diff options
Diffstat (limited to 'drivers/ide/setup-pci.c')
| -rw-r--r-- | drivers/ide/setup-pci.c | 130 |
1 files changed, 66 insertions, 64 deletions
diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c index 5171601fb25..b15cad58dc8 100644 --- a/drivers/ide/setup-pci.c +++ b/drivers/ide/setup-pci.c @@ -6,19 +6,15 @@ * May be copied or modified under the terms of the GNU General Public License */ -#include <linux/module.h> #include <linux/types.h> #include <linux/kernel.h> #include <linux/pci.h> #include <linux/init.h> -#include <linux/timer.h> -#include <linux/mm.h> #include <linux/interrupt.h> #include <linux/ide.h> #include <linux/dma-mapping.h> #include <asm/io.h> -#include <asm/irq.h> /** * ide_setup_pci_baseregs - place a PCI IDE controller native @@ -77,17 +73,14 @@ static void ide_pci_clear_simplex(unsigned long dma_base, const char *name) * @d: IDE port info * * Fetch the DMA Bus-Master-I/O-Base-Address (BMIBA) from PCI space. - * Where a device has a partner that is already in DMA mode we check - * and enforce IDE simplex rules. */ unsigned long ide_pci_dma_base(ide_hwif_t *hwif, const struct ide_port_info *d) { struct pci_dev *dev = to_pci_dev(hwif->dev); unsigned long dma_base = 0; - u8 dma_stat = 0; - if (hwif->mmio) + if (hwif->host_flags & IDE_HFLAG_MMIO) return hwif->dma_base; if (hwif->mate && hwif->mate->dma_base) { @@ -106,11 +99,19 @@ unsigned long ide_pci_dma_base(ide_hwif_t *hwif, const struct ide_port_info *d) if (hwif->channel) dma_base += 8; - if (d->host_flags & IDE_HFLAG_CS5520) + return dma_base; +} +EXPORT_SYMBOL_GPL(ide_pci_dma_base); + +int ide_pci_check_simplex(ide_hwif_t *hwif, const struct ide_port_info *d) +{ + u8 dma_stat; + + if (d->host_flags & (IDE_HFLAG_MMIO | IDE_HFLAG_CS5520)) goto out; if (d->host_flags & IDE_HFLAG_CLEAR_SIMPLEX) { - ide_pci_clear_simplex(dma_base, d->name); + ide_pci_clear_simplex(hwif->dma_base, d->name); goto out; } @@ -124,15 +125,15 @@ unsigned long ide_pci_dma_base(ide_hwif_t *hwif, const struct ide_port_info *d) * we tune the drive then try to grab DMA ownership if we want to be * the DMA end. This has to be become dynamic to handle hot-plug. */ - dma_stat = hwif->INB(dma_base + 2); + dma_stat = hwif->tp_ops->read_sff_dma_status(hwif); if ((dma_stat & 0x80) && hwif->mate && hwif->mate->dma_base) { printk(KERN_INFO "%s: simplex device: DMA disabled\n", d->name); - dma_base = 0; + return -1; } out: - return dma_base; + return 0; } -EXPORT_SYMBOL_GPL(ide_pci_dma_base); +EXPORT_SYMBOL_GPL(ide_pci_check_simplex); /* * Set up BM-DMA capability (PnP BIOS should have done this) @@ -288,67 +289,54 @@ static int ide_pci_check_iomem(struct pci_dev *dev, const struct ide_port_info * } /** - * ide_hwif_configure - configure an IDE interface + * ide_hw_configure - configure a hw_regs_t instance * @dev: PCI device holding interface * @d: IDE port info * @port: port number * @irq: PCI IRQ + * @hw: hw_regs_t instance corresponding to this port * * Perform the initial set up for the hardware interface structure. This * is done per interface port rather than per PCI device. There may be * more than one port per device. * - * Returns the new hardware interface structure, or NULL on a failure + * Returns zero on success or an error code. */ -static ide_hwif_t *ide_hwif_configure(struct pci_dev *dev, - const struct ide_port_info *d, - unsigned int port, int irq) +static int ide_hw_configure(struct pci_dev *dev, const struct ide_port_info *d, + unsigned int port, int irq, hw_regs_t *hw) { unsigned long ctl = 0, base = 0; - ide_hwif_t *hwif; - struct hw_regs_s hw; if ((d->host_flags & IDE_HFLAG_ISA_PORTS) == 0) { if (ide_pci_check_iomem(dev, d, 2 * port) || ide_pci_check_iomem(dev, d, 2 * port + 1)) { printk(KERN_ERR "%s: I/O baseregs (BIOS) are reported " "as MEM for port %d!\n", d->name, port); - return NULL; + return -EINVAL; } ctl = pci_resource_start(dev, 2*port+1); base = pci_resource_start(dev, 2*port); - if ((ctl && !base) || (base && !ctl)) { - printk(KERN_ERR "%s: inconsistent baseregs (BIOS) " - "for port %d, skipping\n", d->name, port); - return NULL; - } - } - if (!ctl) { + } else { /* Use default values */ ctl = port ? 0x374 : 0x3f4; base = port ? 0x170 : 0x1f0; } - hwif = ide_find_port_slot(d); - if (hwif == NULL) { - printk(KERN_ERR "%s: too many IDE interfaces, no room in " - "table\n", d->name); - return NULL; + if (!base || !ctl) { + printk(KERN_ERR "%s: bad PCI BARs for port %d, skipping\n", + d->name, port); + return -EINVAL; } - memset(&hw, 0, sizeof(hw)); - hw.irq = irq; - hw.dev = &dev->dev; - hw.chipset = d->chipset ? d->chipset : ide_pci; - ide_std_init_ports(&hw, base, ctl | 2); + memset(hw, 0, sizeof(*hw)); + hw->irq = irq; + hw->dev = &dev->dev; + hw->chipset = d->chipset ? d->chipset : ide_pci; + ide_std_init_ports(hw, base, ctl | 2); - ide_init_port_hw(hwif, &hw); - - hwif->dev = &dev->dev; - - return hwif; + return 0; } #ifdef CONFIG_BLK_DEV_IDEDMA_PCI @@ -371,10 +359,18 @@ int ide_hwif_setup_dma(ide_hwif_t *hwif, const struct ide_port_info *d) (dev->class & 0x80))) { unsigned long base = ide_pci_dma_base(hwif, d); - if (base == 0 || ide_pci_set_master(dev, d->name) < 0) + if (base == 0) return -1; - if (hwif->mmio) + hwif->dma_base = base; + + if (ide_pci_check_simplex(hwif, d) < 0) + return -1; + + if (ide_pci_set_master(dev, d->name) < 0) + return -1; + + if (hwif->host_flags & IDE_HFLAG_MMIO) printk(KERN_INFO " %s: MMIO-DMA\n", hwif->name); else printk(KERN_INFO " %s: BM-DMA at 0x%04lx-0x%04lx\n", @@ -385,7 +381,7 @@ int ide_hwif_setup_dma(ide_hwif_t *hwif, const struct ide_port_info *d) if (ide_allocate_dma_engine(hwif)) return -1; - ide_setup_dma(hwif, base); + hwif->dma_ops = &sff_dma_ops; } return 0; @@ -438,7 +434,8 @@ out: * @dev: PCI device * @d: IDE port info * @pciirq: IRQ line - * @idx: ATA index table to update + * @hw: hw_regs_t instances corresponding to this PCI IDE device + * @hws: hw_regs_t pointers table to update * * Scan the interfaces attached to this device and do any * necessary per port setup. Attach the devices and ask the @@ -449,10 +446,10 @@ out: * where the chipset setup is not the default PCI IDE one. */ -void ide_pci_setup_ports(struct pci_dev *dev, const struct ide_port_info *d, int pciirq, u8 *idx) +void ide_pci_setup_ports(struct pci_dev *dev, const struct ide_port_info *d, + int pciirq, hw_regs_t *hw, hw_regs_t **hws) { int channels = (d->host_flags & IDE_HFLAG_SINGLE) ? 1 : 2, port; - ide_hwif_t *hwif; u8 tmp; /* @@ -468,11 +465,10 @@ void ide_pci_setup_ports(struct pci_dev *dev, const struct ide_port_info *d, int continue; /* port not enabled */ } - hwif = ide_hwif_configure(dev, d, port, pciirq); - if (hwif == NULL) + if (ide_hw_configure(dev, d, port, pciirq, hw + port)) continue; - *(idx + port) = hwif->index; + *(hws + port) = hw + port; } } EXPORT_SYMBOL_GPL(ide_pci_setup_ports); @@ -489,7 +485,7 @@ EXPORT_SYMBOL_GPL(ide_pci_setup_ports); */ static int do_ide_setup_pci_device(struct pci_dev *dev, const struct ide_port_info *d, - u8 *idx, u8 noisy) + u8 noisy) { int tried_config = 0; int pciirq, ret; @@ -538,22 +534,24 @@ static int do_ide_setup_pci_device(struct pci_dev *dev, d->name, pciirq); } - /* FIXME: silent failure can happen */ - - ide_pci_setup_ports(dev, d, pciirq, idx); + ret = pciirq; out: return ret; } int ide_setup_pci_device(struct pci_dev *dev, const struct ide_port_info *d) { - u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; + hw_regs_t hw[4], *hws[] = { NULL, NULL, NULL, NULL }; int ret; - ret = do_ide_setup_pci_device(dev, d, &idx[0], 1); + ret = do_ide_setup_pci_device(dev, d, 1); + + if (ret >= 0) { + /* FIXME: silent failure can happen */ + ide_pci_setup_ports(dev, d, ret, &hw[0], &hws[0]); - if (ret >= 0) - ide_device_add(idx, d); + ret = ide_host_add(d, hws, NULL); + } return ret; } @@ -564,19 +562,23 @@ int ide_setup_pci_devices(struct pci_dev *dev1, struct pci_dev *dev2, { struct pci_dev *pdev[] = { dev1, dev2 }; int ret, i; - u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; + hw_regs_t hw[4], *hws[] = { NULL, NULL, NULL, NULL }; for (i = 0; i < 2; i++) { - ret = do_ide_setup_pci_device(pdev[i], d, &idx[i*2], !i); + ret = do_ide_setup_pci_device(pdev[i], d, !i); + /* * FIXME: Mom, mom, they stole me the helper function to undo * do_ide_setup_pci_device() on the first device! */ if (ret < 0) goto out; + + /* FIXME: silent failure can happen */ + ide_pci_setup_ports(pdev[i], d, ret, &hw[i*2], &hws[i*2]); } - ide_device_add(idx, d); + ret = ide_host_add(d, hws, NULL); out: return ret; } |