diff options
Diffstat (limited to 'drivers/ide/pci')
30 files changed, 410 insertions, 600 deletions
diff --git a/drivers/ide/pci/aec62xx.c b/drivers/ide/pci/aec62xx.c index 74432830abf..0d5f62c5dfa 100644 --- a/drivers/ide/pci/aec62xx.c +++ b/drivers/ide/pci/aec62xx.c @@ -87,12 +87,11 @@ static u8 pci_bus_clock_list_ultra (u8 speed, struct chipset_bus_clock_list_entr return chipset_table->ultra_settings; } -static int aec6210_tune_chipset (ide_drive_t *drive, u8 xferspeed) +static int aec6210_tune_chipset(ide_drive_t *drive, const u8 speed) { ide_hwif_t *hwif = HWIF(drive); struct pci_dev *dev = hwif->pci_dev; u16 d_conf = 0; - u8 speed = ide_rate_filter(drive, xferspeed); u8 ultra = 0, ultra_conf = 0; u8 tmp0 = 0, tmp1 = 0, tmp2 = 0; unsigned long flags; @@ -115,11 +114,10 @@ static int aec6210_tune_chipset (ide_drive_t *drive, u8 xferspeed) return(ide_config_drive_speed(drive, speed)); } -static int aec6260_tune_chipset (ide_drive_t *drive, u8 xferspeed) +static int aec6260_tune_chipset(ide_drive_t *drive, const u8 speed) { ide_hwif_t *hwif = HWIF(drive); struct pci_dev *dev = hwif->pci_dev; - u8 speed = ide_rate_filter(drive, xferspeed); u8 unit = (drive->select.b.unit & 0x01); u8 tmp1 = 0, tmp2 = 0; u8 ultra = 0, drive_conf = 0, ultra_conf = 0; @@ -140,9 +138,8 @@ static int aec6260_tune_chipset (ide_drive_t *drive, u8 xferspeed) return(ide_config_drive_speed(drive, speed)); } -static void aec62xx_tune_drive (ide_drive_t *drive, u8 pio) +static void aec_set_pio_mode(ide_drive_t *drive, const u8 pio) { - pio = ide_get_best_pio_mode(drive, pio, 4); (void) HWIF(drive)->speedproc(drive, pio + XFER_PIO_0); } @@ -152,7 +149,7 @@ static int aec62xx_config_drive_xfer_rate (ide_drive_t *drive) return 0; if (ide_use_fast_pio(drive)) - aec62xx_tune_drive(drive, 255); + ide_set_max_pio(drive); return -1; } @@ -203,7 +200,7 @@ static void __devinit init_hwif_aec62xx(ide_hwif_t *hwif) u8 reg54 = 0, mask = hwif->channel ? 0xf0 : 0x0f; unsigned long flags; - hwif->tuneproc = &aec62xx_tune_drive; + hwif->set_pio_mode = &aec_set_pio_mode; if (dev->device == PCI_DEVICE_ID_ARTOP_ATP850UF) { if(hwif->mate) diff --git a/drivers/ide/pci/alim15x3.c b/drivers/ide/pci/alim15x3.c index 11ecb618007..d04b966b434 100644 --- a/drivers/ide/pci/alim15x3.c +++ b/drivers/ide/pci/alim15x3.c @@ -1,5 +1,5 @@ /* - * linux/drivers/ide/pci/alim15x3.c Version 0.25 Jun 9 2007 + * linux/drivers/ide/pci/alim15x3.c Version 0.26 Jul 14 2007 * * Copyright (C) 1998-2000 Michel Aubry, Maintainer * Copyright (C) 1998-2000 Andrzej Krzysztofowicz, Maintainer @@ -283,17 +283,14 @@ static int ali_get_info (char *buffer, char **addr, off_t offset, int count) #endif /* defined(DISPLAY_ALI_TIMINGS) && defined(CONFIG_IDE_PROC_FS) */ /** - * ali15x3_tune_pio - set up chipset for PIO mode - * @drive: drive to tune - * @pio: desired mode - * - * Select the best PIO mode for the drive in question. - * Then program the controller for this mode. + * ali_tune_pio - set host controller for PIO mode + * @drive: drive + * @pio: PIO mode number * - * Returns the PIO mode programmed. + * Program the controller for the given PIO mode. */ - -static u8 ali15x3_tune_pio (ide_drive_t *drive, u8 pio) + +static void ali_tune_pio(ide_drive_t *drive, const u8 pio) { ide_hwif_t *hwif = HWIF(drive); struct pci_dev *dev = hwif->pci_dev; @@ -306,7 +303,6 @@ static u8 ali15x3_tune_pio (ide_drive_t *drive, u8 pio) u8 cd_dma_fifo = 0; int unit = drive->select.b.unit & 1; - pio = ide_get_best_pio_mode(drive, pio, 5); s_time = ide_pio_timings[pio].setup_time; a_time = ide_pio_timings[pio].active_time; if ((s_clc = (s_time * bus_speed + 999) / 1000) >= 8) @@ -359,22 +355,20 @@ static u8 ali15x3_tune_pio (ide_drive_t *drive, u8 pio) * { 25, 70, 25 }, PIO Mode 4 with IORDY ns * { 20, 50, 30 } PIO Mode 5 with IORDY (nonstandard) */ - - return pio; } /** - * ali15x3_tune_drive - set up drive for PIO mode + * ali_set_pio_mode - set up drive for PIO mode * @drive: drive to tune * @pio: desired mode * - * Program the controller with the best PIO timing for the given drive. + * Program the controller with the desired PIO timing for the given drive. * Then set up the drive itself. */ -static void ali15x3_tune_drive (ide_drive_t *drive, u8 pio) +static void ali_set_pio_mode(ide_drive_t *drive, const u8 pio) { - pio = ali15x3_tune_pio(drive, pio); + ali_tune_pio(drive, pio); (void) ide_config_drive_speed(drive, XFER_PIO_0 + pio); } @@ -409,22 +403,24 @@ static u8 ali_udma_filter(ide_drive_t *drive) /** * ali15x3_tune_chipset - set up chipset/drive for new speed * @drive: drive to configure for - * @xferspeed: desired speed + * @speed: desired speed * * Configure the hardware for the desired IDE transfer mode. * We also do the needed drive configuration through helpers */ - -static int ali15x3_tune_chipset (ide_drive_t *drive, u8 xferspeed) + +static int ali15x3_tune_chipset(ide_drive_t *drive, const u8 speed) { ide_hwif_t *hwif = HWIF(drive); struct pci_dev *dev = hwif->pci_dev; - u8 speed = ide_rate_filter(drive, xferspeed); u8 speed1 = speed; u8 unit = (drive->select.b.unit & 0x01); u8 tmpbyte = 0x00; int m5229_udma = (hwif->channel) ? 0x57 : 0x56; + if (speed < XFER_PIO_0) + return 1; + if (speed == XFER_UDMA_6) speed1 = 0x47; @@ -437,8 +433,9 @@ static int ali15x3_tune_chipset (ide_drive_t *drive, u8 xferspeed) tmpbyte &= ultra_enable; pci_write_config_byte(dev, m5229_udma, tmpbyte); - if (speed < XFER_SW_DMA_0) - (void) ali15x3_tune_pio(drive, speed - XFER_PIO_0); + /* + * FIXME: Oh, my... DMA timings are never set. + */ } else { pci_read_config_byte(dev, m5229_udma, &tmpbyte); tmpbyte &= (0x0f << ((1-unit) << 2)); @@ -471,7 +468,7 @@ static int ali15x3_config_drive_for_dma(ide_drive_t *drive) if (ide_tune_dma(drive)) return 0; - ali15x3_tune_drive(drive, 255); + ide_set_max_pio(drive); return -1; } @@ -588,7 +585,7 @@ out: * Cable special cases */ -static struct dmi_system_id cable_dmi_table[] = { +static const struct dmi_system_id cable_dmi_table[] = { { .ident = "HP Pavilion N5430", .matches = { @@ -701,7 +698,7 @@ static u8 __devinit ata66_ali15x3(ide_hwif_t *hwif) static void __devinit init_hwif_common_ali15x3 (ide_hwif_t *hwif) { hwif->autodma = 0; - hwif->tuneproc = &ali15x3_tune_drive; + hwif->set_pio_mode = &ali_set_pio_mode; hwif->speedproc = &ali15x3_tune_chipset; hwif->udma_filter = &ali_udma_filter; diff --git a/drivers/ide/pci/amd74xx.c b/drivers/ide/pci/amd74xx.c index 06c15a6a3e7..513205e52ad 100644 --- a/drivers/ide/pci/amd74xx.c +++ b/drivers/ide/pci/amd74xx.c @@ -1,5 +1,5 @@ /* - * Version 2.21 + * Version 2.22 * * AMD 755/756/766/8111 and nVidia nForce/2/2s/3/3s/CK804/MCP04 * IDE driver for Linux. @@ -234,7 +234,7 @@ static void amd_set_speed(struct pci_dev *dev, unsigned char dn, struct ide_timi * by upper layers. */ -static int amd_set_drive(ide_drive_t *drive, u8 speed) +static int amd_set_drive(ide_drive_t *drive, const u8 speed) { ide_drive_t *peer = HWIF(drive)->drives + (~drive->dn & 1); struct ide_timing t, p; @@ -266,32 +266,21 @@ static int amd_set_drive(ide_drive_t *drive, u8 speed) } /* - * amd74xx_tune_drive() is a callback from upper layers for - * PIO-only tuning. + * amd_set_pio_mode() is a callback from upper layers for PIO-only tuning. */ -static void amd74xx_tune_drive(ide_drive_t *drive, u8 pio) +static void amd_set_pio_mode(ide_drive_t *drive, const u8 pio) { - if (pio == 255) - pio = ide_get_best_pio_mode(drive, 255, 5); - - amd_set_drive(drive, XFER_PIO_0 + min_t(byte, pio, 5)); + amd_set_drive(drive, XFER_PIO_0 + pio); } static int amd74xx_ide_dma_check(ide_drive_t *drive) { - u8 speed = ide_max_dma_mode(drive); - - if (speed == 0) { - amd74xx_tune_drive(drive, 255); - return -1; - } - - amd_set_drive(drive, speed); - - if (drive->autodma) + if (ide_tune_dma(drive)) return 0; + ide_set_max_pio(drive); + return -1; } @@ -409,7 +398,7 @@ static void __devinit init_hwif_amd74xx(ide_hwif_t *hwif) hwif->autodma = 0; - hwif->tuneproc = &amd74xx_tune_drive; + hwif->set_pio_mode = &amd_set_pio_mode; hwif->speedproc = &amd_set_drive; for (i = 0; i < 2; i++) { diff --git a/drivers/ide/pci/atiixp.c b/drivers/ide/pci/atiixp.c index 1725aa402d9..178876a3afc 100644 --- a/drivers/ide/pci/atiixp.c +++ b/drivers/ide/pci/atiixp.c @@ -153,9 +153,8 @@ static void atiixp_tune_pio(ide_drive_t *drive, u8 pio) spin_unlock_irqrestore(&atiixp_lock, flags); } -static void atiixp_tuneproc(ide_drive_t *drive, u8 pio) +static void atiixp_set_pio_mode(ide_drive_t *drive, const u8 pio) { - pio = ide_get_best_pio_mode(drive, pio, 4); atiixp_tune_pio(drive, pio); (void)ide_config_drive_speed(drive, XFER_PIO_0 + pio); } @@ -163,28 +162,21 @@ static void atiixp_tuneproc(ide_drive_t *drive, u8 pio) /** * atiixp_tune_chipset - tune a ATIIXP interface * @drive: IDE drive to tune - * @xferspeed: speed to configure + * @speed: speed to configure * * Set a ATIIXP interface channel to the desired speeds. This involves * requires the right timing data into the ATIIXP configuration space * then setting the drive parameters appropriately */ -static int atiixp_speedproc(ide_drive_t *drive, u8 xferspeed) +static int atiixp_speedproc(ide_drive_t *drive, const u8 speed) { struct pci_dev *dev = drive->hwif->pci_dev; unsigned long flags; int timing_shift = (drive->dn & 2) ? 16 : 0 + (drive->dn & 1) ? 0 : 8; u32 tmp32; u16 tmp16; - u8 speed, pio; - - speed = ide_rate_filter(drive, xferspeed); - - if (speed >= XFER_PIO_0 && speed <= XFER_PIO_4) { - atiixp_tune_pio(drive, speed - XFER_PIO_0); - return ide_config_drive_speed(drive, speed); - } + u8 pio; spin_lock_irqsave(&atiixp_lock, flags); @@ -233,7 +225,7 @@ static int atiixp_dma_check(ide_drive_t *drive) return 0; if (ide_use_fast_pio(drive)) - atiixp_tuneproc(drive, 255); + ide_set_max_pio(drive); return -1; } @@ -256,7 +248,7 @@ static void __devinit init_hwif_atiixp(ide_hwif_t *hwif) hwif->irq = ch ? 15 : 14; hwif->autodma = 0; - hwif->tuneproc = &atiixp_tuneproc; + hwif->set_pio_mode = &atiixp_set_pio_mode; hwif->speedproc = &atiixp_speedproc; hwif->drives[0].autotune = 1; hwif->drives[1].autotune = 1; @@ -325,7 +317,7 @@ static struct pci_device_id atiixp_pci_tbl[] = { { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP300_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1}, - { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP700_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1}, + { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP700_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, { 0, }, }; MODULE_DEVICE_TABLE(pci, atiixp_pci_tbl); diff --git a/drivers/ide/pci/cmd640.c b/drivers/ide/pci/cmd640.c index 9689494efa2..f369645e4d1 100644 --- a/drivers/ide/pci/cmd640.c +++ b/drivers/ide/pci/cmd640.c @@ -628,45 +628,40 @@ static void cmd640_set_mode (unsigned int index, u8 pio_mode, unsigned int cycle program_drive_counts (index); } -/* - * Drive PIO mode selection: - */ -static void cmd640_tune_drive (ide_drive_t *drive, u8 mode_wanted) +static void cmd640_set_pio_mode(ide_drive_t *drive, const u8 pio) { unsigned int index = 0, cycle_time; u8 b; while (drive != cmd_drives[index]) { if (++index > 3) { - printk("%s: bad news in cmd640_tune_drive\n", drive->name); + printk(KERN_ERR "%s: bad news in %s\n", + drive->name, __FUNCTION__); return; } } - switch (mode_wanted) { + switch (pio) { case 6: /* set fast-devsel off */ case 7: /* set fast-devsel on */ - mode_wanted &= 1; b = get_cmd640_reg(CNTRL) & ~0x27; - if (mode_wanted) + if (pio & 1) b |= 0x27; put_cmd640_reg(CNTRL, b); - printk("%s: %sabled cmd640 fast host timing (devsel)\n", drive->name, mode_wanted ? "en" : "dis"); + printk("%s: %sabled cmd640 fast host timing (devsel)\n", drive->name, (pio & 1) ? "en" : "dis"); return; case 8: /* set prefetch off */ case 9: /* set prefetch on */ - mode_wanted &= 1; - set_prefetch_mode(index, mode_wanted); - printk("%s: %sabled cmd640 prefetch\n", drive->name, mode_wanted ? "en" : "dis"); + set_prefetch_mode(index, pio & 1); + printk("%s: %sabled cmd640 prefetch\n", drive->name, (pio & 1) ? "en" : "dis"); return; } - mode_wanted = ide_get_best_pio_mode(drive, mode_wanted, 5); - cycle_time = ide_pio_cycle_time(drive, mode_wanted); - cmd640_set_mode(index, mode_wanted, cycle_time); + cycle_time = ide_pio_cycle_time(drive, pio); + cmd640_set_mode(index, pio, cycle_time); printk("%s: selected cmd640 PIO mode%d (%dns)", - drive->name, mode_wanted, cycle_time); + drive->name, pio, cycle_time); display_clocks(index); } @@ -766,8 +761,10 @@ int __init ide_probe_for_cmd640x (void) cmd_hwif0->name, 'a' + cmd640_chip_version - 1, bus_type, cfr); cmd_hwif0->chipset = ide_cmd640; #ifdef CONFIG_BLK_DEV_CMD640_ENHANCED + cmd_hwif0->host_flags = IDE_HFLAG_ABUSE_PREFETCH | + IDE_HFLAG_ABUSE_FAST_DEVSEL; cmd_hwif0->pio_mask = ATA_PIO5; - cmd_hwif0->tuneproc = &cmd640_tune_drive; + cmd_hwif0->set_pio_mode = &cmd640_set_pio_mode; #endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */ /* @@ -822,8 +819,10 @@ int __init ide_probe_for_cmd640x (void) cmd_hwif1->mate = cmd_hwif0; cmd_hwif1->channel = 1; #ifdef CONFIG_BLK_DEV_CMD640_ENHANCED + cmd_hwif1->host_flags = IDE_HFLAG_ABUSE_PREFETCH | + IDE_HFLAG_ABUSE_FAST_DEVSEL; cmd_hwif1->pio_mask = ATA_PIO5; - cmd_hwif1->tuneproc = &cmd640_tune_drive; + cmd_hwif1->set_pio_mode = &cmd640_set_pio_mode; #endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */ } printk(KERN_INFO "%s: %sserialized, secondary interface %s\n", cmd_hwif1->name, diff --git a/drivers/ide/pci/cmd64x.c b/drivers/ide/pci/cmd64x.c index 0e3b5de26e6..0b568c60f92 100644 --- a/drivers/ide/pci/cmd64x.c +++ b/drivers/ide/pci/cmd64x.c @@ -214,28 +214,25 @@ static void program_cycle_times (ide_drive_t *drive, int cycle_time, int active_ } /* - * This routine selects drive's best PIO mode and writes into the chipset - * registers setup/active/recovery timings. + * This routine writes into the chipset registers + * PIO setup/active/recovery timings. */ -static u8 cmd64x_tune_pio (ide_drive_t *drive, u8 mode_wanted) +static void cmd64x_tune_pio(ide_drive_t *drive, const u8 pio) { ide_hwif_t *hwif = HWIF(drive); struct pci_dev *dev = hwif->pci_dev; unsigned int cycle_time; - u8 pio_mode, setup_count, arttim = 0; + u8 setup_count, arttim = 0; + static const u8 setup_values[] = {0x40, 0x40, 0x40, 0x80, 0, 0xc0}; static const u8 arttim_regs[4] = {ARTTIM0, ARTTIM1, ARTTIM23, ARTTIM23}; - pio_mode = ide_get_best_pio_mode(drive, mode_wanted, 5); - cycle_time = ide_pio_cycle_time(drive, pio_mode); - - cmdprintk("%s: PIO mode wanted %d, selected %d (%d ns)\n", - drive->name, mode_wanted, pio_mode, cycle_time); + cycle_time = ide_pio_cycle_time(drive, pio); program_cycle_times(drive, cycle_time, - ide_pio_timings[pio_mode].active_time); + ide_pio_timings[pio].active_time); - setup_count = quantize_timing(ide_pio_timings[pio_mode].setup_time, + setup_count = quantize_timing(ide_pio_timings[pio].setup_time, 1000 / system_bus_clock()); /* @@ -266,16 +263,14 @@ static u8 cmd64x_tune_pio (ide_drive_t *drive, u8 mode_wanted) arttim |= setup_values[setup_count]; (void) pci_write_config_byte(dev, arttim_regs[drive->dn], arttim); cmdprintk("Write 0x%02x to reg 0x%x\n", arttim, arttim_regs[drive->dn]); - - return pio_mode; } /* * Attempts to set drive's PIO mode. - * Special cases are 8: prefetch off, 9: prefetch on (both never worked), - * and 255: auto-select best mode (used at boot time). + * Special cases are 8: prefetch off, 9: prefetch on (both never worked) */ -static void cmd64x_tune_drive (ide_drive_t *drive, u8 pio) + +static void cmd64x_set_pio_mode(ide_drive_t *drive, const u8 pio) { /* * Filter out the prefetch control values @@ -284,19 +279,17 @@ static void cmd64x_tune_drive (ide_drive_t *drive, u8 pio) if (pio == 8 || pio == 9) return; - pio = cmd64x_tune_pio(drive, pio); + cmd64x_tune_pio(drive, pio); (void) ide_config_drive_speed(drive, XFER_PIO_0 + pio); } -static int cmd64x_tune_chipset (ide_drive_t *drive, u8 speed) +static int cmd64x_tune_chipset(ide_drive_t *drive, const u8 speed) { ide_hwif_t *hwif = HWIF(drive); struct pci_dev *dev = hwif->pci_dev; u8 unit = drive->dn & 0x01; u8 regU = 0, pciU = hwif->channel ? UDIDETCR1 : UDIDETCR0; - speed = ide_rate_filter(drive, speed); - if (speed >= XFER_SW_DMA_0) { (void) pci_read_config_byte(dev, pciU, ®U); regU &= ~(unit ? 0xCA : 0x35); @@ -330,14 +323,6 @@ static int cmd64x_tune_chipset (ide_drive_t *drive, u8 speed) case XFER_MW_DMA_0: program_cycle_times(drive, 480, 215); break; - case XFER_PIO_5: - case XFER_PIO_4: - case XFER_PIO_3: - case XFER_PIO_2: - case XFER_PIO_1: - case XFER_PIO_0: - (void) cmd64x_tune_pio(drive, speed - XFER_PIO_0); - break; default: return 1; } @@ -354,7 +339,7 @@ static int cmd64x_config_drive_for_dma (ide_drive_t *drive) return 0; if (ide_use_fast_pio(drive)) - cmd64x_tune_drive(drive, 255); + ide_set_max_pio(drive); return -1; } @@ -538,7 +523,7 @@ static void __devinit init_hwif_cmd64x(ide_hwif_t *hwif) pci_read_config_byte(dev, PCI_REVISION_ID, &rev); - hwif->tuneproc = &cmd64x_tune_drive; + hwif->set_pio_mode = &cmd64x_set_pio_mode; hwif->speedproc = &cmd64x_tune_chipset; hwif->drives[0].autotune = hwif->drives[1].autotune = 1; @@ -622,6 +607,7 @@ static ide_pci_device_t cmd64x_chipsets[] __devinitdata = { .autodma = AUTODMA, .enablebits = {{0x00,0x00,0x00}, {0x51,0x08,0x08}}, .bootable = ON_BOARD, + .host_flags = IDE_HFLAG_ABUSE_PREFETCH, .pio_mask = ATA_PIO5, .udma_mask = 0x00, /* no udma */ },{ /* 1 */ @@ -632,6 +618,7 @@ static ide_pci_device_t cmd64x_chipsets[] __devinitdata = { .autodma = AUTODMA, .enablebits = {{0x51,0x04,0x04}, {0x51,0x08,0x08}}, .bootable = ON_BOARD, + .host_flags = IDE_HFLAG_ABUSE_PREFETCH, .pio_mask = ATA_PIO5, .udma_mask = 0x07, /* udma0-2 */ },{ /* 2 */ @@ -642,6 +629,7 @@ static ide_pci_device_t cmd64x_chipsets[] __devinitdata = { .autodma = AUTODMA, .enablebits = {{0x51,0x04,0x04}, {0x51,0x08,0x08}}, .bootable = ON_BOARD, + .host_flags = IDE_HFLAG_ABUSE_PREFETCH, .pio_mask = ATA_PIO5, .udma_mask = 0x1f, /* udma0-4 */ },{ /* 3 */ @@ -652,6 +640,7 @@ static ide_pci_device_t cmd64x_chipsets[] __devinitdata = { .autodma = AUTODMA, .enablebits = {{0x51,0x04,0x04}, {0x51,0x08,0x08}}, .bootable = ON_BOARD, + .host_flags = IDE_HFLAG_ABUSE_PREFETCH, .pio_mask = ATA_PIO5, .udma_mask = 0x3f, /* udma0-5 */ } diff --git a/drivers/ide/pci/cs5520.c b/drivers/ide/pci/cs5520.c index b89e8165687..1217d2a747f 100644 --- a/drivers/ide/pci/cs5520.c +++ b/drivers/ide/pci/cs5520.c @@ -66,32 +66,13 @@ static struct pio_clocks cs5520_pio_clocks[]={ {1, 2, 1} }; -static int cs5520_tune_chipset(ide_drive_t *drive, u8 xferspeed) +static void cs5520_set_pio_mode(ide_drive_t *drive, const u8 pio) { ide_hwif_t *hwif = HWIF(drive); struct pci_dev *pdev = hwif->pci_dev; - u8 speed = min((u8)XFER_PIO_4, xferspeed); - int pio = speed; - u8 reg; int controller = drive->dn > 1 ? 1 : 0; - int error; - - switch(speed) - { - case XFER_PIO_4: - case XFER_PIO_3: - case XFER_PIO_2: - case XFER_PIO_1: - case XFER_PIO_0: - pio -= XFER_PIO_0; - break; - default: - pio = 0; - printk(KERN_ERR "cs55x0: bad ide timing.\n"); - } - - printk("PIO clocking = %d\n", pio); - + u8 reg; + /* FIXME: if DMA = 1 do we need to set the DMA bit here ? */ /* 8bit CAT/CRT - 8bit command timing for channel */ @@ -115,25 +96,28 @@ static int cs5520_tune_chipset(ide_drive_t *drive, u8 xferspeed) reg = inb(hwif->dma_base + 0x02 + 8*controller); reg |= 1<<((drive->dn&1)+5); outb(reg, hwif->dma_base + 0x02 + 8*controller); - - error = ide_config_drive_speed(drive, speed); - /* ATAPI is harder so leave it for now */ - if(!error && drive->media == ide_disk) - error = hwif->ide_dma_on(drive); - return error; -} - -static void cs5520_tune_drive(ide_drive_t *drive, u8 pio) + (void)ide_config_drive_speed(drive, XFER_PIO_0 + pio); +} + +static int cs5520_tune_chipset(ide_drive_t *drive, const u8 speed) { - pio = ide_get_best_pio_mode(drive, pio, 4); - cs5520_tune_chipset(drive, (XFER_PIO_0 + pio)); + printk(KERN_ERR "cs55x0: bad ide timing.\n"); + + cs5520_set_pio_mode(drive, 0); + + /* + * FIXME: this is incorrect to return zero here but + * since all users of ide_set_xfer_rate() ignore + * the return value it is not a problem currently + */ + return 0; } static int cs5520_config_drive_xfer_rate(ide_drive_t *drive) { /* Tune the drive for PIO modes up to PIO 4 */ - cs5520_tune_drive(drive, 255); + ide_set_max_pio(drive); /* Then tell the core to use DMA operations */ return 0; @@ -165,7 +149,7 @@ static int cs5520_dma_on(ide_drive_t *drive) static void __devinit init_hwif_cs5520(ide_hwif_t *hwif) { - hwif->tuneproc = &cs5520_tune_drive; + hwif->set_pio_mode = &cs5520_set_pio_mode; hwif->speedproc = &cs5520_tune_chipset; hwif->ide_dma_check = &cs5520_config_drive_xfer_rate; hwif->ide_dma_on = &cs5520_dma_on; @@ -179,7 +163,8 @@ static void __devinit init_hwif_cs5520(ide_hwif_t *hwif) hwif->drives[1].autotune = 1; return; } - + + /* ATAPI is harder so leave it for now */ hwif->atapi_dma = 0; hwif->ultra_mask = 0; hwif->swdma_mask = 0; diff --git a/drivers/ide/pci/cs5530.c b/drivers/ide/pci/cs5530.c index e5949b1d3fb..741507b4cd9 100644 --- a/drivers/ide/pci/cs5530.c +++ b/drivers/ide/pci/cs5530.c @@ -71,19 +71,18 @@ static void cs5530_tunepio(ide_drive_t *drive, u8 pio) } /** - * cs5530_tuneproc - select/set PIO modes + * cs5530_set_pio_mode - set PIO mode + * @drive: drive + * @pio: PIO mode number * - * cs5530_tuneproc() handles selection/setting of PIO modes - * for both the chipset and drive. + * Handles setting of PIO mode for both the chipset and drive. * - * The ide_init_cs5530() routine guarantees that all drives + * The init_hwif_cs5530() routine guarantees that all drives * will have valid default PIO timings set up before we get here. */ -static void cs5530_tuneproc (ide_drive_t *drive, u8 pio) /* pio=255 means "autotune" */ +static void cs5530_set_pio_mode(ide_drive_t *drive, const u8 pio) { - pio = ide_get_best_pio_mode(drive, pio, 4); - if (cs5530_set_xfer_mode(drive, XFER_PIO_0 + pio) == 0) cs5530_tunepio(drive, pio); } @@ -143,13 +142,11 @@ static int cs5530_config_dma(ide_drive_t *drive) return 1; } -static int cs5530_tune_chipset(ide_drive_t *drive, u8 mode) +static int cs5530_tune_chipset(ide_drive_t *drive, const u8 mode) { unsigned long basereg; unsigned int reg, timings = 0; - mode = ide_rate_filter(drive, mode); - /* * Tell the drive to switch to the new mode; abort on failure. */ @@ -166,13 +163,6 @@ static int cs5530_tune_chipset(ide_drive_t *drive, u8 mode) case XFER_MW_DMA_0: timings = 0x00077771; break; case XFER_MW_DMA_1: timings = 0x00012121; break; case XFER_MW_DMA_2: timings = 0x00002020; break; - case XFER_PIO_4: - case XFER_PIO_3: - case XFER_PIO_2: - case XFER_PIO_1: - case XFER_PIO_0: - cs5530_tunepio(drive, mode - XFER_PIO_0); - return 0; default: BUG(); break; @@ -308,7 +298,7 @@ static void __devinit init_hwif_cs5530 (ide_hwif_t *hwif) if (hwif->mate) hwif->serialized = hwif->mate->serialized = 1; - hwif->tuneproc = &cs5530_tuneproc; + hwif->set_pio_mode = &cs5530_set_pio_mode; hwif->speedproc = &cs5530_tune_chipset; basereg = CS5530_BASEREG(hwif); diff --git a/drivers/ide/pci/cs5535.c b/drivers/ide/pci/cs5535.c index 082ca7da2cb..383b7eccbcb 100644 --- a/drivers/ide/pci/cs5535.c +++ b/drivers/ide/pci/cs5535.c @@ -75,7 +75,7 @@ static unsigned int cs5535_udma_timings[5] = * * cs5535_set_speed() configures the chipset to a new speed. */ -static void cs5535_set_speed(ide_drive_t *drive, u8 speed) +static void cs5535_set_speed(ide_drive_t *drive, const u8 speed) { u32 reg = 0, dummy; @@ -141,23 +141,22 @@ static void cs5535_set_speed(ide_drive_t *drive, u8 speed) */ static int cs5535_set_drive(ide_drive_t *drive, u8 speed) { - speed = ide_rate_filter(drive, speed); ide_config_drive_speed(drive, speed); cs5535_set_speed(drive, speed); return 0; } -/**** - * cs5535_tuneproc - PIO setup - * @drive: drive to set up - * @pio: mode to use (255 for 'best possible') +/** + * cs5535_set_pio_mode - PIO setup + * @drive: drive + * @pio: PIO mode number * * A callback from the upper layers for PIO-only tuning. */ -static void cs5535_tuneproc(ide_drive_t *drive, u8 pio) + +static void cs5535_set_pio_mode(ide_drive_t *drive, const u8 pio) { - pio = ide_get_best_pio_mode(drive, pio, 4); ide_config_drive_speed(drive, XFER_PIO_0 + pio); cs5535_set_speed(drive, XFER_PIO_0 + pio); } @@ -170,7 +169,7 @@ static int cs5535_dma_check(ide_drive_t *drive) return 0; if (ide_use_fast_pio(drive)) - cs5535_tuneproc(drive, 255); + ide_set_max_pio(drive); return -1; } @@ -199,7 +198,7 @@ static void __devinit init_hwif_cs5535(ide_hwif_t *hwif) hwif->autodma = 0; - hwif->tuneproc = &cs5535_tuneproc; + hwif->set_pio_mode = &cs5535_set_pio_mode; hwif->speedproc = &cs5535_set_drive; hwif->ide_dma_check = &cs5535_dma_check; diff --git a/drivers/ide/pci/cy82c693.c b/drivers/ide/pci/cy82c693.c index daa36fcbc8e..dc278025d31 100644 --- a/drivers/ide/pci/cy82c693.c +++ b/drivers/ide/pci/cy82c693.c @@ -97,9 +97,6 @@ #define CY82_INDEX_CHANNEL1 0x31 #define CY82_INDEX_TIMEOUT 0x32 -/* the max PIO mode - from datasheet */ -#define CY82C693_MAX_PIO 4 - /* the min and max PCI bus speed in MHz - from datasheet */ #define CY82C963_MIN_BUS_SPEED 25 #define CY82C963_MAX_BUS_SPEED 33 @@ -148,9 +145,6 @@ static void compute_clocks (u8 pio, pio_clocks_t *p_pclk) * so you can play with the idebus=xx parameter */ - if (pio > CY82C693_MAX_PIO) - pio = CY82C693_MAX_PIO; - /* let's calc the address setup time clocks */ p_pclk->address_time = (u8)calc_clk(ide_pio_timings[pio].setup_time, bus_speed); @@ -269,10 +263,7 @@ static int cy82c693_ide_dma_on (ide_drive_t *drive) return __ide_dma_on(drive); } -/* - * tune ide drive - set PIO mode - */ -static void cy82c693_tune_drive (ide_drive_t *drive, u8 pio) +static void cy82c693_set_pio_mode(ide_drive_t *drive, const u8 pio) { ide_hwif_t *hwif = HWIF(drive); struct pci_dev *dev = hwif->pci_dev; @@ -329,13 +320,6 @@ static void cy82c693_tune_drive (ide_drive_t *drive, u8 pio) addrCtrl, pclk.time_16r, pclk.time_16w, pclk.time_8); #endif /* CY82C693_DEBUG_LOGS */ - /* first let's calc the pio modes */ - pio = ide_get_best_pio_mode(drive, pio, CY82C693_MAX_PIO); - -#if CY82C693_DEBUG_INFO - printk (KERN_INFO "%s: Selected PIO mode %d\n", drive->name, pio); -#endif /* CY82C693_DEBUG_INFO */ - /* let's calc the values for this PIO mode */ compute_clocks(pio, &pclk); @@ -447,7 +431,7 @@ static void __devinit init_hwif_cy82c693(ide_hwif_t *hwif) hwif->autodma = 0; hwif->chipset = ide_cy82c693; - hwif->tuneproc = &cy82c693_tune_drive; + hwif->set_pio_mode = &cy82c693_set_pio_mode; if (!hwif->dma_base) { hwif->drives[0].autotune = 1; diff --git a/drivers/ide/pci/hpt34x.c b/drivers/ide/pci/hpt34x.c index cb8fe5643d3..a1bb10188fe 100644 --- a/drivers/ide/pci/hpt34x.c +++ b/drivers/ide/pci/hpt34x.c @@ -43,10 +43,9 @@ #define HPT343_DEBUG_DRIVE_INFO 0 -static int hpt34x_tune_chipset (ide_drive_t *drive, u8 xferspeed) +static int hpt34x_tune_chipset(ide_drive_t *drive, const u8 speed) { struct pci_dev *dev = HWIF(drive)->pci_dev; - u8 speed = ide_rate_filter(drive, xferspeed); u32 reg1= 0, tmp1 = 0, reg2 = 0, tmp2 = 0; u8 hi_speed, lo_speed; @@ -78,9 +77,8 @@ static int hpt34x_tune_chipset (ide_drive_t *drive, u8 xferspeed) return(ide_config_drive_speed(drive, speed)); } -static void hpt34x_tune_drive (ide_drive_t *drive, u8 pio) +static void hpt34x_set_pio_mode(ide_drive_t *drive, const u8 pio) { - pio = ide_get_best_pio_mode(drive, pio, 5); (void) hpt34x_tune_chipset(drive, (XFER_PIO_0 + pio)); } @@ -92,7 +90,7 @@ static int hpt34x_config_drive_xfer_rate (ide_drive_t *drive) return -1; if (ide_use_fast_pio(drive)) - hpt34x_tune_drive(drive, 255); + ide_set_max_pio(drive); return -1; } @@ -146,7 +144,7 @@ static void __devinit init_hwif_hpt34x(ide_hwif_t *hwif) hwif->autodma = 0; - hwif->tuneproc = &hpt34x_tune_drive; + hwif->set_pio_mode = &hpt34x_set_pio_mode; hwif->speedproc = &hpt34x_tune_chipset; hwif->drives[0].autotune = 1; hwif->drives[1].autotune = 1; diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c index 39f1c89f7c8..0e7d3b60d43 100644 --- a/drivers/ide/pci/hpt366.c +++ b/drivers/ide/pci/hpt366.c @@ -1,5 +1,5 @@ /* - * linux/drivers/ide/pci/hpt366.c Version 1.12 Aug 19, 2007 + * linux/drivers/ide/pci/hpt366.c Version 1.13 Sep 29, 2007 * * Copyright (C) 1999-2003 Andre Hedrick <andre@linux-ide.org> * Portions Copyright (C) 2001 Sun Microsystems, Inc. @@ -114,7 +114,7 @@ * unify HPT36x/37x timing setup code and the speedproc handlers by joining * the register setting lists into the table indexed by the clock selected * - set the correct hwif->ultra_mask for each individual chip - * - add UltraDMA mode filtering for the HPT37[24] based SATA cards + * - add Ultra and MW DMA mode filtering for the HPT37[24] based SATA cards * Sergei Shtylyov, <sshtylyov@ru.mvista.com> or <source@mvista.com> */ @@ -562,6 +562,24 @@ static u8 hpt3xx_udma_filter(ide_drive_t *drive) return check_in_drive_list(drive, bad_ata33) ? 0x00 : mask; } +static u8 hpt3xx_mdma_filter(ide_drive_t *drive) +{ + ide_hwif_t *hwif = HWIF(drive); + struct hpt_info *info = pci_get_drvdata(hwif->pci_dev); + + switch (info->chip_type) { + case HPT372 : + case HPT372A: + case HPT372N: + case HPT374 : + if (ide_dev_is_sata(drive->id)) + return 0x00; + /* Fall thru */ + default: + return 0x07; + } +} + static u32 get_speed_setting(u8 speed, struct hpt_info *info) { int i; @@ -582,20 +600,15 @@ static u32 get_speed_setting(u8 speed, struct hpt_info *info) return (*info->settings)[i]; } -static int hpt36x_tune_chipset(ide_drive_t *drive, u8 xferspeed) +static int hpt36x_tune_chipset(ide_drive_t *drive, const u8 speed) { ide_hwif_t *hwif = HWIF(drive); struct pci_dev *dev = hwif->pci_dev; struct hpt_info *info = pci_get_drvdata(dev); - u8 speed = ide_rate_filter(drive, xferspeed); u8 itr_addr = drive->dn ? 0x44 : 0x40; u32 old_itr = 0; u32 itr_mask, new_itr; - /* TODO: move this to ide_rate_filter() [ check ->atapi_dma ] */ - if (drive->media != ide_disk) - speed = min_t(u8, speed, XFER_PIO_4); - itr_mask = speed < XFER_MW_DMA_0 ? 0x30070000 : (speed < XFER_UDMA_0 ? 0xc0070000 : 0xc03800ff); @@ -614,20 +627,15 @@ static int hpt36x_tune_chipset(ide_drive_t *drive, u8 xferspeed) return ide_config_drive_speed(drive, speed); } -static int hpt37x_tune_chipset(ide_drive_t *drive, u8 xferspeed) +static int hpt37x_tune_chipset(ide_drive_t *drive, const u8 speed) { ide_hwif_t *hwif = HWIF(drive); struct pci_dev *dev = hwif->pci_dev; struct hpt_info *info = pci_get_drvdata(dev); - u8 speed = ide_rate_filter(drive, xferspeed); u8 itr_addr = 0x40 + (drive->dn * 4); u32 old_itr = 0; u32 itr_mask, new_itr; - /* TODO: move this to ide_rate_filter() [ check ->atapi_dma ] */ - if (drive->media != ide_disk) - speed = min_t(u8, speed, XFER_PIO_4); - itr_mask = speed < XFER_MW_DMA_0 ? 0x303c0000 : (speed < XFER_UDMA_0 ? 0xc03c0000 : 0xc1c001ff); @@ -654,9 +662,8 @@ static int hpt3xx_tune_chipset(ide_drive_t *drive, u8 speed) return hpt36x_tune_chipset(drive, speed); } -static void hpt3xx_tune_drive(ide_drive_t *drive, u8 pio) +static void hpt3xx_set_pio_mode(ide_drive_t *drive, const u8 pio) { - pio = ide_get_best_pio_mode(drive, pio, 4); (void) hpt3xx_tune_chipset (drive, XFER_PIO_0 + pio); } @@ -718,7 +725,7 @@ static int hpt366_config_drive_xfer_rate(ide_drive_t *drive) return 0; if (ide_use_fast_pio(drive)) - hpt3xx_tune_drive(drive, 255); + ide_set_max_pio(drive); return -1; } @@ -1249,7 +1256,7 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif) /* Cache the channel's MISC. control registers' offset */ hwif->select_data = hwif->channel ? 0x54 : 0x50; - hwif->tuneproc = &hpt3xx_tune_drive; + hwif->set_pio_mode = &hpt3xx_set_pio_mode; hwif->speedproc = &hpt3xx_tune_chipset; hwif->quirkproc = &hpt3xx_quirkproc; hwif->intrproc = &hpt3xx_intrproc; @@ -1257,6 +1264,7 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif) hwif->busproc = &hpt3xx_busproc; hwif->udma_filter = &hpt3xx_udma_filter; + hwif->mdma_filter = &hpt3xx_mdma_filter; /* * HPT3xxN chips have some complications: diff --git a/drivers/ide/pci/it8213.c b/drivers/ide/pci/it8213.c index 70b3245dbf6..76e91ff9420 100644 --- a/drivers/ide/pci/it8213.c +++ b/drivers/ide/pci/it8213.c @@ -105,9 +105,8 @@ static void it8213_tune_pio(ide_drive_t *drive, const u8 pio) spin_unlock_irqrestore(&tune_lock, flags); } -static void it8213_tuneproc(ide_drive_t *drive, u8 pio) +static void it8213_set_pio_mode(ide_drive_t *drive, const u8 pio) { - pio = ide_get_best_pio_mode(drive, pio, 4); it8213_tune_pio(drive, pio); ide_config_drive_speed(drive, XFER_PIO_0 + pio); } @@ -115,20 +114,16 @@ static void it8213_tuneproc(ide_drive_t *drive, u8 pio) /** * it8213_tune_chipset - set controller timings * @drive: Drive to set up - * @xferspeed: speed we want to achieve + * @speed: speed we want to achieve * - * Tune the ITE chipset for the desired mode. If we can't achieve - * the desired mode then tune for a lower one, but ultimately - * make the thing work. + * Tune the ITE chipset for the desired mode. */ -static int it8213_tune_chipset (ide_drive_t *drive, u8 xferspeed) +static int it8213_tune_chipset(ide_drive_t *drive, const u8 speed) { - ide_hwif_t *hwif = HWIF(drive); struct pci_dev *dev = hwif->pci_dev; u8 maslave = 0x40; - u8 speed = ide_rate_filter(drive, xferspeed); int a_speed = 3 << (drive->dn * 4); int u_flag = 1 << drive->dn; int v_flag = 0x01 << drive->dn; @@ -156,12 +151,6 @@ static int it8213_tune_chipset (ide_drive_t *drive, u8 xferspeed) case XFER_MW_DMA_1: case XFER_SW_DMA_2: break; - case XFER_PIO_4: - case XFER_PIO_3: - case XFER_PIO_2: - case XFER_PIO_1: - case XFER_PIO_0: - break; default: return -1; } @@ -193,10 +182,7 @@ static int it8213_tune_chipset (ide_drive_t *drive, u8 xferspeed) pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag); } - if (speed > XFER_PIO_4) - it8213_tune_pio(drive, it8213_dma_2_pio(speed)); - else - it8213_tune_pio(drive, speed - XFER_PIO_0); + it8213_tune_pio(drive, it8213_dma_2_pio(speed)); return ide_config_drive_speed(drive, speed); } @@ -216,7 +202,7 @@ static int it8213_config_drive_for_dma (ide_drive_t *drive) if (ide_tune_dma(drive)) return 0; - it8213_tuneproc(drive, 255); + ide_set_max_pio(drive); return -1; } @@ -235,7 +221,7 @@ static void __devinit init_hwif_it8213(ide_hwif_t *hwif) u8 reg42h = 0; hwif->speedproc = &it8213_tune_chipset; - hwif->tuneproc = &it8213_tuneproc; + hwif->set_pio_mode = &it8213_set_pio_mode; hwif->autodma = 0; diff --git a/drivers/ide/pci/it821x.c b/drivers/ide/pci/it821x.c index 9286c99e2ff..758a98230cc 100644 --- a/drivers/ide/pci/it821x.c +++ b/drivers/ide/pci/it821x.c @@ -274,9 +274,8 @@ static int it821x_tunepio(ide_drive_t *drive, u8 set_pio) return ide_config_drive_speed(drive, XFER_PIO_0 + set_pio); } -static void it821x_tuneproc(ide_drive_t *drive, u8 pio) +static void it821x_set_pio_mode(ide_drive_t *drive, const u8 pio) { - pio = ide_get_best_pio_mode(drive, pio, 4); (void)it821x_tunepio(drive, pio); } @@ -405,32 +404,19 @@ static int it821x_dma_end(ide_drive_t *drive) return ret; } - /** * it821x_tune_chipset - set controller timings * @drive: Drive to set up - * @xferspeed: speed we want to achieve + * @speed: speed we want to achieve * - * Tune the ITE chipset for the desired mode. If we can't achieve - * the desired mode then tune for a lower one, but ultimately - * make the thing work. + * Tune the ITE chipset for the desired mode. */ -static int it821x_tune_chipset (ide_drive_t *drive, byte xferspeed) +static int it821x_tune_chipset(ide_drive_t *drive, const u8 speed) { ide_hwif_t *hwif = drive->hwif; struct it821x_dev *itdev = ide_get_hwifdata(hwif); - u8 speed = ide_rate_filter(drive, xferspeed); - - switch (speed) { - case XFER_PIO_4: - case XFER_PIO_3: - case XFER_PIO_2: - case XFER_PIO_1: - case XFER_PIO_0: - return it821x_tunepio(drive, speed - XFER_PIO_0); - } if (itdev->smart == 0) { switch (speed) { @@ -477,7 +463,7 @@ static int it821x_config_drive_for_dma (ide_drive_t *drive) if (ide_tune_dma(drive)) return 0; - it821x_tuneproc(drive, 255); + ide_set_max_pio(drive); return -1; } @@ -644,7 +630,7 @@ static void __devinit init_hwif_it821x(ide_hwif_t *hwif) } hwif->speedproc = &it821x_tune_chipset; - hwif->tuneproc = &it821x_tuneproc; + hwif->set_pio_mode = &it821x_set_pio_mode; /* MWDMA/PIO clock switching for pass through mode */ if(!idev->smart) { diff --git a/drivers/ide/pci/jmicron.c b/drivers/ide/pci/jmicron.c index 65a0ff352b9..d379fbaf674 100644 --- a/drivers/ide/pci/jmicron.c +++ b/drivers/ide/pci/jmicron.c @@ -83,26 +83,22 @@ static u8 __devinit ata66_jmicron(ide_hwif_t *hwif) return ATA_CBL_PATA80; } -static void jmicron_tuneproc(ide_drive_t *drive, u8 pio) +static void jmicron_set_pio_mode(ide_drive_t *drive, const u8 pio) { - pio = ide_get_best_pio_mode(drive, pio, 5); ide_config_drive_speed(drive, XFER_PIO_0 + pio); } /** * jmicron_tune_chipset - set controller timings * @drive: Drive to set up - * @xferspeed: speed we want to achieve + * @speed: speed we want to achieve * * As the JMicron snoops for timings all we actually need to do is - * make sure we don't set an invalid mode. We do need to honour - * the cable detect here. + * set the transfer mode on the device. */ -static int jmicron_tune_chipset (ide_drive_t *drive, byte xferspeed) +static int jmicron_tune_chipset(ide_drive_t *drive, const u8 speed) { - u8 speed = ide_rate_filter(drive, xferspeed); - return ide_config_drive_speed(drive, speed); } @@ -119,7 +115,7 @@ static int jmicron_config_drive_for_dma (ide_drive_t *drive) if (ide_tune_dma(drive)) return 0; - jmicron_tuneproc(drive, 255); + ide_set_max_pio(drive); return -1; } @@ -134,7 +130,7 @@ static int jmicron_config_drive_for_dma (ide_drive_t *drive) static void __devinit init_hwif_jmicron(ide_hwif_t *hwif) { hwif->speedproc = &jmicron_tune_chipset; - hwif->tuneproc = &jmicron_tuneproc; + hwif->set_pio_mode = &jmicron_set_pio_mode; hwif->drives[0].autotune = 1; hwif->drives[1].autotune = 1; @@ -160,22 +156,13 @@ fallback: return; } -#define DECLARE_JMB_DEV(name_str) \ - { \ - .name = name_str, \ - .init_hwif = init_hwif_jmicron, \ - .autodma = AUTODMA, \ - .bootable = ON_BOARD, \ - .enablebits = { {0x40, 1, 1}, {0x40, 0x10, 0x10} }, \ - .pio_mask = ATA_PIO5, \ - } - -static ide_pci_device_t jmicron_chipsets[] __devinitdata = { - /* 0 */ DECLARE_JMB_DEV("JMB361"), - /* 1 */ DECLARE_JMB_DEV("JMB363"), - /* 2 */ DECLARE_JMB_DEV("JMB365"), - /* 3 */ DECLARE_JMB_DEV("JMB366"), - /* 4 */ DECLARE_JMB_DEV("JMB368"), +static ide_pci_device_t jmicron_chipset __devinitdata = { + .name = "JMB", + .init_hwif = init_hwif_jmicron, + .autodma = AUTODMA, + .bootable = ON_BOARD, + .enablebits = { { 0x40, 0x01, 0x01 }, { 0x40, 0x10, 0x10 } }, + .pio_mask = ATA_PIO5, }; /** @@ -189,35 +176,29 @@ static ide_pci_device_t jmicron_chipsets[] __devinitdata = { static int __devinit jmicron_init_one(struct pci_dev *dev, const struct pci_device_id *id) { - ide_setup_pci_device(dev, &jmicron_chipsets[id->driver_data]); + ide_setup_pci_device(dev, &jmicron_chipset); return 0; } -/* If libata is configured, jmicron PCI quirk will configure it such - * that the SATA ports are in AHCI function while the PATA ports are - * in a separate IDE function. In such cases, match device class and - * attach only to IDE. If libata isn't configured, keep the old - * behavior for backward compatibility. +/* All JMB PATA controllers have and will continue to have the same + * interface. Matching vendor and device class is enough for all + * current and future controllers if the controller is programmed + * properly. + * + * If libata is configured, jmicron PCI quirk programs the controller + * into the correct mode. If libata isn't configured, match known + * device IDs too to maintain backward compatibility. */ -#if defined(CONFIG_ATA) || defined(CONFIG_ATA_MODULE) -#define JMB_CLASS PCI_CLASS_STORAGE_IDE << 8 -#define JMB_CLASS_MASK 0xffff00 -#else -#define JMB_CLASS 0 -#define JMB_CLASS_MASK 0 -#endif - static struct pci_device_id jmicron_pci_tbl[] = { - { PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361, - PCI_ANY_ID, PCI_ANY_ID, JMB_CLASS, JMB_CLASS_MASK, 0}, - { PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363, - PCI_ANY_ID, PCI_ANY_ID, JMB_CLASS, JMB_CLASS_MASK, 1}, - { PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365, - PCI_ANY_ID, PCI_ANY_ID, JMB_CLASS, JMB_CLASS_MASK, 2}, - { PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366, - PCI_ANY_ID, PCI_ANY_ID, JMB_CLASS, JMB_CLASS_MASK, 3}, - { PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB368, - PCI_ANY_ID, PCI_ANY_ID, JMB_CLASS, JMB_CLASS_MASK, 4}, +#if !defined(CONFIG_ATA) && !defined(CONFIG_ATA_MODULE) + { PCI_VDEVICE(JMICRON, PCI_DEVICE_ID_JMICRON_JMB361) }, + { PCI_VDEVICE(JMICRON, PCI_DEVICE_ID_JMICRON_JMB363) }, + { PCI_VDEVICE(JMICRON, PCI_DEVICE_ID_JMICRON_JMB365) }, + { PCI_VDEVICE(JMICRON, PCI_DEVICE_ID_JMICRON_JMB366) }, + { PCI_VDEVICE(JMICRON, PCI_DEVICE_ID_JMICRON_JMB368) }, +#endif + { PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, + PCI_CLASS_STORAGE_IDE << 8, 0xffff00, 0 }, { 0, }, }; diff --git a/drivers/ide/pci/opti621.c b/drivers/ide/pci/opti621.c index 3a2bb272351..9fa06393469 100644 --- a/drivers/ide/pci/opti621.c +++ b/drivers/ide/pci/opti621.c @@ -47,7 +47,7 @@ * The main problem with OPTi is that some timings for master * and slave must be the same. For example, if you have master * PIO 3 and slave PIO 0, driver have to set some timings of - * master for PIO 0. Second problem is that opti621_tune_drive + * master for PIO 0. Second problem is that opti621_set_pio_mode * got only one drive to set, but have to set both drives. * This is solved in compute_pios. If you don't set * the second drive, compute_pios use ide_get_best_pio_mode @@ -103,7 +103,7 @@ #include <asm/io.h> -#define OPTI621_MAX_PIO 3 +//#define OPTI621_MAX_PIO 3 /* In fact, I do not have any PIO 4 drive * (address: 25 ns, data: 70 ns, recovery: 35 ns), * but OPTi 82C621 is programmable and it can do (minimal values): @@ -136,8 +136,8 @@ static int reg_base; #define PIO_NOT_EXIST 254 #define PIO_DONT_KNOW 255 -/* there are stored pio numbers from other calls of opti621_tune_drive */ -static void compute_pios(ide_drive_t *drive, u8 pio) +/* there are stored pio numbers from other calls of opti621_set_pio_mode */ +static void compute_pios(ide_drive_t *drive, const u8 pio) /* Store values into drive->drive_data * second_contr - 0 for primary controller, 1 for secondary * slave_drive - 0 -> pio is for master, 1 -> pio is for slave @@ -147,12 +147,13 @@ static void compute_pios(ide_drive_t *drive, u8 pio) int d; ide_hwif_t *hwif = HWIF(drive); - drive->drive_data = ide_get_best_pio_mode(drive, pio, OPTI621_MAX_PIO); + drive->drive_data = pio; + for (d = 0; d < 2; ++d) { drive = &hwif->drives[d]; if (drive->present) { if (drive->drive_data == PIO_DONT_KNOW) - drive->drive_data = ide_get_best_pio_mode(drive, 255, OPTI621_MAX_PIO); + drive->drive_data = ide_get_best_pio_mode(drive, 255, 3); #ifdef OPTI621_DEBUG printk("%s: Selected PIO mode %d\n", drive->name, drive->drive_data); @@ -240,8 +241,7 @@ static void compute_clocks(int pio, pio_clocks_t *clks) } -/* Main tune procedure, called from tuneproc. */ -static void opti621_tune_drive (ide_drive_t *drive, u8 pio) +static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio) { /* primary and secondary drives share some registers, * so we have to program both drives @@ -331,7 +331,8 @@ static void __devinit init_hwif_opti621 (ide_hwif_t *hwif) hwif->autodma = 0; hwif->drives[0].drive_data = PIO_DONT_KNOW; hwif->drives[1].drive_data = PIO_DONT_KNOW; - hwif->tuneproc = &opti621_tune_drive; + + hwif->set_pio_mode = &opti621_set_pio_mode; if (!(hwif->dma_base)) return; diff --git a/drivers/ide/pci/pdc202xx_new.c b/drivers/ide/pci/pdc202xx_new.c index 7b0e479c355..5fb1eedc819 100644 --- a/drivers/ide/pci/pdc202xx_new.c +++ b/drivers/ide/pci/pdc202xx_new.c @@ -146,14 +146,12 @@ static struct udma_timing { { 0x1a, 0x01, 0xcb }, /* UDMA mode 6 */ }; -static int pdcnew_tune_chipset(ide_drive_t *drive, u8 speed) +static int pdcnew_tune_chipset(ide_drive_t *drive, const u8 speed) { ide_hwif_t *hwif = HWIF(drive); u8 adj = (drive->dn & 1) ? 0x08 : 0x00; int err; - speed = ide_rate_filter(drive, speed); - /* * Issue SETFEATURES_XFER to the drive first. PDC202xx hardware will * automatically set the timing registers based on 100 MHz PLL output. @@ -217,9 +215,8 @@ static int pdcnew_tune_chipset(ide_drive_t *drive, u8 speed) return err; } -static void pdcnew_tune_drive(ide_drive_t *drive, u8 pio) +static void pdcnew_set_pio_mode(ide_drive_t *drive, const u8 pio) { - pio = ide_get_best_pio_mode(drive, pio, 4); (void)pdcnew_tune_chipset(drive, XFER_PIO_0 + pio); } @@ -239,7 +236,7 @@ static int pdcnew_config_drive_xfer_rate(ide_drive_t *drive) return 0; if (ide_use_fast_pio(drive)) - pdcnew_tune_drive(drive, 255); + ide_set_max_pio(drive); return -1; } @@ -492,7 +489,8 @@ static void __devinit init_hwif_pdc202new(ide_hwif_t *hwif) { hwif->autodma = 0; - hwif->tuneproc = &pdcnew_tune_drive; + hwif->set_pio_mode = &pdcnew_set_pio_mode; + hwif->quirkproc = &pdcnew_quirkproc; hwif->speedproc = &pdcnew_tune_chipset; hwif->resetproc = &pdcnew_reset; @@ -524,44 +522,52 @@ static int __devinit init_setup_pdcnew(struct pci_dev *dev, ide_pci_device_t *d) return ide_setup_pci_device(dev, d); } -static int __devinit init_setup_pdc20270(struct pci_dev *dev, - ide_pci_device_t *d) +static int __devinit init_setup_pdc20270(struct pci_dev *dev, ide_pci_device_t *d) { - struct pci_dev *findev = NULL; - int ret; + struct pci_dev *bridge = dev->bus->self; + + if (bridge != NULL && + bridge->vendor == PCI_VENDOR_ID_DEC && + bridge->device == PCI_DEVICE_ID_DEC_21150) { + struct pci_dev *dev2; - if ((dev->bus->self && - dev->bus->self->vendor == PCI_VENDOR_ID_DEC) && - (dev->bus->self->device == PCI_DEVICE_ID_DEC_21150)) { if (PCI_SLOT(dev->devfn) & 2) return -ENODEV; - while ((findev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, findev)) != NULL) { - if ((findev->vendor == dev->vendor) && - (findev->device == dev->device) && - (PCI_SLOT(findev->devfn) & 2)) { - if (findev->irq != dev->irq) { - findev->irq = dev->irq; - } - ret = ide_setup_pci_devices(dev, findev, d); - if (ret < 0) - pci_dev_put(findev); - return ret; + dev2 = pci_get_slot(dev->bus, PCI_DEVFN(PCI_SLOT(dev->devfn) + 2, + PCI_FUNC(dev->devfn))); + if (dev2 != NULL && + dev2->vendor == dev->vendor && + dev2->device == dev->device) { + int ret; + + if (dev2->irq != dev->irq) { + dev2->irq = dev->irq; + + printk(KERN_WARNING "%s: PCI config space " + "interrupt fixed.\n", d->name); } + + ret = ide_setup_pci_devices(dev, dev2, d); + if (ret < 0) + pci_dev_put(dev2); + return ret; } } return ide_setup_pci_device(dev, d); } -static int __devinit init_setup_pdc20276(struct pci_dev *dev, - ide_pci_device_t *d) +static int __devinit init_setup_pdc20276(struct pci_dev *dev, ide_pci_device_t *d) { - if ((dev->bus->self) && - (dev->bus->self->vendor == PCI_VENDOR_ID_INTEL) && - ((dev->bus->self->device == PCI_DEVICE_ID_INTEL_I960) || - (dev->bus->self->device == PCI_DEVICE_ID_INTEL_I960RM))) { - printk(KERN_INFO "ide: Skipping Promise PDC20276 " - "attached to I2O RAID controller.\n"); + struct pci_dev *bridge = dev->bus->self; + + if (bridge != NULL && + bridge->vendor == PCI_VENDOR_ID_INTEL && + (bridge->device == PCI_DEVICE_ID_INTEL_I960 || + bridge->device == PCI_DEVICE_ID_INTEL_I960RM)) { + + printk(KERN_INFO "%s: attached to I2O RAID controller, " + "skipping.\n", d->name); return -ENODEV; } return ide_setup_pci_device(dev, d); diff --git a/drivers/ide/pci/pdc202xx_old.c b/drivers/ide/pci/pdc202xx_old.c index e19a891171c..b578307fad5 100644 --- a/drivers/ide/pci/pdc202xx_old.c +++ b/drivers/ide/pci/pdc202xx_old.c @@ -63,12 +63,11 @@ static const char *pdc_quirk_drives[] = { static void pdc_old_disable_66MHz_clock(ide_hwif_t *); -static int pdc202xx_tune_chipset (ide_drive_t *drive, u8 xferspeed) +static int pdc202xx_tune_chipset(ide_drive_t *drive, const u8 speed) { ide_hwif_t *hwif = HWIF(drive); struct pci_dev *dev = hwif->pci_dev; u8 drive_pci = 0x60 + (drive->dn << 2); - u8 speed = ide_rate_filter(drive, xferspeed); u8 AP = 0, BP = 0, CP = 0; u8 TA = 0, TB = 0, TC = 0; @@ -143,9 +142,8 @@ static int pdc202xx_tune_chipset (ide_drive_t *drive, u8 xferspeed) return ide_config_drive_speed(drive, speed); } -static void pdc202xx_tune_drive(ide_drive_t *drive, u8 pio) +static void pdc202xx_set_pio_mode(ide_drive_t *drive, const u8 pio) { - pio = ide_get_best_pio_mode(drive, pio, 4); pdc202xx_tune_chipset(drive, XFER_PIO_0 + pio); } @@ -191,7 +189,7 @@ static int pdc202xx_config_drive_xfer_rate (ide_drive_t *drive) return 0; if (ide_use_fast_pio(drive)) - pdc202xx_tune_drive(drive, 255); + ide_set_max_pio(drive); return -1; } @@ -307,10 +305,11 @@ static void pdc202xx_reset (ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); ide_hwif_t *mate = hwif->mate; - + pdc202xx_reset_host(hwif); pdc202xx_reset_host(mate); - pdc202xx_tune_drive(drive, 255); + + ide_set_max_pio(drive); } static unsigned int __devinit init_chipset_pdc202xx(struct pci_dev *dev, @@ -329,7 +328,9 @@ static void __devinit init_hwif_pdc202xx(ide_hwif_t *hwif) hwif->rqsize = 256; hwif->autodma = 0; - hwif->tuneproc = &pdc202xx_tune_drive; + + hwif->set_pio_mode = &pdc202xx_set_pio_mode; + hwif->quirkproc = &pdc202xx_quirkproc; if (hwif->pci_dev->device != PCI_DEVICE_ID_PROMISE_20246) diff --git a/drivers/ide/pci/piix.c b/drivers/ide/pci/piix.c index 5cfa9378bbb..fd8214a7ab9 100644 --- a/drivers/ide/pci/piix.c +++ b/drivers/ide/pci/piix.c @@ -1,5 +1,5 @@ /* - * linux/drivers/ide/pci/piix.c Version 0.51 Jul 6, 2007 + * linux/drivers/ide/pci/piix.c Version 0.52 Jul 14, 2007 * * Copyright (C) 1998-1999 Andrzej Krzysztofowicz, Author and Maintainer * Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org> @@ -17,11 +17,11 @@ * 41 * 43 * - * | PIO 0 | c0 | 80 | 0 | piix_tune_drive(drive, 0); - * | PIO 2 | SW2 | d0 | 90 | 4 | piix_tune_drive(drive, 2); - * | PIO 3 | MW1 | e1 | a1 | 9 | piix_tune_drive(drive, 3); - * | PIO 4 | MW2 | e3 | a3 | b | piix_tune_drive(drive, 4); - * + * | PIO 0 | c0 | 80 | 0 | + * | PIO 2 | SW2 | d0 | 90 | 4 | + * | PIO 3 | MW1 | e1 | a1 | 9 | + * | PIO 4 | MW2 | e3 | a3 | b | + * * sitre = word40 & 0x4000; primary * sitre = word42 & 0x4000; secondary * @@ -204,16 +204,16 @@ static void piix_tune_pio (ide_drive_t *drive, u8 pio) } /** - * piix_tune_drive - tune a drive attached to PIIX + * piix_set_pio_mode - set PIO mode * @drive: drive to tune * @pio: desired PIO mode * * Set the drive's PIO mode (might be useful if drive is not registered * in CMOS for any reason). */ -static void piix_tune_drive (ide_drive_t *drive, u8 pio) + +static void piix_set_pio_mode(ide_drive_t *drive, const u8 pio) { - pio = ide_get_best_pio_mode(drive, pio, 4); piix_tune_pio(drive, pio); (void) ide_config_drive_speed(drive, XFER_PIO_0 + pio); } @@ -221,19 +221,18 @@ static void piix_tune_drive (ide_drive_t *drive, u8 pio) /** * piix_tune_chipset - tune a PIIX interface * @drive: IDE drive to tune - * @xferspeed: speed to configure + * @speed: speed to configure * * Set a PIIX interface channel to the desired speeds. This involves * requires the right timing data into the PIIX configuration space * then setting the drive parameters appropriately */ - -static int piix_tune_chipset (ide_drive_t *drive, u8 xferspeed) + +static int piix_tune_chipset(ide_drive_t *drive, const u8 speed) { ide_hwif_t *hwif = HWIF(drive); struct pci_dev *dev = hwif->pci_dev; u8 maslave = hwif->channel ? 0x42 : 0x40; - u8 speed = ide_rate_filter(drive, xferspeed); int a_speed = 3 << (drive->dn * 4); int u_flag = 1 << drive->dn; int v_flag = 0x01 << drive->dn; @@ -260,11 +259,6 @@ static int piix_tune_chipset (ide_drive_t *drive, u8 xferspeed) case XFER_MW_DMA_2: case XFER_MW_DMA_1: case XFER_SW_DMA_2: break; - case XFER_PIO_4: - case XFER_PIO_3: - case XFER_PIO_2: - case XFER_PIO_1: - case XFER_PIO_0: break; default: return -1; } @@ -294,10 +288,7 @@ static int piix_tune_chipset (ide_drive_t *drive, u8 xferspeed) pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag); } - if (speed > XFER_PIO_4) - piix_tune_pio(drive, piix_dma_2_pio(speed)); - else - piix_tune_pio(drive, speed - XFER_PIO_0); + piix_tune_pio(drive, piix_dma_2_pio(speed)); return ide_config_drive_speed(drive, speed); } @@ -318,7 +309,7 @@ static int piix_config_drive_xfer_rate (ide_drive_t *drive) return 0; if (ide_use_fast_pio(drive)) - piix_tune_drive(drive, 255); + ide_set_max_pio(drive); return -1; } @@ -455,7 +446,8 @@ static void __devinit init_hwif_piix(ide_hwif_t *hwif) } hwif->autodma = 0; - hwif->tuneproc = &piix_tune_drive; + + hwif->set_pio_mode = &piix_set_pio_mode; hwif->speedproc = &piix_tune_chipset; hwif->drives[0].autotune = 1; hwif->drives[1].autotune = 1; diff --git a/drivers/ide/pci/sc1200.c b/drivers/ide/pci/sc1200.c index 9bdc9694d50..79ecab68948 100644 --- a/drivers/ide/pci/sc1200.c +++ b/drivers/ide/pci/sc1200.c @@ -138,7 +138,7 @@ out: return mask; } -static int sc1200_tune_chipset(ide_drive_t *drive, u8 mode) +static int sc1200_tune_chipset(ide_drive_t *drive, const u8 mode) { ide_hwif_t *hwif = HWIF(drive); int unit = drive->select.b.unit; @@ -146,25 +146,11 @@ static int sc1200_tune_chipset(ide_drive_t *drive, u8 mode) unsigned short pci_clock; unsigned int basereg = hwif->channel ? 0x50 : 0x40; - mode = ide_rate_filter(drive, mode); - /* * Tell the drive to switch to the new mode; abort on failure. */ - if (sc1200_set_xfer_mode(drive, mode)) { - printk("SC1200: set xfer mode failure\n"); + if (sc1200_set_xfer_mode(drive, mode)) return 1; /* failure */ - } - - switch (mode) { - case XFER_PIO_4: - case XFER_PIO_3: - case XFER_PIO_2: - case XFER_PIO_1: - case XFER_PIO_0: - sc1200_tunepio(drive, mode - XFER_PIO_0); - return 0; - } pci_clock = sc1200_get_pci_clock(); @@ -274,19 +260,20 @@ static int sc1200_ide_dma_end (ide_drive_t *drive) } /* - * sc1200_tuneproc() handles selection/setting of PIO modes + * sc1200_set_pio_mode() handles setting of PIO modes * for both the chipset and drive. * * All existing BIOSs for this chipset guarantee that all drives * will have valid default PIO timings set up before we get here. */ -static void sc1200_tuneproc (ide_drive_t *drive, byte pio) /* mode=255 means "autotune" */ + +static void sc1200_set_pio_mode(ide_drive_t *drive, const u8 pio) { ide_hwif_t *hwif = HWIF(drive); int mode = -1; /* - * bad abuse of ->tuneproc interface + * bad abuse of ->set_pio_mode interface */ switch (pio) { case 200: mode = XFER_UDMA_0; break; @@ -304,9 +291,6 @@ static void sc1200_tuneproc (ide_drive_t *drive, byte pio) /* mode=255 means "au return; } - pio = ide_get_best_pio_mode(drive, pio, 4); - printk("SC1200: %s: setting PIO mode%d\n", drive->name, pio); - if (sc1200_set_xfer_mode(drive, XFER_PIO_0 + pio) == 0) sc1200_tunepio(drive, pio); } @@ -422,7 +406,8 @@ static void __devinit init_hwif_sc1200 (ide_hwif_t *hwif) hwif->ide_dma_end = &sc1200_ide_dma_end; if (!noautodma) hwif->autodma = 1; - hwif->tuneproc = &sc1200_tuneproc; + + hwif->set_pio_mode = &sc1200_set_pio_mode; hwif->speedproc = &sc1200_tune_chipset; } hwif->atapi_dma = 1; @@ -438,6 +423,7 @@ static ide_pci_device_t sc1200_chipset __devinitdata = { .init_hwif = init_hwif_sc1200, .autodma = AUTODMA, .bootable = ON_BOARD, + .host_flags = IDE_HFLAG_ABUSE_DMA_MODES, .pio_mask = ATA_PIO4, }; diff --git a/drivers/ide/pci/scc_pata.c b/drivers/ide/pci/scc_pata.c index eeb0a6d434a..66a526e0ece 100644 --- a/drivers/ide/pci/scc_pata.c +++ b/drivers/ide/pci/scc_pata.c @@ -221,9 +221,8 @@ static void scc_tune_pio(ide_drive_t *drive, const u8 pio) out_be32((void __iomem *)pioct_port, reg); } -static void scc_tuneproc(ide_drive_t *drive, u8 pio) +static void scc_set_pio_mode(ide_drive_t *drive, const u8 pio) { - pio = ide_get_best_pio_mode(drive, pio, 4); scc_tune_pio(drive, pio); ide_config_drive_speed(drive, XFER_PIO_0 + pio); } @@ -231,16 +230,15 @@ static void scc_tuneproc(ide_drive_t *drive, u8 pio) /** * scc_tune_chipset - tune a drive DMA mode * @drive: Drive to set up - * @xferspeed: speed we want to achieve + * @speed: speed we want to achieve * * Load the timing settings for this device mode into the * controller. */ -static int scc_tune_chipset(ide_drive_t *drive, byte xferspeed) +static int scc_tune_chipset(ide_drive_t *drive, const u8 speed) { ide_hwif_t *hwif = HWIF(drive); - u8 speed = ide_rate_filter(drive, xferspeed); struct scc_ports *ports = ide_get_hwifdata(hwif); unsigned long ctl_base = ports->ctl; unsigned long cckctrl_port = ctl_base + 0xff0; @@ -272,13 +270,6 @@ static int scc_tune_chipset(ide_drive_t *drive, byte xferspeed) case XFER_UDMA_0: idx = speed - XFER_UDMA_0; break; - case XFER_PIO_4: - case XFER_PIO_3: - case XFER_PIO_2: - case XFER_PIO_1: - case XFER_PIO_0: - scc_tune_pio(drive, speed - XFER_PIO_0); - return ide_config_drive_speed(drive, speed); default: return 1; } @@ -317,7 +308,7 @@ static int scc_config_drive_for_dma(ide_drive_t *drive) return 0; if (ide_use_fast_pio(drive)) - scc_tuneproc(drive, 255); + ide_set_max_pio(drive); return -1; } @@ -718,7 +709,7 @@ static void __devinit init_hwif_scc(ide_hwif_t *hwif) hwif->dma_setup = scc_dma_setup; hwif->ide_dma_end = scc_ide_dma_end; hwif->speedproc = scc_tune_chipset; - hwif->tuneproc = scc_tuneproc; + hwif->set_pio_mode = scc_set_pio_mode; hwif->ide_dma_check = scc_config_drive_for_dma; hwif->ide_dma_test_irq = scc_dma_test_irq; hwif->udma_filter = scc_udma_filter; diff --git a/drivers/ide/pci/serverworks.c b/drivers/ide/pci/serverworks.c index 9fead2e7d4c..0351cf21042 100644 --- a/drivers/ide/pci/serverworks.c +++ b/drivers/ide/pci/serverworks.c @@ -145,7 +145,7 @@ static void svwks_tune_pio(ide_drive_t *drive, const u8 pio) } } -static int svwks_tune_chipset (ide_drive_t *drive, u8 xferspeed) +static int svwks_tune_chipset(ide_drive_t *drive, const u8 speed) { static const u8 udma_modes[] = { 0x00, 0x01, 0x02, 0x03, 0x04, 0x05 }; static const u8 dma_modes[] = { 0x77, 0x21, 0x20 }; @@ -153,16 +153,10 @@ static int svwks_tune_chipset (ide_drive_t *drive, u8 xferspeed) ide_hwif_t *hwif = HWIF(drive); struct pci_dev *dev = hwif->pci_dev; - u8 speed = ide_rate_filter(drive, xferspeed); u8 unit = (drive->select.b.unit & 0x01); u8 ultra_enable = 0, ultra_timing = 0, dma_timing = 0; - if (speed >= XFER_PIO_0 && speed <= XFER_PIO_4) { - svwks_tune_pio(drive, speed - XFER_PIO_0); - return ide_config_drive_speed(drive, speed); - } - /* If we are about to put a disk into UDMA mode we screwed up. Our code assumes we never _ever_ do this on an OSB4 */ @@ -203,9 +197,8 @@ static int svwks_tune_chipset (ide_drive_t *drive, u8 xferspeed) return (ide_config_drive_speed(drive, speed)); } -static void svwks_tune_drive (ide_drive_t *drive, u8 pio) +static void svwks_set_pio_mode(ide_drive_t *drive, const u8 pio) { - pio = ide_get_best_pio_mode(drive, pio, 4); svwks_tune_pio(drive, pio); (void)ide_config_drive_speed(drive, XFER_PIO_0 + pio); } @@ -218,7 +211,7 @@ static int svwks_config_drive_xfer_rate (ide_drive_t *drive) return 0; if (ide_use_fast_pio(drive)) - svwks_tune_drive(drive, 255); + ide_set_max_pio(drive); return -1; } @@ -390,7 +383,7 @@ static void __devinit init_hwif_svwks (ide_hwif_t *hwif) if (!hwif->irq) hwif->irq = hwif->channel ? 15 : 14; - hwif->tuneproc = &svwks_tune_drive; + hwif->set_pio_mode = &svwks_set_pio_mode; hwif->speedproc = &svwks_tune_chipset; hwif->udma_filter = &svwks_udma_filter; diff --git a/drivers/ide/pci/sgiioc4.c b/drivers/ide/pci/sgiioc4.c index 57145767c3d..c292e1de1d5 100644 --- a/drivers/ide/pci/sgiioc4.c +++ b/drivers/ide/pci/sgiioc4.c @@ -34,6 +34,8 @@ #include <linux/ide.h> +#define DRV_NAME "SGIIOC4" + /* IOC4 Specific Definitions */ #define IOC4_CMD_OFFSET 0x100 #define IOC4_CTRL_OFFSET 0x120 @@ -289,15 +291,26 @@ static void sgiioc4_dma_off_quietly(ide_drive_t *drive) drive->hwif->dma_host_off(drive); } +static int sgiioc4_speedproc(ide_drive_t *drive, const u8 speed) +{ + if (speed != XFER_MW_DMA_2) + return 1; + + return ide_config_drive_speed(drive, speed); +} + static int sgiioc4_ide_dma_check(ide_drive_t *drive) { - /* FIXME: check for available DMA modes */ - if (ide_config_drive_speed(drive, XFER_MW_DMA_2) != 0) { - printk(KERN_WARNING "%s: couldn't set MWDMA2 mode, " - "using PIO instead\n", drive->name); - return -1; - } else + if (ide_tune_dma(drive)) return 0; + + /* + * ->set_pio_mode is not implemented currently + * so this is just for the completness + */ + ide_set_max_pio(drive); + + return -1; } /* returns 1 if dma irq issued, 0 otherwise */ @@ -353,7 +366,7 @@ sgiioc4_INB(unsigned long port) } /* Creates a dma map for the scatter-gather list entries */ -static void __devinit +static int __devinit ide_dma_sgiioc4(ide_hwif_t * hwif, unsigned long dma_base) { void __iomem *virt_dma_base; @@ -369,7 +382,7 @@ ide_dma_sgiioc4(ide_hwif_t * hwif, unsigned long dma_base) "ALREADY in use\n", __FUNCTION__, hwif->name, (void *) dma_base, (void *) dma_base + num_ports - 1); - goto dma_alloc_failure; + return -1; } virt_dma_base = ioremap(dma_base, num_ports); @@ -395,7 +408,7 @@ ide_dma_sgiioc4(ide_hwif_t * hwif, unsigned long dma_base) if (pad) { ide_set_hwifdata(hwif, pad); - return; + return 0; } pci_free_consistent(hwif->pci_dev, @@ -413,10 +426,7 @@ dma_pci_alloc_failure: dma_remap_failure: release_mem_region(dma_base, num_ports); -dma_alloc_failure: - /* Disable DMA because we couldnot allocate any DMA maps */ - hwif->autodma = 0; - hwif->atapi_dma = 0; + return -1; } /* Initializes the IOC4 DMA Engine */ @@ -581,14 +591,11 @@ static void __devinit ide_init_sgiioc4(ide_hwif_t * hwif) { hwif->mmio = 1; - hwif->autodma = 1; hwif->atapi_dma = 1; - hwif->ultra_mask = 0x0; /* Disable Ultra DMA */ - hwif->mwdma_mask = 0x2; /* Multimode-2 DMA */ - hwif->swdma_mask = 0x2; + hwif->mwdma_mask = 0x04; hwif->pio_mask = 0x00; - hwif->tuneproc = NULL; /* Sets timing for PIO mode */ - hwif->speedproc = NULL; /* Sets timing for DMA &/or PIO modes */ + hwif->set_pio_mode = NULL; /* Sets timing for PIO mode */ + hwif->speedproc = &sgiioc4_speedproc; hwif->selectproc = NULL;/* Use the default routine to select drive */ hwif->reset_poll = NULL;/* No HBA specific reset_poll needed */ hwif->pre_reset = NULL; /* No HBA specific pre_set needed */ @@ -615,7 +622,7 @@ ide_init_sgiioc4(ide_hwif_t * hwif) } static int __devinit -sgiioc4_ide_setup_pci_device(struct pci_dev *dev, ide_pci_device_t * d) +sgiioc4_ide_setup_pci_device(struct pci_dev *dev) { unsigned long cmd_base, dma_base, irqport; unsigned long bar0, cmd_phys_base, ctl; @@ -632,7 +639,8 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev, ide_pci_device_t * d) break; } if (h == MAX_HWIFS) { - printk(KERN_ERR "%s: too many IDE interfaces, no room in table\n", d->name); + printk(KERN_ERR "%s: too many IDE interfaces, no room in table\n", + DRV_NAME); return -ENOMEM; } @@ -641,7 +649,7 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev, ide_pci_device_t * d) virt_base = ioremap(bar0, pci_resource_len(dev, 0)); if (virt_base == NULL) { printk(KERN_ERR "%s: Unable to remap BAR 0 address: 0x%lx\n", - d->name, bar0); + DRV_NAME, bar0); return -ENOMEM; } cmd_base = (unsigned long) virt_base + IOC4_CMD_OFFSET; @@ -672,7 +680,6 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev, ide_pci_device_t * d) hwif->chipset = ide_pci; hwif->pci_dev = dev; hwif->channel = 0; /* Single Channel chip */ - hwif->cds = (struct ide_pci_device_s *) d; hwif->gendev.parent = &dev->dev;/* setup proper ancestral information */ /* The IOC4 uses MMIO rather than Port IO. */ @@ -683,11 +690,14 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev, ide_pci_device_t * d) ide_init_sgiioc4(hwif); - if (dma_base) - ide_dma_sgiioc4(hwif, dma_base); - else + hwif->autodma = 0; + + if (dma_base && ide_dma_sgiioc4(hwif, dma_base) == 0) { + hwif->autodma = 1; + hwif->drives[1].autodma = hwif->drives[0].autodma = 1; + } else printk(KERN_INFO "%s: %s Bus-Master DMA disabled\n", - hwif->name, d->name); + hwif->name, DRV_NAME); if (probe_hwif_init(hwif)) return -EIO; @@ -699,7 +709,7 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev, ide_pci_device_t * d) } static unsigned int __devinit -pci_init_sgiioc4(struct pci_dev *dev, ide_pci_device_t * d) +pci_init_sgiioc4(struct pci_dev *dev) { unsigned int class_rev; int ret; @@ -707,30 +717,20 @@ pci_init_sgiioc4(struct pci_dev *dev, ide_pci_device_t * d) pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev); class_rev &= 0xff; printk(KERN_INFO "%s: IDE controller at PCI slot %s, revision %d\n", - d->name, pci_name(dev), class_rev); + DRV_NAME, pci_name(dev), class_rev); if (class_rev < IOC4_SUPPORTED_FIRMWARE_REV) { printk(KERN_ERR "Skipping %s IDE controller in slot %s: " - "firmware is obsolete - please upgrade to revision" - "46 or higher\n", d->name, pci_name(dev)); + "firmware is obsolete - please upgrade to " + "revision46 or higher\n", + DRV_NAME, pci_name(dev)); ret = -EAGAIN; goto out; } - ret = sgiioc4_ide_setup_pci_device(dev, d); + ret = sgiioc4_ide_setup_pci_device(dev); out: return ret; } -static ide_pci_device_t sgiioc4_chipset __devinitdata = { - /* Channel 0 */ - .name = "SGIIOC4", - .init_hwif = ide_init_sgiioc4, - .init_dma = ide_dma_sgiioc4, - .autodma = AUTODMA, - /* SGI IOC4 doesn't have enablebits. */ - .bootable = ON_BOARD, - .host_flags = IDE_HFLAG_SINGLE, -}; - int ioc4_ide_attach_one(struct ioc4_driver_data *idd) { @@ -740,7 +740,7 @@ ioc4_ide_attach_one(struct ioc4_driver_data *idd) if (idd->idd_variant == IOC4_VARIANT_PCI_RT) return 0; - return pci_init_sgiioc4(idd->idd_pdev, &sgiioc4_chipset); + return pci_init_sgiioc4(idd->idd_pdev); } static struct ioc4_submodule ioc4_ide_submodule = { diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c index 50f6d172ef7..5d1e5e52a04 100644 --- a/drivers/ide/pci/siimage.c +++ b/drivers/ide/pci/siimage.c @@ -1,5 +1,5 @@ /* - * linux/drivers/ide/pci/siimage.c Version 1.15 Jun 29 2007 + * linux/drivers/ide/pci/siimage.c Version 1.16 Jul 13 2007 * * Copyright (C) 2001-2002 Andre Hedrick <andre@linux-ide.org> * Copyright (C) 2003 Red Hat <alan@redhat.com> @@ -185,7 +185,12 @@ static void sil_tune_pio(ide_drive_t *drive, u8 pio) u16 speedp = 0; unsigned long addr = siimage_seldev(drive, 0x04); unsigned long tfaddr = siimage_selreg(hwif, 0x02); + unsigned long base = (unsigned long)hwif->hwif_data; u8 tf_pio = pio; + u8 addr_mask = hwif->channel ? (hwif->mmio ? 0xF4 : 0x84) + : (hwif->mmio ? 0xB4 : 0x80); + u8 mode = 0; + u8 unit = drive->select.b.unit; /* trim *taskfile* PIO to the slowest of the master/slave */ if (pair->present) { @@ -207,6 +212,11 @@ static void sil_tune_pio(ide_drive_t *drive, u8 pio) hwif->OUTW(hwif->INW(tfaddr-2)|0x200, tfaddr-2); else hwif->OUTW(hwif->INW(tfaddr-2)&~0x200, tfaddr-2); + + mode = hwif->INB(base + addr_mask); + mode &= ~(unit ? 0x30 : 0x03); + mode |= (unit ? 0x10 : 0x01); + hwif->OUTB(mode, base + addr_mask); } else { pci_write_config_word(hwif->pci_dev, addr, speedp); pci_write_config_word(hwif->pci_dev, tfaddr, speedt); @@ -216,12 +226,16 @@ static void sil_tune_pio(ide_drive_t *drive, u8 pio) if (pio > 2) speedp |= 0x200; pci_write_config_word(hwif->pci_dev, tfaddr-2, speedp); + + pci_read_config_byte(hwif->pci_dev, addr_mask, &mode); + mode &= ~(unit ? 0x30 : 0x03); + mode |= (unit ? 0x10 : 0x01); + pci_write_config_byte(hwif->pci_dev, addr_mask, mode); } } -static void sil_tuneproc(ide_drive_t *drive, u8 pio) +static void sil_set_pio_mode(ide_drive_t *drive, const u8 pio) { - pio = ide_get_best_pio_mode(drive, pio, 4); sil_tune_pio(drive, pio); (void)ide_config_drive_speed(drive, XFER_PIO_0 + pio); } @@ -229,14 +243,12 @@ static void sil_tuneproc(ide_drive_t *drive, u8 pio) /** * siimage_tune_chipset - set controller timings * @drive: Drive to set up - * @xferspeed: speed we want to achieve + * @speed: speed we want to achieve * - * Tune the SII chipset for the desired mode. If we can't achieve - * the desired mode then tune for a lower one, but ultimately - * make the thing work. + * Tune the SII chipset for the desired mode. */ - -static int siimage_tune_chipset (ide_drive_t *drive, byte xferspeed) + +static int siimage_tune_chipset(ide_drive_t *drive, const u8 speed) { u8 ultra6[] = { 0x0F, 0x0B, 0x07, 0x05, 0x03, 0x02, 0x01 }; u8 ultra5[] = { 0x0C, 0x07, 0x05, 0x04, 0x02, 0x01 }; @@ -245,7 +257,6 @@ static int siimage_tune_chipset (ide_drive_t *drive, byte xferspeed) ide_hwif_t *hwif = HWIF(drive); u16 ultra = 0, multi = 0; u8 mode = 0, unit = drive->select.b.unit; - u8 speed = ide_rate_filter(drive, xferspeed); unsigned long base = (unsigned long)hwif->hwif_data; u8 scsc = 0, addr_mask = ((hwif->channel) ? ((hwif->mmio) ? 0xF4 : 0x84) : @@ -273,14 +284,6 @@ static int siimage_tune_chipset (ide_drive_t *drive, byte xferspeed) scsc = is_sata(hwif) ? 1 : scsc; switch(speed) { - case XFER_PIO_4: - case XFER_PIO_3: - case XFER_PIO_2: - case XFER_PIO_1: - case XFER_PIO_0: - sil_tune_pio(drive, speed - XFER_PIO_0); - mode |= ((unit) ? 0x10 : 0x01); - break; case XFER_MW_DMA_2: case XFER_MW_DMA_1: case XFER_MW_DMA_0: @@ -331,7 +334,7 @@ static int siimage_config_drive_for_dma (ide_drive_t *drive) return 0; if (ide_use_fast_pio(drive)) - sil_tuneproc(drive, 255); + ide_set_max_pio(drive); return -1; } @@ -902,7 +905,7 @@ static void __devinit init_hwif_siimage(ide_hwif_t *hwif) hwif->resetproc = &siimage_reset; hwif->speedproc = &siimage_tune_chipset; - hwif->tuneproc = &sil_tuneproc; + hwif->set_pio_mode = &sil_set_pio_mode; hwif->reset_poll = &siimage_reset_poll; hwif->pre_reset = &siimage_pre_reset; hwif->udma_filter = &sil_udma_filter; diff --git a/drivers/ide/pci/sis5513.c b/drivers/ide/pci/sis5513.c index 26f24802d3e..3e18899de63 100644 --- a/drivers/ide/pci/sis5513.c +++ b/drivers/ide/pci/sis5513.c @@ -1,5 +1,5 @@ /* - * linux/drivers/ide/pci/sis5513.c Version 0.25 Jun 10, 2007 + * linux/drivers/ide/pci/sis5513.c Version 0.27 Jul 14, 2007 * * Copyright (C) 1999-2000 Andre Hedrick <andre@linux-ide.org> * Copyright (C) 2002 Lionel Bouton <Lionel.Bouton@inet6.fr>, Maintainer @@ -519,27 +519,18 @@ static void config_art_rwp_pio (ide_drive_t *drive, u8 pio) } } -static int sis5513_tune_drive(ide_drive_t *drive, u8 pio) +static void sis_set_pio_mode(ide_drive_t *drive, const u8 pio) { - pio = ide_get_best_pio_mode(drive, pio, 4); config_art_rwp_pio(drive, pio); - return ide_config_drive_speed(drive, XFER_PIO_0 + pio); + (void)ide_config_drive_speed(drive, XFER_PIO_0 + pio); } -static void sis5513_tuneproc(ide_drive_t *drive, u8 pio) -{ - (void)sis5513_tune_drive(drive, pio); -} - -static int sis5513_tune_chipset (ide_drive_t *drive, u8 xferspeed) +static int sis5513_tune_chipset(ide_drive_t *drive, const u8 speed) { ide_hwif_t *hwif = HWIF(drive); struct pci_dev *dev = hwif->pci_dev; - - u8 drive_pci, reg, speed; u32 regdw; - - speed = ide_rate_filter(drive, xferspeed); + u8 drive_pci, reg; /* See config_art_rwp_pio for drive pci config registers */ drive_pci = 0x40; @@ -582,9 +573,6 @@ static int sis5513_tune_chipset (ide_drive_t *drive, u8 xferspeed) regdw |= (unsigned long)cycle_time_value[ATA_133][speed-XFER_UDMA_0] << 4; regdw |= (unsigned long)cvs_time_value[ATA_133][speed-XFER_UDMA_0] << 8; } else { - /* if ATA133 disable, we should not set speed above UDMA5 */ - if (speed > XFER_UDMA_5) - speed = XFER_UDMA_5; regdw |= (unsigned long)cycle_time_value[ATA_100][speed-XFER_UDMA_0] << 4; regdw |= (unsigned long)cvs_time_value[ATA_100][speed-XFER_UDMA_0] << 8; } @@ -608,12 +596,6 @@ static int sis5513_tune_chipset (ide_drive_t *drive, u8 xferspeed) case XFER_SW_DMA_1: case XFER_SW_DMA_0: break; - case XFER_PIO_4: - case XFER_PIO_3: - case XFER_PIO_2: - case XFER_PIO_1: - case XFER_PIO_0: - return sis5513_tune_drive(drive, speed - XFER_PIO_0); default: BUG(); break; @@ -627,7 +609,7 @@ static int sis5513_config_xfer_rate(ide_drive_t *drive) /* * TODO: always set PIO mode and remove this */ - sis5513_tuneproc(drive, 255); + ide_set_max_pio(drive); drive->init_speed = 0; @@ -635,11 +617,25 @@ static int sis5513_config_xfer_rate(ide_drive_t *drive) return 0; if (ide_use_fast_pio(drive)) - sis5513_tuneproc(drive, 255); + ide_set_max_pio(drive); return -1; } +static u8 sis5513_ata133_udma_filter(ide_drive_t *drive) +{ + struct pci_dev *dev = drive->hwif->pci_dev; + int drive_pci; + u32 reg54 = 0, regdw = 0; + + pci_read_config_dword(dev, 0x54, ®54); + drive_pci = ((reg54 & 0x40000000) ? 0x70 : 0x40) + drive->dn * 4; + pci_read_config_dword(dev, drive_pci, ®dw); + + /* if ATA133 disable, we should not set speed above UDMA5 */ + return (regdw & 0x08) ? ATA_UDMA6 : ATA_UDMA5; +} + /* Chip detection and general config */ static unsigned int __devinit init_chipset_sis5513 (struct pci_dev *dev, const char *name) { @@ -844,9 +840,12 @@ static void __devinit init_hwif_sis5513 (ide_hwif_t *hwif) if (!hwif->irq) hwif->irq = hwif->channel ? 15 : 14; - hwif->tuneproc = &sis5513_tuneproc; + hwif->set_pio_mode = &sis_set_pio_mode; hwif->speedproc = &sis5513_tune_chipset; + if (chipset_family >= ATA_133) + hwif->udma_filter = sis5513_ata133_udma_filter; + if (!(hwif->dma_base)) { hwif->drives[0].autotune = 1; hwif->drives[1].autotune = 1; diff --git a/drivers/ide/pci/sl82c105.c b/drivers/ide/pci/sl82c105.c index 0947cab0059..f492318ba79 100644 --- a/drivers/ide/pci/sl82c105.c +++ b/drivers/ide/pci/sl82c105.c @@ -75,16 +75,12 @@ static unsigned int get_pio_timings(ide_drive_t *drive, u8 pio) /* * Configure the chipset for PIO mode. */ -static u8 sl82c105_tune_pio(ide_drive_t *drive, u8 pio) +static void sl82c105_tune_pio(ide_drive_t *drive, const u8 pio) { struct pci_dev *dev = HWIF(drive)->pci_dev; int reg = 0x44 + drive->dn * 4; u16 drv_ctrl; - DBG(("sl82c105_tune_pio(drive:%s, pio:%u)\n", drive->name, pio)); - - pio = ide_get_best_pio_mode(drive, pio, 5); - drv_ctrl = get_pio_timings(drive, pio); /* @@ -106,14 +102,12 @@ static u8 sl82c105_tune_pio(ide_drive_t *drive, u8 pio) printk(KERN_DEBUG "%s: selected %s (%dns) (%04X)\n", drive->name, ide_xfer_verbose(pio + XFER_PIO_0), ide_pio_cycle_time(drive, pio), drv_ctrl); - - return pio; } /* * Configure the drive and chipset for a new transfer speed. */ -static int sl82c105_tune_chipset(ide_drive_t *drive, u8 speed) +static int sl82c105_tune_chipset(ide_drive_t *drive, const u8 speed) { static u16 mwdma_timings[] = {0x0707, 0x0201, 0x0200}; u16 drv_ctrl; @@ -121,8 +115,6 @@ static int sl82c105_tune_chipset(ide_drive_t *drive, u8 speed) DBG(("sl82c105_tune_chipset(drive:%s, speed:%s)\n", drive->name, ide_xfer_verbose(speed))); - speed = ide_rate_filter(drive, speed); - switch (speed) { case XFER_MW_DMA_2: case XFER_MW_DMA_1: @@ -147,14 +139,6 @@ static int sl82c105_tune_chipset(ide_drive_t *drive, u8 speed) pci_write_config_word(dev, reg, drv_ctrl); } break; - case XFER_PIO_5: - case XFER_PIO_4: - case XFER_PIO_3: - case XFER_PIO_2: - case XFER_PIO_1: - case XFER_PIO_0: - (void) sl82c105_tune_pio(drive, speed - XFER_PIO_0); - break; default: return -1; } @@ -327,11 +311,10 @@ static void sl82c105_resetproc(ide_drive_t *drive) * We only deal with PIO mode here - DMA mode 'using_dma' is not * initialised at the point that this function is called. */ -static void sl82c105_tune_drive(ide_drive_t *drive, u8 pio) +static void sl82c105_set_pio_mode(ide_drive_t *drive, const u8 pio) { - DBG(("sl82c105_tune_drive(drive:%s, pio:%u)\n", drive->name, pio)); + sl82c105_tune_pio(drive, pio); - pio = sl82c105_tune_pio(drive, pio); (void) ide_config_drive_speed(drive, XFER_PIO_0 + pio); } @@ -399,7 +382,7 @@ static void __devinit init_hwif_sl82c105(ide_hwif_t *hwif) DBG(("init_hwif_sl82c105(hwif: ide%d)\n", hwif->index)); - hwif->tuneproc = &sl82c105_tune_drive; + hwif->set_pio_mode = &sl82c105_set_pio_mode; hwif->speedproc = &sl82c105_tune_chipset; hwif->selectproc = &sl82c105_selectproc; hwif->resetproc = &sl82c105_resetproc; diff --git a/drivers/ide/pci/slc90e66.c b/drivers/ide/pci/slc90e66.c index 628b0664f57..ae8e9132457 100644 --- a/drivers/ide/pci/slc90e66.c +++ b/drivers/ide/pci/slc90e66.c @@ -1,5 +1,5 @@ /* - * linux/drivers/ide/pci/slc90e66.c Version 0.15 Jul 6, 2007 + * linux/drivers/ide/pci/slc90e66.c Version 0.16 Jul 14, 2007 * * Copyright (C) 2000-2002 Andre Hedrick <andre@linux-ide.org> * Copyright (C) 2006-2007 MontaVista Software, Inc. <source@mvista.com> @@ -95,19 +95,17 @@ static void slc90e66_tune_pio (ide_drive_t *drive, u8 pio) spin_unlock_irqrestore(&ide_lock, flags); } -static void slc90e66_tune_drive (ide_drive_t *drive, u8 pio) +static void slc90e66_set_pio_mode(ide_drive_t *drive, const u8 pio) { - pio = ide_get_best_pio_mode(drive, pio, 4); slc90e66_tune_pio(drive, pio); (void) ide_config_drive_speed(drive, XFER_PIO_0 + pio); } -static int slc90e66_tune_chipset (ide_drive_t *drive, u8 xferspeed) +static int slc90e66_tune_chipset(ide_drive_t *drive, const u8 speed) { ide_hwif_t *hwif = HWIF(drive); struct pci_dev *dev = hwif->pci_dev; u8 maslave = hwif->channel ? 0x42 : 0x40; - u8 speed = ide_rate_filter(drive, xferspeed); int sitre = 0, a_speed = 7 << (drive->dn * 4); int u_speed = 0, u_flag = 1 << drive->dn; u16 reg4042, reg44, reg48, reg4a; @@ -127,11 +125,6 @@ static int slc90e66_tune_chipset (ide_drive_t *drive, u8 xferspeed) case XFER_MW_DMA_2: case XFER_MW_DMA_1: case XFER_SW_DMA_2: break; - case XFER_PIO_4: - case XFER_PIO_3: - case XFER_PIO_2: - case XFER_PIO_1: - case XFER_PIO_0: break; default: return -1; } @@ -151,10 +144,7 @@ static int slc90e66_tune_chipset (ide_drive_t *drive, u8 xferspeed) pci_write_config_word(dev, 0x4a, reg4a & ~a_speed); } - if (speed > XFER_PIO_4) - slc90e66_tune_pio(drive, slc90e66_dma_2_pio(speed)); - else - slc90e66_tune_pio(drive, speed - XFER_PIO_0); + slc90e66_tune_pio(drive, slc90e66_dma_2_pio(speed)); return ide_config_drive_speed(drive, speed); } @@ -167,7 +157,7 @@ static int slc90e66_config_drive_xfer_rate (ide_drive_t *drive) return 0; if (ide_use_fast_pio(drive)) - slc90e66_tune_drive(drive, 255); + ide_set_max_pio(drive); return -1; } @@ -183,7 +173,7 @@ static void __devinit init_hwif_slc90e66 (ide_hwif_t *hwif) hwif->irq = hwif->channel ? 15 : 14; hwif->speedproc = &slc90e66_tune_chipset; - hwif->tuneproc = &slc90e66_tune_drive; + hwif->set_pio_mode = &slc90e66_set_pio_mode; pci_read_config_byte(hwif->pci_dev, 0x47, ®47); diff --git a/drivers/ide/pci/tc86c001.c b/drivers/ide/pci/tc86c001.c index ec79bacc30c..e23b9cfb6eb 100644 --- a/drivers/ide/pci/tc86c001.c +++ b/drivers/ide/pci/tc86c001.c @@ -13,14 +13,12 @@ #include <linux/pci.h> #include <linux/ide.h> -static int tc86c001_tune_chipset(ide_drive_t *drive, u8 speed) +static int tc86c001_tune_chipset(ide_drive_t *drive, const u8 speed) { ide_hwif_t *hwif = HWIF(drive); unsigned long scr_port = hwif->config_data + (drive->dn ? 0x02 : 0x00); u16 mode, scr = hwif->INW(scr_port); - speed = ide_rate_filter(drive, speed); - switch (speed) { case XFER_UDMA_4: mode = 0x00c0; break; case XFER_UDMA_3: mode = 0x00b0; break; @@ -45,9 +43,8 @@ static int tc86c001_tune_chipset(ide_drive_t *drive, u8 speed) return ide_config_drive_speed(drive, speed); } -static void tc86c001_tune_drive(ide_drive_t *drive, u8 pio) +static void tc86c001_set_pio_mode(ide_drive_t *drive, const u8 pio) { - pio = ide_get_best_pio_mode(drive, pio, 4); (void) tc86c001_tune_chipset(drive, XFER_PIO_0 + pio); } @@ -173,7 +170,7 @@ static int tc86c001_config_drive_xfer_rate(ide_drive_t *drive) return 0; if (ide_use_fast_pio(drive)) - tc86c001_tune_drive(drive, 255); + ide_set_max_pio(drive); return -1; } @@ -195,7 +192,7 @@ static void __devinit init_hwif_tc86c001(ide_hwif_t *hwif) /* Store the system control register base for convenience... */ hwif->config_data = sc_base; - hwif->tuneproc = &tc86c001_tune_drive; + hwif->set_pio_mode = &tc86c001_set_pio_mode; hwif->speedproc = &tc86c001_tune_chipset; hwif->busproc = &tc86c001_busproc; diff --git a/drivers/ide/pci/triflex.c b/drivers/ide/pci/triflex.c index 098692a6d61..c3ff066eea5 100644 --- a/drivers/ide/pci/triflex.c +++ b/drivers/ide/pci/triflex.c @@ -40,7 +40,7 @@ #include <linux/ide.h> #include <linux/init.h> -static int triflex_tune_chipset(ide_drive_t *drive, u8 xferspeed) +static int triflex_tune_chipset(ide_drive_t *drive, const u8 speed) { ide_hwif_t *hwif = HWIF(drive); struct pci_dev *dev = hwif->pci_dev; @@ -48,7 +48,6 @@ static int triflex_tune_chipset(ide_drive_t *drive, u8 xferspeed) u16 timing = 0; u32 triflex_timings = 0; u8 unit = (drive->select.b.unit & 0x01); - u8 speed = ide_rate_filter(drive, xferspeed); pci_read_config_dword(dev, channel_offset, &triflex_timings); @@ -94,10 +93,9 @@ static int triflex_tune_chipset(ide_drive_t *drive, u8 xferspeed) return (ide_config_drive_speed(drive, speed)); } -static void triflex_tune_drive(ide_drive_t *drive, u8 pio) +static void triflex_set_pio_mode(ide_drive_t *drive, const u8 pio) { - int use_pio = ide_get_best_pio_mode(drive, pio, 4); - (void) triflex_tune_chipset(drive, (XFER_PIO_0 + use_pio)); + (void)triflex_tune_chipset(drive, XFER_PIO_0 + pio); } static int triflex_config_drive_xfer_rate(ide_drive_t *drive) @@ -105,14 +103,14 @@ static int triflex_config_drive_xfer_rate(ide_drive_t *drive) if (ide_tune_dma(drive)) return 0; - triflex_tune_drive(drive, 255); + ide_set_max_pio(drive); return -1; } static void __devinit init_hwif_triflex(ide_hwif_t *hwif) { - hwif->tuneproc = &triflex_tune_drive; + hwif->set_pio_mode = &triflex_set_pio_mode; hwif->speedproc = &triflex_tune_chipset; if (hwif->dma_base == 0) diff --git a/drivers/ide/pci/via82cxxx.c b/drivers/ide/pci/via82cxxx.c index a7be7795e6a..378feb491ec 100644 --- a/drivers/ide/pci/via82cxxx.c +++ b/drivers/ide/pci/via82cxxx.c @@ -1,6 +1,6 @@ /* * - * Version 3.47 + * Version 3.48 * * VIA IDE driver for Linux. Supported southbridges: * @@ -158,7 +158,7 @@ static void via_set_speed(ide_hwif_t *hwif, u8 dn, struct ide_timing *timing) * by upper layers. */ -static int via_set_drive(ide_drive_t *drive, u8 speed) +static int via_set_drive(ide_drive_t *drive, const u8 speed) { ide_drive_t *peer = HWIF(drive)->drives + (~drive->dn & 1); struct via82cxxx_dev *vdev = pci_get_drvdata(drive->hwif->pci_dev); @@ -195,19 +195,16 @@ static int via_set_drive(ide_drive_t *drive, u8 speed) } /** - * via82cxxx_tune_drive - PIO setup - * @drive: drive to set up - * @pio: mode to use (255 for 'best possible') + * via_set_pio_mode - PIO setup + * @drive: drive + * @pio: PIO mode number * * A callback from the upper layers for PIO-only tuning. */ -static void via82cxxx_tune_drive(ide_drive_t *drive, u8 pio) +static void via_set_pio_mode(ide_drive_t *drive, const u8 pio) { - if (pio == 255) - pio = ide_get_best_pio_mode(drive, 255, 5); - - via_set_drive(drive, XFER_PIO_0 + min_t(u8, pio, 5)); + via_set_drive(drive, XFER_PIO_0 + pio); } /** @@ -220,18 +217,11 @@ static void via82cxxx_tune_drive(ide_drive_t *drive, u8 pio) static int via82cxxx_ide_dma_check (ide_drive_t *drive) { - u8 speed = ide_max_dma_mode(drive); - - if (speed == 0) { - via82cxxx_tune_drive(drive, 255); - return -1; - } - - via_set_drive(drive, speed); - - if (drive->autodma) + if (ide_tune_dma(drive)) return 0; + ide_set_max_pio(drive); + return -1; } @@ -419,7 +409,7 @@ static unsigned int __devinit init_chipset_via82cxxx(struct pci_dev *dev, const * Cable special cases */ -static struct dmi_system_id cable_dmi_table[] = { +static const struct dmi_system_id cable_dmi_table[] = { { .ident = "Acer Ferrari 3400", .matches = { @@ -465,7 +455,7 @@ static void __devinit init_hwif_via82cxxx(ide_hwif_t *hwif) hwif->autodma = 0; - hwif->tuneproc = &via82cxxx_tune_drive; + hwif->set_pio_mode = &via_set_pio_mode; hwif->speedproc = &via_set_drive; |