diff options
Diffstat (limited to 'drivers/ide/pci/sl82c105.c')
| -rw-r--r-- | drivers/ide/pci/sl82c105.c | 21 |
1 files changed, 15 insertions, 6 deletions
diff --git a/drivers/ide/pci/sl82c105.c b/drivers/ide/pci/sl82c105.c index 6efbde29717..73905bcc08f 100644 --- a/drivers/ide/pci/sl82c105.c +++ b/drivers/ide/pci/sl82c105.c @@ -23,6 +23,8 @@ #include <asm/io.h> +#define DRV_NAME "sl82c105" + #undef DEBUG #ifdef DEBUG @@ -157,9 +159,9 @@ static void sl82c105_dma_lost_irq(ide_drive_t *drive) * Was DMA enabled? If so, disable it - we're resetting the * host. The IDE layer will be handling the drive for us. */ - dma_cmd = inb(hwif->dma_command); + dma_cmd = inb(hwif->dma_base + ATA_DMA_CMD); if (dma_cmd & 1) { - outb(dma_cmd & ~1, hwif->dma_command); + outb(dma_cmd & ~1, hwif->dma_base + ATA_DMA_CMD); printk("sl82c105: DMA was enabled\n"); } @@ -270,7 +272,7 @@ static u8 sl82c105_bridge_revision(struct pci_dev *dev) * channel 0 here at least, but channel 1 has to be enabled by * firmware or arch code. We still set both to 16 bits mode. */ -static unsigned int __devinit init_chipset_sl82c105(struct pci_dev *dev, const char *msg) +static unsigned int __devinit init_chipset_sl82c105(struct pci_dev *dev) { u32 val; @@ -301,7 +303,7 @@ static const struct ide_dma_ops sl82c105_dma_ops = { }; static const struct ide_port_info sl82c105_chipset __devinitdata = { - .name = "W82C105", + .name = DRV_NAME, .init_chipset = init_chipset_sl82c105, .enablebits = {{0x40,0x01,0x01}, {0x40,0x10,0x10}}, .port_ops = &sl82c105_port_ops, @@ -328,14 +330,14 @@ static int __devinit sl82c105_init_one(struct pci_dev *dev, const struct pci_dev * Never ever EVER under any circumstances enable * DMA when the bridge is this old. */ - printk(KERN_INFO "W82C105_IDE: Winbond W83C553 bridge " + printk(KERN_INFO DRV_NAME ": Winbond W83C553 bridge " "revision %d, BM-DMA disabled\n", rev); d.dma_ops = NULL; d.mwdma_mask = 0; d.host_flags &= ~IDE_HFLAG_SERIALIZE_DMA; } - return ide_setup_pci_device(dev, &d); + return ide_pci_init_one(dev, &d, NULL); } static const struct pci_device_id sl82c105_pci_tbl[] = { @@ -348,6 +350,7 @@ static struct pci_driver driver = { .name = "W82C105_IDE", .id_table = sl82c105_pci_tbl, .probe = sl82c105_init_one, + .remove = ide_pci_remove, }; static int __init sl82c105_ide_init(void) @@ -355,7 +358,13 @@ static int __init sl82c105_ide_init(void) return ide_pci_register_driver(&driver); } +static void __exit sl82c105_ide_exit(void) +{ + pci_unregister_driver(&driver); +} + module_init(sl82c105_ide_init); +module_exit(sl82c105_ide_exit); MODULE_DESCRIPTION("PCI driver module for W82C105 IDE"); MODULE_LICENSE("GPL"); |