; if (ext_stat & ((hwif->channel) ? 0x40 : 0x10)) { u32 sata_error = readl(sata_error_addr); @@ -346,69 +369,32 @@ static int siimage_mmio_ide_dma_test_irq (ide_drive_t *drive) watchdog = (sata_error & 0x00680000) ? 1 : 0; printk(KERN_WARNING "%s: sata_error = 0x%08x, " "watchdog = %d, %s\n", - drive->name, sata_error, watchdog, - __FUNCTION__); - - } else { + drive->name, sata_error, watchdog, __func__); + } else watchdog = (ext_stat & 0x8000) ? 1 : 0; - } - ext_stat >>= 16; + ext_stat >>= 16; if (!(ext_stat & 0x0404) && !watchdog) return 0; } /* return 1 if INTR asserted */ - if ((readb((void __iomem *)hwif->dma_status) & 0x04) == 0x04) + if (readb((void __iomem *)hwif->dma_status) & 0x04) return 1; /* return 1 if Device INTR asserted */ - if ((readb((void __iomem *)addr) & 8) == 8) - return 0; //return 1; + if (readb((void __iomem *)addr) & 8) + return 0; /* return 1; */ return 0; } -/** - * sil_sata_busproc - bus isolation IOCTL - * @drive: drive to isolate/restore - * @state: bus state to set - * - * Used by the SII3112 to handle bus isolation. As this is a - * SATA controller the work required is quite limited, we - * just have to clean up the statistics - */ - -static int sil_sata_busproc(ide_drive_t * drive, int state) +static int siimage_dma_test_irq(ide_drive_t *drive) { - ide_hwif_t *hwif = HWIF(drive); - struct pci_dev *dev = to_pci_dev(hwif->dev); - u32 stat_config = 0; - unsigned long addr = siimage_selreg(hwif, 0); - - if (hwif->mmio) - stat_config = readl((void __iomem *)addr); + if (drive->hwif->mmio) + return siimage_mmio_dma_test_irq(drive); else - pci_read_config_dword(dev, addr, &stat_config); - - switch (state) { - case BUSSTATE_ON: - hwif->drives[0].failures = 0; - hwif->drives[1].failures = 0; - break; - case BUSSTATE_OFF: - hwif->drives[0].failures = hwif->drives[0].max_failures + 1; - hwif->drives[1].failures = hwif->drives[1].max_failures + 1; - break; - case BUSSTATE_TRISTATE: - hwif->drives[0].failures = hwif->drives[0].max_failures + 1; - hwif->drives[1].failures = hwif->drives[1].max_failures + 1; - break; - default: - return -EINVAL; - } - hwif->bus_state = state; - return 0; + return siimage_io_dma_test_irq(drive); } /** @@ -457,63 +443,33 @@ static void sil_sata_pre_reset(ide_drive_t *drive) } /** - * proc_reports_siimage - add siimage controller to proc - * @dev: PCI device - * @clocking: SCSC value - * @name: controller name - * - * Report the clocking mode of the controller and add it to - * the /proc interface layer - */ - -static void proc_reports_siimage (struct pci_dev *dev, u8 clocking, const char *name) -{ - if (!pdev_is_sata(dev)) { - printk(KERN_INFO "%s: BASE CLOCK ", name); - clocking &= 0x03; - switch (clocking) { - case 0x03: printk("DISABLED!\n"); break; - case 0x02: printk("== 2X PCI\n"); break; - case 0x01: printk("== 133\n"); break; - case 0x00: printk("== 100\n"); break; - } - } -} - -/** - * setup_mmio_siimage - switch an SI controller into MMIO + * setup_mmio_siimage - switch controller into MMIO mode * @dev: PCI device we are configuring * @name: device name * - * Attempt to put the device into mmio mode. There are some slight - * complications here with certain systems where the mmio bar isnt - * mapped so we have to be sure we can fall back to I/O. + * Attempt to put the device into MMIO mode. There are some slight + * complications here with certain systems where the MMIO BAR isn't + * mapped, so we have to be sure that we can fall back to I/O. */ - -static unsigned int setup_mmio_siimage (struct pci_dev *dev, const char *name) + +static unsigned int setup_mmio_siimage(struct pci_dev *dev, const char *name) { - unsigned long bar5 = pci_resource_start(dev, 5); + resource_size_t bar5 = pci_resource_start(dev, 5); unsigned long barsize = pci_resource_len(dev, 5); - u8 tmpbyte = 0; void __iomem *ioaddr; - u32 tmp, irq_mask; /* - * Drop back to PIO if we can't map the mmio. Some - * systems seem to get terminally confused in the PCI - * spaces. + * Drop back to PIO if we can't map the MMIO. Some systems + * seem to get terminally confused in the PCI spaces. */ - - if(!request_mem_region(bar5, barsize, name)) - { - printk(KERN_WARNING "siimage: IDE controller MMIO ports not available.\n"); + if (!request_mem_region(bar5, barsize, name)) { + printk(KERN_WARNING "siimage: IDE controller MMIO ports not " + "available.\n"); return 0; } - - ioaddr = ioremap(bar5, barsize); - if (ioaddr == NULL) - { + ioaddr = ioremap(bar5, barsize); + if (ioaddr == NULL) { release_mem_region(bar5, barsize); return 0; } @@ -521,62 +477,6 @@ static unsigned int setup_mmio_siimage (struct pci_dev *dev, const char *name) pci_set_master(dev); pci_set_drvdata(dev, (void *) ioaddr); - if (pdev_is_sata(dev)) { - /* make sure IDE0/1 interrupts are not masked */ - irq_mask = (1 << 22) | (1 << 23); - tmp = readl(ioaddr + 0x48); - if (tmp & irq_mask) { - tmp &= ~irq_mask; - writel(tmp, ioaddr + 0x48); - readl(ioaddr + 0x48); /* flush */ - } - writel(0, ioaddr + 0x148); - writel(0, ioaddr + 0x1C8); - } - - writeb(0, ioaddr + 0xB4); - writeb(0, ioaddr + 0xF4); - tmpbyte = readb(ioaddr + 0x4A); - - switch(tmpbyte & 0x30) { - case 0x00: - /* In 100 MHz clocking, try and switch to 133 */ - writeb(tmpbyte|0x10, ioaddr + 0x4A); - break; - case 0x10: - /* On 133Mhz clocking */ - break; - case 0x20: - /* On PCIx2 clocking */ - break; - case 0x30: - /* Clocking is disabled */ - /* 133 clock attempt to force it on */ - writeb(tmpbyte & ~0x20, ioaddr + 0x4A); - break; - } - - writeb( 0x72, ioaddr + 0xA1); - writew( 0x328A, ioaddr + 0xA2); - writel(0x62DD62DD, ioaddr + 0xA4); - writel(0x43924392, ioaddr + 0xA8); - writel(0x40094009, ioaddr + 0xAC); - writeb( 0x72, ioaddr + 0xE1); - writew( 0x328A, ioaddr + 0xE2); - writel(0x62DD62DD, ioaddr + 0xE4); - writel(0x43924392, ioaddr + 0xE8); - writel(0x40094009, ioaddr + 0xEC); - - if (pdev_is_sata(dev)) { - writel(0xFFFF0000, ioaddr + 0x108); - writel(0xFFFF0000, ioaddr + 0x188); - writel(0x00680000, ioaddr + 0x148); - writel(0x00680000, ioaddr + 0x1C8); - } - - tmpbyte = readb(ioaddr + 0x4A); - - proc_reports_siimage(dev, (tmpbyte>>4), name); return 1; } @@ -586,55 +486,92 @@ static unsigned int setup_mmio_siimage (struct pci_dev *dev, const char *name) * @name: device name * * Perform the initial PCI set up for this device. Attempt to switch - * to 133MHz clocking if the system isn't already set up to do it. + * to 133 MHz clocking if the system isn't already set up to do it. */ -static unsigned int __devinit init_chipset_siimage(struct pci_dev *dev, const char *name) +static unsigned int __devinit init_chipset_siimage(struct pci_dev *dev, + const char *name) { - u8 rev = dev->revision, tmpbyte = 0, BA5_EN = 0; + unsigned long base, scsc_addr; + void __iomem *ioaddr = NULL; + u8 rev = dev->revision, tmp, BA5_EN; pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, rev ? 1 : 255); pci_read_config_byte(dev, 0x8A, &BA5_EN); - if ((BA5_EN & 0x01) || (pci_resource_start(dev, 5))) { - if (setup_mmio_siimage(dev, name)) { - return 0; + + if ((BA5_EN & 0x01) || pci_resource_start(dev, 5)) + if (setup_mmio_siimage(dev, name)) + ioaddr = pci_get_drvdata(dev); + + base = (unsigned long)ioaddr; + + if (ioaddr && pdev_is_sata(dev)) { + u32 tmp32, irq_mask; + + /* make sure IDE0/1 interrupts are not masked */ + irq_mask = (1 << 22) | (1 << 23); + tmp32 = readl(ioaddr + 0x48); + if (tmp32 & irq_mask) { + tmp32 &= ~irq_mask; + writel(tmp32, ioaddr + 0x48); + readl(ioaddr + 0x48); /* flush */ } + writel(0, ioaddr + 0x148); + writel(0, ioaddr + 0x1C8); } - pci_write_config_byte(dev, 0x80, 0x00); - pci_write_config_byte(dev, 0x84, 0x00); - pci_read_config_byte(dev, 0x8A, &tmpbyte); - switch(tmpbyte & 0x30) { - case 0x00: - /* 133 clock attempt to force it on */ - pci_write_config_byte(dev, 0x8A, tmpbyte|0x10); - case 0x30: - /* if clocking is disabled */ - /* 133 clock attempt to force it on */ - pci_write_config_byte(dev, 0x8A, tmpbyte & ~0x20); - case 0x10: - /* 133 already */ - break; - case 0x20: - /* BIOS set PCI x2 clocking */ - break; + sil_iowrite8(dev, 0, base ? (base + 0xB4) : 0x80); + sil_iowrite8(dev, 0, base ? (base + 0xF4) : 0x84); + + scsc_addr = base ? (base + 0x4A) : 0x8A; + tmp = sil_ioread8(dev, scsc_addr); + + switch (tmp & 0x30) { + case 0x00: + /* On 100 MHz clocking, try and switch to 133 MHz */ + sil_iowrite8(dev, tmp | 0x10, scsc_addr); + break; + case 0x30: + /* Clocking is disabled, attempt to force 133MHz clocking. */ + sil_iowrite8(dev, tmp & ~0x20, scsc_addr); + case 0x10: + /* On 133Mhz clocking. */ + break; + case 0x20: + /* On PCIx2 clocking. */ + break; + } + + tmp = sil_ioread8(dev, scsc_addr); + + sil_iowrite8 (dev, 0x72, base + 0xA1); + sil_iowrite16(dev, 0x328A, base + 0xA2); + sil_iowrite32(dev, 0x62DD62DD, base + 0xA4); + sil_iowrite32(dev, 0x43924392, base + 0xA8); + sil_iowrite32(dev, 0x40094009, base + 0xAC); + sil_iowrite8 (dev, 0x72, base ? (base + 0xE1) : 0xB1); + sil_iowrite16(dev, 0x328A, base ? (base + 0xE2) : 0xB2); + sil_iowrite32(dev, 0x62DD62DD, base ? (base + 0xE4) : 0xB4); + sil_iowrite32(dev, 0x43924392, base ? (base + 0xE8) : 0xB8); + sil_iowrite32(dev, 0x40094009, base ? (base + 0xEC) : 0xBC); + + if (base && pdev_is_sata(dev)) { + writel(0xFFFF0000, ioaddr + 0x108); + writel(0xFFFF0000, ioaddr + 0x188); + writel(0x00680000, ioaddr + 0x148); + writel(0x00680000, ioaddr + 0x1C8); } - pci_read_config_byte(dev, 0x8A, &tmpbyte); + /* report the clocking mode of the controller */ + if (!pdev_is_sata(dev)) { + static const char *clk_str[] = + { "== 100", "== 133", "== 2X PCI", "DISABLED!" }; - pci_write_config_byte(dev, 0xA1, 0x72); - pci_write_config_word(dev, 0xA2, 0x328A); - pci_write_config_dword(dev, 0xA4, 0x62DD62DD); - pci_write_config_dword(dev, 0xA8, 0x43924392); - pci_write_config_dword(dev, 0xAC, 0x40094009); - pci_write_config_byte(dev, 0xB1, 0x72); - pci_write_config_word(dev, 0xB2, 0x328A); - pci_write_config_dword(dev, 0xB4, 0x62DD62DD); - pci_write_config_dword(dev, 0xB8, 0x43924392); - pci_write_config_dword(dev, 0xBC, 0x40094009); + tmp >>= 4; + printk(KERN_INFO "%s: BASE CLOCK %s\n", name, clk_str[tmp & 3]); + } - proc_reports_siimage(dev, (tmpbyte>>4), name); return 0; } @@ -644,8 +581,7 @@ static unsigned int __devinit init_chipset_siimage(struct pci_dev *dev, const ch * * The basic setup here is fairly simple, we can use standard MMIO * operations. However we do have to set the taskfile register offsets - * by hand as there isnt a standard defined layout for them this - * time. + * by hand as there isn't a standard defined layout for them this time. * * The hardware supports buffered taskfiles and also some rather nice * extended PRD tables. For better SI3112 support use the libata driver @@ -656,23 +592,21 @@ static void __devinit init_mmio_iops_siimage(ide_hwif_t *hwif) struct pci_dev *dev = to_pci_dev(hwif->dev); void *addr = pci_get_drvdata(dev); u8 ch = hwif->channel; - hw_regs_t hw; - unsigned long base; + struct ide_io_ports *io_ports = &hwif->io_ports; + unsigned long base; /* - * Fill in the basic HWIF bits + * Fill in the basic hwif bits */ - + hwif->host_flags |= IDE_HFLAG_MMIO; default_hwif_mmiops(hwif); - hwif->hwif_data = addr; + hwif->hwif_data = addr; /* - * Now set up the hw. We have to do this ourselves as - * the MMIO layout isnt the same as the standard port - * based I/O + * Now set up the hw. We have to do this ourselves as the + * MMIO layout isn't the same as the standard port based I/O. */ - - memset(&hw, 0, sizeof(hw_regs_t)); + memset(io_ports, 0, sizeof(*io_ports)); base = (unsigned long)addr; if (ch) @@ -681,21 +615,18 @@ static void __devinit init_mmio_iops_siimage(ide_hwif_t *hwif) base += 0x80; /* - * The buffered task file doesn't have status/control - * so we can't currently use it sanely since we want to - * use LBA48 mode. - */ - hw.io_ports[IDE_DATA_OFFSET] = base; - hw.io_ports[IDE_ERROR_OFFSET] = base + 1; - hw.io_ports[IDE_NSECTOR_OFFSET] = base + 2; - hw.io_ports[IDE_SECTOR_OFFSET] = base + 3; - hw.io_ports[IDE_LCYL_OFFSET] = base + 4; - hw.io_ports[IDE_HCYL_OFFSET] = base + 5; - hw.io_ports[IDE_SELECT_OFFSET] = base + 6; - hw.io_ports[IDE_STATUS_OFFSET] = base + 7; - hw.io_ports[IDE_CONTROL_OFFSET] = base + 10; - - hw.io_ports[IDE_IRQ_OFFSET] = 0; + * The buffered task file doesn't have status/control, so we + * can't currently use it sanely since we want to use LBA48 mode. + */ + io_ports->data_addr = base; + io_ports->error_addr = base + 1; + io_ports->nsect_addr = base + 2; + io_ports->lbal_addr = base + 3; + io_ports->lbam_addr = base + 4; + io_ports->lbah_addr = base + 5; + io_ports->device_addr = base + 6; + io_ports->status_addr = base + 7; + io_ports->ctl_addr = base + 10; if (pdev_is_sata(dev)) { base = (unsigned long)addr; @@ -706,8 +637,6 @@ static void __devinit init_mmio_iops_siimage(ide_hwif_t *hwif) hwif->sata_scr[SATA_CONTROL_OFFSET] = base + 0x100; } - memcpy(hwif->io_ports, hw.io_ports, sizeof(hwif->io_ports)); - hwif->irq = dev->irq; hwif->dma_base = (unsigned long)addr + (ch ? 0x08 : 0x00); @@ -717,19 +646,17 @@ static void __devinit init_mmio_iops_siimage(ide_hwif_t *hwif) static int is_dev_seagate_sata(ide_drive_t *drive) { - const char *s = &drive->id->model[0]; - unsigned len; + const char *s = &drive->id->model[0]; + unsigned len = strnlen(s, sizeof(drive->id->model)); - len = strnlen(s, sizeof(drive->id->model)); - - if ((len > 4) && (!memcmp(s, "ST", 2))) { + if ((len > 4) && (!memcmp(s, "ST", 2))) if ((!memcmp(s + len - 2, "AS", 2)) || (!memcmp(s + len - 3, "ASL", 3))) { printk(KERN_INFO "%s: applying pessimistic Seagate " "errata fix\n", drive->name); return 1; } - } + return 0; } @@ -746,7 +673,7 @@ static void __devinit sil_quirkproc(ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; - /* Try and raise the rqsize */ + /* Try and rise the rqsize */ if (!is_sata(hwif) || !is_dev_seagate_sata(drive)) hwif->rqsize = 128; } @@ -777,104 +704,91 @@ static void __devinit init_iops_siimage(ide_hwif_t *hwif) } /** - * ata66_siimage - check for 80 pin cable + * sil_cable_detect - cable detection * @hwif: interface to check * - * Check for the presence of an ATA66 capable cable on the - * interface. + * Check for the presence of an ATA66 capable cable on the interface. */ -static u8 __devinit ata66_siimage(ide_hwif_t *hwif) +static u8 __devinit sil_cable_detect(ide_hwif_t *hwif) { - struct pci_dev *dev = to_pci_dev(hwif->dev); - unsigned long addr = siimage_selreg(hwif, 0); - u8 ata66 = 0; - - if (pci_get_drvdata(dev) == NULL) - pci_read_config_byte(dev, addr, &ata66); - else - ata66 = hwif->INB(addr); + struct pci_dev *dev = to_pci_dev(hwif->dev); + unsigned long addr = siimage_selreg(hwif, 0); + u8 ata66 = sil_ioread8(dev, addr); return (ata66 & 0x01) ? ATA_CBL_PATA80 : ATA_CBL_PATA40; } -/** - * init_hwif_siimage - set up hwif structs - * @hwif: interface to set up - * - * We do the basic set up of the interface structure. The SIIMAGE - * requires several custom handlers so we override the default - * ide DMA handlers appropriately - */ - -static void __devinit init_hwif_siimage(ide_hwif_t *hwif) -{ - u8 sata = is_sata(hwif); - - hwif->set_pio_mode = &sil_set_pio_mode; - hwif->set_dma_mode = &sil_set_dma_mode; - hwif->quirkproc = &sil_quirkproc; - - if (sata) { - static int first = 1; - - hwif->busproc = &sil_sata_busproc; - hwif->reset_poll = &sil_sata_reset_poll; - hwif->pre_reset = &sil_sata_pre_reset; - hwif->udma_filter = &sil_sata_udma_filter; - - if (first) { - printk(KERN_INFO "siimage: For full SATA support you should use the libata sata_sil module.\n"); - first = 0; - } - } else - hwif->udma_filter = &sil_pata_udma_filter; - - hwif->cable_detect = ata66_siimage; - - if (hwif->dma_base == 0) - return; +static const struct ide_port_ops sil_pata_port_ops = { + .set_pio_mode = sil_set_pio_mode, + .set_dma_mode = sil_set_dma_mode, + .quirkproc = sil_quirkproc, + .udma_filter = sil_pata_udma_filter, + .cable_detect = sil_cable_detect, +}; - if (sata) - hwif->host_flags |= IDE_HFLAG_NO_ATAPI_DMA; +static const struct ide_port_ops sil_sata_port_ops = { + .set_pio_mode = sil_set_pio_mode, + .set_dma_mode = sil_set_dma_mode, + .reset_poll = sil_sata_reset_poll, + .pre_reset = sil_sata_pre_reset, + .quirkproc = sil_quirkproc, + .udma_filter = sil_sata_udma_filter, + .cable_detect = sil_cable_detect, +}; - if (hwif->mmio) { - hwif->ide_dma_test_irq = &siimage_mmio_ide_dma_test_irq; - } else { - hwif->ide_dma_test_irq = & siimage_io_ide_dma_test_irq; - } -} +static struct ide_dma_ops sil_dma_ops = { + .dma_test_irq = siimage_dma_test_irq, +}; -#define DECLARE_SII_DEV(name_str) \ +#define DECLARE_SII_DEV(name_str, p_ops) \ { \ .name = name_str, \ .init_chipset = init_chipset_siimage, \ .init_iops = init_iops_siimage, \ - .init_hwif = init_hwif_siimage, \ - .host_flags = IDE_HFLAG_BOOTABLE, \ + .port_ops = p_ops, \ + .dma_ops = &sil_dma_ops, \ .pio_mask = ATA_PIO4, \ .mwdma_mask = ATA_MWDMA2, \ .udma_mask = ATA_UDMA6, \ } static const struct ide_port_info siimage_chipsets[] __devinitdata = { - /* 0 */ DECLARE_SII_DEV("SiI680"), - /* 1 */ DECLARE_SII_DEV("SiI3112 Serial ATA"), - /* 2 */ DECLARE_SII_DEV("Adaptec AAR-1210SA") + /* 0 */ DECLARE_SII_DEV("SiI680", &sil_pata_port_ops), + /* 1 */ DECLARE_SII_DEV("SiI3112 Serial ATA", &sil_sata_port_ops), + /* 2 */ DECLARE_SII_DEV("Adaptec AAR-1210SA", &sil_sata_port_ops) }; /** - * siimage_init_one - pci layer discovery entry + * siimage_init_one - PCI layer discovery entry * @dev: PCI device * @id: ident table entry * - * Called by the PCI code when it finds an SI680 or SI3112 controller. + * Called by the PCI code when it finds an SiI680 or SiI3112 controller. * We then use the IDE PCI generic helper to do most of the work. */ - -static int __devinit siimage_init_one(struct pci_dev *dev, const struct pci_device_id *id) + +static int __devinit siimage_init_one(struct pci_dev *dev, + const struct pci_device_id *id) { - return ide_setup_pci_device(dev, &siimage_chipsets[id->driver_data]); + struct ide_port_info d; + u8 idx = id->driver_data; + + d = siimage_chipsets[idx]; + + if (idx) { + static int first = 1; + + if (first) { + printk(KERN_INFO "siimage: For full SATA support you " + "should use the libata sata_sil module.\n"); + first = 0; + } + + d.host_flags |= IDE_HFLAG_NO_ATAPI_DMA; + } + + return ide_setup_pci_device(dev, &d); } static const struct pci_device_id siimage_pci_tbl[] = { |