summaryrefslogtreecommitdiffstats
path: root/drivers/ide/pci
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ide/pci')
-rw-r--r--drivers/ide/pci/Makefile7
-rw-r--r--drivers/ide/pci/aec62xx.c48
-rw-r--r--drivers/ide/pci/alim15x3.c29
-rw-r--r--drivers/ide/pci/amd74xx.c303
-rw-r--r--drivers/ide/pci/atiixp.c109
-rw-r--r--drivers/ide/pci/cmd640.c49
-rw-r--r--drivers/ide/pci/cmd64x.c148
-rw-r--r--drivers/ide/pci/cs5520.c44
-rw-r--r--drivers/ide/pci/cs5530.c12
-rw-r--r--drivers/ide/pci/cs5535.c12
-rw-r--r--drivers/ide/pci/cy82c693.c70
-rw-r--r--drivers/ide/pci/delkin_cb.c45
-rw-r--r--drivers/ide/pci/generic.c25
-rw-r--r--drivers/ide/pci/hpt34x.c25
-rw-r--r--drivers/ide/pci/hpt366.c321
-rw-r--r--drivers/ide/pci/it8213.c48
-rw-r--r--drivers/ide/pci/it821x.c95
-rw-r--r--drivers/ide/pci/jmicron.c11
-rw-r--r--drivers/ide/pci/ns87415.c24
-rw-r--r--drivers/ide/pci/opti621.c17
-rw-r--r--drivers/ide/pci/pdc202xx_new.c93
-rw-r--r--drivers/ide/pci/pdc202xx_old.c67
-rw-r--r--drivers/ide/pci/piix.c81
-rw-r--r--drivers/ide/pci/rz1000.c14
-rw-r--r--drivers/ide/pci/sc1200.c200
-rw-r--r--drivers/ide/pci/scc_pata.c37
-rw-r--r--drivers/ide/pci/serverworks.c75
-rw-r--r--drivers/ide/pci/sgiioc4.c89
-rw-r--r--drivers/ide/pci/siimage.c131
-rw-r--r--drivers/ide/pci/sis5513.c133
-rw-r--r--drivers/ide/pci/sl82c105.c136
-rw-r--r--drivers/ide/pci/slc90e66.c47
-rw-r--r--drivers/ide/pci/tc86c001.c32
-rw-r--r--drivers/ide/pci/triflex.c11
-rw-r--r--drivers/ide/pci/trm290.c94
-rw-r--r--drivers/ide/pci/via82cxxx.c26
36 files changed, 1045 insertions, 1663 deletions
diff --git a/drivers/ide/pci/Makefile b/drivers/ide/pci/Makefile
index 95d1ea8f1f1..02e6ee7d751 100644
--- a/drivers/ide/pci/Makefile
+++ b/drivers/ide/pci/Makefile
@@ -34,6 +34,11 @@ obj-$(CONFIG_BLK_DEV_TRM290) += trm290.o
obj-$(CONFIG_BLK_DEV_VIA82CXXX) += via82cxxx.o
# Must appear at the end of the block
-obj-$(CONFIG_BLK_DEV_GENERIC) += generic.o
+obj-$(CONFIG_BLK_DEV_GENERIC) += ide-pci-generic.o
+ide-pci-generic-y += generic.o
+
+ifeq ($(CONFIG_BLK_DEV_CMD640), m)
+ obj-m += cmd640.o
+endif
EXTRA_CFLAGS := -Idrivers/ide
diff --git a/drivers/ide/pci/aec62xx.c b/drivers/ide/pci/aec62xx.c
index 44268504ae4..cfb3265bc1a 100644
--- a/drivers/ide/pci/aec62xx.c
+++ b/drivers/ide/pci/aec62xx.c
@@ -1,6 +1,4 @@
/*
- * linux/drivers/ide/pci/aec62xx.c Version 0.27 Sep 16, 2007
- *
* Copyright (C) 1999-2002 Andre Hedrick <andre@linux-ide.org>
* Copyright (C) 2007 MontaVista Software, Inc. <source@mvista.com>
*
@@ -9,7 +7,6 @@
#include <linux/module.h>
#include <linux/types.h>
#include <linux/pci.h>
-#include <linux/delay.h>
#include <linux/hdreg.h>
#include <linux/ide.h>
#include <linux/init.h>
@@ -90,7 +87,7 @@ static u8 pci_bus_clock_list_ultra (u8 speed, struct chipset_bus_clock_list_entr
static void aec6210_set_mode(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
u16 d_conf = 0;
u8 ultra = 0, ultra_conf = 0;
u8 tmp0 = 0, tmp1 = 0, tmp2 = 0;
@@ -116,7 +113,7 @@ static void aec6210_set_mode(ide_drive_t *drive, const u8 speed)
static void aec6260_set_mode(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 unit = (drive->select.b.unit & 0x01);
u8 tmp1 = 0, tmp2 = 0;
u8 ultra = 0, drive_conf = 0, ultra_conf = 0;
@@ -168,29 +165,28 @@ static unsigned int __devinit init_chipset_aec62xx(struct pci_dev *dev, const ch
return dev->irq;
}
+static u8 __devinit atp86x_cable_detect(ide_hwif_t *hwif)
+{
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+ u8 ata66 = 0, mask = hwif->channel ? 0x02 : 0x01;
+
+ pci_read_config_byte(dev, 0x49, &ata66);
+
+ return (ata66 & mask) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
+}
+
static void __devinit init_hwif_aec62xx(ide_hwif_t *hwif)
{
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
hwif->set_pio_mode = &aec_set_pio_mode;
if (dev->device == PCI_DEVICE_ID_ARTOP_ATP850UF)
hwif->set_dma_mode = &aec6210_set_mode;
- else
+ else {
hwif->set_dma_mode = &aec6260_set_mode;
- if (hwif->dma_base == 0)
- return;
-
- if (dev->device == PCI_DEVICE_ID_ARTOP_ATP850UF)
- return;
-
- if (hwif->cbl != ATA_CBL_PATA40_SHORT) {
- u8 ata66 = 0, mask = hwif->channel ? 0x02 : 0x01;
-
- pci_read_config_byte(hwif->pci_dev, 0x49, &ata66);
-
- hwif->cbl = (ata66 & mask) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
+ hwif->cable_detect = atp86x_cable_detect;
}
}
@@ -202,6 +198,8 @@ static const struct ide_port_info aec62xx_chipsets[] __devinitdata = {
.enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
.host_flags = IDE_HFLAG_SERIALIZE |
IDE_HFLAG_NO_ATAPI_DMA |
+ IDE_HFLAG_NO_DSC |
+ IDE_HFLAG_ABUSE_SET_DMA_MODE |
IDE_HFLAG_OFF_BOARD,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
@@ -211,6 +209,7 @@ static const struct ide_port_info aec62xx_chipsets[] __devinitdata = {
.init_chipset = init_chipset_aec62xx,
.init_hwif = init_hwif_aec62xx,
.host_flags = IDE_HFLAG_NO_ATAPI_DMA | IDE_HFLAG_NO_AUTODMA |
+ IDE_HFLAG_ABUSE_SET_DMA_MODE |
IDE_HFLAG_OFF_BOARD,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
@@ -220,7 +219,8 @@ static const struct ide_port_info aec62xx_chipsets[] __devinitdata = {
.init_chipset = init_chipset_aec62xx,
.init_hwif = init_hwif_aec62xx,
.enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
- .host_flags = IDE_HFLAG_NO_ATAPI_DMA,
+ .host_flags = IDE_HFLAG_NO_ATAPI_DMA |
+ IDE_HFLAG_ABUSE_SET_DMA_MODE,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = ATA_UDMA4,
@@ -228,7 +228,9 @@ static const struct ide_port_info aec62xx_chipsets[] __devinitdata = {
.name = "AEC6280",
.init_chipset = init_chipset_aec62xx,
.init_hwif = init_hwif_aec62xx,
- .host_flags = IDE_HFLAG_NO_ATAPI_DMA | IDE_HFLAG_OFF_BOARD,
+ .host_flags = IDE_HFLAG_NO_ATAPI_DMA |
+ IDE_HFLAG_ABUSE_SET_DMA_MODE |
+ IDE_HFLAG_OFF_BOARD,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = ATA_UDMA5,
@@ -237,7 +239,9 @@ static const struct ide_port_info aec62xx_chipsets[] __devinitdata = {
.init_chipset = init_chipset_aec62xx,
.init_hwif = init_hwif_aec62xx,
.enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
- .host_flags = IDE_HFLAG_NO_ATAPI_DMA | IDE_HFLAG_OFF_BOARD,
+ .host_flags = IDE_HFLAG_NO_ATAPI_DMA |
+ IDE_HFLAG_ABUSE_SET_DMA_MODE |
+ IDE_HFLAG_OFF_BOARD,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = ATA_UDMA5,
diff --git a/drivers/ide/pci/alim15x3.c b/drivers/ide/pci/alim15x3.c
index ce293936af4..b3b6f514ce2 100644
--- a/drivers/ide/pci/alim15x3.c
+++ b/drivers/ide/pci/alim15x3.c
@@ -1,6 +1,4 @@
/*
- * linux/drivers/ide/pci/alim15x3.c Version 0.29 Sep 16 2007
- *
* Copyright (C) 1998-2000 Michel Aubry, Maintainer
* Copyright (C) 1998-2000 Andrzej Krzysztofowicz, Maintainer
* Copyright (C) 1999-2000 CJ, cjtsai@ali.com.tw, Maintainer
@@ -33,7 +31,6 @@
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/pci.h>
-#include <linux/delay.h>
#include <linux/hdreg.h>
#include <linux/ide.h>
#include <linux/init.h>
@@ -293,7 +290,7 @@ static int ali_get_info (char *buffer, char **addr, off_t offset, int count)
static void ali_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
int s_time, a_time, c_time;
u8 s_clc, a_clc, r_clc;
unsigned long flags;
@@ -396,15 +393,12 @@ static u8 ali_udma_filter(ide_drive_t *drive)
static void ali_set_dma_mode(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 speed1 = speed;
u8 unit = (drive->select.b.unit & 0x01);
u8 tmpbyte = 0x00;
int m5229_udma = (hwif->channel) ? 0x57 : 0x56;
- if (speed < XFER_PIO_0)
- return;
-
if (speed == XFER_UDMA_6)
speed1 = 0x47;
@@ -628,7 +622,7 @@ static int ali_cable_override(struct pci_dev *pdev)
static u8 __devinit ata66_ali15x3(ide_hwif_t *hwif)
{
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
unsigned long flags;
u8 cbl = ATA_CBL_PATA40, tmpbyte;
@@ -671,13 +665,12 @@ static void __devinit init_hwif_common_ali15x3 (ide_hwif_t *hwif)
hwif->set_dma_mode = &ali_set_dma_mode;
hwif->udma_filter = &ali_udma_filter;
+ hwif->cable_detect = ata66_ali15x3;
+
if (hwif->dma_base == 0)
return;
hwif->dma_setup = &ali15x3_dma_setup;
-
- if (hwif->cbl != ATA_CBL_PATA40_SHORT)
- hwif->cbl = ata66_ali15x3(hwif);
}
/**
@@ -691,12 +684,13 @@ static void __devinit init_hwif_common_ali15x3 (ide_hwif_t *hwif)
static void __devinit init_hwif_ali15x3 (ide_hwif_t *hwif)
{
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 ideic, inmir;
s8 irq_routing_table[] = { -1, 9, 3, 10, 4, 5, 7, 6,
1, 11, 0, 12, 0, 14, 0, 15 };
int irq = -1;
- if (hwif->pci_dev->device == PCI_DEVICE_ID_AL_M5229)
+ if (dev->device == PCI_DEVICE_ID_AL_M5229)
hwif->irq = hwif->channel ? 15 : 14;
if (isa_dev) {
@@ -748,7 +742,7 @@ static void __devinit init_dma_ali15x3 (ide_hwif_t *hwif, unsigned long dmabase)
return;
if (!hwif->channel)
outb(inb(dmabase + 2) & 0x60, dmabase + 2);
- ide_setup_dma(hwif, dmabase, 8);
+ ide_setup_dma(hwif, dmabase);
}
static const struct ide_port_info ali15x3_chipset __devinitdata = {
@@ -778,7 +772,7 @@ static int __devinit alim15x3_init_one(struct pci_dev *dev, const struct pci_dev
};
struct ide_port_info d = ali15x3_chipset;
- u8 rev = dev->revision;
+ u8 rev = dev->revision, idx = id->driver_data;
if (pci_dev_present(ati_rs100))
printk(KERN_WARNING "alim15x3: ATI Radeon IGP Northbridge is not yet fully tested.\n");
@@ -801,6 +795,9 @@ static int __devinit alim15x3_init_one(struct pci_dev *dev, const struct pci_dev
d.udma_mask = ATA_UDMA6;
}
+ if (idx == 0)
+ d.host_flags |= IDE_HFLAG_CLEAR_SIMPLEX;
+
#if defined(CONFIG_SPARC64)
d.init_hwif = init_hwif_common_ali15x3;
#endif /* CONFIG_SPARC64 */
@@ -810,7 +807,7 @@ static int __devinit alim15x3_init_one(struct pci_dev *dev, const struct pci_dev
static const struct pci_device_id alim15x3_pci_tbl[] = {
{ PCI_VDEVICE(AL, PCI_DEVICE_ID_AL_M5229), 0 },
- { PCI_VDEVICE(AL, PCI_DEVICE_ID_AL_M5228), 0 },
+ { PCI_VDEVICE(AL, PCI_DEVICE_ID_AL_M5228), 1 },
{ 0, },
};
MODULE_DEVICE_TABLE(pci, alim15x3_pci_tbl);
diff --git a/drivers/ide/pci/amd74xx.c b/drivers/ide/pci/amd74xx.c
index 8d4125ec252..2ef890ce809 100644
--- a/drivers/ide/pci/amd74xx.c
+++ b/drivers/ide/pci/amd74xx.c
@@ -1,6 +1,4 @@
/*
- * Version 2.24
- *
* AMD 755/756/766/8111 and nVidia nForce/2/2s/3/3s/CK804/MCP04
* IDE driver for Linux.
*
@@ -19,90 +17,52 @@
#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <linux/blkdev.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/ide.h>
-#include <asm/io.h>
#include "ide-timing.h"
-#define AMD_IDE_CONFIG (0x01 + amd_config->base)
-#define AMD_CABLE_DETECT (0x02 + amd_config->base)
-#define AMD_DRIVE_TIMING (0x08 + amd_config->base)
-#define AMD_8BIT_TIMING (0x0e + amd_config->base)
-#define AMD_ADDRESS_SETUP (0x0c + amd_config->base)
-#define AMD_UDMA_TIMING (0x10 + amd_config->base)
-
-#define AMD_CHECK_SWDMA 0x08
-#define AMD_BAD_SWDMA 0x10
-#define AMD_BAD_FIFO 0x20
-#define AMD_CHECK_SERENADE 0x40
-
-/*
- * AMD SouthBridge chips.
- */
-
-static struct amd_ide_chip {
- unsigned short id;
- u8 base;
- u8 udma_mask;
- u8 flags;
-} amd_ide_chips[] = {
- { PCI_DEVICE_ID_AMD_COBRA_7401, 0x40, ATA_UDMA2, AMD_BAD_SWDMA },
- { PCI_DEVICE_ID_AMD_VIPER_7409, 0x40, ATA_UDMA4, AMD_CHECK_SWDMA },
- { PCI_DEVICE_ID_AMD_VIPER_7411, 0x40, ATA_UDMA5, AMD_BAD_FIFO },
- { PCI_DEVICE_ID_AMD_OPUS_7441, 0x40, ATA_UDMA5, },
- { PCI_DEVICE_ID_AMD_8111_IDE, 0x40, ATA_UDMA6, AMD_CHECK_SERENADE },
- { PCI_DEVICE_ID_NVIDIA_NFORCE_IDE, 0x50, ATA_UDMA5, },
- { PCI_DEVICE_ID_NVIDIA_NFORCE2_IDE, 0x50, ATA_UDMA6, },
- { PCI_DEVICE_ID_NVIDIA_NFORCE2S_IDE, 0x50, ATA_UDMA6, },
- { PCI_DEVICE_ID_NVIDIA_NFORCE2S_SATA, 0x50, ATA_UDMA6, },
- { PCI_DEVICE_ID_NVIDIA_NFORCE3_IDE, 0x50, ATA_UDMA6, },
- { PCI_DEVICE_ID_NVIDIA_NFORCE3S_IDE, 0x50, ATA_UDMA6, },
- { PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA, 0x50, ATA_UDMA6, },
- { PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA2, 0x50, ATA_UDMA6, },
- { PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_IDE, 0x50, ATA_UDMA6, },
- { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_IDE, 0x50, ATA_UDMA6, },
- { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_IDE, 0x50, ATA_UDMA6, },
- { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_IDE, 0x50, ATA_UDMA6, },
- { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_IDE, 0x50, ATA_UDMA6, },
- { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP65_IDE, 0x50, ATA_UDMA6, },
- { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP67_IDE, 0x50, ATA_UDMA6, },
- { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP73_IDE, 0x50, ATA_UDMA6, },
- { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP77_IDE, 0x50, ATA_UDMA6, },
- { PCI_DEVICE_ID_AMD_CS5536_IDE, 0x40, ATA_UDMA5, },
- { 0 }
+enum {
+ AMD_IDE_CONFIG = 0x41,
+ AMD_CABLE_DETECT = 0x42,
+ AMD_DRIVE_TIMING = 0x48,
+ AMD_8BIT_TIMING = 0x4e,
+ AMD_ADDRESS_SETUP = 0x4c,
+ AMD_UDMA_TIMING = 0x50,
};
-static struct amd_ide_chip *amd_config;
-static const struct ide_port_info *amd_chipset;
static unsigned int amd_80w;
static unsigned int amd_clock;
static char *amd_dma[] = { "16", "25", "33", "44", "66", "100", "133" };
static unsigned char amd_cyc2udma[] = { 6, 6, 5, 4, 0, 1, 1, 2, 2, 3, 3, 3, 3, 3, 3, 7 };
+static inline u8 amd_offset(struct pci_dev *dev)
+{
+ return (dev->vendor == PCI_VENDOR_ID_NVIDIA) ? 0x10 : 0;
+}
+
/*
* amd_set_speed() writes timing values to the chipset registers
*/
-static void amd_set_speed(struct pci_dev *dev, unsigned char dn, struct ide_timing *timing)
+static void amd_set_speed(struct pci_dev *dev, u8 dn, u8 udma_mask,
+ struct ide_timing *timing)
{
- unsigned char t;
+ u8 t = 0, offset = amd_offset(dev);
- pci_read_config_byte(dev, AMD_ADDRESS_SETUP, &t);
+ pci_read_config_byte(dev, AMD_ADDRESS_SETUP + offset, &t);
t = (t & ~(3 << ((3 - dn) << 1))) | ((FIT(timing->setup, 1, 4) - 1) << ((3 - dn) << 1));
- pci_write_config_byte(dev, AMD_ADDRESS_SETUP, t);
+ pci_write_config_byte(dev, AMD_ADDRESS_SETUP + offset, t);
- pci_write_config_byte(dev, AMD_8BIT_TIMING + (1 - (dn >> 1)),
+ pci_write_config_byte(dev, AMD_8BIT_TIMING + offset + (1 - (dn >> 1)),
((FIT(timing->act8b, 1, 16) - 1) << 4) | (FIT(timing->rec8b, 1, 16) - 1));
- pci_write_config_byte(dev, AMD_DRIVE_TIMING + (3 - dn),
+ pci_write_config_byte(dev, AMD_DRIVE_TIMING + offset + (3 - dn),
((FIT(timing->active, 1, 16) - 1) << 4) | (FIT(timing->recover, 1, 16) - 1));
- switch (amd_config->udma_mask) {
+ switch (udma_mask) {
case ATA_UDMA2: t = timing->udma ? (0xc0 | (FIT(timing->udma, 2, 5) - 2)) : 0x03; break;
case ATA_UDMA4: t = timing->udma ? (0xc0 | amd_cyc2udma[FIT(timing->udma, 2, 10)]) : 0x03; break;
case ATA_UDMA5: t = timing->udma ? (0xc0 | amd_cyc2udma[FIT(timing->udma, 1, 10)]) : 0x03; break;
@@ -110,7 +70,7 @@ static void amd_set_speed(struct pci_dev *dev, unsigned char dn, struct ide_timi
default: return;
}
- pci_write_config_byte(dev, AMD_UDMA_TIMING + (3 - dn), t);
+ pci_write_config_byte(dev, AMD_UDMA_TIMING + offset + (3 - dn), t);
}
/*
@@ -120,12 +80,15 @@ static void amd_set_speed(struct pci_dev *dev, unsigned char dn, struct ide_timi
static void amd_set_drive(ide_drive_t *drive, const u8 speed)
{
- ide_drive_t *peer = HWIF(drive)->drives + (~drive->dn & 1);
+ ide_hwif_t *hwif = drive->hwif;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+ ide_drive_t *peer = hwif->drives + (~drive->dn & 1);
struct ide_timing t, p;
int T, UT;
+ u8 udma_mask = hwif->ultra_mask;
T = 1000000000 / amd_clock;
- UT = (amd_config->udma_mask == ATA_UDMA2) ? T : (T / 2);
+ UT = (udma_mask == ATA_UDMA2) ? T : (T / 2);
ide_timing_compute(drive, speed, &t, T, UT);
@@ -137,7 +100,7 @@ static void amd_set_drive(ide_drive_t *drive, const u8 speed)
if (speed == XFER_UDMA_5 && amd_clock <= 33333) t.udma = 1;
if (speed == XFER_UDMA_6 && amd_clock <= 33333) t.udma = 15;
- amd_set_speed(HWIF(drive)->pci_dev, drive->dn, &t);
+ amd_set_speed(dev, drive->dn, udma_mask, &t);
}
/*
@@ -149,67 +112,68 @@ static void amd_set_pio_mode(ide_drive_t *drive, const u8 pio)
amd_set_drive(drive, XFER_PIO_0 + pio);
}
-/*
- * The initialization callback. Here we determine the IDE chip type
- * and initialize its drive independent registers.
- */
+static void __devinit amd7409_cable_detect(struct pci_dev *dev,
+ const char *name)
+{
+ /* no host side cable detection */
+ amd_80w = 0x03;
+}
-static unsigned int __devinit init_chipset_amd74xx(struct pci_dev *dev, const char *name)
+static void __devinit amd7411_cable_detect(struct pci_dev *dev,
+ const char *name)
{
- unsigned char t;
- unsigned int u;
int i;
+ u32 u = 0;
+ u8 t = 0, offset = amd_offset(dev);
+
+ pci_read_config_byte(dev, AMD_CABLE_DETECT + offset, &t);
+ pci_read_config_dword(dev, AMD_UDMA_TIMING + offset, &u);
+ amd_80w = ((t & 0x3) ? 1 : 0) | ((t & 0xc) ? 2 : 0);
+ for (i = 24; i >= 0; i -= 8)
+ if (((u >> i) & 4) && !(amd_80w & (1 << (1 - (i >> 4))))) {
+ printk(KERN_WARNING "%s: BIOS didn't set cable bits "
+ "correctly. Enabling workaround.\n",
+ name);
+ amd_80w |= (1 << (1 - (i >> 4)));
+ }
+}
/*
- * Check for bad SWDMA.
+ * The initialization callback. Initialize drive independent registers.
*/
- if (amd_config->flags & AMD_CHECK_SWDMA) {
- if (dev->revision <= 7)
- amd_config->flags |= AMD_BAD_SWDMA;
- }
+static unsigned int __devinit init_chipset_amd74xx(struct pci_dev *dev,
+ const char *name)
+{
+ u8 t = 0, offset = amd_offset(dev);
/*
* Check 80-wire cable presence.
*/
- switch (amd_config->udma_mask) {
-
- case ATA_UDMA6:
- case ATA_UDMA5:
- pci_read_config_byte(dev, AMD_CABLE_DETECT, &t);
- pci_read_config_dword(dev, AMD_UDMA_TIMING, &u);
- amd_80w = ((t & 0x3) ? 1 : 0) | ((t & 0xc) ? 2 : 0);
- for (i = 24; i >= 0; i -= 8)
- if (((u >> i) & 4) && !(amd_80w & (1 << (1 - (i >> 4))))) {
- printk(KERN_WARNING "%s: BIOS didn't set cable bits correctly. Enabling workaround.\n",
- amd_chipset->name);
- amd_80w |= (1 << (1 - (i >> 4)));
- }
- break;
-
- case ATA_UDMA4:
- /* no host side cable detection */
- amd_80w = 0x03;
- break;
- }
+ if (dev->vendor == PCI_VENDOR_ID_AMD &&
+ dev->device == PCI_DEVICE_ID_AMD_COBRA_7401)
+ ; /* no UDMA > 2 */
+ else if (dev->vendor == PCI_VENDOR_ID_AMD &&
+ dev->device == PCI_DEVICE_ID_AMD_VIPER_7409)
+ amd7409_cable_detect(dev, name);
+ else
+ amd7411_cable_detect(dev, name);
/*
* Take care of prefetch & postwrite.
*/
- pci_read_config_byte(dev, AMD_IDE_CONFIG, &t);
- pci_write_config_byte(dev, AMD_IDE_CONFIG,
- (amd_config->flags & AMD_BAD_FIFO) ? (t & 0x0f) : (t | 0xf0));
-
-/*
- * Take care of incorrectly wired Serenade mainboards.
- */
-
- if ((amd_config->flags & AMD_CHECK_SERENADE) &&
- dev->subsystem_vendor == PCI_VENDOR_ID_AMD &&
- dev->subsystem_device == PCI_DEVICE_ID_AMD_SERENADE)
- amd_config->udma_mask = ATA_UDMA5;
+ pci_read_config_byte(dev, AMD_IDE_CONFIG + offset, &t);
+ /*
+ * Check for broken FIFO support.
+ */
+ if (dev->vendor == PCI_VENDOR_ID_AMD &&
+ dev->vendor == PCI_DEVICE_ID_AMD_VIPER_7411)
+ t &= 0x0f;
+ else
+ t |= 0xf0;
+ pci_write_config_byte(dev, AMD_IDE_CONFIG + offset, t);
/*
* Determine the system bus clock.
@@ -225,53 +189,44 @@ static unsigned int __devinit init_chipset_amd74xx(struct pci_dev *dev, const ch
if (amd_clock < 20000 || amd_clock > 50000) {
printk(KERN_WARNING "%s: User given PCI clock speed impossible (%d), using 33 MHz instead.\n",
- amd_chipset->name, amd_clock);
+ name, amd_clock);
amd_clock = 33333;
}
-/*
- * Print the boot message.
- */
-
- printk(KERN_INFO "%s: %s (rev %02x) UDMA%s controller\n",
- amd_chipset->name, pci_name(dev), dev->revision,
- amd_dma[fls(amd_config->udma_mask) - 1]);
-
return dev->irq;
}
+static u8 __devinit amd_cable_detect(ide_hwif_t *hwif)
+{
+ if ((amd_80w >> hwif->channel) & 1)
+ return ATA_CBL_PATA80;
+ else
+ return ATA_CBL_PATA40;
+}
+
static void __devinit init_hwif_amd74xx(ide_hwif_t *hwif)
{
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+
if (hwif->irq == 0) /* 0 is bogus but will do for now */
- hwif->irq = pci_get_legacy_ide_irq(hwif->pci_dev, hwif->channel);
+ hwif->irq = pci_get_legacy_ide_irq(dev, hwif->channel);
hwif->set_pio_mode = &amd_set_pio_mode;
hwif->set_dma_mode = &amd_set_drive;
- if (!hwif->dma_base)
- return;
-
- hwif->ultra_mask = amd_config->udma_mask;
- if (amd_config->flags & AMD_BAD_SWDMA)
- hwif->swdma_mask = 0x00;
-
- if (hwif->cbl != ATA_CBL_PATA40_SHORT) {
- if ((amd_80w >> hwif->channel) & 1)
- hwif->cbl = ATA_CBL_PATA80;
- else
- hwif->cbl = ATA_CBL_PATA40;
- }
+ hwif->cable_detect = amd_cable_detect;
}
#define IDE_HFLAGS_AMD \
(IDE_HFLAG_PIO_NO_BLACKLIST | \
IDE_HFLAG_PIO_NO_DOWNGRADE | \
+ IDE_HFLAG_ABUSE_SET_DMA_MODE | \
IDE_HFLAG_POST_SET_MODE | \
IDE_HFLAG_IO_32BIT | \
IDE_HFLAG_UNMASK_IRQS | \
IDE_HFLAG_BOOTABLE)
-#define DECLARE_AMD_DEV(name_str) \
+#define DECLARE_AMD_DEV(name_str, swdma, udma) \
{ \
.name = name_str, \
.init_chipset = init_chipset_amd74xx, \
@@ -279,11 +234,12 @@ static void __devinit init_hwif_amd74xx(ide_hwif_t *hwif)
.enablebits = {{0x40,0x02,0x02}, {0x40,0x01,0x01}}, \
.host_flags = IDE_HFLAGS_AMD, \
.pio_mask = ATA_PIO5, \
- .swdma_mask = ATA_SWDMA2, \
+ .swdma_mask = swdma, \
.mwdma_mask = ATA_MWDMA2, \
+ .udma_mask = udma, \
}
-#define DECLARE_NV_DEV(name_str) \
+#define DECLARE_NV_DEV(name_str, udma) \
{ \
.name = name_str, \
.init_chipset = init_chipset_amd74xx, \
@@ -293,45 +249,62 @@ static void __devinit init_hwif_amd74xx(ide_hwif_t *hwif)
.pio_mask = ATA_PIO5, \
.swdma_mask = ATA_SWDMA2, \
.mwdma_mask = ATA_MWDMA2, \
+ .udma_mask = udma, \
}
static const struct ide_port_info amd74xx_chipsets[] __devinitdata = {
- /* 0 */ DECLARE_AMD_DEV("AMD7401"),
- /* 1 */ DECLARE_AMD_DEV("AMD7409"),
- /* 2 */ DECLARE_AMD_DEV("AMD7411"),
- /* 3 */ DECLARE_AMD_DEV("AMD7441"),
- /* 4 */ DECLARE_AMD_DEV("AMD8111"),
-
- /* 5 */ DECLARE_NV_DEV("NFORCE"),
- /* 6 */ DECLARE_NV_DEV("NFORCE2"),
- /* 7 */ DECLARE_NV_DEV("NFORCE2-U400R"),
- /* 8 */ DECLARE_NV_DEV("NFORCE2-U400R-SATA"),
- /* 9 */ DECLARE_NV_DEV("NFORCE3-150"),
- /* 10 */ DECLARE_NV_DEV("NFORCE3-250"),
- /* 11 */ DECLARE_NV_DEV("NFORCE3-250-SATA"),
- /* 12 */ DECLARE_NV_DEV("NFORCE3-250-SATA2"),
- /* 13 */ DECLARE_NV_DEV("NFORCE-CK804"),
- /* 14 */ DECLARE_NV_DEV("NFORCE-MCP04"),
- /* 15 */ DECLARE_NV_DEV("NFORCE-MCP51"),
- /* 16 */ DECLARE_NV_DEV("NFORCE-MCP55"),
- /* 17 */ DECLARE_NV_DEV("NFORCE-MCP61"),
- /* 18 */ DECLARE_NV_DEV("NFORCE-MCP65"),
- /* 19 */ DECLARE_NV_DEV("NFORCE-MCP67"),
- /* 20 */ DECLARE_NV_DEV("NFORCE-MCP73"),
- /* 21 */ DECLARE_NV_DEV("NFORCE-MCP77"),
- /* 22 */ DECLARE_AMD_DEV("AMD5536"),
+ /* 0 */ DECLARE_AMD_DEV("AMD7401", 0x00, ATA_UDMA2),
+ /* 1 */ DECLARE_AMD_DEV("AMD7409", ATA_SWDMA2, ATA_UDMA4),
+ /* 2 */ DECLARE_AMD_DEV("AMD7411", ATA_SWDMA2, ATA_UDMA5),
+ /* 3 */ DECLARE_AMD_DEV("AMD7441", ATA_SWDMA2, ATA_UDMA5),
+ /* 4 */ DECLARE_AMD_DEV("AMD8111", ATA_SWDMA2, ATA_UDMA6),
+
+ /* 5 */ DECLARE_NV_DEV("NFORCE", ATA_UDMA5),
+ /* 6 */ DECLARE_NV_DEV("NFORCE2", ATA_UDMA6),
+ /* 7 */ DECLARE_NV_DEV("NFORCE2-U400R", ATA_UDMA6),
+ /* 8 */ DECLARE_NV_DEV("NFORCE2-U400R-SATA", ATA_UDMA6),
+ /* 9 */ DECLARE_NV_DEV("NFORCE3-150", ATA_UDMA6),
+ /* 10 */ DECLARE_NV_DEV("NFORCE3-250", ATA_UDMA6),
+ /* 11 */ DECLARE_NV_DEV("NFORCE3-250-SATA", ATA_UDMA6),
+ /* 12 */ DECLARE_NV_DEV("NFORCE3-250-SATA2", ATA_UDMA6),
+ /* 13 */ DECLARE_NV_DEV("NFORCE-CK804", ATA_UDMA6),
+ /* 14 */ DECLARE_NV_DEV("NFORCE-MCP04", ATA_UDMA6),
+ /* 15 */ DECLARE_NV_DEV("NFORCE-MCP51", ATA_UDMA6),
+ /* 16 */ DECLARE_NV_DEV("NFORCE-MCP55", ATA_UDMA6),
+ /* 17 */ DECLARE_NV_DEV("NFORCE-MCP61", ATA_UDMA6),
+ /* 18 */ DECLARE_NV_DEV("NFORCE-MCP65", ATA_UDMA6),
+ /* 19 */ DECLARE_NV_DEV("NFORCE-MCP67", ATA_UDMA6),
+ /* 20 */ DECLARE_NV_DEV("NFORCE-MCP73", ATA_UDMA6),
+ /* 21 */ DECLARE_NV_DEV("NFORCE-MCP77", ATA_UDMA6),
+
+ /* 22 */ DECLARE_AMD_DEV("AMD5536", ATA_SWDMA2, ATA_UDMA5),
};
static int __devinit amd74xx_probe(struct pci_dev *dev, const struct pci_device_id *id)
{
- amd_chipset = amd74xx_chipsets + id->driver_data;
- amd_config = amd_ide_chips + id->driver_data;
- if (dev->device != amd_config->id) {
- printk(KERN_ERR "%s: assertion 0x%02x == 0x%02x failed !\n",
- pci_name(dev), dev->device, amd_config->id);
- return -ENODEV;
+ struct ide_port_info d;
+ u8 idx = id->driver_data;
+
+ d = amd74xx_chipsets[idx];
+
+ /*
+ * Check for bad SWDMA and incorrectly wired Serenade mainboards.
+ */
+ if (idx == 1) {
+ if (dev->revision <= 7)
+ d.swdma_mask = 0;
+ d.host_flags |= IDE_HFLAG_CLEAR_SIMPLEX;
+ } else if (idx == 4) {
+ if (dev->subsystem_vendor == PCI_VENDOR_ID_AMD &&
+ dev->subsystem_device == PCI_DEVICE_ID_AMD_SERENADE)
+ d.udma_mask = ATA_UDMA5;
}
- return ide_setup_pci_device(dev, amd_chipset);
+
+ printk(KERN_INFO "%s: %s (rev %02x) UDMA%s controller\n",
+ d.name, pci_name(dev), dev->revision,
+ amd_dma[fls(d.udma_mask) - 1]);
+
+ return ide_setup_pci_device(dev, &d);
}
static const struct pci_device_id amd74xx_pci_tbl[] = {
diff --git a/drivers/ide/pci/atiixp.c b/drivers/ide/pci/atiixp.c
index ef8e0164ef7..7e037c880cb 100644
--- a/drivers/ide/pci/atiixp.c
+++ b/drivers/ide/pci/atiixp.c
@@ -1,6 +1,4 @@
/*
- * linux/drivers/ide/pci/atiixp.c Version 0.03 Aug 3 2007
- *
* Copyright (C) 2003 ATI Inc. <hyu@ati.com>
* Copyright (C) 2004,2007 Bartlomiej Zolnierkiewicz
*/
@@ -8,15 +6,11 @@
#include <linux/types.h>
#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/ioport.h>
#include <linux/pci.h>
#include <linux/hdreg.h>
#include <linux/ide.h>
-#include <linux/delay.h>
#include <linux/init.h>
-#include <asm/io.h>
-
#define ATIIXP_IDE_PIO_TIMING 0x40
#define ATIIXP_IDE_MDMA_TIMING 0x44
#define ATIIXP_IDE_PIO_CONTROL 0x48
@@ -43,47 +37,8 @@ static atiixp_ide_timing mdma_timing[] = {
{ 0x02, 0x00 },
};
-static int save_mdma_mode[4];
-
static DEFINE_SPINLOCK(atiixp_lock);
-static void atiixp_dma_host_on(ide_drive_t *drive)
-{
- struct pci_dev *dev = drive->hwif->pci_dev;
- unsigned long flags;
- u16 tmp16;
-
- spin_lock_irqsave(&atiixp_lock, flags);
-
- pci_read_config_word(dev, ATIIXP_IDE_UDMA_CONTROL, &tmp16);
- if (save_mdma_mode[drive->dn])
- tmp16 &= ~(1 << drive->dn);
- else
- tmp16 |= (1 << drive->dn);
- pci_write_config_word(dev, ATIIXP_IDE_UDMA_CONTROL, tmp16);
-
- spin_unlock_irqrestore(&atiixp_lock, flags);
-
- ide_dma_host_on(drive);
-}
-
-static void atiixp_dma_host_off(ide_drive_t *drive)
-{
- struct pci_dev *dev = drive->hwif->pci_dev;
- unsigned long flags;
- u16 tmp16;
-
- spin_lock_irqsave(&atiixp_lock, flags);
-
- pci_read_config_word(dev, ATIIXP_IDE_UDMA_CONTROL, &tmp16);
- tmp16 &= ~(1 << drive->dn);
- pci_write_config_word(dev, ATIIXP_IDE_UDMA_CONTROL, tmp16);
-
- spin_unlock_irqrestore(&atiixp_lock, flags);
-
- ide_dma_host_off(drive);
-}
-
/**
* atiixp_set_pio_mode - set host controller for PIO mode
* @drive: drive
@@ -94,7 +49,7 @@ static void atiixp_dma_host_off(ide_drive_t *drive)
static void atiixp_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
- struct pci_dev *dev = drive->hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
unsigned long flags;
int timing_shift = (drive->dn & 2) ? 16 : 0 + (drive->dn & 1) ? 0 : 8;
u32 pio_timing_data;
@@ -127,37 +82,54 @@ static void atiixp_set_pio_mode(ide_drive_t *drive, const u8 pio)
static void atiixp_set_dma_mode(ide_drive_t *drive, const u8 speed)
{
- struct pci_dev *dev = drive->hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
unsigned long flags;
int timing_shift = (drive->dn & 2) ? 16 : 0 + (drive->dn & 1) ? 0 : 8;
u32 tmp32;
u16 tmp16;
-
- if (speed < XFER_MW_DMA_0)
- return;
+ u16 udma_ctl = 0;
spin_lock_irqsave(&atiixp_lock, flags);
- save_mdma_mode[drive->dn] = 0;
+ pci_read_config_word(dev, ATIIXP_IDE_UDMA_CONTROL, &udma_ctl);
+
if (speed >= XFER_UDMA_0) {
pci_read_config_word(dev, ATIIXP_IDE_UDMA_MODE, &tmp16);
tmp16 &= ~(0x07 << (drive->dn * 4));
tmp16 |= ((speed & 0x07) << (drive->dn * 4));
pci_write_config_word(dev, ATIIXP_IDE_UDMA_MODE, tmp16);
- } else {
- if ((speed >= XFER_MW_DMA_0) && (speed <= XFER_MW_DMA_2)) {
- save_mdma_mode[drive->dn] = speed;
- pci_read_config_dword(dev, ATIIXP_IDE_MDMA_TIMING, &tmp32);
- tmp32 &= ~(0xff << timing_shift);
- tmp32 |= (mdma_timing[speed & 0x03].recover_width << timing_shift) |
- (mdma_timing[speed & 0x03].command_width << (timing_shift + 4));
- pci_write_config_dword(dev, ATIIXP_IDE_MDMA_TIMING, tmp32);
- }
+
+ udma_ctl |= (1 << drive->dn);
+ } else if (speed >= XFER_MW_DMA_0) {
+ u8 i = speed & 0x03;
+
+ pci_read_config_dword(dev, ATIIXP_IDE_MDMA_TIMING, &tmp32);
+ tmp32 &= ~(0xff << timing_shift);
+ tmp32 |= (mdma_timing[i].recover_width << timing_shift) |
+ (mdma_timing[i].command_width << (timing_shift + 4));
+ pci_write_config_dword(dev, ATIIXP_IDE_MDMA_TIMING, tmp32);
+
+ udma_ctl &= ~(1 << drive->dn);
}
+ pci_write_config_word(dev, ATIIXP_IDE_UDMA_CONTROL, udma_ctl);
+
spin_unlock_irqrestore(&atiixp_lock, flags);
}
+static u8 __devinit atiixp_cable_detect(ide_hwif_t *hwif)
+{
+ struct pci_dev *pdev = to_pci_dev(hwif->dev);
+ u8 udma_mode = 0, ch = hwif->channel;
+
+ pci_read_config_byte(pdev, ATIIXP_IDE_UDMA_MODE + ch, &udma_mode);
+
+ if ((udma_mode & 0x07) >= 0x04 || (udma_mode & 0x70) >= 0x40)
+ return ATA_CBL_PATA80;
+ else
+ return ATA_CBL_PATA40;
+}
+
/**
* init_hwif_atiixp - fill in the hwif for the ATIIXP
* @hwif: IDE interface
@@ -168,25 +140,10 @@ static void atiixp_set_dma_mode(ide_drive_t *drive, const u8 speed)
static void __devinit init_hwif_atiixp(ide_hwif_t *hwif)
{
- u8 udma_mode = 0;
- u8 ch = hwif->channel;
- struct pci_dev *pdev = hwif->pci_dev;
-
hwif->set_pio_mode = &atiixp_set_pio_mode;
hwif->set_dma_mode = &atiixp_set_dma_mode;
- if (!hwif->dma_base)
- return;
-
- pci_read_config_byte(pdev, ATIIXP_IDE_UDMA_MODE + ch, &udma_mode);
-
- if ((udma_mode & 0x07) >= 0x04 || (udma_mode & 0x70) >= 0x40)
- hwif->cbl = ATA_CBL_PATA80;
- else
- hwif->cbl = ATA_CBL_PATA40;
-
- hwif->dma_host_on = &atiixp_dma_host_on;
- hwif->dma_host_off = &atiixp_dma_host_off;
+ hwif->cable_detect = atiixp_cable_detect;
}
static const struct ide_port_info atiixp_pci_info[] __devinitdata = {
diff --git a/drivers/ide/pci/cmd640.c b/drivers/ide/pci/cmd640.c
index 4aa48104e0c..bd24dad3cfc 100644
--- a/drivers/ide/pci/cmd640.c
+++ b/drivers/ide/pci/cmd640.c
@@ -1,6 +1,4 @@
/*
- * linux/drivers/ide/pci/cmd640.c Version 1.02 Sep 01, 1996
- *
* Copyright (C) 1995-1996 Linus Torvalds & authors (see below)
*/
@@ -105,10 +103,6 @@
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/ioport.h>
-#include <linux/blkdev.h>
#include <linux/hdreg.h>
#include <linux/ide.h>
#include <linux/init.h>
@@ -705,10 +699,22 @@ static int pci_conf2(void)
return 0;
}
+static const struct ide_port_info cmd640_port_info __initdata = {
+ .chipset = ide_cmd640,
+ .host_flags = IDE_HFLAG_SERIALIZE |
+ IDE_HFLAG_NO_DMA |
+ IDE_HFLAG_NO_AUTOTUNE |
+ IDE_HFLAG_ABUSE_PREFETCH |
+ IDE_HFLAG_ABUSE_FAST_DEVSEL,
+#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
+ .pio_mask = ATA_PIO5,
+#endif
+};
+
/*
- * Probe for a cmd640 chipset, and initialize it if found. Called from ide.c
+ * Probe for a cmd640 chipset, and initialize it if found.
*/
-int __init ide_probe_for_cmd640x (void)
+static int __init cmd640x_init(void)
{
#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
int second_port_toggled = 0;
@@ -717,6 +723,7 @@ int __init ide_probe_for_cmd640x (void)
const char *bus_type, *port2;
unsigned int index;
u8 b, cfr;
+ u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
if (cmd640_vlb && probe_for_cmd640_vlb()) {
bus_type = "VLB";
@@ -761,14 +768,12 @@ int __init ide_probe_for_cmd640x (void)
setup_device_ptrs ();
printk("%s: buggy cmd640%c interface on %s, config=0x%02x\n",
cmd_hwif0->name, 'a' + cmd640_chip_version - 1, bus_type, cfr);
- cmd_hwif0->chipset = ide_cmd640;
#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
- cmd_hwif0->host_flags = IDE_HFLAG_ABUSE_PREFETCH |
- IDE_HFLAG_ABUSE_FAST_DEVSEL;
- cmd_hwif0->pio_mask = ATA_PIO5;
cmd_hwif0->set_pio_mode = &cmd640_set_pio_mode;
#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
+ idx[0] = cmd_hwif0->index;
+
/*
* Ensure compatibility by always using the slowest timings
* for access to the drive's command register block,
@@ -814,21 +819,14 @@ int __init ide_probe_for_cmd640x (void)
* Initialize data for secondary cmd640 port, if enabled
*/
if (second_port_cmd640) {
- cmd_hwif0->serialized = 1;
- cmd_hwif1->serialized = 1;
- cmd_hwif1->chipset = ide_cmd640;
- cmd_hwif0->mate = cmd_hwif1;
- cmd_hwif1->mate = cmd_hwif0;
- cmd_hwif1->channel = 1;
#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
- cmd_hwif1->host_flags = IDE_HFLAG_ABUSE_PREFETCH |
- IDE_HFLAG_ABUSE_FAST_DEVSEL;
- cmd_hwif1->pio_mask = ATA_PIO5;
cmd_hwif1->set_pio_mode = &cmd640_set_pio_mode;
#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
+
+ idx[1] = cmd_hwif1->index;
}
printk(KERN_INFO "%s: %sserialized, secondary interface %s\n", cmd_hwif1->name,
- cmd_hwif0->serialized ? "" : "not ", port2);
+ second_port_cmd640 ? "" : "not ", port2);
/*
* Establish initial timings/prefetch for all drives.
@@ -872,6 +870,13 @@ int __init ide_probe_for_cmd640x (void)
#ifdef CMD640_DUMP_REGS
cmd640_dump_regs();
#endif
+
+ ide_device_add(idx, &cmd640_port_info);
+
return 1;
}
+module_param_named(probe_vlb, cmd640_vlb, bool, 0);
+MODULE_PARM_DESC(probe_vlb, "probe for VLB version of CMD640 chipset");
+
+module_init(cmd640x_init);
diff --git a/drivers/ide/pci/cmd64x.c b/drivers/ide/pci/cmd64x.c
index bc553337b1b..edabe6299ef 100644
--- a/drivers/ide/pci/cmd64x.c
+++ b/drivers/ide/pci/cmd64x.c
@@ -1,6 +1,4 @@
/*
- * linux/drivers/ide/pci/cmd64x.c Version 1.52 Dec 24, 2007
- *
* cmd64x.c: Enable interrupts at initialization time on Ultra/PCI machines.
* Due to massive hardware bugs, UltraDMA is only supported
* on the 646U2 and not on the 646U.
@@ -15,15 +13,12 @@
#include <linux/module.h>
#include <linux/types.h>
#include <linux/pci.h>
-#include <linux/delay.h>
#include <linux/hdreg.h>
#include <linux/ide.h>
#include <linux/init.h>
#include <asm/io.h>
-#define DISPLAY_CMD64X_TIMINGS
-
#define CMD_DEBUG 0
#if CMD_DEBUG
@@ -37,11 +32,6 @@
*/
#define CFR 0x50
#define CFR_INTR_CH0 0x04
-#define CNTRL 0x51
-#define CNTRL_ENA_1ST 0x04
-#define CNTRL_ENA_2ND 0x08
-#define CNTRL_DIS_RA0 0x40
-#define CNTRL_DIS_RA1 0x80
#define CMDTIM 0x52
#define ARTTIM0 0x53
@@ -60,108 +50,13 @@
#define MRDMODE 0x71
#define MRDMODE_INTR_CH0 0x04
#define MRDMODE_INTR_CH1 0x08
-#define MRDMODE_BLK_CH0 0x10
-#define MRDMODE_BLK_CH1 0x20
-#define BMIDESR0 0x72
#define UDIDETCR0 0x73
#define DTPR0 0x74
#define BMIDECR1 0x78
#define BMIDECSR 0x79
-#define BMIDESR1 0x7A
#define UDIDETCR1 0x7B
#define DTPR1 0x7C
-#if defined(DISPLAY_CMD64X_TIMINGS) && defined(CONFIG_IDE_PROC_FS)
-#include <linux/stat.h>
-#include <linux/proc_fs.h>
-
-static u8 cmd64x_proc = 0;
-
-#define CMD_MAX_DEVS 5
-
-static struct pci_dev *cmd_devs[CMD_MAX_DEVS];
-static int n_cmd_devs;
-
-static char * print_cmd64x_get_info (char *buf, struct pci_dev *dev, int index)
-{
- char *p = buf;
- u8 reg72 = 0, reg73 = 0; /* primary */
- u8 reg7a = 0, reg7b = 0; /* secondary */
- u8 reg50 = 1, reg51 = 1, reg57 = 0, reg71 = 0; /* extra */
-
- p += sprintf(p, "\nController: %d\n", index);
- p += sprintf(p, "PCI-%x Chipset.\n", dev->device);
-
- (void) pci_read_config_byte(dev, CFR, &reg50);
- (void) pci_read_config_byte(dev, CNTRL, &reg51);
- (void) pci_read_config_byte(dev, ARTTIM23, &reg57);
- (void) pci_read_config_byte(dev, MRDMODE, &reg71);
- (void) pci_read_config_byte(dev, BMIDESR0, &reg72);
- (void) pci_read_config_byte(dev, UDIDETCR0, &reg73);
- (void) pci_read_config_byte(dev, BMIDESR1, &reg7a);
- (void) pci_read_config_byte(dev, UDIDETCR1, &reg7b);
-
- /* PCI0643/6 originally didn't have the primary channel enable bit */
- if ((dev->device == PCI_DEVICE_ID_CMD_643) ||
- (dev->device == PCI_DEVICE_ID_CMD_646 && dev->revision < 3))
- reg51 |= CNTRL_ENA_1ST;
-
- p += sprintf(p, "---------------- Primary Channel "
- "---------------- Secondary Channel ------------\n");
- p += sprintf(p, " %s %s\n",
- (reg51 & CNTRL_ENA_1ST) ? "enabled " : "disabled",
- (reg51 & CNTRL_ENA_2ND) ? "enabled " : "disabled");
- p += sprintf(p, "---------------- drive0 --------- drive1 "
- "-------- drive0 --------- drive1 ------\n");
- p += sprintf(p, "DMA enabled: %s %s"
- " %s %s\n",
- (reg72 & 0x20) ? "yes" : "no ", (reg72 & 0x40) ? "yes" : "no ",
- (reg7a & 0x20) ? "yes" : "no ", (reg7a & 0x40) ? "yes" : "no ");
- p += sprintf(p, "UltraDMA mode: %s (%c) %s (%c)",
- ( reg73 & 0x01) ? " on" : "off",
- ((reg73 & 0x30) == 0x30) ? ((reg73 & 0x04) ? '3' : '0') :
- ((reg73 & 0x30) == 0x20) ? ((reg73 & 0x04) ? '3' : '1') :
- ((reg73 & 0x30) == 0x10) ? ((reg73 & 0x04) ? '4' : '2') :
- ((reg73 & 0x30) == 0x00) ? ((reg73 & 0x04) ? '5' : '2') : '?',
- ( reg73 & 0x02) ? " on" : "off",
- ((reg73 & 0xC0) == 0xC0) ? ((reg73 & 0x08) ? '3' : '0') :
- ((reg73 & 0xC0) == 0x80) ? ((reg73 & 0x08) ? '3' : '1') :
- ((reg73 & 0xC0) == 0x40) ? ((reg73 & 0x08) ? '4' : '2') :
- ((reg73 & 0xC0) == 0x00) ? ((reg73 & 0x08) ? '5' : '2') : '?');
- p += sprintf(p, " %s (%c) %s (%c)\n",
- ( reg7b & 0x01) ? " on" : "off",
- ((reg7b & 0x30) == 0x30) ? ((reg7b & 0x04) ? '3' : '0') :
- ((reg7b & 0x30) == 0x20) ? ((reg7b & 0x04) ? '3' : '1') :
- ((reg7b & 0x30) == 0x10) ? ((reg7b & 0x04) ? '4' : '2') :
- ((reg7b & 0x30) == 0x00) ? ((reg7b & 0x04) ? '5' : '2') : '?',
- ( reg7b & 0x02) ? " on" : "off",
- ((reg7b & 0xC0) == 0xC0) ? ((reg7b & 0x08) ? '3' : '0') :
- ((reg7b & 0xC0) == 0x80) ? ((reg7b & 0x08) ? '3' : '1') :
- ((reg7b & 0xC0) == 0x40) ? ((reg7b & 0x08) ? '4' : '2') :
- ((reg7b & 0xC0) == 0x00) ? ((reg7b & 0x08) ? '5' : '2') : '?');
- p += sprintf(p, "Interrupt: %s, %s %s, %s\n",
- (reg71 & MRDMODE_BLK_CH0 ) ? "blocked" : "enabled",
- (reg50 & CFR_INTR_CH0 ) ? "pending" : "clear ",
- (reg71 & MRDMODE_BLK_CH1 ) ? "blocked" : "enabled",
- (reg57 & ARTTIM23_INTR_CH1) ? "pending" : "clear ");
-
- return (char *)p;
-}
-
-static int cmd64x_get_info (char *buffer, char **addr, off_t offset, int count)
-{
- char *p = buffer;
- int i;
-
- for (i = 0; i < n_cmd_devs; i++) {
- struct pci_dev *dev = cmd_devs[i];
- p = print_cmd64x_get_info(p, dev, i);
- }
- return p-buffer; /* => must be less than 4k! */
-}
-
-#endif /* defined(DISPLAY_CMD64X_TIMINGS) && defined(CONFIG_IDE_PROC_FS) */
-
static u8 quantize_timing(int timing, int quant)
{
return (timing + quant - 1) / quant;
@@ -173,7 +68,7 @@ static u8 quantize_timing(int timing, int quant)
*/
static void program_cycle_times (ide_drive_t *drive, int cycle_time, int active_time)
{
- struct pci_dev *dev = HWIF(drive)->pci_dev;
+ struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
int clock_time = 1000 / system_bus_clock();
u8 cycle_count, active_count, recovery_count, drwtim;
static const u8 recovery_values[] =
@@ -220,7 +115,7 @@ static void program_cycle_times (ide_drive_t *drive, int cycle_time, int active_
static void cmd64x_tune_pio(ide_drive_t *drive, const u8 pio)
{
ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
unsigned int cycle_time;
u8 setup_count, arttim = 0;
@@ -285,7 +180,7 @@ static void cmd64x_set_pio_mode(ide_drive_t *drive, const u8 pio)
static void cmd64x_set_dma_mode(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 unit = drive->dn & 0x01;
u8 regU = 0, pciU = hwif->channel ? UDIDETCR1 : UDIDETCR0;
@@ -322,8 +217,6 @@ static void cmd64x_set_dma_mode(ide_drive_t *drive, const u8 speed)
case XFER_MW_DMA_0:
program_cycle_times(drive, 480, 215);
break;
- default:
- return;
}
if (speed >= XFER_SW_DMA_0)
@@ -333,14 +226,15 @@ static void cmd64x_set_dma_mode(ide_drive_t *drive, const u8 speed)
static int cmd648_ide_dma_end (ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
+ unsigned long base = hwif->dma_base - (hwif->channel * 8);
int err = __ide_dma_end(drive);
u8 irq_mask = hwif->channel ? MRDMODE_INTR_CH1 :
MRDMODE_INTR_CH0;
- u8 mrdmode = inb(hwif->dma_master + 0x01);
+ u8 mrdmode = inb(base + 1);
/* clear the interrupt bit */
outb((mrdmode & ~(MRDMODE_INTR_CH0 | MRDMODE_INTR_CH1)) | irq_mask,
- hwif->dma_master + 0x01);
+ base + 1);
return err;
}
@@ -348,7 +242,7 @@ static int cmd648_ide_dma_end (ide_drive_t *drive)
static int cmd64x_ide_dma_end (ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
int irq_reg = hwif->channel ? ARTTIM23 : CFR;
u8 irq_mask = hwif->channel ? ARTTIM23_INTR_CH1 :
CFR_INTR_CH0;
@@ -365,10 +259,11 @@ static int cmd64x_ide_dma_end (ide_drive_t *drive)
static int cmd648_ide_dma_test_irq (ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
+ unsigned long base = hwif->dma_base - (hwif->channel * 8);
u8 irq_mask = hwif->channel ? MRDMODE_INTR_CH1 :
MRDMODE_INTR_CH0;
u8 dma_stat = inb(hwif->dma_status);
- u8 mrdmode = inb(hwif->dma_master + 0x01);
+ u8 mrdmode = inb(base + 1);
#ifdef DEBUG
printk("%s: dma_stat: 0x%02x mrdmode: 0x%02x irq_mask: 0x%02x\n",
@@ -387,7 +282,7 @@ static int cmd648_ide_dma_test_irq (ide_drive_t *drive)
static int cmd64x_ide_dma_test_irq (ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
int irq_reg = hwif->channel ? ARTTIM23 : CFR;
u8 irq_mask = hwif->channel ? ARTTIM23_INTR_CH1 :
CFR_INTR_CH0;
@@ -472,22 +367,12 @@ static unsigned int __devinit init_chipset_cmd64x(struct pci_dev *dev, const cha
mrdmode &= ~0x30;
(void) pci_write_config_byte(dev, MRDMODE, (mrdmode | 0x02));
-#if defined(DISPLAY_CMD64X_TIMINGS) && defined(CONFIG_IDE_PROC_FS)
-
- cmd_devs[n_cmd_devs++] = dev;
-
- if (!cmd64x_proc) {
- cmd64x_proc = 1;
- ide_pci_create_host_proc("cmd64x", cmd64x_get_info);
- }
-#endif /* DISPLAY_CMD64X_TIMINGS && CONFIG_IDE_PROC_FS */
-
return 0;
}
static u8 __devinit ata66_cmd64x(ide_hwif_t *hwif)
{
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 bmidecsr = 0, mask = hwif->channel ? 0x02 : 0x01;
switch (dev->device) {
@@ -502,11 +387,13 @@ static u8 __devinit ata66_cmd64x(ide_hwif_t *hwif)
static void __devinit init_hwif_cmd64x(ide_hwif_t *hwif)
{
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
hwif->set_pio_mode = &cmd64x_set_pio_mode;
hwif->set_dma_mode = &cmd64x_set_dma_mode;
+ hwif->cable_detect = ata66_cmd64x;
+
if (!hwif->dma_base)
return;
@@ -525,9 +412,6 @@ static void __devinit init_hwif_cmd64x(ide_hwif_t *hwif)
if (dev->device == PCI_DEVICE_ID_CMD_646 && dev->revision < 5)
hwif->ultra_mask = 0x00;
- if (hwif->cbl != ATA_CBL_PATA40_SHORT)
- hwif->cbl = ata66_cmd64x(hwif);
-
switch (dev->device) {
case PCI_DEVICE_ID_CMD_648:
case PCI_DEVICE_ID_CMD_649:
@@ -555,7 +439,9 @@ static const struct ide_port_info cmd64x_chipsets[] __devinitdata = {
.init_chipset = init_chipset_cmd64x,
.init_hwif = init_hwif_cmd64x,
.enablebits = {{0x00,0x00,0x00}, {0x51,0x08,0x08}},
- .host_flags = IDE_HFLAG_ABUSE_PREFETCH | IDE_HFLAG_BOOTABLE,
+ .host_flags = IDE_HFLAG_CLEAR_SIMPLEX |
+ IDE_HFLAG_ABUSE_PREFETCH |
+ IDE_HFLAG_BOOTABLE,
.pio_mask = ATA_PIO5,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = 0x00, /* no udma */
diff --git a/drivers/ide/pci/cs5520.c b/drivers/ide/pci/cs5520.c
index 0466462fd21..0be1a824102 100644
--- a/drivers/ide/pci/cs5520.c
+++ b/drivers/ide/pci/cs5520.c
@@ -35,22 +35,12 @@
#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/ioport.h>
-#include <linux/blkdev.h>
#include <linux/hdreg.h>
-
-#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/ide.h>
#include <linux/dma-mapping.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-
struct pio_clocks
{
int address;
@@ -69,9 +59,8 @@ static struct pio_clocks cs5520_pio_clocks[]={
static void cs5520_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *pdev = hwif->pci_dev;
+ struct pci_dev *pdev = to_pci_dev(hwif->dev);
int controller = drive->dn > 1 ? 1 : 0;
- u8 reg;
/* FIXME: if DMA = 1 do we need to set the DMA bit here ? */
@@ -91,11 +80,6 @@ static void cs5520_set_pio_mode(ide_drive_t *drive, const u8 pio)
pci_write_config_byte(pdev, 0x66 + 4*controller + (drive->dn&1),
(cs5520_pio_clocks[pio].recovery << 4) |
(cs5520_pio_clocks[pio].assert));
-
- /* Set the DMA enable/disable flag */
- reg = inb(hwif->dma_base + 0x02 + 8*controller);
- reg |= 1<<((drive->dn&1)+5);
- outb(reg, hwif->dma_base + 0x02 + 8*controller);
}
static void cs5520_set_dma_mode(ide_drive_t *drive, const u8 speed)
@@ -109,13 +93,14 @@ static void cs5520_set_dma_mode(ide_drive_t *drive, const u8 speed)
* We wrap the DMA activate to set the vdma flag. This is needed
* so that the IDE DMA layer issues PIO not DMA commands over the
* DMA channel
+ *
+ * ATAPI is harder so disable it for now using IDE_HFLAG_NO_ATAPI_DMA
*/
-
-static int cs5520_dma_on(ide_drive_t *drive)
+
+static void cs5520_dma_host_set(ide_drive_t *drive, int on)
{
- /* ATAPI is harder so leave it for now */
- drive->vdma = 1;
- return 0;
+ drive->vdma = on;
+ ide_dma_host_set(drive, on);
}
static void __devinit init_hwif_cs5520(ide_hwif_t *hwif)
@@ -126,7 +111,7 @@ static void __devinit init_hwif_cs5520(ide_hwif_t *hwif)
if (hwif->dma_base == 0)
return;
- hwif->ide_dma_on = &cs5520_dma_on;
+ hwif->dma_host_set = &cs5520_dma_host_set;
}
#define DECLARE_CS_DEV(name_str) \
@@ -137,6 +122,7 @@ static void __devinit init_hwif_cs5520(ide_hwif_t *hwif)
IDE_HFLAG_CS5520 | \
IDE_HFLAG_VDMA | \
IDE_HFLAG_NO_ATAPI_DMA | \
+ IDE_HFLAG_ABUSE_SET_DMA_MODE |\
IDE_HFLAG_BOOTABLE, \
.pio_mask = ATA_PIO4, \
}
@@ -160,8 +146,14 @@ static int __devinit cs5520_init_one(struct pci_dev *dev, const struct pci_devic
ide_setup_pci_noise(dev, d);
/* We must not grab the entire device, it has 'ISA' space in its
- BARS too and we will freak out other bits of the kernel */
- if (pci_enable_device_bars(dev, 1<<2)) {
+ * BARS too and we will freak out other bits of the kernel
+ *
+ * pci_enable_device_bars() is going away. I replaced it with
+ * IO only enable for now but I'll need confirmation this is
+ * allright for that device. If not, it will need some kind of
+ * quirk. --BenH.
+ */
+ if (pci_enable_device_io(dev)) {
printk(KERN_WARNING "%s: Unable to enable 55x0.\n", d->name);
return -ENODEV;
}
@@ -178,7 +170,7 @@ static int __devinit cs5520_init_one(struct pci_dev *dev, const struct pci_devic
ide_pci_setup_ports(dev, d, 14, &idx[0]);
- ide_device_add(idx);
+ ide_device_add(idx, d);
return 0;
}
diff --git a/drivers/ide/pci/cs5530.c b/drivers/ide/pci/cs5530.c
index 547690395ee..941a1344820 100644
--- a/drivers/ide/pci/cs5530.c
+++ b/drivers/ide/pci/cs5530.c
@@ -1,6 +1,4 @@
/*
- * linux/drivers/ide/pci/cs5530.c Version 0.77 Sep 24 2007
- *
* Copyright (C) 2000 Andre Hedrick <andre@linux-ide.org>
* Copyright (C) 2000 Mark Lord <mlord@pobox.com>
* Copyright (C) 2007 Bartlomiej Zolnierkiewicz
@@ -17,18 +15,12 @@
#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/ioport.h>
-#include <linux/blkdev.h>
#include <linux/hdreg.h>
-#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/ide.h>
+
#include <asm/io.h>
-#include <asm/irq.h>
/*
* Here are the standard PIO mode 0-4 timings for each "format".
@@ -116,8 +108,6 @@ static void cs5530_set_dma_mode(ide_drive_t *drive, const u8 mode)
case XFER_MW_DMA_0: timings = 0x00077771; break;
case XFER_MW_DMA_1: timings = 0x00012121; break;
case XFER_MW_DMA_2: timings = 0x00002020; break;
- default:
- return;
}
basereg = CS5530_BASEREG(drive->hwif);
reg = inl(basereg + 4); /* get drive0 config register */
diff --git a/drivers/ide/pci/cs5535.c b/drivers/ide/pci/cs5535.c
index ddcbeba671e..d7b5ea992e9 100644
--- a/drivers/ide/pci/cs5535.c
+++ b/drivers/ide/pci/cs5535.c
@@ -1,6 +1,4 @@
/*
- * linux/drivers/ide/pci/cs5535.c
- *
* Copyright (C) 2004-2005 Advanced Micro Devices, Inc.
* Copyright (C) 2007 Bartlomiej Zolnierkiewicz
*
@@ -157,8 +155,9 @@ static void cs5535_set_pio_mode(ide_drive_t *drive, const u8 pio)
cs5535_set_speed(drive, XFER_PIO_0 + pio);
}
-static u8 __devinit cs5535_cable_detect(struct pci_dev *dev)
+static u8 __devinit cs5535_cable_detect(ide_hwif_t *hwif)
{
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 bit;
/* if a 80 wire cable was detected */
@@ -180,17 +179,14 @@ static void __devinit init_hwif_cs5535(ide_hwif_t *hwif)
hwif->set_pio_mode = &cs5535_set_pio_mode;
hwif->set_dma_mode = &cs5535_set_dma_mode;
- if (hwif->dma_base == 0)
- return;
-
- hwif->cbl = cs5535_cable_detect(hwif->pci_dev);
+ hwif->cable_detect = cs5535_cable_detect;
}
static const struct ide_port_info cs5535_chipset __devinitdata = {
.name = "CS5535",
.init_hwif = init_hwif_cs5535,
.host_flags = IDE_HFLAG_SINGLE | IDE_HFLAG_POST_SET_MODE |
- IDE_HFLAG_BOOTABLE,
+ IDE_HFLAG_ABUSE_SET_DMA_MODE | IDE_HFLAG_BOOTABLE,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = ATA_UDMA4,
diff --git a/drivers/ide/pci/cy82c693.c b/drivers/ide/pci/cy82c693.c
index 1cd4e9cb052..724cbacf4e5 100644
--- a/drivers/ide/pci/cy82c693.c
+++ b/drivers/ide/pci/cy82c693.c
@@ -1,6 +1,4 @@
/*
- * linux/drivers/ide/pci/cy82c693.c Version 0.42 Oct 23, 2007
- *
* Copyright (C) 1998-2000 Andreas S. Krebs (akrebs@altavista.net), Maintainer
* Copyright (C) 1998-2002 Andre Hedrick <andre@linux-ide.org>, Integrator
*
@@ -47,7 +45,6 @@
#include <linux/module.h>
#include <linux/types.h>
#include <linux/pci.h>
-#include <linux/delay.h>
#include <linux/ide.h>
#include <linux/init.h>
@@ -176,17 +173,12 @@ static void compute_clocks (u8 pio, pio_clocks_t *p_pclk)
* set DMA mode a specific channel for CY82C693
*/
-static void cy82c693_dma_enable (ide_drive_t *drive, int mode, int single)
+static void cy82c693_set_dma_mode(ide_drive_t *drive, const u8 mode)
{
- u8 index = 0, data = 0;
+ ide_hwif_t *hwif = drive->hwif;
+ u8 single = (mode & 0x10) >> 4, index = 0, data = 0;
- if (mode>2) /* make sure we set a valid mode */
- mode = 2;
-
- if (mode > drive->id->tDMA) /* to be absolutly sure we have a valid mode */
- mode = drive->id->tDMA;
-
- index = (HWIF(drive)->channel==0) ? CY82_INDEX_CHANNEL0 : CY82_INDEX_CHANNEL1;
+ index = hwif->channel ? CY82_INDEX_CHANNEL1 : CY82_INDEX_CHANNEL0;
#if CY82C693_DEBUG_LOGS
/* for debug let's show the previous values */
@@ -199,7 +191,7 @@ static void cy82c693_dma_enable (ide_drive_t *drive, int mode, int single)
(data&0x3), ((data>>2)&1));
#endif /* CY82C693_DEBUG_LOGS */
- data = (u8)mode|(u8)(single<<2);
+ data = (mode & 3) | (single << 2);
outb(index, CY82_INDEX_PORT);
outb(data, CY82_DATA_PORT);
@@ -207,7 +199,7 @@ static void cy82c693_dma_enable (ide_drive_t *drive, int mode, int single)
#if CY82C693_DEBUG_INFO
printk(KERN_INFO "%s (ch=%d, dev=%d): set DMA mode to %d (single=%d)\n",
drive->name, HWIF(drive)->channel, drive->select.b.unit,
- mode, single);
+ mode & 3, single);
#endif /* CY82C693_DEBUG_INFO */
/*
@@ -230,43 +222,10 @@ static void cy82c693_dma_enable (ide_drive_t *drive, int mode, int single)
#endif /* CY82C693_DEBUG_INFO */
}
-/*
- * used to set DMA mode for CY82C693 (single and multi modes)
- */
-static int cy82c693_ide_dma_on (ide_drive_t *drive)
-{
- struct hd_driveid *id = drive->id;
-
-#if CY82C693_DEBUG_INFO
- printk (KERN_INFO "dma_on: %s\n", drive->name);
-#endif /* CY82C693_DEBUG_INFO */
-
- if (id != NULL) {
- /* Enable DMA on any drive that has DMA
- * (multi or single) enabled
- */
- if (id->field_valid & 2) { /* regular DMA */
- int mmode, smode;
-
- mmode = id->dma_mword & (id->dma_mword >> 8);
- smode = id->dma_1word & (id->dma_1word >> 8);
-
- if (mmode != 0) {
- /* enable multi */
- cy82c693_dma_enable(drive, (mmode >> 1), 0);
- } else if (smode != 0) {
- /* enable single */
- cy82c693_dma_enable(drive, (smode >> 1), 1);
- }
- }
- }
- return __ide_dma_on(drive);
-}
-
static void cy82c693_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
pio_clocks_t pclk;
unsigned int addrCtrl;
@@ -429,18 +388,15 @@ static unsigned int __devinit init_chipset_cy82c693(struct pci_dev *dev, const c
static void __devinit init_hwif_cy82c693(ide_hwif_t *hwif)
{
hwif->set_pio_mode = &cy82c693_set_pio_mode;
-
- if (hwif->dma_base == 0)
- return;
-
- hwif->ide_dma_on = &cy82c693_ide_dma_on;
+ hwif->set_dma_mode = &cy82c693_set_dma_mode;
}
static void __devinit init_iops_cy82c693(ide_hwif_t *hwif)
{
static ide_hwif_t *primary;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
- if (PCI_FUNC(hwif->pci_dev->devfn) == 1)
+ if (PCI_FUNC(dev->devfn) == 1)
primary = hwif;
else {
hwif->mate = primary;
@@ -454,11 +410,11 @@ static const struct ide_port_info cy82c693_chipset __devinitdata = {
.init_iops = init_iops_cy82c693,
.init_hwif = init_hwif_cy82c693,
.chipset = ide_cy82c693,
- .host_flags = IDE_HFLAG_SINGLE | IDE_HFLAG_TRUST_BIOS_FOR_DMA |
+ .host_flags = IDE_HFLAG_SINGLE | IDE_HFLAG_CY82C693 |
IDE_HFLAG_BOOTABLE,
.pio_mask = ATA_PIO4,
- .swdma_mask = ATA_SWDMA2_ONLY,
- .mwdma_mask = ATA_MWDMA2_ONLY,
+ .swdma_mask = ATA_SWDMA2,
+ .mwdma_mask = ATA_MWDMA2,
};
static int __devinit cy82c693_init_one(struct pci_dev *dev, const struct pci_device_id *id)
diff --git a/drivers/ide/pci/delkin_cb.c b/drivers/ide/pci/delkin_cb.c
index 83829081640..3f9cd64c26a 100644
--- a/drivers/ide/pci/delkin_cb.c
+++ b/drivers/ide/pci/delkin_cb.c
@@ -1,6 +1,4 @@
/*
- * linux/drivers/ide/pci/delkin_cb.c
- *
* Created 20 Oct 2004 by Mark Lord
*
* Basic support for Delkin/ASKA/Workbit Cardbus CompactFlash adapter
@@ -18,15 +16,14 @@
* License. See the file COPYING in the main directory of this archive for
* more details.
*/
-#include <linux/autoconf.h>
+
#include <linux/types.h>
#include <linux/module.h>
-#include <linux/mm.h>
-#include <linux/blkdev.h>
#include <linux/hdreg.h>
#include <linux/ide.h>
#include <linux/init.h>
#include <linux/pci.h>
+
#include <asm/io.h>
/*
@@ -54,6 +51,7 @@ delkin_cb_probe (struct pci_dev *dev, const struct pci_device_id *id)
ide_hwif_t *hwif = NULL;
ide_drive_t *drive;
int i, rc;
+ u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
rc = pci_enable_device(dev);
if (rc) {
@@ -80,20 +78,40 @@ delkin_cb_probe (struct pci_dev *dev, const struct pci_device_id *id)
hw.irq = dev->irq;
hw.chipset = ide_pci; /* this enables IRQ sharing */
- rc = ide_register_hw(&hw, &ide_undecoded_slave, 0, &hwif);
- if (rc < 0) {
- printk(KERN_ERR "delkin_cb: ide_register_hw failed (%d)\n", rc);
- pci_disable_device(dev);
- return -ENODEV;
- }
+ hwif = ide_deprecated_find_port(hw.io_ports[IDE_DATA_OFFSET]);
+ if (hwif == NULL)
+ goto out_disable;
+
+ i = hwif->index;
+
+ if (hwif->present)
+ ide_unregister(i, 0, 0);
+ else if (!hwif->hold)
+ ide_init_port_data(hwif, i);
+
+ ide_init_port_hw(hwif, &hw);
+ hwif->quirkproc = &ide_undecoded_slave;
+
+ idx[0] = i;
+
+ ide_device_add(idx, NULL);
+
+ if (!hwif->present)
+ goto out_disable;
+
pci_set_drvdata(dev, hwif);
- hwif->pci_dev = dev;
+ hwif->dev = &dev->dev;
drive = &hwif->drives[0];
if (drive->present) {
drive->io_32bit = 1;
drive->unmask = 1;
}
return 0;
+
+out_disable:
+ printk(KERN_ERR "delkin_cb: no IDE devices found\n");
+ pci_disable_device(dev);
+ return -ENODEV;
}
static void
@@ -102,7 +120,8 @@ delkin_cb_remove (struct pci_dev *dev)
ide_hwif_t *hwif = pci_get_drvdata(dev);
if (hwif)
- ide_unregister(hwif->index);
+ ide_unregister(hwif->index, 0, 0);
+
pci_disable_device(dev);
}
diff --git a/drivers/ide/pci/generic.c b/drivers/ide/pci/generic.c
index 06885697ed7..7fd83a9d4de 100644
--- a/drivers/ide/pci/generic.c
+++ b/drivers/ide/pci/generic.c
@@ -1,6 +1,4 @@
/*
- * linux/drivers/ide/pci/generic.c Version 0.11 December 30, 2002
- *
* Copyright (C) 2001-2002 Andre Hedrick <andre@linux-ide.org>
* Portions (C) Copyright 2002 Red Hat Inc <alan@redhat.com>
*
@@ -24,33 +22,13 @@
#include <linux/types.h>
#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/ioport.h>
-#include <linux/blkdev.h>
#include <linux/hdreg.h>
#include <linux/pci.h>
#include <linux/ide.h>
#include <linux/init.h>
-#include <asm/io.h>
-
static int ide_generic_all; /* Set to claim all devices */
-/*
- * the module_param_named() was added for the modular case
- * the __setup() is left as compatibility for existing setups
- */
-#ifndef MODULE
-static int __init ide_generic_all_on(char *unused)
-{
- ide_generic_all = 1;
- printk(KERN_INFO "IDE generic will claim all unknown PCI IDE storage controllers.\n");
- return 1;
-}
-const __setup("all-generic-ide", ide_generic_all_on);
-#endif
module_param_named(all_generic_ide, ide_generic_all, bool, 0444);
MODULE_PARM_DESC(all_generic_ide, "IDE generic will claim all unknown PCI IDE storage controllers.");
@@ -104,7 +82,8 @@ static const struct ide_port_info generic_chipsets[] __devinitdata = {
{ /* 14 */
.name = "Revolution",
- .host_flags = IDE_HFLAG_TRUST_BIOS_FOR_DMA |
+ .host_flags = IDE_HFLAG_CLEAR_SIMPLEX |
+ IDE_HFLAG_TRUST_BIOS_FOR_DMA |
IDE_HFLAG_OFF_BOARD,
.swdma_mask = ATA_SWDMA2,
.mwdma_mask = ATA_MWDMA2,
diff --git a/drivers/ide/pci/hpt34x.c b/drivers/ide/pci/hpt34x.c
index ae6307fae4f..9f01da46b01 100644
--- a/drivers/ide/pci/hpt34x.c
+++ b/drivers/ide/pci/hpt34x.c
@@ -1,7 +1,6 @@
/*
- * linux/drivers/ide/pci/hpt34x.c Version 0.40 Sept 10, 2002
- *
* Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org>
+ *
* May be copied or modified under the terms of the GNU General Public License
*
*
@@ -27,25 +26,18 @@
#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
#include <linux/ioport.h>
-#include <linux/blkdev.h>
#include <linux/hdreg.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/ide.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-
#define HPT343_DEBUG_DRIVE_INFO 0
static void hpt34x_set_mode(ide_drive_t *drive, const u8 speed)
{
- struct pci_dev *dev = HWIF(drive)->pci_dev;
+ struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
u32 reg1= 0, tmp1 = 0, reg2 = 0, tmp2 = 0;
u8 hi_speed, lo_speed;
@@ -129,14 +121,19 @@ static void __devinit init_hwif_hpt34x(ide_hwif_t *hwif)
hwif->set_dma_mode = &hpt34x_set_mode;
}
+#define IDE_HFLAGS_HPT34X \
+ (IDE_HFLAG_NO_ATAPI_DMA | \
+ IDE_HFLAG_NO_DSC | \
+ IDE_HFLAG_ABUSE_SET_DMA_MODE | \
+ IDE_HFLAG_NO_AUTODMA)
+
static const struct ide_port_info hpt34x_chipsets[] __devinitdata = {
{ /* 0 */
.name = "HPT343",
.init_chipset = init_chipset_hpt34x,
.init_hwif = init_hwif_hpt34x,
.extra = 16,
- .host_flags = IDE_HFLAG_NO_ATAPI_DMA |
- IDE_HFLAG_NO_AUTODMA,
+ .host_flags = IDE_HFLAGS_HPT34X,
.pio_mask = ATA_PIO5,
},
{ /* 1 */
@@ -144,9 +141,7 @@ static const struct ide_port_info hpt34x_chipsets[] __devinitdata = {
.init_chipset = init_chipset_hpt34x,
.init_hwif = init_hwif_hpt34x,
.extra = 16,
- .host_flags = IDE_HFLAG_NO_ATAPI_DMA |
- IDE_HFLAG_NO_AUTODMA |
- IDE_HFLAG_OFF_BOARD,
+ .host_flags = IDE_HFLAGS_HPT34X | IDE_HFLAG_OFF_BOARD,
.pio_mask = ATA_PIO5,
#ifdef CONFIG_HPT34X_AUTODMA
.swdma_mask = ATA_SWDMA2,
diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c
index 9fce25bdec8..d0f7bb8b8ad 100644
--- a/drivers/ide/pci/hpt366.c
+++ b/drivers/ide/pci/hpt366.c
@@ -1,6 +1,4 @@
/*
- * linux/drivers/ide/pci/hpt366.c Version 1.22 Dec 4, 2007
- *
* Copyright (C) 1999-2003 Andre Hedrick <andre@linux-ide.org>
* Portions Copyright (C) 2001 Sun Microsystems, Inc.
* Portions Copyright (C) 2003 Red Hat Inc
@@ -88,7 +86,7 @@
* - rename all the register related variables consistently
* - move all the interrupt twiddling code from the speedproc handlers into
* init_hwif_hpt366(), also grouping all the DMA related code together there
- * - merge two HPT37x speedproc handlers, fix the PIO timing register mask and
+ * - merge HPT36x/HPT37x speedproc handlers, fix PIO timing register mask and
* separate the UltraDMA and MWDMA masks there to avoid changing PIO timings
* when setting an UltraDMA mode
* - fix hpt3xx_tune_drive() to set the PIO mode requested, not always select
@@ -123,12 +121,8 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/ioport.h>
#include <linux/blkdev.h>
#include <linux/hdreg.h>
-
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/init.h>
@@ -136,7 +130,6 @@
#include <asm/uaccess.h>
#include <asm/io.h>
-#include <asm/irq.h>
/* various tuning parameters */
#define HPT_RESET_STATE_ENGINE
@@ -458,6 +451,13 @@ enum ata_clock {
NUM_ATA_CLOCKS
};
+struct hpt_timings {
+ u32 pio_mask;
+ u32 dma_mask;
+ u32 ultra_mask;
+ u32 *clock_table[NUM_ATA_CLOCKS];
+};
+
/*
* Hold all the HighPoint chip information in one place.
*/
@@ -468,7 +468,8 @@ struct hpt_info {
u8 udma_mask; /* Allowed UltraDMA modes mask. */
u8 dpll_clk; /* DPLL clock in MHz */
u8 pci_clk; /* PCI clock in MHz */
- u32 **settings; /* Chipset settings table */
+ struct hpt_timings *timings; /* Chipset timing data */
+ u8 clock; /* ATA clock selected */
};
/* Supported HighPoint chips */
@@ -486,20 +487,30 @@ enum {
HPT371N
};
-static u32 *hpt36x_settings[NUM_ATA_CLOCKS] = {
- twenty_five_base_hpt36x,
- thirty_three_base_hpt36x,
- forty_base_hpt36x,
- NULL,
- NULL
+static struct hpt_timings hpt36x_timings = {
+ .pio_mask = 0xc1f8ffff,
+ .dma_mask = 0x303800ff,
+ .ultra_mask = 0x30070000,
+ .clock_table = {
+ [ATA_CLOCK_25MHZ] = twenty_five_base_hpt36x,
+ [ATA_CLOCK_33MHZ] = thirty_three_base_hpt36x,
+ [ATA_CLOCK_40MHZ] = forty_base_hpt36x,
+ [ATA_CLOCK_50MHZ] = NULL,
+ [ATA_CLOCK_66MHZ] = NULL
+ }
};
-static u32 *hpt37x_settings[NUM_ATA_CLOCKS] = {
- NULL,
- thirty_three_base_hpt37x,
- NULL,
- fifty_base_hpt37x,
- sixty_six_base_hpt37x
+static struct hpt_timings hpt37x_timings = {
+ .pio_mask = 0xcfc3ffff,
+ .dma_mask = 0x31c001ff,
+ .ultra_mask = 0x303c0000,
+ .clock_table = {
+ [ATA_CLOCK_25MHZ] = NULL,
+ [ATA_CLOCK_33MHZ] = thirty_three_base_hpt37x,
+ [ATA_CLOCK_40MHZ] = NULL,
+ [ATA_CLOCK_50MHZ] = fifty_base_hpt37x,
+ [ATA_CLOCK_66MHZ] = sixty_six_base_hpt37x
+ }
};
static const struct hpt_info hpt36x __devinitdata = {
@@ -507,7 +518,7 @@ static const struct hpt_info hpt36x __devinitdata = {
.chip_type = HPT36x,
.udma_mask = HPT366_ALLOW_ATA66_3 ? (HPT366_ALLOW_ATA66_4 ? ATA_UDMA4 : ATA_UDMA3) : ATA_UDMA2,
.dpll_clk = 0, /* no DPLL */
- .settings = hpt36x_settings
+ .timings = &hpt36x_timings
};
static const struct hpt_info hpt370 __devinitdata = {
@@ -515,7 +526,7 @@ static const struct hpt_info hpt370 __devinitdata = {
.chip_type = HPT370,
.udma_mask = HPT370_ALLOW_ATA100_5 ? ATA_UDMA5 : ATA_UDMA4,
.dpll_clk = 48,
- .settings = hpt37x_settings
+ .timings = &hpt37x_timings
};
static const struct hpt_info hpt370a __devinitdata = {
@@ -523,7 +534,7 @@ static const struct hpt_info hpt370a __devinitdata = {
.chip_type = HPT370A,
.udma_mask = HPT370_ALLOW_ATA100_5 ? ATA_UDMA5 : ATA_UDMA4,
.dpll_clk = 48,
- .settings = hpt37x_settings
+ .timings = &hpt37x_timings
};
static const struct hpt_info hpt374 __devinitdata = {
@@ -531,7 +542,7 @@ static const struct hpt_info hpt374 __devinitdata = {
.chip_type = HPT374,
.udma_mask = ATA_UDMA5,
.dpll_clk = 48,
- .settings = hpt37x_settings
+ .timings = &hpt37x_timings
};
static const struct hpt_info hpt372 __devinitdata = {
@@ -539,7 +550,7 @@ static const struct hpt_info hpt372 __devinitdata = {
.chip_type = HPT372,
.udma_mask = HPT372_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5,
.dpll_clk = 55,
- .settings = hpt37x_settings
+ .timings = &hpt37x_timings
};
static const struct hpt_info hpt372a __devinitdata = {
@@ -547,7 +558,7 @@ static const struct hpt_info hpt372a __devinitdata = {
.chip_type = HPT372A,
.udma_mask = HPT372_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5,
.dpll_clk = 66,
- .settings = hpt37x_settings
+ .timings = &hpt37x_timings
};
static const struct hpt_info hpt302 __devinitdata = {
@@ -555,7 +566,7 @@ static const struct hpt_info hpt302 __devinitdata = {
.chip_type = HPT302,
.udma_mask = HPT302_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5,
.dpll_clk = 66,
- .settings = hpt37x_settings
+ .timings = &hpt37x_timings
};
static const struct hpt_info hpt371 __devinitdata = {
@@ -563,7 +574,7 @@ static const struct hpt_info hpt371 __devinitdata = {
.chip_type = HPT371,
.udma_mask = HPT371_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5,
.dpll_clk = 66,
- .settings = hpt37x_settings
+ .timings = &hpt37x_timings
};
static const struct hpt_info hpt372n __devinitdata = {
@@ -571,7 +582,7 @@ static const struct hpt_info hpt372n __devinitdata = {
.chip_type = HPT372N,
.udma_mask = HPT372_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5,
.dpll_clk = 77,
- .settings = hpt37x_settings
+ .timings = &hpt37x_timings
};
static const struct hpt_info hpt302n __devinitdata = {
@@ -579,7 +590,7 @@ static const struct hpt_info hpt302n __devinitdata = {
.chip_type = HPT302N,
.udma_mask = HPT302_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5,
.dpll_clk = 77,
- .settings = hpt37x_settings
+ .timings = &hpt37x_timings
};
static const struct hpt_info hpt371n __devinitdata = {
@@ -587,7 +598,7 @@ static const struct hpt_info hpt371n __devinitdata = {
.chip_type = HPT371N,
.udma_mask = HPT371_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5,
.dpll_clk = 77,
- .settings = hpt37x_settings
+ .timings = &hpt37x_timings
};
static int check_in_drive_list(ide_drive_t *drive, const char **list)
@@ -608,7 +619,8 @@ static int check_in_drive_list(ide_drive_t *drive, const char **list)
static u8 hpt3xx_udma_filter(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
- struct hpt_info *info = pci_get_drvdata(hwif->pci_dev);
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+ struct hpt_info *info = pci_get_drvdata(dev);
u8 mask = hwif->ultra_mask;
switch (info->chip_type) {
@@ -647,7 +659,8 @@ static u8 hpt3xx_udma_filter(ide_drive_t *drive)
static u8 hpt3xx_mdma_filter(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
- struct hpt_info *info = pci_get_drvdata(hwif->pci_dev);
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+ struct hpt_info *info = pci_get_drvdata(dev);
switch (info->chip_type) {
case HPT372 :
@@ -675,100 +688,56 @@ static u32 get_speed_setting(u8 speed, struct hpt_info *info)
for (i = 0; i < ARRAY_SIZE(xfer_speeds) - 1; i++)
if (xfer_speeds[i] == speed)
break;
- /*
- * NOTE: info->settings only points to the pointer
- * to the list of the actual register values
- */
- return (*info->settings)[i];
+
+ return info->timings->clock_table[info->clock][i];
}
-static void hpt36x_set_mode(ide_drive_t *drive, const u8 speed)
+static void hpt3xx_set_mode(ide_drive_t *drive, const u8 speed)
{
- ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
struct hpt_info *info = pci_get_drvdata(dev);
- u8 itr_addr = drive->dn ? 0x44 : 0x40;
+ struct hpt_timings *t = info->timings;
+ u8 itr_addr = 0x40 + (drive->dn * 4);
u32 old_itr = 0;
- u32 itr_mask, new_itr;
-
- itr_mask = speed < XFER_MW_DMA_0 ? 0x30070000 :
- (speed < XFER_UDMA_0 ? 0xc0070000 : 0xc03800ff);
-
- new_itr = get_speed_setting(speed, info);
+ u32 new_itr = get_speed_setting(speed, info);
+ u32 itr_mask = speed < XFER_MW_DMA_0 ? t->pio_mask :
+ (speed < XFER_UDMA_0 ? t->dma_mask :
+ t->ultra_mask);
+ pci_read_config_dword(dev, itr_addr, &old_itr);
+ new_itr = (old_itr & ~itr_mask) | (new_itr & itr_mask);
/*
* Disable on-chip PIO FIFO/buffer (and PIO MST mode as well)
* to avoid problems handling I/O errors later
*/
- pci_read_config_dword(dev, itr_addr, &old_itr);
- new_itr = (new_itr & ~itr_mask) | (old_itr & itr_mask);
new_itr &= ~0xc0000000;
pci_write_config_dword(dev, itr_addr, new_itr);
}
-static void hpt37x_set_mode(ide_drive_t *drive, const u8 speed)
-{
- ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = hwif->pci_dev;
- struct hpt_info *info = pci_get_drvdata(dev);
- u8 itr_addr = 0x40 + (drive->dn * 4);
- u32 old_itr = 0;
- u32 itr_mask, new_itr;
-
- itr_mask = speed < XFER_MW_DMA_0 ? 0x303c0000 :
- (speed < XFER_UDMA_0 ? 0xc03c0000 : 0xc1c001ff);
-
- new_itr = get_speed_setting(speed, info);
-
- pci_read_config_dword(dev, itr_addr, &old_itr);
- new_itr = (new_itr & ~itr_mask) | (old_itr & itr_mask);
-
- if (speed < XFER_MW_DMA_0)
- new_itr &= ~0x80000000; /* Disable on-chip PIO FIFO/buffer */
- pci_write_config_dword(dev, itr_addr, new_itr);
-}
-
-static void hpt3xx_set_mode(ide_drive_t *drive, const u8 speed)
-{
- ide_hwif_t *hwif = HWIF(drive);
- struct hpt_info *info = pci_get_drvdata(hwif->pci_dev);
-
- if (info->chip_type >= HPT370)
- hpt37x_set_mode(drive, speed);
- else /* hpt368: hpt_minimum_revision(dev, 2) */
- hpt36x_set_mode(drive, speed);
-}
-
static void hpt3xx_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
hpt3xx_set_mode(drive, XFER_PIO_0 + pio);
}
-static int hpt3xx_quirkproc(ide_drive_t *drive)
+static void hpt3xx_quirkproc(ide_drive_t *drive)
{
struct hd_driveid *id = drive->id;
const char **list = quirk_drives;
while (*list)
- if (strstr(id->model, *list++))
- return 1;
- return 0;
-}
-
-static void hpt3xx_intrproc(ide_drive_t *drive)
-{
- if (drive->quirk_list)
- return;
+ if (strstr(id->model, *list++)) {
+ drive->quirk_list = 1;
+ return;
+ }
- /* drives in the quirk_list may not like intr setups/cleanups */
- outb(drive->ctl | 2, IDE_CONTROL_REG);
+ drive->quirk_list = 0;
}
static void hpt3xx_maskproc(ide_drive_t *drive, int mask)
{
ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
struct hpt_info *info = pci_get_drvdata(dev);
if (drive->quirk_list) {
@@ -800,7 +769,7 @@ static void hpt3xx_maskproc(ide_drive_t *drive, int mask)
*/
static void hpt366_dma_lost_irq(ide_drive_t *drive)
{
- struct pci_dev *dev = HWIF(drive)->pci_dev;
+ struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
u8 mcr1 = 0, mcr3 = 0, scr1 = 0;
pci_read_config_byte(dev, 0x50, &mcr1);
@@ -816,18 +785,20 @@ static void hpt366_dma_lost_irq(ide_drive_t *drive)
static void hpt370_clear_engine(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
- pci_write_config_byte(hwif->pci_dev, hwif->select_data, 0x37);
+ pci_write_config_byte(dev, hwif->select_data, 0x37);
udelay(10);
}
static void hpt370_irq_timeout(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
u16 bfifo = 0;
u8 dma_cmd;
- pci_read_config_word(hwif->pci_dev, hwif->select_data + 2, &bfifo);
+ pci_read_config_word(dev, hwif->select_data + 2, &bfifo);
printk(KERN_DEBUG "%s: %d bytes in FIFO\n", drive->name, bfifo & 0x1ff);
/* get DMA command mode */
@@ -870,10 +841,11 @@ static void hpt370_dma_timeout(ide_drive_t *drive)
static int hpt374_ide_dma_test_irq(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
u16 bfifo = 0;
u8 dma_stat;
- pci_read_config_word(hwif->pci_dev, hwif->select_data + 2, &bfifo);
+ pci_read_config_word(dev, hwif->select_data + 2, &bfifo);
if (bfifo & 0x1FF) {
// printk("%s: %d bytes in FIFO\n", drive->name, bfifo);
return 0;
@@ -893,7 +865,7 @@ static int hpt374_ide_dma_test_irq(ide_drive_t *drive)
static int hpt374_ide_dma_end(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 mcr = 0, mcr_addr = hwif->select_data;
u8 bwsr = 0, mask = hwif->channel ? 0x02 : 0x01;
@@ -914,32 +886,33 @@ static int hpt374_ide_dma_end(ide_drive_t *drive)
static void hpt3xxn_set_clock(ide_hwif_t *hwif, u8 mode)
{
- u8 scr2 = inb(hwif->dma_master + 0x7b);
+ unsigned long base = hwif->extra_base;
+ u8 scr2 = inb(base + 0x6b);
if ((scr2 & 0x7f) == mode)
return;
/* Tristate the bus */
- outb(0x80, hwif->dma_master + 0x73);
- outb(0x80, hwif->dma_master + 0x77);
+ outb(0x80, base + 0x63);
+ outb(0x80, base + 0x67);
/* Switch clock and reset channels */
- outb(mode, hwif->dma_master + 0x7b);
- outb(0xc0, hwif->dma_master + 0x79);
+ outb(mode, base + 0x6b);
+ outb(0xc0, base + 0x69);
/*
* Reset the state machines.
* NOTE: avoid accidentally enabling the disabled channels.
*/
- outb(inb(hwif->dma_master + 0x70) | 0x32, hwif->dma_master + 0x70);
- outb(inb(hwif->dma_master + 0x74) | 0x32, hwif->dma_master + 0x74);
+ outb(inb(base + 0x60) | 0x32, base + 0x60);
+ outb(inb(base + 0x64) | 0x32, base + 0x64);
/* Complete reset */
- outb(0x00, hwif->dma_master + 0x79);
+ outb(0x00, base + 0x69);
/* Reconnect channels to bus */
- outb(0x00, hwif->dma_master + 0x73);
- outb(0x00, hwif->dma_master + 0x77);
+ outb(0x00, base + 0x63);
+ outb(0x00, base + 0x67);
}
/**
@@ -967,7 +940,7 @@ static void hpt3xxn_rw_disk(ide_drive_t *drive, struct request *rq)
static int hpt3xx_busproc(ide_drive_t *drive, int state)
{
ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 mcr_addr = hwif->select_data + 2;
u8 resetmask = hwif->channel ? 0x80 : 0x40;
u8 bsr2 = 0;
@@ -1210,7 +1183,7 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const cha
* We also don't like using the DPLL because this causes glitches
* on PRST-/SRST- when the state engine gets reset...
*/
- if (chip_type >= HPT374 || info->settings[clock] == NULL) {
+ if (chip_type >= HPT374 || info->timings->clock_table[clock] == NULL) {
u16 f_low, delta = pci_clk < 50 ? 2 : 4;
int adjust;
@@ -1226,7 +1199,7 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const cha
clock = ATA_CLOCK_50MHZ;
}
- if (info->settings[clock] == NULL) {
+ if (info->timings->clock_table[clock] == NULL) {
printk(KERN_ERR "%s: unknown bus timing!\n", name);
kfree(info);
return -EIO;
@@ -1267,15 +1240,10 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const cha
printk("%s: using %d MHz PCI clock\n", name, pci_clk);
}
- /*
- * Advance the table pointer to a slot which points to the list
- * of the register values settings matching the clock being used.
- */
- info->settings += clock;
-
/* Store the clock frequencies. */
info->dpll_clk = dpll_clk;
info->pci_clk = pci_clk;
+ info->clock = clock;
/* Point to this chip's own instance of the hpt_info structure. */
pci_set_drvdata(dev, info);
@@ -1306,12 +1274,55 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const cha
return dev->irq;
}
+static u8 __devinit hpt3xx_cable_detect(ide_hwif_t *hwif)
+{
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+ struct hpt_info *info = pci_get_drvdata(dev);
+ u8 chip_type = info->chip_type;
+ u8 scr1 = 0, ata66 = hwif->channel ? 0x01 : 0x02;
+
+ /*
+ * The HPT37x uses the CBLID pins as outputs for MA15/MA16
+ * address lines to access an external EEPROM. To read valid
+ * cable detect state the pins must be enabled as inputs.
+ */
+ if (chip_type == HPT374 && (PCI_FUNC(dev->devfn) & 1)) {
+ /*
+ * HPT374 PCI function 1
+ * - set bit 15 of reg 0x52 to enable TCBLID as input
+ * - set bit 15 of reg 0x56 to enable FCBLID as input
+ */
+ u8 mcr_addr = hwif->select_data + 2;
+ u16 mcr;
+
+ pci_read_config_word(dev, mcr_addr, &mcr);
+ pci_write_config_word(dev, mcr_addr, (mcr | 0x8000));
+ /* now read cable id register */
+ pci_read_config_byte(dev, 0x5a, &scr1);
+ pci_write_config_word(dev, mcr_addr, mcr);
+ } else if (chip_type >= HPT370) {
+ /*
+ * HPT370/372 and 374 pcifn 0
+ * - clear bit 0 of reg 0x5b to enable P/SCBLID as inputs
+ */
+ u8 scr2 = 0;
+
+ pci_read_config_byte(dev, 0x5b, &scr2);
+ pci_write_config_byte(dev, 0x5b, (scr2 & ~1));
+ /* now read cable id register */
+ pci_read_config_byte(dev, 0x5a, &scr1);
+ pci_write_config_byte(dev, 0x5b, scr2);
+ } else
+ pci_read_config_byte(dev, 0x5a, &scr1);
+
+ return (scr1 & ata66) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
+}
+
static void __devinit init_hwif_hpt366(ide_hwif_t *hwif)
{
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
struct hpt_info *info = pci_get_drvdata(dev);
int serialize = HPT_SERIALIZE_IO;
- u8 scr1 = 0, ata66 = hwif->channel ? 0x01 : 0x02;
u8 chip_type = info->chip_type;
u8 new_mcr, old_mcr = 0;
@@ -1320,14 +1331,16 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif)
hwif->set_pio_mode = &hpt3xx_set_pio_mode;
hwif->set_dma_mode = &hpt3xx_set_mode;
+
hwif->quirkproc = &hpt3xx_quirkproc;
- hwif->intrproc = &hpt3xx_intrproc;
hwif->maskproc = &hpt3xx_maskproc;
hwif->busproc = &hpt3xx_busproc;
hwif->udma_filter = &hpt3xx_udma_filter;
hwif->mdma_filter = &hpt3xx_mdma_filter;
+ hwif->cable_detect = hpt3xx_cable_detect;
+
/*
* HPT3xxN chips have some complications:
*
@@ -1373,43 +1386,6 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif)
if (hwif->dma_base == 0)
return;
- /*
- * The HPT37x uses the CBLID pins as outputs for MA15/MA16
- * address lines to access an external EEPROM. To read valid
- * cable detect state the pins must be enabled as inputs.
- */
- if (chip_type == HPT374 && (PCI_FUNC(dev->devfn) & 1)) {
- /*
- * HPT374 PCI function 1
- * - set bit 15 of reg 0x52 to enable TCBLID as input
- * - set bit 15 of reg 0x56 to enable FCBLID as input
- */
- u8 mcr_addr = hwif->select_data + 2;
- u16 mcr;
-
- pci_read_config_word (dev, mcr_addr, &mcr);
- pci_write_config_word(dev, mcr_addr, (mcr | 0x8000));
- /* now read cable id register */
- pci_read_config_byte (dev, 0x5a, &scr1);
- pci_write_config_word(dev, mcr_addr, mcr);
- } else if (chip_type >= HPT370) {
- /*
- * HPT370/372 and 374 pcifn 0
- * - clear bit 0 of reg 0x5b to enable P/SCBLID as inputs
- */
- u8 scr2 = 0;
-
- pci_read_config_byte (dev, 0x5b, &scr2);
- pci_write_config_byte(dev, 0x5b, (scr2 & ~1));
- /* now read cable id register */
- pci_read_config_byte (dev, 0x5a, &scr1);
- pci_write_config_byte(dev, 0x5b, scr2);
- } else
- pci_read_config_byte (dev, 0x5a, &scr1);
-
- if (hwif->cbl != ATA_CBL_PATA40_SHORT)
- hwif->cbl = (scr1 & ata66) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
-
if (chip_type >= HPT374) {
hwif->ide_dma_test_irq = &hpt374_ide_dma_test_irq;
hwif->ide_dma_end = &hpt374_ide_dma_end;
@@ -1423,7 +1399,7 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif)
static void __devinit init_dma_hpt366(ide_hwif_t *hwif, unsigned long dmabase)
{
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 masterdma = 0, slavedma = 0;
u8 dma_new = 0, dma_old = 0;
unsigned long flags;
@@ -1443,7 +1419,7 @@ static void __devinit init_dma_hpt366(ide_hwif_t *hwif, unsigned long dmabase)
local_irq_restore(flags);
- ide_setup_dma(hwif, dmabase, 8);
+ ide_setup_dma(hwif, dmabase);
}
static void __devinit hpt374_init(struct pci_dev *dev, struct pci_dev *dev2)
@@ -1494,6 +1470,11 @@ static int __devinit hpt36x_init(struct pci_dev *dev, struct pci_dev *dev2)
return 0;
}
+#define IDE_HFLAGS_HPT3XX \
+ (IDE_HFLAG_NO_ATAPI_DMA | \
+ IDE_HFLAG_ABUSE_SET_DMA_MODE | \
+ IDE_HFLAG_OFF_BOARD)
+
static const struct ide_port_info hpt366_chipsets[] __devinitdata = {
{ /* 0 */
.name = "HPT36x",
@@ -1508,9 +1489,7 @@ static const struct ide_port_info hpt366_chipsets[] __devinitdata = {
*/
.enablebits = {{0x50,0x10,0x10}, {0x54,0x04,0x04}},
.extra = 240,
- .host_flags = IDE_HFLAG_SINGLE |
- IDE_HFLAG_NO_ATAPI_DMA |
- IDE_HFLAG_OFF_BOARD,
+ .host_flags = IDE_HFLAGS_HPT3XX | IDE_HFLAG_SINGLE,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
},{ /* 1 */
@@ -1520,7 +1499,7 @@ static const struct ide_port_info hpt366_chipsets[] __devinitdata = {
.init_dma = init_dma_hpt366,
.enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}},
.extra = 240,
- .host_flags = IDE_HFLAG_NO_ATAPI_DMA | IDE_HFLAG_OFF_BOARD,
+ .host_flags = IDE_HFLAGS_HPT3XX,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
},{ /* 2 */
@@ -1530,7 +1509,7 @@ static const struct ide_port_info hpt366_chipsets[] __devinitdata = {
.init_dma = init_dma_hpt366,
.enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}},
.extra = 240,
- .host_flags = IDE_HFLAG_NO_ATAPI_DMA | IDE_HFLAG_OFF_BOARD,
+ .host_flags = IDE_HFLAGS_HPT3XX,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
},{ /* 3 */
@@ -1540,7 +1519,7 @@ static const struct ide_port_info hpt366_chipsets[] __devinitdata = {
.init_dma = init_dma_hpt366,
.enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}},
.extra = 240,
- .host_flags = IDE_HFLAG_NO_ATAPI_DMA | IDE_HFLAG_OFF_BOARD,
+ .host_flags = IDE_HFLAGS_HPT3XX,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
},{ /* 4 */
@@ -1551,7 +1530,7 @@ static const struct ide_port_info hpt366_chipsets[] __devinitdata = {
.enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}},
.udma_mask = ATA_UDMA5,
.extra = 240,
- .host_flags = IDE_HFLAG_NO_ATAPI_DMA | IDE_HFLAG_OFF_BOARD,
+ .host_flags = IDE_HFLAGS_HPT3XX,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
},{ /* 5 */
@@ -1561,7 +1540,7 @@ static const struct ide_port_info hpt366_chipsets[] __devinitdata = {
.init_dma = init_dma_hpt366,
.enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}},
.extra = 240,
- .host_flags = IDE_HFLAG_NO_ATAPI_DMA | IDE_HFLAG_OFF_BOARD,
+ .host_flags = IDE_HFLAGS_HPT3XX,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
}
diff --git a/drivers/ide/pci/it8213.c b/drivers/ide/pci/it8213.c
index 90b52ed37bf..e3427eaab43 100644
--- a/drivers/ide/pci/it8213.c
+++ b/drivers/ide/pci/it8213.c
@@ -10,13 +10,10 @@
#include <linux/types.h>
#include <linux/module.h>
#include <linux/pci.h>
-#include <linux/delay.h>
#include <linux/hdreg.h>
#include <linux/ide.h>
#include <linux/init.h>
-#include <asm/io.h>
-
/**
* it8213_set_pio_mode - set host controller for PIO mode
* @drive: drive
@@ -28,7 +25,7 @@
static void it8213_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
int is_slave = drive->dn & 1;
int master_port = 0x40;
int slave_port = 0x44;
@@ -85,7 +82,7 @@ static void it8213_set_pio_mode(ide_drive_t *drive, const u8 pio)
static void it8213_set_dma_mode(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 maslave = 0x40;
int a_speed = 3 << (drive->dn * 4);
int u_flag = 1 << drive->dn;
@@ -101,24 +98,11 @@ static void it8213_set_dma_mode(ide_drive_t *drive, const u8 speed)
pci_read_config_byte(dev, 0x54, &reg54);
pci_read_config_byte(dev, 0x55, &reg55);
- switch(speed) {
- case XFER_UDMA_6:
- case XFER_UDMA_4:
- case XFER_UDMA_2: u_speed = 2 << (drive->dn * 4); break;
- case XFER_UDMA_5:
- case XFER_UDMA_3:
- case XFER_UDMA_1: u_speed = 1 << (drive->dn * 4); break;
- case XFER_UDMA_0: u_speed = 0 << (drive->dn * 4); break;
- break;
- case XFER_MW_DMA_2:
- case XFER_MW_DMA_1:
- case XFER_SW_DMA_2:
- break;
- default:
- return;
- }
-
if (speed >= XFER_UDMA_0) {
+ u8 udma = speed - XFER_UDMA_0;
+
+ u_speed = min_t(u8, 2 - (udma & 1), udma) << (drive->dn * 4);
+
if (!(reg48 & u_flag))
pci_write_config_byte(dev, 0x48, reg48 | u_flag);
if (speed >= XFER_UDMA_5) {
@@ -156,6 +140,16 @@ static void it8213_set_dma_mode(ide_drive_t *drive, const u8 speed)
}
}
+static u8 __devinit it8213_cable_detect(ide_hwif_t *hwif)
+{
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+ u8 reg42h = 0;
+
+ pci_read_config_byte(dev, 0x42, &reg42h);
+
+ return (reg42h & 0x02) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
+}
+
/**
* init_hwif_it8213 - set up hwif structs
* @hwif: interface to set up
@@ -165,18 +159,10 @@ static void it8213_set_dma_mode(ide_drive_t *drive, const u8 speed)
static void __devinit init_hwif_it8213(ide_hwif_t *hwif)
{
- u8 reg42h = 0;
-
hwif->set_dma_mode = &it8213_set_dma_mode;
hwif->set_pio_mode = &it8213_set_pio_mode;
- if (!hwif->dma_base)
- return;
-
- pci_read_config_byte(hwif->pci_dev, 0x42, &reg42h);
-
- if (hwif->cbl != ATA_CBL_PATA40_SHORT)
- hwif->cbl = (reg42h & 0x02) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
+ hwif->cable_detect = it8213_cable_detect;
}
diff --git a/drivers/ide/pci/it821x.c b/drivers/ide/pci/it821x.c
index 99b7d763b6c..1597f0cc1bf 100644
--- a/drivers/ide/pci/it821x.c
+++ b/drivers/ide/pci/it821x.c
@@ -1,7 +1,4 @@
-
/*
- * linux/drivers/ide/pci/it821x.c Version 0.16 Jul 3 2007
- *
* Copyright (C) 2004 Red Hat <alan@redhat.com>
* Copyright (C) 2007 Bartlomiej Zolnierkiewicz
*
@@ -66,13 +63,10 @@
#include <linux/types.h>
#include <linux/module.h>
#include <linux/pci.h>
-#include <linux/delay.h>
#include <linux/hdreg.h>
#include <linux/ide.h>
#include <linux/init.h>
-#include <asm/io.h>
-
struct it821x_dev
{
unsigned int smart:1, /* Are we in smart raid mode */
@@ -113,7 +107,8 @@ static int it8212_noraid;
static void it821x_program(ide_drive_t *drive, u16 timing)
{
- ide_hwif_t *hwif = drive->hwif;
+ ide_hwif_t *hwif = drive->hwif;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
struct it821x_dev *itdev = ide_get_hwifdata(hwif);
int channel = hwif->channel;
u8 conf;
@@ -123,7 +118,8 @@ static void it821x_program(ide_drive_t *drive, u16 timing)
conf = timing >> 8;
else
conf = timing & 0xFF;
- pci_write_config_byte(hwif->pci_dev, 0x54 + 4 * channel, conf);
+
+ pci_write_config_byte(dev, 0x54 + 4 * channel, conf);
}
/**
@@ -137,7 +133,8 @@ static void it821x_program(ide_drive_t *drive, u16 timing)
static void it821x_program_udma(ide_drive_t *drive, u16 timing)
{
- ide_hwif_t *hwif = drive->hwif;
+ ide_hwif_t *hwif = drive->hwif;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
struct it821x_dev *itdev = ide_get_hwifdata(hwif);
int channel = hwif->channel;
int unit = drive->select.b.unit;
@@ -148,11 +145,12 @@ static void it821x_program_udma(ide_drive_t *drive, u16 timing)
conf = timing >> 8;
else
conf = timing & 0xFF;
- if(itdev->timing10 == 0)
- pci_write_config_byte(hwif->pci_dev, 0x56 + 4 * channel + unit, conf);
+
+ if (itdev->timing10 == 0)
+ pci_write_config_byte(dev, 0x56 + 4 * channel + unit, conf);
else {
- pci_write_config_byte(hwif->pci_dev, 0x56 + 4 * channel, conf);
- pci_write_config_byte(hwif->pci_dev, 0x56 + 4 * channel + 1, conf);
+ pci_write_config_byte(dev, 0x56 + 4 * channel, conf);
+ pci_write_config_byte(dev, 0x56 + 4 * channel + 1, conf);
}
}
@@ -167,6 +165,7 @@ static void it821x_program_udma(ide_drive_t *drive, u16 timing)
static void it821x_clock_strategy(ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
struct it821x_dev *itdev = ide_get_hwifdata(hwif);
u8 unit = drive->select.b.unit;
@@ -205,10 +204,11 @@ static void it821x_clock_strategy(ide_drive_t *drive)
itdev->clock_mode = ATA_50;
sel = 1;
}
- pci_read_config_byte(hwif->pci_dev, 0x50, &v);
+
+ pci_read_config_byte(dev, 0x50, &v);
v &= ~(1 << (1 + hwif->channel));
v |= sel << (1 + hwif->channel);
- pci_write_config_byte(hwif->pci_dev, 0x50, v);
+ pci_write_config_byte(dev, 0x50, v);
/*
* Reprogram the UDMA/PIO of the pair drive for the switch
@@ -282,7 +282,8 @@ static void it821x_set_pio_mode(ide_drive_t *drive, const u8 pio)
static void it821x_tune_mwdma (ide_drive_t *drive, byte mode_wanted)
{
- ide_hwif_t *hwif = drive->hwif;
+ ide_hwif_t *hwif = drive->hwif;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
struct it821x_dev *itdev = (void *)ide_get_hwifdata(hwif);
int unit = drive->select.b.unit;
int channel = hwif->channel;
@@ -297,12 +298,12 @@ static void it821x_tune_mwdma (ide_drive_t *drive, byte mode_wanted)
itdev->udma[unit] = UDMA_OFF;
/* UDMA bits off - Revision 0x10 do them in pairs */
- pci_read_config_byte(hwif->pci_dev, 0x50, &conf);
- if(itdev->timing10)
+ pci_read_config_byte(dev, 0x50, &conf);
+ if (itdev->timing10)
conf |= channel ? 0x60: 0x18;
else
conf |= 1 << (3 + 2 * channel + unit);
- pci_write_config_byte(hwif->pci_dev, 0x50, conf);
+ pci_write_config_byte(dev, 0x50, conf);
it821x_clock_strategy(drive);
/* FIXME: do we need to program this ? */
@@ -320,7 +321,8 @@ static void it821x_tune_mwdma (ide_drive_t *drive, byte mode_wanted)
static void it821x_tune_udma (ide_drive_t *drive, byte mode_wanted)
{
- ide_hwif_t *hwif = drive->hwif;
+ ide_hwif_t *hwif = drive->hwif;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
struct it821x_dev *itdev = ide_get_hwifdata(hwif);
int unit = drive->select.b.unit;
int channel = hwif->channel;
@@ -337,12 +339,12 @@ static void it821x_tune_udma (ide_drive_t *drive, byte mode_wanted)
itdev->udma[unit] |= 0x8080; /* UDMA 5/6 select on */
/* UDMA on. Again revision 0x10 must do the pair */
- pci_read_config_byte(hwif->pci_dev, 0x50, &conf);
- if(itdev->timing10)
+ pci_read_config_byte(dev, 0x50, &conf);
+ if (itdev->timing10)
conf &= channel ? 0x9F: 0xE7;
else
conf &= ~ (1 << (3 + 2 * channel + unit));
- pci_write_config_byte(hwif->pci_dev, 0x50, conf);
+ pci_write_config_byte(dev, 0x50, conf);
it821x_clock_strategy(drive);
it821x_program_udma(drive, itdev->udma[unit]);
@@ -431,33 +433,29 @@ static u8 __devinit ata66_it821x(ide_hwif_t *hwif)
}
/**
- * it821x_fixup - post init callback
- * @hwif: interface
+ * it821x_quirkproc - post init callback
+ * @drive: drive
*
- * This callback is run after the drives have been probed but
+ * This callback is run after the drive has been probed but
* before anything gets attached. It allows drivers to do any
* final tuning that is needed, or fixups to work around bugs.
*/
-static void __devinit it821x_fixups(ide_hwif_t *hwif)
+static void __devinit it821x_quirkproc(ide_drive_t *drive)
{
- struct it821x_dev *itdev = ide_get_hwifdata(hwif);
- int i;
+ struct it821x_dev *itdev = ide_get_hwifdata(drive->hwif);
+ struct hd_driveid *id = drive->id;
+ u16 *idbits = (u16 *)drive->id;
- if(!itdev->smart) {
+ if (!itdev->smart) {
/*
* If we are in pass through mode then not much
* needs to be done, but we do bother to clear the
* IRQ mask as we may well be in PIO (eg rev 0x10)
* for now and we know unmasking is safe on this chipset.
*/
- for (i = 0; i < 2; i++) {
- ide_drive_t *drive = &hwif->drives[i];
- if(drive->present)
- drive->unmask = 1;
- }
- return;
- }
+ drive->unmask = 1;
+ } else {
/*
* Perform fixups on smart mode. We need to "lose" some
* capabilities the firmware lacks but does not filter, and
@@ -465,16 +463,6 @@ static void __devinit it821x_fixups(ide_hwif_t *hwif)
* in RAID mode.
*/
- for(i = 0; i < 2; i++) {
- ide_drive_t *drive = &hwif->drives[i];
- struct hd_driveid *id;
- u16 *idbits;
-
- if(!drive->present)
- continue;
- id = drive->id;
- idbits = (u16 *)drive->id;
-
/* Check for RAID v native */
if(strstr(id->model, "Integrated Technology Express")) {
/* In raid mode the ident block is slightly buggy
@@ -534,9 +522,12 @@ static void __devinit it821x_fixups(ide_hwif_t *hwif)
static void __devinit init_hwif_it821x(ide_hwif_t *hwif)
{
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
struct it821x_dev *idev = kzalloc(sizeof(struct it821x_dev), GFP_KERNEL);
u8 conf;
+ hwif->quirkproc = &it821x_quirkproc;
+
if (idev == NULL) {
printk(KERN_ERR "it821x: out of memory, falling back to legacy behaviour.\n");
return;
@@ -544,7 +535,7 @@ static void __devinit init_hwif_it821x(ide_hwif_t *hwif)
ide_set_hwifdata(hwif, idev);
- pci_read_config_byte(hwif->pci_dev, 0x50, &conf);
+ pci_read_config_byte(dev, 0x50, &conf);
if (conf & 1) {
idev->smart = 1;
hwif->host_flags |= IDE_HFLAG_NO_ATAPI_DMA;
@@ -567,7 +558,7 @@ static void __devinit init_hwif_it821x(ide_hwif_t *hwif)
* this is necessary.
*/
- pci_read_config_byte(hwif->pci_dev, 0x08, &conf);
+ pci_read_config_byte(dev, 0x08, &conf);
if (conf == 0x10) {
idev->timing10 = 1;
hwif->host_flags |= IDE_HFLAG_NO_ATAPI_DMA;
@@ -585,14 +576,13 @@ static void __devinit init_hwif_it821x(ide_hwif_t *hwif)
} else
hwif->host_flags |= IDE_HFLAG_NO_SET_MODE;
+ hwif->cable_detect = ata66_it821x;
+
if (hwif->dma_base == 0)
return;
hwif->ultra_mask = ATA_UDMA6;
hwif->mwdma_mask = ATA_MWDMA2;
-
- if (hwif->cbl != ATA_CBL_PATA40_SHORT)
- hwif->cbl = ata66_it821x(hwif);
}
static void __devinit it8212_disable_raid(struct pci_dev *dev)
@@ -633,7 +623,6 @@ static unsigned int __devinit init_chipset_it821x(struct pci_dev *dev, const cha
.name = name_str, \
.init_chipset = init_chipset_it821x, \
.init_hwif = init_hwif_it821x, \
- .fixup = it821x_fixups, \
.host_flags = IDE_HFLAG_BOOTABLE, \
.pio_mask = ATA_PIO4, \
}
diff --git a/drivers/ide/pci/jmicron.c b/drivers/ide/pci/jmicron.c
index 0083eaf89c7..a56bcb4f22f 100644
--- a/drivers/ide/pci/jmicron.c
+++ b/drivers/ide/pci/jmicron.c
@@ -8,13 +8,10 @@
#include <linux/types.h>
#include <linux/module.h>
#include <linux/pci.h>
-#include <linux/delay.h>
#include <linux/hdreg.h>
#include <linux/ide.h>
#include <linux/init.h>
-#include <asm/io.h>
-
typedef enum {
PORT_PATA0 = 0,
PORT_PATA1 = 1,
@@ -30,7 +27,7 @@ typedef enum {
static u8 __devinit ata66_jmicron(ide_hwif_t *hwif)
{
- struct pci_dev *pdev = hwif->pci_dev;
+ struct pci_dev *pdev = to_pci_dev(hwif->dev);
u32 control;
u32 control5;
@@ -111,11 +108,7 @@ static void __devinit init_hwif_jmicron(ide_hwif_t *hwif)
hwif->set_pio_mode = &jmicron_set_pio_mode;
hwif->set_dma_mode = &jmicron_set_dma_mode;
- if (hwif->dma_base == 0)
- return;
-
- if (hwif->cbl != ATA_CBL_PATA40_SHORT)
- hwif->cbl = ata66_jmicron(hwif);
+ hwif->cable_detect = ata66_jmicron;
}
static const struct ide_port_info jmicron_chipset __devinitdata = {
diff --git a/drivers/ide/pci/ns87415.c b/drivers/ide/pci/ns87415.c
index d4df4642dbb..bf0d3b2931f 100644
--- a/drivers/ide/pci/ns87415.c
+++ b/drivers/ide/pci/ns87415.c
@@ -1,6 +1,4 @@
/*
- * linux/drivers/ide/pci/ns87415.c Version 2.00 Sep. 10, 2002
- *
* Copyright (C) 1997-1998 Mark Lord <mlord@pobox.com>
* Copyright (C) 1998 Eddie C. Dost <ecd@skynet.be>
* Copyright (C) 1999-2000 Andre Hedrick <andre@linux-ide.org>
@@ -12,11 +10,7 @@
#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/ioport.h>
#include <linux/interrupt.h>
-#include <linux/blkdev.h>
#include <linux/hdreg.h>
#include <linux/pci.h>
#include <linux/delay.h>
@@ -71,10 +65,9 @@ static u8 superio_ide_inb (unsigned long port)
static void __devinit superio_ide_init_iops (struct hwif_s *hwif)
{
+ struct pci_dev *pdev = to_pci_dev(hwif->dev);
u32 base, dmabase;
- u8 tmp;
- struct pci_dev *pdev = hwif->pci_dev;
- u8 port = hwif->channel;
+ u8 port = hwif->channel, tmp;
base = pci_resource_start(pdev, port * 2) & ~3;
dmabase = pci_resource_start(pdev, 4) & ~3;
@@ -93,10 +86,11 @@ static void __devinit superio_ide_init_iops (struct hwif_s *hwif)
static void __devinit init_iops_ns87415(ide_hwif_t *hwif)
{
- if (PCI_SLOT(hwif->pci_dev->devfn) == 0xE) {
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+
+ if (PCI_SLOT(dev->devfn) == 0xE)
/* Built-in - assume it's under superio. */
superio_ide_init_iops(hwif);
- }
}
#endif
@@ -110,8 +104,8 @@ static unsigned int ns87415_count = 0, ns87415_control[MAX_HWIFS] = { 0 };
static void ns87415_prepare_drive (ide_drive_t *drive, unsigned int use_dma)
{
ide_hwif_t *hwif = HWIF(drive);
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
unsigned int bit, other, new, *old = (unsigned int *) hwif->select_data;
- struct pci_dev *dev = hwif->pci_dev;
unsigned long flags;
local_irq_save(flags);
@@ -189,7 +183,7 @@ static int ns87415_ide_dma_setup(ide_drive_t *drive)
static void __devinit init_hwif_ns87415 (ide_hwif_t *hwif)
{
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
unsigned int ctrl, using_inta;
u8 progif;
#ifdef __sparc_v9__
@@ -231,8 +225,8 @@ static void __devinit init_hwif_ns87415 (ide_hwif_t *hwif)
#ifdef __sparc_v9__
/*
- * XXX: Reset the device, if we don't it will not respond
- * to SELECT_DRIVE() properly during first probe_hwif().
+ * XXX: Reset the device, if we don't it will not respond to
+ * SELECT_DRIVE() properly during first ide_probe_port().
*/
timeout = 10000;
outb(12, hwif->io_ports[IDE_CONTROL_OFFSET]);
diff --git a/drivers/ide/pci/opti621.c b/drivers/ide/pci/opti621.c
index 8953d9c3926..46e8748f507 100644
--- a/drivers/ide/pci/opti621.c
+++ b/drivers/ide/pci/opti621.c
@@ -1,6 +1,4 @@
/*
- * linux/drivers/ide/pci/opti621.c Version 0.9 Sep 24, 2007
- *
* Copyright (C) 1996-1998 Linus Torvalds & authors (see below)
*/
@@ -89,11 +87,6 @@
#include <linux/types.h>
#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/ioport.h>
-#include <linux/blkdev.h>
#include <linux/pci.h>
#include <linux/hdreg.h>
#include <linux/ide.h>
@@ -322,14 +315,18 @@ static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio)
spin_unlock_irqrestore(&opti621_lock, flags);
}
+static void __devinit opti621_port_init_devs(ide_hwif_t *hwif)
+{
+ hwif->drives[0].drive_data = PIO_DONT_KNOW;
+ hwif->drives[1].drive_data = PIO_DONT_KNOW;
+}
+
/*
* init_hwif_opti621() is called once for each hwif found at boot.
*/
static void __devinit init_hwif_opti621 (ide_hwif_t *hwif)
{
- hwif->drives[0].drive_data = PIO_DONT_KNOW;
- hwif->drives[1].drive_data = PIO_DONT_KNOW;
-
+ hwif->port_init_devs = opti621_port_init_devs;
hwif->set_pio_mode = &opti621_set_pio_mode;
}
diff --git a/drivers/ide/pci/pdc202xx_new.c b/drivers/ide/pci/pdc202xx_new.c
index 2b4f44e45a1..1c8cb7797a4 100644
--- a/drivers/ide/pci/pdc202xx_new.c
+++ b/drivers/ide/pci/pdc202xx_new.c
@@ -19,18 +19,12 @@
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/ioport.h>
-#include <linux/blkdev.h>
#include <linux/hdreg.h>
-#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/ide.h>
#include <asm/io.h>
-#include <asm/irq.h>
#ifdef CONFIG_PPC_PMAC
#include <asm/prom.h>
@@ -146,9 +140,10 @@ static struct udma_timing {
{ 0x1a, 0x01, 0xcb }, /* UDMA mode 6 */
};
-static void pdcnew_set_mode(ide_drive_t *drive, const u8 speed)
+static void pdcnew_set_dma_mode(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 adj = (drive->dn & 1) ? 0x08 : 0x00;
/*
@@ -159,48 +154,21 @@ static void pdcnew_set_mode(ide_drive_t *drive, const u8 speed)
* As we set up the PLL to output 133 MHz for UltraDMA/133 capable
* chips, we must override the default register settings...
*/
- if (max_dma_rate(hwif->pci_dev) == 4) {
+ if (max_dma_rate(dev) == 4) {
u8 mode = speed & 0x07;
- switch (speed) {
- case XFER_UDMA_6:
- case XFER_UDMA_5:
- case XFER_UDMA_4:
- case XFER_UDMA_3:
- case XFER_UDMA_2:
- case XFER_UDMA_1:
- case XFER_UDMA_0:
- set_indexed_reg(hwif, 0x10 + adj,
- udma_timings[mode].reg10);
- set_indexed_reg(hwif, 0x11 + adj,
- udma_timings[mode].reg11);
- set_indexed_reg(hwif, 0x12 + adj,
- udma_timings[mode].reg12);
- break;
-
- case XFER_MW_DMA_2:
- case XFER_MW_DMA_1:
- case XFER_MW_DMA_0:
- set_indexed_reg(hwif, 0x0e + adj,
- mwdma_timings[mode].reg0e);
- set_indexed_reg(hwif, 0x0f + adj,
- mwdma_timings[mode].reg0f);
- break;
- case XFER_PIO_4:
- case XFER_PIO_3:
- case XFER_PIO_2:
- case XFER_PIO_1:
- case XFER_PIO_0:
- set_indexed_reg(hwif, 0x0c + adj,
- pio_timings[mode].reg0c);
- set_indexed_reg(hwif, 0x0d + adj,
- pio_timings[mode].reg0d);
- set_indexed_reg(hwif, 0x13 + adj,
- pio_timings[mode].reg13);
- break;
- default:
- printk(KERN_ERR "pdc202xx_new: "
- "Unknown speed %d ignored\n", speed);
+ if (speed >= XFER_UDMA_0) {
+ set_indexed_reg(hwif, 0x10 + adj,
+ udma_timings[mode].reg10);
+ set_indexed_reg(hwif, 0x11 + adj,
+ udma_timings[mode].reg11);
+ set_indexed_reg(hwif, 0x12 + adj,
+ udma_timings[mode].reg12);
+ } else {
+ set_indexed_reg(hwif, 0x0e + adj,
+ mwdma_timings[mode].reg0e);
+ set_indexed_reg(hwif, 0x0f + adj,
+ mwdma_timings[mode].reg0f);
}
} else if (speed == XFER_UDMA_2) {
/* Set tHOLD bit to 0 if using UDMA mode 2 */
@@ -212,10 +180,18 @@ static void pdcnew_set_mode(ide_drive_t *drive, const u8 speed)
static void pdcnew_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
- pdcnew_set_mode(drive, XFER_PIO_0 + pio);
+ ide_hwif_t *hwif = drive->hwif;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+ u8 adj = (drive->dn & 1) ? 0x08 : 0x00;
+
+ if (max_dma_rate(dev) == 4) {
+ set_indexed_reg(hwif, 0x0c + adj, pio_timings[pio].reg0c);
+ set_indexed_reg(hwif, 0x0d + adj, pio_timings[pio].reg0d);
+ set_indexed_reg(hwif, 0x13 + adj, pio_timings[pio].reg13);
+ }
}
-static u8 pdcnew_cable_detect(ide_hwif_t *hwif)
+static u8 __devinit pdcnew_cable_detect(ide_hwif_t *hwif)
{
if (get_indexed_reg(hwif, 0x0b) & 0x04)
return ATA_CBL_PATA40;
@@ -223,14 +199,17 @@ static u8 pdcnew_cable_detect(ide_hwif_t *hwif)
return ATA_CBL_PATA80;
}
-static int pdcnew_quirkproc(ide_drive_t *drive)
+static void pdcnew_quirkproc(ide_drive_t *drive)
{
const char **list, *model = drive->id->model;
for (list = pdc_quirk_drives; *list != NULL; list++)
- if (strstr(model, *list) != NULL)
- return 2;
- return 0;
+ if (strstr(model, *list) != NULL) {
+ drive->quirk_list = 2;
+ return;
+ }
+
+ drive->quirk_list = 0;
}
static void pdcnew_reset(ide_drive_t *drive)
@@ -466,16 +445,12 @@ static unsigned int __devinit init_chipset_pdcnew(struct pci_dev *dev, const cha
static void __devinit init_hwif_pdc202new(ide_hwif_t *hwif)
{
hwif->set_pio_mode = &pdcnew_set_pio_mode;
- hwif->set_dma_mode = &pdcnew_set_mode;
+ hwif->set_dma_mode = &pdcnew_set_dma_mode;
hwif->quirkproc = &pdcnew_quirkproc;
hwif->resetproc = &pdcnew_reset;
- if (hwif->dma_base == 0)
- return;
-
- if (hwif->cbl != ATA_CBL_PATA40_SHORT)
- hwif->cbl = pdcnew_cable_detect(hwif);
+ hwif->cable_detect = pdcnew_cable_detect;
}
static struct pci_dev * __devinit pdc20270_get_dev2(struct pci_dev *dev)
diff --git a/drivers/ide/pci/pdc202xx_old.c b/drivers/ide/pci/pdc202xx_old.c
index e09742e2ba5..da432979038 100644
--- a/drivers/ide/pci/pdc202xx_old.c
+++ b/drivers/ide/pci/pdc202xx_old.c
@@ -1,6 +1,4 @@
/*
- * linux/drivers/ide/pci/pdc202xx_old.c Version 0.52 Aug 27, 2007
- *
* Copyright (C) 1998-2002 Andre Hedrick <andre@linux-ide.org>
* Copyright (C) 2006-2007 MontaVista Software, Inc.
* Copyright (C) 2007 Bartlomiej Zolnierkiewicz
@@ -34,18 +32,13 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/ioport.h>
#include <linux/blkdev.h>
#include <linux/hdreg.h>
-#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/ide.h>
#include <asm/io.h>
-#include <asm/irq.h>
#define PDC202XX_DEBUG_DRIVE_INFO 0
@@ -66,7 +59,7 @@ static void pdc_old_disable_66MHz_clock(ide_hwif_t *);
static void pdc202xx_set_mode(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 drive_pci = 0x60 + (drive->dn << 2);
u8 AP = 0, BP = 0, CP = 0;
@@ -142,11 +135,12 @@ static void pdc202xx_set_pio_mode(ide_drive_t *drive, const u8 pio)
pdc202xx_set_mode(drive, XFER_PIO_0 + pio);
}
-static u8 pdc202xx_old_cable_detect (ide_hwif_t *hwif)
+static u8 __devinit pdc2026x_old_cable_detect(ide_hwif_t *hwif)
{
- u16 CIS = 0, mask = (hwif->channel) ? (1<<11) : (1<<10);
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+ u16 CIS, mask = hwif->channel ? (1 << 11) : (1 << 10);
- pci_read_config_word(hwif->pci_dev, 0x50, &CIS);
+ pci_read_config_word(dev, 0x50, &CIS);
return (CIS & mask) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
}
@@ -162,7 +156,7 @@ static u8 pdc202xx_old_cable_detect (ide_hwif_t *hwif)
*/
static void pdc_old_enable_66MHz_clock(ide_hwif_t *hwif)
{
- unsigned long clock_reg = hwif->dma_master + 0x11;
+ unsigned long clock_reg = hwif->extra_base + 0x01;
u8 clock = inb(clock_reg);
outb(clock | (hwif->channel ? 0x08 : 0x02), clock_reg);
@@ -170,20 +164,23 @@ static void pdc_old_enable_66MHz_clock(ide_hwif_t *hwif)
static void pdc_old_disable_66MHz_clock(ide_hwif_t *hwif)
{
- unsigned long clock_reg = hwif->dma_master + 0x11;
+ unsigned long clock_reg = hwif->extra_base + 0x01;
u8 clock = inb(clock_reg);
outb(clock & ~(hwif->channel ? 0x08 : 0x02), clock_reg);
}
-static int pdc202xx_quirkproc (ide_drive_t *drive)
+static void pdc202xx_quirkproc(ide_drive_t *drive)
{
const char **list, *model = drive->id->model;
for (list = pdc_quirk_drives; *list != NULL; list++)
- if (strstr(model, *list) != NULL)
- return 2;
- return 0;
+ if (strstr(model, *list) != NULL) {
+ drive->quirk_list = 2;
+ return;
+ }
+
+ drive->quirk_list = 0;
}
static void pdc202xx_old_ide_dma_start(ide_drive_t *drive)
@@ -193,7 +190,7 @@ static void pdc202xx_old_ide_dma_start(ide_drive_t *drive)
if (drive->media != ide_disk || drive->addressing == 1) {
struct request *rq = HWGROUP(drive)->rq;
ide_hwif_t *hwif = HWIF(drive);
- unsigned long high_16 = hwif->dma_master;
+ unsigned long high_16 = hwif->extra_base - 16;
unsigned long atapi_reg = high_16 + (hwif->channel ? 0x24 : 0x20);
u32 word_count = 0;
u8 clock = inb(high_16 + 0x11);
@@ -212,7 +209,7 @@ static int pdc202xx_old_ide_dma_end(ide_drive_t *drive)
{
if (drive->media != ide_disk || drive->addressing == 1) {
ide_hwif_t *hwif = HWIF(drive);
- unsigned long high_16 = hwif->dma_master;
+ unsigned long high_16 = hwif->extra_base - 16;
unsigned long atapi_reg = high_16 + (hwif->channel ? 0x24 : 0x20);
u8 clock = 0;
@@ -228,7 +225,7 @@ static int pdc202xx_old_ide_dma_end(ide_drive_t *drive)
static int pdc202xx_old_ide_dma_test_irq(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
- unsigned long high_16 = hwif->dma_master;
+ unsigned long high_16 = hwif->extra_base - 16;
u8 dma_stat = inb(hwif->dma_status);
u8 sc1d = inb(high_16 + 0x001d);
@@ -271,7 +268,7 @@ static void pdc202xx_dma_timeout(ide_drive_t *drive)
static void pdc202xx_reset_host (ide_hwif_t *hwif)
{
- unsigned long high_16 = hwif->dma_master;
+ unsigned long high_16 = hwif->extra_base - 16;
u8 udma_speed_flag = inb(high_16 | 0x001f);
outb(udma_speed_flag | 0x10, high_16 | 0x001f);
@@ -302,24 +299,26 @@ static unsigned int __devinit init_chipset_pdc202xx(struct pci_dev *dev,
static void __devinit init_hwif_pdc202xx(ide_hwif_t *hwif)
{
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+
hwif->set_pio_mode = &pdc202xx_set_pio_mode;
hwif->set_dma_mode = &pdc202xx_set_mode;
hwif->quirkproc = &pdc202xx_quirkproc;
- if (hwif->pci_dev->device != PCI_DEVICE_ID_PROMISE_20246)
+ if (dev->device != PCI_DEVICE_ID_PROMISE_20246) {
hwif->resetproc = &pdc202xx_reset;
+ hwif->cable_detect = pdc2026x_old_cable_detect;
+ }
+
if (hwif->dma_base == 0)
return;
hwif->dma_lost_irq = &pdc202xx_dma_lost_irq;
hwif->dma_timeout = &pdc202xx_dma_timeout;
- if (hwif->pci_dev->device != PCI_DEVICE_ID_PROMISE_20246) {
- if (hwif->cbl != ATA_CBL_PATA40_SHORT)
- hwif->cbl = pdc202xx_old_cable_detect(hwif);
-
+ if (dev->device != PCI_DEVICE_ID_PROMISE_20246) {
hwif->dma_start = &pdc202xx_old_ide_dma_start;
hwif->ide_dma_end = &pdc202xx_old_ide_dma_end;
}
@@ -331,7 +330,7 @@ static void __devinit init_dma_pdc202xx(ide_hwif_t *hwif, unsigned long dmabase)
u8 udma_speed_flag = 0, primary_mode = 0, secondary_mode = 0;
if (hwif->channel) {
- ide_setup_dma(hwif, dmabase, 8);
+ ide_setup_dma(hwif, dmabase);
return;
}
@@ -355,7 +354,7 @@ static void __devinit init_dma_pdc202xx(ide_hwif_t *hwif, unsigned long dmabase)
}
#endif /* CONFIG_PDC202XX_BURST */
- ide_setup_dma(hwif, dmabase, 8);
+ ide_setup_dma(hwif, dmabase);
}
static void __devinit pdc202ata4_fixup_irq(struct pci_dev *dev,
@@ -375,6 +374,11 @@ static void __devinit pdc202ata4_fixup_irq(struct pci_dev *dev,
}
}
+#define IDE_HFLAGS_PDC202XX \
+ (IDE_HFLAG_ERROR_STOPS_FIFO | \
+ IDE_HFLAG_ABUSE_SET_DMA_MODE | \
+ IDE_HFLAG_OFF_BOARD)
+
#define DECLARE_PDC2026X_DEV(name_str, udma, extra_flags) \
{ \
.name = name_str, \
@@ -382,9 +386,7 @@ static void __devinit pdc202ata4_fixup_irq(struct pci_dev *dev,
.init_hwif = init_hwif_pdc202xx, \
.init_dma = init_dma_pdc202xx, \
.extra = 48, \
- .host_flags = IDE_HFLAG_ERROR_STOPS_FIFO | \
- extra_flags | \
- IDE_HFLAG_OFF_BOARD, \
+ .host_flags = IDE_HFLAGS_PDC202XX | extra_flags, \
.pio_mask = ATA_PIO4, \
.mwdma_mask = ATA_MWDMA2, \
.udma_mask = udma, \
@@ -397,8 +399,7 @@ static const struct ide_port_info pdc202xx_chipsets[] __devinitdata = {
.init_hwif = init_hwif_pdc202xx,
.init_dma = init_dma_pdc202xx,
.extra = 16,
- .host_flags = IDE_HFLAG_ERROR_STOPS_FIFO |
- IDE_HFLAG_OFF_BOARD,
+ .host_flags = IDE_HFLAGS_PDC202XX,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = ATA_UDMA2,
diff --git a/drivers/ide/pci/piix.c b/drivers/ide/pci/piix.c
index 27781d294ce..decef0f4767 100644
--- a/drivers/ide/pci/piix.c
+++ b/drivers/ide/pci/piix.c
@@ -1,6 +1,4 @@
/*
- * linux/drivers/ide/pci/piix.c Version 0.54 Sep 5, 2007
- *
* Copyright (C) 1998-1999 Andrzej Krzysztofowicz, Author and Maintainer
* Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org>
* Copyright (C) 2003 Red Hat Inc <alan@redhat.com>
@@ -8,53 +6,8 @@
*
* May be copied or modified under the terms of the GNU General Public License
*
- * PIO mode setting function for Intel chipsets.
- * For use instead of BIOS settings.
- *
- * 40-41
- * 42-43
- *
- * 41
- * 43
- *
- * | PIO 0 | c0 | 80 | 0 |
- * | PIO 2 | SW2 | d0 | 90 | 4 |
- * | PIO 3 | MW1 | e1 | a1 | 9 |
- * | PIO 4 | MW2 | e3 | a3 | b |
- *
- * sitre = word40 & 0x4000; primary
- * sitre = word42 & 0x4000; secondary
- *
- * 44 8421|8421 hdd|hdb
- *
- * 48 8421 hdd|hdc|hdb|hda udma enabled
- *
- * 0001 hda
- * 0010 hdb
- * 0100 hdc
- * 1000 hdd
- *
- * 4a 84|21 hdb|hda
- * 4b 84|21 hdd|hdc
- *
- * ata-33/82371AB
- * ata-33/82371EB
- * ata-33/82801AB ata-66/82801AA
- * 00|00 udma 0 00|00 reserved
- * 01|01 udma 1 01|01 udma 3
- * 10|10 udma 2 10|10 udma 4
- * 11|11 reserved 11|11 reserved
+ * Documentation:
*
- * 54 8421|8421 ata66 drive|ata66 enable
- *
- * pci_read_config_word(HWIF(drive)->pci_dev, 0x40, &reg40);
- * pci_read_config_word(HWIF(drive)->pci_dev, 0x42, &reg42);
- * pci_read_config_word(HWIF(drive)->pci_dev, 0x44, &reg44);
- * pci_read_config_byte(HWIF(drive)->pci_dev, 0x48, &reg48);
- * pci_read_config_word(HWIF(drive)->pci_dev, 0x4a, &reg4a);
- * pci_read_config_byte(HWIF(drive)->pci_dev, 0x54, &reg54);
- *
- * Documentation
* Publically available from Intel web site. Errata documentation
* is also publically available. As an aide to anyone hacking on this
* driver the list of errata that are relevant is below.going back to
@@ -94,11 +47,9 @@
#include <linux/types.h>
#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/ioport.h>
#include <linux/pci.h>
#include <linux/hdreg.h>
#include <linux/ide.h>
-#include <linux/delay.h>
#include <linux/init.h>
#include <asm/io.h>
@@ -116,7 +67,7 @@ static int no_piix_dma;
static void piix_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
int is_slave = drive->dn & 1;
int master_port = hwif->channel ? 0x42 : 0x40;
int slave_port = 0x44;
@@ -185,7 +136,7 @@ static void piix_set_pio_mode(ide_drive_t *drive, const u8 pio)
static void piix_set_dma_mode(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 maslave = hwif->channel ? 0x42 : 0x40;
int a_speed = 3 << (drive->dn * 4);
int u_flag = 1 << drive->dn;
@@ -203,20 +154,11 @@ static void piix_set_dma_mode(ide_drive_t *drive, const u8 speed)
pci_read_config_byte(dev, 0x54, &reg54);
pci_read_config_byte(dev, 0x55, &reg55);
- switch(speed) {
- case XFER_UDMA_4:
- case XFER_UDMA_2: u_speed = 2 << (drive->dn * 4); break;
- case XFER_UDMA_5:
- case XFER_UDMA_3:
- case XFER_UDMA_1: u_speed = 1 << (drive->dn * 4); break;
- case XFER_UDMA_0: u_speed = 0 << (drive->dn * 4); break;
- case XFER_MW_DMA_2:
- case XFER_MW_DMA_1:
- case XFER_SW_DMA_2: break;
- default: return;
- }
-
if (speed >= XFER_UDMA_0) {
+ u8 udma = speed - XFER_UDMA_0;
+
+ u_speed = min_t(u8, 2 - (udma & 1), udma) << (drive->dn * 4);
+
if (!(reg48 & u_flag))
pci_write_config_byte(dev, 0x48, reg48 | u_flag);
if (speed == XFER_UDMA_5) {
@@ -314,7 +256,7 @@ static const struct ich_laptop ich_laptop[] = {
static u8 __devinit piix_cable_detect(ide_hwif_t *hwif)
{
- struct pci_dev *pdev = hwif->pci_dev;
+ struct pci_dev *pdev = to_pci_dev(hwif->dev);
const struct ich_laptop *lap = &ich_laptop[0];
u8 reg54h = 0, mask = hwif->channel ? 0xc0 : 0x30;
@@ -346,14 +288,11 @@ static void __devinit init_hwif_piix(ide_hwif_t *hwif)
hwif->set_pio_mode = &piix_set_pio_mode;
hwif->set_dma_mode = &piix_set_dma_mode;
+ hwif->cable_detect = piix_cable_detect;
+
if (!hwif->dma_base)
return;
- if (hwif->ultra_mask & 0x78) {
- if (hwif->cbl != ATA_CBL_PATA40_SHORT)
- hwif->cbl = piix_cable_detect(hwif);
- }
-
if (no_piix_dma)
hwif->ultra_mask = hwif->mwdma_mask = hwif->swdma_mask = 0;
}
diff --git a/drivers/ide/pci/rz1000.c b/drivers/ide/pci/rz1000.c
index 6b10ae260fa..51676612f78 100644
--- a/drivers/ide/pci/rz1000.c
+++ b/drivers/ide/pci/rz1000.c
@@ -1,6 +1,4 @@
/*
- * linux/drivers/ide/pci/rz1000.c Version 0.06 January 12, 2003
- *
* Copyright (C) 1995-1998 Linus Torvalds & author (see below)
*/
@@ -18,22 +16,15 @@
#include <linux/types.h>
#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/ioport.h>
-#include <linux/blkdev.h>
#include <linux/hdreg.h>
#include <linux/pci.h>
#include <linux/ide.h>
#include <linux/init.h>
-#include <asm/io.h>
-
static void __devinit init_hwif_rz1000 (ide_hwif_t *hwif)
{
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
u16 reg;
- struct pci_dev *dev = hwif->pci_dev;
if (!pci_read_config_word (dev, 0x40, &reg) &&
!pci_write_config_word(dev, 0x40, reg & 0xdfff)) {
@@ -42,8 +33,7 @@ static void __devinit init_hwif_rz1000 (ide_hwif_t *hwif)
} else {
if (hwif->mate)
hwif->mate->serialized = hwif->serialized = 1;
- hwif->drives[0].no_unmask = 1;
- hwif->drives[1].no_unmask = 1;
+ hwif->host_flags |= IDE_HFLAG_NO_UNMASK_IRQS;
printk(KERN_INFO "%s: serialized, disabled unmasking "
"(buggy RZ1000/RZ1001)\n", hwif->name);
}
diff --git a/drivers/ide/pci/sc1200.c b/drivers/ide/pci/sc1200.c
index 707d5ff66b0..561aa47c772 100644
--- a/drivers/ide/pci/sc1200.c
+++ b/drivers/ide/pci/sc1200.c
@@ -1,6 +1,4 @@
/*
- * linux/drivers/ide/pci/sc1200.c Version 0.97 Aug 3 2007
- *
* Copyright (C) 2000-2002 Mark Lord <mlord@pobox.com>
* Copyright (C) 2007 Bartlomiej Zolnierkiewicz
*
@@ -16,19 +14,13 @@
#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/ioport.h>
-#include <linux/blkdev.h>
#include <linux/hdreg.h>
-#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/ide.h>
#include <linux/pm.h>
+
#include <asm/io.h>
-#include <asm/irq.h>
#define SC1200_REV_A 0x00
#define SC1200_REV_B1 0x01
@@ -87,7 +79,7 @@ static const unsigned int sc1200_pio_timings[4][5] =
static void sc1200_tunepio(ide_drive_t *drive, u8 pio)
{
ide_hwif_t *hwif = drive->hwif;
- struct pci_dev *pdev = hwif->pci_dev;
+ struct pci_dev *pdev = to_pci_dev(hwif->dev);
unsigned int basereg = hwif->channel ? 0x50 : 0x40, format = 0;
pci_read_config_dword(pdev, basereg + 4, &format);
@@ -130,72 +122,42 @@ out:
static void sc1200_set_dma_mode(ide_drive_t *drive, const u8 mode)
{
ide_hwif_t *hwif = HWIF(drive);
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
int unit = drive->select.b.unit;
unsigned int reg, timings;
unsigned short pci_clock;
unsigned int basereg = hwif->channel ? 0x50 : 0x40;
+ static const u32 udma_timing[3][3] = {
+ { 0x00921250, 0x00911140, 0x00911030 },
+ { 0x00932470, 0x00922260, 0x00922140 },
+ { 0x009436a1, 0x00933481, 0x00923261 },
+ };
+
+ static const u32 mwdma_timing[3][3] = {
+ { 0x00077771, 0x00012121, 0x00002020 },
+ { 0x000bbbb2, 0x00024241, 0x00013131 },
+ { 0x000ffff3, 0x00035352, 0x00015151 },
+ };
+
pci_clock = sc1200_get_pci_clock();
/*
* Note that each DMA mode has several timings associated with it.
* The correct timing depends on the fast PCI clock freq.
*/
- timings = 0;
- switch (mode) {
- case XFER_UDMA_0:
- switch (pci_clock) {
- case PCI_CLK_33: timings = 0x00921250; break;
- case PCI_CLK_48: timings = 0x00932470; break;
- case PCI_CLK_66: timings = 0x009436a1; break;
- }
- break;
- case XFER_UDMA_1:
- switch (pci_clock) {
- case PCI_CLK_33: timings = 0x00911140; break;
- case PCI_CLK_48: timings = 0x00922260; break;
- case PCI_CLK_66: timings = 0x00933481; break;
- }
- break;
- case XFER_UDMA_2:
- switch (pci_clock) {
- case PCI_CLK_33: timings = 0x00911030; break;
- case PCI_CLK_48: timings = 0x00922140; break;
- case PCI_CLK_66: timings = 0x00923261; break;
- }
- break;
- case XFER_MW_DMA_0:
- switch (pci_clock) {
- case PCI_CLK_33: timings = 0x00077771; break;
- case PCI_CLK_48: timings = 0x000bbbb2; break;
- case PCI_CLK_66: timings = 0x000ffff3; break;
- }
- break;
- case XFER_MW_DMA_1:
- switch (pci_clock) {
- case PCI_CLK_33: timings = 0x00012121; break;
- case PCI_CLK_48: timings = 0x00024241; break;
- case PCI_CLK_66: timings = 0x00035352; break;
- }
- break;
- case XFER_MW_DMA_2:
- switch (pci_clock) {
- case PCI_CLK_33: timings = 0x00002020; break;
- case PCI_CLK_48: timings = 0x00013131; break;
- case PCI_CLK_66: timings = 0x00015151; break;
- }
- break;
- default:
- return;
- }
+
+ if (mode >= XFER_UDMA_0)
+ timings = udma_timing[pci_clock][mode - XFER_UDMA_0];
+ else
+ timings = mwdma_timing[pci_clock][mode - XFER_MW_DMA_0];
if (unit == 0) { /* are we configuring drive0? */
- pci_read_config_dword(hwif->pci_dev, basereg+4, &reg);
+ pci_read_config_dword(dev, basereg + 4, &reg);
timings |= reg & 0x80000000; /* preserve PIO format bit */
- pci_write_config_dword(hwif->pci_dev, basereg+4, timings);
- } else {
- pci_write_config_dword(hwif->pci_dev, basereg+12, timings);
- }
+ pci_write_config_dword(dev, basereg + 4, timings);
+ } else
+ pci_write_config_dword(dev, basereg + 12, timings);
}
/* Replacement for the standard ide_dma_end action in
@@ -250,9 +212,9 @@ static void sc1200_set_pio_mode(ide_drive_t *drive, const u8 pio)
}
if (mode != -1) {
printk("SC1200: %s: changing (U)DMA mode\n", drive->name);
- hwif->dma_off_quietly(drive);
- if (ide_set_dma_mode(drive, mode) == 0)
- hwif->dma_host_on(drive);
+ ide_dma_off_quietly(drive);
+ if (ide_set_dma_mode(drive, mode) == 0 && drive->using_dma)
+ hwif->dma_host_set(drive, 1);
return;
}
@@ -260,66 +222,39 @@ static void sc1200_set_pio_mode(ide_drive_t *drive, const u8 pio)
}
#ifdef CONFIG_PM
-static ide_hwif_t *lookup_pci_dev (ide_hwif_t *prev, struct pci_dev *dev)
-{
- int h;
-
- for (h = 0; h < MAX_HWIFS; h++) {
- ide_hwif_t *hwif = &ide_hwifs[h];
- if (prev) {
- if (hwif == prev)
- prev = NULL; // found previous, now look for next match
- } else {
- if (hwif && hwif->pci_dev == dev)
- return hwif; // found next match
- }
- }
- return NULL; // not found
-}
-
-typedef struct sc1200_saved_state_s {
- __u32 regs[4];
-} sc1200_saved_state_t;
-
+struct sc1200_saved_state {
+ u32 regs[8];
+};
static int sc1200_suspend (struct pci_dev *dev, pm_message_t state)
{
- ide_hwif_t *hwif = NULL;
-
printk("SC1200: suspend(%u)\n", state.event);
+ /*
+ * we only save state when going from full power to less
+ */
if (state.event == PM_EVENT_ON) {
- // we only save state when going from full power to less
-
- //
- // Loop over all interfaces that are part of this PCI device:
- //
- while ((hwif = lookup_pci_dev(hwif, dev)) != NULL) {
- sc1200_saved_state_t *ss;
- unsigned int basereg, r;
- //
- // allocate a permanent save area, if not already allocated
- //
- ss = (sc1200_saved_state_t *)hwif->config_data;
- if (ss == NULL) {
- ss = kmalloc(sizeof(sc1200_saved_state_t), GFP_KERNEL);
- if (ss == NULL)
- return -ENOMEM;
- hwif->config_data = (unsigned long)ss;
- }
- ss = (sc1200_saved_state_t *)hwif->config_data;
- //
- // Save timing registers: this may be unnecessary if
- // BIOS also does it
- //
- basereg = hwif->channel ? 0x50 : 0x40;
- for (r = 0; r < 4; ++r) {
- pci_read_config_dword (hwif->pci_dev, basereg + (r<<2), &ss->regs[r]);
- }
+ struct sc1200_saved_state *ss;
+ unsigned int r;
+
+ /*
+ * allocate a permanent save area, if not already allocated
+ */
+ ss = (struct sc1200_saved_state *)pci_get_drvdata(dev);
+ if (ss == NULL) {
+ ss = kmalloc(sizeof(*ss), GFP_KERNEL);
+ if (ss == NULL)
+ return -ENOMEM;
+ pci_set_drvdata(dev, ss);
}
- }
- /* You don't need to iterate over disks -- sysfs should have done that for you already */
+ /*
+ * save timing registers
+ * (this may be unnecessary if BIOS also does it)
+ */
+ for (r = 0; r < 8; r++)
+ pci_read_config_dword(dev, 0x40 + r * 4, &ss->regs[r]);
+ }
pci_disable_device(dev);
pci_set_power_state(dev, pci_choose_state(dev, state));
@@ -328,30 +263,25 @@ static int sc1200_suspend (struct pci_dev *dev, pm_message_t state)
static int sc1200_resume (struct pci_dev *dev)
{
- ide_hwif_t *hwif = NULL;
- int i;
+ struct sc1200_saved_state *ss;
+ unsigned int r;
+ int i;
i = pci_enable_device(dev);
if (i)
return i;
- //
- // loop over all interfaces that are part of this pci device:
- //
- while ((hwif = lookup_pci_dev(hwif, dev)) != NULL) {
- unsigned int basereg, r;
- sc1200_saved_state_t *ss = (sc1200_saved_state_t *)hwif->config_data;
-
- //
- // Restore timing registers: this may be unnecessary if BIOS also does it
- //
- basereg = hwif->channel ? 0x50 : 0x40;
- if (ss != NULL) {
- for (r = 0; r < 4; ++r) {
- pci_write_config_dword(hwif->pci_dev, basereg + (r<<2), ss->regs[r]);
- }
- }
+ ss = (struct sc1200_saved_state *)pci_get_drvdata(dev);
+
+ /*
+ * restore timing registers
+ * (this may be unnecessary if BIOS also does it)
+ */
+ if (ss) {
+ for (r = 0; r < 8; r++)
+ pci_write_config_dword(dev, 0x40 + r * 4, ss->regs[r]);
}
+
return 0;
}
#endif
diff --git a/drivers/ide/pci/scc_pata.c b/drivers/ide/pci/scc_pata.c
index ebb7132b9b8..238e3e181e8 100644
--- a/drivers/ide/pci/scc_pata.c
+++ b/drivers/ide/pci/scc_pata.c
@@ -254,19 +254,7 @@ static void scc_set_dma_mode(ide_drive_t *drive, const u8 speed)
offset = 0; /* 100MHz */
}
- switch (speed) {
- case XFER_UDMA_6:
- case XFER_UDMA_5:
- case XFER_UDMA_4:
- case XFER_UDMA_3:
- case XFER_UDMA_2:
- case XFER_UDMA_1:
- case XFER_UDMA_0:
- idx = speed - XFER_UDMA_0;
- break;
- default:
- return;
- }
+ idx = speed - XFER_UDMA_0;
jcactsel = JCACTSELtbl[offset][idx];
if (is_slave) {
@@ -606,7 +594,7 @@ static int __devinit init_setup_scc(struct pci_dev *dev,
static void __devinit init_mmio_iops_scc(ide_hwif_t *hwif)
{
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
struct scc_ports *ports = pci_get_drvdata(dev);
unsigned long dma_base = ports->dma;
@@ -632,7 +620,7 @@ static void __devinit init_mmio_iops_scc(ide_hwif_t *hwif)
hwif->io_ports[IDE_STATUS_OFFSET] = dma_base + 0x3c;
hwif->io_ports[IDE_CONTROL_OFFSET] = dma_base + 0x40;
- hwif->irq = hwif->pci_dev->irq;
+ hwif->irq = dev->irq;
hwif->dma_base = dma_base;
hwif->config_data = ports->ctl;
hwif->mmio = 1;
@@ -648,13 +636,19 @@ static void __devinit init_mmio_iops_scc(ide_hwif_t *hwif)
static void __devinit init_iops_scc(ide_hwif_t *hwif)
{
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+
hwif->hwif_data = NULL;
if (pci_get_drvdata(dev) == NULL)
return;
init_mmio_iops_scc(hwif);
}
+static u8 __devinit scc_cable_detect(ide_hwif_t *hwif)
+{
+ return ATA_CBL_PATA80;
+}
+
/**
* init_hwif_scc - set up hwif
* @hwif: interface to set up
@@ -689,8 +683,7 @@ static void __devinit init_hwif_scc(ide_hwif_t *hwif)
else
hwif->ultra_mask = ATA_UDMA5; /* 100MHz */
- /* we support 80c cable only. */
- hwif->cbl = ATA_CBL_PATA80;
+ hwif->cable_detect = scc_cable_detect;
}
#define DECLARE_SCC_DEV(name_str) \
@@ -738,14 +731,12 @@ static void __devexit scc_remove(struct pci_dev *dev)
unsigned long dma_size = pci_resource_len(dev, 1);
if (hwif->dmatable_cpu) {
- pci_free_consistent(hwif->pci_dev,
- PRD_ENTRIES * PRD_BYTES,
- hwif->dmatable_cpu,
- hwif->dmatable_dma);
+ pci_free_consistent(dev, PRD_ENTRIES * PRD_BYTES,
+ hwif->dmatable_cpu, hwif->dmatable_dma);
hwif->dmatable_cpu = NULL;
}
- ide_unregister(hwif->index);
+ ide_unregister(hwif->index, 0, 0);
hwif->chipset = ide_unknown;
iounmap((void*)ports->dma);
diff --git a/drivers/ide/pci/serverworks.c b/drivers/ide/pci/serverworks.c
index a7280311357..c11880b0709 100644
--- a/drivers/ide/pci/serverworks.c
+++ b/drivers/ide/pci/serverworks.c
@@ -1,6 +1,4 @@
/*
- * linux/drivers/ide/pci/serverworks.c Version 0.22 Jun 27 2007
- *
* Copyright (C) 1998-2000 Michel Aubry
* Copyright (C) 1998-2000 Andrzej Krzysztofowicz
* Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org>
@@ -33,12 +31,10 @@
#include <linux/types.h>
#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/ioport.h>
#include <linux/pci.h>
#include <linux/hdreg.h>
#include <linux/ide.h>
#include <linux/init.h>
-#include <linux/delay.h>
#include <asm/io.h>
@@ -67,7 +63,7 @@ static int check_in_drive_lists (ide_drive_t *drive, const char **list)
static u8 svwks_udma_filter(ide_drive_t *drive)
{
- struct pci_dev *dev = HWIF(drive)->pci_dev;
+ struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
u8 mask = 0;
if (dev->device == PCI_DEVICE_ID_SERVERWORKS_HT1000IDE)
@@ -130,7 +126,7 @@ static void svwks_set_pio_mode(ide_drive_t *drive, const u8 pio)
static const u8 pio_modes[] = { 0x5d, 0x47, 0x34, 0x22, 0x20 };
static const u8 drive_pci[] = { 0x41, 0x40, 0x43, 0x42 };
- struct pci_dev *dev = drive->hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
pci_write_config_byte(dev, drive_pci[drive->dn], pio_modes[pio]);
@@ -153,7 +149,7 @@ static void svwks_set_dma_mode(ide_drive_t *drive, const u8 speed)
static const u8 drive_pci2[] = { 0x45, 0x44, 0x47, 0x46 };
ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 unit = (drive->select.b.unit & 0x01);
u8 ultra_enable = 0, ultra_timing = 0, dma_timing = 0;
@@ -164,25 +160,12 @@ static void svwks_set_dma_mode(ide_drive_t *drive, const u8 speed)
ultra_timing &= ~(0x0F << (4*unit));
ultra_enable &= ~(0x01 << drive->dn);
- switch(speed) {
- case XFER_MW_DMA_2:
- case XFER_MW_DMA_1:
- case XFER_MW_DMA_0:
- dma_timing |= dma_modes[speed - XFER_MW_DMA_0];
- break;
-
- case XFER_UDMA_5:
- case XFER_UDMA_4:
- case XFER_UDMA_3:
- case XFER_UDMA_2:
- case XFER_UDMA_1:
- case XFER_UDMA_0:
- dma_timing |= dma_modes[2];
- ultra_timing |= ((udma_modes[speed - XFER_UDMA_0]) << (4*unit));
- ultra_enable |= (0x01 << drive->dn);
- default:
- break;
- }
+ if (speed >= XFER_UDMA_0) {
+ dma_timing |= dma_modes[2];
+ ultra_timing |= (udma_modes[speed - XFER_UDMA_0] << (4 * unit));
+ ultra_enable |= (0x01 << drive->dn);
+ } else if (speed >= XFER_MW_DMA_0)
+ dma_timing |= dma_modes[speed - XFER_MW_DMA_0];
pci_write_config_byte(dev, drive_pci2[drive->dn], dma_timing);
pci_write_config_byte(dev, (0x56|hwif->channel), ultra_timing);
@@ -300,7 +283,8 @@ static u8 __devinit ata66_svwks_svwks(ide_hwif_t *hwif)
*/
static u8 __devinit ata66_svwks_dell(ide_hwif_t *hwif)
{
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+
if (dev->subsystem_vendor == PCI_VENDOR_ID_DELL &&
dev->vendor == PCI_VENDOR_ID_SERVERWORKS &&
(dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5IDE ||
@@ -318,7 +302,8 @@ static u8 __devinit ata66_svwks_dell(ide_hwif_t *hwif)
*/
static u8 __devinit ata66_svwks_cobalt(ide_hwif_t *hwif)
{
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+
if (dev->subsystem_vendor == PCI_VENDOR_ID_SUN &&
dev->vendor == PCI_VENDOR_ID_SERVERWORKS &&
dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5IDE)
@@ -329,7 +314,7 @@ static u8 __devinit ata66_svwks_cobalt(ide_hwif_t *hwif)
static u8 __devinit ata66_svwks(ide_hwif_t *hwif)
{
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
/* Server Works */
if (dev->subsystem_vendor == PCI_VENDOR_ID_SERVERWORKS)
@@ -353,25 +338,27 @@ static u8 __devinit ata66_svwks(ide_hwif_t *hwif)
static void __devinit init_hwif_svwks (ide_hwif_t *hwif)
{
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+
hwif->set_pio_mode = &svwks_set_pio_mode;
hwif->set_dma_mode = &svwks_set_dma_mode;
hwif->udma_filter = &svwks_udma_filter;
- if (!hwif->dma_base)
- return;
-
- if (hwif->pci_dev->device != PCI_DEVICE_ID_SERVERWORKS_OSB4IDE) {
- if (hwif->cbl != ATA_CBL_PATA40_SHORT)
- hwif->cbl = ata66_svwks(hwif);
- }
+ if (dev->device != PCI_DEVICE_ID_SERVERWORKS_OSB4IDE)
+ hwif->cable_detect = ata66_svwks;
}
+#define IDE_HFLAGS_SVWKS \
+ (IDE_HFLAG_LEGACY_IRQS | \
+ IDE_HFLAG_ABUSE_SET_DMA_MODE | \
+ IDE_HFLAG_BOOTABLE)
+
static const struct ide_port_info serverworks_chipsets[] __devinitdata = {
{ /* 0 */
.name = "SvrWks OSB4",
.init_chipset = init_chipset_svwks,
.init_hwif = init_hwif_svwks,
- .host_flags = IDE_HFLAG_LEGACY_IRQS | IDE_HFLAG_BOOTABLE,
+ .host_flags = IDE_HFLAGS_SVWKS,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = 0x00, /* UDMA is problematic on OSB4 */
@@ -379,7 +366,7 @@ static const struct ide_port_info serverworks_chipsets[] __devinitdata = {
.name = "SvrWks CSB5",
.init_chipset = init_chipset_svwks,
.init_hwif = init_hwif_svwks,
- .host_flags = IDE_HFLAG_LEGACY_IRQS | IDE_HFLAG_BOOTABLE,
+ .host_flags = IDE_HFLAGS_SVWKS,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = ATA_UDMA5,
@@ -387,7 +374,7 @@ static const struct ide_port_info serverworks_chipsets[] __devinitdata = {
.name = "SvrWks CSB6",
.init_chipset = init_chipset_svwks,
.init_hwif = init_hwif_svwks,
- .host_flags = IDE_HFLAG_LEGACY_IRQS | IDE_HFLAG_BOOTABLE,
+ .host_flags = IDE_HFLAGS_SVWKS,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = ATA_UDMA5,
@@ -395,8 +382,7 @@ static const struct ide_port_info serverworks_chipsets[] __devinitdata = {
.name = "SvrWks CSB6",
.init_chipset = init_chipset_svwks,
.init_hwif = init_hwif_svwks,
- .host_flags = IDE_HFLAG_LEGACY_IRQS | IDE_HFLAG_SINGLE |
- IDE_HFLAG_BOOTABLE,
+ .host_flags = IDE_HFLAGS_SVWKS | IDE_HFLAG_SINGLE,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = ATA_UDMA5,
@@ -404,8 +390,7 @@ static const struct ide_port_info serverworks_chipsets[] __devinitdata = {
.name = "SvrWks HT1000",
.init_chipset = init_chipset_svwks,
.init_hwif = init_hwif_svwks,
- .host_flags = IDE_HFLAG_LEGACY_IRQS | IDE_HFLAG_SINGLE |
- IDE_HFLAG_BOOTABLE,
+ .host_flags = IDE_HFLAGS_SVWKS | IDE_HFLAG_SINGLE,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = ATA_UDMA5,
@@ -428,7 +413,9 @@ static int __devinit svwks_init_one(struct pci_dev *dev, const struct pci_device
d = serverworks_chipsets[idx];
- if (idx == 2 || idx == 3) {
+ if (idx == 1)
+ d.host_flags |= IDE_HFLAG_CLEAR_SIMPLEX;
+ else if (idx == 2 || idx == 3) {
if ((PCI_FUNC(dev->devfn) & 1) == 0) {
if (pci_resource_start(dev, 0) != 0x01f1)
d.host_flags &= ~IDE_HFLAG_BOOTABLE;
diff --git a/drivers/ide/pci/sgiioc4.c b/drivers/ide/pci/sgiioc4.c
index de820aa58cd..054626497be 100644
--- a/drivers/ide/pci/sgiioc4.c
+++ b/drivers/ide/pci/sgiioc4.c
@@ -25,8 +25,6 @@
#include <linux/hdreg.h>
#include <linux/init.h>
#include <linux/kernel.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
#include <linux/ioport.h>
#include <linux/blkdev.h>
#include <linux/scatterlist.h>
@@ -159,6 +157,7 @@ sgiioc4_clearirq(ide_drive_t * drive)
}
if (intr_reg & 0x02) {
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
/* Error when transferring DMA data on PCI bus */
u32 pci_err_addr_low, pci_err_addr_high,
pci_stat_cmd_reg;
@@ -167,7 +166,7 @@ sgiioc4_clearirq(ide_drive_t * drive)
readl((void __iomem *)hwif->io_ports[IDE_IRQ_OFFSET]);
pci_err_addr_high =
readl((void __iomem *)(hwif->io_ports[IDE_IRQ_OFFSET] + 4));
- pci_read_config_dword(hwif->pci_dev, PCI_COMMAND,
+ pci_read_config_dword(dev, PCI_COMMAND,
&pci_stat_cmd_reg);
printk(KERN_ERR
"%s(%s) : PCI Bus Error when doing DMA:"
@@ -178,8 +177,7 @@ sgiioc4_clearirq(ide_drive_t * drive)
__FUNCTION__, drive->name,
pci_err_addr_high, pci_err_addr_low);
/* Clear the PCI Error indicator */
- pci_write_config_dword(hwif->pci_dev, PCI_COMMAND,
- 0x00000146);
+ pci_write_config_dword(dev, PCI_COMMAND, 0x00000146);
}
/* Clear the Interrupt, Error bits on the IOC4 */
@@ -277,21 +275,6 @@ sgiioc4_ide_dma_end(ide_drive_t * drive)
return dma_stat;
}
-static int
-sgiioc4_ide_dma_on(ide_drive_t * drive)
-{
- drive->using_dma = 1;
-
- return 0;
-}
-
-static void sgiioc4_dma_off_quietly(ide_drive_t *drive)
-{
- drive->using_dma = 0;
-
- drive->hwif->dma_host_off(drive);
-}
-
static void sgiioc4_set_dma_mode(ide_drive_t *drive, const u8 speed)
{
}
@@ -303,13 +286,10 @@ sgiioc4_ide_dma_test_irq(ide_drive_t * drive)
return sgiioc4_checkirq(HWIF(drive));
}
-static void sgiioc4_dma_host_on(ide_drive_t * drive)
+static void sgiioc4_dma_host_set(ide_drive_t *drive, int on)
{
-}
-
-static void sgiioc4_dma_host_off(ide_drive_t * drive)
-{
- sgiioc4_clearirq(drive);
+ if (!on)
+ sgiioc4_clearirq(drive);
}
static void
@@ -352,6 +332,7 @@ sgiioc4_INB(unsigned long port)
static int __devinit
ide_dma_sgiioc4(ide_hwif_t * hwif, unsigned long dma_base)
{
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
void __iomem *virt_dma_base;
int num_ports = sizeof (ioc4_dma_regs_t);
void *pad;
@@ -377,7 +358,7 @@ ide_dma_sgiioc4(ide_hwif_t * hwif, unsigned long dma_base)
}
hwif->dma_base = (unsigned long) virt_dma_base;
- hwif->dmatable_cpu = pci_alloc_consistent(hwif->pci_dev,
+ hwif->dmatable_cpu = pci_alloc_consistent(dev,
IOC4_PRD_ENTRIES * IOC4_PRD_BYTES,
&hwif->dmatable_dma);
@@ -386,7 +367,7 @@ ide_dma_sgiioc4(ide_hwif_t * hwif, unsigned long dma_base)
hwif->sg_max_nents = IOC4_PRD_ENTRIES;
- pad = pci_alloc_consistent(hwif->pci_dev, IOC4_IDE_CACHELINE_SIZE,
+ pad = pci_alloc_consistent(dev, IOC4_IDE_CACHELINE_SIZE,
(dma_addr_t *) &(hwif->dma_status));
if (pad) {
@@ -394,8 +375,7 @@ ide_dma_sgiioc4(ide_hwif_t * hwif, unsigned long dma_base)
return 0;
}
- pci_free_consistent(hwif->pci_dev,
- IOC4_PRD_ENTRIES * IOC4_PRD_BYTES,
+ pci_free_consistent(dev, IOC4_PRD_ENTRIES * IOC4_PRD_BYTES,
hwif->dmatable_cpu, hwif->dmatable_dma);
printk(KERN_INFO
"%s() -- Error! Unable to allocate DMA Maps for drive %s\n",
@@ -535,8 +515,7 @@ sgiioc4_build_dma_table(ide_drive_t * drive, struct request *rq, int ddir)
}
use_pio_instead:
- pci_unmap_sg(hwif->pci_dev, hwif->sg_table, hwif->sg_nents,
- hwif->sg_dma_direction);
+ ide_destroy_dmatable(drive);
return 0; /* revert to PIO for this request */
}
@@ -574,7 +553,6 @@ static void __devinit
ide_init_sgiioc4(ide_hwif_t * hwif)
{
hwif->mmio = 1;
- hwif->pio_mask = 0x00;
hwif->set_pio_mode = NULL; /* Sets timing for PIO mode */
hwif->set_dma_mode = &sgiioc4_set_dma_mode;
hwif->selectproc = NULL;/* Use the default routine to select drive */
@@ -582,7 +560,6 @@ ide_init_sgiioc4(ide_hwif_t * hwif)
hwif->pre_reset = NULL; /* No HBA specific pre_set needed */
hwif->resetproc = &sgiioc4_resetproc;/* Reset DMA engine,
clear interrupts */
- hwif->intrproc = NULL; /* Enable or Disable interrupt from drive */
hwif->maskproc = &sgiioc4_maskproc; /* Mask on/off NIEN register */
hwif->quirkproc = NULL;
hwif->busproc = NULL;
@@ -592,20 +569,22 @@ ide_init_sgiioc4(ide_hwif_t * hwif)
if (hwif->dma_base == 0)
return;
- hwif->mwdma_mask = ATA_MWDMA2_ONLY;
-
+ hwif->dma_host_set = &sgiioc4_dma_host_set;
hwif->dma_setup = &sgiioc4_ide_dma_setup;
hwif->dma_start = &sgiioc4_ide_dma_start;
hwif->ide_dma_end = &sgiioc4_ide_dma_end;
- hwif->ide_dma_on = &sgiioc4_ide_dma_on;
- hwif->dma_off_quietly = &sgiioc4_dma_off_quietly;
hwif->ide_dma_test_irq = &sgiioc4_ide_dma_test_irq;
- hwif->dma_host_on = &sgiioc4_dma_host_on;
- hwif->dma_host_off = &sgiioc4_dma_host_off;
hwif->dma_lost_irq = &sgiioc4_dma_lost_irq;
hwif->dma_timeout = &ide_dma_timeout;
}
+static const struct ide_port_info sgiioc4_port_info __devinitdata = {
+ .chipset = ide_pci,
+ .host_flags = IDE_HFLAG_NO_DMA | /* no SFF-style DMA */
+ IDE_HFLAG_NO_AUTOTUNE,
+ .mwdma_mask = ATA_MWDMA2_ONLY,
+};
+
static int __devinit
sgiioc4_ide_setup_pci_device(struct pci_dev *dev)
{
@@ -615,6 +594,8 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev)
ide_hwif_t *hwif;
int h;
u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
+ hw_regs_t hw;
+ struct ide_port_info d = sgiioc4_port_info;
/*
* Find an empty HWIF; if none available, return -ENOMEM.
@@ -654,21 +635,15 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev)
return -ENOMEM;
}
- if (hwif->io_ports[IDE_DATA_OFFSET] != cmd_base) {
- hw_regs_t hw;
+ /* Initialize the IO registers */
+ memset(&hw, 0, sizeof(hw));
+ sgiioc4_init_hwif_ports(&hw, cmd_base, ctl, irqport);
+ hw.irq = dev->irq;
+ hw.chipset = ide_pci;
+ hw.dev = &dev->dev;
+ ide_init_port_hw(hwif, &hw);
- /* Initialize the IO registers */
- memset(&hw, 0, sizeof(hw));
- sgiioc4_init_hwif_ports(&hw, cmd_base, ctl, irqport);
- memcpy(hwif->io_ports, hw.io_ports, sizeof(hwif->io_ports));
- hwif->noprobe = !hwif->io_ports[IDE_DATA_OFFSET];
- }
-
- hwif->irq = dev->irq;
- hwif->chipset = ide_pci;
- hwif->pci_dev = dev;
- hwif->channel = 0; /* Single Channel chip */
- hwif->gendev.parent = &dev->dev;/* setup proper ancestral information */
+ hwif->dev = &dev->dev;
/* The IOC4 uses MMIO rather than Port IO. */
default_hwif_mmiops(hwif);
@@ -676,15 +651,17 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev)
/* Initializing chipset IRQ Registers */
writel(0x03, (void __iomem *)(irqport + IOC4_INTR_SET * 4));
- if (dma_base == 0 || ide_dma_sgiioc4(hwif, dma_base))
+ if (dma_base == 0 || ide_dma_sgiioc4(hwif, dma_base)) {
printk(KERN_INFO "%s: %s Bus-Master DMA disabled\n",
hwif->name, DRV_NAME);
+ d.mwdma_mask = 0;
+ }
ide_init_sgiioc4(hwif);
idx[0] = hwif->index;
- if (ide_device_add(idx))
+ if (ide_device_add(idx, &d))
return -EIO;
return 0;
diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c
index 5709c252543..cc4be9621bc 100644
--- a/drivers/ide/pci/siimage.c
+++ b/drivers/ide/pci/siimage.c
@@ -1,6 +1,4 @@
/*
- * linux/drivers/ide/pci/siimage.c Version 1.19 Nov 16 2007
- *
* Copyright (C) 2001-2002 Andre Hedrick <andre@linux-ide.org>
* Copyright (C) 2003 Red Hat <alan@redhat.com>
* Copyright (C) 2007 MontaVista Software, Inc.
@@ -41,7 +39,6 @@
#include <linux/types.h>
#include <linux/module.h>
#include <linux/pci.h>
-#include <linux/delay.h>
#include <linux/hdreg.h>
#include <linux/ide.h>
#include <linux/init.h>
@@ -79,7 +76,7 @@ static int pdev_is_sata(struct pci_dev *pdev)
static inline int is_sata(ide_hwif_t *hwif)
{
- return pdev_is_sata(hwif->pci_dev);
+ return pdev_is_sata(to_pci_dev(hwif->dev));
}
/**
@@ -140,13 +137,14 @@ static inline unsigned long siimage_seldev(ide_drive_t *drive, int r)
static u8 sil_pata_udma_filter(ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
unsigned long base = (unsigned long) hwif->hwif_data;
u8 mask = 0, scsc = 0;
if (hwif->mmio)
scsc = hwif->INB(base + 0x4A);
else
- pci_read_config_byte(hwif->pci_dev, 0x8A, &scsc);
+ pci_read_config_byte(dev, 0x8A, &scsc);
if ((scsc & 0x30) == 0x10) /* 133 */
mask = ATA_UDMA6;
@@ -219,19 +217,21 @@ static void sil_set_pio_mode(ide_drive_t *drive, u8 pio)
mode |= (unit ? 0x10 : 0x01);
hwif->OUTB(mode, base + addr_mask);
} else {
- pci_write_config_word(hwif->pci_dev, addr, speedp);
- pci_write_config_word(hwif->pci_dev, tfaddr, speedt);
- pci_read_config_word(hwif->pci_dev, tfaddr-2, &speedp);
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+
+ pci_write_config_word(dev, addr, speedp);
+ pci_write_config_word(dev, tfaddr, speedt);
+ pci_read_config_word(dev, tfaddr - 2, &speedp);
speedp &= ~0x200;
/* Set IORDY for mode 3 or 4 */
if (pio > 2)
speedp |= 0x200;
- pci_write_config_word(hwif->pci_dev, tfaddr-2, speedp);
+ pci_write_config_word(dev, tfaddr - 2, speedp);
- pci_read_config_byte(hwif->pci_dev, addr_mask, &mode);
+ pci_read_config_byte(dev, addr_mask, &mode);
mode &= ~(unit ? 0x30 : 0x03);
mode |= (unit ? 0x10 : 0x01);
- pci_write_config_byte(hwif->pci_dev, addr_mask, mode);
+ pci_write_config_byte(dev, addr_mask, mode);
}
}
@@ -250,6 +250,7 @@ static void sil_set_dma_mode(ide_drive_t *drive, const u8 speed)
u16 dma[] = { 0x2208, 0x10C2, 0x10C1 };
ide_hwif_t *hwif = HWIF(drive);
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
u16 ultra = 0, multi = 0;
u8 mode = 0, unit = drive->select.b.unit;
unsigned long base = (unsigned long)hwif->hwif_data;
@@ -266,10 +267,10 @@ static void sil_set_dma_mode(ide_drive_t *drive, const u8 speed)
multi = hwif->INW(ma);
ultra = hwif->INW(ua);
} else {
- pci_read_config_byte(hwif->pci_dev, 0x8A, &scsc);
- pci_read_config_byte(hwif->pci_dev, addr_mask, &mode);
- pci_read_config_word(hwif->pci_dev, ma, &multi);
- pci_read_config_word(hwif->pci_dev, ua, &ultra);
+ pci_read_config_byte(dev, 0x8A, &scsc);
+ pci_read_config_byte(dev, addr_mask, &mode);
+ pci_read_config_word(dev, ma, &multi);
+ pci_read_config_word(dev, ua, &ultra);
}
mode &= ~((unit) ? 0x30 : 0x03);
@@ -278,27 +279,14 @@ static void sil_set_dma_mode(ide_drive_t *drive, const u8 speed)
scsc = is_sata(hwif) ? 1 : scsc;
- switch(speed) {
- case XFER_MW_DMA_2:
- case XFER_MW_DMA_1:
- case XFER_MW_DMA_0:
- multi = dma[speed - XFER_MW_DMA_0];
- mode |= ((unit) ? 0x20 : 0x02);
- break;
- case XFER_UDMA_6:
- case XFER_UDMA_5:
- case XFER_UDMA_4:
- case XFER_UDMA_3:
- case XFER_UDMA_2:
- case XFER_UDMA_1:
- case XFER_UDMA_0:
- multi = dma[2];
- ultra |= ((scsc) ? (ultra6[speed - XFER_UDMA_0]) :
- (ultra5[speed - XFER_UDMA_0]));
- mode |= ((unit) ? 0x30 : 0x03);
- break;
- default:
- return;
+ if (speed >= XFER_UDMA_0) {
+ multi = dma[2];
+ ultra |= (scsc ? ultra6[speed - XFER_UDMA_0] :
+ ultra5[speed - XFER_UDMA_0]);
+ mode |= (unit ? 0x30 : 0x03);
+ } else {
+ multi = dma[speed - XFER_MW_DMA_0];
+ mode |= (unit ? 0x20 : 0x02);
}
if (hwif->mmio) {
@@ -306,9 +294,9 @@ static void sil_set_dma_mode(ide_drive_t *drive, const u8 speed)
hwif->OUTW(multi, ma);
hwif->OUTW(ultra, ua);
} else {
- pci_write_config_byte(hwif->pci_dev, addr_mask, mode);
- pci_write_config_word(hwif->pci_dev, ma, multi);
- pci_write_config_word(hwif->pci_dev, ua, ultra);
+ pci_write_config_byte(dev, addr_mask, mode);
+ pci_write_config_word(dev, ma, multi);
+ pci_write_config_word(dev, ua, ultra);
}
}
@@ -316,6 +304,7 @@ static void sil_set_dma_mode(ide_drive_t *drive, const u8 speed)
static int siimage_io_ide_dma_test_irq (ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 dma_altstat = 0;
unsigned long addr = siimage_selreg(hwif, 1);
@@ -324,7 +313,7 @@ static int siimage_io_ide_dma_test_irq (ide_drive_t *drive)
return 1;
/* return 1 if Device INTR asserted */
- pci_read_config_byte(hwif->pci_dev, addr, &dma_altstat);
+ pci_read_config_byte(dev, addr, &dma_altstat);
if (dma_altstat & 8)
return 0; //return 1;
return 0;
@@ -342,15 +331,18 @@ static int siimage_mmio_ide_dma_test_irq (ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
unsigned long addr = siimage_selreg(hwif, 0x1);
+ void __iomem *sata_error_addr
+ = (void __iomem *)hwif->sata_scr[SATA_ERROR_OFFSET];
- if (SATA_ERROR_REG) {
+ if (sata_error_addr) {
unsigned long base = (unsigned long)hwif->hwif_data;
-
u32 ext_stat = readl((void __iomem *)(base + 0x10));
u8 watchdog = 0;
+
if (ext_stat & ((hwif->channel) ? 0x40 : 0x10)) {
- u32 sata_error = readl((void __iomem *)SATA_ERROR_REG);
- writel(sata_error, (void __iomem *)SATA_ERROR_REG);
+ u32 sata_error = readl(sata_error_addr);
+
+ writel(sata_error, sata_error_addr);
watchdog = (sata_error & 0x00680000) ? 1 : 0;
printk(KERN_WARNING "%s: sata_error = 0x%08x, "
"watchdog = %d, %s\n",
@@ -390,13 +382,14 @@ static int siimage_mmio_ide_dma_test_irq (ide_drive_t *drive)
static int sil_sata_busproc(ide_drive_t * drive, int state)
{
ide_hwif_t *hwif = HWIF(drive);
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
u32 stat_config = 0;
unsigned long addr = siimage_selreg(hwif, 0);
if (hwif->mmio)
stat_config = readl((void __iomem *)addr);
else
- pci_read_config_dword(hwif->pci_dev, addr, &stat_config);
+ pci_read_config_dword(dev, addr, &stat_config);
switch (state) {
case BUSSTATE_ON:
@@ -428,13 +421,17 @@ static int sil_sata_busproc(ide_drive_t * drive, int state)
static int sil_sata_reset_poll(ide_drive_t *drive)
{
- if (SATA_STATUS_REG) {
- ide_hwif_t *hwif = HWIF(drive);
+ ide_hwif_t *hwif = drive->hwif;
+ void __iomem *sata_status_addr
+ = (void __iomem *)hwif->sata_scr[SATA_STATUS_OFFSET];
- /* SATA_STATUS_REG is valid only when in MMIO mode */
- if ((readl((void __iomem *)SATA_STATUS_REG) & 0x03) != 0x03) {
+ if (sata_status_addr) {
+ /* SATA Status is available only when in MMIO mode */
+ u32 sata_stat = readl(sata_status_addr);
+
+ if ((sata_stat & 0x03) != 0x03) {
printk(KERN_WARNING "%s: reset phy dead, status=0x%08x\n",
- hwif->name, readl((void __iomem *)SATA_STATUS_REG));
+ hwif->name, sata_stat);
HWGROUP(drive)->polling = 0;
return ide_started;
}
@@ -656,7 +653,7 @@ static unsigned int __devinit init_chipset_siimage(struct pci_dev *dev, const ch
static void __devinit init_mmio_iops_siimage(ide_hwif_t *hwif)
{
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
void *addr = pci_get_drvdata(dev);
u8 ch = hwif->channel;
hw_regs_t hw;
@@ -707,9 +704,6 @@ static void __devinit init_mmio_iops_siimage(ide_hwif_t *hwif)
hwif->sata_scr[SATA_STATUS_OFFSET] = base + 0x104;
hwif->sata_scr[SATA_ERROR_OFFSET] = base + 0x108;
hwif->sata_scr[SATA_CONTROL_OFFSET] = base + 0x100;
- hwif->sata_misc[SATA_MISC_OFFSET] = base + 0x140;
- hwif->sata_misc[SATA_PHY_OFFSET] = base + 0x144;
- hwif->sata_misc[SATA_IEN_OFFSET] = base + 0x148;
}
memcpy(hwif->io_ports, hw.io_ports, sizeof(hwif->io_ports));
@@ -726,9 +720,6 @@ static int is_dev_seagate_sata(ide_drive_t *drive)
const char *s = &drive->id->model[0];
unsigned len;
- if (!drive->present)
- return 0;
-
len = strnlen(s, sizeof(drive->id->model));
if ((len > 4) && (!memcmp(s, "ST", 2))) {
@@ -743,18 +734,20 @@ static int is_dev_seagate_sata(ide_drive_t *drive)
}
/**
- * siimage_fixup - post probe fixups
- * @hwif: interface to fix up
+ * sil_quirkproc - post probe fixups
+ * @drive: drive
*
* Called after drive probe we use this to decide whether the
* Seagate fixup must be applied. This used to be in init_iops but
* that can occur before we know what drives are present.
*/
-static void __devinit siimage_fixup(ide_hwif_t *hwif)
+static void __devinit sil_quirkproc(ide_drive_t *drive)
{
+ ide_hwif_t *hwif = drive->hwif;
+
/* Try and raise the rqsize */
- if (!is_sata(hwif) || !is_dev_seagate_sata(&hwif->drives[0]))
+ if (!is_sata(hwif) || !is_dev_seagate_sata(drive))
hwif->rqsize = 128;
}
@@ -770,12 +763,14 @@ static void __devinit siimage_fixup(ide_hwif_t *hwif)
static void __devinit init_iops_siimage(ide_hwif_t *hwif)
{
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+
hwif->hwif_data = NULL;
/* Pessimal until we finish probing */
hwif->rqsize = 15;
- if (pci_get_drvdata(hwif->pci_dev) == NULL)
+ if (pci_get_drvdata(dev) == NULL)
return;
init_mmio_iops_siimage(hwif);
@@ -791,11 +786,12 @@ static void __devinit init_iops_siimage(ide_hwif_t *hwif)
static u8 __devinit ata66_siimage(ide_hwif_t *hwif)
{
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
unsigned long addr = siimage_selreg(hwif, 0);
u8 ata66 = 0;
- if (pci_get_drvdata(hwif->pci_dev) == NULL)
- pci_read_config_byte(hwif->pci_dev, addr, &ata66);
+ if (pci_get_drvdata(dev) == NULL)
+ pci_read_config_byte(dev, addr, &ata66);
else
ata66 = hwif->INB(addr);
@@ -817,6 +813,7 @@ static void __devinit init_hwif_siimage(ide_hwif_t *hwif)
hwif->set_pio_mode = &sil_set_pio_mode;
hwif->set_dma_mode = &sil_set_dma_mode;
+ hwif->quirkproc = &sil_quirkproc;
if (sata) {
static int first = 1;
@@ -833,15 +830,14 @@ static void __devinit init_hwif_siimage(ide_hwif_t *hwif)
} else
hwif->udma_filter = &sil_pata_udma_filter;
+ hwif->cable_detect = ata66_siimage;
+
if (hwif->dma_base == 0)
return;
if (sata)
hwif->host_flags |= IDE_HFLAG_NO_ATAPI_DMA;
- if (hwif->cbl != ATA_CBL_PATA40_SHORT)
- hwif->cbl = ata66_siimage(hwif);
-
if (hwif->mmio) {
hwif->ide_dma_test_irq = &siimage_mmio_ide_dma_test_irq;
} else {
@@ -855,7 +851,6 @@ static void __devinit init_hwif_siimage(ide_hwif_t *hwif)
.init_chipset = init_chipset_siimage, \
.init_iops = init_iops_siimage, \
.init_hwif = init_hwif_siimage, \
- .fixup = siimage_fixup, \
.host_flags = IDE_HFLAG_BOOTABLE, \
.pio_mask = ATA_PIO4, \
.mwdma_mask = ATA_MWDMA2, \
diff --git a/drivers/ide/pci/sis5513.c b/drivers/ide/pci/sis5513.c
index d90b4291777..512bb4c1fd5 100644
--- a/drivers/ide/pci/sis5513.c
+++ b/drivers/ide/pci/sis5513.c
@@ -1,6 +1,4 @@
/*
- * linux/drivers/ide/pci/sis5513.c Version 0.31 Aug 9, 2007
- *
* Copyright (C) 1999-2000 Andre Hedrick <andre@linux-ide.org>
* Copyright (C) 2002 Lionel Bouton <Lionel.Bouton@inet6.fr>, Maintainer
* Copyright (C) 2003 Vojtech Pavlik <vojtech@suse.cz>
@@ -49,20 +47,11 @@
#include <linux/types.h>
#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/ioport.h>
-#include <linux/blkdev.h>
#include <linux/hdreg.h>
-
-#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/ide.h>
-#include <asm/irq.h>
-
#include "ide-timing.h"
/* registers layout and init values are chipset family dependant */
@@ -197,7 +186,7 @@ static char* chipset_capability[] = {
static u8 sis_ata133_get_base(ide_drive_t *drive)
{
- struct pci_dev *dev = drive->hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
u32 reg54 = 0;
pci_read_config_dword(dev, 0x54, &reg54);
@@ -207,7 +196,7 @@ static u8 sis_ata133_get_base(ide_drive_t *drive)
static void sis_ata16_program_timings(ide_drive_t *drive, const u8 mode)
{
- struct pci_dev *dev = drive->hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
u16 t1 = 0;
u8 drive_pci = 0x40 + drive->dn * 2;
@@ -230,7 +219,7 @@ static void sis_ata16_program_timings(ide_drive_t *drive, const u8 mode)
static void sis_ata100_program_timings(ide_drive_t *drive, const u8 mode)
{
- struct pci_dev *dev = drive->hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
u8 t1, drive_pci = 0x40 + drive->dn * 2;
/* timing bits: 7:4 active 3:0 recovery */
@@ -253,7 +242,7 @@ static void sis_ata100_program_timings(ide_drive_t *drive, const u8 mode)
static void sis_ata133_program_timings(ide_drive_t *drive, const u8 mode)
{
- struct pci_dev *dev = drive->hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
u32 t1 = 0;
u8 drive_pci = sis_ata133_get_base(drive), clk, idx;
@@ -286,7 +275,7 @@ static void sis_program_timings(ide_drive_t *drive, const u8 mode)
static void config_drive_art_rwp (ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 reg4bh = 0;
u8 rw_prefetch = 0;
@@ -305,64 +294,61 @@ static void sis_set_pio_mode(ide_drive_t *drive, const u8 pio)
sis_program_timings(drive, XFER_PIO_0 + pio);
}
+static void sis_ata133_program_udma_timings(ide_drive_t *drive, const u8 mode)
+{
+ struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
+ u32 regdw = 0;
+ u8 drive_pci = sis_ata133_get_base(drive), clk, idx;
+
+ pci_read_config_dword(dev, drive_pci, &regdw);
+
+ regdw |= 0x04;
+ regdw &= 0xfffff00f;
+ /* check if ATA133 enable */
+ clk = (regdw & 0x08) ? ATA_133 : ATA_100;
+ idx = mode - XFER_UDMA_0;
+ regdw |= cycle_time_value[clk][idx] << 4;
+ regdw |= cvs_time_value[clk][idx] << 8;
+
+ pci_write_config_dword(dev, drive_pci, regdw);
+}
+
+static void sis_ata33_program_udma_timings(ide_drive_t *drive, const u8 mode)
+{
+ struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
+ u8 drive_pci = 0x40 + drive->dn * 2, reg = 0, i = chipset_family;
+
+ pci_read_config_byte(dev, drive_pci + 1, &reg);
+
+ /* force the UDMA bit on if we want to use UDMA */
+ reg |= 0x80;
+ /* clean reg cycle time bits */
+ reg &= ~((0xff >> (8 - cycle_time_range[i])) << cycle_time_offset[i]);
+ /* set reg cycle time bits */
+ reg |= cycle_time_value[i][mode - XFER_UDMA_0] << cycle_time_offset[i];
+
+ pci_write_config_byte(dev, drive_pci + 1, reg);
+}
+
+static void sis_program_udma_timings(ide_drive_t *drive, const u8 mode)
+{
+ if (chipset_family >= ATA_133) /* ATA_133 */
+ sis_ata133_program_udma_timings(drive, mode);
+ else /* ATA_33/66/100a/100/133a */
+ sis_ata33_program_udma_timings(drive, mode);
+}
+
static void sis_set_dma_mode(ide_drive_t *drive, const u8 speed)
{
- ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = hwif->pci_dev;
-
- /* Config chip for mode */
- switch(speed) {
- case XFER_UDMA_6:
- case XFER_UDMA_5:
- case XFER_UDMA_4:
- case XFER_UDMA_3:
- case XFER_UDMA_2:
- case XFER_UDMA_1:
- case XFER_UDMA_0:
- if (chipset_family >= ATA_133) {
- u32 regdw = 0;
- u8 drive_pci = sis_ata133_get_base(drive);
-
- pci_read_config_dword(dev, drive_pci, &regdw);
- regdw |= 0x04;
- regdw &= 0xfffff00f;
- /* check if ATA133 enable */
- if (regdw & 0x08) {
- regdw |= (unsigned long)cycle_time_value[ATA_133][speed-XFER_UDMA_0] << 4;
- regdw |= (unsigned long)cvs_time_value[ATA_133][speed-XFER_UDMA_0] << 8;
- } else {
- regdw |= (unsigned long)cycle_time_value[ATA_100][speed-XFER_UDMA_0] << 4;
- regdw |= (unsigned long)cvs_time_value[ATA_100][speed-XFER_UDMA_0] << 8;
- }
- pci_write_config_dword(dev, (unsigned long)drive_pci, regdw);
- } else {
- u8 drive_pci = 0x40 + drive->dn * 2, reg = 0;
-
- pci_read_config_byte(dev, drive_pci+1, &reg);
- /* Force the UDMA bit on if we want to use UDMA */
- reg |= 0x80;
- /* clean reg cycle time bits */
- reg &= ~((0xFF >> (8 - cycle_time_range[chipset_family]))
- << cycle_time_offset[chipset_family]);
- /* set reg cycle time bits */
- reg |= cycle_time_value[chipset_family][speed-XFER_UDMA_0]
- << cycle_time_offset[chipset_family];
- pci_write_config_byte(dev, drive_pci+1, reg);
- }
- break;
- case XFER_MW_DMA_2:
- case XFER_MW_DMA_1:
- case XFER_MW_DMA_0:
- sis_program_timings(drive, speed);
- break;
- default:
- break;
- }
+ if (speed >= XFER_UDMA_0)
+ sis_program_udma_timings(drive, speed);
+ else
+ sis_program_timings(drive, speed);
}
static u8 sis5513_ata133_udma_filter(ide_drive_t *drive)
{
- struct pci_dev *dev = drive->hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
u32 regdw = 0;
u8 drive_pci = sis_ata133_get_base(drive);
@@ -533,7 +519,7 @@ static const struct sis_laptop sis_laptop[] = {
static u8 __devinit ata66_sis5513(ide_hwif_t *hwif)
{
- struct pci_dev *pdev = hwif->pci_dev;
+ struct pci_dev *pdev = to_pci_dev(hwif->dev);
const struct sis_laptop *lap = &sis_laptop[0];
u8 ata66 = 0;
@@ -548,12 +534,12 @@ static u8 __devinit ata66_sis5513(ide_hwif_t *hwif)
if (chipset_family >= ATA_133) {
u16 regw = 0;
u16 reg_addr = hwif->channel ? 0x52: 0x50;
- pci_read_config_word(hwif->pci_dev, reg_addr, &regw);
+ pci_read_config_word(pdev, reg_addr, &regw);
ata66 = (regw & 0x8000) ? 0 : 1;
} else if (chipset_family >= ATA_66) {
u8 reg48h = 0;
u8 mask = hwif->channel ? 0x20 : 0x10;
- pci_read_config_byte(hwif->pci_dev, 0x48, &reg48h);
+ pci_read_config_byte(pdev, 0x48, &reg48h);
ata66 = (reg48h & mask) ? 0 : 1;
}
@@ -570,13 +556,12 @@ static void __devinit init_hwif_sis5513 (ide_hwif_t *hwif)
if (chipset_family >= ATA_133)
hwif->udma_filter = sis5513_ata133_udma_filter;
+ hwif->cable_detect = ata66_sis5513;
+
if (hwif->dma_base == 0)
return;
hwif->ultra_mask = udma_rates[chipset_family];
-
- if (hwif->cbl != ATA_CBL_PATA40_SHORT)
- hwif->cbl = ata66_sis5513(hwif);
}
static const struct ide_port_info sis5513_chipset __devinitdata = {
diff --git a/drivers/ide/pci/sl82c105.c b/drivers/ide/pci/sl82c105.c
index 147d783f752..ee261ae15b6 100644
--- a/drivers/ide/pci/sl82c105.c
+++ b/drivers/ide/pci/sl82c105.c
@@ -1,6 +1,4 @@
/*
- * linux/drivers/ide/pci/sl82c105.c
- *
* SL82C105/Winbond 553 IDE driver
*
* Maintainer unknown.
@@ -13,22 +11,17 @@
* -- Benjamin Herrenschmidt (01/11/03) benh@kernel.crashing.org
*
* Copyright (C) 2006-2007 MontaVista Software, Inc. <source@mvista.com>
+ * Copyright (C) 2007 Bartlomiej Zolnierkiewicz
*/
#include <linux/types.h>
#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/blkdev.h>
#include <linux/hdreg.h>
#include <linux/pci.h>
#include <linux/ide.h>
#include <asm/io.h>
-#include <asm/dma.h>
#undef DEBUG
@@ -77,7 +70,7 @@ static unsigned int get_pio_timings(ide_drive_t *drive, u8 pio)
*/
static void sl82c105_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
- struct pci_dev *dev = HWIF(drive)->pci_dev;
+ struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
int reg = 0x44 + drive->dn * 4;
u16 drv_ctrl;
@@ -90,14 +83,8 @@ static void sl82c105_set_pio_mode(ide_drive_t *drive, const u8 pio)
drive->drive_data &= 0xffff0000;
drive->drive_data |= drv_ctrl;
- if (!drive->using_dma) {
- /*
- * If we are actually using MW DMA, then we can not
- * reprogram the interface drive control register.
- */
- pci_write_config_word(dev, reg, drv_ctrl);
- pci_read_config_word (dev, reg, &drv_ctrl);
- }
+ pci_write_config_word(dev, reg, drv_ctrl);
+ pci_read_config_word (dev, reg, &drv_ctrl);
printk(KERN_DEBUG "%s: selected %s (%dns) (%04X)\n", drive->name,
ide_xfer_verbose(pio + XFER_PIO_0),
@@ -115,33 +102,14 @@ static void sl82c105_set_dma_mode(ide_drive_t *drive, const u8 speed)
DBG(("sl82c105_tune_chipset(drive:%s, speed:%s)\n",
drive->name, ide_xfer_verbose(speed)));
- switch (speed) {
- case XFER_MW_DMA_2:
- case XFER_MW_DMA_1:
- case XFER_MW_DMA_0:
- drv_ctrl = mwdma_timings[speed - XFER_MW_DMA_0];
+ drv_ctrl = mwdma_timings[speed - XFER_MW_DMA_0];
- /*
- * Store the DMA timings so that we can actually program
- * them when DMA will be turned on...
- */
- drive->drive_data &= 0x0000ffff;
- drive->drive_data |= (unsigned long)drv_ctrl << 16;
-
- /*
- * If we are already using DMA, we just reprogram
- * the drive control register.
- */
- if (drive->using_dma) {
- struct pci_dev *dev = HWIF(drive)->pci_dev;
- int reg = 0x44 + drive->dn * 4;
-
- pci_write_config_word(dev, reg, drv_ctrl);
- }
- break;
- default:
- return;
- }
+ /*
+ * Store the DMA timings so that we can actually program
+ * them when DMA will be turned on...
+ */
+ drive->drive_data &= 0x0000ffff;
+ drive->drive_data |= (unsigned long)drv_ctrl << 16;
}
/*
@@ -171,7 +139,7 @@ static inline void sl82c105_reset_host(struct pci_dev *dev)
static void sl82c105_dma_lost_irq(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
u32 val, mask = hwif->channel ? CTRL_IDE_IRQB : CTRL_IDE_IRQA;
u8 dma_cmd;
@@ -208,7 +176,12 @@ static void sl82c105_dma_lost_irq(ide_drive_t *drive)
static void sl82c105_dma_start(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+ int reg = 0x44 + drive->dn * 4;
+
+ DBG(("%s(drive:%s)\n", __FUNCTION__, drive->name));
+
+ pci_write_config_word(dev, reg, drive->drive_data >> 16);
sl82c105_reset_host(dev);
ide_dma_start(drive);
@@ -216,80 +189,43 @@ static void sl82c105_dma_start(ide_drive_t *drive)
static void sl82c105_dma_timeout(ide_drive_t *drive)
{
+ struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
+
DBG(("sl82c105_dma_timeout(drive:%s)\n", drive->name));
- sl82c105_reset_host(HWIF(drive)->pci_dev);
+ sl82c105_reset_host(dev);
ide_dma_timeout(drive);
}
-static int sl82c105_ide_dma_on(ide_drive_t *drive)
+static int sl82c105_dma_end(ide_drive_t *drive)
{
- struct pci_dev *dev = HWIF(drive)->pci_dev;
- int rc, reg = 0x44 + drive->dn * 4;
-
- DBG(("sl82c105_ide_dma_on(drive:%s)\n", drive->name));
-
- rc = __ide_dma_on(drive);
- if (rc == 0) {
- pci_write_config_word(dev, reg, drive->drive_data >> 16);
-
- printk(KERN_INFO "%s: DMA enabled\n", drive->name);
- }
- return rc;
-}
-
-static void sl82c105_dma_off_quietly(ide_drive_t *drive)
-{
- struct pci_dev *dev = HWIF(drive)->pci_dev;
+ struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
int reg = 0x44 + drive->dn * 4;
+ int ret;
- DBG(("sl82c105_dma_off_quietly(drive:%s)\n", drive->name));
+ DBG(("%s(drive:%s)\n", __FUNCTION__, drive->name));
- pci_write_config_word(dev, reg, drive->drive_data);
+ ret = __ide_dma_end(drive);
- ide_dma_off_quietly(drive);
-}
+ pci_write_config_word(dev, reg, drive->drive_data);
-/*
- * Ok, that is nasty, but we must make sure the DMA timings
- * won't be used for a PIO access. The solution here is
- * to make sure the 16 bits mode is diabled on the channel
- * when DMA is enabled, thus causing the chip to use PIO0
- * timings for those operations.
- */
-static void sl82c105_selectproc(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = hwif->pci_dev;
- u32 val, old, mask;
-
- //DBG(("sl82c105_selectproc(drive:%s)\n", drive->name));
-
- mask = hwif->channel ? CTRL_P1F16 : CTRL_P0F16;
- old = val = (u32)pci_get_drvdata(dev);
- if (drive->using_dma)
- val &= ~mask;
- else
- val |= mask;
- if (old != val) {
- pci_write_config_dword(dev, 0x40, val);
- pci_set_drvdata(dev, (void *)val);
- }
+ return ret;
}
/*
* ATA reset will clear the 16 bits mode in the control
- * register, we need to update our cache
+ * register, we need to reprogram it
*/
static void sl82c105_resetproc(ide_drive_t *drive)
{
- struct pci_dev *dev = HWIF(drive)->pci_dev;
+ struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
u32 val;
DBG(("sl82c105_resetproc(drive:%s)\n", drive->name));
pci_read_config_dword(dev, 0x40, &val);
- pci_set_drvdata(dev, (void *)val);
+ val |= (CTRL_P1F16 | CTRL_P0F16);
+ pci_write_config_dword(dev, 0x40, val);
}
/*
@@ -342,7 +278,6 @@ static unsigned int __devinit init_chipset_sl82c105(struct pci_dev *dev, const c
pci_read_config_dword(dev, 0x40, &val);
val |= CTRL_P0EN | CTRL_P0F16 | CTRL_P1F16;
pci_write_config_dword(dev, 0x40, val);
- pci_set_drvdata(dev, (void *)val);
return dev->irq;
}
@@ -352,19 +287,19 @@ static unsigned int __devinit init_chipset_sl82c105(struct pci_dev *dev, const c
*/
static void __devinit init_hwif_sl82c105(ide_hwif_t *hwif)
{
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
unsigned int rev;
DBG(("init_hwif_sl82c105(hwif: ide%d)\n", hwif->index));
hwif->set_pio_mode = &sl82c105_set_pio_mode;
hwif->set_dma_mode = &sl82c105_set_dma_mode;
- hwif->selectproc = &sl82c105_selectproc;
hwif->resetproc = &sl82c105_resetproc;
if (!hwif->dma_base)
return;
- rev = sl82c105_bridge_revision(hwif->pci_dev);
+ rev = sl82c105_bridge_revision(dev);
if (rev <= 5) {
/*
* Never ever EVER under any circumstances enable
@@ -377,10 +312,9 @@ static void __devinit init_hwif_sl82c105(ide_hwif_t *hwif)
hwif->mwdma_mask = ATA_MWDMA2;
- hwif->ide_dma_on = &sl82c105_ide_dma_on;
- hwif->dma_off_quietly = &sl82c105_dma_off_quietly;
hwif->dma_lost_irq = &sl82c105_dma_lost_irq;
hwif->dma_start = &sl82c105_dma_start;
+ hwif->ide_dma_end = &sl82c105_dma_end;
hwif->dma_timeout = &sl82c105_dma_timeout;
if (hwif->mate)
diff --git a/drivers/ide/pci/slc90e66.c b/drivers/ide/pci/slc90e66.c
index eb4445b229e..65f4c2ffaa5 100644
--- a/drivers/ide/pci/slc90e66.c
+++ b/drivers/ide/pci/slc90e66.c
@@ -1,6 +1,4 @@
/*
- * linux/drivers/ide/pci/slc90e66.c Version 0.19 Sep 24, 2007
- *
* Copyright (C) 2000-2002 Andre Hedrick <andre@linux-ide.org>
* Copyright (C) 2006-2007 MontaVista Software, Inc. <source@mvista.com>
*
@@ -12,21 +10,17 @@
#include <linux/types.h>
#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/ioport.h>
#include <linux/pci.h>
#include <linux/hdreg.h>
#include <linux/ide.h>
-#include <linux/delay.h>
#include <linux/init.h>
-#include <asm/io.h>
-
static DEFINE_SPINLOCK(slc90e66_lock);
static void slc90e66_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
int is_slave = drive->dn & 1;
int master_port = hwif->channel ? 0x42 : 0x40;
int slave_port = 0x44;
@@ -79,7 +73,7 @@ static void slc90e66_set_pio_mode(ide_drive_t *drive, const u8 pio)
static void slc90e66_set_dma_mode(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 maslave = hwif->channel ? 0x42 : 0x40;
int sitre = 0, a_speed = 7 << (drive->dn * 4);
int u_speed = 0, u_flag = 1 << drive->dn;
@@ -91,19 +85,9 @@ static void slc90e66_set_dma_mode(ide_drive_t *drive, const u8 speed)
pci_read_config_word(dev, 0x48, &reg48);
pci_read_config_word(dev, 0x4a, &reg4a);
- switch(speed) {
- case XFER_UDMA_4: u_speed = 4 << (drive->dn * 4); break;
- case XFER_UDMA_3: u_speed = 3 << (drive->dn * 4); break;
- case XFER_UDMA_2: u_speed = 2 << (drive->dn * 4); break;
- case XFER_UDMA_1: u_speed = 1 << (drive->dn * 4); break;
- case XFER_UDMA_0: u_speed = 0 << (drive->dn * 4); break;
- case XFER_MW_DMA_2:
- case XFER_MW_DMA_1:
- case XFER_SW_DMA_2: break;
- default: return;
- }
-
if (speed >= XFER_UDMA_0) {
+ u_speed = (speed - XFER_UDMA_0) << (drive->dn * 4);
+
if (!(reg48 & u_flag))
pci_write_config_word(dev, 0x48, reg48|u_flag);
/* FIXME: (reg4a & a_speed) ? */
@@ -130,22 +114,23 @@ static void slc90e66_set_dma_mode(ide_drive_t *drive, const u8 speed)
}
}
-static void __devinit init_hwif_slc90e66 (ide_hwif_t *hwif)
+static u8 __devinit slc90e66_cable_detect(ide_hwif_t *hwif)
{
- u8 reg47 = 0;
- u8 mask = hwif->channel ? 0x01 : 0x02; /* bit0:Primary */
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+ u8 reg47 = 0, mask = hwif->channel ? 0x01 : 0x02;
- hwif->set_pio_mode = &slc90e66_set_pio_mode;
- hwif->set_dma_mode = &slc90e66_set_dma_mode;
+ pci_read_config_byte(dev, 0x47, &reg47);
- pci_read_config_byte(hwif->pci_dev, 0x47, &reg47);
+ /* bit[0(1)]: 0:80, 1:40 */
+ return (reg47 & mask) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
+}
- if (hwif->dma_base == 0)
- return;
+static void __devinit init_hwif_slc90e66(ide_hwif_t *hwif)
+{
+ hwif->set_pio_mode = &slc90e66_set_pio_mode;
+ hwif->set_dma_mode = &slc90e66_set_dma_mode;
- if (hwif->cbl != ATA_CBL_PATA40_SHORT)
- /* bit[0(1)]: 0:80, 1:40 */
- hwif->cbl = (reg47 & mask) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
+ hwif->cable_detect = slc90e66_cable_detect;
}
static const struct ide_port_info slc90e66_chipset __devinitdata = {
diff --git a/drivers/ide/pci/tc86c001.c b/drivers/ide/pci/tc86c001.c
index a66ebd14664..2ef2ed2f2b3 100644
--- a/drivers/ide/pci/tc86c001.c
+++ b/drivers/ide/pci/tc86c001.c
@@ -1,6 +1,4 @@
/*
- * drivers/ide/pci/tc86c001.c Version 1.01 Sep 5, 2007
- *
* Copyright (C) 2002 Toshiba Corporation
* Copyright (C) 2005-2006 MontaVista Software, Inc. <source@mvista.com>
*
@@ -162,9 +160,23 @@ static int tc86c001_busproc(ide_drive_t *drive, int state)
return 0;
}
+static u8 __devinit tc86c001_cable_detect(ide_hwif_t *hwif)
+{
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+ unsigned long sc_base = pci_resource_start(dev, 5);
+ u16 scr1 = inw(sc_base + 0x00);
+
+ /*
+ * System Control 1 Register bit 13 (PDIAGN):
+ * 0=80-pin cable, 1=40-pin cable
+ */
+ return (scr1 & 0x2000) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
+}
+
static void __devinit init_hwif_tc86c001(ide_hwif_t *hwif)
{
- unsigned long sc_base = pci_resource_start(hwif->pci_dev, 5);
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+ unsigned long sc_base = pci_resource_start(dev, 5);
u16 scr1 = inw(sc_base + 0x00);
/* System Control 1 Register bit 15 (Soft Reset) set */
@@ -184,6 +196,8 @@ static void __devinit init_hwif_tc86c001(ide_hwif_t *hwif)
hwif->busproc = &tc86c001_busproc;
+ hwif->cable_detect = tc86c001_cable_detect;
+
if (!hwif->dma_base)
return;
@@ -197,15 +211,6 @@ static void __devinit init_hwif_tc86c001(ide_hwif_t *hwif)
hwif->rqsize = 0xffff;
hwif->dma_start = &tc86c001_dma_start;
-
- if (hwif->cbl != ATA_CBL_PATA40_SHORT) {
- /*
- * System Control 1 Register bit 13 (PDIAGN):
- * 0=80-pin cable, 1=40-pin cable
- */
- scr1 = inw(sc_base + 0x00);
- hwif->cbl = (scr1 & 0x2000) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
- }
}
static unsigned int __devinit init_chipset_tc86c001(struct pci_dev *dev,
@@ -222,7 +227,8 @@ static const struct ide_port_info tc86c001_chipset __devinitdata = {
.name = "TC86C001",
.init_chipset = init_chipset_tc86c001,
.init_hwif = init_hwif_tc86c001,
- .host_flags = IDE_HFLAG_SINGLE | IDE_HFLAG_OFF_BOARD,
+ .host_flags = IDE_HFLAG_SINGLE | IDE_HFLAG_OFF_BOARD |
+ IDE_HFLAG_ABUSE_SET_DMA_MODE,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = ATA_UDMA4,
diff --git a/drivers/ide/pci/triflex.c b/drivers/ide/pci/triflex.c
index a227c41d23a..a67d02a3f96 100644
--- a/drivers/ide/pci/triflex.c
+++ b/drivers/ide/pci/triflex.c
@@ -1,6 +1,4 @@
/*
- * triflex.c
- *
* IDE Chipset driver for the Compaq TriFlex IDE controller.
*
* Known to work with the Compaq Workstation 5x00 series.
@@ -30,11 +28,6 @@
#include <linux/types.h>
#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/ioport.h>
-#include <linux/blkdev.h>
#include <linux/hdreg.h>
#include <linux/pci.h>
#include <linux/ide.h>
@@ -43,7 +36,7 @@
static void triflex_set_mode(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 channel_offset = hwif->channel ? 0x74 : 0x70;
u16 timing = 0;
u32 triflex_timings = 0;
@@ -81,8 +74,6 @@ static void triflex_set_mode(ide_drive_t *drive, const u8 speed)
case XFER_PIO_0:
timing = 0x0808;
break;
- default:
- return;
}
triflex_timings &= ~(0xFFFF << (16 * unit));
diff --git a/drivers/ide/pci/trm290.c b/drivers/ide/pci/trm290.c
index 0895e753a35..de750f7a43e 100644
--- a/drivers/ide/pci/trm290.c
+++ b/drivers/ide/pci/trm290.c
@@ -1,7 +1,7 @@
/*
- * linux/drivers/ide/pci/trm290.c Version 1.02 Mar. 18, 2000
- *
* Copyright (c) 1997-1998 Mark Lord
+ * Copyright (c) 2007 MontaVista Software, Inc. <source@mvista.com>
+ *
* May be copied or modified under the terms of the GNU General Public License
*
* June 22, 2004 - get rid of check_region
@@ -131,14 +131,12 @@
#include <linux/types.h>
#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/mm.h>
#include <linux/ioport.h>
#include <linux/interrupt.h>
#include <linux/blkdev.h>
#include <linux/init.h>
#include <linux/hdreg.h>
#include <linux/pci.h>
-#include <linux/delay.h>
#include <linux/ide.h>
#include <asm/io.h>
@@ -177,15 +175,12 @@ static void trm290_selectproc (ide_drive_t *drive)
trm290_prepare_drive(drive, drive->using_dma);
}
-static void trm290_ide_dma_exec_cmd(ide_drive_t *drive, u8 command)
+static void trm290_dma_exec_cmd(ide_drive_t *drive, u8 command)
{
- BUG_ON(HWGROUP(drive)->handler != NULL); /* paranoia check */
- ide_set_handler(drive, &ide_dma_intr, WAIT_CMD, NULL);
- /* issue cmd to drive */
- outb(command, IDE_COMMAND_REG);
+ ide_execute_command(drive, command, &ide_dma_intr, WAIT_CMD, NULL);
}
-static int trm290_ide_dma_setup(ide_drive_t *drive)
+static int trm290_dma_setup(ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
struct request *rq = hwif->hwgroup->rq;
@@ -208,56 +203,74 @@ static int trm290_ide_dma_setup(ide_drive_t *drive)
}
/* select DMA xfer */
trm290_prepare_drive(drive, 1);
- outl(hwif->dmatable_dma | rw, hwif->dma_command);
+ outl(hwif->dmatable_dma | rw, hwif->dma_base);
drive->waiting_for_dma = 1;
/* start DMA */
- outw((count * 2) - 1, hwif->dma_status);
+ outw(count * 2 - 1, hwif->dma_base + 2);
return 0;
}
-static void trm290_ide_dma_start(ide_drive_t *drive)
+static void trm290_dma_start(ide_drive_t *drive)
{
}
static int trm290_ide_dma_end (ide_drive_t *drive)
{
- ide_hwif_t *hwif = HWIF(drive);
- u16 status = 0;
+ u16 status;
drive->waiting_for_dma = 0;
/* purge DMA mappings */
ide_destroy_dmatable(drive);
- status = inw(hwif->dma_status);
- return (status != 0x00ff);
+ status = inw(HWIF(drive)->dma_base + 2);
+ return status != 0x00ff;
}
static int trm290_ide_dma_test_irq (ide_drive_t *drive)
{
- ide_hwif_t *hwif = HWIF(drive);
- u16 status = 0;
+ u16 status;
- status = inw(hwif->dma_status);
- return (status == 0x00ff);
+ status = inw(HWIF(drive)->dma_base + 2);
+ return status == 0x00ff;
+}
+
+static void trm290_dma_host_set(ide_drive_t *drive, int on)
+{
}
static void __devinit init_hwif_trm290(ide_hwif_t *hwif)
{
- unsigned int cfgbase = 0;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+ unsigned int cfg_base = pci_resource_start(dev, 4);
unsigned long flags;
u8 reg = 0;
- struct pci_dev *dev = hwif->pci_dev;
-
- cfgbase = pci_resource_start(dev, 4);
- if ((dev->class & 5) && cfgbase) {
- hwif->config_data = cfgbase;
- printk(KERN_INFO "TRM290: chip config base at 0x%04lx\n",
- hwif->config_data);
- } else {
- hwif->config_data = 0x3df0;
- printk(KERN_INFO "TRM290: using default config base at 0x%04lx\n",
- hwif->config_data);
+
+ if ((dev->class & 5) && cfg_base)
+ printk(KERN_INFO "TRM290: chip");
+ else {
+ cfg_base = 0x3df0;
+ printk(KERN_INFO "TRM290: using default");
+ }
+ printk(KERN_CONT " config base at 0x%04x\n", cfg_base);
+ hwif->config_data = cfg_base;
+ hwif->dma_base = (cfg_base + 4) ^ (hwif->channel ? 0x80 : 0);
+
+ printk(KERN_INFO " %s: BM-DMA at 0x%04lx-0x%04lx",
+ hwif->name, hwif->dma_base, hwif->dma_base + 3);
+
+ if (!request_region(hwif->dma_base, 4, hwif->name)) {
+ printk(KERN_CONT " -- Error, ports in use.\n");
+ return;
}
+ hwif->dmatable_cpu = pci_alloc_consistent(dev, PRD_ENTRIES * PRD_BYTES,
+ &hwif->dmatable_dma);
+ if (!hwif->dmatable_cpu) {
+ printk(KERN_CONT " -- Error, unable to allocate DMA table.\n");
+ release_region(hwif->dma_base, 4);
+ return;
+ }
+ printk(KERN_CONT "\n");
+
local_irq_save(flags);
/* put config reg into first byte of hwif->select_data */
outb(0x51 | (hwif->channel << 3), hwif->config_data + 1);
@@ -271,20 +284,19 @@ static void __devinit init_hwif_trm290(ide_hwif_t *hwif)
outb(reg, hwif->config_data + 3);
local_irq_restore(flags);
- if ((reg & 0x10))
+ if (reg & 0x10)
/* legacy mode */
hwif->irq = hwif->channel ? 15 : 14;
else if (!hwif->irq && hwif->mate && hwif->mate->irq)
/* sharing IRQ with mate */
hwif->irq = hwif->mate->irq;
- ide_setup_dma(hwif, (hwif->config_data + 4) ^ (hwif->channel ? 0x0080 : 0x0000), 3);
-
- hwif->dma_setup = &trm290_ide_dma_setup;
- hwif->dma_exec_cmd = &trm290_ide_dma_exec_cmd;
- hwif->dma_start = &trm290_ide_dma_start;
- hwif->ide_dma_end = &trm290_ide_dma_end;
- hwif->ide_dma_test_irq = &trm290_ide_dma_test_irq;
+ hwif->dma_host_set = &trm290_dma_host_set;
+ hwif->dma_setup = &trm290_dma_setup;
+ hwif->dma_exec_cmd = &trm290_dma_exec_cmd;
+ hwif->dma_start = &trm290_dma_start;
+ hwif->ide_dma_end = &trm290_ide_dma_end;
+ hwif->ide_dma_test_irq = &trm290_ide_dma_test_irq;
hwif->selectproc = &trm290_selectproc;
#if 1
diff --git a/drivers/ide/pci/via82cxxx.c b/drivers/ide/pci/via82cxxx.c
index a0d3c16b68e..f3f79f80581 100644
--- a/drivers/ide/pci/via82cxxx.c
+++ b/drivers/ide/pci/via82cxxx.c
@@ -1,7 +1,4 @@
/*
- *
- * Version 3.50
- *
* VIA IDE driver for Linux. Supported southbridges:
*
* vt82c576, vt82c586, vt82c586a, vt82c586b, vt82c596a, vt82c596b,
@@ -29,15 +26,11 @@
#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <linux/blkdev.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/ide.h>
#include <linux/dmi.h>
-#include <asm/io.h>
-
#ifdef CONFIG_PPC_CHRP
#include <asm/processor.h>
#endif
@@ -121,8 +114,8 @@ struct via82cxxx_dev
static void via_set_speed(ide_hwif_t *hwif, u8 dn, struct ide_timing *timing)
{
- struct pci_dev *dev = hwif->pci_dev;
- struct via82cxxx_dev *vdev = pci_get_drvdata(hwif->pci_dev);
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+ struct via82cxxx_dev *vdev = pci_get_drvdata(dev);
u8 t;
if (~vdev->via_config->flags & VIA_BAD_AST) {
@@ -159,8 +152,10 @@ static void via_set_speed(ide_hwif_t *hwif, u8 dn, struct ide_timing *timing)
static void via_set_drive(ide_drive_t *drive, const u8 speed)
{
- ide_drive_t *peer = HWIF(drive)->drives + (~drive->dn & 1);
- struct via82cxxx_dev *vdev = pci_get_drvdata(drive->hwif->pci_dev);
+ ide_hwif_t *hwif = drive->hwif;
+ ide_drive_t *peer = hwif->drives + (~drive->dn & 1);
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+ struct via82cxxx_dev *vdev = pci_get_drvdata(dev);
struct ide_timing t, p;
unsigned int T, UT;
@@ -408,7 +403,7 @@ static int via_cable_override(struct pci_dev *pdev)
static u8 __devinit via82cxxx_cable_detect(ide_hwif_t *hwif)
{
- struct pci_dev *pdev = hwif->pci_dev;
+ struct pci_dev *pdev = to_pci_dev(hwif->dev);
struct via82cxxx_dev *vdev = pci_get_drvdata(pdev);
if (via_cable_override(pdev))
@@ -425,11 +420,7 @@ static void __devinit init_hwif_via82cxxx(ide_hwif_t *hwif)
hwif->set_pio_mode = &via_set_pio_mode;
hwif->set_dma_mode = &via_set_drive;
- if (!hwif->dma_base)
- return;
-
- if (hwif->cbl != ATA_CBL_PATA40_SHORT)
- hwif->cbl = via82cxxx_cable_detect(hwif);
+ hwif->cable_detect = via82cxxx_cable_detect;
}
static const struct ide_port_info via82cxxx_chipset __devinitdata = {
@@ -439,6 +430,7 @@ static const struct ide_port_info via82cxxx_chipset __devinitdata = {
.enablebits = { { 0x40, 0x02, 0x02 }, { 0x40, 0x01, 0x01 } },
.host_flags = IDE_HFLAG_PIO_NO_BLACKLIST |
IDE_HFLAG_PIO_NO_DOWNGRADE |
+ IDE_HFLAG_ABUSE_SET_DMA_MODE |
IDE_HFLAG_POST_SET_MODE |
IDE_HFLAG_IO_32BIT |
IDE_HFLAG_BOOTABLE,