summaryrefslogtreecommitdiffstats
path: root/drivers/ide/sgiioc4.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ide/sgiioc4.c')
-rw-r--r--drivers/ide/sgiioc4.c119
1 files changed, 54 insertions, 65 deletions
diff --git a/drivers/ide/sgiioc4.c b/drivers/ide/sgiioc4.c
index 5f37f168f94..b7d61dc6409 100644
--- a/drivers/ide/sgiioc4.c
+++ b/drivers/ide/sgiioc4.c
@@ -1,6 +1,6 @@
/*
* Copyright (c) 2003-2006 Silicon Graphics, Inc. All Rights Reserved.
- * Copyright (C) 2008 MontaVista Software, Inc.
+ * Copyright (C) 2008-2009 MontaVista Software, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License
@@ -29,8 +29,7 @@
#include <linux/blkdev.h>
#include <linux/scatterlist.h>
#include <linux/ioc4.h>
-#include <asm/io.h>
-
+#include <linux/io.h>
#include <linux/ide.h>
#define DRV_NAME "SGIIOC4"
@@ -72,7 +71,7 @@
#define IOC4_CMD_CTL_BLK_SIZE 0x20
#define IOC4_SUPPORTED_FIRMWARE_REV 46
-typedef struct {
+struct ioc4_dma_regs {
u32 timing_reg0;
u32 timing_reg1;
u32 low_mem_ptr;
@@ -82,17 +81,18 @@ typedef struct {
u32 dev_byte_count;
u32 mem_byte_count;
u32 status;
-} ioc4_dma_regs_t;
+};
/* Each Physical Region Descriptor Entry size is 16 bytes (2 * 64 bits) */
/* IOC4 has only 1 IDE channel */
-#define IOC4_PRD_BYTES 16
-#define IOC4_PRD_ENTRIES (PAGE_SIZE /(4*IOC4_PRD_BYTES))
+#define IOC4_PRD_BYTES 16
+#define IOC4_PRD_ENTRIES (PAGE_SIZE / (4 * IOC4_PRD_BYTES))
-static void
-sgiioc4_init_hwif_ports(struct ide_hw *hw, unsigned long data_port,
- unsigned long ctrl_port, unsigned long irq_port)
+static void sgiioc4_init_hwif_ports(struct ide_hw *hw,
+ unsigned long data_port,
+ unsigned long ctrl_port,
+ unsigned long irq_port)
{
unsigned long reg = data_port;
int i;
@@ -105,13 +105,11 @@ sgiioc4_init_hwif_ports(struct ide_hw *hw, unsigned long data_port,
hw->io_ports.irq_addr = irq_port;
}
-static int
-sgiioc4_checkirq(ide_hwif_t * hwif)
+static int sgiioc4_checkirq(ide_hwif_t *hwif)
{
- unsigned long intr_addr =
- hwif->io_ports.irq_addr + IOC4_INTR_REG * 4;
+ unsigned long intr_addr = hwif->io_ports.irq_addr + IOC4_INTR_REG * 4;
- if ((u8)readl((void __iomem *)intr_addr) & 0x03)
+ if (readl((void __iomem *)intr_addr) & 0x03)
return 1;
return 0;
@@ -119,8 +117,7 @@ sgiioc4_checkirq(ide_hwif_t * hwif)
static u8 sgiioc4_read_status(ide_hwif_t *);
-static int
-sgiioc4_clearirq(ide_drive_t * drive)
+static int sgiioc4_clearirq(ide_drive_t *drive)
{
u32 intr_reg;
ide_hwif_t *hwif = drive->hwif;
@@ -158,12 +155,10 @@ sgiioc4_clearirq(ide_drive_t * drive)
readl((void __iomem *)(io_ports->irq_addr + 4));
pci_read_config_dword(dev, PCI_COMMAND,
&pci_stat_cmd_reg);
- printk(KERN_ERR
- "%s(%s) : PCI Bus Error when doing DMA:"
- " status-cmd reg is 0x%x\n",
+ printk(KERN_ERR "%s(%s): PCI Bus Error when doing DMA: "
+ "status-cmd reg is 0x%x\n",
__func__, drive->name, pci_stat_cmd_reg);
- printk(KERN_ERR
- "%s(%s) : PCI Error Address is 0x%x%x\n",
+ printk(KERN_ERR "%s(%s): PCI Error Address is 0x%x%x\n",
__func__, drive->name,
pci_err_addr_high, pci_err_addr_low);
/* Clear the PCI Error indicator */
@@ -189,8 +184,7 @@ static void sgiioc4_dma_start(ide_drive_t *drive)
writel(temp_reg, (void __iomem *)ioc4_dma_addr);
}
-static u32
-sgiioc4_ide_dma_stop(ide_hwif_t *hwif, u64 dma_base)
+static u32 sgiioc4_ide_dma_stop(ide_hwif_t *hwif, u64 dma_base)
{
unsigned long ioc4_dma_addr = dma_base + IOC4_DMA_CTRL * 4;
u32 ioc4_dma;
@@ -227,7 +221,7 @@ static int sgiioc4_dma_end(ide_drive_t *drive)
}
/*
- * The IOC4 will DMA 1's to the ending dma area to indicate that
+ * The IOC4 will DMA 1's to the ending DMA area to indicate that
* previous data DMA is complete. This is necessary because of relaxed
* ordering between register reads and DMA writes on the Altix.
*/
@@ -265,7 +259,7 @@ static void sgiioc4_set_dma_mode(ide_drive_t *drive, const u8 speed)
{
}
-/* returns 1 if dma irq issued, 0 otherwise */
+/* Returns 1 if DMA IRQ issued, 0 otherwise */
static int sgiioc4_dma_test_irq(ide_drive_t *drive)
{
return sgiioc4_checkirq(drive->hwif);
@@ -286,8 +280,7 @@ static void sgiioc4_resetproc(ide_drive_t *drive)
sgiioc4_clearirq(drive);
}
-static void
-sgiioc4_dma_lost_irq(ide_drive_t * drive)
+static void sgiioc4_dma_lost_irq(ide_drive_t *drive)
{
sgiioc4_resetproc(drive);
@@ -313,13 +306,13 @@ static u8 sgiioc4_read_status(ide_hwif_t *hwif)
return reg;
}
-/* Creates a dma map for the scatter-gather list entries */
-static int __devinit
-ide_dma_sgiioc4(ide_hwif_t *hwif, const struct ide_port_info *d)
+/* Creates a DMA map for the scatter-gather list entries */
+static int __devinit ide_dma_sgiioc4(ide_hwif_t *hwif,
+ const struct ide_port_info *d)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
unsigned long dma_base = pci_resource_start(dev, 0) + IOC4_DMA_OFFSET;
- int num_ports = sizeof (ioc4_dma_regs_t);
+ int num_ports = sizeof(struct ioc4_dma_regs);
void *pad;
printk(KERN_INFO " %s: MMIO-DMA\n", hwif->name);
@@ -362,8 +355,7 @@ dma_pci_alloc_failure:
}
/* Initializes the IOC4 DMA Engine */
-static void
-sgiioc4_configure_for_dma(int dma_direction, ide_drive_t * drive)
+static void sgiioc4_configure_for_dma(int dma_direction, ide_drive_t *drive)
{
u32 ioc4_dma;
ide_hwif_t *hwif = drive->hwif;
@@ -374,31 +366,27 @@ sgiioc4_configure_for_dma(int dma_direction, ide_drive_t * drive)
ioc4_dma = readl((void __iomem *)ioc4_dma_addr);
if (ioc4_dma & IOC4_S_DMA_ACTIVE) {
- printk(KERN_WARNING
- "%s(%s):Warning!! DMA from previous transfer was still active\n",
- __func__, drive->name);
+ printk(KERN_WARNING "%s(%s): Warning!! DMA from previous "
+ "transfer was still active\n", __func__, drive->name);
writel(IOC4_S_DMA_STOP, (void __iomem *)ioc4_dma_addr);
ioc4_dma = sgiioc4_ide_dma_stop(hwif, dma_base);
if (ioc4_dma & IOC4_S_DMA_STOP)
- printk(KERN_ERR
- "%s(%s) : IOC4 Dma STOP bit is still 1\n",
- __func__, drive->name);
+ printk(KERN_ERR "%s(%s): IOC4 DMA STOP bit is "
+ "still 1\n", __func__, drive->name);
}
ioc4_dma = readl((void __iomem *)ioc4_dma_addr);
if (ioc4_dma & IOC4_S_DMA_ERROR) {
- printk(KERN_WARNING
- "%s(%s) : Warning!! - DMA Error during Previous"
- " transfer | status 0x%x\n",
+ printk(KERN_WARNING "%s(%s): Warning!! DMA Error during "
+ "previous transfer, status 0x%x\n",
__func__, drive->name, ioc4_dma);
writel(IOC4_S_DMA_STOP, (void __iomem *)ioc4_dma_addr);
ioc4_dma = sgiioc4_ide_dma_stop(hwif, dma_base);
if (ioc4_dma & IOC4_S_DMA_STOP)
- printk(KERN_ERR
- "%s(%s) : IOC4 DMA STOP bit is still 1\n",
- __func__, drive->name);
+ printk(KERN_ERR "%s(%s): IOC4 DMA STOP bit is "
+ "still 1\n", __func__, drive->name);
}
/* Address of the Scatter Gather List */
@@ -408,20 +396,22 @@ sgiioc4_configure_for_dma(int dma_direction, ide_drive_t * drive)
/* Address of the Ending DMA */
memset(ide_get_hwifdata(hwif), 0, IOC4_IDE_CACHELINE_SIZE);
ending_dma_addr = cpu_to_le32(hwif->extra_base);
- writel(ending_dma_addr, (void __iomem *)(dma_base + IOC4_DMA_END_ADDR * 4));
+ writel(ending_dma_addr, (void __iomem *)(dma_base +
+ IOC4_DMA_END_ADDR * 4));
writel(dma_direction, (void __iomem *)ioc4_dma_addr);
}
-/* IOC4 Scatter Gather list Format */
+/* IOC4 Scatter Gather list Format */
/* 128 Bit entries to support 64 bit addresses in the future */
/* The Scatter Gather list Entry should be in the BIG-ENDIAN Format */
/* --------------------------------------------------------------------- */
-/* | Upper 32 bits - Zero | Lower 32 bits- address | */
+/* | Upper 32 bits - Zero | Lower 32 bits- address | */
/* --------------------------------------------------------------------- */
/* | Upper 32 bits - Zero |EOL| 15 unused | 16 Bit Length| */
/* --------------------------------------------------------------------- */
-/* Creates the scatter gather list, DMA Table */
+/* Creates the scatter gather list, DMA Table */
+
static int sgiioc4_build_dmatable(ide_drive_t *drive, struct ide_cmd *cmd)
{
ide_hwif_t *hwif = drive->hwif;
@@ -448,8 +438,10 @@ static int sgiioc4_build_dmatable(ide_drive_t *drive, struct ide_cmd *cmd)
if (bcount > cur_len)
bcount = cur_len;
- /* put the addr, length in
- * the IOC4 dma-table format */
+ /*
+ * Put the address, length in
+ * the IOC4 dma-table format
+ */
*table = 0x0;
table++;
*table = cpu_to_be32(cur_addr);
@@ -540,8 +532,7 @@ static const struct ide_port_info sgiioc4_port_info __devinitconst = {
.mwdma_mask = ATA_MWDMA2_ONLY,
};
-static int __devinit
-sgiioc4_ide_setup_pci_device(struct pci_dev *dev)
+static int __devinit sgiioc4_ide_setup_pci_device(struct pci_dev *dev)
{
unsigned long cmd_base, irqport;
unsigned long bar0, cmd_phys_base, ctl;
@@ -549,7 +540,7 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev)
struct ide_hw hw, *hws[] = { &hw };
int rc;
- /* Get the CmdBlk and CtrlBlk Base Registers */
+ /* Get the CmdBlk and CtrlBlk base registers */
bar0 = pci_resource_start(dev, 0);
virt_base = pci_ioremap_bar(dev, 0);
if (virt_base == NULL) {
@@ -557,9 +548,9 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev)
DRV_NAME, bar0);
return -ENOMEM;
}
- cmd_base = (unsigned long) virt_base + IOC4_CMD_OFFSET;
- ctl = (unsigned long) virt_base + IOC4_CTRL_OFFSET;
- irqport = (unsigned long) virt_base + IOC4_INTR_OFFSET;
+ cmd_base = (unsigned long)virt_base + IOC4_CMD_OFFSET;
+ ctl = (unsigned long)virt_base + IOC4_CTRL_OFFSET;
+ irqport = (unsigned long)virt_base + IOC4_INTR_OFFSET;
cmd_phys_base = bar0 + IOC4_CMD_OFFSET;
if (request_mem_region(cmd_phys_base, IOC4_CMD_CTL_BLK_SIZE,
@@ -577,7 +568,7 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev)
hw.irq = dev->irq;
hw.dev = &dev->dev;
- /* Initializing chipset IRQ Registers */
+ /* Initialize chipset IRQ registers */
writel(0x03, (void __iomem *)(irqport + IOC4_INTR_SET * 4));
rc = ide_host_add(&sgiioc4_port_info, hws, 1, NULL);
@@ -590,8 +581,7 @@ req_mem_rgn_err:
return rc;
}
-static unsigned int __devinit
-pci_init_sgiioc4(struct pci_dev *dev)
+static unsigned int __devinit pci_init_sgiioc4(struct pci_dev *dev)
{
int ret;
@@ -611,10 +601,10 @@ out:
return ret;
}
-int __devinit
-ioc4_ide_attach_one(struct ioc4_driver_data *idd)
+int __devinit ioc4_ide_attach_one(struct ioc4_driver_data *idd)
{
- /* PCI-RT does not bring out IDE connection.
+ /*
+ * PCI-RT does not bring out IDE connection.
* Do not attach to this particular IOC4.
*/
if (idd->idd_variant == IOC4_VARIANT_PCI_RT)
@@ -627,7 +617,6 @@ static struct ioc4_submodule __devinitdata ioc4_ide_submodule = {
.is_name = "IOC4_ide",
.is_owner = THIS_MODULE,
.is_probe = ioc4_ide_attach_one,
-/* .is_remove = ioc4_ide_remove_one, */
};
static int __init ioc4_ide_init(void)