diff options
Diffstat (limited to 'drivers/ide/sl82c105.c')
| -rw-r--r-- | drivers/ide/sl82c105.c | 41 |
1 files changed, 29 insertions, 12 deletions
diff --git a/drivers/ide/sl82c105.c b/drivers/ide/sl82c105.c index b0a46062533..d698da470d6 100644 --- a/drivers/ide/sl82c105.c +++ b/drivers/ide/sl82c105.c @@ -10,7 +10,7 @@ * with the timing registers setup. * -- Benjamin Herrenschmidt (01/11/03) benh@kernel.crashing.org * - * Copyright (C) 2006-2007 MontaVista Software, Inc. <source@mvista.com> + * Copyright (C) 2006-2007,2009 MontaVista Software, Inc. <source@mvista.com> * Copyright (C) 2007 Bartlomiej Zolnierkiewicz */ @@ -61,8 +61,7 @@ static unsigned int get_pio_timings(ide_drive_t *drive, u8 pio) if (cmd_off == 0) cmd_off = 1; - if ((pio > 2 || ata_id_has_iordy(drive->id)) && - !(pio > 4 && ata_id_is_cfa(drive->id))) + if (ide_pio_need_iordy(drive, pio)) iordy = 0x40; return (cmd_on - 1) << 8 | (cmd_off - 1) | iordy; @@ -74,6 +73,7 @@ static unsigned int get_pio_timings(ide_drive_t *drive, u8 pio) static void sl82c105_set_pio_mode(ide_drive_t *drive, const u8 pio) { struct pci_dev *dev = to_pci_dev(drive->hwif->dev); + unsigned long timings = (unsigned long)ide_get_drivedata(drive); int reg = 0x44 + drive->dn * 4; u16 drv_ctrl; @@ -83,8 +83,9 @@ static void sl82c105_set_pio_mode(ide_drive_t *drive, const u8 pio) * Store the PIO timings so that we can restore them * in case DMA will be turned off... */ - drive->drive_data &= 0xffff0000; - drive->drive_data |= drv_ctrl; + timings &= 0xffff0000; + timings |= drv_ctrl; + ide_set_drivedata(drive, (void *)timings); pci_write_config_word(dev, reg, drv_ctrl); pci_read_config_word (dev, reg, &drv_ctrl); @@ -100,6 +101,7 @@ static void sl82c105_set_pio_mode(ide_drive_t *drive, const u8 pio) static void sl82c105_set_dma_mode(ide_drive_t *drive, const u8 speed) { static u16 mwdma_timings[] = {0x0707, 0x0201, 0x0200}; + unsigned long timings = (unsigned long)ide_get_drivedata(drive); u16 drv_ctrl; DBG(("sl82c105_tune_chipset(drive:%s, speed:%s)\n", @@ -111,8 +113,19 @@ static void sl82c105_set_dma_mode(ide_drive_t *drive, const u8 speed) * Store the DMA timings so that we can actually program * them when DMA will be turned on... */ - drive->drive_data &= 0x0000ffff; - drive->drive_data |= (unsigned long)drv_ctrl << 16; + timings &= 0x0000ffff; + timings |= (unsigned long)drv_ctrl << 16; + ide_set_drivedata(drive, (void *)timings); +} + +static int sl82c105_test_irq(ide_hwif_t *hwif) +{ + struct pci_dev *dev = to_pci_dev(hwif->dev); + u32 val, mask = hwif->channel ? CTRL_IDE_IRQB : CTRL_IDE_IRQA; + + pci_read_config_dword(dev, 0x40, &val); + + return (val & mask) ? 1 : 0; } /* @@ -146,14 +159,15 @@ static void sl82c105_dma_lost_irq(ide_drive_t *drive) u32 val, mask = hwif->channel ? CTRL_IDE_IRQB : CTRL_IDE_IRQA; u8 dma_cmd; - printk("sl82c105: lost IRQ, resetting host\n"); + printk(KERN_WARNING "sl82c105: lost IRQ, resetting host\n"); /* * Check the raw interrupt from the drive. */ pci_read_config_dword(dev, 0x40, &val); if (val & mask) - printk("sl82c105: drive was requesting IRQ, but host lost it\n"); + printk(KERN_INFO "sl82c105: drive was requesting IRQ, " + "but host lost it\n"); /* * Was DMA enabled? If so, disable it - we're resetting the @@ -162,7 +176,7 @@ static void sl82c105_dma_lost_irq(ide_drive_t *drive) dma_cmd = inb(hwif->dma_base + ATA_DMA_CMD); if (dma_cmd & 1) { outb(dma_cmd & ~1, hwif->dma_base + ATA_DMA_CMD); - printk("sl82c105: DMA was enabled\n"); + printk(KERN_INFO "sl82c105: DMA was enabled\n"); } sl82c105_reset_host(dev); @@ -184,7 +198,8 @@ static void sl82c105_dma_start(ide_drive_t *drive) DBG(("%s(drive:%s)\n", __func__, drive->name)); - pci_write_config_word(dev, reg, drive->drive_data >> 16); + pci_write_config_word(dev, reg, + (unsigned long)ide_get_drivedata(drive) >> 16); sl82c105_reset_host(dev); ide_dma_start(drive); @@ -209,7 +224,8 @@ static int sl82c105_dma_end(ide_drive_t *drive) ret = ide_dma_end(drive); - pci_write_config_word(dev, reg, drive->drive_data); + pci_write_config_word(dev, reg, + (unsigned long)ide_get_drivedata(drive)); return ret; } @@ -288,6 +304,7 @@ static const struct ide_port_ops sl82c105_port_ops = { .set_pio_mode = sl82c105_set_pio_mode, .set_dma_mode = sl82c105_set_dma_mode, .resetproc = sl82c105_resetproc, + .test_irq = sl82c105_test_irq, }; static const struct ide_dma_ops sl82c105_dma_ops = { |