summaryrefslogtreecommitdiffstats
path: root/drivers/ide
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ide')
-rw-r--r--drivers/ide/Kconfig4
-rw-r--r--drivers/ide/cris/ide-cris.c3
-rw-r--r--drivers/ide/ide-io.c6
-rw-r--r--drivers/ide/ide-lib.c1
-rw-r--r--drivers/ide/pci/cmd64x.c5
-rw-r--r--drivers/ide/pci/cs5530.c3
-rw-r--r--drivers/ide/pci/it821x.c3
-rw-r--r--drivers/ide/pci/jmicron.c3
-rw-r--r--drivers/ide/pci/sc1200.c3
-rw-r--r--drivers/ide/pci/sis5513.c1
-rw-r--r--drivers/ide/ppc/pmac.c1
-rw-r--r--drivers/ide/setup-pci.c5
12 files changed, 11 insertions, 27 deletions
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index d1e8df18722..e445fe6e4ba 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -203,10 +203,6 @@ config BLK_DEV_IDECD
CD-ROM drive, you can say N to all other CD-ROM options, but be sure
to say Y or M to "ISO 9660 CD-ROM file system support".
- Note that older versions of LILO (LInux LOader) cannot properly deal
- with IDE/ATAPI CD-ROMs, so install LILO 16 or higher, available from
- <http://lilo.go.dyndns.org/>.
-
To compile this driver as a module, choose M here: the
module will be called ide-cd.
diff --git a/drivers/ide/cris/ide-cris.c b/drivers/ide/cris/ide-cris.c
index e196aefa207..7f5bc2ee6c7 100644
--- a/drivers/ide/cris/ide-cris.c
+++ b/drivers/ide/cris/ide-cris.c
@@ -748,8 +748,7 @@ static void cris_set_dma_mode(ide_drive_t *drive, const u8 speed)
hold = ATA_DMA2_HOLD;
break;
default:
- BUG();
- break;
+ return;
}
if (speed >= XFER_UDMA_0)
diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index 755011827af..db22d1ff4e5 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -885,7 +885,6 @@ static ide_startstop_t execute_drive_cmd (ide_drive_t *drive,
return do_rw_taskfile(drive, args);
} else if (rq->cmd_type == REQ_TYPE_ATA_TASK) {
u8 *args = rq->buffer;
- u8 sel;
if (!args)
goto done;
@@ -903,10 +902,7 @@ static ide_startstop_t execute_drive_cmd (ide_drive_t *drive,
hwif->OUTB(args[3], IDE_SECTOR_REG);
hwif->OUTB(args[4], IDE_LCYL_REG);
hwif->OUTB(args[5], IDE_HCYL_REG);
- sel = (args[6] & ~0x10);
- if (drive->select.b.unit)
- sel |= 0x10;
- hwif->OUTB(sel, IDE_SELECT_REG);
+ hwif->OUTB((args[6] & 0xEF)|drive->select.all, IDE_SELECT_REG);
ide_cmd(drive, args[0], args[2], &drive_cmd_intr);
return ide_started;
} else if (rq->cmd_type == REQ_TYPE_ATA_CMD) {
diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c
index af86433baed..1609b8604f5 100644
--- a/drivers/ide/ide-lib.c
+++ b/drivers/ide/ide-lib.c
@@ -514,6 +514,7 @@ static u8 ide_dump_ata_status(ide_drive_t *drive, const char *msg, u8 stat)
if (drive->addressing == 1) {
__u64 sectors = 0;
u32 low = 0, high = 0;
+ hwif->OUTB(drive->ctl&~0x80, IDE_CONTROL_REG);
low = ide_read_24(drive);
hwif->OUTB(drive->ctl|0x80, IDE_CONTROL_REG);
high = ide_read_24(drive);
diff --git a/drivers/ide/pci/cmd64x.c b/drivers/ide/pci/cmd64x.c
index ea0143ef5fe..51fca441c29 100644
--- a/drivers/ide/pci/cmd64x.c
+++ b/drivers/ide/pci/cmd64x.c
@@ -1,5 +1,5 @@
/*
- * linux/drivers/ide/pci/cmd64x.c Version 1.50 May 10, 2007
+ * linux/drivers/ide/pci/cmd64x.c Version 1.51 Nov 8, 2007
*
* cmd64x.c: Enable interrupts at initialization time on Ultra/PCI machines.
* Due to massive hardware bugs, UltraDMA is only supported
@@ -339,7 +339,8 @@ static int cmd648_ide_dma_end (ide_drive_t *drive)
u8 mrdmode = inb(hwif->dma_master + 0x01);
/* clear the interrupt bit */
- outb(mrdmode | irq_mask, hwif->dma_master + 0x01);
+ outb((mrdmode & ~(MRDMODE_INTR_CH0 | MRDMODE_INTR_CH1)) | irq_mask,
+ hwif->dma_master + 0x01);
return err;
}
diff --git a/drivers/ide/pci/cs5530.c b/drivers/ide/pci/cs5530.c
index 599408952bd..547690395ee 100644
--- a/drivers/ide/pci/cs5530.c
+++ b/drivers/ide/pci/cs5530.c
@@ -117,8 +117,7 @@ static void cs5530_set_dma_mode(ide_drive_t *drive, const u8 mode)
case XFER_MW_DMA_1: timings = 0x00012121; break;
case XFER_MW_DMA_2: timings = 0x00002020; break;
default:
- BUG();
- break;
+ return;
}
basereg = CS5530_BASEREG(drive->hwif);
reg = inl(basereg + 4); /* get drive0 config register */
diff --git a/drivers/ide/pci/it821x.c b/drivers/ide/pci/it821x.c
index 5c997543531..99b7d763b6c 100644
--- a/drivers/ide/pci/it821x.c
+++ b/drivers/ide/pci/it821x.c
@@ -653,8 +653,7 @@ static const struct ide_port_info it821x_chipsets[] __devinitdata = {
static int __devinit it821x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
- ide_setup_pci_device(dev, &it821x_chipsets[id->driver_data]);
- return 0;
+ return ide_setup_pci_device(dev, &it821x_chipsets[id->driver_data]);
}
static const struct pci_device_id it821x_pci_tbl[] = {
diff --git a/drivers/ide/pci/jmicron.c b/drivers/ide/pci/jmicron.c
index bdf64d99770..0083eaf89c7 100644
--- a/drivers/ide/pci/jmicron.c
+++ b/drivers/ide/pci/jmicron.c
@@ -139,8 +139,7 @@ static const struct ide_port_info jmicron_chipset __devinitdata = {
static int __devinit jmicron_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
- ide_setup_pci_device(dev, &jmicron_chipset);
- return 0;
+ return ide_setup_pci_device(dev, &jmicron_chipset);
}
/* All JMB PATA controllers have and will continue to have the same
diff --git a/drivers/ide/pci/sc1200.c b/drivers/ide/pci/sc1200.c
index 0a7b3202066..707d5ff66b0 100644
--- a/drivers/ide/pci/sc1200.c
+++ b/drivers/ide/pci/sc1200.c
@@ -186,8 +186,7 @@ static void sc1200_set_dma_mode(ide_drive_t *drive, const u8 mode)
}
break;
default:
- BUG();
- break;
+ return;
}
if (unit == 0) { /* are we configuring drive0? */
diff --git a/drivers/ide/pci/sis5513.c b/drivers/ide/pci/sis5513.c
index 6b7bb53acef..f6e2ab3dd16 100644
--- a/drivers/ide/pci/sis5513.c
+++ b/drivers/ide/pci/sis5513.c
@@ -356,7 +356,6 @@ static void sis_set_dma_mode(ide_drive_t *drive, const u8 speed)
sis_program_timings(drive, speed);
break;
default:
- BUG();
break;
}
}
diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c
index 816b5311dad..5afdfef7264 100644
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -1138,6 +1138,7 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif)
hwif->drives[0].autotune = IDE_TUNE_AUTO;
hwif->drives[1].autotune = IDE_TUNE_AUTO;
hwif->host_flags = IDE_HFLAG_SET_PIO_MODE_KEEP_DMA |
+ IDE_HFLAG_PIO_NO_DOWNGRADE |
IDE_HFLAG_POST_SET_MODE;
hwif->pio_mask = ATA_PIO4;
hwif->set_pio_mode = pmac_ide_set_pio_mode;
diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c
index 02d14bf85ab..25fd0905322 100644
--- a/drivers/ide/setup-pci.c
+++ b/drivers/ide/setup-pci.c
@@ -7,11 +7,6 @@
* May be copied or modified under the terms of the GNU General Public License
*/
-/*
- * This module provides support for automatic detection and
- * configuration of all PCI IDE interfaces present in a system.
- */
-
#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-03-04 03:52:10 +0000