diff options
Diffstat (limited to 'drivers/ide/pci/siimage.c')
-rw-r--r-- | drivers/ide/pci/siimage.c | 139 |
1 files changed, 40 insertions, 99 deletions
diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c index 1c3e3548789..50f6d172ef7 100644 --- a/drivers/ide/pci/siimage.c +++ b/drivers/ide/pci/siimage.c @@ -1,9 +1,10 @@ /* - * linux/drivers/ide/pci/siimage.c Version 1.12 Mar 10 2007 + * linux/drivers/ide/pci/siimage.c Version 1.15 Jun 29 2007 * * Copyright (C) 2001-2002 Andre Hedrick <andre@linux-ide.org> * Copyright (C) 2003 Red Hat <alan@redhat.com> * Copyright (C) 2007 MontaVista Software, Inc. + * Copyright (C) 2007 Bartlomiej Zolnierkiewicz * * May be copied or modified under the terms of the GNU General Public License * @@ -31,6 +32,10 @@ * unplugging/replugging the virtual CD interface when the DRAC is reset. * This often causes drivers/ide/siimage to panic but is ok with the rather * smarter code in libata. + * + * TODO: + * - IORDY fixes + * - VDMA support */ #include <linux/types.h> @@ -160,82 +165,45 @@ out: } /** - * siimage_taskfile_timing - turn timing data to a mode - * @hwif: interface to query - * - * Read the timing data for the interface and return the - * mode that is being used. - */ - -static byte siimage_taskfile_timing (ide_hwif_t *hwif) -{ - u16 timing = 0x328a; - unsigned long addr = siimage_selreg(hwif, 2); - - if (hwif->mmio) - timing = hwif->INW(addr); - else - pci_read_config_word(hwif->pci_dev, addr, &timing); - - switch (timing) { - case 0x10c1: return 4; - case 0x10c3: return 3; - case 0x1104: - case 0x1281: return 2; - case 0x2283: return 1; - case 0x328a: - default: return 0; - } -} - -/** - * simmage_tuneproc - tune a drive + * sil_tune_pio - tune a drive * @drive: drive to tune - * @mode_wanted: the target operating mode + * @pio: the desired PIO mode * * Load the timing settings for this device mode into the * controller. If we are in PIO mode 3 or 4 turn on IORDY * monitoring (bit 9). The TF timing is bits 31:16 */ - -static void siimage_tuneproc (ide_drive_t *drive, byte mode_wanted) + +static void sil_tune_pio(ide_drive_t *drive, u8 pio) { + const u16 tf_speed[] = { 0x328a, 0x2283, 0x1281, 0x10c3, 0x10c1 }; + const u16 data_speed[] = { 0x328a, 0x2283, 0x1104, 0x10c3, 0x10c1 }; + ide_hwif_t *hwif = HWIF(drive); + ide_drive_t *pair = &hwif->drives[drive->dn ^ 1]; u32 speedt = 0; u16 speedp = 0; unsigned long addr = siimage_seldev(drive, 0x04); unsigned long tfaddr = siimage_selreg(hwif, 0x02); - - /* cheat for now and use the docs */ - switch (mode_wanted) { - case 4: - speedp = 0x10c1; - speedt = 0x10c1; - break; - case 3: - speedp = 0x10c3; - speedt = 0x10c3; - break; - case 2: - speedp = 0x1104; - speedt = 0x1281; - break; - case 1: - speedp = 0x2283; - speedt = 0x2283; - break; - case 0: - default: - speedp = 0x328a; - speedt = 0x328a; - break; + u8 tf_pio = pio; + + /* trim *taskfile* PIO to the slowest of the master/slave */ + if (pair->present) { + u8 pair_pio = ide_get_best_pio_mode(pair, 255, 4); + + if (pair_pio < tf_pio) + tf_pio = pair_pio; } + /* cheat for now and use the docs */ + speedp = data_speed[pio]; + speedt = tf_speed[tf_pio]; + if (hwif->mmio) { hwif->OUTW(speedp, addr); hwif->OUTW(speedt, tfaddr); /* Now set up IORDY */ - if(mode_wanted == 3 || mode_wanted == 4) + if (pio > 2) hwif->OUTW(hwif->INW(tfaddr-2)|0x200, tfaddr-2); else hwif->OUTW(hwif->INW(tfaddr-2)&~0x200, tfaddr-2); @@ -245,42 +213,17 @@ static void siimage_tuneproc (ide_drive_t *drive, byte mode_wanted) pci_read_config_word(hwif->pci_dev, tfaddr-2, &speedp); speedp &= ~0x200; /* Set IORDY for mode 3 or 4 */ - if(mode_wanted == 3 || mode_wanted == 4) + if (pio > 2) speedp |= 0x200; pci_write_config_word(hwif->pci_dev, tfaddr-2, speedp); } } -/** - * config_siimage_chipset_for_pio - set drive timings - * @drive: drive to tune - * @speed we want - * - * Compute the best pio mode we can for a given device. Also honour - * the timings for the driver when dealing with mixed devices. Some - * of this is ugly but its all wrapped up here - * - * The SI680 can also do VDMA - we need to start using that - * - * FIXME: we use the BIOS channel timings to avoid driving the task - * files too fast at the disk. We need to compute the master/slave - * drive PIO mode properly so that we can up the speed on a hotplug - * system. - */ - -static void config_siimage_chipset_for_pio (ide_drive_t *drive, byte set_speed) +static void sil_tuneproc(ide_drive_t *drive, u8 pio) { - u8 channel_timings = siimage_taskfile_timing(HWIF(drive)); - u8 speed = 0, set_pio = ide_get_best_pio_mode(drive, 4, 5, NULL); - - /* WARNING PIO timing mess is going to happen b/w devices, argh */ - if ((channel_timings != set_pio) && (set_pio > channel_timings)) - set_pio = channel_timings; - - siimage_tuneproc(drive, set_pio); - speed = XFER_PIO_0 + set_pio; - if (set_speed) - (void) ide_config_drive_speed(drive, speed); + pio = ide_get_best_pio_mode(drive, pio, 4); + sil_tune_pio(drive, pio); + (void)ide_config_drive_speed(drive, XFER_PIO_0 + pio); } /** @@ -335,7 +278,7 @@ static int siimage_tune_chipset (ide_drive_t *drive, byte xferspeed) case XFER_PIO_2: case XFER_PIO_1: case XFER_PIO_0: - siimage_tuneproc(drive, (speed - XFER_PIO_0)); + sil_tune_pio(drive, speed - XFER_PIO_0); mode |= ((unit) ? 0x10 : 0x01); break; case XFER_MW_DMA_2: @@ -343,7 +286,6 @@ static int siimage_tune_chipset (ide_drive_t *drive, byte xferspeed) case XFER_MW_DMA_0: multi = dma[speed - XFER_MW_DMA_0]; mode |= ((unit) ? 0x20 : 0x02); - config_siimage_chipset_for_pio(drive, 0); break; case XFER_UDMA_6: case XFER_UDMA_5: @@ -356,7 +298,6 @@ static int siimage_tune_chipset (ide_drive_t *drive, byte xferspeed) ultra |= ((scsc) ? (ultra6[speed - XFER_UDMA_0]) : (ultra5[speed - XFER_UDMA_0])); mode |= ((unit) ? 0x30 : 0x03); - config_siimage_chipset_for_pio(drive, 0); break; default: return 1; @@ -390,7 +331,7 @@ static int siimage_config_drive_for_dma (ide_drive_t *drive) return 0; if (ide_use_fast_pio(drive)) - config_siimage_chipset_for_pio(drive, 1); + sil_tuneproc(drive, 255); return -1; } @@ -961,7 +902,7 @@ static void __devinit init_hwif_siimage(ide_hwif_t *hwif) hwif->resetproc = &siimage_reset; hwif->speedproc = &siimage_tune_chipset; - hwif->tuneproc = &siimage_tuneproc; + hwif->tuneproc = &sil_tuneproc; hwif->reset_poll = &siimage_reset_poll; hwif->pre_reset = &siimage_pre_reset; hwif->udma_filter = &sil_udma_filter; @@ -976,11 +917,11 @@ static void __devinit init_hwif_siimage(ide_hwif_t *hwif) first = 0; } } - if (!hwif->dma_base) { - hwif->drives[0].autotune = 1; - hwif->drives[1].autotune = 1; + + hwif->drives[0].autotune = hwif->drives[1].autotune = 1; + + if (hwif->dma_base == 0) return; - } hwif->ultra_mask = 0x7f; hwif->mwdma_mask = 0x07; @@ -1016,9 +957,9 @@ static void __devinit init_hwif_siimage(ide_hwif_t *hwif) .init_iops = init_iops_siimage, \ .init_hwif = init_hwif_siimage, \ .fixup = siimage_fixup, \ - .channels = 2, \ .autodma = AUTODMA, \ .bootable = ON_BOARD, \ + .pio_mask = ATA_PIO4, \ } static ide_pci_device_t siimage_chipsets[] __devinitdata = { |