diff options
Diffstat (limited to 'drivers/ide')
| -rw-r--r-- | drivers/ide/ide-tape.c | 110 |
1 files changed, 46 insertions, 64 deletions
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index d2e9c09b521..4da7fa9bca1 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -987,42 +987,50 @@ static void ide_tape_flush_merge_buffer(ide_drive_t *drive) tape->chrdev_dir = IDETAPE_DIR_NONE; } -static int idetape_init_read(ide_drive_t *drive) +static int idetape_init_rw(ide_drive_t *drive, int dir) { idetape_tape_t *tape = drive->driver_data; - int bytes_read; + int rc; - /* Initialize read operation */ - if (tape->chrdev_dir != IDETAPE_DIR_READ) { - if (tape->chrdev_dir == IDETAPE_DIR_WRITE) { - ide_tape_flush_merge_buffer(drive); - idetape_flush_tape_buffers(drive); - } - if (tape->buf || tape->valid) { - printk(KERN_ERR "ide-tape: valid should be 0 now\n"); - tape->valid = 0; - } - tape->buf = kmalloc(tape->buffer_size, GFP_KERNEL); - if (!tape->buf) - return -ENOMEM; - tape->chrdev_dir = IDETAPE_DIR_READ; - tape->cur = tape->buf; + BUG_ON(dir != IDETAPE_DIR_READ && dir != IDETAPE_DIR_WRITE); - /* - * Issue a read 0 command to ensure that DSC handshake is - * switched from completion mode to buffer available mode. - * No point in issuing this if DSC overlap isn't supported, some - * drives (Seagate STT3401A) will return an error. - */ - if (drive->dev_flags & IDE_DFLAG_DSC_OVERLAP) { - bytes_read = idetape_queue_rw_tail(drive, - REQ_IDETAPE_READ, 0); - if (bytes_read < 0) { - kfree(tape->buf); - tape->buf = NULL; - tape->chrdev_dir = IDETAPE_DIR_NONE; - return bytes_read; - } + if (tape->chrdev_dir == dir) + return 0; + + if (tape->chrdev_dir == IDETAPE_DIR_READ) + ide_tape_discard_merge_buffer(drive, 1); + else if (tape->chrdev_dir == IDETAPE_DIR_WRITE) { + ide_tape_flush_merge_buffer(drive); + idetape_flush_tape_buffers(drive); + } + + if (tape->buf || tape->valid) { + printk(KERN_ERR "ide-tape: valid should be 0 now\n"); + tape->valid = 0; + } + + tape->buf = kmalloc(tape->buffer_size, GFP_KERNEL); + if (!tape->buf) + return -ENOMEM; + tape->chrdev_dir = dir; + tape->cur = tape->buf; + + /* + * Issue a 0 rw command to ensure that DSC handshake is + * switched from completion mode to buffer available mode. No + * point in issuing this if DSC overlap isn't supported, some + * drives (Seagate STT3401A) will return an error. + */ + if (drive->dev_flags & IDE_DFLAG_DSC_OVERLAP) { + int cmd = dir == IDETAPE_DIR_READ ? REQ_IDETAPE_READ + : REQ_IDETAPE_WRITE; + + rc = idetape_queue_rw_tail(drive, cmd, 0); + if (rc < 0) { + kfree(tape->buf); + tape->buf = NULL; + tape->chrdev_dir = IDETAPE_DIR_NONE; + return rc; } } @@ -1038,7 +1046,7 @@ static int idetape_add_chrdev_read_request(ide_drive_t *drive, int blocks) if (test_bit(IDE_AFLAG_FILEMARK, &drive->atapi_flags)) return 0; - idetape_init_read(drive); + idetape_init_rw(drive, IDETAPE_DIR_READ); return idetape_queue_rw_tail(drive, REQ_IDETAPE_READ, blocks); } @@ -1195,7 +1203,7 @@ static ssize_t idetape_chrdev_read(struct file *file, char __user *buf, (count % tape->blk_size) == 0) tape->user_bs_factor = count / tape->blk_size; } - rc = idetape_init_read(drive); + rc = idetape_init_rw(drive, IDETAPE_DIR_READ); if (rc < 0) return rc; if (count == 0) @@ -1249,6 +1257,7 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf, ssize_t actually_written = 0; ssize_t ret = 0; u16 ctl = *(u16 *)&tape->caps[12]; + int rc; /* The drive is write protected. */ if (tape->write_prot) @@ -1257,36 +1266,9 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf, debug_log(DBG_CHRDEV, "Enter %s, count %Zd\n", __func__, count); /* Initialize write operation */ - if (tape->chrdev_dir != IDETAPE_DIR_WRITE) { - if (tape->chrdev_dir == IDETAPE_DIR_READ) - ide_tape_discard_merge_buffer(drive, 1); - if (tape->buf || tape->valid) { - printk(KERN_ERR "ide-tape: valid should be 0 now\n"); - tape->valid = 0; - } - tape->buf = kmalloc(tape->buffer_size, GFP_KERNEL); - if (!tape->buf) - return -ENOMEM; - tape->chrdev_dir = IDETAPE_DIR_WRITE; - tape->cur = tape->buf; - - /* - * Issue a write 0 command to ensure that DSC handshake is - * switched from completion mode to buffer available mode. No - * point in issuing this if DSC overlap isn't supported, some - * drives (Seagate STT3401A) will return an error. - */ - if (drive->dev_flags & IDE_DFLAG_DSC_OVERLAP) { - ssize_t retval = idetape_queue_rw_tail(drive, - REQ_IDETAPE_WRITE, 0); - if (retval < 0) { - kfree(tape->buf); - tape->buf = NULL; - tape->chrdev_dir = IDETAPE_DIR_NONE; - return retval; - } - } - } + rc = idetape_init_rw(drive, IDETAPE_DIR_WRITE); + if (rc < 0) + return rc; if (count == 0) return (0); if (tape->valid < tape->buffer_size) { |