diff options
Diffstat (limited to 'drivers/ide/pci/siimage.c')
| -rw-r--r-- | drivers/ide/pci/siimage.c | 62 |
1 files changed, 12 insertions, 50 deletions
diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c index f1ca154dd52..72dade14c72 100644 --- a/drivers/ide/pci/siimage.c +++ b/drivers/ide/pci/siimage.c @@ -38,9 +38,6 @@ #include <asm/io.h> -#undef SIIMAGE_VIRTUAL_DMAPIO -#undef SIIMAGE_LARGE_DMA - /** * pdev_is_sata - check if device is SATA * @pdev: PCI device to check @@ -461,36 +458,6 @@ static int siimage_io_ide_dma_test_irq (ide_drive_t *drive) return 0; } -#if 0 -/** - * siimage_mmio_ide_dma_count - DMA bytes done - * @drive - * - * If we are doing VDMA the CMD680 requires a little bit - * of more careful handling and we have to read the counts - * off ourselves. For non VDMA life is normal. - */ - -static int siimage_mmio_ide_dma_count (ide_drive_t *drive) -{ -#ifdef SIIMAGE_VIRTUAL_DMAPIO - struct request *rq = HWGROUP(drive)->rq; - ide_hwif_t *hwif = HWIF(drive); - u32 count = (rq->nr_sectors * SECTOR_SIZE); - u32 rcount = 0; - unsigned long addr = siimage_selreg(hwif, 0x1C); - - hwif->OUTL(count, addr); - rcount = hwif->INL(addr); - - printk("\n%s: count = %d, rcount = %d, nr_sectors = %lu\n", - drive->name, count, rcount, rq->nr_sectors); - -#endif /* SIIMAGE_VIRTUAL_DMAPIO */ - return __ide_dma_count(drive); -} -#endif - /** * siimage_mmio_ide_dma_test_irq - check we caused an IRQ * @drive: drive we are testing @@ -512,12 +479,10 @@ static int siimage_mmio_ide_dma_test_irq (ide_drive_t *drive) u32 sata_error = hwif->INL(SATA_ERROR_REG); hwif->OUTL(sata_error, SATA_ERROR_REG); watchdog = (sata_error & 0x00680000) ? 1 : 0; -#if 1 printk(KERN_WARNING "%s: sata_error = 0x%08x, " "watchdog = %d, %s\n", drive->name, sata_error, watchdog, __FUNCTION__); -#endif } else { watchdog = (ext_stat & 0x8000) ? 1 : 0; @@ -863,7 +828,7 @@ static unsigned int __devinit init_chipset_siimage(struct pci_dev *dev, const ch * time. * * The hardware supports buffered taskfiles and also some rather nice - * extended PRD tables. Unfortunately right now we don't. + * extended PRD tables. For better SI3112 support use the libata driver */ static void __devinit init_mmio_iops_siimage(ide_hwif_t *hwif) @@ -900,9 +865,6 @@ static void __devinit init_mmio_iops_siimage(ide_hwif_t *hwif) * so we can't currently use it sanely since we want to * use LBA48 mode. */ -// base += 0x10; -// hwif->no_lba48 = 1; - hw.io_ports[IDE_DATA_OFFSET] = base; hw.io_ports[IDE_ERROR_OFFSET] = base + 1; hw.io_ports[IDE_NSECTOR_OFFSET] = base + 2; @@ -936,15 +898,8 @@ static void __devinit init_mmio_iops_siimage(ide_hwif_t *hwif) base = (unsigned long) addr; -#ifdef SIIMAGE_LARGE_DMA -/* Watch the brackets - even Ken and Dennis get some language design wrong */ - hwif->dma_base = base + (ch ? 0x18 : 0x10); - hwif->dma_base2 = base + (ch ? 0x08 : 0x00); - hwif->dma_prdtable = hwif->dma_base2 + 4; -#else /* ! SIIMAGE_LARGE_DMA */ hwif->dma_base = base + (ch ? 0x08 : 0x00); hwif->dma_base2 = base + (ch ? 0x18 : 0x10); -#endif /* SIIMAGE_LARGE_DMA */ hwif->mmio = 2; } @@ -1052,9 +1007,16 @@ static void __devinit init_hwif_siimage(ide_hwif_t *hwif) hwif->reset_poll = &siimage_reset_poll; hwif->pre_reset = &siimage_pre_reset; - if(is_sata(hwif)) + if(is_sata(hwif)) { + static int first = 1; + hwif->busproc = &siimage_busproc; + if (first) { + printk(KERN_INFO "siimage: For full SATA support you should use the libata sata_sil module.\n"); + first = 0; + } + } if (!hwif->dma_base) { hwif->drives[0].autotune = 1; hwif->drives[1].autotune = 1; @@ -1121,10 +1083,10 @@ static int __devinit siimage_init_one(struct pci_dev *dev, const struct pci_devi } static struct pci_device_id siimage_pci_tbl[] = { - { PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_SII_680, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + { PCI_DEVICE(PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_SII_680), 0}, #ifdef CONFIG_BLK_DEV_IDE_SATA - { PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_SII_3112, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1}, - { PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_SII_1210SA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2}, + { PCI_DEVICE(PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_SII_3112), 1}, + { PCI_DEVICE(PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_SII_1210SA), 2}, #endif { 0, }, }; |