diff options
Diffstat (limited to 'drivers/ide')
| -rw-r--r-- | drivers/ide/ide-atapi.c | 15 | ||||
| -rw-r--r-- | drivers/ide/ide-floppy.c | 10 | ||||
| -rw-r--r-- | drivers/ide/ide-tape.c | 18 |
3 files changed, 14 insertions, 29 deletions
diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c index f46bc5124e0..b558663418d 100644 --- a/drivers/ide/ide-atapi.c +++ b/drivers/ide/ide-atapi.c @@ -246,7 +246,12 @@ int ide_scsi_expiry(ide_drive_t *drive) } EXPORT_SYMBOL_GPL(ide_scsi_expiry); -ide_startstop_t ide_pc_intr(ide_drive_t *drive, ide_handler_t *handler) +/* + * This is the usual interrupt handler which will be called during a packet + * command. We will transfer some of the data (as requested by the drive) + * and will re-point interrupt handler to us. + */ +static ide_startstop_t ide_pc_intr(ide_drive_t *drive) { struct ide_atapi_pc *pc = drive->pc; ide_hwif_t *hwif = drive->hwif; @@ -425,10 +430,9 @@ cmd_finished: rq->cmd[0], bcount); next_irq: /* And set the interrupt handler again */ - ide_set_handler(drive, handler, timeout, expiry); + ide_set_handler(drive, ide_pc_intr, timeout, expiry); return ide_started; } -EXPORT_SYMBOL_GPL(ide_pc_intr); static u8 ide_read_ireason(ide_drive_t *drive) { @@ -464,8 +468,7 @@ static u8 ide_wait_ireason(ide_drive_t *drive, u8 ireason) return ireason; } -ide_startstop_t ide_transfer_pc(ide_drive_t *drive, - ide_handler_t *handler, unsigned int timeout, +ide_startstop_t ide_transfer_pc(ide_drive_t *drive, unsigned int timeout, ide_expiry_t *expiry) { struct ide_atapi_pc *pc = drive->pc; @@ -491,7 +494,7 @@ ide_startstop_t ide_transfer_pc(ide_drive_t *drive, } /* Set the interrupt routine */ - ide_set_handler(drive, handler, timeout, expiry); + ide_set_handler(drive, ide_pc_intr, timeout, expiry); /* Begin DMA, if necessary */ if (pc->flags & PC_FLAG_DMA_OK) { diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 378a22ca55c..7be3cd5daa9 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -193,12 +193,6 @@ static void ide_floppy_callback(ide_drive_t *drive, int dsc) idefloppy_end_request(drive, uptodate, 0); } -/* The usual interrupt handler called during a packet command. */ -static ide_startstop_t idefloppy_pc_intr(ide_drive_t *drive) -{ - return ide_pc_intr(drive, idefloppy_pc_intr); -} - /* * What we have here is a classic case of a top half / bottom half interrupt * service routine. In interrupt mode, the device sends an interrupt to signal @@ -230,7 +224,7 @@ static ide_startstop_t idefloppy_start_pc_transfer(ide_drive_t *drive) * where the Busy flag was apparently being deasserted before the * unit was ready to receive data. This was happening on a * 1200 MHz Athlon system. 10/26/01 25msec is too short, - * 40 and 50msec work well. idefloppy_pc_intr will not be actually + * 40 and 50msec work well. ide_pc_intr will not be actually * used until after the packet is moved in about 50 msec. */ if (drive->atapi_flags & IDE_AFLAG_ZIP_DRIVE) { @@ -241,7 +235,7 @@ static ide_startstop_t idefloppy_start_pc_transfer(ide_drive_t *drive) expiry = NULL; } - return ide_transfer_pc(drive, idefloppy_pc_intr, timeout, expiry); + return ide_transfer_pc(drive, timeout, expiry); } static void ide_floppy_report_error(idefloppy_floppy_t *floppy, diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 5c26e98e2e3..a148de623af 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -619,18 +619,6 @@ static int ide_tape_io_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc, } /* - * This is the usual interrupt handler which will be called during a packet - * command. We will transfer some of the data (as requested by the drive) and - * will re-point interrupt handler to us. When data transfer is finished, we - * will act according to the algorithm described before - * idetape_issue_pc. - */ -static ide_startstop_t idetape_pc_intr(ide_drive_t *drive) -{ - return ide_pc_intr(drive, idetape_pc_intr); -} - -/* * Packet Command Interface * * The current Packet Command is available in drive->pc, and will not change @@ -640,9 +628,9 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive) * The handling will be done in three stages: * * 1. idetape_issue_pc will send the packet command to the drive, and will set - * the interrupt handler to idetape_pc_intr. + * the interrupt handler to ide_pc_intr. * - * 2. On each interrupt, idetape_pc_intr will be called. This step will be + * 2. On each interrupt, ide_pc_intr will be called. This step will be * repeated until the device signals us that no more interrupts will be issued. * * 3. ATAPI Tape media access commands have immediate status with a delayed @@ -668,7 +656,7 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive) */ static ide_startstop_t idetape_transfer_pc(ide_drive_t *drive) { - return ide_transfer_pc(drive, idetape_pc_intr, WAIT_TAPE_CMD, NULL); + return ide_transfer_pc(drive, WAIT_TAPE_CMD, NULL); } static ide_startstop_t idetape_issue_pc(ide_drive_t *drive, |