diff options
Diffstat (limited to 'drivers/ide/pci/siimage.c')
| -rw-r--r-- | drivers/ide/pci/siimage.c | 44 |
1 files changed, 26 insertions, 18 deletions
diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c index c9ecab8aeb6..3e4b9938070 100644 --- a/drivers/ide/pci/siimage.c +++ b/drivers/ide/pci/siimage.c @@ -735,14 +735,14 @@ static void __devinit init_iops_siimage(ide_hwif_t *hwif) } /** - * ata66_siimage - check for 80 pin cable + * sil_cable_detect - cable detection * @hwif: interface to check * * Check for the presence of an ATA66 capable cable on the * interface. */ -static u8 __devinit ata66_siimage(ide_hwif_t *hwif) +static u8 __devinit sil_cable_detect(ide_hwif_t *hwif) { struct pci_dev *dev = to_pci_dev(hwif->dev); unsigned long addr = siimage_selreg(hwif, 0); @@ -769,25 +769,14 @@ static void __devinit init_hwif_siimage(ide_hwif_t *hwif) { u8 sata = is_sata(hwif); - hwif->set_pio_mode = &sil_set_pio_mode; - hwif->set_dma_mode = &sil_set_dma_mode; - hwif->quirkproc = &sil_quirkproc; - if (sata) { static int first = 1; - hwif->reset_poll = &sil_sata_reset_poll; - hwif->pre_reset = &sil_sata_pre_reset; - hwif->udma_filter = &sil_sata_udma_filter; - if (first) { printk(KERN_INFO "siimage: For full SATA support you should use the libata sata_sil module.\n"); first = 0; } - } else - hwif->udma_filter = &sil_pata_udma_filter; - - hwif->cable_detect = ata66_siimage; + } if (hwif->dma_base == 0) return; @@ -802,21 +791,40 @@ static void __devinit init_hwif_siimage(ide_hwif_t *hwif) } } -#define DECLARE_SII_DEV(name_str) \ +static const struct ide_port_ops sil_pata_port_ops = { + .set_pio_mode = sil_set_pio_mode, + .set_dma_mode = sil_set_dma_mode, + .quirkproc = sil_quirkproc, + .udma_filter = sil_pata_udma_filter, + .cable_detect = sil_cable_detect, +}; + +static const struct ide_port_ops sil_sata_port_ops = { + .set_pio_mode = sil_set_pio_mode, + .set_dma_mode = sil_set_dma_mode, + .reset_poll = sil_sata_reset_poll, + .pre_reset = sil_sata_pre_reset, + .quirkproc = sil_quirkproc, + .udma_filter = sil_sata_udma_filter, + .cable_detect = sil_cable_detect, +}; + +#define DECLARE_SII_DEV(name_str, p_ops) \ { \ .name = name_str, \ .init_chipset = init_chipset_siimage, \ .init_iops = init_iops_siimage, \ .init_hwif = init_hwif_siimage, \ + .port_ops = p_ops, \ .pio_mask = ATA_PIO4, \ .mwdma_mask = ATA_MWDMA2, \ .udma_mask = ATA_UDMA6, \ } static const struct ide_port_info siimage_chipsets[] __devinitdata = { - /* 0 */ DECLARE_SII_DEV("SiI680"), - /* 1 */ DECLARE_SII_DEV("SiI3112 Serial ATA"), - /* 2 */ DECLARE_SII_DEV("Adaptec AAR-1210SA") + /* 0 */ DECLARE_SII_DEV("SiI680", &sil_pata_port_ops), + /* 1 */ DECLARE_SII_DEV("SiI3112 Serial ATA", &sil_sata_port_ops), + /* 2 */ DECLARE_SII_DEV("Adaptec AAR-1210SA", &sil_sata_port_ops) }; /** |