diff options
Diffstat (limited to 'drivers/ide/ppc')
| -rw-r--r-- | drivers/ide/ppc/mpc8xx.c | 2 | ||||
| -rw-r--r-- | drivers/ide/ppc/pmac.c | 84 |
2 files changed, 36 insertions, 50 deletions
diff --git a/drivers/ide/ppc/mpc8xx.c b/drivers/ide/ppc/mpc8xx.c index 45c1d55e60d..06190b1c4ec 100644 --- a/drivers/ide/ppc/mpc8xx.c +++ b/drivers/ide/ppc/mpc8xx.c @@ -848,7 +848,7 @@ static int __init mpc8xx_ide_probe(void) #endif #endif - ide_device_add(idx); + ide_device_add(idx, NULL); return 0; } diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c index 23112ef68f6..12ac3bfb4f9 100644 --- a/drivers/ide/ppc/pmac.c +++ b/drivers/ide/ppc/pmac.c @@ -412,7 +412,7 @@ kauai_lookup_timing(struct kauai_timing* table, int cycle_time) */ #define IDE_WAKEUP_DELAY (1*HZ) -static void pmac_ide_setup_dma(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif); +static int pmac_ide_setup_dma(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif); static int pmac_ide_build_dmatable(ide_drive_t *drive, struct request *rq); static void pmac_ide_selectproc(ide_drive_t *drive); static void pmac_ide_kauai_selectproc(ide_drive_t *drive); @@ -1003,6 +1003,17 @@ pmac_ide_do_resume(ide_hwif_t *hwif) return 0; } +static const struct ide_port_info pmac_port_info = { + .chipset = ide_pmac, + .host_flags = IDE_HFLAG_SET_PIO_MODE_KEEP_DMA | + IDE_HFLAG_PIO_NO_DOWNGRADE | + IDE_HFLAG_POST_SET_MODE | + IDE_HFLAG_NO_DMA | /* no SFF-style DMA */ + IDE_HFLAG_UNMASK_IRQS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, +}; + /* * Setup, register & probe an IDE channel driven by this driver, this is * called by one of the 2 probe functions (macio or PCI). Note that a channel @@ -1016,23 +1027,28 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif, hw_regs_t *hw) struct device_node *np = pmif->node; const int *bidp; u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; + struct ide_port_info d = pmac_port_info; pmif->cable_80 = 0; pmif->broken_dma = pmif->broken_dma_warn = 0; - if (of_device_is_compatible(np, "shasta-ata")) + if (of_device_is_compatible(np, "shasta-ata")) { pmif->kind = controller_sh_ata6; - else if (of_device_is_compatible(np, "kauai-ata")) + d.udma_mask = ATA_UDMA6; + } else if (of_device_is_compatible(np, "kauai-ata")) { pmif->kind = controller_un_ata6; - else if (of_device_is_compatible(np, "K2-UATA")) + d.udma_mask = ATA_UDMA5; + } else if (of_device_is_compatible(np, "K2-UATA")) { pmif->kind = controller_k2_ata6; - else if (of_device_is_compatible(np, "keylargo-ata")) { - if (strcmp(np->name, "ata-4") == 0) + d.udma_mask = ATA_UDMA5; + } else if (of_device_is_compatible(np, "keylargo-ata")) { + if (strcmp(np->name, "ata-4") == 0) { pmif->kind = controller_kl_ata4; - else + d.udma_mask = ATA_UDMA4; + } else pmif->kind = controller_kl_ata3; - } else if (of_device_is_compatible(np, "heathrow-ata")) + } else if (of_device_is_compatible(np, "heathrow-ata")) { pmif->kind = controller_heathrow; - else { + } else { pmif->kind = controller_ohare; pmif->broken_dma = 1; } @@ -1101,19 +1117,10 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif, hw_regs_t *hw) /* Tell common code _not_ to mess with resources */ hwif->mmio = 1; hwif->hwif_data = pmif; - hw->chipset = ide_pmac; ide_init_port_hw(hwif, hw); hwif->noprobe = pmif->mediabay; hwif->hold = pmif->mediabay; hwif->cbl = pmif->cable_80 ? ATA_CBL_PATA80 : ATA_CBL_PATA40; - hwif->drives[0].unmask = 1; - hwif->drives[1].unmask = 1; - hwif->drives[0].autotune = IDE_TUNE_AUTO; - hwif->drives[1].autotune = IDE_TUNE_AUTO; - hwif->host_flags = IDE_HFLAG_SET_PIO_MODE_KEEP_DMA | - IDE_HFLAG_PIO_NO_DOWNGRADE | - IDE_HFLAG_POST_SET_MODE; - hwif->pio_mask = ATA_PIO4; hwif->set_pio_mode = pmac_ide_set_pio_mode; if (pmif->kind == controller_un_ata6 || pmif->kind == controller_k2_ata6 @@ -1133,14 +1140,16 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif, hw_regs_t *hw) #endif /* CONFIG_PMAC_MEDIABAY */ #ifdef CONFIG_BLK_DEV_IDEDMA_PMAC + if (pmif->cable_80 == 0) + d.udma_mask &= ATA_UDMA2; /* has a DBDMA controller channel */ - if (pmif->dma_regs) - pmac_ide_setup_dma(pmif, hwif); -#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */ + if (pmif->dma_regs == 0 || pmac_ide_setup_dma(pmif, hwif) < 0) +#endif + d.udma_mask = d.mwdma_mask = 0; idx[0] = hwif->index; - ide_device_add(idx); + ide_device_add(idx, &d); return 0; } @@ -1721,8 +1730,7 @@ pmac_ide_dma_lost_irq (ide_drive_t *drive) * Allocate the data structures needed for using DMA with an interface * and fill the proper list of functions pointers */ -static void __devinit -pmac_ide_setup_dma(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif) +static int __devinit pmac_ide_setup_dma(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif) { struct pci_dev *dev = to_pci_dev(hwif->dev); @@ -1730,7 +1738,7 @@ pmac_ide_setup_dma(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif) * DMA routines ... */ if (dev == NULL) - return; + return -ENODEV; /* * Allocate space for the DBDMA commands. * The +2 is +1 for the stop command and +1 to allow for @@ -1743,7 +1751,7 @@ pmac_ide_setup_dma(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif) if (pmif->dma_table_cpu == NULL) { printk(KERN_ERR "%s: unable to allocate DMA command list\n", hwif->name); - return; + return -ENOMEM; } hwif->sg_max_nents = MAX_DCMDS; @@ -1757,29 +1765,7 @@ pmac_ide_setup_dma(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif) hwif->dma_timeout = &ide_dma_timeout; hwif->dma_lost_irq = &pmac_ide_dma_lost_irq; - switch(pmif->kind) { - case controller_sh_ata6: - hwif->ultra_mask = pmif->cable_80 ? 0x7f : 0x07; - hwif->mwdma_mask = 0x07; - hwif->swdma_mask = 0x00; - break; - case controller_un_ata6: - case controller_k2_ata6: - hwif->ultra_mask = pmif->cable_80 ? 0x3f : 0x07; - hwif->mwdma_mask = 0x07; - hwif->swdma_mask = 0x00; - break; - case controller_kl_ata4: - hwif->ultra_mask = pmif->cable_80 ? 0x1f : 0x07; - hwif->mwdma_mask = 0x07; - hwif->swdma_mask = 0x00; - break; - default: - hwif->ultra_mask = 0x00; - hwif->mwdma_mask = 0x07; - hwif->swdma_mask = 0x00; - break; - } + return 0; } #endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */ |