diff options
Diffstat (limited to 'drivers/ide/pci')
| -rw-r--r-- | drivers/ide/pci/alim15x3.c | 16 | ||||
| -rw-r--r-- | drivers/ide/pci/atiixp.c | 19 | ||||
| -rw-r--r-- | drivers/ide/pci/hpt366.c | 886 | ||||
| -rw-r--r-- | drivers/ide/pci/pdc202xx_new.c | 503 | ||||
| -rw-r--r-- | drivers/ide/pci/piix.c | 70 | ||||
| -rw-r--r-- | drivers/ide/pci/sis5513.c | 3 | ||||
| -rw-r--r-- | drivers/ide/pci/sl82c105.c | 31 | ||||
| -rw-r--r-- | drivers/ide/pci/slc90e66.c | 20 | ||||
| -rw-r--r-- | drivers/ide/pci/via82cxxx.c | 163 |
9 files changed, 917 insertions, 794 deletions
diff --git a/drivers/ide/pci/alim15x3.c b/drivers/ide/pci/alim15x3.c index d419e4bb54f..89109be5162 100644 --- a/drivers/ide/pci/alim15x3.c +++ b/drivers/ide/pci/alim15x3.c @@ -586,11 +586,11 @@ static unsigned int __devinit init_chipset_ali15x3 (struct pci_dev *dev, const c { unsigned long flags; u8 tmpbyte; - struct pci_dev *north = pci_find_slot(0, PCI_DEVFN(0,0)); + struct pci_dev *north = pci_get_slot(dev->bus, PCI_DEVFN(0,0)); pci_read_config_byte(dev, PCI_REVISION_ID, &m5229_revision); - isa_dev = pci_find_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL); + isa_dev = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL); #if defined(DISPLAY_ALI_TIMINGS) && defined(CONFIG_PROC_FS) if (!ali_proc) { @@ -613,8 +613,7 @@ static unsigned int __devinit init_chipset_ali15x3 (struct pci_dev *dev, const c * clear bit 7 */ pci_write_config_byte(dev, 0x4b, tmpbyte & 0x7F); - local_irq_restore(flags); - return 0; + goto out; } /* @@ -637,10 +636,8 @@ static unsigned int __devinit init_chipset_ali15x3 (struct pci_dev *dev, const c * box without a device at 0:0.0. The ALi bridge will be at * 0:0.0 so if we didn't find one we know what is cooking. */ - if (north && north->vendor != PCI_VENDOR_ID_AL) { - local_irq_restore(flags); - return 0; - } + if (north && north->vendor != PCI_VENDOR_ID_AL) + goto out; if (m5229_revision < 0xC5 && isa_dev) { @@ -661,6 +658,9 @@ static unsigned int __devinit init_chipset_ali15x3 (struct pci_dev *dev, const c pci_write_config_byte(isa_dev, 0x79, tmpbyte | 0x02); } } +out: + pci_dev_put(north); + pci_dev_put(isa_dev); local_irq_restore(flags); return 0; } diff --git a/drivers/ide/pci/atiixp.c b/drivers/ide/pci/atiixp.c index d55b938b1ae..524e65de439 100644 --- a/drivers/ide/pci/atiixp.c +++ b/drivers/ide/pci/atiixp.c @@ -46,6 +46,8 @@ static atiixp_ide_timing mdma_timing[] = { static int save_mdma_mode[4]; +static DEFINE_SPINLOCK(atiixp_lock); + /** * atiixp_ratemask - compute rate mask for ATIIXP IDE * @drive: IDE drive to compute for @@ -105,7 +107,7 @@ static int atiixp_ide_dma_host_on(ide_drive_t *drive) unsigned long flags; u16 tmp16; - spin_lock_irqsave(&ide_lock, flags); + spin_lock_irqsave(&atiixp_lock, flags); pci_read_config_word(dev, ATIIXP_IDE_UDMA_CONTROL, &tmp16); if (save_mdma_mode[drive->dn]) @@ -114,7 +116,7 @@ static int atiixp_ide_dma_host_on(ide_drive_t *drive) tmp16 |= (1 << drive->dn); pci_write_config_word(dev, ATIIXP_IDE_UDMA_CONTROL, tmp16); - spin_unlock_irqrestore(&ide_lock, flags); + spin_unlock_irqrestore(&atiixp_lock, flags); return __ide_dma_host_on(drive); } @@ -125,13 +127,13 @@ static int atiixp_ide_dma_host_off(ide_drive_t *drive) unsigned long flags; u16 tmp16; - spin_lock_irqsave(&ide_lock, flags); + spin_lock_irqsave(&atiixp_lock, flags); pci_read_config_word(dev, ATIIXP_IDE_UDMA_CONTROL, &tmp16); tmp16 &= ~(1 << drive->dn); pci_write_config_word(dev, ATIIXP_IDE_UDMA_CONTROL, tmp16); - spin_unlock_irqrestore(&ide_lock, flags); + spin_unlock_irqrestore(&atiixp_lock, flags); return __ide_dma_host_off(drive); } @@ -152,7 +154,7 @@ static void atiixp_tuneproc(ide_drive_t *drive, u8 pio) u32 pio_timing_data; u16 pio_mode_data; - spin_lock_irqsave(&ide_lock, flags); + spin_lock_irqsave(&atiixp_lock, flags); pci_read_config_word(dev, ATIIXP_IDE_PIO_MODE, &pio_mode_data); pio_mode_data &= ~(0x07 << (drive->dn * 4)); @@ -165,7 +167,7 @@ static void atiixp_tuneproc(ide_drive_t *drive, u8 pio) (pio_timing[pio].command_width << (timing_shift + 4)); pci_write_config_dword(dev, ATIIXP_IDE_PIO_TIMING, pio_timing_data); - spin_unlock_irqrestore(&ide_lock, flags); + spin_unlock_irqrestore(&atiixp_lock, flags); } /** @@ -189,7 +191,7 @@ static int atiixp_speedproc(ide_drive_t *drive, u8 xferspeed) speed = ide_rate_filter(atiixp_ratemask(drive), xferspeed); - spin_lock_irqsave(&ide_lock, flags); + spin_lock_irqsave(&atiixp_lock, flags); save_mdma_mode[drive->dn] = 0; if (speed >= XFER_UDMA_0) { @@ -208,7 +210,7 @@ static int atiixp_speedproc(ide_drive_t *drive, u8 xferspeed) } } - spin_unlock_irqrestore(&ide_lock, flags); + spin_unlock_irqrestore(&atiixp_lock, flags); if (speed >= XFER_SW_DMA_0) pio = atiixp_dma_2_pio(speed); @@ -368,7 +370,6 @@ static struct pci_device_id atiixp_pci_tbl[] = { { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP300_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, - { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_SATA, PCI_ANY_ID, PCI_ANY_ID, (PCI_CLASS_STORAGE_IDE<<8)|0x8a, 0xffff05, 1}, { 0, }, }; MODULE_DEVICE_TABLE(pci, atiixp_pci_tbl); diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c index e993a51f250..08119da06d5 100644 --- a/drivers/ide/pci/hpt366.c +++ b/drivers/ide/pci/hpt366.c @@ -4,6 +4,7 @@ * Copyright (C) 1999-2003 Andre Hedrick <andre@linux-ide.org> * Portions Copyright (C) 2001 Sun Microsystems, Inc. * Portions Copyright (C) 2003 Red Hat Inc + * Portions Copyright (C) 2005-2006 MontaVista Software, Inc. * * Thanks to HighPoint Technologies for their assistance, and hardware. * Special Thanks to Jon Burchmore in SanDiego for the deep pockets, his @@ -11,9 +12,11 @@ * development and support. * * - * Highpoint have their own driver (source except for the raid part) - * available from http://www.highpoint-tech.com/hpt3xx-opensource-v131.tgz - * This may be useful to anyone wanting to work on the mainstream hpt IDE. + * HighPoint has its own drivers (open source except for the RAID part) + * available from http://www.highpoint-tech.com/BIOS%20+%20Driver/. + * This may be useful to anyone wanting to work on this driver, however do not + * trust them too much since the code tends to become less and less meaningful + * as the time passes... :-/ * * Note that final HPT370 support was done by force extraction of GPL. * @@ -52,6 +55,29 @@ * keeping me sane. * Alan Cox <alan@redhat.com> * + * - fix the clock turnaround code: it was writing to the wrong ports when + * called for the secondary channel, caching the current clock mode per- + * channel caused the cached register value to get out of sync with the + * actual one, the channels weren't serialized, the turnaround shouldn't + * be done on 66 MHz PCI bus + * - avoid calibrating PLL twice as the second time results in a wrong PCI + * frequency and thus in the wrong timings for the secondary channel + * - disable UltraATA/133 for HPT372 by default (50 MHz DPLL clock do not + * allow for this speed anyway) + * - add support for HPT302N and HPT371N clocking (the same as for HPT372N) + * - HPT371/N are single channel chips, so avoid touching the primary channel + * which exists only virtually (there's no pins for it) + * - fix/remove bad/unused timing tables and use one set of tables for the whole + * HPT37x chip family; save space by introducing the separate transfer mode + * table in which the mode lookup is done + * - use f_CNT value saved by the HighPoint BIOS as reading it directly gives + * the wrong PCI frequency since DPLL has already been calibrated by BIOS + * - fix the hotswap code: it caused RESET- to glitch when tristating the bus, + * and for HPT36x the obsolete HDIO_TRISTATE_HWIF handler was called instead + * - pass to init_chipset() handlers a copy of the IDE PCI device structure as + * they tamper with its fields + * <source@mvista.com> + * */ @@ -76,8 +102,8 @@ /* various tuning parameters */ #define HPT_RESET_STATE_ENGINE -#undef HPT_DELAY_INTERRUPT -#undef HPT_SERIALIZE_IO +#undef HPT_DELAY_INTERRUPT +#define HPT_SERIALIZE_IO 0 static const char *quirk_drives[] = { "QUANTUM FIREBALLlct08 08", @@ -141,305 +167,175 @@ static const char *bad_ata33[] = { NULL }; -struct chipset_bus_clock_list_entry { - u8 xfer_speed; - unsigned int chipset_settings; +static u8 xfer_speeds[] = { + XFER_UDMA_6, + XFER_UDMA_5, + XFER_UDMA_4, + XFER_UDMA_3, + XFER_UDMA_2, + XFER_UDMA_1, + XFER_UDMA_0, + + XFER_MW_DMA_2, + XFER_MW_DMA_1, + XFER_MW_DMA_0, + + XFER_PIO_4, + XFER_PIO_3, + XFER_PIO_2, + XFER_PIO_1, + XFER_PIO_0 }; -/* key for bus clock timings - * bit - * 0:3 data_high_time. inactive time of DIOW_/DIOR_ for PIO and MW - * DMA. cycles = value + 1 - * 4:8 data_low_time. active time of DIOW_/DIOR_ for PIO and MW - * DMA. cycles = value + 1 - * 9:12 cmd_high_time. inactive time of DIOW_/DIOR_ during task file - * register access. - * 13:17 cmd_low_time. active time of DIOW_/DIOR_ during task file - * register access. - * 18:21 udma_cycle_time. clock freq and clock cycles for UDMA xfer. - * during task file register access. - * 22:24 pre_high_time. time to initialize 1st cycle for PIO and MW DMA - * xfer. - * 25:27 cmd_pre_high_time. time to initialize 1st PIO cycle for task - * register access. - * 28 UDMA enable - * 29 DMA enable - * 30 PIO_MST enable. if set, the chip is in bus master mode during - * PIO. - * 31 FIFO enable. +/* Key for bus clock timings + * 36x 37x + * bits bits + * 0:3 0:3 data_high_time. Inactive time of DIOW_/DIOR_ for PIO and MW DMA. + * cycles = value + 1 + * 4:7 4:8 data_low_time. Active time of DIOW_/DIOR_ for PIO and MW DMA. + * cycles = value + 1 + * 8:11 9:12 cmd_high_time. Inactive time of DIOW_/DIOR_ during task file + * register access. + * 12:15 13:17 cmd_low_time. Active time of DIOW_/DIOR_ during task file + * register access. + * 16:18 18:20 udma_cycle_time. Clock cycles for UDMA xfer. + * - 21 CLK frequency: 0=ATA clock, 1=dual ATA clock. + * 19:21 22:24 pre_high_time. Time to initialize the 1st cycle for PIO and + * MW DMA xfer. + * 22:24 25:27 cmd_pre_high_time. Time to initialize the 1st PIO cycle for + * task file register access. + * 28 28 UDMA enable. + * 29 29 DMA enable. + * 30 30 PIO MST enable. If set, the chip is in bus master mode during + * PIO xfer. + * 31 31 FIFO enable. */ -static struct chipset_bus_clock_list_entry forty_base_hpt366[] = { - { XFER_UDMA_4, 0x900fd943 }, - { XFER_UDMA_3, 0x900ad943 }, - { XFER_UDMA_2, 0x900bd943 }, - { XFER_UDMA_1, 0x9008d943 }, - { XFER_UDMA_0, 0x9008d943 }, - - { XFER_MW_DMA_2, 0xa008d943 }, - { XFER_MW_DMA_1, 0xa010d955 }, - { XFER_MW_DMA_0, 0xa010d9fc }, - - { XFER_PIO_4, 0xc008d963 }, - { XFER_PIO_3, 0xc010d974 }, - { XFER_PIO_2, 0xc010d997 }, - { XFER_PIO_1, 0xc010d9c7 }, - { XFER_PIO_0, 0xc018d9d9 }, - { 0, 0x0120d9d9 } -}; - -static struct chipset_bus_clock_list_entry thirty_three_base_hpt366[] = { - { XFER_UDMA_4, 0x90c9a731 }, - { XFER_UDMA_3, 0x90cfa731 }, - { XFER_UDMA_2, 0x90caa731 }, - { XFER_UDMA_1, 0x90cba731 }, - { XFER_UDMA_0, 0x90c8a731 }, - - { XFER_MW_DMA_2, 0xa0c8a731 }, - { XFER_MW_DMA_1, 0xa0c8a732 }, /* 0xa0c8a733 */ - { XFER_MW_DMA_0, 0xa0c8a797 }, - - { XFER_PIO_4, 0xc0c8a731 }, - { XFER_PIO_3, 0xc0c8a742 }, - { XFER_PIO_2, 0xc0d0a753 }, - { XFER_PIO_1, 0xc0d0a7a3 }, /* 0xc0d0a793 */ - { XFER_PIO_0, 0xc0d0a7aa }, /* 0xc0d0a7a7 */ - { 0, 0x0120a7a7 } -}; - -static struct chipset_bus_clock_list_entry twenty_five_base_hpt366[] = { - { XFER_UDMA_4, 0x90c98521 }, - { XFER_UDMA_3, 0x90cf8521 }, - { XFER_UDMA_2, 0x90cf8521 }, - { XFER_UDMA_1, 0x90cb8521 }, - { XFER_UDMA_0, 0x90cb8521 }, - - { XFER_MW_DMA_2, 0xa0ca8521 }, - { XFER_MW_DMA_1, 0xa0ca8532 }, - { XFER_MW_DMA_0, 0xa0ca8575 }, - - { XFER_PIO_4, 0xc0ca8521 }, - { XFER_PIO_3, 0xc0ca8532 }, - { XFER_PIO_2, 0xc0ca8542 }, - { XFER_PIO_1, 0xc0d08572 }, - { XFER_PIO_0, 0xc0d08585 }, - { 0, 0x01208585 } -}; - -/* from highpoint documentation. these are old values */ -static struct chipset_bus_clock_list_entry thirty_three_base_hpt370[] = { -/* { XFER_UDMA_5, 0x1A85F442, 0x16454e31 }, */ - { XFER_UDMA_5, 0x16454e31 }, - { XFER_UDMA_4, 0x16454e31 }, - { XFER_UDMA_3, 0x166d4e31 }, - { XFER_UDMA_2, 0x16494e31 }, - { XFER_UDMA_1, 0x164d4e31 }, - { XFER_UDMA_0, 0x16514e31 }, - - { XFER_MW_DMA_2, 0x26514e21 }, - { XFER_MW_DMA_1, 0x26514e33 }, - { XFER_MW_DMA_0, 0x26514e97 }, - - { XFER_PIO_4, 0x06514e21 }, - { XFER_PIO_3, 0x06514e22 }, - { XFER_PIO_2, 0x06514e33 }, - { XFER_PIO_1, 0x06914e43 }, - { XFER_PIO_0, 0x06914e57 }, - { 0, 0x06514e57 } -}; - -static struct chipset_bus_clock_list_entry sixty_six_base_hpt370[] = { - { XFER_UDMA_5, 0x14846231 }, - { XFER_UDMA_4, 0x14886231 }, - { XFER_UDMA_3, 0x148c6231 }, - { XFER_UDMA_2, 0x148c6231 }, - { XFER_UDMA_1, 0x14906231 }, - { XFER_UDMA_0, 0x14986231 }, - - { XFER_MW_DMA_2, 0x26514e21 }, - { XFER_MW_DMA_1, 0x26514e33 }, - { XFER_MW_DMA_0, 0x26514e97 }, - - { XFER_PIO_4, 0x06514e21 }, - { XFER_PIO_3, 0x06514e22 }, - { XFER_PIO_2, 0x06514e33 }, - { XFER_PIO_1, 0x06914e43 }, - { XFER_PIO_0, 0x06914e57 }, - { 0, 0x06514e57 } -}; - -/* these are the current (4 sep 2001) timings from highpoint */ -static struct chipset_bus_clock_list_entry thirty_three_base_hpt370a[] = { - { XFER_UDMA_5, 0x12446231 }, - { XFER_UDMA_4, 0x12446231 }, - { XFER_UDMA_3, 0x126c6231 }, - { XFER_UDMA_2, 0x12486231 }, - { XFER_UDMA_1, 0x124c6233 }, - { XFER_UDMA_0, 0x12506297 }, - - { XFER_MW_DMA_2, 0x22406c31 }, - { XFER_MW_DMA_1, 0x22406c33 }, - { XFER_MW_DMA_0, 0x22406c97 }, - - { XFER_PIO_4, 0x06414e31 }, - { XFER_PIO_3, 0x06414e42 }, - { XFER_PIO_2, 0x06414e53 }, - { XFER_PIO_1, 0x06814e93 }, - { XFER_PIO_0, 0x06814ea7 }, - { 0, 0x06814ea7 } -}; - -/* 2x 33MHz timings */ -static struct chipset_bus_clock_list_entry sixty_six_base_hpt370a[] = { - { XFER_UDMA_5, 0x1488e673 }, - { XFER_UDMA_4, 0x1488e673 }, - { XFER_UDMA_3, 0x1498e673 }, - { XFER_UDMA_2, 0x1490e673 }, - { XFER_UDMA_1, 0x1498e677 }, - { XFER_UDMA_0, 0x14a0e73f }, - - { XFER_MW_DMA_2, 0x2480fa73 }, - { XFER_MW_DMA_1, 0x2480fa77 }, - { XFER_MW_DMA_0, 0x2480fb3f }, - - { XFER_PIO_4, 0x0c82be73 }, - { XFER_PIO_3, 0x0c82be95 }, - { XFER_PIO_2, 0x0c82beb7 }, - { XFER_PIO_1, 0x0d02bf37 }, - { XFER_PIO_0, 0x0d02bf5f }, - { 0, 0x0d02bf5f } -}; -static struct chipset_bus_clock_list_entry fifty_base_hpt370a[] = { - { XFER_UDMA_5, 0x12848242 }, - { XFER_UDMA_4, 0x12ac8242 }, - { XFER_UDMA_3, 0x128c8242 }, - { XFER_UDMA_2, 0x120c8242 }, - { XFER_UDMA_1, 0x12148254 }, - { XFER_UDMA_0, 0x121882ea }, - - { XFER_MW_DMA_2, 0x22808242 }, - { XFER_MW_DMA_1, 0x22808254 }, - { XFER_MW_DMA_0, 0x228082ea }, - - { XFER_PIO_4, 0x0a81f442 }, - { XFER_PIO_3, 0x0a81f443 }, - { XFER_PIO_2, 0x0a81f454 }, - { XFER_PIO_1, 0x0ac1f465 }, - { XFER_PIO_0, 0x0ac1f48a }, - { 0, 0x0ac1f48a } +static u32 forty_base_hpt36x[] = { + /* XFER_UDMA_6 */ 0x900fd943, + /* XFER_UDMA_5 */ 0x900fd943, + /* XFER_UDMA_4 */ 0x900fd943, + /* XFER_UDMA_3 */ 0x900ad943, + /* XFER_UDMA_2 */ 0x900bd943, + /* XFER_UDMA_1 */ 0x9008d943, + /* XFER_UDMA_0 */ 0x9008d943, + + /* XFER_MW_DMA_2 */ 0xa008d943, + /* XFER_MW_DMA_1 */ 0xa010d955, + /* XFER_MW_DMA_0 */ 0xa010d9fc, + + /* XFER_PIO_4 */ 0xc008d963, + /* XFER_PIO_3 */ 0xc010d974, + /* XFER_PIO_2 */ 0xc010d997, + /* XFER_PIO_1 */ 0xc010d9c7, + /* XFER_PIO_0 */ 0xc018d9d9 }; -static struct chipset_bus_clock_list_entry thirty_three_base_hpt372[] = { - { XFER_UDMA_6, 0x1c81dc62 }, - { XFER_UDMA_5, 0x1c6ddc62 }, - { XFER_UDMA_4, 0x1c8ddc62 }, - { XFER_UDMA_3, 0x1c8edc62 }, /* checkme */ - { XFER_UDMA_2, 0x1c91dc62 }, - { XFER_UDMA_1, 0x1c9adc62 }, /* checkme */ - { XFER_UDMA_0, 0x1c82dc62 }, /* checkme */ - - { XFER_MW_DMA_2, 0x2c829262 }, - { XFER_MW_DMA_1, 0x2c829266 }, /* checkme */ - { XFER_MW_DMA_0, 0x2c82922e }, /* checkme */ - - { XFER_PIO_4, 0x0c829c62 }, - { XFER_PIO_3, 0x0c829c84 }, - { XFER_PIO_2, 0x0c829ca6 }, - { XFER_PIO_1, 0x0d029d26 }, - { XFER_PIO_0, 0x0d029d5e }, - { 0, 0x0d029d5e } +static u32 thirty_three_base_hpt36x[] = { + /* XFER_UDMA_6 */ 0x90c9a731, + /* XFER_UDMA_5 */ 0x90c9a731, + /* XFER_UDMA_4 */ 0x90c9a731, + /* XFER_UDMA_3 */ 0x90cfa731, + /* XFER_UDMA_2 */ 0x90caa731, + /* XFER_UDMA_1 */ 0x90cba731, + /* XFER_UDMA_0 */ 0x90c8a731, + + /* XFER_MW_DMA_2 */ 0xa0c8a731, + /* XFER_MW_DMA_1 */ 0xa0c8a732, /* 0xa0c8a733 */ + /* XFER_MW_DMA_0 */ 0xa0c8a797, + + /* XFER_PIO_4 */ 0xc0c8a731, + /* XFER_PIO_3 */ 0xc0c8a742, + /* XFER_PIO_2 */ 0xc0d0a753, + /* XFER_PIO_1 */ 0xc0d0a7a3, /* 0xc0d0a793 */ + /* XFER_PIO_0 */ 0xc0d0a7aa /* 0xc0d0a7a7 */ }; -static struct chipset_bus_clock_list_entry fifty_base_hpt372[] = { - { XFER_UDMA_5, 0x12848242 }, - { XFER_UDMA_4, 0x12ac8242 }, - { XFER_UDMA_3, 0x128c8242 }, - { XFER_UDMA_2, 0x120c8242 }, - { XFER_UDMA_1, 0x12148254 }, - { XFER_UDMA_0, 0x121882ea }, - - { XFER_MW_DMA_2, 0x22808242 }, - { XFER_MW_DMA_1, 0x22808254 }, - { XFER_MW_DMA_0, 0x228082ea }, - - { XFER_PIO_4, 0x0a81f442 }, - { XFER_PIO_3, 0x0a81f443 }, - { XFER_PIO_2, 0x0a81f454 }, - { XFER_PIO_1, 0x0ac1f465 }, - { XFER_PIO_0, 0x0ac1f48a }, - { 0, 0x0a81f443 } +static u32 twenty_five_base_hpt36x[] = { + /* XFER_UDMA_6 */ 0x90c98521, + /* XFER_UDMA_5 */ 0x90c98521, + /* XFER_UDMA_4 */ 0x90c98521, + /* XFER_UDMA_3 */ 0x90cf8521, + /* XFER_UDMA_2 */ 0x90cf8521, + /* XFER_UDMA_1 */ 0x90cb8521, + /* XFER_UDMA_0 */ 0x90cb8521, + + /* XFER_MW_DMA_2 */ 0xa0ca8521, + /* XFER_MW_DMA_1 */ 0xa0ca8532, + /* XFER_MW_DMA_0 */ 0xa0ca8575, + + /* XFER_PIO_4 */ 0xc0ca8521, + /* XFER_PIO_3 */ 0xc0ca8532, + /* XFER_PIO_2 */ 0xc0ca8542, + /* XFER_PIO_1 */ 0xc0d08572, + /* XFER_PIO_0 */ 0xc0d08585 }; -static struct chipset_bus_clock_list_entry sixty_six_base_hpt372[] = { - { XFER_UDMA_6, 0x1c869c62 }, - { XFER_UDMA_5, 0x1cae9c62 }, - { XFER_UDMA_4, 0x1c8a9c62 }, - { XFER_UDMA_3, 0x1c8e9c62 }, - { XFER_UDMA_2, 0x1c929c62 }, - { XFER_UDMA_1, 0x1c9a9c62 }, - { XFER_UDMA_0, 0x1c829c62 }, - - { XFER_MW_DMA_2, 0x2c829c62 }, - { XFER_MW_DMA_1, 0x2c829c66 }, - { XFER_MW_DMA_0, 0x2c829d2e }, - - { XFER_PIO_4, 0x0c829c62 }, - { XFER_PIO_3, 0x0c829c84 }, - { XFER_PIO_2, 0x0c829ca6 }, - { XFER_PIO_1, 0x0d029d26 }, - { XFER_PIO_0, 0x0d029d5e }, - { 0, 0x0d029d26 } +static u32 thirty_three_base_hpt37x[] = { + /* XFER_UDMA_6 */ 0x12446231, /* 0x12646231 ?? */ + /* XFER_UDMA_5 */ 0x12446231, + /* XFER_UDMA_4 */ 0x12446231, + /* XFER_UDMA_3 */ 0x126c6231, + /* XFER_UDMA_2 */ 0x12486231, + /* XFER_UDMA_1 */ 0x124c6233, + /* XFER_UDMA_0 */ 0x12506297, + + /* XFER_MW_DMA_2 */ 0x22406c31, + /* XFER_MW_DMA_1 */ 0x22406c33, + /* XFER_MW_DMA_0 */ 0x22406c97, + + /* XFER_PIO_4 */ 0x06414e31, + /* XFER_PIO_3 */ 0x06414e42, + /* XFER_PIO_2 */ 0x06414e53, + /* XFER_PIO_1 */ 0x06814e93, + /* XFER_PIO_0 */ 0x06814ea7 }; -static struct chipset_bus_clock_list_entry thirty_three_base_hpt374[] = { - { XFER_UDMA_6, 0x12808242 }, - { XFER_UDMA_5, 0x12848242 }, - { XFER_UDMA_4, 0x12ac8242 }, - { XFER_UDMA_3, 0x128c8242 }, - { XFER_UDMA_2, 0x120c8242 }, - { XFER_UDMA_1, 0x12148254 }, - { XFER_UDMA_0, 0x121882ea }, - - { XFER_MW_DMA_2, 0x22808242 }, - { XFER_MW_DMA_1, 0x22808254 }, - { XFER_MW_DMA_0, 0x228082ea }, - - { XFER_PIO_4, 0x0a81f442 }, - { XFER_PIO_3, 0x0a81f443 }, - { XFER_PIO_2, 0x0a81f454 }, - { XFER_PIO_1, 0x0ac1f465 }, - { XFER_PIO_0, 0x0ac1f48a }, - { 0, 0x06814e93 } +static u32 fifty_base_hpt37x[] = { + /* XFER_UDMA_6 */ 0x12848242, + /* XFER_UDMA_5 */ 0x12848242, + /* XFER_UDMA_4 */ 0x12ac8242, + /* XFER_UDMA_3 */ 0x128c8242, + /* XFER_UDMA_2 */ 0x120c8242, + /* XFER_UDMA_1 */ 0x12148254, + /* XFER_UDMA_0 */ 0x121882ea, + + /* XFER_MW_DMA_2 */ 0x22808242, + /* XFER_MW_DMA_1 */ 0x22808254, + /* XFER_MW_DMA_0 */ 0x228082ea, + + /* XFER_PIO_4 */ 0x0a81f442, + /* XFER_PIO_3 */ 0x0a81f443, + /* XFER_PIO_2 */ 0x0a81f454, + /* XFER_PIO_1 */ 0x0ac1f465, + /* XFER_PIO_0 */ 0x0ac1f48a }; -/* FIXME: 50MHz timings for HPT374 */ - -#if 0 -static struct chipset_bus_clock_list_entry sixty_six_base_hpt374[] = { - { XFER_UDMA_6, 0x12406231 }, /* checkme */ - { XFER_UDMA_5, 0x12446231 }, /* 0x14846231 */ - { XFER_UDMA_4, 0x16814ea7 }, /* 0x14886231 */ - { XFER_UDMA_3, 0x16814ea7 }, /* 0x148c6231 */ - { XFER_UDMA_2, 0x16814ea7 }, /* 0x148c6231 */ - { XFER_UDMA_1, 0x16814ea7 }, /* 0x14906231 */ - { XFER_UDMA_0, 0x16814ea7 }, /* 0x14986231 */ - { XFER_MW_DMA_2, 0x16814ea7 }, /* 0x26514e21 */ - { XFER_MW_DMA_1, 0x16814ea7 }, /* 0x26514e97 */ - { XFER_MW_DMA_0, 0x16814ea7 }, /* 0x26514e97 */ - { XFER_PIO_4, 0x06814ea7 }, /* 0x06514e21 */ - { XFER_PIO_3, 0x06814ea7 }, /* 0x06514e22 */ - { XFER_PIO_2, 0x06814ea7 }, /* 0x06514e33 */ - { XFER_PIO_1, 0x06814ea7 }, /* 0x06914e43 */ - { XFER_PIO_0, 0x06814ea7 }, /* 0x06914e57 */ - { 0, 0x06814ea7 } +static u32 sixty_six_base_hpt37x[] = { + /* XFER_UDMA_6 */ 0x1c869c62, + /* XFER_UDMA_5 */ 0x1cae9c62, /* 0x1c8a9c62 */ + /* XFER_UDMA_4 */ 0x1c8a9c62, + /* XFER_UDMA_3 */ 0x1c8e9c62, + /* XFER_UDMA_2 */ 0x1c929c62, + /* XFER_UDMA_1 */ 0x1c9a9c62, + /* XFER_UDMA_0 */ 0x1c829c62, + + /* XFER_MW_DMA_2 */ 0x2c829c62, + /* XFER_MW_DMA_1 */ 0x2c829c66, + /* XFER_MW_DMA_0 */ 0x2c829d2e, + + /* XFER_PIO_4 */ 0x0c829c62, + /* XFER_PIO_3 */ 0x0c829c84, + /* XFER_PIO_2 */ 0x0c829ca6, + /* XFER_PIO_1 */ 0x0d029d26, + /* XFER_PIO_0 */ 0x0d029d5e }; -#endif #define HPT366_DEBUG_DRIVE_INFO 0 #define HPT374_ALLOW_ATA133_6 0 #define HPT371_ALLOW_ATA133_6 0 #define HPT302_ALLOW_ATA133_6 0 -#define HPT372_ALLOW_ATA133_6 1 +#define HPT372_ALLOW_ATA133_6 0 #define HPT370_ALLOW_ATA100_5 1 #define HPT366_ALLOW_ATA66_4 1 #define HPT366_ALLOW_ATA66_3 1 @@ -461,9 +357,10 @@ struct hpt_info int revision; /* Chipset revision */ int flags; /* Chipset properties */ #define PLL_MODE 1 -#define IS_372N 2 +#define IS_3xxN 2 +#define PCI_66MHZ 4 /* Speed table */ - struct chipset_bus_clock_list_entry *speed; + u32 *speed; }; /* @@ -600,12 +497,20 @@ static int check_in_drive_lists (ide_drive_t *drive, const char **list) return 0; } -static unsigned int pci_bus_clock_list (u8 speed, struct chipset_bus_clock_list_entry * chipset_table) +static u32 pci_bus_clock_list(u8 speed, u32 *chipset_table) { - for ( ; chipset_table->xfer_speed ; chipset_table++) - if (chipset_table->xfer_speed == speed) - return chipset_table->chipset_settings; - return chipset_table->chipset_settings; + int i; + + /* + * Lookup the transfer mode table to get the index into + * the timing table. + * + * NOTE: For XFER_PIO_SLOW, PIO mode 0 timings will be used. + */ + for (i = 0; i < ARRAY_SIZE(xfer_speeds) - 1; i++) + if (xfer_speeds[i] == speed) + break; + return chipset_table[i]; } static int hpt36x_tune_chipset(ide_drive_t *drive, u8 xferspeed) @@ -956,156 +861,127 @@ static int hpt374_ide_dma_end (ide_drive_t *drive) } /** - * hpt372n_set_clock - perform clock switching dance - * @drive: Drive to switch - * @mode: Switching mode (0x21 for write, 0x23 otherwise) + * hpt3xxn_set_clock - perform clock switching dance + * @hwif: hwif to switch + * @mode: clocking mode (0x21 for write, 0x23 otherwise) * - * Switch the DPLL clock on the HPT372N devices. This is a - * right mess. + * Switch the DPLL clock on the HPT3xxN devices. This is a right mess. + * NOTE: avoid touching the disabled primary channel on HPT371N -- it + * doesn't physically exist anyway... */ - -static void hpt372n_set_clock(ide_drive_t *drive, int mode) + +static void hpt3xxn_set_clock(ide_hwif_t *hwif, u8 mode) { - ide_hwif_t *hwif = HWIF(drive); - - /* FIXME: should we check for DMA active and BUG() */ + u8 mcr1, scr2 = hwif->INB(hwif->dma_master + 0x7b); + + if ((scr2 & 0x7f) == mode) + return; + + /* MISC. control register 1 has the channel enable bit... */ + mcr1 = hwif->INB(hwif->dma_master + 0x70); + /* Tristate the bus */ - outb(0x80, hwif->dma_base+0x73); - outb(0x80, hwif->dma_base+0x77); - + if (mcr1 & 0x04) + hwif->OUTB(0x80, hwif->dma_master + 0x73); + hwif->OUTB(0x80, hwif->dma_master + 0x77); + /* Switch clock and reset channels */ - outb(mode, hwif->dma_base+0x7B); - outb(0xC0, hwif->dma_base+0x79); - + hwif->OUTB(mode, hwif->dma_master + 0x7b); + hwif->OUTB(0xc0, hwif->dma_master + 0x79); + /* Reset state machines */ - outb(0x37, hwif->dma_base+0x70); - outb(0x37, hwif->dma_base+0x74); - + if (mcr1 & 0x04) + hwif->OUTB(0x37, hwif->dma_master + 0x70); + hwif->OUTB(0x37, hwif->dma_master + 0x74); + /* Complete reset */ - outb(0x00, hwif->dma_base+0x79); - + hwif->OUTB(0x00, hwif->dma_master + 0x79); + /* Reconnect channels to bus */ - outb(0x00, hwif->dma_base+0x73); - outb(0x00, hwif->dma_base+0x77); + if (mcr1 & 0x04) + hwif->OUTB(0x00, hwif->dma_master + 0x73); + hwif->OUTB(0x00, hwif->dma_master + 0x77); } /** - * hpt372n_rw_disk - prepare for I/O + * hpt3xxn_rw_disk - prepare for I/O * @drive: drive for command * @rq: block request structure * - * This is called when a disk I/O is issued to the 372N. + * This is called when a disk I/O is issued to HPT3xxN. * We need it because of the clock switching. */ -static void hpt372n_rw_disk(ide_drive_t *drive, struct request *rq) -{ - ide_hwif_t *hwif = drive->hwif; - int wantclock; - - wantclock = rq_data_dir(rq) ? 0x23 : 0x21; - - if (hwif->config_data != wantclock) { - hpt372n_set_clock(drive, wantclock); - hwif->config_data = wantclock; - } -} - -/* - * Since SUN Cobalt is attempting to do this operation, I should disclose - * this has been a long time ago Thu Jul 27 16:40:57 2000 was the patch date - * HOTSWAP ATA Infrastructure. - */ - -static void hpt3xx_reset (ide_drive_t *drive) -{ -} - -static int hpt3xx_tristate (ide_drive_t * drive, int state) +static void hpt3xxn_rw_disk(ide_drive_t *drive, struct request *rq) { ide_hwif_t *hwif = HWIF(drive); - struct pci_dev *dev = hwif->pci_dev; - u8 reg59h = 0, reset = (hwif->channel) ? 0x80 : 0x40; - u8 regXXh = 0, state_reg= (hwif->channel) ? 0x57 : 0x53; - - pci_read_config_byte(dev, 0x59, ®59h); - pci_read_config_byte(dev, state_reg, ®XXh); + u8 wantclock = rq_data_dir(rq) ? 0x23 : 0x21; - if (state) { - (void) ide_do_reset(drive); - pci_write_config_byte(dev, state_reg, regXXh|0x80); - pci_write_config_byte(dev, 0x59, reg59h|reset); - } else { - pci_write_config_byte(dev, 0x59, reg59h & ~(reset)); - pci_write_config_byte(dev, state_reg, regXXh & ~(0x80)); - (void) ide_do_reset(drive); - } - return 0; + hpt3xxn_set_clock(hwif, wantclock); } /* - * set/get power state for a drive. - * turning the power off does the following things: - * 1) soft-reset the drive - * 2) tri-states the ide bus + * Set/get power state for a drive. * - * when we turn things back on, we need to re-initialize things. + * When we turn the power back on, we need to re-initialize things. */ #define TRISTATE_BIT 0x8000 -static int hpt370_busproc(ide_drive_t * drive, int state) + +static int hpt3xx_busproc(ide_drive_t *drive, int state) { ide_hwif_t *hwif = drive->hwif; struct pci_dev *dev = hwif->pci_dev; - u8 tristate = 0, resetmask = 0, bus_reg = 0; - u16 tri_reg; + u8 tristate, resetmask, bus_reg = 0; + u16 tri_reg = 0; hwif->bus_state = state; if (hwif->channel) { /* secondary channel */ - tristate = 0x56; - resetmask = 0x80; + tristate = 0x56; + resetmask = 0x80; } else { /* primary channel */ - tristate = 0x52; + tristate = 0x52; resetmask = 0x40; } - /* grab status */ + /* Grab the status. */ pci_read_config_word(dev, tristate, &tri_reg); pci_read_config_byte(dev, 0x59, &bus_reg); - /* set the state. we don't set it if we don't need to do so. - * make sure that the drive knows that it has failed if it's off */ + /* + * Set the state. We don't set it if we don't need to do so. + * Make sure that the drive knows that it has failed if it's off. + */ switch (state) { case BUSSTATE_ON: - hwif->drives[0].failures = 0; - hwif->drives[1].failures = 0; - if ((bus_reg & resetmask) == 0) + if (!(bus_reg & resetmask)) return 0; - tri_reg &= ~TRISTATE_BIT; - bus_reg &= ~resetmask; - break; + hwif->drives[0].failures = hwif->drives[1].failures = 0; + + pci_write_config_byte(dev, 0x59, bus_reg & ~resetmask); + pci_write_config_word(dev, tristate, tri_reg & ~TRISTATE_BIT); + return 0; case BUSSTATE_OFF: - hwif->drives[0].failures = hwif->drives[0].max_failures + 1; - hwif->drives[1].failures = hwif->drives[1].max_failures + 1; - if ((tri_reg & TRISTATE_BIT) == 0 && (bus_reg & resetmask)) + if ((bus_reg & resetmask) && !(tri_reg & TRISTATE_BIT)) return 0; tri_reg &= ~TRISTATE_BIT; - bus_reg |= resetmask; break; case BUSSTATE_TRISTATE: - hwif->drives[0].failures = hwif->drives[0].max_failures + 1; - hwif->drives[1].failures = hwif->drives[1].max_failures + 1; - if ((tri_reg & TRISTATE_BIT) && (bus_reg & resetmask)) + if ((bus_reg & resetmask) && (tri_reg & TRISTATE_BIT)) return 0; tri_reg |= TRISTATE_BIT; - bus_reg |= resetmask; break; + default: + return -EINVAL; } - pci_write_config_byte(dev, 0x59, bus_reg); - pci_write_config_word(dev, tristate, tri_reg); + hwif->drives[0].failures = hwif->drives[0].max_failures + 1; + hwif->drives[1].failures = hwif->drives[1].max_failures + 1; + + pci_write_config_word(dev, tristate, tri_reg); + pci_write_config_byte(dev, 0x59, bus_reg | resetmask); return 0; } @@ -1119,14 +995,14 @@ static void __devinit hpt366_clocking(ide_hwif_t *hwif) /* detect bus speed by looking at control reg timing: */ switch((reg1 >> 8) & 7) { case 5: - info->speed = forty_base_hpt366; + info->speed = forty_base_hpt36x; break; case 9: - info->speed = twenty_five_base_hpt366; + info->speed = twenty_five_base_hpt36x; break; case 7: default: - info->speed = thirty_three_base_hpt366; + info->speed = thirty_three_base_hpt36x; break; } } @@ -1136,9 +1012,9 @@ static void __devinit hpt37x_clocking(ide_hwif_t *hwif) struct hpt_info *info = ide_get_hwifdata(hwif); struct pci_dev *dev = hwif->pci_dev; int adjust, i; - u16 freq; - u32 pll; - u8 reg5bh; + u16 freq = 0; + u32 pll, temp = 0; + u8 reg5bh = 0, mcr1 = 0; /* * default to pci clock. make sure MA15/16 are set to output @@ -1151,27 +1027,40 @@ static void __devinit hpt37x_clocking(ide_hwif_t *hwif) pci_write_config_byte(dev, 0x5b, 0x23); /* - * set up the PLL. we need to adjust it so that it's stable. - * freq = Tpll * 192 / Tpci + * We'll have to read f_CNT value in order to determine + * the PCI clock frequency according to the following ratio: + * + * f_CNT = Fpci * 192 / Fdpll + * + * First try reading the register in which the HighPoint BIOS + * saves f_CNT value before reprogramming the DPLL from its + * default setting (which differs for the various chips). + * NOTE: This register is only accessible via I/O space. * - * Todo. For non x86 should probably check the dword is - * set to 0xABCDExxx indicating the BIOS saved f_CNT + * In case the signature check fails, we'll have to resort to + * reading the f_CNT register itself in hopes that nobody has + * touched the DPLL yet... */ - pci_read_config_word(dev, 0x78, &freq); - freq &= 0x1FF; - + temp = inl(pci_resource_start(dev, 4) + 0x90); + if ((temp & 0xFFFFF000) != 0xABCDE000) { + printk(KERN_WARNING "HPT37X: no clock data saved by BIOS\n"); + + /* Calculate the average value of f_CNT */ + for (temp = i = 0; i < 128; i++) { + pci_read_config_word(dev, 0x78, &freq); + temp += freq & 0x1ff; + mdelay(1); + } + freq = temp / 128; + } else + freq = temp & 0x1ff; + /* - * The 372N uses different PCI clock information and has - * some other complications - * On PCI33 timing we must clock switch - * On PCI66 timing we must NOT use the PCI clock - * - * Currently we always set up the PLL for the 372N + * HPT3xxN chips use different PCI clock information. + * Currently we always set up the PLL for them. */ - - if(info->flags & IS_372N) - { - printk(KERN_INFO "hpt: HPT372N detected, using 372N timing.\n"); + + if (info->flags & IS_3xxN) { if(freq < 0x55) pll = F_LOW_PCI_33; else if(freq < 0x70) @@ -1180,10 +1069,8 @@ static void __devinit hpt37x_clocking(ide_hwif_t *hwif) pll = F_LOW_PCI_50; else pll = F_LOW_PCI_66; - - printk(KERN_INFO "FREQ: %d PLL: %d\n", freq, pll); - - /* We always use the pll not the PCI clock on 372N */ + + printk(KERN_INFO "HPT3xxN detected, FREQ: %d, PLL: %d\n", freq, pll); } else { @@ -1197,41 +1084,22 @@ static void __devinit hpt37x_clocking(ide_hwif_t *hwif) pll = F_LOW_PCI_66; if (pll == F_LOW_PCI_33) { - if (info->revision >= 8) - info->speed = thirty_three_base_hpt374; - else if (info->revision >= 5) - info->speed = thirty_three_base_hpt372; - else if (info->revision >= 4) - info->speed = thirty_three_base_hpt370a; - else - info->speed = thirty_three_base_hpt370; + info->speed = thirty_three_base_hpt37x; printk(KERN_DEBUG "HPT37X: using 33MHz PCI clock\n"); } else if (pll == F_LOW_PCI_40) { /* Unsupported */ } else if (pll == F_LOW_PCI_50) { - if (info->revision >= 8) - info->speed = fifty_base_hpt370a; - else if (info->revision >= 5) - info->speed = fifty_base_hpt372; - else if (info->revision >= 4) - info->speed = fifty_base_hpt370a; - else - info->speed = fifty_base_hpt370a; + info->speed = fifty_base_hpt37x; printk(KERN_DEBUG "HPT37X: using 50MHz PCI clock\n"); } else { - if (info->revision >= 8) { - printk(KERN_ERR "HPT37x: 66MHz timings are not supported.\n"); - } - else if (info->revision >= 5) - info->speed = sixty_six_base_hpt372; - else if (info->revision >= 4) - info->speed = sixty_six_base_hpt370a; - else - info->speed = sixty_six_base_hpt370; + info->speed = sixty_six_base_hpt37x; printk(KERN_DEBUG "HPT37X: using 66MHz PCI clock\n"); } } - + + if (pll == F_LOW_PCI_66) + info->flags |= PCI_66MHZ; + /* * only try the pll if we don't have a table for the clock * speed that we're running at. NOTE: the internal PLL will @@ -1248,11 +1116,8 @@ static void __devinit hpt37x_clocking(ide_hwif_t *hwif) info->flags |= PLL_MODE; /* - * FIXME: make this work correctly, esp with 372N as per - * reference driver code. - * - * adjust PLL based upon PCI clock, enable it, and wait for - * stabilization. + * Adjust the PLL based upon the PCI clock, enable it, and + * wait for stabilization... */ adjust = 0; freq = (pll < F_LOW_PCI_50) ? 2 : 4; @@ -1275,22 +1140,12 @@ static void __devinit hpt37x_clocking(ide_hwif_t *hwif) pci_write_config_dword(dev, 0x5c, pll & ~0x100); pci_write_config_byte(dev, 0x5b, 0x21); - if (info->revision >= 8) - info->speed = fifty_base_hpt370a; - else if (info->revision >= 5) - info->speed = fifty_base_hpt372; - else if (info->revision >= 4) - info->speed = fifty_base_hpt370a; - else - info->speed = fifty_base_hpt370a; + + info->speed = fifty_base_hpt37x; printk("HPT37X: using 50MHz internal PLL\n"); goto init_hpt37X_done; } } - if (!pci_get_drvdata(dev)) { - printk("No Clock Stabilization!!!\n"); - return; - } pll_recal: if (adjust & 1) pll -= (adjust >> 1); @@ -1300,11 +1155,16 @@ pll_recal: init_hpt37X_done: if (!info->speed) - printk(KERN_ERR "HPT37X%s: unknown bus timing [%d %d].\n", - (info->flags & IS_372N)?"N":"", pll, freq); - /* reset state engine */ - pci_write_config_byte(dev, 0x50, 0x37); - pci_write_config_byte(dev, 0x54, 0x37); + printk(KERN_ERR "HPT37x%s: unknown bus timing [%d %d].\n", + (info->flags & IS_3xxN) ? "N" : "", pll, freq); + /* + * Reset the state engines. + * NOTE: avoid accidentally enabling the primary channel on HPT371N. + */ + pci_read_config_byte(dev, 0x50, &mcr1); + if (mcr1 & 0x04) + pci_write_config_byte(dev, 0x50, 0x37); + pci_write_config_byte(dev, 0x54, 0x37); udelay(100); } @@ -1367,6 +1227,7 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif) struct pci_dev *dev = hwif->pci_dev; struct hpt_info *info = ide_get_hwifdata(hwif); u8 ata66 = 0, regmask = (hwif->channel) ? 0x01 : 0x02; + int serialize = HPT_SERIALIZE_IO; hwif->tuneproc = &hpt3xx_tune_drive; hwif->speedproc = &hpt3xx_tune_chipset; @@ -1374,8 +1235,20 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif) hwif->intrproc = &hpt3xx_intrproc; hwif->maskproc = &hpt3xx_maskproc; - if(info->flags & IS_372N) - hwif->rw_disk = &hpt372n_rw_disk; + /* + * HPT3xxN chips have some complications: + * + * - on 33 MHz PCI we must clock switch + * - on 66 MHz PCI we must NOT use the PCI clock + */ + if ((info->flags & (IS_3xxN | PCI_66MHZ)) == IS_3xxN) { + /* + * Clock is shared between the channels, + * so we'll have to serialize them... :-( + */ + serialize = 1; + hwif->rw_disk = &hpt3xxn_rw_disk; + } /* * The HPT37x uses the CBLID pins as outputs for MA15/MA16 @@ -1418,29 +1291,15 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif) PCI_FUNC(hwif->pci_dev->devfn)); #endif /* DEBUG */ -#ifdef HPT_SERIALIZE_IO - /* serialize access to this device */ - if (hwif->mate) + /* Serialize access to this device */ + if (serialize && hwif->mate) hwif->serialized = hwif->mate->serialized = 1; -#endif - if (info->revision >= 3) { - u8 reg5ah = 0; - pci_write_config_byte(dev, 0x5a, reg5ah & ~0x10); - /* - * set up ioctl for power status. - * note: power affects both - * drives on each channel - */ - hwif->resetproc = &hpt3xx_reset; - hwif->busproc = &hpt370_busproc; - } else if (info->revision >= 2) { - hwif->resetproc = &hpt3xx_reset; - hwif->busproc = &hpt3xx_tristate; - } else { - hwif->resetproc = &hpt3xx_reset; - hwif->busproc = &hpt3xx_tristate; - } + /* + * Set up ioctl for power status. + * NOTE: power affects both drives on each channel. + */ + hwif->busproc = &hpt3xx_busproc; if (!hwif->dma_base) { hwif->drives[0].autotune = 1; @@ -1490,7 +1349,7 @@ static void __devinit init_dma_hpt366(ide_hwif_t *hwif, unsigned long dmabase) return; if(info->speed == NULL) { - printk(KERN_WARNING "hpt: no known IDE timings, disabling DMA.\n"); + printk(KERN_WARNING "hpt366: no known IDE timings, disabling DMA.\n"); return; } @@ -1519,9 +1378,10 @@ static void __devinit init_dma_hpt366(ide_hwif_t *hwif, unsigned long dmabase) static void __devinit init_iops_hpt366(ide_hwif_t *hwif) { - struct hpt_info *info = kzalloc(sizeof(struct hpt_info), GFP_KERNEL); - unsigned long dmabase = pci_resource_start(hwif->pci_dev, 4); - u8 did, rid; + struct hpt_info *info = kzalloc(sizeof(struct hpt_info), GFP_KERNEL); + struct pci_dev *dev = hwif->pci_dev; + u16 did = dev->device; + u8 rid = 0; if(info == NULL) { printk(KERN_WARNING "hpt366: out of memory.\n"); @@ -1529,15 +1389,22 @@ static void __devinit init_iops_hpt366(ide_hwif_t *hwif) } ide_set_hwifdata(hwif, info); - if(dmabase) { - did = inb(dmabase + 0x22); - rid = inb(dmabase + 0x28); - - if((did == 4 && rid == 6) || (did == 5 && rid > 1)) - info->flags |= IS_372N; + /* Avoid doing the same thing twice. */ + if (hwif->channel && hwif->mate) { + memcpy(info, ide_get_hwifdata(hwif->mate), sizeof(struct hpt_info)); + return; } - info->revision = hpt_revision(hwif->pci_dev); + pci_read_config_byte(dev, PCI_CLASS_REVISION, &rid); + + if (( did == PCI_DEVICE_ID_TTI_HPT366 && rid == 6) || + ((did == PCI_DEVICE_ID_TTI_HPT372 || + did == PCI_DEVICE_ID_TTI_HPT302 || + did == PCI_DEVICE_ID_TTI_HPT371) && rid > 1) || + did == PCI_DEVICE_ID_TTI_HPT372N) + info->flags |= IS_3xxN; + + info->revision = hpt_revision(dev); if (info->revision >= 3) hpt37x_clocking(hwif); @@ -1574,6 +1441,23 @@ static int __devinit init_setup_hpt37x(struct pci_dev *dev, ide_pci_device_t *d) return ide_setup_pci_device(dev, d); } +static int __devinit init_setup_hpt371(struct pci_dev *dev, ide_pci_device_t *d) +{ + u8 mcr1 = 0; + + /* + * HPT371 chips physically have only one channel, the secondary one, + * but the primary channel registers do exist! Go figure... + * So, we manually disable the non-existing channel here + * (if the BIOS hasn't done this already). + */ + pci_read_config_byte(dev, 0x50, &mcr1); + if (mcr1 & 0x04) + pci_write_config_byte(dev, 0x50, (mcr1 & ~0x04)); + + return ide_setup_pci_device(dev, d); +} + static int __devinit init_setup_hpt366(struct pci_dev *dev, ide_pci_device_t *d) { struct pci_dev *findev = NULL; @@ -1661,13 +1545,14 @@ static ide_pci_device_t hpt366_chipsets[] __devinitdata = { .bootable = OFF_BOARD, },{ /* 3 */ .name = "HPT371", - .init_setup = init_setup_hpt37x, + .init_setup = init_setup_hpt371, .init_chipset = init_chipset_hpt366, .init_iops = init_iops_hpt366, .init_hwif = init_hwif_hpt366, .init_dma = init_dma_hpt366, .channels = 2, .autodma = AUTODMA, + .enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}}, .bootable = OFF_BOARD, },{ /* 4 */ .name = "HPT374", @@ -1699,13 +1584,16 @@ static ide_pci_device_t hpt366_chipsets[] __devinitdata = { * * Called when the PCI registration layer (or the IDE initialization) * finds a device matching our IDE device tables. + * + * NOTE: since we'll have to modify some fields of the ide_pci_device_t + * structure depending on the chip's revision, we'd better pass a local + * copy down the call chain... */ - static int __devinit hpt366_init_one(struct pci_dev *dev, const struct pci_device_id *id) { - ide_pci_device_t *d = &hpt366_chipsets[id->driver_data]; + ide_pci_device_t d = hpt366_chipsets[id->driver_data]; - return d->init_setup(dev, d); + return d.init_setup(dev, &d); } static struct pci_device_id hpt366_pci_tbl[] = { diff --git a/drivers/ide/pci/pdc202xx_new.c b/drivers/ide/pci/pdc202xx_new.c index 6c097e80b4d..7cb48576e47 100644 --- a/drivers/ide/pci/pdc202xx_new.c +++ b/drivers/ide/pci/pdc202xx_new.c @@ -9,6 +9,7 @@ * Split from: * linux/drivers/ide/pdc202xx.c Version 0.35 Mar. 30, 2002 * Copyright (C) 1998-2002 Andre Hedrick <andre@linux-ide.org> + * Copyright (C) 2005-2006 MontaVista Software, Inc. * Portions Copyright (C) 1999 Promise Technology, Inc. * Author: Frank Tiernan (frankt@promise.com) * Released under terms of General Public License @@ -38,6 +39,14 @@ #define PDC202_DEBUG_CABLE 0 +#undef DEBUG + +#ifdef DEBUG +#define DBG(fmt, args...) printk("%s: " fmt, __FUNCTION__, ## args) +#else +#define DBG(fmt, args...) +#endif + static const char *pdc_quirk_drives[] = { "QUANTUM FIREBALLlct08 08", "QUANTUM FIREBALLP KA6.4", @@ -50,37 +59,11 @@ static const char *pdc_quirk_drives[] = { NULL }; -#define set_2regs(a, b) \ - do { \ - hwif->OUTB((a + adj), indexreg); \ - hwif->OUTB(b, datareg); \ - } while(0) - -#define set_ultra(a, b, c) \ - do { \ - set_2regs(0x10,(a)); \ - set_2regs(0x11,(b)); \ - set_2regs(0x12,(c)); \ - } while(0) - -#define set_ata2(a, b) \ - do { \ - set_2regs(0x0e,(a)); \ - set_2regs(0x0f,(b)); \ - } while(0) - -#define set_pio(a, b, c) \ - do { \ - set_2regs(0x0c,(a)); \ - set_2regs(0x0d,(b)); \ - set_2regs(0x13,(c)); \ - } while(0) - -static u8 pdcnew_ratemask (ide_drive_t *drive) +static u8 max_dma_rate(struct pci_dev *pdev) { u8 mode; - switch(HWIF(drive)->pci_dev->device) { + switch(pdev->device) { case PCI_DEVICE_ID_PROMISE_20277: case PCI_DEVICE_ID_PROMISE_20276: case PCI_DEVICE_ID_PROMISE_20275: @@ -95,12 +78,21 @@ static u8 pdcnew_ratemask (ide_drive_t *drive) default: return 0; } - if (!eighty_ninty_three(drive)) - mode = min(mode, (u8)1); + return mode; } -static int check_in_drive_lists (ide_drive_t *drive, const char **list) +static u8 pdcnew_ratemask(ide_drive_t *drive) +{ + u8 mode = max_dma_rate(HWIF(drive)->pci_dev); + + if (!eighty_ninty_three(drive)) + mode = min_t(u8, mode, 1); + + return mode; +} + +static int check_in_drive_lists(ide_drive_t *drive, const char **list) { struct hd_driveid *id = drive->id; @@ -120,43 +112,141 @@ static int check_in_drive_lists (ide_drive_t *drive, const char **list) return 0; } -static int pdcnew_new_tune_chipset (ide_drive_t *drive, u8 xferspeed) +/** + * get_indexed_reg - Get indexed register + * @hwif: for the port address + * @index: index of the indexed register + */ +static u8 get_indexed_reg(ide_hwif_t *hwif, u8 index) +{ + u8 value; + + hwif->OUTB(index, hwif->dma_vendor1); + value = hwif->INB(hwif->dma_vendor3); + + DBG("index[%02X] value[%02X]\n", index, value); + return value; +} + +/** + * set_indexed_reg - Set indexed register + * @hwif: for the port address + * @index: index of the indexed register + */ +static void set_indexed_reg(ide_hwif_t *hwif, u8 index, u8 value) +{ + hwif->OUTB(index, hwif->dma_vendor1); + hwif->OUTB(value, hwif->dma_vendor3); + DBG("index[%02X] value[%02X]\n", index, value); +} + +/* + * ATA Timing Tables based on 133 MHz PLL output clock. + * + * If the PLL outputs 100 MHz clock, the ASIC hardware will set + * the timing registers automatically when "set features" command is + * issued to the device. However, if the PLL output clock is 133 MHz, + * the following tables must be used. + */ +static struct pio_timing { + u8 reg0c, reg0d, reg13; +} pio_timings [] = { + { 0xfb, 0x2b, 0xac }, /* PIO mode 0, IORDY off, Prefetch off */ + { 0x46, 0x29, 0xa4 }, /* PIO mode 1, IORDY off, Prefetch off */ + { 0x23, 0x26, 0x64 }, /* PIO mode 2, IORDY off, Prefetch off */ + { 0x27, 0x0d, 0x35 }, /* PIO mode 3, IORDY on, Prefetch off */ + { 0x23, 0x09, 0x25 }, /* PIO mode 4, IORDY on, Prefetch off */ +}; + +static struct mwdma_timing { + u8 reg0e, reg0f; +} mwdma_timings [] = { + { 0xdf, 0x5f }, /* MWDMA mode 0 */ + { 0x6b, 0x27 }, /* MWDMA mode 1 */ + { 0x69, 0x25 }, /* MWDMA mode 2 */ +}; + +static struct udma_timing { + u8 reg10, reg11, reg12; +} udma_timings [] = { + { 0x4a, 0x0f, 0xd5 }, /* UDMA mode 0 */ + { 0x3a, 0x0a, 0xd0 }, /* UDMA mode 1 */ + { 0x2a, 0x07, 0xcd }, /* UDMA mode 2 */ + { 0x1a, 0x05, 0xcd }, /* UDMA mode 3 */ + { 0x1a, 0x03, 0xcd }, /* UDMA mode 4 */ + { 0x1a, 0x02, 0xcb }, /* UDMA mode 5 */ + { 0x1a, 0x01, 0xcb }, /* UDMA mode 6 */ +}; + +static int pdcnew_tune_chipset(ide_drive_t *drive, u8 speed) { ide_hwif_t *hwif = HWIF(drive); - unsigned long indexreg = hwif->dma_vendor1; - unsigned long datareg = hwif->dma_vendor3; - u8 thold = 0x10; - u8 adj = (drive->dn%2) ? 0x08 : 0x00; - u8 speed = ide_rate_filter(pdcnew_ratemask(drive), xferspeed); - - if (speed == XFER_UDMA_2) { - hwif->OUTB((thold + adj), indexreg); - hwif->OUTB((hwif->INB(datareg) & 0x7f), datareg); - } + u8 adj = (drive->dn & 1) ? 0x08 : 0x00; + int err; - switch (speed) { - case XFER_UDMA_7: - speed = XFER_UDMA_6; - case XFER_UDMA_6: set_ultra(0x1a, 0x01, 0xcb); break; - case XFER_UDMA_5: set_ultra(0x1a, 0x02, 0xcb); break; - case XFER_UDMA_4: set_ultra(0x1a, 0x03, 0xcd); break; - case XFER_UDMA_3: set_ultra(0x1a, 0x05, 0xcd); break; - case XFER_UDMA_2: set_ultra(0x2a, 0x07, 0xcd); break; - case XFER_UDMA_1: set_ultra(0x3a, 0x0a, 0xd0); break; - case XFER_UDMA_0: set_ultra(0x4a, 0x0f, 0xd5); break; - case XFER_MW_DMA_2: set_ata2(0x69, 0x25); break; - case XFER_MW_DMA_1: set_ata2(0x6b, 0x27); break; - case XFER_MW_DMA_0: set_ata2(0xdf, 0x5f); break; - case XFER_PIO_4: set_pio(0x23, 0x09, 0x25); break; - case XFER_PIO_3: set_pio(0x27, 0x0d, 0x35); break; - case XFER_PIO_2: set_pio(0x23, 0x26, 0x64); break; - case XFER_PIO_1: set_pio(0x46, 0x29, 0xa4); break; - case XFER_PIO_0: set_pio(0xfb, 0x2b, 0xac); break; - default: - ; - } + speed = ide_rate_filter(pdcnew_ratemask(drive), speed); + + /* + * Issue SETFEATURES_XFER to the drive first. PDC202xx hardware will + * automatically set the timing registers based on 100 MHz PLL output. + */ + err = ide_config_drive_speed(drive, speed); + + /* + * As we set up the PLL to output 133 MHz for UltraDMA/133 capable + * chips, we must override the default register settings... + */ + if (max_dma_rate(hwif->pci_dev) == 4) { + u8 mode = speed & 0x07; + + switch (speed) { + case XFER_UDMA_6: + case XFER_UDMA_5: + case XFER_UDMA_4: + case XFER_UDMA_3: + case XFER_UDMA_2: + case XFER_UDMA_1: + case XFER_UDMA_0: + set_indexed_reg(hwif, 0x10 + adj, + udma_timings[mode].reg10); + set_indexed_reg(hwif, 0x11 + adj, + udma_timings[mode].reg11); + set_indexed_reg(hwif, 0x12 + adj, + udma_timings[mode].reg12); + break; + + case XFER_MW_DMA_2: + case XFER_MW_DMA_1: + case XFER_MW_DMA_0: + set_indexed_reg(hwif, 0x0e + adj, + mwdma_timings[mode].reg0e); + set_indexed_reg(hwif, 0x0f + adj, + mwdma_timings[mode].reg0f); + break; + case XFER_PIO_4: + case XFER_PIO_3: + case XFER_PIO_2: + case XFER_PIO_1: + case XFER_PIO_0: + set_indexed_reg(hwif, 0x0c + adj, + pio_timings[mode].reg0c); + set_indexed_reg(hwif, 0x0d + adj, + pio_timings[mode].reg0d); + set_indexed_reg(hwif, 0x13 + adj, + pio_timings[mode].reg13); + break; + default: + printk(KERN_ERR "pdc202xx_new: " + "Unknown speed %d ignored\n", speed); + } + } else if (speed == XFER_UDMA_2) { + /* Set tHOLD bit to 0 if using UDMA mode 2 */ + u8 tmp = get_indexed_reg(hwif, 0x10 + adj); - return (ide_config_drive_speed(drive, speed)); + set_indexed_reg(hwif, 0x10 + adj, tmp & 0x7f); + } + + return err; } /* 0 1 2 3 4 5 6 7 8 @@ -168,55 +258,55 @@ static int pdcnew_new_tune_chipset (ide_drive_t *drive, u8 xferspeed) */ static void pdcnew_tune_drive(ide_drive_t *drive, u8 pio) { - u8 speed; - - if (pio == 5) pio = 4; - speed = XFER_PIO_0 + ide_get_best_pio_mode(drive, 255, pio, NULL); - - (void)pdcnew_new_tune_chipset(drive, speed); + pio = ide_get_best_pio_mode(drive, pio, 4, NULL); + (void)pdcnew_tune_chipset(drive, XFER_PIO_0 + pio); } -static u8 pdcnew_new_cable_detect (ide_hwif_t *hwif) +static u8 pdcnew_cable_detect(ide_hwif_t *hwif) { - hwif->OUTB(0x0b, hwif->dma_vendor1); - return ((u8)((hwif->INB(hwif->dma_vendor3) & 0x04))); + return get_indexed_reg(hwif, 0x0b) & 0x04; } -static int config_chipset_for_dma (ide_drive_t *drive) + +static int config_chipset_for_dma(ide_drive_t *drive) { struct hd_driveid *id = drive->id; ide_hwif_t *hwif = HWIF(drive); - u8 speed = -1; - u8 cable; - - u8 ultra_66 = ((id->dma_ultra & 0x0010) || - (id->dma_ultra & 0x0008)) ? 1 : 0; - - cable = pdcnew_new_cable_detect(hwif); + u8 ultra_66 = (id->dma_ultra & 0x0078) ? 1 : 0; + u8 cable = pdcnew_cable_detect(hwif); + u8 speed; if (ultra_66 && cable) { - printk(KERN_WARNING "Warning: %s channel requires an 80-pin cable for operation.\n", hwif->channel ? "Secondary":"Primary"); + printk(KERN_WARNING "Warning: %s channel " + "requires an 80-pin cable for operation.\n", + hwif->channel ? "Secondary" : "Primary"); printk(KERN_WARNING "%s reduced to Ultra33 mode.\n", drive->name); } if (drive->media != ide_disk) return 0; - if (id->capability & 4) { /* IORDY_EN & PREFETCH_EN */ - hwif->OUTB((0x13 + ((drive->dn%2) ? 0x08 : 0x00)), hwif->dma_vendor1); - hwif->OUTB((hwif->INB(hwif->dma_vendor3)|0x03), hwif->dma_vendor3); + + if (id->capability & 4) { + /* + * Set IORDY_EN & PREFETCH_EN (this seems to have + * NO real effect since this register is reloaded + * by hardware when the transfer mode is selected) + */ + u8 tmp, adj = (drive->dn & 1) ? 0x08 : 0x00; + + tmp = get_indexed_reg(hwif, 0x13 + adj); + set_indexed_reg(hwif, 0x13 + adj, tmp | 0x03); } speed = ide_dma_speed(drive, pdcnew_ratemask(drive)); - if (!(speed)) { - hwif->tuneproc(drive, 5); + if (!speed) return 0; - } (void) hwif->speedproc(drive, speed); return ide_dma_enable(drive); } -static int pdcnew_config_drive_xfer_rate (ide_drive_t *drive) +static int pdcnew_config_drive_xfer_rate(ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); struct hd_driveid *id = drive->id; @@ -234,16 +324,16 @@ static int pdcnew_config_drive_xfer_rate (ide_drive_t *drive) } else if ((id->capability & 8) || (id->field_valid & 2)) { fast_ata_pio: - hwif->tuneproc(drive, 5); + hwif->tuneproc(drive, 255); return hwif->ide_dma_off_quietly(drive); } /* IORDY not supported */ return 0; } -static int pdcnew_quirkproc (ide_drive_t *drive) +static int pdcnew_quirkproc(ide_drive_t *drive) { - return ((int) check_in_drive_lists(drive, pdc_quirk_drives)); + return check_in_drive_lists(drive, pdc_quirk_drives); } static int pdcnew_ide_dma_lostirq(ide_drive_t *drive) @@ -260,21 +350,100 @@ static int pdcnew_ide_dma_timeout(ide_drive_t *drive) return __ide_dma_timeout(drive); } -static void pdcnew_new_reset (ide_drive_t *drive) +static void pdcnew_reset(ide_drive_t *drive) { /* * Deleted this because it is redundant from the caller. */ - printk(KERN_WARNING "PDC202XX: %s channel reset.\n", + printk(KERN_WARNING "pdc202xx_new: %s channel reset.\n", HWIF(drive)->channel ? "Secondary" : "Primary"); } +/** + * read_counter - Read the byte count registers + * @dma_base: for the port address + */ +static long __devinit read_counter(u32 dma_base) +{ + u32 pri_dma_base = dma_base, sec_dma_base = dma_base + 0x08; + u8 cnt0, cnt1, cnt2, cnt3; + long count = 0, last; + int retry = 3; + + do { + last = count; + + /* Read the current count */ + outb(0x20, pri_dma_base + 0x01); + cnt0 = inb(pri_dma_base + 0x03); + outb(0x21, pri_dma_base + 0x01); + cnt1 = inb(pri_dma_base + 0x03); + outb(0x20, sec_dma_base + 0x01); + cnt2 = inb(sec_dma_base + 0x03); + outb(0x21, sec_dma_base + 0x01); + cnt3 = inb(sec_dma_base + 0x03); + + count = (cnt3 << 23) | (cnt2 << 15) | (cnt1 << 8) | cnt0; + + /* + * The 30-bit decrementing counter is read in 4 pieces. + * Incorrect value may be read when the most significant bytes + * are changing... + */ + } while (retry-- && (((last ^ count) & 0x3fff8000) || last < count)); + + DBG("cnt0[%02X] cnt1[%02X] cnt2[%02X] cnt3[%02X]\n", + cnt0, cnt1, cnt2, cnt3); + + return count; +} + +/** + * detect_pll_input_clock - Detect the PLL input clock in Hz. + * @dma_base: for the port address + * E.g. 16949000 on 33 MHz PCI bus, i.e. half of the PCI clock. + */ +static long __devinit detect_pll_input_clock(unsigned long dma_base) +{ + long start_count, end_count; + long pll_input; + u8 scr1; + + start_count = read_counter(dma_base); + + /* Start the test mode */ + outb(0x01, dma_base + 0x01); + scr1 = inb(dma_base + 0x03); + DBG("scr1[%02X]\n", scr1); + outb(scr1 | 0x40, dma_base + 0x03); + + /* Let the counter run for 10 ms. */ + mdelay(10); + + end_count = read_counter(dma_base); + + /* Stop the test mode */ + outb(0x01, dma_base + 0x01); + scr1 = inb(dma_base + 0x03); + DBG("scr1[%02X]\n", scr1); + outb(scr1 & ~0x40, dma_base + 0x03); + + /* + * Calculate the input clock in Hz + * (the clock counter is 30 bit wide and counts down) + */ + pll_input = ((start_count - end_count) & 0x3ffffff) * 100; + + DBG("start[%ld] end[%ld]\n", start_count, end_count); + + return pll_input; +} + #ifdef CONFIG_PPC_PMAC static void __devinit apple_kiwi_init(struct pci_dev *pdev) { struct device_node *np = pci_device_to_OF_node(pdev); unsigned int class_rev = 0; - void __iomem *mmio; u8 conf; if (np == NULL || !device_is_compatible(np, "kiwi-root")) @@ -285,30 +454,20 @@ static void __devinit apple_kiwi_init(struct pci_dev *pdev) if (class_rev >= 0x03) { /* Setup chip magic config stuff (from darwin) */ - pci_read_config_byte(pdev, 0x40, &conf); - pci_write_config_byte(pdev, 0x40, conf | 0x01); - } - mmio = ioremap(pci_resource_start(pdev, 5), - pci_resource_len(pdev, 5)); - - /* Setup some PLL stuffs */ - switch (pdev->device) { - case PCI_DEVICE_ID_PROMISE_20270: - writew(0x0d2b, mmio + 0x1202); - mdelay(30); - break; - case PCI_DEVICE_ID_PROMISE_20271: - writew(0x0826, mmio + 0x1202); - mdelay(30); - break; + pci_read_config_byte (pdev, 0x40, &conf); + pci_write_config_byte(pdev, 0x40, (conf | 0x01)); } - - iounmap(mmio); } #endif /* CONFIG_PPC_PMAC */ static unsigned int __devinit init_chipset_pdcnew(struct pci_dev *dev, const char *name) { + unsigned long dma_base = pci_resource_start(dev, 4); + unsigned long sec_dma_base = dma_base + 0x08; + long pll_input, pll_output, ratio; + int f, r; + u8 pll_ctl0, pll_ctl1; + if (dev->resource[PCI_ROM_RESOURCE].start) { pci_write_config_dword(dev, PCI_ROM_ADDRESS, dev->resource[PCI_ROM_RESOURCE].start | PCI_ROM_ADDRESS_ENABLE); @@ -320,6 +479,106 @@ static unsigned int __devinit init_chipset_pdcnew(struct pci_dev *dev, const cha apple_kiwi_init(dev); #endif + /* Calculate the required PLL output frequency */ + switch(max_dma_rate(dev)) { + case 4: /* it's 133 MHz for Ultra133 chips */ + pll_output = 133333333; + break; + case 3: /* and 100 MHz for Ultra100 chips */ + default: + pll_output = 100000000; + break; + } + + /* + * Detect PLL input clock. + * On some systems, where PCI bus is running at non-standard clock rate + * (e.g. 25 or 40 MHz), we have to adjust the cycle time. + * PDC20268 and newer chips employ PLL circuit to help correct timing + * registers setting. + */ + pll_input = detect_pll_input_clock(dma_base); + printk("%s: PLL input clock is %ld kHz\n", name, pll_input / 1000); + + /* Sanity check */ + if (unlikely(pll_input < 5000000L || pll_input > 70000000L)) { + printk(KERN_ERR "%s: Bad PLL input clock %ld Hz, giving up!\n", + name, pll_input); + goto out; + } + +#ifdef DEBUG + DBG("pll_output is %ld Hz\n", pll_output); + + /* Show the current clock value of PLL control register + * (maybe already configured by the BIOS) + */ + outb(0x02, sec_dma_base + 0x01); + pll_ctl0 = inb(sec_dma_base + 0x03); + outb(0x03, sec_dma_base + 0x01); + pll_ctl1 = inb(sec_dma_base + 0x03); + + DBG("pll_ctl[%02X][%02X]\n", pll_ctl0, pll_ctl1); +#endif + + /* + * Calculate the ratio of F, R and NO + * POUT = (F + 2) / (( R + 2) * NO) + */ + ratio = pll_output / (pll_input / 1000); + if (ratio < 8600L) { /* 8.6x */ + /* Using NO = 0x01, R = 0x0d */ + r = 0x0d; + } else if (ratio < 12900L) { /* 12.9x */ + /* Using NO = 0x01, R = 0x08 */ + r = 0x08; + } else if (ratio < 16100L) { /* 16.1x */ + /* Using NO = 0x01, R = 0x06 */ + r = 0x06; + } else if (ratio < 64000L) { /* 64x */ + r = 0x00; + } else { + /* Invalid ratio */ + printk(KERN_ERR "%s: Bad ratio %ld, giving up!\n", name, ratio); + goto out; + } + + f = (ratio * (r + 2)) / 1000 - 2; + + DBG("F[%d] R[%d] ratio*1000[%ld]\n", f, r, ratio); + + if (unlikely(f < 0 || f > 127)) { + /* Invalid F */ + printk(KERN_ERR "%s: F[%d] invalid!\n", name, f); + goto out; + } + + pll_ctl0 = (u8) f; + pll_ctl1 = (u8) r; + + DBG("Writing pll_ctl[%02X][%02X]\n", pll_ctl0, pll_ctl1); + + outb(0x02, sec_dma_base + 0x01); + outb(pll_ctl0, sec_dma_base + 0x03); + outb(0x03, sec_dma_base + 0x01); + outb(pll_ctl1, sec_dma_base + 0x03); + + /* Wait the PLL circuit to be stable */ + mdelay(30); + +#ifdef DEBUG + /* + * Show the current clock value of PLL control register + */ + outb(0x02, sec_dma_base + 0x01); + pll_ctl0 = inb(sec_dma_base + 0x03); + outb(0x03, sec_dma_base + 0x01); + pll_ctl1 = inb(sec_dma_base + 0x03); + + DBG("pll_ctl[%02X][%02X]\n", pll_ctl0, pll_ctl1); +#endif + + out: return dev->irq; } @@ -329,8 +588,8 @@ static void __devinit init_hwif_pdc202new(ide_hwif_t *hwif) hwif->tuneproc = &pdcnew_tune_drive; hwif->quirkproc = &pdcnew_quirkproc; - hwif->speedproc = &pdcnew_new_tune_chipset; - hwif->resetproc = &pdcnew_new_reset; + hwif->speedproc = &pdcnew_tune_chipset; + hwif->resetproc = &pdcnew_reset; hwif->drives[0].autotune = hwif->drives[1].autotune = 1; @@ -342,11 +601,14 @@ static void __devinit init_hwif_pdc202new(ide_hwif_t *hwif) hwif->ide_dma_check = &pdcnew_config_drive_xfer_rate; hwif->ide_dma_lostirq = &pdcnew_ide_dma_lostirq; hwif->ide_dma_timeout = &pdcnew_ide_dma_timeout; - if (!(hwif->udma_four)) - hwif->udma_four = (pdcnew_new_cable_detect(hwif)) ? 0 : 1; + + if (!hwif->udma_four) + hwif->udma_four = pdcnew_cable_detect(hwif) ? 0 : 1; + if (!noautodma) hwif->autodma = 1; hwif->drives[0].autodma = hwif->drives[1].autodma = hwif->autodma; + #if PDC202_DEBUG_CABLE printk(KERN_DEBUG "%s: %s-pin cable\n", hwif->name, hwif->udma_four ? "80" : "40"); @@ -362,6 +624,7 @@ static int __devinit init_setup_pdc20270(struct pci_dev *dev, ide_pci_device_t *d) { struct pci_dev *findev = NULL; + int ret; if ((dev->bus->self && dev->bus->self->vendor == PCI_VENDOR_ID_DEC) && @@ -369,14 +632,16 @@ static int __devinit init_setup_pdc20270(struct pci_dev *dev, if (PCI_SLOT(dev->devfn) & 2) return -ENODEV; d->extra = 0; - while ((findev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, findev)) != NULL) { + while ((findev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, findev)) != NULL) { if ((findev->vendor == dev->vendor) && (findev->device == dev->device) && (PCI_SLOT(findev->devfn) & 2)) { if (findev->irq != dev->irq) { findev->irq = dev->irq; } - return ide_setup_pci_devices(dev, findev, d); + ret = ide_setup_pci_devices(dev, findev, d); + pci_dev_put(findev); + return ret; } } } diff --git a/drivers/ide/pci/piix.c b/drivers/ide/pci/piix.c index cdc3aab9ebc..edb37f3d558 100644 --- a/drivers/ide/pci/piix.c +++ b/drivers/ide/pci/piix.c @@ -1,13 +1,14 @@ /* - * linux/drivers/ide/pci/piix.c Version 0.44 March 20, 2003 + * linux/drivers/ide/pci/piix.c Version 0.45 May 12, 2006 * * Copyright (C) 1998-1999 Andrzej Krzysztofowicz, Author and Maintainer * Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org> * Copyright (C) 2003 Red Hat Inc <alan@redhat.com> + * Copyright (C) 2006 MontaVista Software, Inc. <source@mvista.com> * * May be copied or modified under the terms of the GNU General Public License * - * PIO mode setting function for Intel chipsets. + * PIO mode setting function for Intel chipsets. * For use instead of BIOS settings. * * 40-41 @@ -25,7 +26,7 @@ * sitre = word42 & 0x4000; secondary * * 44 8421|8421 hdd|hdb - * + * * 48 8421 hdd|hdc|hdb|hda udma enabled * * 0001 hda @@ -353,56 +354,24 @@ static int piix_tune_chipset (ide_drive_t *drive, u8 xferspeed) } /** - * piix_faulty_dma0 - check for DMA0 errata - * @hwif: IDE interface to check - * - * If an ICH/ICH0/ICH2 interface is is operating in multi-word - * DMA mode with 600nS cycle time the IDE PIO prefetch buffer will - * inadvertently provide an extra piece of secondary data to the primary - * device resulting in data corruption. - * - * With such a device this test function returns true. This allows - * our tuning code to follow Intel recommendations and use PIO on - * such devices. - */ - -static int piix_faulty_dma0(ide_hwif_t *hwif) -{ - switch(hwif->pci_dev->device) - { - case PCI_DEVICE_ID_INTEL_82801AA_1: /* ICH */ - case PCI_DEVICE_ID_INTEL_82801AB_1: /* ICH0 */ - case PCI_DEVICE_ID_INTEL_82801BA_8: /* ICH2 */ - case PCI_DEVICE_ID_INTEL_82801BA_9: /* ICH2 */ - return 1; - } - return 0; -} - -/** * piix_config_drive_for_dma - configure drive for DMA * @drive: IDE drive to configure * * Set up a PIIX interface channel for the best available speed. - * We prefer UDMA if it is available and then MWDMA. If DMA is - * not available we switch to PIO and return 0. + * We prefer UDMA if it is available and then MWDMA. If DMA is + * not available we switch to PIO and return 0. */ static int piix_config_drive_for_dma (ide_drive_t *drive) { u8 speed = ide_dma_speed(drive, piix_ratemask(drive)); - - /* Some ICH devices cannot support DMA mode 0 */ - if(speed == XFER_MW_DMA_0 && piix_faulty_dma0(HWIF(drive))) - speed = 0; - - /* If no DMA speed was available or the chipset has DMA bugs - then disable DMA and use PIO */ - - if (!speed || no_piix_dma) { - u8 tspeed = ide_get_best_pio_mode(drive, 255, 5, NULL); - speed = piix_dma_2_pio(XFER_PIO_0 + tspeed); - } + + /* + * If no DMA speed was available or the chipset has DMA bugs + * then disable DMA and use PIO + */ + if (!speed || no_piix_dma) + return 0; (void) piix_tune_chipset(drive, speed); return ide_dma_enable(drive); @@ -425,17 +394,16 @@ static int piix_config_drive_xfer_rate (ide_drive_t *drive) if ((id->capability & 1) && drive->autodma) { - if (ide_use_dma(drive)) { - if (piix_config_drive_for_dma(drive)) - return hwif->ide_dma_on(drive); - } + if (ide_use_dma(drive) && piix_config_drive_for_dma(drive)) + return hwif->ide_dma_on(drive); goto fast_ata_pio; } else if ((id->capability & 8) || (id->field_valid & 2)) { fast_ata_pio: /* Find best PIO mode. */ - hwif->tuneproc(drive, 255); + (void) hwif->speedproc(drive, XFER_PIO_0 + + ide_get_best_pio_mode(drive, 255, 4, NULL)); return hwif->ide_dma_off_quietly(drive); } /* IORDY not supported */ @@ -505,6 +473,10 @@ static void __devinit init_hwif_piix(ide_hwif_t *hwif) /* This is a painful system best to let it self tune for now */ return; } + /* ESB2 appears to generate spurious DMA interrupts in PIO mode + when in native mode */ + if (hwif->pci_dev->device == PCI_DEVICE_ID_INTEL_ESB2_18) + hwif->atapi_irq_bogon = 1; hwif->autodma = 0; hwif->tuneproc = &piix_tune_drive; diff --git a/drivers/ide/pci/sis5513.c b/drivers/ide/pci/sis5513.c index 92edf76bd7a..6b313139b5e 100644 --- a/drivers/ide/pci/sis5513.c +++ b/drivers/ide/pci/sis5513.c @@ -800,9 +800,10 @@ static unsigned int __devinit init_chipset_sis5513 (struct pci_dev *dev, const c if (trueid == 0x5517) { /* SiS 961/961B */ - lpc_bridge = pci_find_slot(0x00, 0x10); /* Bus 0, Dev 2, Fn 0 */ + lpc_bridge = pci_get_slot(dev->bus, 0x10); /* Bus 0, Dev 2, Fn 0 */ pci_read_config_byte(lpc_bridge, PCI_REVISION_ID, &sbrev); pci_read_config_byte(dev, 0x49, &prefctl); + pci_dev_put(lpc_bridge); if (sbrev == 0x10 && (prefctl & 0x80)) { printk(KERN_INFO "SIS5513: SiS 961B MuTIOL IDE UDMA133 controller\n"); diff --git a/drivers/ide/pci/sl82c105.c b/drivers/ide/pci/sl82c105.c index 0b4b6049851..5afefe8692f 100644 --- a/drivers/ide/pci/sl82c105.c +++ b/drivers/ide/pci/sl82c105.c @@ -299,14 +299,14 @@ static void sl82c105_selectproc(ide_drive_t *drive) //DBG(("sl82c105_selectproc(drive:%s)\n", drive->name)); mask = hwif->channel ? CTRL_P1F16 : CTRL_P0F16; - old = val = *((u32 *)&hwif->hwif_data); + old = val = (u32)pci_get_drvdata(dev); if (drive->using_dma) val &= ~mask; else val |= mask; if (old != val) { pci_write_config_dword(dev, 0x40, val); - *((u32 *)&hwif->hwif_data) = val; + pci_set_drvdata(dev, (void *)val); } } @@ -316,14 +316,13 @@ static void sl82c105_selectproc(ide_drive_t *drive) */ static void sl82c105_resetproc(ide_drive_t *drive) { - ide_hwif_t *hwif = HWIF(drive); - struct pci_dev *dev = hwif->pci_dev; + struct pci_dev *dev = HWIF(drive)->pci_dev; u32 val; DBG(("sl82c105_resetproc(drive:%s)\n", drive->name)); pci_read_config_dword(dev, 0x40, &val); - *((u32 *)&hwif->hwif_data) = val; + pci_set_drvdata(dev, (void *)val); } /* @@ -394,6 +393,7 @@ static unsigned int __devinit init_chipset_sl82c105(struct pci_dev *dev, const c pci_read_config_dword(dev, 0x40, &val); val |= CTRL_P0EN | CTRL_P0F16 | CTRL_P1F16; pci_write_config_dword(dev, 0x40, val); + pci_set_drvdata(dev, (void *)val); return dev->irq; } @@ -404,30 +404,25 @@ static unsigned int __devinit init_chipset_sl82c105(struct pci_dev *dev, const c static void __devinit init_hwif_sl82c105(ide_hwif_t *hwif) { - struct pci_dev *dev = hwif->pci_dev; unsigned int rev; u8 dma_state; - u32 val; - + DBG(("init_hwif_sl82c105(hwif: ide%d)\n", hwif->index)); hwif->tuneproc = tune_sl82c105; hwif->selectproc = sl82c105_selectproc; hwif->resetproc = sl82c105_resetproc; - - /* Default to PIO 0 for fallback unless tuned otherwise, - * we always autotune PIO, this is done before DMA is - * checked, so there is no risk of accidentally disabling - * DMA - */ + + /* + * Default to PIO 0 for fallback unless tuned otherwise. + * We always autotune PIO, this is done before DMA is checked, + * so there's no risk of accidentally disabling DMA + */ hwif->drives[0].pio_speed = XFER_PIO_0; hwif->drives[0].autotune = 1; - hwif->drives[1].pio_speed = XFER_PIO_1; + hwif->drives[1].pio_speed = XFER_PIO_0; hwif->drives[1].autotune = 1; - pci_read_config_dword(dev, 0x40, &val); - *((u32 *)&hwif->hwif_data) = val; - hwif->atapi_dma = 0; hwif->mwdma_mask = 0; hwif->swdma_mask = 0; diff --git a/drivers/ide/pci/slc90e66.c b/drivers/ide/pci/slc90e66.c index 4a1853af3bb..9be7e49cba0 100644 --- a/drivers/ide/pci/slc90e66.c +++ b/drivers/ide/pci/slc90e66.c @@ -1,9 +1,10 @@ /* - * linux/drivers/ide/pci/slc90e66.c Version 0.11 September 11, 2002 + * linux/drivers/ide/pci/slc90e66.c Version 0.12 May 12, 2006 * * Copyright (C) 2000-2002 Andre Hedrick <andre@linux-ide.org> + * Copyright (C) 2006 MontaVista Software, Inc. <source@mvista.com> * - * This a look-a-like variation of the ICH0 PIIX4 Ultra-66, + * This is a look-alike variation of the ICH0 PIIX4 Ultra-66, * but this keeps the ISA-Bridge and slots alive. * */ @@ -158,10 +159,8 @@ static int slc90e66_config_drive_for_dma (ide_drive_t *drive) { u8 speed = ide_dma_speed(drive, slc90e66_ratemask(drive)); - if (!(speed)) { - u8 tspeed = ide_get_best_pio_mode(drive, 255, 5, NULL); - speed = slc90e66_dma_2_pio(XFER_PIO_0 + tspeed); - } + if (!speed) + return 0; (void) slc90e66_tune_chipset(drive, speed); return ide_dma_enable(drive); @@ -176,16 +175,15 @@ static int slc90e66_config_drive_xfer_rate (ide_drive_t *drive) if (id && (id->capability & 1) && drive->autodma) { - if (ide_use_dma(drive)) { - if (slc90e66_config_drive_for_dma(drive)) - return hwif->ide_dma_on(drive); - } + if (ide_use_dma(drive) && slc90e66_config_drive_for_dma(drive)) + return hwif->ide_dma_on(drive); goto fast_ata_pio; } else if ((id->capability & 8) || (id->field_valid & 2)) { fast_ata_pio: - hwif->tuneproc(drive, 5); + (void) hwif->speedproc(drive, XFER_PIO_0 + + ide_get_best_pio_mode(drive, 255, 4, NULL)); return hwif->ide_dma_off_quietly(drive); } /* IORDY not supported */ diff --git a/drivers/ide/pci/via82cxxx.c b/drivers/ide/pci/via82cxxx.c index 2af634d7acf..381cc6f101c 100644 --- a/drivers/ide/pci/via82cxxx.c +++ b/drivers/ide/pci/via82cxxx.c @@ -35,7 +35,7 @@ #include <linux/ide.h> #include <asm/io.h> -#ifdef CONFIG_PPC_MULTIPLATFORM +#ifdef CONFIG_PPC_CHRP #include <asm/processor.h> #endif @@ -123,7 +123,7 @@ struct via82cxxx_dev static void via_set_speed(ide_hwif_t *hwif, u8 dn, struct ide_timing *timing) { struct pci_dev *dev = hwif->pci_dev; - struct via82cxxx_dev *vdev = ide_get_hwifdata(hwif); + struct via82cxxx_dev *vdev = pci_get_drvdata(hwif->pci_dev); u8 t; if (~vdev->via_config->flags & VIA_BAD_AST) { @@ -162,7 +162,7 @@ static void via_set_speed(ide_hwif_t *hwif, u8 dn, struct ide_timing *timing) static int via_set_drive(ide_drive_t *drive, u8 speed) { ide_drive_t *peer = HWIF(drive)->drives + (~drive->dn & 1); - struct via82cxxx_dev *vdev = ide_get_hwifdata(drive->hwif); + struct via82cxxx_dev *vdev = pci_get_drvdata(drive->hwif->pci_dev); struct ide_timing t, p; unsigned int T, UT; @@ -225,7 +225,7 @@ static void via82cxxx_tune_drive(ide_drive_t *drive, u8 pio) static int via82cxxx_ide_dma_check (ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); - struct via82cxxx_dev *vdev = ide_get_hwifdata(hwif); + struct via82cxxx_dev *vdev = pci_get_drvdata(hwif->pci_dev); u16 w80 = hwif->udma_four; u16 speed = ide_find_best_mode(drive, @@ -262,6 +262,53 @@ static struct via_isa_bridge *via_config_find(struct pci_dev **isa) return via_config; } +/* + * Check and handle 80-wire cable presence + */ +static void __devinit via_cable_detect(struct via82cxxx_dev *vdev, u32 u) +{ + int i; + + switch (vdev->via_config->flags & VIA_UDMA) { + case VIA_UDMA_66: + for (i = 24; i >= 0; i -= 8) + if (((u >> (i & 16)) & 8) && + ((u >> i) & 0x20) && + (((u >> i) & 7) < 2)) { + /* + * 2x PCI clock and + * UDMA w/ < 3T/cycle + */ + vdev->via_80w |= (1 << (1 - (i >> 4))); + } + break; + + case VIA_UDMA_100: + for (i = 24; i >= 0; i -= 8) + if (((u >> i) & 0x10) || + (((u >> i) & 0x20) && + (((u >> i) & 7) < 4))) { + /* BIOS 80-wire bit or + * UDMA w/ < 60ns/cycle + */ + vdev->via_80w |= (1 << (1 - (i >> 4))); + } + break; + + case VIA_UDMA_133: + for (i = 24; i >= 0; i -= 8) + if (((u >> i) & 0x10) || + (((u >> i) & 0x20) && + (((u >> i) & 7) < 6))) { + /* BIOS 80-wire bit or + * UDMA w/ < 60ns/cycle + */ + vdev->via_80w |= (1 << (1 - (i >> 4))); + } + break; + } +} + /** * init_chipset_via82cxxx - initialization handler * @dev: PCI device @@ -274,31 +321,40 @@ static struct via_isa_bridge *via_config_find(struct pci_dev **isa) static unsigned int __devinit init_chipset_via82cxxx(struct pci_dev *dev, const char *name) { struct pci_dev *isa = NULL; + struct via82cxxx_dev *vdev; struct via_isa_bridge *via_config; u8 t, v; - unsigned int u; + u32 u; + + vdev = kzalloc(sizeof(*vdev), GFP_KERNEL); + if (!vdev) { + printk(KERN_ERR "VP_IDE: out of memory :(\n"); + return -ENOMEM; + } + pci_set_drvdata(dev, vdev); /* * Find the ISA bridge to see how good the IDE is. */ - via_config = via_config_find(&isa); - if (!via_config->id) { - printk(KERN_WARNING "VP_IDE: Unknown VIA SouthBridge, disabling DMA.\n"); - pci_dev_put(isa); - return -ENODEV; - } + vdev->via_config = via_config = via_config_find(&isa); + + /* We checked this earlier so if it fails here deeep badness + is involved */ + + BUG_ON(!via_config->id); /* - * Setup or disable Clk66 if appropriate + * Detect cable and configure Clk66 */ + pci_read_config_dword(dev, VIA_UDMA_TIMING, &u); + + via_cable_detect(vdev, u); if ((via_config->flags & VIA_UDMA) == VIA_UDMA_66) { /* Enable Clk66 */ - pci_read_config_dword(dev, VIA_UDMA_TIMING, &u); pci_write_config_dword(dev, VIA_UDMA_TIMING, u|0x80008); } else if (via_config->flags & VIA_BAD_CLK66) { /* Would cause trouble on 596a and 686 */ - pci_read_config_dword(dev, VIA_UDMA_TIMING, &u); pci_write_config_dword(dev, VIA_UDMA_TIMING, u & ~0x80008); } @@ -367,82 +423,18 @@ static unsigned int __devinit init_chipset_via82cxxx(struct pci_dev *dev, const return 0; } -/* - * Check and handle 80-wire cable presence - */ -static void __devinit via_cable_detect(struct pci_dev *dev, struct via82cxxx_dev *vdev) -{ - unsigned int u; - int i; - pci_read_config_dword(dev, VIA_UDMA_TIMING, &u); - - switch (vdev->via_config->flags & VIA_UDMA) { - - case VIA_UDMA_66: - for (i = 24; i >= 0; i -= 8) - if (((u >> (i & 16)) & 8) && - ((u >> i) & 0x20) && - (((u >> i) & 7) < 2)) { - /* - * 2x PCI clock and - * UDMA w/ < 3T/cycle - */ - vdev->via_80w |= (1 << (1 - (i >> 4))); - } - break; - - case VIA_UDMA_100: - for (i = 24; i >= 0; i -= 8) - if (((u >> i) & 0x10) || - (((u >> i) & 0x20) && - (((u >> i) & 7) < 4))) { - /* BIOS 80-wire bit or - * UDMA w/ < 60ns/cycle - */ - vdev->via_80w |= (1 << (1 - (i >> 4))); - } - break; - - case VIA_UDMA_133: - for (i = 24; i >= 0; i -= 8) - if (((u >> i) & 0x10) || - (((u >> i) & 0x20) && - (((u >> i) & 7) < 6))) { - /* BIOS 80-wire bit or - * UDMA w/ < 60ns/cycle - */ - vdev->via_80w |= (1 << (1 - (i >> 4))); - } - break; - - } -} - static void __devinit init_hwif_via82cxxx(ide_hwif_t *hwif) { - struct via82cxxx_dev *vdev = kmalloc(sizeof(struct via82cxxx_dev), - GFP_KERNEL); - struct pci_dev *isa = NULL; + struct via82cxxx_dev *vdev = pci_get_drvdata(hwif->pci_dev); int i; - if (vdev == NULL) { - printk(KERN_ERR "VP_IDE: out of memory :(\n"); - return; - } - - memset(vdev, 0, sizeof(struct via82cxxx_dev)); - ide_set_hwifdata(hwif, vdev); - - vdev->via_config = via_config_find(&isa); - via_cable_detect(hwif->pci_dev, vdev); - hwif->autodma = 0; hwif->tuneproc = &via82cxxx_tune_drive; hwif->speedproc = &via_set_drive; -#if defined(CONFIG_PPC_CHRP) && defined(CONFIG_PPC32) +#ifdef CONFIG_PPC_CHRP if(machine_is(chrp) && _chrp_type == _CHRP_Pegasos) { hwif->irq = hwif->channel ? 15 : 14; } @@ -494,6 +486,17 @@ static ide_pci_device_t via82cxxx_chipsets[] __devinitdata = { static int __devinit via_init_one(struct pci_dev *dev, const struct pci_device_id *id) { + struct pci_dev *isa = NULL; + struct via_isa_bridge *via_config; + /* + * Find the ISA bridge and check we know what it is. + */ + via_config = via_config_find(&isa); + pci_dev_put(isa); + if (!via_config->id) { + printk(KERN_WARNING "VP_IDE: Unknown VIA SouthBridge, disabling DMA.\n"); + return -ENODEV; + } return ide_setup_pci_device(dev, &via82cxxx_chipsets[id->driver_data]); } |