summaryrefslogtreecommitdiffstats
path: root/drivers/ide/pci/sl82c105.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ide/pci/sl82c105.c')
-rw-r--r--drivers/ide/pci/sl82c105.c15
1 files changed, 8 insertions, 7 deletions
diff --git a/drivers/ide/pci/sl82c105.c b/drivers/ide/pci/sl82c105.c
index 73905bcc08f..84dc33602ff 100644
--- a/drivers/ide/pci/sl82c105.c
+++ b/drivers/ide/pci/sl82c105.c
@@ -17,7 +17,6 @@
#include <linux/types.h>
#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/hdreg.h>
#include <linux/pci.h>
#include <linux/ide.h>
@@ -62,7 +61,7 @@ static unsigned int get_pio_timings(ide_drive_t *drive, u8 pio)
if (cmd_off == 0)
cmd_off = 1;
- if (pio > 2 || ide_dev_has_iordy(drive->id))
+ if (pio > 2 || ata_id_has_iordy(drive->id))
iordy = 0x40;
return (cmd_on - 1) << 8 | (cmd_off - 1) | iordy;
@@ -208,7 +207,7 @@ static int sl82c105_dma_end(ide_drive_t *drive)
DBG(("%s(drive:%s)\n", __func__, drive->name));
- ret = __ide_dma_end(drive);
+ ret = ide_dma_end(drive);
pci_write_config_word(dev, reg, drive->drive_data);
@@ -272,7 +271,7 @@ static u8 sl82c105_bridge_revision(struct pci_dev *dev)
* channel 0 here at least, but channel 1 has to be enabled by
* firmware or arch code. We still set both to 16 bits mode.
*/
-static unsigned int __devinit init_chipset_sl82c105(struct pci_dev *dev)
+static unsigned int init_chipset_sl82c105(struct pci_dev *dev)
{
u32 val;
@@ -346,21 +345,23 @@ static const struct pci_device_id sl82c105_pci_tbl[] = {
};
MODULE_DEVICE_TABLE(pci, sl82c105_pci_tbl);
-static struct pci_driver driver = {
+static struct pci_driver sl82c105_pci_driver = {
.name = "W82C105_IDE",
.id_table = sl82c105_pci_tbl,
.probe = sl82c105_init_one,
.remove = ide_pci_remove,
+ .suspend = ide_pci_suspend,
+ .resume = ide_pci_resume,
};
static int __init sl82c105_ide_init(void)
{
- return ide_pci_register_driver(&driver);
+ return ide_pci_register_driver(&sl82c105_pci_driver);
}
static void __exit sl82c105_ide_exit(void)
{
- pci_unregister_driver(&driver);
+ pci_unregister_driver(&sl82c105_pci_driver);
}
module_init(sl82c105_ide_init);